MACHINING OF 250 KGS.BOMB BODY AS PER DRAWING NO.ARDE 9501-0 1.OTHER TERM & CONDITIONS AS PER ANNEXURE"A" ENCLOSED

MACHINING OF 250 KGS.BOMB BODY AS PER DRAWING NO.ARDE 9501-0 1.OTHER TERM & CONDITIONS AS PER ANNEXURE"A" ENCLOSED

• ENCLOSED

• ENCLOSED

IMPROVED SPACE HEATING DEVICE (BUKHARI) FOR COLD CONDITIONS

DIPAS/Specifications/Improved SHD (BUKHARI)/3/2017

• As per specification along with drawing attached.

• As per specification along with drawing attached.

RADIATOR WATER LH ASSY TO DRG NO. 175.31.001CB-ACB

RADIATOR WATER LH ASSY TO DRG NO. 175.31.001CB-ACB

175.31.001CB-ACB

• ATTACHED

• ATTACHED

ALUMINIUM ALLOY ROD TO SPECIFICATION EN 754-2: 2008 EN AW-2011A -T8 OR EN AW-7075-T6 TO SIZE: 25 MM DIA +/- 0.05 MM IN STRAIGHT LENGTH OF 2-3 METERS. MATERIAL SHALL BE FREE FROM PGG.

ALUMINIUM ALLOY ROD TO SPECIFICATION EN 754-2: 2008 EN AW-2011A -T8 OR EN AW-7075-T6 TO SIZE: 25 MM DIA +/- 0.05 MM IN STRAIGHT LENGTH OF 2-3 METERS. MATERIAL SHALL BE FREE FROM PGG.

• AS PER PQ

• AS PER QMI

GROUND STAINLESS STEEL ROD TO SPECIFICATION SS-EN 10088-3-1.4523 TO SIZE 10 MM +/- 0.05 MM IN STRAIGHT LENGTH OF 2-3 METRES.

GROUND STAINLESS STEEL ROD TO SPECIFICATION SS-EN 10088-3-1.4523 TO SIZE 10 MM +/- 0.05 MM IN STRAIGHT LENGTH OF 2-3 METRES.

• AS PER PQ

• AS PER QMI

BUTT GRIP ASSY TO DRG NO 13000 STAR REQUIRED FOR AMR

AS PER OFB REQUIREMENTS

• AS PER OFB REQUIREMENTS

• AS PER OFB REQUIREMENTS

Fitting of different type of metal components and leather strips in the gaiters glacier

IND/TC/4279

IND/TC/4279

• Die punch manually as well as die punch fitting Machines, eyelet , hooks, clips, rivets, and wire fittings with leather strips as per drawing and specification.

• Examiner deputed by In-house will check the above fitting, for the compliance.

MACHINING OF HOUSING DC 324 LF NO 7570132400

MACHINING OF HOUSING DC 324 LF NO 7570132400

BL8217401

• MECHANICAL COMPONENT

• MECHANICAL COMPONENT

MACHINING OF BRACKET DC 285 LF NO 7570128500

MACHINING OF BRACKET DC 285 LF NO 7570128500

BL8081041

• MECHANICAL COMPONENT

• MECHANICAL COMPONENT

MACHINING OF SLEEVE DC 277 LF NO 7570127700

MACHINING OF SLEEVE DC 277 LF NO 7570127700

BL8210544

• MECHANICAL COMPONENT

• MECHANICAL COMPONENT

TIN BRONZE INGOTS-NON MAGNETIC,IS:306-1983(FE CONTENT RESTRICTED TO 0.03% MAX.).NOTE:NON-MAGNETIC PROPERTY WILL BE CHECKED BY MAGNETIC NEEDLE AT THE DISTANCE 1.00MM FROM SUBJECT ITEM.

TIN BRONZE INGOTS-NON MAGNETIC,IS:306-1983(FE CONTENT RESTRICTED TO 0.03% MAX.).NOTE:NON-MAGNETIC PROPERTY WILL BE CHECKED BY MAGNETIC NEEDLE AT THE DISTANCE 1.00MM FROM SUBJECT ITEM.

• As per OFB Letter No.OFB/108/Online VR/QC dtd. 12.02.2019 with Annexure-A.

• As per OFB Letter No.OFB/108/Online VR/QC dtd. 12.02.2019 with Annexure-A.

BUSHING REAR CENTRIFUGAL CASTING

BUSHING REAR CENTRIFUGAL CASTING

• BUSHING REAR CENTRIFUGAL CASTING

• BUSHING REAR CENTRIFUGAL CASTING

STEM DRG TO 44P 30012 ST REQUIRED FOR AMR

AS PER OFB REQUIREMENTS

• AS PER OFB REQUIREMENTS

• AS PER OFB REQUIREMENTS

PISTON ROD TO DRG NO 44P 02012 ST 2 REQUIRED FOR AMR

AS PER OFB REQUIREMENTS

• AS PER OFB REQUIREMENTS

• AS PER OFB REQUIREMENTS

PISTON HOT TO DRG NO 44P 02010 ST REQUIRED FOR AMR

AS PER OFB REQUIREMENTS

• AS PER OFB REQUIREMENTS

• AS PER OFB REQUIREMENTS

THROTTLE TO DRG NO 44P 02008 ST REQUIRED FOR AMR

AS PER OFB REQUIREMENTS

• AS PER OFB REQUIREMENTS

• AS PER OFB REQUIREMENTS

COMPENSTATOR PISTON TO DRG NO 44P 02007 ST REQUIRED FOR AMR

AS PER OFB REQUIREMENTS

• AS PER OFB REQUIREMENTS

• AS PER OFB REQUIREMENTS

GALVANIZED STEEL WIRE 0.285 MM DIAMETER

GALVANIZED STEEL WIRE 0.285 MM DIAMETER ( AS PER ATTACHMENT)

• AS PER ATTACHMENT

• AS PER ATTACHMENT

HDPE MASTER BATCH BLACK

AS PER ATTACHMENT

• AS PER ATTACHMENT

• AS PER ATTACHMENT

TUBELESS TYRE WITH RUN FLAT SYSTEM & WHEEL RIM AS PER SPECIFICATION NO. VFJ/SP/TSS/RFS/01/MPV (ARMY & MHA) AMENDMENT NO. 13 DATED 08/01/2021

SPECIFICATION NO. VFJ/SP/TSS/RFS/01/MPV (ARMY & MHA) AMENDMENT NO. 13 DATED 08/01/2021

• AS PER SPECIFICATION
• AS PER SPECIFICATION
• AS PER SPECIFICATION
• AS PER SPECIFICATION
• AS PER SPECIFICATION

• AS PER SPECIFICATION
• AS PER SPECIFICATION
• AS PER SPECIFICATION
• AS PER SPECIFICATION
• AS PER SPECIFICATION

ELECTRIC UNIT SA DEVICE PC 751 TO OFAJ DRG NO. FS-3145

ELECTRIC UNIT SA DEVICE PC 751 TO OFAJ DRG NO. FS-3145

• AS PER PQ ATTACHED

• AS PER QMI ATTACHED

Manufacturing and supply of barrel blank after honing stage as per DRG No. TEND 2628 STAR with firms material required for 40mm MGL barrel

Manufacturing and supply of barrel blank after honing stage as per DRG No. TEND 2628 STAR with firms material required for 40mm MGL barrel

TEND 2628 *

• AS PER TE

• AS PER TE

ALUMINIUM ALLOY ROD TO SPECIFICATION EN AW-2024/AVIONAL 152/EN AW-AlCu4Mg1 TO SIZE 27MM-0.052 MM IN STRAIGHT LENGTH OF 2 TO 3 MTRS IN T351 CONDITION. MATERIAL SHALL BE FREE FROM PGG. HARDNESS OF THE MATERIAL SHALL BE 120 HB MINIMUM.

ALUMINIUM ALLOY ROD TO SPECIFICATION EN AW-2024/AVIONAL 152/EN AW-AlCu4Mg1 TO SIZE 27MM-0.052 MM IN STRAIGHT LENGTH OF 2 TO 3 MTRS IN T351 CONDITION. MATERIAL SHALL BE FREE FROM PGG. HARDNESS OF THE MATERIAL SHALL BE 120 HB MINIMUM.

• AS PER PQ ATTACHED

• AS PER QMI ATTACHED

GALVANIZED STEEL WIRE ROD IMM DIA COILS AS PER SPECN. 02 REVISION NO.2 DATED 25/06/201 (COPY ENCLOSED)

GALVANIZED STEEL WIRE ROD IMM DIA COILS AS PER SPECN. 02 REVISION NO.2 DATED 25/06/201 (COPY ENCLOSED)

• As per attachment

• As per attachment

ROD HANDLE AS PER DRAWING 33P 2021 IN FULLY FINISHED WITH FIRMS MATERIAL

ROD HANDLE AS PER DRAWING 33P 2021 IN FULLY FINISHED WITH FIRMS MATERIAL

33P2021

• AS PER TE

• AS PER TE

CASE & LINK EJECTION CHUTE AK-630 ASSY.109

CASE & LINK EJECTION CHUTE AK-630 ASSY.109

• AS PER ATTACHMENT

• AS PER ATTACHMENT

KNOB 751+441 ASSY AS PER DRG.NO.:MCT-3478

KNOB 751+441 ASSY AS PER DRG.NO.:MCT-3478

MCT-3478

• Sl. No. 61 of Annexure-A to OFB Letter No. OFB/108/Online VR/QC dated 22/02/2019 (Annexure-A Attached)

• Sl. No. 61 of Annexure-A to OFB Letter No. OFB/108/Online VR/QC dated 22/02/2019 (Annexure-A Attached)

KNOB 502 + 441 ASSY AS PER DRG.NO.: MCT-3487

KNOB 502 + 441 ASSY AS PER DRG.NO.: MCT-3487

MCT-3487

• Sl. No. 61 of Annexure-A to OFB Letter No. OFB/108/Online VR/QC dated 22/02/2019 (Annexure-A Attached)

• Sl. No. 61 of Annexure-A to OFB Letter No. OFB/108/Online VR/QC dated 22/02/2019 (Annexure-A Attached)

ROTATING SEARCH LIGHT AS PER ENCLOSURE

ROTATING SEARCH LIGHT AS PER ENCLOSURE

• AS PER ENCLOSURE

• AS PER ENCLOSURE

BRASS ROD TO SPECIFICATION IS 4170 GRADE CUZN40 IN AS MANUFACTURED CONDITION TO SIZE 3MM DIA +/-0.05MM IN STRAIGHT LENGTH OF 2 TO 3 METERS

BRASS ROD TO SPECIFICATION IS 4170 GRADE CUZN40 IN AS MANUFACTURED CONDITION TO SIZE 3MM DIA +/-0.05MM IN STRAIGHT LENGTH OF 2 TO 3 METERS

• AS PER ATTACHMENT

• AS PER ATTACHMENT

CYLINDER TO DRG NO 44P 02001 STAR REQUIRED FOR 14.5/20 MM AMR

AS PER OFT REQUIREMENTS

• AS PER OFT REQUIREMENTS

• AS PER OFT REQUIREMENTS

ITO COATED WINDOW 901 042 000 002

ITO COATED WINDOW 901 042 000 002

DRAWING NO 901 042 000 002

• ITO COATED WINDOW 901 042 000 002

• ITO COATED WINDOW 901 042 000 002

SET OF COMPONENT CCD DAY CAM SET OF MECHANICAL HOUSING ASSEMBLY CCD DAY CAMERA REF ASSY PLAN DRG NO 901 140 DETAILS AS PER ANNEXURE A

SET OF COMPONENT CCD DAY CAM SET OF MECHANICAL HOUSING ASSEMBLY CCD DAY CAMERA REF ASSY PLAN DRG NO 901 140 DETAILS AS PER ANNEXURE A

• ASSY PLAN DRG NO 901 140

• SET OF COMPONENT CCD DAY CAM SET OF MECHANICAL HOUSING ASSEMBLY CCD DAY CAMERA REF ASSY PLAN DRG NO 901 140 DETAILS AS PER ANNEXURE A

SET OF COMPONENTS CAMERAS PAINT CAMERAS ASSY REF ASSY PLAN DRG NO Y25652A00 SHEET 08 OF 39 TO 16 OF 39 DETAILS AS PER ANNEXURE C

SET OF COMPONENTS CAMERAS PAINT CAMERAS ASSY REF ASSY PLAN DRG NO Y25652A00 SHEET 08 OF 39 TO 16 OF 39 DETAILS AS PER ANNEXURE C

DRG NO Y25652A00 SHEET 08 OF 39 TO 16 OF 39 DETAILS AS PER ANNEXURE C

• AS PER ANNEXURE
• AS PER ANNEXURE

• AS PER ANNEXURE

TRANSFER BAR FOR REVOLVER 0.32 SIDE SWING DRG. NO. RV-07/12 SW.

TRANSFER BAR FOR REVOLVER 0.32 SIDE SWING DRG. NO. RV-07/12 SW.

DRG. NO. RV-07/12 SW.

• MIM

• All component's passed report provided by firm, as dimensional reports & chemical composition report by NABL certified Lab. ( Except this Load test report also to be passed in case of springs) and components also to be checked (dimensional, chemical, load reports) in Factory on sample basic, clearance should be given after passing of components.

CONTACT SPRING TO OFAJ DRG. NO. FS - 3140

CONTACT SPRING TO OFAJ DRG. NO. FS - 3140

• AS PER PQ ATTACHED

• AS PER QMI ATTACHED

Aluminium Alloy Flat 35mm x 85mm, IS-733, 24345 WP

Aluminium Alloy Flat 35mm x 85mm, IS-733, 24345 WP

• AS PER ATTACHED DOCUMENT.

• AS PER ATTACHED DOCUMENT.

Non Magnetic Brass Strip 1.82 mm thick x 35 mm wide (1-3/8")

Non Magnetic Brass Strip 1.82 mm thick x 35 mm wide (1-3/8")

• As per attached document.

• As per attached document.

FRONT FRAME BLANK TO DRG TEND 2630 REQ FOR MGL

FRONT FRAME BLANK TO DRG TEND 2630 REQ FOR MGL

TEND 2630

• FIRMS MANUFACTURING TECHNOLOGY TO PRODUCE THE COMPONENT AS PER OFT DRAWING AND QUALITY MONITORING FOR INSPECTION
• PROCESS AND QUALITY PLAN OF THE FIRM TO PRODUCE THE COMPONENT AS PER OFT DRAWING AND QUALITY MONITORING FOR INSPECTION

• FIRMS INSPECTION FACILITY TO PRODUCE THE COMPONENT AS PER OFT DRAWING AND QUALITY MONITORING FOR INSPECTION
• MECHANICAL INCLUDING IMPACT TEST AND CHEMICAL REPORT FROM NABL CERTIFIED LAB FOR RAW MATERIAL

ROD HANDLE TO DRG. NO. 30P 2021 WITH FIRM'S MATERIAL IN FULLY FINISHED REQUIRED FOR 40MM MGL

ROD HANDLE TO DRG. NO. 30P 2021 WITH FIRM'S MATERIAL IN FULLY FINISHED REQUIRED FOR 40MM MGL

• AS PER TE

• AS PER TE

MACHINED CASTING AS PER BEARING HOUSING GCF DRG NO GCF 50 40889

MACHINED CASTING AS PER BEARING HOUSING GCF DRG NO GCF 50 40889

• MACHINED CASTING AS PER BEARING HOUSING GCF DRG NO GCF 50 40889

• MACHINED CASTING AS PER BEARING HOUSING GCF DRG NO GCF 50 40889

MACHINED CASTING AS PER BEARING HOUSING GCF DRG NO GCF 50 40892

MACHINED CASTING AS PER BEARING HOUSING GCF DRG NO GCF 50 40892

• MACHINED CASTING AS PER BEARING HOUSING GCF DRG NO GCF 50 40892

• MACHINED CASTING AS PER BEARING HOUSING GCF DRG NO GCF 50 40892

MACHINED CASTING AS PER BEARING HOUSING GCF DRG NO GCF 50 40864

MACHINED CASTING AS PER BEARING HOUSING GCF DRG NO GCF 50 40864

• MACHINED CASTING AS PER BEARING HOUSING GCF DRG NO GCF 50 40864

• MACHINED CASTING AS PER BEARING HOUSING GCF DRG NO GCF 50 40864

MACHINED CASTING AS PER BEARING HOUSING GCF DRG NO GCF 50 40863

MACHINED CASTING AS PER BEARING HOUSING GCF DRG NO GCF 50 40863

• MACHINED CASTING AS PER BEARING HOUSING GCF DRG NO GCF 50 40863

• MACHINED CASTING AS PER BEARING HOUSING GCF DRG NO GCF 50 40863

MACHINED CASTING AS PER BEARING HOUSING GCF DRG NO GCF 50 40862

MACHINED CASTING AS PER BEARING HOUSING GCF DRG NO GCF 50 40862

• MACHINED CASTING AS PER BEARING HOUSING GCF DRG NO GCF 50 40862

• MACHINED CASTING AS PER BEARING HOUSING GCF DRG NO GCF 50 40862

MACHINED CASTING AS PER GCF DRG NO GCF 50 40891

MACHINED CASTING AS PER GCF DRG NO GCF 50 40891

• MACHINED CASTING AS PER GCF DRG NO GCF 50 40891

• MACHINED CASTING AS PER GCF DRG NO GCF 50 40891

MANUFACTURE AND SUPPLY OF INPUT BLANK AS PER DRG. NO. TEND 2658 FOR MSL LAUNCHER (BEFORE HARD ANODIZING STAGE) WITH FIRM'S MATERIAL

MANUFACTURE AND SUPPLY OF INPUT BLANK AS PER DRG. NO. TEND 2658 FOR MSL LAUNCHER (BEFORE HARD ANODIZING STAGE) WITH FIRM'S MATERIAL

TEND 2658

• AS PER TE

• AS PER TE

MANUFACTURE AND SUPPLY OF INPUT BLANK AS PER DRG. NO. TEND 2661 FOR MSL HOUSING LAUNCHER (BEFORE HARD ANODIZING STAGE) WITH FIRM'S MATERIAL

MANUFACTURE AND SUPPLY OF INPUT BLANK AS PER DRG. NO. TEND 2661 FOR MSL HOUSING LAUNCHER (BEFORE HARD ANODIZING STAGE) WITH FIRM'S MATERIAL

TEND 2661

• AS PER TE

• AS PER TE

CASE, SPIKE, COMMON, BEACON, 1A AS PER DRG.NO. CII-400/SA-2

CASE, SPIKE, COMMON, BEACON, 1A AS PER DRG.NO. CII-400/SA-2

• As per drawing

• As per drawing

SPIKE COMMON BEACON CASED DRG.NO. CII-400

SPIKE COMMON BEACON CASED DRG.NO. CII-400

• As per drawing.

• As per drawing

MOUNTING OF ELECTRICAL COMPONENTS OF CLM TO DRG NO. 172.74.034CB-3

MOUNTING OF ELECTRICAL COMPONENTS OF CLM TO DRG NO. 172.74.034CB-3

172.74.034CB-3

• ATTACHED

• ATTACHED

FABRICATION OF PONCHO GLACIER SPECIFICATION:- FABRICATION (200008-TAILOR SKILLED HAND-I, 200002-TAILOR SKILLED MACHINE-I, 200001-TAILOR SKILLED MACHINE-II, 200015-SERGING & 200018-SNAP FASTENING) OF PONCHO GLACIER AS PER SPECIFICATION.-IND/TC/4674(b) WITH AMENDMENT NO.-3.

FABRICATION OF PONCHO GLACIER SPECIFICATION:- FABRICATION (200008-TAILOR SKILLED HAND-I, 200002-TAILOR SKILLED MACHINE-I, 200001-TAILOR SKILLED MACHINE-II, 200015-SERGING & 200018-SNAP FASTENING) OF PONCHO GLACIER AS PER SPECIFICATION.-IND/TC/4674(b) WITH AMENDMENT NO.-3.

• as per attached manufacturing technology files

• as per attached testing/inspection facility files

Fabrication of Coat Combat Disruptive Detachable Lining with Indian Army Logo S/2594/CCD Army Logo/TC-15 & Approved sample

Fabrication of Coat Combat Disruptive Detachable Lining with Indian Army Logo S/2594/CCD Army Logo/TC-15 & Approved sample

• as per attached Manufacturing Technology Files

• as per attached Testing / Inspection Facility Files

Thermal Bonded Batting Polyester 100 GSM 150cm width Specification:- THERMAL BONDED BATTING POLYESTER 100 gsm 150 WD, AS PER APPENDIX 'B' OF PROV. SPECIFICATION NO. IND/TC/4587(d) OR AS PER APPENDIX 'C' OF PROV SPECIFICATION NO. IND/TC/4180(B) AS PER RELEVANT CLAUSE OF SPECIFICATION. AS PER CQA(T&C) KANPUR QAI NO. CQA/T&C/QAI/99 TC-11

Thermal Bonded Batting Polyester 100 GSM 150cm width Specification:- THERMAL BONDED BATTING POLYESTER 100 gsm 150 WD, AS PER APPENDIX 'B' OF PROV. SPECIFICATION NO. IND/TC/4587(d) OR AS PER APPENDIX 'C' OF PROV SPECIFICATION NO. IND/TC/4180(B) AS PER RELEVANT CLAUSE OF SPECIFICATION. AS PER CQA(T&C) KANPUR QAI NO. CQA/T&C/QAI/99 TC-11

• AS PER ATTACHED MANUFACTURING TECHNOLOGY FILES

• AS PER ATTACHED TESTING/INSPECTION FACILITY FILES

ASSEMBLED PCB OF GLASS TEMPERATURE REGULATOR PTC-27-6 WITH ALL RUSSIAN COMPONENTS OF TNPO-160, TO DRG.NO. MCT-3472 AND SCHEMATIC CIRCUIT DIAGRAM AS PER DRG. NO. AU5-088.003 33, REST TECHNICAL REQUIREMENTS / SPECIFICATIONS AS PER ENCLOSED ANNEXURE-A

ASSEMBLED PCB OF GLASS TEMPERATURE REGULATOR PTC-27-6 WITH ALL RUSSIAN COMPONENTS OF TNPO-160, TO DRG.NO. MCT-3472 AND SCHEMATIC CIRCUIT DIAGRAM AS PER DRG. NO. AU5-088.003 33, REST TECHNICAL REQUIREMENTS / SPECIFICATIONS AS PER ENCLOSED ANNEXURE-A

DRG.NO. MCT-3472 AND SCHEMATIC CIRCUIT DIAGRAM AS PER DRG. NO. AU5-088.003 33

• NA

• NA

SIDE FOLDABLE BUTT ASSY AS PER DRG NO K 4110 STAR 5 WITH FIRMS MATERIAL REQUIRED FOR TAR

SIDE FOLDABLE BUTT ASSY AS PER DRG NO K 4110 STAR 5 WITH FIRMS MATERIAL REQUIRED FOR TAR

K-4110*5

• AS PER DRAWING
• MACHINING
• FABRICATION

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

BULLET GUIDE AS PER DRG NO TEND 2570 STAR WITHOUT HEAT TREATMENT AND PHOSPHATING FOR TRICHY ASSAULT RIFLE

BULLET GUIDE AS PER DRG NO TEND 2570 STAR WITHOUT HEAT TREATMENT AND PHOSPHATING FOR TRICHY ASSAULT RIFLE

TEND-2570*

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

BAYONET AS PER DRG NO K 9030 STAR WITH FIRMS MATERIAL FOR TAR

BAYONET AS PER DRG NO K 9030 STAR WITH FIRMS MATERIAL FOR TAR

K-9030*

• AS PER DRAWING ATTACHED

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

SUPPLY OF AUTO SEAR AS DRG NO K 2067 STAR 5 WITH FIRMS MATERIAL

SUPPLY OF AUTO SEAR AS DRG NO K 2067 STAR 5 WITH FIRMS MATERIAL

K-2067*5

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

SELECTOR LEVER AS PER DRG NO TEND 2573 STAR 3 WITHOUT HEAT TREATMENT AND PHOSPHATING FOR TRICHY ASSAULT RIFLE

SELECTOR LEVER AS PER DRG NO TEND 2573 STAR 3 WITHOUT HEAT TREATMENT AND PHOSPHATING FOR TRICHY ASSAULT RIFLE

TEND-2573*3

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

SUPPLY OF LOWER HAND GUARD BAND AS PER DRG NO K 1204 STAR WITH FIRMS MATERIAL

K-1204*

K-1204*

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

SUPPLY OF GAS PORT BLOCK AS PER DRG NO K 1205 STAR 3 WITH FIRMS MATERIAL

SUPPLY OF GAS PORT BLOCK AS PER DRG NO K 1205 STAR 3 WITH FIRMS MATERIAL

K-1205 STAR3

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

THREAD COTTON WAXED WHITE 200 METERS EACH REEL

THREAD COTTON WAXED WHITE 200 METERS EACH REEL

• as per item specification

• as per item specification

CASE CARRYING AS PER DRG.NO.CWC-258/42 FOR AMR SIGHT, M-1

CASE CARRYING AS PER DRG.NO.CWC-258/42 FOR AMR SIGHT, M-1

• As per drawing & item specification

• As per drawing & item specification

ST ROD GR 53 X M 10 TO SPECN. TY 14-1-2232-77 IN HOT ROLLED, ANNEALED & PELLED CONDN. WITH SKIN HARDNESS=217 BHN MAX. NOTE:TE ST. SPECIMEN LONGITUDINAL IN HARDENED & TEMPERED CONDN. 1) UTS=100 KGF/MM SQ. (MIN) 2) RELATIVE REDUCTION IN AREA=35% (MIN). 3) IMPACT STRENGTH = 5 KGF/CM SQ. (MIN) SIZE :DIA 32 + .000/-0.10 MM

ST ROD GR 53 X M 10 TO SPECN. TY 14-1-2232-77 IN HOT ROLLED, ANNEALED & PELLED CONDN. WITH SKIN HARDNESS=217 BHN MAX. NOTE:TE ST. SPECIMEN LONGITUDINAL IN HARDENED & TEMPERED CONDN. 1) UTS=100 KGF/MM SQ. (MIN) 2) RELATIVE REDUCTION IN AREA=35% (MIN). 3) IMPACT STRENGTH = 5 KGF/CM SQ. (MIN) SIZE :DIA 32 + .000/-0.10 MM

• AS PER PQ ATTACHED

• AS PER QMI ATTACHED

GLASS FIBRE FILLED PHENOLIC MOULDING MATERIAL TO SPECN. IND/ME/951(PROV)GRADE "A" DC 3774-ME DT.28.07.2003.

GLASS FIBRE FILLED PHENOLIC MOULDING MATERIAL TO SPECN. IND/ME/951(PROV)GRADE "A" DC 3774-ME DT.28.07.2003.

• AS PER PQ ATTACHED

• AS PER QMI ATTACHED

STRAP CAT PART NO 14 5420 000222 ITEM NO 2 OF DRG NO 14 243 AND MATERIAL AS PER SPECIFICATION NO IND ENG PROV 1244

STRAP CAT PART NO 14 5420 000222 ITEM NO 2 OF DRG NO 14 243 AND MATERIAL AS PER SPECIFICATION NO IND ENG PROV 1244

• Details as per Drawing and PQ Criteria

• Details as per Drawing and PQ Criteria

Saddle Strap Trimming Cat Part No 14 5420 000069 Drg No 14 242

Saddle Strap Trimming Cat Part No 14 5420 000069 Drg No 14 242

• Details as per Drawing and PQ Criteria

• Details as per Drawing and PQ Criteria

STRAP SADDLE ASSY NYLON COMPLETE Cat Part No 14 5420 000151 to Drg No 14 243

STRAP SADDLE ASSY NYLON COMPLETE Cat Part No 14 5420 000151 to Drg No 14 243

• Details as per Drawing and PQ Criteria

• Details as per Drawing and PQ Criteria

Hose Dunlop Std Dual Purpose Green Heliflex 25mm ID x 10 m Long Item No 1 of Hose Complete With Connector End Drg No EGA 161 A

Hose Dunlop Std Dual Purpose Green Heliflex 25mm ID x 10 m Long Item No 1 of Hose Complete With Connector End Drg No EGA 161 A

• Details as per Drawing and PQ Criteria

• Details as per Drawing and PQ Criteria

HOSE complete with connectors end 1A to CAT SECTION and CAT PART No 14 5420 000217 and Drg CAT No EGA 161 A and details

HOSE complete with connectors end 1A to CAT SECTION and CAT PART No 14 5420 000217 and Drg CAT No EGA 161 A and details

• Details as per Drawing & PQ Criteria

• Details as per Drawing & PQ Criteria

SLINGS ROPE SWR 18 mm dia x 5 M Long to CAT SECTION and CAT PART No E3 3940 000262

SLINGS ROPE SWR 18 mm dia x 5 M Long to CAT SECTION and CAT PART No E3 3940 000262

• Details as per Drawing and PQ Criteria

• Details as per Drawing and PQ Criteria

SLINGS ROPE SWR 18 mm dia x 3 point 7 M Long to CAT SECTION and CAT PART No E3 3940 000234

SLINGS ROPE SWR 18 mm dia x 3 point 7 M Long to CAT SECTION and CAT PART No E3 3940 000234

• Details as per Drawing and PQ Criteria

• Details as per Drawing and PQ Criteria

ANCHOR earth holdfast to CAT SECTION AND CAT PART No LV6 MT 1 30166 to Drg No CIA B 185 1 3

ANCHOR earth holdfast to CAT SECTION AND CAT PART No LV6 MT 1 30166 to Drg No CIA B 185 1 3

• Details as per Drawing and PQ Criteria

• Details as per Drawing and PQ Criteria

Air piping modular hose loose kit for MPV consisting of 34(28+06) types of pipe as per Drawing No. MPV/BRAKE/034 (MHA Version) and drawing No. AHSP/TSS/MPV/002

Air piping modular hose loose kit for MPV consisting of 34(28+06) types of pipe as per Drawing No. MPV/BRAKE/034 (MHA Version) and drawing No. AHSP/TSS/MPV/002

Drawing No. MPV/BRAKE/034 (MHA Version) and drawing No. AHSP/TSS/MPV/002

• As per specification and drawing

• As per specification and drawing

Trade assistance for laser cutting of 6MM armour plate at firm details as per annexure- ‘A’.

Trade assistance for laser cutting of 6MM armour plate at firm details as per annexure- ‘A’.

• As per specification

• As per specification

Trade assistance for laser cutting of 4MM armour plate at firm details as per annexure- ‘A’.

Trade assistance for laser cutting of 4MM armour plate at firm details as per annexure- ‘A’.

• As per specification

• As per specification

HARDENER HY 880 OR HV 953 IN FOR USE WITH ARALDITE EPOXY RESIN ADHESIVE

HARDENER HY 880 OR HV 953 IN FOR USE WITH ARALDITE EPOXY RESIN ADHESIVE

• Details as per the attached QMI

• Details as per the attached QMI

ARALDITE PY 880 OR AW 106 STANDARD EPOXY RESIN ADHESIVE

ARALDITE PY 880 OR AW 106 STANDARD EPOXY RESIN ADHESIVE

• Details as per the attached QMI

• Details as per the attached QMI

WOODEN STIDE CAT PART No 14 5420 000093 To Drg No ISK 0324

WOODEN STIDE CAT PART No 14 5420 000093 To Drg No ISK 0324

• Details as per Drawing & PQ Criteria

• Details as per Drawing & PQ Criteria