MANUFACTURE AND SUPPLY OF MGL BUSH EXTRACTOR BEFORE ANODIC COATING TO DRG NO TEND 2261 ST WITH FIRMS MATERIAL

MANUFACTURE AND SUPPLY OF MGL BUSH EXTRACTOR BEFORE ANODIC COATING TO DRG NO TEND 2261 ST WITH FIRMS MATERIAL

TEND 2261 STAR

• AS PER OFT REQUIREMENT

• AS PER OFT REQUIREMENT

Accessories in Container Assembly SK 6601 TE

Accessories in Container Assembly SK 6601 TE

SK- 6601/TE

• FOR SK-6603/TE & SK-6604/TE- Metal forming, For SK-6605/TE- Four sided swaging For SK-6606/TE-Twisting For SK-6607/TE, SK-6608/TE, SK-6609/TE and SK-6610/TE- Machining

• 1-Chemical and mechanical properties as per std. given drawing.
• 2- Dimensional inspection, for all dimensions given in the drawing a other parameter which are mentioned in relevant drawing

Automotive Components for MPV 4X4 MK-V as per Annexure-A

Annexure-A

• As per Annexure-A

• As per Annexure-A

DESIGN , DEVLOPEMENT AND SUPPLY OF TWO SETS OF 40MM AD GUN SUSPENSION SYSTEM AS PER THE SCOPE OF WORK ATTACHED

DESIGN , DEVLOPEMENT AND SUPPLY OF TWO SETS OF 40MM AD GUN SUSPENSION SYSTEM AS PER THE SCOPE OF WORK ATTACHED

DESIGN , DEVLOPEMENT AND SUPPLY OF TWO SETS OF 40MM AD GUN SUSPENSION SYSTEM AS PER THE SCOPE OF WORK ATTACHED

• DESIGN , DEVLOPEMENT AND SUPPLY OF TWO SETS OF 40MM AD GUN SUSPENSION SYSTEM AS PER THE SCOPE OF WORK ATTACHED

• DESIGN , DEVLOPEMENT AND SUPPLY OF TWO SETS OF 40MM AD GUN SUSPENSION SYSTEM AS PER THE SCOPE OF WORK ATTACHED

LF 7441125588 PCB As Per Drg. 1368824100

LF 7441125588 PCB As Per Drg. 1368824100

LF 7441125588 PCB As Per Drg. 1368824100

• Manufacturing Technology

• Testing / Inspection Facility

LF 7441125587 PCB As Per Drg 1368824800

LF 7441125587 PCB As Per Drg 1368824800

LF 7441125587 PCB As Per Drg 1368824800

• Manufacturing Technology

• Testing / Inspection Facility

LF 7441125586 PCB As Per Drg. 1368823600

LF 7441125586 PCB As Per Drg. 1368823600

LF 7441125586 PCB As Per Drg. 1368823600

• Manufacturing Technology

• Testing / Inspection Facility

LF 7441125585 PCB As Per Drg. 1368822700

LF 7441125585 PCB As Per Drg. 1368822700

LF 7441125585 PCB As Per Drg. 1368822700

• Manufacturing Technology

• Testing / Inspection Facility

LF 7441125584 PCB As Per Drg. 1368821200

LF 7441125584 PCB As Per Drg. 1368821200

LF 7441125584 PCB As Per Drg. 1368821200

• Manufacturing Technology

• Testing / Inspection Facility

LF 7441125583 PCB As Per Drg. 1368820400

LF 7441125583 PCB As Per Drg. 1368820400

LF 7441125583 PCB As Per Drg. 1368820400

• Manufacturing Technology

• Testing / Inspection Facility

LF 7441125582 Pcb As Per Drg1368503900

LF 7441125582 Pcb As Per Drg1368503900

LF 7441125582 Pcb As Per Drg1368503900

• Manufacturing Technology

• Testing Inspection Facility

LF 7441125581 PCB As Per Drg. 1368503600

LF 7441125581 PCB As Per Drg. 1368503600

LF 7441125581 PCB As Per Drg. 1368503600

• Manufacturing Technology

• Testing / Inspection Facility

LF 7441125580 PCB As Per Drg. 1368489400

LF 7441125580 PCB As Per Drg. 1368489400

LF 7441125580 PCB As Per Drg. 1368489400

• Manufacturing Technology

• Testing / Inspection Facility

LF 7441125579 PCB As Per Drg 1368489200

LF 7441125579 PCB As Per Drg 1368489200

LF 7441125579 PCB As Per Drg 1368489200

• Manufacturing Technology

• Testing / Inspection Facility

LF-7441125578 PCB As Per Drg. 1368480400

LF-7441125578 PCB As Per Drg. 1368480400

LF-7441125578 PCB As Per Drg. 1368480400

• Manufacturing Technology

• Testing / Inspection Facility

LF-7440206167 Reflector As Per Drg. IUMK203.625. 002

LF-7440206167 Reflector As Per Drg. IUMK203.625. 002

LF-7440206167 Reflector As Per Drg. IUMK203.625. 002

• Manufacturing Technology

• Testing / Inspection Facility

LF-7440208484, PANEL(OCCULAR) As Per Drg. AL6.122. 940

LF-7440208484, PANEL(OCCULAR) As Per Drg. AL6.122. 940

LF-7440208484, PANEL(OCCULAR) As Per Drg. AL6.122. 940

• Manufacturing Technology

• Testing / Inspection Facility

LF-7440208475 BOARD As Per Drg. IUMK. 687242.004

LF-7440208475 BOARD As Per Drg. IUMK. 687242.004

LF-7440208475 BOARD As Per Drg. IUMK. 687242.004

• Manufacturing Technology

• Testing / Inspection Facility

LF-7440208476 EXCEEDING MECHANISM As Per Drg. AL6.060. 022

LF-7440208476 EXCEEDING MECHANISM As Per Drg. AL6.060. 022

LF-7440208476 EXCEEDING MECHANISM As Per Drg. AL6.060. 022

• Manufacturing Technology

• Testing Inspection Facility

LF-7440208472 SCREW DOWN MECHANISM As Per Drg. AL5.139. 126

LF-7440208472 SCREW DOWN MECHANISM As Per Drg. AL5.139. 126

LF-7440208472 SCREW DOWN MECHANISM As Per Drg. AL5.139. 126

• Manufacturing Technology

• Testing Inspection facility

BLOCK GAS IN FINISH CONDITION AS PER D.S.CAT NO;1005-006815 FOR MAG 7.62MM (BORE SIZE DIA 23.021 TO 23.037MM)

BLOCK GAS IN FINISH CONDITION AS PER D.S.CAT NO;1005-006815 FOR MAG 7.62MM (BORE SIZE DIA 23.021 TO 23.037MM)

D.S.CAT NO;1005-006815

• Machining

• 1) Chemical & Mechanical properties as per std. given drawing. 2) Dimensional inspection, for all dimensions given in the drawings & other parameter which are mentioned in relevant drawings.

FEED TRAY INTEGRATED AS PER DRG.NO. 1804 01 05 00 00 001 00DA REQUIRED FOR LMG 7.62MM X 51MM BELT FED

FEED TRAY INTEGRATED AS PER DRG.NO. 1804 01 05 00 00 001 00DA REQUIRED FOR LMG 7.62MM X 51MM BELT FED

1804 01 05 00 00 001 00DA

• Machining

• 1) Chemical & Mechanical properties as per std. given drawing. 2) Dimensional inspection, for all dimensions given in the drawing & other parameter which are mentioned in relevant drawings.

HAND GUARD RIGHT & LEFT AS PER DRG.NO. 1804 01 01 00 00 001 00DA & 1804 01 01 00 00 002 00DA REQUIRED FOR LMG 7.62MM X 51MM BELT FED

HAND GUARD RIGHT & LEFT AS PER DRG.NO. 1804 01 01 00 00 001 00DA & 1804 01 01 00 00 002 00DA REQUIRED FOR LMG 7.62MM X 51MM BELT FED

1804 01 01 00 00 001 00DA & 1804 01 01 00 00 002 00DA

• Moulding & Machining,

• 1) Chemical & Mechanical properties as per std. given drawing. 2) Dimensional inspection, for all dimensions given in the drawing & other parameter which are mentioned in relevant drawings.

HEATING BLANKET FOR 'DHANUSH' TO DOCUMENT NO.GCF/50/41169.

HEATING BLANKET FOR 'DHANUSH' TO DOCUMENT NO.GCF/50/41169.

• As per tender document Part A & QAP

• As per tender document Part A & QAP

HOT AIR STARTER AID FOR OM616 TO DRG. NO. AW2-23-1-411-0001.

HOT AIR STARTER AID FOR OM616 TO DRG. NO. AW2-23-1-411-0001.

• As per Tender Document Part A

• As per Tender Document Part A

DEVELOPMENT AND SUPPLY OF COLD START KIT FOR OM616 ENGINE AS PER SCOPE OF WORK.

DEVELOPMENT AND SUPPLY OF COLD START KIT FOR OM616 ENGINE AS PER SCOPE OF WORK.

• As per Tender Document Part A & QAP

• As per Tender Document Part A & QAP

MANUFACTURE AND SUPPLY OF MGL BRUSH EXTRACTOR BEFORE ANODIC COATING TO DRG NO TEND 2261 ST WITHS MATERIAL

MANUFACTURE AND SUPPLY OF MGL BRUSH EXTRACTOR BEFORE ANODIC COATING TO DRG NO TEND 2261 ST WITHS MATERIAL

• AS PER OFT REQUIREMENTS

• AS PER OFT REQUIREMENTS

MANUFACTURE AND SUPPLY OF MGL BLOCK SCREW PISTOL GRIP TO DRG NO 30P 3015 ST 3 WITH FIRM MATERIAL

MANUFACTURE AND SUPPLY OF MGL BLOCK SCREW PISTOL GRIP TO DRG NO 30P 3015 ST 3 WITH FIRM MATERIAL

30P 3015 STAR 3

• AS PER OFT REQUIREMENTS

• AS PER OFT REQUIREMENTS

Cordage Nylon Braided Variety No. 8

IS : 4227-1998 V. No. 8

• As per Specification/drawing

• As per Specification/drawing

9080081315 BOX TO DRG N1ICM 320A DS CAT NO 8115002944

9080081315 BOX TO DRG N1ICM 320A DS CAT NO 8115002944

DRG N1ICM 320A DS CAT NO 8115002944

• 9080081315 BOX TO DRG N1ICM 320A DS CAT NO 8115002944

• 9080081315 BOX TO DRG N1ICM 320A DS CAT NO 8115002944

9910448141 NUT PLAIN WING IFL 8551 ILG 20072 IFL 8551

9910448141 NUT PLAIN WING IFL 8551 ILG 20072 IFL 8551

IFL 8551

• 9910448141 NUT PLAIN WING IFL 8551 ILG 20072 IFL 8551

• 9910448141 NUT PLAIN WING IFL 8551 ILG 20072 IFL 8551

PRESSURE GAUGE MT-60 YP TO DRG NO. 2B2.830.646CB-01

PRESSURE GAUGE MT-60 YP TO DRG NO. 2B2.830.646CB-01

2B2.830.646CB-01

• ATTACHED

• ATTACHED

RADIATOR WATER LH ASSY TO DRG NO. 175.31.001CB-ACB

RADIATOR WATER LH ASSY TO DRG NO. 175.31.001CB-ACB

175.31.001CB-ACB

• ATTACHED

• ATTACHED

WATER RADIATOR RH TO DRG NO. 175.31.002CB

WATER RADIATOR RH TO DRG NO. 175.31.002CB

175.31.002CB

• ATTACHED

• ATTACHED

Fabrication of Sub-Assemblies of Parachute As per OPF Drg.No. GA-14R45/ABHC(6)

As per OPF Drg.No. GA-14R45/ABHC(6)

• As per specification/drawing

• As per specification/drawing

Fabrication of Sub-Assemblies of Parachute As per OPF Drg. No. GA-16-20-1-18

As per OPF Drg. No. GA-16-20-1-18

• As per specification/drawing

• As per specification/drawing

BUTTON POLYESTER REV 19MM CAMOUFLAGE DIGITAL PRINT SPECIFICATION IS 1461-1984 2nd REV (RA 2023) Except that (i) material shall be polyester (ii) design and dimension as per drawing No OCFS/TS/BPR/19 and as per sample held with OCFS

BUTTON POLYESTER REV 19MM CAMOUFLAGE DIGITAL PRINT SPECIFICATION IS 1461-1984 2nd REV (RA 2023) Except that (i) material shall be polyester (ii) design and dimension as per drawing No OCFS/TS/BPR/19 and as per sample held with OCFS

• as per attached file

• as per attached file

CAPSULE IN CASE DRG NO. Y2829480 L.F-9023081556

CAPSULE IN CASE DRG NO. Y2829480

Y2829480

• OPTO-MECHANICAL COMPONENT

• OPTO-MECHANICAL COMPONENT

PIN DRG No SK- 6531/ TE

PIN DRG No SK- 6531/ TE

DRG No SK- 6531/ TE

• MACHINING

• 1-Chemical and mechanical properties as per std. given drawing.
• 2- Dimensional inspection, for all dimensions given in the drawing and other parameter which are mentioned in relevant drawing

SPRING DRG No SK- 6536/ TE

SPRING DRG No SK- 6536/ TE

DRG No SK- 6536/ TE

• SPRING MANUFACTURING TECH.(COILING)

• 1-Chemical and mechanical properties as per std. given drawing.
• 2- Dimensional inspection, for all dimensions given in the drawing and other parameter which are mentioned in relevant drawing

LATCH DRG No SK- 6535 /TE

LATCH DRG No SK- 6535 /TE

DRG No SK- 6535 /TE

• MACHINING

• 1-Chemical and mechanical properties as per std. given drawing.
• 2- Dimensional inspection, for all dimensions given in the drawing and other parameter which are mentioned in relevant drawing

SLIDE DRG No SK-6534/TE

SLIDE DRG No SK-6534/TE

DRG No SK-6534/TE

• MACHINING

• 1-Chemical and mechanical properties as per std. given drawing.
• 2- Dimensional inspection, for all dimensions given in the drawing and other parameter which are mentioned in relevant drawing

SPRING DRG. NO. SK-6542/TE

SPRING DRG. NO. SK-6542/TE

DRG. NO. SK-6542/TE

• Spring Manufacturing Tech. (Coilling)

• Chemical and mechanical properties as per std. given drawing.
• Dimensional inspection, for all dimensions given in the drawing and other parameter which are mentioned in relevant drawing

RETAINER Drg. No. SK-6526/TE

RETAINER Drg. No. SK-6526/TE

Drg. No. SK-6526/TE

• MACHINING

• Chemical and mechanical properties as per std. given drawing.
• Dimensional inspection, for all dimensions given in the drawing and other parameter which are mentioned in relevant drawing

SIGHT LEAF DRG No SK-6540/TE

SIGHT LEAF DRG No SK-6540/TE

SK-6540/TE

• MACHINING

• 1-Chemical and mechanical properties as per std. given drawing.
• 2- Dimensional inspection, for all dimensions given in the drawing and other parameter which are mentioned in relevant drawing.

Fabrication of Sub-Assemblies of Parachute As per OPF Drg No GA 16 20 1 13

As per OPF Drg. No. GA-16-20-1-13

• AS PER SPECIFICATION/DRAWING

• AS PER SPECIFICATION/DRAWING

TORSION SHAFT OPN 10 TO 30 TO DRG NO 172.45.344/SMF

GOST 4543-71

172.45.344/SMF

• AS PER VQC

• AS PER QAP

SUN GEAR OF 1ST PLANETARY GEAR SET OPN 10 TO 30 SEMI MACHINED FORGING TO DRG NO 172 40 304 -1 SMF

GOST 4543-71

172.40.304 -1/SMF

• AS PER VQC

• AS PER QAP

CROWN GEAR OF THIRD PLANETARY GEAR SET TO DRG. NO. 172.40.310/F

GOST 4543-71

172.40.310/F

• AS PER VQC

• AS PER QAP

CONVERSION OF FUZE HOLDER TO OFAJ DRG NO. FS 3025 INTO FUZE HOLDER ASSY TO OFAJ DRAWING NO. FS-3027 BY VULCANIZATION

CONVERSION OF FUZE HOLDER TO OFAJ DRG NO. FS 3025 INTO FUZE HOLDER ASSY TO OFAJ DRAWING NO. FS-3027 BY VULCANIZATION

• AS PER QMI

• AS PER PQ

synthetic hook & loop fastener various sizes and colours specification IS 8156 2014 3rd REV except that the peel strength shall be 250g/cm min and sheer strength 900 g/cm2 min pantone shade No 19 5917 TCX green with best trade quality

synthetic hook & loop fastener various sizes and colours specification IS 8156 2014 3rd REV except that the peel strength shall be 250g/cm min and sheer strength 900 g/cm2 min pantone shade No 19 5917 TCX green with best trade quality

• as per attached file

• as per attached file

TAPE ELASTIC 22 MM WIDE PANTONE SHADE No 19 5513 TPX OLIVE GREEN SPECIFICATION No IS: 9686-1980 AMENDMENT No 1 REAFFIRMED 2012 THICKNESS 0.76 mm AT 10KPa WHEN TESTED TO IS 7702 AND BREAKING STRENGTH 278N/20point5 mm WHEN TESTED TO IS 1969

TAPE ELASTIC 22 MM WIDE PANTONE SHADE No 19 5513 TPX OLIVE GREEN SPECIFICATION No IS: 9686-1980 AMENDMENT No 1 REAFFIRMED 2012 THICKNESS 0.76 mm AT 10KPa WHEN TESTED TO IS 7702 AND BREAKING STRENGTH 278N/20point5 mm WHEN TESTED TO IS 1969

• as per attached file

• as per attached file

Synthetic tape 12 mm pantone shade No 19 5917 TCX green Specification 0.46 mm min thick at 10 Kpa pressure when tested to IS 7702 and Breaking Strength 507 N/10.5 mm when tested to IS 1969 with best trade quality

Synthetic tape 12 mm pantone shade No 19 5917 TCX green Specification 0.46 mm min thick at 10 Kpa pressure when tested to IS 7702 and Breaking Strength 507 N/10.5 mm when tested to IS 1969 with best trade quality

• as per attached file

• as per attached file

TAPE ELASTIC 25MM WIDE WHITE. SPECIFICATION IS: 9686-1980 AMDT No 1 REAFFIRMED 2012

TAPE ELASTIC 25MM WIDE WHITE. SPECIFICATION IS: 9686-1980 AMDT No 1 REAFFIRMED 2012

• AS PER ATTACHED FILE

• AS PER ATTACHED FILE

SPECIFICATION FOR NYLON PUSH TAB (CYLINDRICAL) DOUBLE HOLE SPRING TYPE PANTONE SHADE No 19 5917 TCX AS PER DRAWING No OCFS/TS/PSDHST AND AS PER SAMPLE HELD WITH OCFS WITH BEST TRADE QUALITY AND SPECIFICATION FOR NYLON PUSH TAB SINGLE HOLE SPRING TYPE WITH ARRANGEMENT OF PASSING OF 7mm TAPE PANTONE SHADE No 19 5917 TCX AS PER DRAWING No OCFS/TS/PSSHSTN AND AS PER SAMPLE HELD WITH OCFS WITH BEST TRADE QUALITY

SPECIFICATION FOR NYLON PUSH TAB (CYLINDRICAL) DOUBLE HOLE SPRING TYPE PANTONE SHADE No 19 5917 TCX AS PER DRAWING No OCFS/TS/PSDHST AND AS PER SAMPLE HELD WITH OCFS WITH BEST TRADE QUALITY AND SPECIFICATION FOR NYLON PUSH TAB SINGLE HOLE SPRING TYPE WITH ARRANGEMENT OF PASSING OF 7mm TAPE PANTONE SHADE No 19 5917 TCX AS PER DRAWING No OCFS/TS/PSSHSTN AND AS PER SAMPLE HELD WITH OCFS WITH BEST TRADE QUALITY

• as per attached file

• as per attached file

Appendix 'C' of Provisional specification No. S/2594/C/CCWDCP/TC-15(a) and Cuff Rib in Tubular Form for 9 cm width and knitted fabric is in open width and 2x2 durby knit for 90 cm width

Appendix 'C' of Provisional specification No. S/2594/C/CCWDCP/TC-15(a) and Cuff Rib in Tubular Form for 9 cm width and knitted fabric is in open width and 2x2 durby knit for 90 cm width

• as per attached file

• as per attached file

Appendix 'C' of Provisional specification No. S/2594/C/CCWDCP/TC-15(a) and Cuff Rib in Tubular Form for 9 cm width and knitted fabric is in open width and 2x2 durby knit for 90 cm width

Appendix 'C' of Provisional specification No. S/2594/C/CCWDCP/TC-15(a) and Cuff Rib in Tubular Form for 9 cm width and knitted fabric is in open width and 2x2 durby knit for 90 cm width

• as per attached file

• as per attached file

SEALING CAP FOR CORD MADE FROM HIGH DENSITY POLYETHYLENE. PANTONE SHADE No 19-5917 TCX As per drawing No OCFS/TS/PAT & As per sample held with OCFS, specification best trade quality.

SEALING CAP FOR CORD MADE FROM HIGH DENSITY POLYETHYLENE. PANTONE SHADE No 19-5917 TCX As per drawing No OCFS/TS/PAT & As per sample held with OCFS, specification best trade quality.

drawing No OCFS/TS/PAT

• as per attached file

• as per attached file

PLASTIC RING FOR CORD as per Drawing and sample held with OCFS Pantone Shade No 19 5917 TCX (green) as per Drawing No OCFS/TS/PRC & as per sample held with OCFS Specification Best Trade quality

PLASTIC RING FOR CORD as per Drawing and sample held with OCFS Pantone Shade No 19 5917 TCX (green) as per Drawing No OCFS/TS/PRC & as per sample held with OCFS Specification Best Trade quality

• as per attached file

• as per attached file

1 ELASTIC CORD 2.8 mm DIA PANTONE SHADE No 19 5513 TPX (OLIVE GREEN) SPECIFICATION diameter 2.8 mm breaking strength 17 kgf with best trade quality 2 ELASTIC CORD 2.8 mm DIA PANTONE SHADE No 19 5917 TCX (GREEN) SPECIFICATION diameter 2.8 mm breaking strength 17 kgf with best trade quality

ELASTIC CORD 2.8 mm DIA PANTONE SHADE No 19 5513 TPX OLIVE GREEN SPECIFICATION diameter 2.8 mm breaking strength 17 kgf with best trade quality

• as per attached file

• as per attached file

SPECIFICATION FOR NYLON PUSH TAB (CYLINDRICAL) DOUBLE HOLE SPRING TYPE PANTONE SHADE No 19 5917 TCX AS PER DRAWING No OCFS/TS/PSDHST AND AS PER SAMPLE HELD WITH OCFS WITH BEST TRADE QUALITY AND SPECIFICATION FOR NYLON PUSH TAB SINGLE HOLE SPRING TYPE WITH ARRANGEMENT OF PASSING OF 7mm TAPE PANTONE SHADE No 19 5917 TCX AS PER DRAWING No OCFS/TS/PSSHSTN AND AS PER SAMPLE HELD WITH OCFS WITH BEST TRADE QUALITY

SPECIFICATION FOR NYLON PUSH TAB (CYLINDRICAL) DOUBLE HOLE SPRING TYPE PANTONE SHADE No 19 5917 TCX AS PER DRAWING No OCFS/TS/PSDHST AND AS PER SAMPLE HELD WITH OCFS WITH BEST TRADE QUALITY AND SPECIFICATION FOR NYLON PUSH TAB SINGLE HOLE SPRING TYPE WITH ARRANGEMENT OF PASSING OF 7mm TAPE PANTONE SHADE No 19 5917 TCX AS PER DRAWING No OCFS/TS/PSSHSTN AND AS PER SAMPLE HELD WITH OCFS WITH BEST TRADE QUALITY

• as per attached file

• as per attached file

SYNTHETIC TAPE 25 MM PANTONE SHADE No 19 5917 TCX (GREEN) SPECIFICATION 0.46 mm min THICK AT 10 Kpa PRESSURE WHEN TESTED TO IS 7702 AND BREAKING STRENGTH 900 N/20.5 mm WHEN TESTED TO IS 1969 WITH BEST TRADE QUALITY

SYNTHETIC TAPE 25 MM PANTONE SHADE No 19 5917 TCX (GREEN) SPECIFICATION 0.46 mm min THICK AT 10 Kpa PRESSURE WHEN TESTED TO IS 7702 AND BREAKING STRENGTH 900 N/20.5 mm WHEN TESTED TO IS 1969 WITH BEST TRADE QUALITY

• AS PER ATTACHED FILE

• AS PER ATTACHED FILE

EYELET STEEL OG COATED PANTONE SHADE No 19 5917 TCX (GREEN) Specn. DMSRDE/LE 2/2000/EYELET (FOR DIMENSION AND SHAPE ONLY)

EYELET STEEL OG COATED PANTONE SHADE No 19 5917 TCX (GREEN) Specn. DMSRDE/LE 2/2000/EYELET (FOR DIMENSION AND SHAPE ONLY)

• AS PER FILE ATTACHED

• AS PER FILE ATTACHED

9077100212 TAIL D C MK 4 STAMP NO 6990 TO DRAWING NO NAD 7533

9077100212 TAIL D C MK 4 STAMP NO 6990 TO DRAWING NO NAD 7533

NAD 7533

• 9077100212 TAIL D C MK 4 STAMP NO 6990 TO DRAWING NO NAD 7533

• 9077100212 TAIL D C MK 4 STAMP NO 6990 TO DRAWING NO NAD 7533

OPTICAL SENDING UNIT OD1 -1C /DRG .NO .OD1 -1C .000TY (LF.NO.6201070199)

OPTICAL SENDING UNIT OD1 -1C /DRG .NO .OD1 -1C .000TY (LF.NO.6201070199)

DRG .NO .OD1 -1C .000TY

• ATTACHED

• CGM/HVF

WATER PUMP TO DRG NO.SB 411-00-56

WATER PUMP TO DRG NO.SB 411-00-56

SB 411-00-56

• AS PER DRAWING, PQC, QAP AND ITEM SPCIFICATION

• AS PER DRAWING, PQC, QAP AND ITEM SPCIFICATION

PIN TYPE HEATER PLUG ASSY TO DRG NO.17-3740-000 SB

PIN TYPE HEATER PLUG ASSY TO DRG NO.17-3740-000 SB

17-3740-000 SB

• AS PER DRAWING, PQC, QAP AND ITEM SPCIFICATION

• AS PER DRAWING, PQC, QAP AND ITEM SPCIFICATION

INSTALLATION OF BREATHING SYSTEM TO DRG NO.SB 3342-00-21A

INSTALLATION OF BREATHING SYSTEM TO DRG NO.SB 3342-00-21A

SB 3342-00-21A

• AS PER DRAWING, PQC, QAP AND ITEM SPCIFICATION

• AS PER DRAWING, PQC, QAP AND ITEM SPCIFICATION

LOW PRESSURE FUEL PIPE TO DRG NO.SB 3335-00-9

LOW PRESSURE FUEL PIPE TO DRG NO. SB 3335-00-9

SB 3335-00-9

• AS PER DRAWING, PQC, QAP AND ITEM SPCIFICATION

• AS PER DRAWING, PQC, QAP AND ITEM SPCIFICATION

BEARING BOX (BALL BEARING AXLE BOX ASSY) TO DRG NO.SB 3327-02-8-01

BEARING BOX (BALL BEARING AXLE BOX ASSY) TO DRG NO.SB 3327-02-8-01

SB 3327-02-8-01

• AS PER DRAWING,PQC, QAP AND ITEM SPECIFICATION

• AS PER DRAWING,PQC, QAP AND ITEM SPECIFICATION

ASSY TOOTHED CONTROL RACK TO DRG NO. SK/1382

ASSY TOOTHED CONTROL RACK TO DRG NO. SK/1382

• ASSY TOOTHED CONTROL RACK TO DRG NO. SK/1382

• ASSY TOOTHED CONTROL RACK TO DRG NO. SK/1382

FIP DRIVE COUPLING ASSY TO DRG NO.SB 326-00-1

FIP DRIVE COUPLING ASSY TO DRG NO.SB 326-00-1

SB 326-00-1

• AS PER DRAWING, PQC, QAP AND ITEM SPCIFICATION

• AS PER DRAWING, PQC, QAP AND ITEM SPCIFICATION

FUEL PUMP DRIVE HOUSING ASSY TO DRG NO. SB 3308-04-24

FUEL PUMP DRIVE HOUSING ASSY TO DRG NO. SB 3308-04-24

DRG NO. SB 3308-04-24

• AS PER DRAWING,PQC, QAP AND ITEM SPECIFICATIONS

• AS PER DRAWING,PQC, QAP AND ITEM SPECIFICATIONS

LH HEAD COVER TO DRG NO.SB 306-09-8

LH HEAD COVER TO DRG NO.SB 306-09-8

• AS PER DRAWING,PQC,QAP AND ITEM SPCIFICATION

• AS PER DRAWING,PQC,QAP AND ITEM SPCIFICATION

ASSY EXHAUST VALVE WITH DISC LOCK TO DRG NO.CQA(HV)506-614E

ASSY EXHAUST VALVE WITH DISC LOCK TO DRG NO.CQA(HV)506-614E

CQA(HV)506-614E

• AS PER DRAWING, PQC,QAP AND ITEM SPECIFICATION

• AS PER DRAWING, PQC,QAP AND ITEM SPECIFICATION

ASSY INLET VALVE WITH DISC LOCK TO DRG NO. CQA(HV)506-613E

ASSY INLET VALVE WITH DISC LOCK TO DRG NO. CQA(HV)506-613E

CQA(HV)506-613E

• AS PER DRAWING, PQC, QAP AND ITEM SPCIFICATION

• AS PER DRAWING, PQC, QAP AND ITEM SPCIFICATION

RH HEAD COVER TO DRG NO.SB 406-08-3

RH HEAD COVER TO DRG NO.SB 406-08-3

SB 406-08-3

• AS PER DRAWING,PQC,QAP AND ITEM SPECIFICATION

• AS PER DRAWING,PQC,QAP AND ITEM SPECIFICATION

PISTON WITH RINGS ASSY TO DRG NO.SB 304-01-1

PISTON WITH RINGS ASSY TO DRG NO.SB 304-01-1

SB 304-01-1

• AS PER DRAWING, PQC,QAP AND ITEM SPECIFICATION

• AS PER DRAWING, PQC,QAP AND ITEM SPECIFICATION

LH CYLINDRICAL JACKET TO DRG NO.SB 303-02-23

LH CYLINDRICAL JACKET TO DRG NO.SB 303-02-23

SB 303-02-23

• AS PER DRAWING, PQC,QAP AND ITEM SPECIFICATION

• AS PER DRAWING, PQC,QAP AND ITEM SPECIFICATION

RH CYLINDRICAL JACKET TO DRG NO.SB 303-03-16

RH CYLINDRICAL JACKET TO DRG NO.SB 303-03-16

SB 303-03-16

• AS PER DRAWING, PQC,QAP AND ITEM SPECIFICATION

• AS PER DRAWING, PQC,QAP AND ITEM SPECIFICATION