BRASS STRIP 102 +/-0.5 MM WIDE X 3.66 +/-0.05 MM THICK IN LENGTH OF 2.5 TO 3 METERS TO SPECN:BS2871 PART 2:1972:CZ126 CONDITION M (STRESS RELIEVED) OR JSS 9535-02:2008(REVISION NO.3)(ANNEALED).
STEEL ROD 32 [+0.00/-0.10] MM DIA IN STRAIGHT LENGTH OF 2.5 TO 3 MTRS TO SPECN:- GOST-V-10230-75 STEEL GRADE S-35 HGS.(CHEMICAL COMPOSITION AND PHYSICAL PROPERTIES AS PER SPECN.OFK IN HOUSE STD NO.ML :001 SHT 1 OF 1 DATED 11-06-2002.ISSUE NO.4 (ENCLOSED ).
Specification
STEEL ROD 32 [+0.00/-0.10] MM DIA IN STRAIGHT LENGTH OF 2.5 TO 3 MTRS TO SPECN:- GOST-V-10230-75 STEEL GRADE S-35 HGS.(CHEMICAL COMPOSITION AND PHYSICAL PROPERTIES AS PER SPECN.OFK IN HOUSE STD NO.ML :001 SHT 1 OF 1 DATED 11-06-2002.ISSUE NO.4 (ENCLOSED ).
Drawing no.
STEEL ROD 32 [+0.00/-0.10] MM DIA IN STRAIGHT LENGTH OF 2.5 TO 3 MTRS TO SPECN:- GOST-V-10230-75 STEEL GRADE S-35 HGS.(CHEMICAL COMPOSITION AND PHYSICAL PROPERTIES AS PER SPECN.OFK IN HOUSE STD NO.ML :001 SHT 1 OF 1 DATED 11-06-2002.ISSUE NO.4 (ENCLO
STEEL ROD 32(+0.10/-0.00)MM DIA,REELED,GROUND FINISH IN STRAIGHT LENTH OF 2 TO 2.5 MTR.TO SPECN: STEEL GRADE 50TY-14-1-2884-80 WITH PHYSICAL AND CHEMICAL PROPERTIES ASPER SPECN NO.: ML 002 SHT.1 OF1 REVISION NO.3 DATED 23-7-20ENCLOSED.MATERIAL SHOULD BE FREE FROM CRACKS,FLAWS,ROLLING,LAPS ETC & SHOULD BE SUBJECTED TO 100% CRACK DETECTION BYULTRASONIC METHOD.BOTH HARDENED END OF EACH ROD SHOULD BEPARTED,SQUARED AND CHAMFERED OF 3MM X 45 DEG. CIRCULAROVALITY 0.020MM MAXIMUM.ALL RODS ARE TO BE STRAIGHT.
Specification
STEEL ROD 32(+0.10/-0.00)MM DIA,REELED,GROUND FINISH IN STRAIGHT LENTH OF 2 TO 2.5 MTR.TO SPECN: STEEL GRADE 50TY-14-1-2884-80 WITH PHYSICAL AND CHEMICAL PROPERTIES ASPER SPECN NO.: ML 002 SHT.1 OF1 REVISION NO.3 DATED 23-7-20ENCLOSED.MATERIAL SHOULD BE FREE FROM CRACKS,FLAWS,ROLLING,LAPS ETC & SHOULD BE SUBJECTED TO 100% CRACK DETECTION BYULTRASONIC METHOD.BOTH HARDENED END OF EACH ROD SHOULD BEPARTED,SQUARED AND CHAMFERED OF 3MM X 45 DEG. CIRCULAROVALITY 0.020MM MAXIMUM.ALL RODS ARE TO BE STRAIGHT.
Drawing no.
AS PER ITEM DESCRIPTION.
Manufacturing Technology
1. Electric Arc Furnace/other suitable furnace
2. Degassing unit
3. Refining Furnace
4. Continuous casting m/c
5. De-Scaler m/c.
6. Rolling mill
7. Carbon oxygen manipulator
STEEL ROD 32 [+0.00/-0.10] mm DIA STEEL 53 x m10 TO SPECN: TY-14-1-2232-77. IN STRAIGHT LENGTH OF 2 TO 2.5 MTRS WITH CHEMICAL & PHYSICAL PROPERTIES AS PER STEEL SPEC.NO.ML:003SHT 1 OF 1 DATE 17/11/95. EACH ROD SHOULD HAVE ONE END MACHINED RIGHT ANGLE TO DIAMETER
Specification
STEEL ROD 32 [+0.00/-0.10] mm DIA STEEL 53 x m10 TO SPECN: TY-14-1-2232-77. IN STRAIGHT LENGTH OF 2 TO 2.5 MTRS WITH CHEMICAL & PHYSICAL PROPERTIES AS PER STEEL SPEC.NO.ML:003SHT 1 OF 1 DATE 17/11/95. EACH ROD SHOULD HAVE ONE END MACHINED RIGHT ANGLE TO DIAMETER
STEEL ROD 32 [+0.00/-0.10] mm DIA STEEL 53 x m10 TO SPECN: TY-14-1-2232-77. IN STRAIGHT LENGTH OF 2 TO 2.5 MTRS WITH CHEMICAL & PHYSICAL PROPERTIES AS PER STEEL SPEC.NO.ML:003SHT 1 OF 1 DATE 17/11/95. EACH ROD SHOULD HAVE ONE END MACHINED RIGHT ANGLE
ANODE CADMIUM GR 99.98% (99.95% PURITY IS ALSO ACCEPTABLE) 305 MM X 206 MM X 6 MM THICK WITH GENERAL TOLERANCE IN DIMENSI0N TO SPECN: IS-2602-1989(1st REV)(REAFFIRMED 2016).
Specification
ANODE CADMIUM GR 99.98% (99.95% PURITY IS ALSO ACCEPTABLE) 305 MM X 206 MM X 6 MM THICK WITH GENERAL TOLERANCE IN DIMENSI0N TO SPECN: IS-2602-1989(1st REV)(REAFFIRMED 2016).
Drawing no.
ANODE CADMIUM GR 99.98% (99.95% PURITY IS ALSO ACCEPTABLE) 305 MM X 206 MM X 6 MM THICK WITH GENERAL TOLERANCE IN DIMENSI0N TO SPECN: IS-2602-1989(1st REV)(REAFFIRMED 2016
BRASS STRIP 22+/-0.50 MM WIDE X 0.7 +0.02/-0.03 MM THICK IN COILS OF CONTINUOUS LENGTH WEIGHING 10 TO 15 KG AND INSIDE DIA. OF COIL 100 TO 150 MM TO SPECN BS-2870 CZ 106 1/4 HARD
Specification
BRASS STRIP 22+/-0.50 MM WIDE X 0.7 +0.02/-0.03 MM THICK IN COILS OF CONTINUOUS LENGTH WEIGHING 10 TO 15 KG AND INSIDE DIA. OF COIL 100 TO 150 MM TO SPECN BS-2870 CZ 106 1/4 HARD
Drawing no.
BRASS STRIP 22+/-0.50 MM WIDE X 0.7 +0.02/-0.03 MM THICK IN COILS OF CONTINUOUS LENGTH WEIGHING 10 TO 15 KG AND INSIDE DIA. OF COIL 100 TO 150 MM TO SPECN BS-2870 CZ 106 1/4 HARD
BRASS TUBE SIZE 13.85 +0.1 OD X 10.95 -0.05 ID X 185(-0.3)MMLONG IS-407-1981 (THIRD REV.)(REAFFIRMED 2006) GRD.CU Zn 30AS "TA" COND WITH PROP RM-300/332 MPa HARDNESS 50 TO 62 HRB.
Specification
BRASS TUBE SIZE 13.85 +0.1 OD X 10.95 -0.05 ID X 185(-0.3)MMLONG IS-407-1981 (THIRD REV.)(REAFFIRMED 2006) GRD.CU Zn 30AS "TA" COND WITH PROP RM-300/332 MPa HARDNESS 50 TO 62 HRB.
Drawing no.
BRASS TUBE SIZE 13.85 +0.1 OD X 10.95 -0.05 ID X 185(-0.3)MMLONG IS-407-1981 (THIRD REV.)(REAFFIRMED 2006) GRD.CU Zn 30AS "TA" COND WITH PROP RM-300/332 MPa HARDNESS 50 TO 62 HRB.
ALUMINIUM ALLOY SHEET SIZE 2400 MM X 1200 MM X 3 MM THICK TO SPECN:-IS-737-1986, DEGN: 24345 CONDITION WP (ROUNDED TO FULL SHEET) WITH HARDNESS MINIMUM 130 VPN
Specification
ALUMINIUM ALLOY SHEET SIZE 2400 MM X 1200 MM X 3 MM THICK TO SPECN:-IS-737-1986, DEGN: 24345 CONDITION WP (ROUNDED TO FULL SHEET) WITH HARDNESS MINIMUM 130 VPN
RAW MATERIAL OF BARREL ST. ROD 40.0 MM DIA TO SPEC. JSS:9510-06-2012 CODE REF .B. T - I COND. WITH COMPOSITION N RESTRICTION S%=0.01 MAX., P%=0.015MAX & (S+P)%=0.022MAX. ANNEXURE NO. 7158/DDO/LMG 5.56MM BARREL FOR TESTING PARA ENCLOSED., QUALITY AOD/VOD.
BLACK POWDER KZDP-2 AS PER SPECIFICATION GOST 1028-79 FOR LIGHTER ASSY.DRG.NO.4Zh63.050CB OF 125MM FSAPDS(AMK-339)ANDQAP No.F3/MANGO PROJECT/21-22 DATE 04/12/2021.
Specification
BLACK POWDER KZDP-2 AS PER SPECIFICATION GOST 1028-79 FOR LIGHTER ASSY.DRG.NO.4Zh63.050CB OF 125MM FSAPDS(AMK-339)ANDQAP No.F3/MANGO PROJECT/21-22 DATE 04/12/2021.
BLACK POWDER DRP-2 AS PER SPECIFICATION GOST 1028-79 FOR LIGHTER ASSY.DRG.NO.4Zh63.100CB OF 125MM FSAPDS(AMK-339)AND QAP No.F3/MANGO PROJECT/21-22 DATE 04/12/2021.
Specification
BLACK POWDER DRP-2 AS PER SPECIFICATION GOST 1028-79 FOR LIGHTER ASSY.DRG.NO.4Zh63.100CB OF 125MM FSAPDS(AMK-339)AND QAP No.F3/MANGO PROJECT/21-22 DATE 04/12/2021.
ZIRCONIUM METAL POWDER TYPE- A PYROTECHNICAL WITH ACTIVE ZIRCONIUM CONTENT 90.0% MIN, MEAN PARTICLE DIA 3 MICRON TO SPECN: AB BOFORS REG- 34 83:36 8/9 DT. 1/11/63, (1) APPEARANCE - GREY BLACK OR BLACK POWDER FREE OF MECHANICAL IMPURITIES (2) CONT. OF HYDROGEN: MAX 0.5% (3) MOISTURE CONTENT: MAX 0.5% (4) SPECIFIC SURFACE TO AIR PERMEABILITY METHOD ACCORDING TO FISHER SUB SIEVE MIN. 20000 SQUARE CENTIMETER/CUBIC CENTIMETER, DRY POWDER OR WETTED IN ACETONE.
Specification
ZIRCONIUM METAL POWDER TYPE- A PYROTECHNICAL WITH ACTIVE ZIRCONIUM CONTENT 90.0% MIN, MEAN PARTICLE DIA 3 MICRON TO SPECN: AB BOFORS REG- 34 83:36 8/9 DT. 1/11/63, (1) APPEARANCE - GREY BLACK OR BLACK POWDER FREE OF MECHANICAL IMPURITIES (2) CONT. OF HYDROGEN: MAX 0.5% (3) MOISTURE CONTENT: MAX 0.5% (4) SPECIFIC SURFACE TO AIR PERMEABILITY METHOD ACCORDING TO FISHER SUB SIEVE MIN. 20000 SQUARE CENTIMETER/CUBIC CENTIMETER, DRY POWDER OR WETTED IN ACETONE.
COTTON FABRIC PERCALE A-85 BROWN SHEETING WITH FINISHING OZ-OP AS PER SPECIFICATION GOST 12125-66 D=105 (PLUS/MINUS) 5 AND QAP NO. F-3/MANGO PROJECT/21-22, DT 27/11/2021.
Specification
COTTON FABRIC PERCALE A-85 BROWN SHEETING WITH FINISHING OZ-OP AS PER SPECIFICATION GOST 12125-66 D=105 (PLUS/MINUS) 5 AND QAP NO. F-3/MANGO PROJECT/21-22, DT 27/11/2021.
CAP TO DRG.NO. F1301-024351-J DC NO. 36522-A DT. 10/02/99 AND LOCK BOTTOM TO DRG.NO. F1301-029651-F DC NO. 36771-A DT. 31/07/01 SPECN: F1301-905060-P DT. 07/01/91
Specification
CAP TO DRG.NO. F1301-024351-J DC NO. 36522-A DT. 10/02/99 AND LOCK BOTTOM TO DRG.NO. F1301-029651-F DC NO. 36771-A DT. 31/07/01 SPECN: F1301-905060-P DT. 07/01/91
Drawing no.
CAP TO DRG.NO. F1301-024351-J DC NO. 36522-A DT. 10/02/99 AND LOCK BOTTOM TO DRG.NO. F1301-029651-F DC NO. 36771-A DT. 31/07/01 SPECN: F1301-905060-P DT. 07/01/91
PRIMER GASKET TO DRG NO-F1301-036530-D DC NO.36783-A DT 19/9/01 INDEGENOUS MATERIAL SPECN:-IND/ME/884:2015 COMPOUND NO: C-60 HARDNESS DEGREE BS-60(+5/-4) DC NO. 5403-ME DATE1-02-2016 COMPATIBLE WITH RDX TNT.
Specification
PRIMER GASKET TO DRG NO-F1301-036530-D DC NO.36783-A DT 19/9/01 INDEGENOUS MATERIAL SPECN:-IND/ME/884:2015 COMPOUND NO: C-60 HARDNESS DEGREE BS-60(+5/-4) DC NO. 5403-ME DATE1-02-2016 COMPATIBLE WITH RDX TNT.
CONFIGURATION OF ONE STACK:04 X ARMOUR PLATES 75 MM IN ACCORDACE WITH SPECIFICATION MIL-A-12560, CLASS 1 OR 3,HARDNESS HB 269-311, SIZE: 330X500 MM & 13 X ARMOUR PLATES,30 MM IN ACCORDACE WITH SPECIFICATION MIL-A-12560, CLASS 2,HARDNESS HB 277-321, SIZE: 330X500 MM.
Specification
CONFIGURATION OF ONE STACK:04 X ARMOUR PLATES 75 MM IN ACCORDACE WITH SPECIFICATION MIL-A-12560, CLASS 1 OR 3,HARDNESS HB 269-311, SIZE: 330X500 MM & 13 X ARMOUR PLATES,30 MM IN ACCORDACE WITH SPECIFICATION MIL-A-12560, CLASS 2,HARDNESS HB 277-321, SIZE: 330X500 MM.
NG Barrier of 125mm FSAPDS practice consist of. 1. NG barrier for 125mm FSAPDS/ Practice ammn. primary cartridge to spec./ drg. no. HEMRL/CCC/125/FS/2014-1
2. NG barrier for 125mm FSAPDS/ Practice ammn. secondary cartridge to spec./ drg. no. HEMRL/CCC/125/FS/2014-2
Specification
NG Barrier of 125mm FSAPDS practice consist of. 1. NG barrier for 125mm FSAPDS/ Practice ammn. primary cartridge to spec./ drg. no. HEMRL/CCC/125/FS/2014-1
2. NG barrier for 125mm FSAPDS/ Practice ammn. secondary cartridge to spec./ drg. no. HEMRL/CCC/125/FS/2014-2
COMBUSTIBLE COMPONENTS FOR PRIMARY AND SECONDARY 125MM FSAPDS PRACTICE (HEMRL/CCC/PS/417 AUG.2017) CONSIST OF.1.COMBUSTIBLE BODY PRIMARY -PRACTICE TO SPEC./DRG.NO. HEMRL/CCC/125-P/1 .2.COMBUSTIBLE INNER CAP PRIMARY-PRACTICE TO SPEC./DRG.NO.HEMRL/CCC/125-P/2 3.COMBUSTIBLE OUTER CAP PRIMARY-PRACTICE TO SPEC./DRG.NO. HEMRL/CCC/125-P/3 4.COMBUSTIBLE CYLINDER PRIMARY-PRACTICE TO SPEC./DRG.NO.HEMRL/CCC/125-P/4A 5.COMBUSTIBLE OUTER BODY SECONDARY-PRACTICE TO SPEC./DRG.NO HEMRL/CCC/125-P/5 6.COMBUSTIBLE INNER BODY SECONDARY-PRACTICE TO SPEC./DRG.NO HEMRL/CCC/125-P/6A 7.COMBUSTIBLE CAP SECONDARY-PRACTICE TO SPEC./DRG.NO. HEMRL/CCC/125-P/7 8.COMBUSTIBLE SLEEVE SECONDARY-PRACTICE TO SPEC./DRG.NO. HEMRL/CCC/125-P/8 A.
Specification
COMBUSTIBLE COMPONENTS FOR PRIMARY AND SECONDARY 125MM FSAPDS PRACTICE (HEMRL/CCC/PS/417 AUG.2017) CONSIST OF.1.COMBUSTIBLE BODY PRIMARY -PRACTICE TO SPEC./DRG.NO. HEMRL/CCC/125-P/1 .2.COMBUSTIBLE INNER CAP PRIMARY-PRACTICE TO SPEC./DRG.NO.HEMRL/CCC/125-P/2 3.COMBUSTIBLE OUTER CAP PRIMARY-PRACTICE TO SPEC./DRG.NO. HEMRL/CCC/125-P/3 4.COMBUSTIBLE CYLINDER PRIMARY-PRACTICE TO SPEC./DRG.NO.HEMRL/CCC/125-P/4A 5.COMBUSTIBLE OUTER BODY SECONDARY-PRACTICE TO SPEC./DRG.NO HEMRL/CCC/125-P/5 6.COMBUSTIBLE INNER BODY SECONDARY-PRACTICE TO SPEC./DRG.NO HEMRL/CCC/125-P/6A 7.COMBUSTIBLE CAP SECONDARY-PRACTICE TO SPEC./DRG.NO. HEMRL/CCC/125-P/7 8.COMBUSTIBLE SLEEVE SECONDARY-PRACTICE TO SPEC./DRG.NO. HEMRL/CCC/125-P/8 A.
FABRICATION OF NET MOSQUITO ROUND MESH POLYESTER FLAME RETARDENT KHAKI
AS PER SPECIFICATION NO. JSS 7210-29:2016, REV. NO. 1 & AS PER SAMPLE HELD WITH OCFS.
Specification
FABRICATION OF NET MOSQUITO ROUND MESH POLYESTER FLAME RETARDENT KHAKI
AS PER SPECIFICATION NO. JSS 7210-29:2016, REV. NO. 1 & AS PER SAMPLE HELD WITH OCFS.
JSS: 8315-6 Vty. 02 or IS 4228-1979 Vty. 02 Except that :- The following alternate constructional parameters are required to be followed to be achieved specified BS & Mass.
Sl. No. Parameters Alternate constructional parameters
a. Linear density of 23.3x1
Yarn. Tex 23.3x1
Warp (Tolerance: -3% to
Weft +8%)
b. Total no of ends: Any no. of ends more than 150 (preferably 170)
in full width without exceeding the specified mass i.e. 620 g/100m, max
c. Picks/dm 310+-20 (2 picks/shed). Except that Shade should as per
approved sample held with QCM/OPF
PAPER ADHESIVE STICKERS SIZE 20 X 14 CM
Detail description: -
i) Adhesion on paper board should be up to the mark & should not give way after sticking.
ii) Stickers should be printed with required information.
iii) Tolrence in the size of stickers is +- 01.00 cm.
