ALUMINIUM PLATE 6061-T651 PER AMS QQ-A-250/11 TO SIZE 127MM THICK X 340MM WIDTH X 445MM LENGTH. IMPORTANT NOTE ASSURE THAT GRAINS ARE IN LONGITUDINAL ORIENTATION. For CRADLE MOBILE AND CRADLE BASE OF SRCG. ALL RELEVANT TEST CERTIFICATES FROM NABL LAB TO BE SUBMITTED.
Specification
ALUMINIUM PLATE 6061-T651 PER AMS QQ-A-250/11 TO SIZE 127MM THICK X 340MM WIDTH X 445MM LENGTH. IMPORTANT NOTE ASSURE THAT GRAINS ARE IN LONGITUDINAL ORIENTATION. For CRADLE MOBILE AND CRADLE BASE OF SRCG. ALL RELEVANT TEST CERTIFICATES FROM NABL LAB TO BE SUBMITTED.
ALUMINIUM ALLOY PLATE 6061- T6 OR T651 PER QQ-A-250/11 size: 60T X 100W X 410L MM. ALL RELEVANT CHEMICAL AND MECHANICAL TEST CERTIFICATE FROM NABL ACCREDITED LAB TO BE SUBMITTED.
Specification
ALUMINIUM ALLOY PLATE 6061- T6 OR T651 PER QQ-A-250/11 size: 60T X 100W X 410L MM. ALL RELEVANT CHEMICAL AND MECHANICAL TEST CERTIFICATE FROM NABL ACCREDITED LAB TO BE SUBMITTED.
ALUMINIUM PLATE 6061-T651 PER AMS QQ-A-250/11 size: 32T X 406W X 406L MM. ALL RELEVANT CHEMICAL AND MECHANICAL TEST CERTIFICATE FROM NABL ACCREDITED LAB TO BE SUBMITTED
Specification
ALUMINIUM PLATE 6061-T651 PER AMS QQ-A-250/11 size: 32T X 406W X 406L MM. ALL RELEVANT CHEMICAL AND MECHANICAL TEST CERTIFICATE FROM NABL ACCREDITED LAB TO BE SUBMITTED
SNAP FASTENER (FOUR PIECES) SPRING TYPE 7/7 WITH PLASTIC WASHER
IS:4741-1968 (AMDT. 1, REAFFIRMED 2003) EXCEPT FOR PULL STRENGTH WHICH SHOULD BE 4 KGF (MIN.), FOR PLASTIC WASHER - THICKNESS (UNDER PRESSURE 200 G/CM SQ.) 1.14 MM & DIA 12.52 MM OF BEST TRADE QUALITY
Specification
SNAP FASTENER (FOUR PIECES) SPRING TYPE 7/7 WITH PLASTIC WASHER
IS:4741-1968 (AMDT. 1, REAFFIRMED 2003) EXCEPT FOR PULL STRENGTH WHICH SHOULD BE 4 KGF (MIN.), FOR PLASTIC WASHER - THICKNESS (UNDER PRESSURE 200 G/CM SQ.) 1.14 MM & DIA 12.52 MM OF BEST TRADE QUALITY
NO.-T.S/002/BAG KIT UNIVERSAL DT. 19.12.2016 RUBBER STUD ROUND BLACK SPEC-AS PER ANNEXURE 'C' & DRAWING" OF RELEVANT SPECIFICATION OF BAG KIT UNIVERSAL MARK-II AS PER SPECIFICATION. AS PER SPECIFICATION.
Specification
NO.-T.S/002/BAG KIT UNIVERSAL DT. 19.12.2016 RUBBER STUD ROUND BLACK SPEC-AS PER ANNEXURE 'C' & DRAWING" OF RELEVANT SPECIFICATION OF BAG KIT UNIVERSAL MARK-II AS PER SPECIFICATION. AS PER SPECIFICATION
NETTING MOSQUITO ROUND MESH POLYESTER FLAME RETARDENT KHAKI ONE SET COSISTING OF :- (I) NETTING MOSQUITO R/M F/R KHAKI 124cm=6.12Mtr., (II) NETTING MOSQUITO R/M F/R KHAKI 109cm=2.02Mtr., SPECN. No. D/4211/99/TC-11(c) AND Annxure-"A" ,WIDTH OF THE MATRL.- (I) & (II) WILL BE 124cm & 109cm RESPECTIVELY HAVING BUILT IN SELVEDGE OF 20mm (min) ON BOTH SIDES . BOLT LENGTH FOR MTRL.-(I) WILL BE 24.50 Mtr. AND ABOVE IN MULTIPLE OF 6.12 Mtr. , BOLT LENGTH OF MTRL.-(II) WILL BE 24 Mtr. AND ABOVE IN MULTIPLE OF 2Mtr.
SPECN.:- D/4211/99/TC-11(C) AND ANNEXURE 'A'
Specification
NETTING MOSQUITO ROUND MESH POLYESTER FLAME RETARDENT KHAKI ONE SET COSISTING OF :- (I) NETTING MOSQUITO R/M F/R KHAKI 124cm=6.12Mtr., (II) NETTING MOSQUITO R/M F/R KHAKI 109cm=2.02Mtr., SPECN. No. D/4211/99/TC-11(c) AND Annxure-"A" ,WIDTH OF THE MATRL.- (I) & (II) WILL BE 124cm & 109cm RESPECTIVELY HAVING BUILT IN SELVEDGE OF 20mm (min) ON BOTH SIDES . BOLT LENGTH FOR MTRL.-(I) WILL BE 24.50 Mtr. AND ABOVE IN MULTIPLE OF 6.12 Mtr. , BOLT LENGTH OF MTRL.-(II) WILL BE 24 Mtr. AND ABOVE IN MULTIPLE OF 2Mtr.
SPECN.:- D/4211/99/TC-11(C) AND ANNEXURE 'A'
Frame side tray feed to DSCAT NO 1005 007400 A5107 DC NO 26983 SA for DC latest issued to be followed with firms material required for 12.7mm AD Gun LF No 7013998057
Specification
Frame side tray feed to DSCAT NO 1005 007400 A5107 DC NO 26983 SA for DC latest issue to be followed with firms material required for 12.7mm AD Gun LF No 7013998057
Arm rocking bar to DSCAT NO 1005 007323 A2524 DC NO.27086 SA for DC Latest to be followed with firms material required for 12.7mm AD Gun LF No. 7013998061
Specification
Arm rocking bar to DSCAT NO 1005 007323 A2524 DC NO.27086 SA for DC Latest to be followed with firms material required for 12.7mm AD Gun LF No. 7013998061
Base right cylinder gas to DSCAT NO 1005 007314 A2627 DC NO 26990 SA for DC Latest issued to be followed with firm's material required for 12.7mm AD Gun LF NO 7013998056
Specification
Base right cylinder gas to DSCAT NO 1005 007314 A2627 DC NO 26990 SA for DC Latest issued to be followed with firm's material required for 12.7mm AD Gun LF NO 7013998056
Base left cylinder gas to DSCAT NO 1005 007317 A2628 DC NO 27095 SA for DC Latest to be followed with firm's material required for 12.7mm AD Gun LF NO 7013998062
Specification
Base left cylinder gas to DSCAT NO 1005 007317 A2628 DC NO 27095 SA for DC Latest to be followed with firm's material required for 12.7mm AD Gun LF NO 7013998062
Pawl feed belt to DSCAT NO 3040 003453 A6026 DC NO 26991 SA for DC Latest to be followed Component to be manufactured through forging route required for 12.7mm AD Gun LF NO7013998055
Specification
Pawl feed belt to DSCAT NO 3040 003453 A6026 DC NO 26991 SA for DC Latest to be followed Component to be manufactured through forging route required for 12.7mm AD Gun LF NO7013998055
Lock plate angle lever feed TO DSCAT NO 1005 007449 A 6039 DC NO 26985 SA for DC Latest issue to be followed with firms material required for 12.7mm AD Gun LF No 7013998063
Specification
Lock plate angle lever feed TO DSCAT NO 1005 007449 A 6039 DC NO 26985 SA for DC Latest issue to be followed with firms material required for 12.7mm AD Gun LF No 7013998063
Lock plate angle lever feed TO DSCAT NO 1005 007449 A 6039 DC NO 26985 SA for DC Latest issue to be followed with firms material required for 12.7mm AD Gun LF No 7013998063
Specification
Lock plate angle lever feed TO DSCAT NO 1005 007449 A 6039 DC NO 26985 SA for DC Latest issue to be followed with firms material required for 12.7mm AD Gun LF No 7013998063
LT.NO.TS/COAT ICK(ARMY LOGO)DT.4.8.2009 ] PLASTIC ANTIQUE TIP BLACK (HIGH DENSITY POLYETHYLENE) SPECN: AS PER DRAWING NUMBER CFS/SK, DATED 30/04/2011 AND SAMPLE HELD IN CUSTODY OF OCFS
Specification
LT.NO.TS/COAT ICK(ARMY LOGO)DT.4.8.2009 ] PLASTIC ANTIQUE TIP BLACK (HIGH DENSITY POLYETHYLENE) SPECN: AS PER DRAWING NUMBER CFS/SK, DATED 30/04/2011 AND SAMPLE HELD IN CUSTODY OF OCFS
IS:1461-1984 Second Revision (Reaffirmed-2003) and Supplementary Scheduled no. CQA (GS)/SS/346(b)
Except that: (i) Material shall be polyester.
(ii) Design & Dimensions: As per Drawing Enclosed (Drg. No. OCFAV/Button/002).
(iii) In app. Feel, Finish and all other resp. not defi. in this spec. Button shall confirm to the corres. sealed sample held in the cust. of the contro. customer service centre, OCF Avadi.
1) The firm should have following manufacturing facility with them (Essential)
a) Electrical Induction Furnace
b) Facilities for testing mechanical properties
c) Heat treatment facility for sample
d) The firm should have following manufacturing facility with them
Desirable :
1) Firm should have CNC Turning Center or suitable machine/facility for parting of Driving Band Tube
2) Firm shall have well placed QMS and certification from ISO
1) The firm should have following manufacturing facility with them (Essential)
a) Electrical Induction Furnace
b) Facilities for testing mechanical properties
c) Heat treatment facility for sample
d) The firm should have following manufacturing facility with them
Desirable :
1) Firm should have CNC Turning Center or suitable machine/facility for parting of Driving Band Tube
2) Firm shall have well placed QMS and certification from ISO
COPPER TO ASTM B-152 C10200(O) PURITY 99.95% (MIN) TEMPER: SHEET SHALL BE PRODUCED BY HOT ROLLING & SUBSEQUENTLY ANNEALING (O), TENSILE ST:205 TO 260 MPA, ROCKWELL HARDNESS: 65 (MAX), SIZE:- L = 500MM, W= 172 MM OR ITS MULTIPLE WIDTH, THICKNESS 2 + 0.1 MM FOR LINER FOR RIGID CUTTING CHARGE 85 MM
Specification
COPPER TO ASTM B-152 C10200(O) PURITY 99.95% (MIN) TEMPER: SHEET SHALL BE PRODUCED BY HOT ROLLING & SUBSEQUENTLY ANNEALING (O), TENSILE ST:205 TO 260 MPA, ROCKWELL HARDNESS: 65 (MAX), SIZE:- L = 500MM, W= 172 MM OR ITS MULTIPLE WIDTH, THICKNESS 2 + 0.1 MM FOR LINER FOR RIGID CUTTING CHARGE 85 MM
COPPER TO ASTM B-152 C10200(O) PURITY 99.95% (MIN) TEMPER: SHEET SHALL BE PRODUCED BY HOT ROLLING & SUBSEQUENTLY ANNEALING (O), TENSILE ST:205 TO 260 MPA, ROCKWELL HARDNESS: 65 (MAX), SIZE:- L = 500MM, W= 189.50 MM OR ITS MULTIPLE WIDTH, THICKNESS 2 + 0.1 MM FOR LINER FOR RIGID CUTTING CHARGE 100 MM
Specification
COPPER TO ASTM B-152 C10200(O) PURITY 99.95% (MIN) TEMPER: SHEET SHALL BE PRODUCED BY HOT ROLLING & SUBSEQUENTLY ANNEALING (O), TENSILE ST:205 TO 260 MPA, ROCKWELL HARDNESS: 65 (MAX), SIZE:- L = 500MM, W= 189.50 MM OR ITS MULTIPLE WIDTH, THICKNESS 2 + 0.1 MM FOR LINER FOR RIGID CUTTING CHARGE 100 MM
FABRIC NYLON 75 GSM OG POLYURETHANE COATED 100 CM WIDE
SPECIFICATION:- APPENDIX 'A' V.NO. 2, AS MENTIONED IN SPECIFICATION NO. JSS:4240-03:2011 & AS PER ANNEXURE 'A'.
Specification
FABRIC NYLON 75 GSM OG POLYURETHANE COATED 100 CM WIDE
SPECIFICATION:- APPENDIX 'A' V.NO. 2, AS MENTIONED IN SPECIFICATION NO. JSS:4240-03:2011 & AS PER ANNEXURE 'A'.
SET OF LIGHTER AND FLASH REDUCER COVER WITH GASKET CONSISTING OF. (I) BAG OF LIGHTER LOWER AS PER DRAWING TRD-2.1.3470 & TRD-2.1.3471 QTY.1 NO. (II) BAG AS LIGHTER UPPER AS PER DRAWING TRD-2.1.3474 & TRD-2.1.3475 QTY.1 NO. (III) GASKET AS PER DRAWING TRD-2.1.3473 SHEET 1 (DIA D = 125+/-5MM) QTY 3 NOS AND SHEET 2 (DIA D = 95+/-5MM) QTY.1 NOS. (IV) BAG OF FLAS REDUCER AS PER DRAWING TRD 2.1.3472 QTY.1 NOS.
Specification
SET OF LIGHTER AND FLASH REDUCER COVER WITH GASKET CONSISTING OF. (I) BAG OF LIGHTER LOWER AS PER DRAWING TRD-2.1.3470 & TRD-2.1.3471 QTY.1 NO. (II) BAG AS LIGHTER UPPER AS PER DRAWING TRD-2.1.3474 & TRD-2.1.3475 QTY.1 NO. (III) GASKET AS PER DRAWING TRD-2.1.3473 SHEET 1 (DIA D = 125+/-5MM) QTY 3 NOS AND SHEET 2 (DIA D = 95+/-5MM) QTY.1 NOS. (IV) BAG OF FLAS REDUCER AS PER DRAWING TRD 2.1.3472 QTY.1 NOS.
HOT ROLLED AND COLD DRAWN STEEL BAR 38(+/-0.5) MM DIA.X 1800 (+50.0/-0.0) MM LENGTH AS PER SPECIFICATION : GOST:4543-71, GRADE:30XrCH2A AND MSF ANNEXURE No.MSF/P&P/014/Matl.Specn./TA PIN Dtd.17/01/15 (Enclosed)
Specification
HOT ROLLED AND COLD DRAWN STEEL BAR 38(+/-0.5) MM DIA.X 1800 (+50.0/-0.0) MM LENGTH AS PER SPECIFICATION : GOST:4543-71, GRADE:30XrCH2A AND MSF ANNEXURE No.MSF/P&P/014/Matl.Specn./TA PIN Dtd.17/01/15 (Enclosed)
1. Facility to produce fully Aluminium killed High Quality Alloy Steel through EAF-LFVD route.2 Hot Rolling Mill and Cold drawing process line of adequate capacity to manufacture cold drawn steel bar of required size.
1. NABL accredited lab with testing facilities for carrying out Mechanical, Metallurgical and Chemical composition test according to specified parameters
2. Suitable Heat treatment line to achieve mechanical properties as specified.
3. Crack detection testing facility.
4. Bend removing (straightening) machine.
"ELECTRO CHEMICAL ZINC PLATING FOLLOWED BY CHROMOTISING FOR SARATH/AK630 OF STAGE COMPONENT AS PER DRG.NO.- NCC/416
OTHER DETAILS FOR WORKS AND INSPECTION.
THE SCOPE OF WORK (ENCLOSED) SHOULD BE FOLLOWED. "
Specification
"ELECTRO CHEMICAL ZINC PLATING FOLLOWED BY CHROMOTISING FOR SARATH/AK630 OF STAGE COMPONENT AS PER DRG.NO.- NCC/416
OTHER DETAILS FOR WORKS AND INSPECTION.
THE SCOPE OF WORK (ENCLOSED) SHOULD BE FOLLOWED. "
Co-Driver Side Glass with Gun Port Hole with Rubber Beading Drg. No. ST-II/5009-67-31/B
Specification
Specification No. VFJ/AHSP/MPV/STANAG-II/03, Dtd. 27/11/2021, VFJ will transmit/ forward the soft copy (password protected pdf file) of specification to the vendors after receipt of duly sealed & signed NDA documents from the vendor for obtaining the specification.
Drawing no.
Drg. No. ST-II/5009-67-31/B, VFJ will transmit/ forward the soft copy (password protected pdf file) of Drawing to the vendors after receipt of duly sealed & signed NDA documents from the vendor for obtaining the Drawing.
Driver Side Glass with Gun Port Hole with Rubber Beading Drg. No. ST-II/5007-67-31/B
Specification
Specification No. VFJ/AHSP/MPV/STANAG-II/03, Dtd. 27/11/2021, VFJ will transmit/ forward the soft copy (password protected pdf file) of specification to the vendors after receipt of duly sealed & signed NDA documents from the vendor for obtaining the specification.
Drawing no.
Drg. No. ST-II/5007-67-31/B, VFJ will transmit/ forward the soft copy (password protected pdf file) of Drawing to the vendors after receipt of duly sealed & signed NDA documents from the vendor for obtaining the Drawing.
Windshield Glass with Rubber Beading, Drg. No. ST-II/5001-67-31/B
Specification
Specification No. VFJ/AHSP/MPV/STANAG-II/03, Dtd. 27/11/2021, VFJ will transmit/ forward the soft copy (password protected pdf file) of specification to the vendors after receipt of duly sealed & signed NDA documents from the vendor for obtaining the specification.
Drawing no.
Drg. No. ST-II/5001-67-31/B, VFJ will transmit/ forward the soft copy (password protected pdf file) of Drawing to the vendors after receipt of duly sealed & signed NDA documents from the vendor for obtaining the Drawing.
PLASTIC SLIDE FASTENER SPECIAL PURPOSE HEAVY DUTY TWO WAY CLOSED END TYPE F DOUBLE PULLER NON LOCK SLIDERS OG 61 CM
SPECIFICATION: - IS:14181-2002 (PART 1 TO 3) REAFFIRMED 2013.
Specification
PLASTIC SLIDE FASTENER SPECIAL PURPOSE HEAVY DUTY TWO WAY CLOSED END TYPE F DOUBLE PULLER NON LOCK SLIDERS OG 61 CM
SPECIFICATION: - IS:14181-2002 (PART 1 TO 3) REAFFIRMED 2013.
