BOOSTER TO DRG NO: 172.40.321

GOST 4543-71

172.40.321

• AS PER VQC

• AS PER QAP

DISC RETAINER TO DRG NO: 188.28.004SB

GOST 2930-62

188.28.004SB

• AS PER VQC

• AS PER QAP

FORK TO DRG NO:188.41.007

GOST 4543-71

• 188.41.007
• AS PER VQC

• AS PER QAP

END PIECE FOR RGB 60, AS PER DRG. NO: NASK 1071/3

AS PER ENLOSED SPECIFICATION

DRG. NO: NASK 1071/3

• AS PER ENLOSED SPECIFICATION

• AS PER ENLOSED SPECIFICATION

SOCKET FOR RGB 60, AS PER DRG NO: 1068/3

as per enclosed specification

DRG NO: 1068/3

• as per enclosed specification

• as per enclosed specification

DISC MOD 1 FOR RGB 60 AS PER DRG NO: NASK 1134/1/3(P)

as per enclosed specification

• as per enclosed specification

• as per enclosed specification

BUSH FOR RGB 60, AS PER DRG. NO: NASK 1068/10

AS PER ENCLOSED SPECIFICATION

1068/10

• AS PER ENCLOSED SPECIFICATION

• AS PER ENCLOSED SPECIFICATION

BUSH FOR RGB-60 AS PER DRAWING NO NASK 1068/5

AS PER ENCLOSED SPECIFICATION

1068/5

• AS PER ENCLOSED SPECIFICATION

• AS PER ENCLOSED SPECIFICATION

NUT FOR RGB60 AS PER DRAWING NO: NASK 1068/12

As per enclosed specification

1068/12

• As per enclosed specification

• As per enclosed specification

GLAND FOR RGB 60, AS PER DRG. NO: NASK 1071/6

As per enclosed specification

1071/6

• As per enclosed specification

• As per enclosed specification

CHECK NUT FOR RGB 60, AS PER DRG. NO. NASK 1071/7

As per enclosed specification

1071/7

• As per enclosed specification

• As per enclosed specification

CORE RGB 60, AS PER DRG. NO. NASK 1068/9

AS per enclosed specification

• AS per enclosed specification

• AS per enclosed specification

det and cal plate assembly

As per specification

• As per specification

• As per specification

BODY 188.10.181/C 3801210185

188.10.181/C

188.10.181/C

• AS PER VQC

• AS PER QAP

PORT HOLE 187.10.241/C 3801210263

187.10.241/C

187.10.241/C

• AS PER VQC

• AS PER QAP

capacitor pack and TM assy

capacitor pack and TM assy

• As per Specification

• As per Specification

filter bracket assy

As per Specification

• As per Specification

• As per Specification

Rivet, Top Cover Bracket, OOW50BMG as per Drg. No. 5152980 of M2HB Gun

Rivet, Top Cover Bracket, OOW50BMG as per Drg. No. 5152980 of M2HB Gun

OOW50BMG as per Drg. No. 5152980 of M2HB Gun

• As per Drawing & QAP

• As per Drawing & QAP

Rivet, Solid, OOW50BMG as per Drg. No. 5009282 of M2HB Gun

Rivet, Solid, OOW50BMG as per Drg. No. 5009282 of M2HB Gun

OOW50BMG as per Drg. No. 5009282 of M2HB Gun

• As per Drawing & QAP

• As per Drawing & QAP

Solid Lower Trunnion Rivet, OOW50BMG as per Drg. No. 5009799 of M2HB Gun

Solid Lower Trunnion Rivet, OOW50BMG as per Drg. No. 5009799 of M2HB Gun

OOW50BMG as per Drg. No. 5009799 of M2HB Gun

• As per Drawing & QAP

• As per Drawing & QAP

Rivet, Bolt Latch Bracket, OOW50BMG as per Drg. No. 5013522 of M2HB Gun

Rivet, Bolt Latch Bracket, OOW50BMG as per Drg. No. 5013522 of M2HB Gun

OOW50BMG as per Drg. No. 5013522 of M2HB Gun

• As per Drawing & QAP

• As per Drawing & QAP

Rivet, Solid, OOW50BMG as per Drg. No. 5009292 of M2HB Gun

Rivet, Solid, OOW50BMG as per Drg. No. 5009292 of M2HB Gun

OOW50BMG as per Drg. No. 5009292 of M2HB Gun

• As per Drawing & QAP

• As per Drawing & QAP

Rivet, Main Trunnion, OOW50BMG as per Drg. No. 5013558 of M2HB Gun

Rivet, Main Trunnion, OOW50BMG as per Drg. No. 5013558 of M2HB Gun

OOW50BMG as per Drg. No. 5013558 of M2HB Gun

• As per Drawing & QAP

• As per Drawing & QAP

Rivet, Top & Bottom plate, OOW50BMG as per Drg. No. 5009387 of M2HB Gun

Rivet, Top & Bottom plate, OOW50BMG as per Drg. No. 5009387 of M2HB Gun

OOW50BMG as per Drg. No. 5009387 of M2HB Gun

• As per Drawing & QAP

• As per Drawing & QAP

Rivet, Belt Holding Pawl Bracket, OOW50BMG as per Drg. No. 7266329 of M2HB Gun

Rivet, Belt Holding Pawl Bracket, OOW50BMG as per Drg. No. 7266329 of M2HB Gun

OOW50BMG as per Drg. No. 7266329 of M2HB Gun

• As per Drawing & QAP

• As per Drawing & QAP

Pawl Assembly, Belt Holding, OOW50BMG as per Drawing No.: 7313083 of M2HB GUN

Pawl Assembly, Belt Holding, OOW50BMG as per Drawing No.: 7313083 of M2HB GUN

7313083 of M2HB GUN

• As per Drawing & QAP

• As per Drawing & QAP

ROD CLEANING SMALL ARMS DRG NO:30T 1700 021 B3 FOR 40mm MGL

AS PER DRG OF ROD CLEANING SMALL ARMS DRG NO:30T 1700 021 B3 FOR 40mm MGL

30T 1700 021 B3

• AS PER TE

• AS PER TE

7440208460 P16 KNOB POTENTIOMETER 100KOHM Drg No.PART NO.:P16NP104KAB15 P16 KNOB POTENTIOMETER 100K OH M, TOLERANCE +/-10%, 1 WATT, MAKE:VISHAY SFERNICE, PART NO. :P16NP104KAB15

7440208460 P16 KNOB POTENTIOMETER 100KOHM Drg No.PART NO.:P16NP104KAB15 P16 KNOB POTENTIOMETER 100K OH M, TOLERANCE +/-10%, 1 WATT, MAKE:VISHAY SFERNICE, PART NO. :P16NP104KAB15

7440208460 P16 KNOB POTENTIOMETER 100KOHM Drg No.PART NO.:P16NP104KAB15 P16 KNOB POTENTIOMETER 100K OH M, TOLERANCE +/-10%, 1 WATT, MAKE:VISHAY SFERNICE, PART NO. :P16NP104KAB15

• ELECTRONIC ITEM

• ELECTRONIC ITEM

Cocking mechanism Assy as per Drg No080777A 00 for stand weapon Assy of SRCG

Cocking mechanism Assy as per Drg No080777A 00 for stand weapon Assy of SRCG

• QAP
• QAP

• AS PER SPECIFICATION

SLIDE SHOE TO DRG NO 301075223 AS PER DC37448 A DATED 18032017

SLIDE SHOE TO DRG NO 301075223 AS PER DC37448 A DATED 18032017

• SLIDE SHOE TO DRG NO 301075223 AS PER DC37448 A DATED 18032017

• SLIDE SHOE TO DRG NO 301075223 AS PER DC37448 A DATED 18032017

Solenoid Shot Assy as per Drg No.Y18884A-00 for stand weapon Assy of SRCG

Solenoid Shot Assy as per Drg No.Y18884A-00 for stand weapon Assy of SRCG

Y18884A

• AS PER SPECIFICATION MONITORING INSTRUCTION

• QMI

STOPPING BRAKE HOUSING RIGHT HAND

STOPPING BRAKE HOUSING RIGHT HAND

172.40.366

• AS PER VQC ATTACHED

• AS PER VQC ATTACHED

STOPPING BRAKE HOUSING LEFT HAND

STOPPING BRAKE HOUSING LEFT HAND

172.40.367

• AS PER VQC ATTACHED

• AS PER VQC ATTACHED

ALUMINIUM ALLOY ROUND TO SPECIFICATION EN 754 2 EN AW 2011 T8 TO SIZE 25 MM DIA + - 0.05 MM IN STRAIGHT LENGTH OF 2 TO 3 METERS. MATERIAL SHALL BE FREE FROM PGG

ALUMINIUM ALLOY ROUND TO SPECIFICATION EN 754 2 EN AW 2011 T8 TO SIZE 25 MM DIA + - 0.05 MM IN STRAIGHT LENGTH OF 2 TO 3 METERS. MATERIAL SHALL BE FREE FROM PGG

0000

• AS PER ATTACHMENT
• AS PER ATTACHMENT
• AS PER ATTACHMENT
• AS PER ATTACHMENT
• AS PER ATTACHMENT

• AS PER ATTACHMENT
• AS PER ATTACHMENT

ALUMINIUM ALLOY ROUND TO SPECIFICATION EN 754 2 EN AW 2011 T8 TO SIZE 25 MM DIA + - 0.05 MM IN STRAIGHT LENGTH OF 2 TO 3 METERS. MATERIAL SHALL BE FREE FROM PGG

ALUMINIUM ALLOY ROUND TO SPECIFICATION EN 754 2 EN AW 2011 T8 TO SIZE 25 MM DIA + - 0.05 MM IN STRAIGHT LENGTH OF 2 TO 3 METERS. MATERIAL SHALL BE FREE FROM PGG

0000

• AS PER ATTACHMENT
• AS PER ATTACHMENT
• AS PER ATTACHMENT
• AS PER ATTACHMENT
• AS PER ATTACHMENT

• AS PER ATTACHMENT
• AS PER ATTACHMENT

UPPER HAND GUARD ASSY AS PER DRG NO KC3 2050 WITH FIRMS MATERIAL FOR TRICA

UPPER HAND GUARD ASSY AS PER DRG NO KC3 2050 WITH FIRMS MATERIAL FOR TRICA

• AS PER DRG NO KC3 2050

• AS PER DRG NO KC3 2050

MANUFACTURE AND SUPPLY OF DRUM BACK SIGHT AS PER DRG NO KC3 2021 FOR TRICA

MANUFACTURE AND SUPPLY OF DRUM BACK SIGHT AS PER DRG NO KC3 2021 FOR TRICA

KC3 2021

• AS PER DRG NO KC3 2021

• AS PER DRG NO KC3 2021

RUGGED 6.5" LCD DISPLAY ASSEMBLY (L. F. 7441121478), AS PER SPEC. NO. CDR TI (MK-II) T-72/EL/DISPLAY ASSY/05

RUGGED 6.5" LCD DISPLAY ASSEMBLY (L. F. 7441121478), AS PER SPEC. NO. CDR TI (MK-II) T-72/EL/DISPLAY ASSY/05

RUGGED 6.5" LCD DISPLAY ASSEMBLY (L. F. 7441121478), AS PER SPEC. NO. CDR TI (MK-II) T-72/EL/DISPLAY ASSY/05

• ELECTRONIC ITEM

• ELECTRONIC ITEM

FABRICATION OF PINION TO DRG NO. 9A-621.06.009 FROM PINION FORGING TO DRG NO F-2296

FABRICATION OF PINION TO DRG NO. 9A-621.06.009 FROM PINION FORGING TO DRG NO F-2296

• AS PER ATTACHMENT

• AS PER ATTACHMENT

Assembly Carrying Handle, OOW50BMG as per drawing no.: 10208111 of M2HB GUN

Assembly Carrying Handle, OOW50BMG as per drawing no.: 10208111 of M2HB GUN

10208111 of M2HB GUN

• Firm should have suitable infrastructure, manufacturing, inspection and testing facility to manufacture this item. Manufacturing facilities includes machines, capacity, trained manpower etc for the manufacturing of the subjected item(s). The firm should have manufacturing facilities like, CNC turning, milling and heat treatment facilities to meet the manufacturing requirements as applicable. OFT may carry out capacity verification of Bidder(s), if felt necessary.

• Testing and inspection facilities: The firm should have CMM/UMM, Height Gauge, Profile Projector to meet the dimensional inspection of components as applicable. Firm must submit documentary proof to substantiate the same.

STOP ASSEMBLY, CARTRIDGE, OOW50BMG as per drawing no.: 5577409 OF M2HB GUN

STOP ASSEMBLY, CARTRIDGE, OOW50BMG as per drawing no.: 5577409 OF M2HB GUN

5577409 OF M2HB GUN

• Firm should have suitable infrastructure, manufacturing, inspection and testing facility to manufacture this item. Manufacturing facilities includes machines, capacity, trained manpower etc for the manufacturing of the subjected item(s). The firm should have manufacturing facilities like, CNC turning, milling and heat treatment facilities to meet the manufacturing requirements as applicable. OFT may carry out capacity verification of Bidder(s), if felt necessary.

• Testing and inspection facilities: The firm should have CMM/UMM, Height Gauge, Profile Projector to meet the dimensional inspection of components as applicable. Firm must submit documentary proof to substantiate the same.

PISTON ROD TO DRG.NO.4024497.

PISTON ROD TO DRG.NO.4024497.

• As per Drg

• As per QAP

STEEL FL.50X25MM TO IS:5517-1993 GD-40 NI6CR4MO3.

STEEL FL.50X25MM TO IS:5517-1993 GD-40 NI6CR4MO3.

• Raw Material (as per specification)

• 1) Chemical & Mechanical properties as per std. given Specification. 2) Dimensional inspection for all dimension given in the drawing & other parameter which are mentioned in relevant specification.

Plunger Wheel Lock for JVPC 5 56X30 MM DRG No 0204 03 04 02 14 019 00DA MIM Route

Plunger Wheel Lock for JVPC 5 56X30 MM DRG No 0204 03 04 02 14 019 00DA MIM Route

DRG No 0204 03 04 02 14 019 00DA MIM Route

• MIM ROUTE

• 1-Chemical and mechanical properties as per std. given drawing. 2- Dimensional inspection, for all dimensions given in the drawing a other parameter which are mentioned in relevant drawing

Stopper Rear Spring Recoil for JVPC 556 MM Through MIM Route DRG No 0204 03 04 00 06 005 00DA

Stopper Rear Spring Recoil for JVPC 556 MM Through MIM Route DRG No 0204 03 04 00 06 005 00DA

DRG No 0204 03 04 00 06 005 00DA

• MIM ROUTE

• 1-Chemical and mechanical properties as per std. given drawing. 2- Dimensional inspection, for all dimensions given in the drawing a other parameter which are mentioned in relevant drawing

PRE-FRAG MODULE ASSEMBLY TO DRG.NO.ARDE 08040001040000000PB, DT.14/05/2015

PRE-FRAG MODULE ASSEMBLY TO DRG.NO.ARDE 08040001040000000PB, DT.14/05/2015

• AS PER UPLOADED FILE

• AS PER UPLOADED FILE

9069111239 COIL SOLENOID 1500 TURNS30 OHMS PLASTIC EPOXY MOULDED 39 5 MM O D DIA 24 MM LONG TO PT NO M2 5945 001642 DRG NO M2 BOF5074935

9069111239 COIL SOLENOID 1500 TURNS30 OHMS PLASTIC EPOXY MOULDED 39 5 MM O D DIA 24 MM LONG TO PT NO M2 5945 001642 DRG NO M2 BOF5074935

• coil solenoid 1500 turns 30 ohms plastic moulded

• coil solenoid 1500 turns 30 ohms plastic moulded

MAGAZINE ASSY SS FOR ASHANI MK III IN FC AS PER DRG NO CTM-192

MAGAZINE ASSY (SS) FOR ASHANI MK III IN F/C AS PER DRG NO CTM-192

• AS PER ATTACHMENT

• AS PER ATTACHMENT

HOUSING ARMATURE SOFT IRON 50 M 00/d,DIA 9MM THICK TO DRG.NO. 5047925

HOUSING ARMATURE SOFT IRON 50 M 00/d,DIA 9MM THICK TO DRG.NO. 5047925

• as per Drg

• As per QAP

Tape Nylon 25.4 mm U/D (403 KGF) 3952-N (V.No.3)

Specification No. JSS:8315-6.

• As per drawing/specification

• As per drawing/specification

TAPE NYLON TUBULAR 26+-1 MM. BS : 1850KG ORANGE

Updated specification No. ADRDE/Specn/2000/54(e) received vide ADRDE, Agra letter No.ADRDE/QMS/TG(TE)/24 dtd. 30/07/2021.

• As per specification/drawing

• As per specification/drawing

Tape Nylon 66 26mm BS 700 KG Orange

SPECN NO.ADRDE/SPECN/65(a)

• As per specification/drawing

• As per specification/drawing

FABRIC NYLON 58 GM U/D 105 CM MIN. WIDTH EXCLUDING SELVEDGE

SPECN NO. AS PER TECH. PARTICULARS (a) MASS/SQ MET : 58 GM (MAX) (b) BREAKING STRENGTH, BOTH WAYS : 60 KGF (MIN) (C) TEARING STRENGTH, BOTH WAYS : 1.7 KGF (MIN) (d) AIR POROSITY : 7-10 CU.FT/SQ.FT/SEC. (e) THICKNESS:0.11M, MAX AT A PRESSUE OF 200GM/SQCM. (f) WIDTH : 105CM MIN. WIDTH EXCLUDING SELVEDGE (g) YARN LENIER DENSITY, BOTHWAYS : 45 DENIER (Nominal) (h) TWIST OF YARN : WARP:200 TPM, WEFT: 150TPM (i) THREAD DENSITY, BOTHWAYS :48-50/CM. (j) WEAVE:2/1 TWILL NOTE -THERE SHOULD NOT BE ANY TYPE OF YARN DISTORTION/SLIPPAG

• As per specification/drawing

• As per specification/drawing

Tape Textile Nylon 44 mm Un Dyed (705 KGF) 6915-N (V. No. 6)

Specification – IS : 4228-1979

• As per Drawing/Specification

• As per Drawing/Specification

Quick Release Unit

ADRDE/1369(a) DRD/26/98 EXCEPT THAT: - Dimensions of Central Pin SN- For Read (i) Dimension: 56.5 (Sheet No. 3 of 9) – Dimension: 52.1 (ii) Dimension: 53 (Sheet No. 3 of 9) – Dimension: 48.6 (iii) Dimension: 08 (Sheet No. 3 of 9) – Dimension: 6.4

• As per drawing/specification

• As per drawing/specification

Section Multipurpose Packing Frame

SPECN – ADRDE/1.6.01.04-26

• As per Specification/drawing

• As per Specification/drawing

Rip Cord Assembly

ADRDE/1323(f)

• As per Specification/drawing

• As per Specification/drawing

Quick Release Connecting Lug (Male)

DRAWING NO.: ADRDE/797(e) SHEET NO. 8.

• As per Drawing/Specification

• As per Drawing/Specification

ALUMINIUM ALLOY ROD 75MM DIA , TO ASTM B 221M GRADE 7075-T6510, AS PER SPECIFICATION ENCLOSED.

ASTM B 221M GRADE 7075-T6510

• as per enclosed specification

• as per enclosed specification

RECOVERY OF TUNGSTEN POWDER FROM TUNGSTEN ALLOY SOLID SCRAP AND END PIECES AS PER SCOPE OF WORK ENCLOSED

as per enclosed MI

• as per enclosed MI

• as per enclosed MI

CABLE ASSY WNH3A AS PER DGR NO.Y20103A-00 FOR SRCG

CABLE ASSY WNH3A AS PER DGR NO.Y20103A-00 FOR SRCG

• AS PER DRG

• AS PER QAP

CABLE ASSY, AMMO SESNOR (VIEW) AS PER DRG NO. Y18877A-00 FOR MAGAZINE ASSY OF SRCG

CABLE ASSY, AMMO SESNOR (VIEW) AS PER DRG NO. Y18877A-00 FOR MAGAZINE ASSY OF SRCG

• AS PER DRG

• AS PER QAP

set of O ring LRF

As per specification scope of work

• set of O ring LRF

• As per specification scope of work

GUANIDINE NITRATE TO SPECN.JSS 6810-95:2018 (REV.NO 04)DC NO -6135- ME DT 10-05-2021.

GUANIDINE NITRATE TO SPECN.JSS 6810-95:2018 (REV.NO 04)DC NO -6135- ME DT 10-05-2021.

• Guanidine Nitrate is manufactured by heating Dicyandiamide confirming to IND/ME/878(Prov) with two equitant of Ammonium Nitrate confirming to IND/ME/86 degree C at 160 degree C.

• Inspecti0on facility : Guanidine Nitrate and the packages in which it is packed shall be subject to inspection by and to the approval of the Quality Assurance Officer/Quality Assurance Authority
• Testing facility/requirements : Samples taken from any portion of batch/lot/consignment of material shall confirm to the following test requirements Sl no. Characteristics Passing standard 1. Physical form Crystalline 2. Bulk Density, g/ml Min. 0.70 Max. 0.90 3. Melting point, oC Min. 210 Max. 214 4 Water soluble at 30 oC, % by mass Min. 15.10 5. Guanidine Nitrate , % by mass Min. 99 6. Ammonium Nitrate, % by mass Max. 0.48 7. Urea Nil
• 8. Residue on ignition , % by mass Max. 0.02 9. Moisture content , % by mass Max. 0.48 10. Matter insoluble in water at 20 oC, % by mass Max . 0.50 11. Malamine, % by mass Max 0.10 12. pH of water extract Min. 5 Max. 6

Sear Safety for JVPC 5 56x30MM 0204 03 04 02 14 005 00DA MIM Route

Sear Safety for JVPC 5 56x30MM 0204 03 04 02 14 005 00DA MIM Route

0204 03 04 02 14 005 00DA MIM Route

• MIM Route

• Chemical and mechanical properties as per std. given drawing.
• Dimensional inspection, for all dimensions given in the drawing a other parameter which are mentioned in relevant drawing

Trigger Rear for JVPC 5.56x30MM To Drg. No. 0204-03-04-02-14-009-00DA (MIM Route)

Trigger Rear for JVPC 5.56x30MM To Drg. No. 0204-03-04-02-14-009-00DA (MIM Route)

Drg. No. 0204-03-04-02-14-009-00DA (MIM Route)

• MIM Route

• Chemical and mechanical properties as per std. given drawing.
• Dimensional inspection, for all dimensions given in the drawing a other parameter which are mentioned in relevant drawing

Catch Magazine for JVPC 5.56x30MM 0204-03-04-02-14-014-00DA (MIM Route)

Catch Magazine for JVPC 5.56x30MM 0204-03-04-02-14-014-00DA (MIM Route)

0204-03-04-02-14-014-00DA (MIM Route)

• MIM Route

• 1-Chemical and mechanical properties as per std. given drawing. 2- Dimensional inspection, for all dimensions given in the drawing a other parameter which are mentioned in relevant drawing

ELECTROMAGNET TO DRG NO AL6650044 FOR BLOCK D (LF 7440200208)

ELECTROMAGNET TO DRG NO AL6650044 FOR BLOCK D (LF 7440200208)

ELECTROMAGNET TO DRG NO AL6650044 FOR BLOCK D LF 7440200208

• MECHANICAL COMPONENT

• MECHANICAL COMPONENT

Webbing Nylon Tubular 14 mm Undyed (BS 1100 Kg)

ADRDE/Specn/1983/11(d).

• As per Specification/Drawing

• As per Specification/Drawing

9080080878 SPRING HELICAL COMPRESSION TO DRG NO GCF-MN 5501(C ) REF.DRG NO. 5360-040480

9080080878 SPRING HELICAL COMPRESSION TO DRG NO GCF-MN 5501(C ) REF.DRG NO. 5360-040480

• As per QAP & TE documents.

• As per QAP & TE documents

9080080877 SPRING HELICAL COMPRESSION TO DRG NO GCF-MN-5502(C) (REF.DRG NO (5360-040481)

9080080877 SPRING HELICAL COMPRESSION TO DRG NO GCF-MN-5502(C) (REF.DRG NO (5360-040481)

• As per QAP

• As per QAP & TE document

RETAINER PACKING CROSS SECTIONAL TO DS CAT NO 5330-023797

RETAINER PACKING CROSS SECTIONAL TO DS CAT NO 5330-023797

• As per Drg

• AS per QAP

overhauling of firing mechanism Assy to Drg No 2A46-Cd10-20 cb with replace old contactor & electromagnet with new one (item code-9073001198)

overhauling of firing mechanism Assy to Drg No 2A46-Cd10-20 cb with replace old contactor & electromagnet with new one (item code-9073001198)

• As per Drg

• As per QAP

NICKLE AND CHROME PLATING AT 76 62 MM SRGM BARREL AND LINER AS PER ANNEXURE B AND C REFERENCE DRAWING NO SK 01265 AND SK 01264

NICKLE AND CHROME PLATING AT 76 62 MM SRGM BARREL AND LINER AS PER ANNEXURE B AND C REFERENCE DRAWING NO SK 01265 AND SK 01264

• AS PER ATTACHED DOCUMENT

• AS PER ATTACHED DOCUMENT

Sear Through MIM Route for JVPC 5.56x30 mm DRG No.0204-03-04-02-14-010-00DA.

Sear Through MIM Route for JVPC 5.56x30 mm DRG No.0204-03-04-02-14-010-00DA.

DRG No.0204-03-04-02-14-010-00DA.

• MIM ROUTE

• Chemical and mechanical properties as per std. given drawing.
• Dimensional inspection, for all dimensions given in the drawing a other parameter which are mentioned in relevant drawing.

ZINC BASE ALLOY INGOT FOR FOR DIE CASTING APP. SIZE 228.60 X 76.20 X 38.1 MM SPECN: IS 713-1981 (2nd REV) GRADE: ZN-AL-4. NOTE (1) INGOT SHALL BE MFGD. FROM VIRGIN METAL GR.ZN 99.999 OF IS:209/1992 ONLY (2)AL. PERCENTAGE SHOULD BE KEPT FROM 4.0 TO 4.3. EACH INGOT TO BE MARKED WITH CAST NUMBER . GRADE & MFGR. TRADE MARK.

ZINC BASE ALLOY INGOT FOR FOR DIE CASTING APP. SIZE 228.60 X 76.20 X 38.1 MM SPECN: IS 713-1981 (2nd REV) GRADE: ZN-AL-4. NOTE (1) INGOT SHALL BE MFGD. FROM VIRGIN METAL GR.ZN 99.999 OF IS:209/1992 ONLY (2)AL. PERCENTAGE SHOULD BE KEPT FROM 4.0 TO 4.3. EACH INGOT TO BE MARKED WITH CAST NUMBER . GRADE & MFGR. TRADE MARK.

• nil

• nil
• nil

ZINC BASE ALLOY INGOT FOR FOR DIE CASTING APP. SIZE 228.60 X 76.20 X 38.1 MM SPECN: IS 713-1981 (2nd REV) GRADE: ZN-AL-4. NOTE (1) INGOT SHALL BE MFGD. FROM VIRGIN METAL GR.ZN 99.999 OF IS:209/1992 ONLY (2)AL. PERCENTAGE SHOULD BE KEPT FROM 4.0 TO 4.3. EACH INGOT TO BE MARKED WITH CAST NUMBER . GRADE & MFGR. TRADE MARK.

ZINC BASE ALLOY INGOT FOR FOR DIE CASTING APP. SIZE 228.60 X 76.20 X 38.1 MM SPECN: IS 713-1981 (2nd REV) GRADE: ZN-AL-4. NOTE (1) INGOT SHALL BE MFGD. FROM VIRGIN METAL GR.ZN 99.999 OF IS:209/1992 ONLY (2)AL. PERCENTAGE SHOULD BE KEPT FROM 4.0 TO 4.3. EACH INGOT TO BE MARKED WITH CAST NUMBER . GRADE & MFGR. TRADE MARK.

• nil

• nil
• nil

ST.FLAT 70X34MM IN HOT ROLLED & ANNEALED CONDITION TO SPECN. BS:970:PT-3:1991.GD.410S21 OR 420S29.TEST PIECE TO BE TESTED AS PER RULINF SECTION. MATL.SHOULD SATISFY MACRO-ETCH TEST & MICROSCOPIC NON-METALIC INCLUSION RATING(II) AS PER NATURE-C A SEPARATE T.P.TO BE HARDNED TO ACHIEVE HARDNESS 265-300 BHN

ST.FLAT 70X34MM IN HOT ROLLED & ANNEALED CONDITION TO SPECN. BS:970:PT-3:1991.GD.410S21 OR 420S29.TEST PIECE TO BE TESTED AS PER RULINF SECTION. MATL.SHOULD SATISFY MACRO-ETCH TEST & MICROSCOPIC NON-METALIC INCLUSION RATING(II) AS PER NATURE-C A SEPARATE T.P.TO BE HARDNED TO ACHIEVE HARDNESS 265-300 BHN

• As per attachment

• as per attachment

STEEL FLAT 17X47MM IN HOT ROLLED AND ANNEALED AT 650'C TO SPECN.BS:970:PT-3:1991 GD.945M38 T.P.TESTED IN `T'CONDITION MACRO ETCH TEST & NMIR TEST AS PER ANNEXURE-A NATURE-C. (REQD.FOR-SHOULDER LOCKING LEFT & RIGHT DS CAT 1005-007907)

STEEL FLAT 17X47MM IN HOT ROLLED AND ANNEALED AT 650'C TO SPECN.BS:970:PT-3:1991 GD.945M38 T.P.TESTED IN `T'CONDITION MACRO ETCH TEST & NMIR TEST AS PER ANNEXURE-A NATURE-C. (REQD.FOR-SHOULDER LOCKING LEFT & RIGHT DS CAT 1005-007907)

• As per attachment

• As per attachment

ZINC BASE ALLOY INGOT FOR FOR DIE CASTING APP. SIZE 228.60 X 76.20 X 38.1 MM SPECN: IS 713-1981 (2nd REV) GRADE: ZN-AL-4. NOTE (1) INGOT SHALL BE MFGD. FROM VIRGIN METAL GR.ZN 99.999 OF IS:209/1992 ONLY (2)AL. PERCENTAGE SHOULD BE KEPT FROM 4.0 TO 4.3. EACH INGOT TO BE MARKED WITH CAST NUMBER . GRADE & MFGR. TRADE MARK.

ZINC BASE ALLOY INGOT FOR FOR DIE CASTING APP. SIZE 228.60 X 76.20 X 38.1 MM SPECN: IS 713-1981 (2nd REV) GRADE: ZN-AL-4. NOTE (1) INGOT SHALL BE MFGD. FROM VIRGIN METAL GR.ZN 99.999 OF IS:209/1992 ONLY (2)AL. PERCENTAGE SHOULD BE KEPT FROM 4.0 TO 4.3. EACH INGOT TO BE MARKED WITH CAST NUMBER . GRADE & MFGR. TRADE MARK.

• nil

• nil
• nil