LEAD TUBE FOR MANUFACTURE OF FLSC-10 CHARGES CONFIRMING TO THE SPECIFICATION -IND/ME 911 DC 5433-ME DT. 18.04.16 1)LEAD PURITY=99.5% MIN. 2)M.P.=315 DEG.CENTI. MIN.3)OD=20.5 1.5MM 4)ID=12.7 1.0MM 5)WALL THICKNESS 3.90 0.25MM 6)LENGTH OF EACH LEAD TUBE=3805MM.
Specification
LEAD TUBE FOR MANUFACTURE OF FLSC-10 CHARGES CONFIRMING TO THE SPECIFICATION -IND/ME 911 DC 5433-ME DT. 18.04.16 1)LEAD PURITY=99.5% MIN. 2)M.P.=315 DEG.CENTI. MIN.3)OD=20.5 1.5MM 4)ID=12.7 1.0MM 5)WALL THICKNESS 3.90 0.25MM 6)LENGTH OF EACH LEAD TUBE=3805MM.
LEAD TUBE FOR MANUFACTURE OF FLSC-10 CHARGES CONFIRMING TO THE SPECIFICATION -IND/ME 911 DC 5433-ME DT. 18.04.16 1)LEAD PURITY=99.5% MIN. 2)M.P.=315 DEG.CENTI. MIN.3)OD=20.5 1.5MM 4)ID=12.7 1.0MM 5)WALL THICKNESS 3.90 0.25MM 6)LENGTH OF EACH LEAD TUBE=3805MM.
LEAD TUBE FOR CLC-3,SPECIFICATION IS 404 : 1993 (REAFFIRMED 2019),PART-1,GRADE-1 PURITY:NOT LESS THAN 99.8%,OD:26.0 (0.2)MM & ID:20.5 ( 0.2)MM LENGTH:820 MM,THICKNESS VARIATION 0.4 MM
Specification
LEAD TUBE FOR CLC-3,SPECIFICATION IS 404 : 1993 (REAFFIRMED 2019),PART-1,GRADE-1 PURITY:NOT LESS THAN 99.8%,OD:26.0 (0.2)MM & ID:20.5 ( 0.2)MM LENGTH:820 MM,THICKNESS VARIATION 0.4 MM
LEAD TUBE FOR CLC-3,SPECIFICATION IS 404 : 1993 (REAFFIRMED 2019),PART-1,GRADE-1 PURITY:NOT LESS THAN 99.8%,OD:26.0 (0.2)MM & ID:20.5 ( 0.2)MM LENGTH:820 MM,THICKNESS VARIATION 0.4 MM
LEAD TUBE FOR CLC-4 SPECIFICATIONIS 404 : 1993 (REAFFIRMED 2019), PART-1.GRADE-1 LEAD PURITY:99.8 % (MIN) DIMENTION:ID:240.2 MM. OD:290.2 MM. THICKNESS VERIATION:0.4 MM. LENGHT OF COIL 4 MTR
Specification
LEAD TUBE FOR CLC-4 SPECIFICATIONIS 404 : 1993 (REAFFIRMED 2019), PART-1.GRADE-1 LEAD PURITY:99.8 % (MIN) DIMENTION:ID:240.2 MM. OD:290.2 MM. THICKNESS VERIATION:0.4 MM. LENGHT OF COIL 4 MTR
LEAD TUBE FOR CLC-4 SPECIFICATIONIS 404 : 1993 (REAFFIRMED 2019), PART-1.GRADE-1 LEAD PURITY:99.8 % (MIN) DIMENTION:ID:240.2 MM. OD:290.2 MM. THICKNESS VERIATION:0.4 MM. LENGHT OF COIL 4 MTR
LEAD TUBE FOR CLC-3,SPECIFICATION IS 404 : 1993 (REAFFIRMED 2019),PART-1,GRADE-1 PURITY:NOT LESS THAN 99.8%,OD:26.0 (0.2)MM & ID:20.5 ( 0.2)MM LENGTH:820 MM,THICKNESS VARIATION 0.4 MM
Specification
LEAD TUBE FOR CLC-3,SPECIFICATION IS 404 : 1993 (REAFFIRMED 2019),PART-1,GRADE-1 PURITY:NOT LESS THAN 99.8%,OD:26.0 (0.2)MM & ID:20.5 ( 0.2)MM LENGTH:820 MM,THICKNESS VARIATION 0.4 MM
LEAD TUBE FOR CLC-3,SPECIFICATION IS 404 : 1993 (REAFFIRMED 2019),PART-1,GRADE-1 PURITY:NOT LESS THAN 99.8%,OD:26.0 (0.2)MM & ID:20.5 ( 0.2)MM LENGTH:820 MM,THICKNESS VARIATION 0.4 MM
LEAD TUBE FOR CLC-1 SPECIFICATIONIS 404 : PART 1 : 1993 (REAFFIRMED 2019),GRADE-1. LEAD PURITY:99.8 % (MIN). DIMENTION:ID=160.2 MM.DO=230.2 MM. THICKNESS VARIATION:0.4 MM.LENGHT OF COIL 4 MTR
Specification
LEAD TUBE FOR CLC-1 SPECIFICATIONIS 404 : PART 1 : 1993 (REAFFIRMED 2019),GRADE-1. LEAD PURITY:99.8 % (MIN). DIMENTION:ID=160.2 MM.DO=230.2 MM. THICKNESS VARIATION:0.4 MM.LENGHT OF COIL 4 MTR
LEAD TUBE FOR CLC-1 SPECIFICATIONIS 404 : PART 1 : 1993 (REAFFIRMED 2019),GRADE-1. LEAD PURITY:99.8 % (MIN). DIMENTION:ID=160.2 MM.DO=230.2 MM. THICKNESS VARIATION:0.4 MM.LENGHT OF COIL 4 MTR
GLYCERINE FOR NITRATION TO SPECN.NO. JSS-6810-109:2013 REVISION NO 3, DC 5219-ME DTD.12.04.14. ALONGWITH SULPHURIC ACID COLOURATION TEST. THE GLYCERINE MUST PASS THROUGH THE SULPHURIC ACID COLOURATION TEST.
Specification
GLYCERINE FOR NITRATION TO SPECN.NO. JSS-6810-109:2013 REVISION NO 3, DC 5219-ME DTD.12.04.14. ALONGWITH SULPHURIC ACID COLOURATION TEST. THE GLYCERINE MUST PASS THROUGH THE SULPHURIC ACID COLOURATION TEST.
GLYCERINE FOR NITRATION TO SPECN.NO. JSS-6810-109:2013 REVISION NO 3, DC 5219-ME DTD.12.04.14. ALONGWITH SULPHURIC ACID COLOURATION TEST. THE GLYCERINE MUST PASS THROUGH THE SULPHURIC ACID COLOURATION TEST.
CAUSTIC SODA:PURITY= 95.0% MIN, . AND COLOUR= WHITE POWDER FREE FROM FOREIGN MATTER MOISTURE CONTENT= 3.0% MAX AS PER JSS: 0112 REV NO 02, METHOD NO 1(B), REFER LY/39/A/NE/C DT 30.01.2020.PURITY AS PER IS 252-2013 Reaffirmed 2018 Rev 4 OR 17.1 BY M/S BMP ITALY ENCLOSED,
Specification
CAUSTIC SODA:PURITY= 95.0% MIN, . AND COLOUR= WHITE POWDER FREE FROM FOREIGN MATTER MOISTURE CONTENT= 3.0% MAX AS PER JSS: 0112 REV NO 02, METHOD NO 1(B), REFER LY/39/A/NE/C DT 30.01.2020.PURITY AS PER IS 252-2013 Reaffirmed 2018 Rev 4 OR 17.1 BY M/S BMP ITALY ENCLOSED,
CAUSTIC SODA:PURITY= 95.0% MIN, . AND COLOUR= WHITE POWDER FREE FROM FOREIGN MATTER MOISTURE CONTENT= 3.0% MAX AS PER JSS: 0112 REV NO 02, METHOD NO 1(B), REFER LY/39/A/NE/C DT 30.01.2020.PURITY AS PER IS 252-2013 Reaffirmed 2018 Rev 4 OR 17.1 BY M/S BMP ITALY ENCLOSED,
Cloth Drill Cotton Disruptive Pattern 142cm Minimum Width to be used in Smoke Denison
Specification:- PROV/S/4112/TC-11/2009-05. As per schedule no. CIT&C/PMS/36(d). As per CQA(T&C)Kanpur QAI No. CQA(T&C)/QAI/99 TC-11
Specification
Cloth Drill Cotton Disruptive Pattern 142cm Minimum Width to be used in Smoke Denison
Specification:- PROV/S/4112/TC-11/2009-05. As per schedule no. CIT&C/PMS/36(d). As per CQA(T&C)Kanpur QAI No. CQA(T&C)/QAI/99 TC-11
Drawing no.
Manufacturing Technology
as per attached list (Manufacturing Technology Files )
EXPANDED POLYSTYRENE SELF EXTINGUISHING TYPE(TYPE 2) DENSITY 30 KG/CU.M.CONFORMING TO CLAUSE 4.5.1 OF SPECIFICATION IS: 4671-1984 ( FIRST REV.) REAFFIRMED 2017 TO CQA(A) DRAWING NO 13981-1.0 DC 35707-A DTD 5-5-94 SIZE 108MM PLUS MINUS 2MM X 108MM PLUS MINUS 2MM X 64MM PLUS MINUS 2MM.
Specification
EXPANDED POLYSTYRENE SELF EXTINGUISHING TYPE(TYPE 2) DENSITY 30 KG/CU.M.CONFORMING TO CLAUSE 4.5.1 OF SPECIFICATION IS: 4671-1984 ( FIRST REV.) REAFFIRMED 2017 TO CQA(A) DRAWING NO 13981-1.0 DC 35707-A DTD 5-5-94 SIZE 108MM PLUS MINUS 2MM X 108MM PLUS MINUS 2MM X 64MM PLUS MINUS 2MM.
EXPANDED POLYSTYRENE SELF EXTINGUISHING TYPE(TYPE 2) DENSITY 30 KG/CU.M.CONFORMING TO CLAUSE 4.5.1 OF SPECIFICATION IS: 4671-1984 ( FIRST REV.) REAFFIRMED 2017 TO CQA(A) DRAWING NO 13981-1.0 DC 35707-A DTD 5-5-94 SIZE 108MM PLUS MINUS 2MM X 108MM PLUS MINUS 2MM X 64MM PLUS MINUS 2MM.
DIOCTYLE PHTHALATE AS PER SPECN.NO. IS 14421:1997 REAFFIRMED -2018. TEST TO BE CARRIED OUT FOR CHARACTERISTICS,1)RELATIVE DENSITY 2)REFRACTIVE INDEX 3)WATER CONTENT 4)ACID VALUE 5) ESTER (SAPHONIFICATION) VALUE
Specification
DIOCTYLE PHTHALATE AS PER SPECN.NO. IS 14421:1997 REAFFIRMED -2018. TEST TO BE CARRIED OUT FOR CHARACTERISTICS,1)RELATIVE DENSITY 2)REFRACTIVE INDEX 3)WATER CONTENT 4)ACID VALUE 5) ESTER (SAPHONIFICATION) VALUE
DIOCTYLE PHTHALATE AS PER SPECN.NO. IS 14421:1997 REAFFIRMED -2018. TEST TO BE CARRIED OUT FOR CHARACTERISTICS,1)RELATIVE DENSITY 2)REFRACTIVE INDEX 3)WATER CONTENT 4)ACID VALUE 5) ESTER (SAPHONIFICATION) VALUE
SPECN: IS 9591: 1996 (REAFFIRMED-2018)
1)RELATIVE DENSITY AT 20DEG C 0.913 TO 0.919G/CC2)REFRACTIVEINDEXAT 20 DEGC 1.450-1.454.3)WATER CONTENT:0.1%(MAX)4)ASH%:0.01(MAX) 5)ACIDITY(AS SEBACIC ACID):0.02%(MAX)6)ESTER CONTENT:99.5% (MIN) 7)MATTER OXIDIZABLE BY POTASSIUM DICHROMATE :0.3 % MAX
Specification
SPECN: IS 9591: 1996 (REAFFIRMED-2018)
1)RELATIVE DENSITY AT 20DEG C 0.913 TO 0.919G/CC2)REFRACTIVEINDEXAT 20 DEGC 1.450-1.454.3)WATER CONTENT:0.1%(MAX)4)ASH%:0.01(MAX) 5)ACIDITY(AS SEBACIC ACID):0.02%(MAX)6)ESTER CONTENT:99.5% (MIN) 7)MATTER OXIDIZABLE BY POTASSIUM DICHROMATE :0.3 % MAX
SPECN: IS 9591: 1996 (REAFFIRMED-2018)
1)RELATIVE DENSITY AT 20DEG C 0.913 TO 0.919G/CC2)REFRACTIVEINDEXAT 20 DEGC 1.450-1.454.3)WATER CONTENT:0.1%(MAX)4)ASH%:0.01(MAX) 5)ACIDITY(AS SEBACIC ACID):0.02%(MAX)6)ESTER CONTENT:99.5% (MIN) 7)MATTER OXIDIZABLE BY POTASSIUM DICHROMATE :0.3 % MAX
DRG.NO.-OFBA/BT/52 G/1, OFBA/BT/52 G/1/1, OFBA/BT/53G/1, OFBA/BT/53G/1/1 INNER BOX TO BE WAX COATED INSIDE AND OUTSIDE SURFACE. OUTER BOX TO BE WAX COATED INSIDE SURFACE ONLY.
Specification
DRG.NO.-OFBA/BT/52 G/1, OFBA/BT/52 G/1/1, OFBA/BT/53G/1, OFBA/BT/53G/1/1 INNER BOX TO BE WAX COATED INSIDE AND OUTSIDE SURFACE. OUTER BOX TO BE WAX COATED INSIDE SURFACE ONLY.
DRG.NO.-OFBA/BT/52 G/1, OFBA/BT/52 G/1/1, OFBA/BT/53G/1, OFBA/BT/53G/1/1 INNER BOX TO BE WAX COATED INSIDE AND OUTSIDE SURFACE. OUTER BOX TO BE WAX COATED INSIDE SURFACE ONLY.
COLD ROLLED STEEL STRIPS. WIDTH 3/4 " THICKNESS- 0.80-PLUS,MINUS 0.04MM.NOTE;MATERIAL SHOULD CONFRM TO IS-5872-1990 REAFFIRMED-2015(II REV)GRADE I SUAITABLY BLUED FOR RUSTPROOF. TEST REPORT OF MAT. FROM GOVT.APPROVED LAB IS REQUIRED FOR CHEM.COMP & MECH.PROPERTS
Specification
COLD ROLLED STEEL STRIPS. WIDTH 3/4 " THICKNESS- 0.80-PLUS,MINUS 0.04MM.NOTE;MATERIAL SHOULD CONFRM TO IS-5872-1990 REAFFIRMED-2015(II REV)GRADE I SUAITABLY BLUED FOR RUSTPROOF. TEST REPORT OF MAT. FROM GOVT.APPROVED LAB IS REQUIRED FOR CHEM.COMP & MECH.PROPERTS
COLD ROLLED STEEL STRIPS. WIDTH 3/4 " THICKNESS- 0.80-PLUS,MINUS 0.04MM.NOTE;MATERIAL SHOULD CONFRM TO IS-5872-1990 REAFFIRMED-2015(II REV)GRADE I SUAITABLY BLUED FOR RUSTPROOF. TEST REPORT OF MAT. FROM GOVT.APPROVED LAB IS REQUIRED FOR CHEM.COMP & MECH.PROPERTS
BLEACHED COTTON LINTERS SHALL CONFORM TO SPECIFICATION JSS: 8305-14 : 2020 (REVISION NO.5) INCLUDING CLAUSE 7.4.2. THE DYNAMIC VISCOSITY OF THE STORE SHOULD BE BETWEEN 10 TO 30 POISE FOR O.F.BHANDARA AGAINST THE DYNAMIC VISCOSITY RANGE 5 TO 50 POISE.
Specification
BLEACHED COTTON LINTERS SHALL CONFORM TO SPECIFICATION JSS: 8305-14 : 2020 (REVISION NO.5) INCLUDING CLAUSE 7.4.2. THE DYNAMIC VISCOSITY OF THE STORE SHOULD BE BETWEEN 10 TO 30 POISE FOR O.F.BHANDARA AGAINST THE DYNAMIC VISCOSITY RANGE 5 TO 50 POISE.
BLEACHED COTTON LINTERS SHALL CONFORM TO SPECIFICATION JSS: 8305-14 : 2020 (REVISION NO.5) INCLUDING CLAUSE 7.4.2. THE DYNAMIC VISCOSITY OF THE STORE SHOULD BE BETWEEN 10 TO 30 POISE FOR O.F.BHANDARA AGAINST THE DYNAMIC VISCOSITY RANGE 5 TO 50 POISE.
BAG COTTON CALICO(bleached)FOR NCP 50KG CAPACITY TO DRG.NO. OFBA/NR/251/2, MATERIAL OF CLOTH CALICO BLEACHED CONFORMING TO VARIETY NO.3 OF IS:5088-1982 REAFFIRMED 2017
Specification
BAG COTTON CALICO(bleached)FOR NCP 50KG CAPACITY TO DRG.NO. OFBA/NR/251/2, MATERIAL OF CLOTH CALICO BLEACHED CONFORMING TO VARIETY NO.3 OF IS:5088-1982 REAFFIRMED 2017
BAG COTTON CALICO(bleached)FOR NCP 50KG CAPACITY TO DRG.NO. OFBA/NR/251/2, MATERIAL OF CLOTH CALICO BLEACHED CONFORMING TO VARIETY NO.3 OF IS:5088-1982 REAFFIRMED 2017
BAG CAMBRIC 15 KG CAP. AS PER DRG.NO.NEFB/NCP/26 DT 01.07.64 MADE OF CLOTH.CAMBRIC WHITE - VARIETY NO.2 OF IS : 5088-1982 REAFFIRMED1996 AMND1&2(COTTON TEXTILE FOR AMMN)THREAD COTTON WHITE SEWING 16 x 6 UNPROOFED DYED TO JSS-8310-02-1994 DC. NO.3277 DT 21.2 95(REV I) TO BE USED FOR STITCH OF BAG.
Specification
BAG CAMBRIC 15 KG CAP. AS PER DRG.NO.NEFB/NCP/26 DT 01.07.64 MADE OF CLOTH.CAMBRIC WHITE - VARIETY NO.2 OF IS : 5088-1982 REAFFIRMED1996 AMND1&2(COTTON TEXTILE FOR AMMN)THREAD COTTON WHITE SEWING 16 x 6 UNPROOFED DYED TO JSS-8310-02-1994 DC. NO.3277 DT 21.2 95(REV I) TO BE USED FOR STITCH OF BAG.
BAG CAMBRIC 15 KG CAP. AS PER DRG.NO.NEFB/NCP/26 DT 01.07.64 MADE OF CLOTH.CAMBRIC WHITE - VARIETY NO.2 OF IS : 5088-1982 REAFFIRMED1996 AMND1&2(COTTON TEXTILE FOR AMMN)THREAD COTTON WHITE SEWING 16 x 6 UNPROOFED DYED TO JSS-8310-02-1994 DC. NO.3277 DT 21.2 95(REV I) TO BE USED FOR STITCH OF BAG.
AMMONIA ANHYDROUS GRADE-2 TO SPECIFICATION IS/662/1980. REAFFIRMED 2003WITH AMENDMENT 1,2,3&4 WITH THE FOLLOWING REQUIREMENTS 1)PURITY 99.5% MIN(2) OIL CONTENT- 0.002% MAXM. AND OTHER PARAMETERS TO CONFIRM TO IS -662-1980 GR-2 (FIRST REVISION) REAFFIRMED-2003 WITH AMENDMENT 1,2,3&4.
Specification
AMMONIA ANHYDROUS GRADE-2 TO SPECIFICATION IS/662/1980. REAFFIRMED 2003WITH AMENDMENT 1,2,3&4 WITH THE FOLLOWING REQUIREMENTS 1)PURITY 99.5% MIN(2) OIL CONTENT- 0.002% MAXM. AND OTHER PARAMETERS TO CONFIRM TO IS -662-1980 GR-2 (FIRST REVISION) REAFFIRMED-2003 WITH AMENDMENT 1,2,3&4.
ALUMINIUM POWDER HEAVY GRADE-I CONFORMING TO SPECIFICATION JSS-1370-03-2014 REVISION NO -3 DC 5297-ME DATED 16.12.2014 HEAVY GRADE SIZE 125 MICROMETER.
Specification
ALUMINIUM POWDER HEAVY GRADE-I CONFORMING TO SPECIFICATION JSS-1370-03-2014 REVISION NO -3 DC 5297-ME DATED 16.12.2014 HEAVY GRADE SIZE 125 MICROMETER.
ALUMINIUM POWDER HEAVY GRADE-I CONFORMING TO SPECIFICATION JSS-1370-03-2014 REVISION NO -3 DC 5297-ME DATED 16.12.2014 HEAVY GRADE SIZE 125 MICROMETER.
1) Chemical & Mechanical properties as per std. given drawing /Specification.
2) Dimensional inspection for all dimensions given in the drawing & other parameter which are mentioned in relevant drawing/specification.
1) Chemical & Mechanical properties as per std. given drawing /Specification.
2) Dimensional inspection for all dimensions given in the drawing & other parameter which are mentioned in relevant drawing/specification.
70
2500
Number
4246
EOI/PROVISIONAL/REGULARIZATION
Ordnance Equipment Factory
The General Manager,
Kanpur
Kanpur
Kanpur, Uttar Pradesh
208001
SPIRIT DENATURED SPECIAL PREPARED USING RECTIFIED SPIRIT TO IS 323-2009 REVISED (Reaffirmed - 2019) WITH ACIDITY NOT EXCEEDING 0.005% AND ALDEHYDE CONTENT 0.0 06 G/100 ML MAX. DENATURED WITH 1% DIETHYL ETHER TO IS 336 : 1973 (REAFFIRMED 2018) Revision 2 .
Specification
SPIRIT DENATURED SPECIAL PREPARED USING RECTIFIED SPIRIT TO IS 323-2009 REVISED (Reaffirmed - 2019) WITH ACIDITY NOT EXCEEDING 0.005% AND ALDEHYDE CONTENT 0.0 06 G/100 ML MAX. DENATURED WITH 1% DIETHYL ETHER TO IS 336 : 1973 (REAFFIRMED 2018) Revision 2 .
SPIRIT DENATURED SPECIAL PREPARED USING RECTIFIED SPIRIT TO IS 323-2009 REVISED (Reaffirmed - 2019) WITH ACIDITY NOT EXCEEDING 0.005% AND ALDEHYDE CONTENT 0.0 06 G/100 ML MAX. DENATURED WITH 1% DIETHYL ETHER TO IS 336 : 1973 (REAFFIRMED 2018) Revision 2 .
10
766
Hectolitre
4247
2019DTE121
Ordnance Cable Factory Chandigarh
The General Manager,
Chandigarh
Chandigarh
Chandigarh
160002
SUPPLY OF CO2 GAS CYLINDER ON REQUIREMENT AND REPLACEMENT BASIS,(EMPTY CYLINDERS WILL BE TAKEN BY THE FIRM AND FILLED CLYLINDERS WILL BE SUPPLIED BY THE FIRM)
Specification
SUPPLY OF CO2 GAS CYLINDER ON REQUIREMENT AND REPLACEMENT BASIS,(EMPTY CYLINDERS WILL BE TAKEN BY THE FIRM AND FILLED CLYLINDERS WILL BE SUPPLIED BY THE FIRM)
Drawing no.
Manufacturing Technology
SUPPLY OF CO2 GAS CYLINDER ON REQUIREMENT AND REPLACEMENT BASIS,(EMPTY CYLINDERS WILL BE TAKEN BY THE FIRM AND FILLED CLYLINDERS WILL BE SUPPLIED BY THE FIRM)
EXPANDED CROSS LINKED POLYETHYLENE FOAM BASED CUSHIONING MATERIAL FOR PACKING OF AMMUNITION AS PER SPECIFICATION No.IND/ME/1023 (PROV),DC No.5111-ME DATED : 27/04/2013. EACH SET CONSIST OF SIZES : 1) 470 X 180 X 10 MM – 8 NOS/SET. (2) 160 X 170 X 20MM - 4 NOS. / SET. (3) 90 X 140 X 32MM -1 NO/SET. (4) 410 X 165 X 25 MM-1 NO./SET.
Specification
EXPANDED CROSS LINKED POLYETHYLENE FOAM BASED CUSHIONING MATERIAL FOR PACKING OF AMMUNITION AS PER SPECIFICATION No.IND/ME/1023 (PROV),DC No.5111-ME DATED : 27/04/2013. EACH SET CONSIST OF SIZES : 1) 470 X 180 X 10 MM – 8 NOS/SET. (2) 160 X 170 X 20MM - 4 NOS. / SET. (3) 90 X 140 X 32MM -1 NO/SET. (4) 410 X 165 X 25 MM-1 NO./SET.
EXPANDED CROSS LINKED POLYETHYLENE FOAM BASED CUSHIONING MATERIAL FOR PACKING OF AMMUNITION AS PER SPECIFICATION No.IND/ME/1023 (PROV),DC No.5111-ME DATED : 27/04/2013. EACH SET CONSIST OF SIZES : 1) 470 X 180 X 10 MM – 8 NOS/SET. (2) 160 X 170 X 20MM - 4 NOS. / SET. (3) 90 X 140 X 32MM -1 NO/SET. (4) 410 X 165 X 25 MM-1 NO./SET.
EXPANDED CROSS LINKED POLYETHYLENE FOAM BASED CUSHIONING MATERIAL FOR PACKING OF AMMUNITION AS PER SPECIFICATION No.IND/ME/1023 (PROV),DC No.5111-ME DATED : 27/04/2013. EACH SET CONSIST OF SIZES : 1) 470 X 180 X 10 MM – 4 NOS/SET. (2) 170 X 160 X 20MM-2 NOS/SET. (3) 135 X 160 X 40MM-1 NO/SET. (4) 410 X 160 X 25 MM-1 NO./SET.
Specification
EXPANDED CROSS LINKED POLYETHYLENE FOAM BASED CUSHIONING MATERIAL FOR PACKING OF AMMUNITION AS PER SPECIFICATION No.IND/ME/1023 (PROV),DC No.5111-ME DATED : 27/04/2013. EACH SET CONSIST OF SIZES : 1) 470 X 180 X 10 MM – 4 NOS/SET. (2) 170 X 160 X 20MM-2 NOS/SET. (3) 135 X 160 X 40MM-1 NO/SET. (4) 410 X 160 X 25 MM-1 NO./SET.
GLYCERINE FOR NITRATION TO SPECN.NO. JSS-6810-109:2013 REVISION NO 3, DC 5219-ME DTD.12.04.14. ALONGWITH SULPHURIC ACID COLOURATION TEST. THE GLYCERINE MUST PASS THROUGH THE SULPHURIC ACID COLOURATION TEST.
Specification
GLYCERINE FOR NITRATION TO SPECN.NO. JSS-6810-109:2013 REVISION NO 3, DC 5219-ME DTD.12.04.14. ALONGWITH SULPHURIC ACID COLOURATION TEST. THE GLYCERINE MUST PASS THROUGH THE SULPHURIC ACID COLOURATION TEST.
GLYCERINE FOR NITRATION TO SPECN.NO. JSS-6810-109:2013 REVISION NO 3, DC 5219-ME DTD.12.04.14. ALONGWITH SULPHURIC ACID COLOURATION TEST. THE GLYCERINE MUST PASS THROUGH THE SULPHURIC ACID COLOURATION TEST.
EXPANDED CROSS LINKED POLYETHYLENE FOAM BASED CUSHIONING MATERIAL FOR PACKING OF AMMUNITION AS PER SPECIFICATION No.IND/ME/1023 (PROV),DC No.5111-ME DATED : 27/04/2013.
Specification
EXPANDED CROSS LINKED POLYETHYLENE FOAM BASED CUSHIONING MATERIAL FOR PACKING OF AMMUNITION AS PER SPECIFICATION No.IND/ME/1023 (PROV),DC No.5111-ME DATED : 27/04/2013.
EXPANDED CROSS LINKED POLYETHYLENE FOAM BASED CUSHIONING MATERIAL FOR PACKING OF AMMUNITION AS PER SPECIFICATION No.IND/ME/1023 (PROV),DC No.5111-ME DATED : 27/04/2013.
STRONG NITRIC ACID CONFORMING TO IS:264:2005(Reaffirmed Year : 2017 ) EXPLOSIVE GR.WITH SPECIFIC REQURIMENET TO FOLLOWING CLAUSES OF TABLE-I CLAUSE 4.2 TOTAL ACIDITY (AS HNO3)% BY MASS MINIMUM 98.5% NITRIOUS ACID MAX 0.08% BY MASS(AS HNO2) SULPHATE NOT MORE THAN 0.2%.
Specification
STRONG NITRIC ACID CONFORMING TO IS:264:2005(Reaffirmed Year : 2017 ) EXPLOSIVE GR.WITH SPECIFIC REQURIMENET TO FOLLOWING CLAUSES OF TABLE-I CLAUSE 4.2 TOTAL ACIDITY (AS HNO3)% BY MASS MINIMUM 98.5% NITRIOUS ACID MAX 0.08% BY MASS(AS HNO2) SULPHATE NOT MORE THAN 0.2%.
STRONG NITRIC ACID CONFORMING TO IS:264:2005(Reaffirmed Year : 2017 ) EXPLOSIVE GR.WITH SPECIFIC REQURIMENET TO FOLLOWING CLAUSES OF TABLE-I CLAUSE 4.2 TOTAL ACIDITY (AS HNO3)% BY MASS MINIMUM 98.5% NITRIOUS ACID MAX 0.08% BY MASS(AS HNO2) SULPHATE NOT MORE THAN 0.2%.
GROUND STEEL ROD TO SPECIFICATION IS: 5517 GR 40Ni6Cr4Mo3 IN HARDENED CONDITION TO SIZE DIA 11MM+/-0.05MM IN STRAIGHT LENGTH OF 2 TO 3 METERS. HARDNESS – 300 to 340HV
Specification
GROUND STEEL ROD TO SPECIFICATION IS: 5517 GR 40Ni6Cr4Mo3 IN HARDENED CONDITION TO SIZE DIA 11MM+/-0.05MM IN STRAIGHT LENGTH OF 2 TO 3 METERS. HARDNESS – 300 to 340HV
GROUND STEEL ROD TO SPECIFICATION IS:5517 GR 40Ni6Cr4Mo3 IN HARDENED CONDITION TO SIZE DIA 17MM+/-0.05MM IN STRAIGHT LENGTH OF 2 TO 3 METERS.HARDNESS – 300 to 340HV
Specification
GROUND STEEL ROD TO SPECIFICATION IS:5517 GR 40Ni6Cr4Mo3 IN HARDENED CONDITION TO SIZE DIA 17MM+/-0.05MM IN STRAIGHT LENGTH OF 2 TO 3 METERS.HARDNESS – 300 to 340HV
