FABRIC NYLON 50 GMS RIP STOP WR OG PU COATED WIDTH 160 CM

AS PER APPENDIX – A OF PROV SPEC NO S/6421/BAG SLEEPING LT WT/TC - 6

• AS PER SPECIFICATION

• AS PER SPECIFICATION

HAND GUARD ASSEMBLY SK- 6624/TE

HAND GUARD ASSEMBLY SK- 6624/TE

SK- 6624/TE

• METAL FORMING, CASTING, MACHINING AND MOULDING

• Dimensional inspection, for all dimensions given in the drawing a other parameter which are mentioned in relevant drawing
• Chemical and mechanical properties as per std. given drawing.

MAGAZINE ASSEMBLY SK- 6614/TE

MAGAZINE ASSEMBLY SK- 6614/TE

SK- 6614/TE

• METAL FORMING MIM, COILING, MACHINING AND MOULDING

• Chemical and mechanical properties as per std. given drawing.
• Dimensional inspection, for all dimensions given in the drawing a other parameter which are mentioned in relevant drawing

OILER ASSEMBLY SK- 6641/TE

OILER ASSEMBLY SK- 6641/TE

SK- 6641/TE

• MOULDING

• Dimensional inspection, for all dimensions given in the drawing a other parameter which are mentioned in relevant drawing
• Chemical and mechanical properties as per std. given drawing.

FORE GRIP ASSEMBLY SK- 6632/TE

FORE GRIP ASSEMBLY SK- 6632/TE

SK- 6632/TE

• METAL FORMING,MACHINING AND MOULDING

• Chemical and mechanical properties as per std. given drawing.
• Dimensional inspection, for all dimensions given in the drawing a other parameter which are mentioned in relevant drawing

FORE END RING ASSEMBLY SK- 6545/TE

FORE END RING ASSEMBLY SK- 6545/TE

SK- 6543/TE, SK-6544/TE SK- 6545/TE

• CASTING AND MACHINING

• Chemical and mechanical properties as per std. given drawing.
• Dimensional inspection, for all dimensions given in the drawing a other parameter which are mentioned in relevant drawing

COVER WITH REINFORCING PLATE SK-6549/TE

COVER WITH REINFORCING PLATE SK-6549/TE

SK- 6546/TE SK-6549/TE SK-6612/TE

• METAL FORMING

• Chemical and mechanical properties as per std. given drawing.
• Dimensional inspection, for all dimensions given in the drawing a other parameter which are mentioned in relevant drawing

RAIL SK-6548/ TE

RAIL SK-6548/ TE

SK-6548/ TE

• MACHINING

• Dimensional inspection, for all dimensions given in the drawing a other parameter which are mentioned in relevant drawing
• Chemical and mechanical properties as per std. given drawing.

RIVET SK- 6529/ TE

RIVET SK- 6529/ TE

SK- 6529/ TE

• MACHINING

• Chemical and mechanical properties as per std. given drawing.
• Dimensional inspection, for all dimensions given in the drawing a other parameter which are mentioned in relevant drawing

SHAFT TORSION FORGING TO DRG NO 172.51.016/F

GOST 4543-71

172.51.016/F

• AS PER VQC

• AS PER QAP

RH MIDDLE ENGAGING RING TO DRG NO 172.40.329/F

GOST 4543-71

172.40.329/F

• AS PER VQC

• AS PER QAP

Recrystallised Hexamine as per B.F. Specification 1.33 dated 29.09.2023 having Total Hexamine content 99.5% (min) & pH 9.5 (max)

Recrystallised Hexamine as per B.F. Specification 1.33 dated 29.09.2023 having Total Hexamine content 99.5% (min) & pH 9.5 (max)

• MSME

• B.F. Specification 1.33 dated 29.09.2023 having Total Hexamine content 99.5% (min) & pH 9.5 (max)

FABRIC NYLON PU COATED WATER PROOF OG 115 GSM WIDTH 180 +2 CMS NO NEGATIVE TOLERANCE

PROV SPECIFICATION NO S/6421/BAG SLEEPING LT WT/TC-6

• AS PER SPECIFICATION

• AS PER SPECIFICATION

175.04.004CB-1

175.04.004CB-1

175.04.004CB-1

• AS PER VQC ATTACHED
• -
• -
• -
• -

• AS PER VQC ATTACHED
• -
• -
• -
• -

SETTING PIECE AL8604431 LF 7445191497

AL8604431

AL8604431

• MECHANICAL COMPONENT

• MECHANICAL COMPONENT

PIN AL8960294 LF 7445108229

AL8960294

AL8960294

• MECHANICAL COMPONENT

• MECHANICAL COMPONENT

FLANGE DRG NO Y7493388 LF NO 7440207515

FLANGE DRG NO Y7493388 LF NO 7440207515

Y7493388

• MECHANICAL COMPONENT

• MECHANICAL COMPONENT

CARDEN HEAD AL8236256 LF 7440206006

AL8236256

AL8236256

• MECHANICAL COMPONENT

• MECHANICAL COMPONENT

BASE LF 7440205774

BASE LF 7440205774

AL8.070.174

• MECHANICAL ITEM

• MECHANICAL ITEM

SETTING PIECE AL8604589 LF 7440201617

AL8604589

AL8604589

• MECHANICAL COMPONENT

• MECHANICAL COMPONENT

PULLEY AL8322056 LF 7440200773

AL8322056

AL8322056

• MECHANICAL COMPONENET

• MECHANICAL COMPONENET

Cleaning Rod Drg No. SK- 6574/ TE

Cleaning Rod Drg No. SK- 6574/ TE

SK- 6574/ TE

• Machining

• Chemical and mechanical properties as per std. given drawing.
• Dimensional inspection, for all dimensions given in the drawing a other parameter which are mentioned in relevant drawing

MANUFACTURE AND SUPPLY OF MGL BUSH EXTRACTOR BEFORE ANODIC COATING TO DRG NO TEND 2261 ST WITH FIRMS MATERIAL

MANUFACTURE AND SUPPLY OF MGL BUSH EXTRACTOR BEFORE ANODIC COATING TO DRG NO TEND 2261 ST WITH FIRMS MATERIAL

TEND 2261 STAR

• AS PER OFT REQUIREMENT

• AS PER OFT REQUIREMENT

Accessories in Container Assembly SK 6601 TE

Accessories in Container Assembly SK 6601 TE

SK- 6601/TE

• FOR SK-6603/TE & SK-6604/TE- Metal forming, For SK-6605/TE- Four sided swaging For SK-6606/TE-Twisting For SK-6607/TE, SK-6608/TE, SK-6609/TE and SK-6610/TE- Machining

• 1-Chemical and mechanical properties as per std. given drawing.
• 2- Dimensional inspection, for all dimensions given in the drawing a other parameter which are mentioned in relevant drawing

Automotive Components for MPV 4X4 MK-V as per Annexure-A

Annexure-A

• As per Annexure-A

• As per Annexure-A

DESIGN , DEVLOPEMENT AND SUPPLY OF TWO SETS OF 40MM AD GUN SUSPENSION SYSTEM AS PER THE SCOPE OF WORK ATTACHED

DESIGN , DEVLOPEMENT AND SUPPLY OF TWO SETS OF 40MM AD GUN SUSPENSION SYSTEM AS PER THE SCOPE OF WORK ATTACHED

DESIGN , DEVLOPEMENT AND SUPPLY OF TWO SETS OF 40MM AD GUN SUSPENSION SYSTEM AS PER THE SCOPE OF WORK ATTACHED

• DESIGN , DEVLOPEMENT AND SUPPLY OF TWO SETS OF 40MM AD GUN SUSPENSION SYSTEM AS PER THE SCOPE OF WORK ATTACHED

• DESIGN , DEVLOPEMENT AND SUPPLY OF TWO SETS OF 40MM AD GUN SUSPENSION SYSTEM AS PER THE SCOPE OF WORK ATTACHED

LF 7441125588 PCB As Per Drg. 1368824100

LF 7441125588 PCB As Per Drg. 1368824100

LF 7441125588 PCB As Per Drg. 1368824100

• Manufacturing Technology

• Testing / Inspection Facility

LF 7441125587 PCB As Per Drg 1368824800

LF 7441125587 PCB As Per Drg 1368824800

LF 7441125587 PCB As Per Drg 1368824800

• Manufacturing Technology

• Testing / Inspection Facility

LF 7441125586 PCB As Per Drg. 1368823600

LF 7441125586 PCB As Per Drg. 1368823600

LF 7441125586 PCB As Per Drg. 1368823600

• Manufacturing Technology

• Testing / Inspection Facility

LF 7441125585 PCB As Per Drg. 1368822700

LF 7441125585 PCB As Per Drg. 1368822700

LF 7441125585 PCB As Per Drg. 1368822700

• Manufacturing Technology

• Testing / Inspection Facility

LF 7441125584 PCB As Per Drg. 1368821200

LF 7441125584 PCB As Per Drg. 1368821200

LF 7441125584 PCB As Per Drg. 1368821200

• Manufacturing Technology

• Testing / Inspection Facility

LF 7441125583 PCB As Per Drg. 1368820400

LF 7441125583 PCB As Per Drg. 1368820400

LF 7441125583 PCB As Per Drg. 1368820400

• Manufacturing Technology

• Testing / Inspection Facility

LF 7441125582 Pcb As Per Drg1368503900

LF 7441125582 Pcb As Per Drg1368503900

LF 7441125582 Pcb As Per Drg1368503900

• Manufacturing Technology

• Testing Inspection Facility

LF 7441125581 PCB As Per Drg. 1368503600

LF 7441125581 PCB As Per Drg. 1368503600

LF 7441125581 PCB As Per Drg. 1368503600

• Manufacturing Technology

• Testing / Inspection Facility

LF 7441125580 PCB As Per Drg. 1368489400

LF 7441125580 PCB As Per Drg. 1368489400

LF 7441125580 PCB As Per Drg. 1368489400

• Manufacturing Technology

• Testing / Inspection Facility

LF 7441125579 PCB As Per Drg 1368489200

LF 7441125579 PCB As Per Drg 1368489200

LF 7441125579 PCB As Per Drg 1368489200

• Manufacturing Technology

• Testing / Inspection Facility

LF-7441125578 PCB As Per Drg. 1368480400

LF-7441125578 PCB As Per Drg. 1368480400

LF-7441125578 PCB As Per Drg. 1368480400

• Manufacturing Technology

• Testing / Inspection Facility

LF-7440206167 Reflector As Per Drg. IUMK203.625. 002

LF-7440206167 Reflector As Per Drg. IUMK203.625. 002

LF-7440206167 Reflector As Per Drg. IUMK203.625. 002

• Manufacturing Technology

• Testing / Inspection Facility

LF-7440208484, PANEL(OCCULAR) As Per Drg. AL6.122. 940

LF-7440208484, PANEL(OCCULAR) As Per Drg. AL6.122. 940

LF-7440208484, PANEL(OCCULAR) As Per Drg. AL6.122. 940

• Manufacturing Technology

• Testing / Inspection Facility

LF-7440208475 BOARD As Per Drg. IUMK. 687242.004

LF-7440208475 BOARD As Per Drg. IUMK. 687242.004

LF-7440208475 BOARD As Per Drg. IUMK. 687242.004

• Manufacturing Technology

• Testing / Inspection Facility

LF-7440208476 EXCEEDING MECHANISM As Per Drg. AL6.060. 022

LF-7440208476 EXCEEDING MECHANISM As Per Drg. AL6.060. 022

LF-7440208476 EXCEEDING MECHANISM As Per Drg. AL6.060. 022

• Manufacturing Technology

• Testing Inspection Facility

LF-7440208472 SCREW DOWN MECHANISM As Per Drg. AL5.139. 126

LF-7440208472 SCREW DOWN MECHANISM As Per Drg. AL5.139. 126

LF-7440208472 SCREW DOWN MECHANISM As Per Drg. AL5.139. 126

• Manufacturing Technology

• Testing Inspection facility

BLOCK GAS IN FINISH CONDITION AS PER D.S.CAT NO;1005-006815 FOR MAG 7.62MM (BORE SIZE DIA 23.021 TO 23.037MM)

BLOCK GAS IN FINISH CONDITION AS PER D.S.CAT NO;1005-006815 FOR MAG 7.62MM (BORE SIZE DIA 23.021 TO 23.037MM)

D.S.CAT NO;1005-006815

• Machining

• 1) Chemical & Mechanical properties as per std. given drawing. 2) Dimensional inspection, for all dimensions given in the drawings & other parameter which are mentioned in relevant drawings.

FEED TRAY INTEGRATED AS PER DRG.NO. 1804 01 05 00 00 001 00DA REQUIRED FOR LMG 7.62MM X 51MM BELT FED

FEED TRAY INTEGRATED AS PER DRG.NO. 1804 01 05 00 00 001 00DA REQUIRED FOR LMG 7.62MM X 51MM BELT FED

1804 01 05 00 00 001 00DA

• Machining

• 1) Chemical & Mechanical properties as per std. given drawing. 2) Dimensional inspection, for all dimensions given in the drawing & other parameter which are mentioned in relevant drawings.

HAND GUARD RIGHT & LEFT AS PER DRG.NO. 1804 01 01 00 00 001 00DA & 1804 01 01 00 00 002 00DA REQUIRED FOR LMG 7.62MM X 51MM BELT FED

HAND GUARD RIGHT & LEFT AS PER DRG.NO. 1804 01 01 00 00 001 00DA & 1804 01 01 00 00 002 00DA REQUIRED FOR LMG 7.62MM X 51MM BELT FED

1804 01 01 00 00 001 00DA & 1804 01 01 00 00 002 00DA

• Moulding & Machining,

• 1) Chemical & Mechanical properties as per std. given drawing. 2) Dimensional inspection, for all dimensions given in the drawing & other parameter which are mentioned in relevant drawings.

HEATING BLANKET FOR 'DHANUSH' TO DOCUMENT NO.GCF/50/41169.

HEATING BLANKET FOR 'DHANUSH' TO DOCUMENT NO.GCF/50/41169.

• As per tender document Part A & QAP

• As per tender document Part A & QAP

HOT AIR STARTER AID FOR OM616 TO DRG. NO. AW2-23-1-411-0001.

HOT AIR STARTER AID FOR OM616 TO DRG. NO. AW2-23-1-411-0001.

• As per Tender Document Part A

• As per Tender Document Part A

DEVELOPMENT AND SUPPLY OF COLD START KIT FOR OM616 ENGINE AS PER SCOPE OF WORK.

DEVELOPMENT AND SUPPLY OF COLD START KIT FOR OM616 ENGINE AS PER SCOPE OF WORK.

• As per Tender Document Part A & QAP

• As per Tender Document Part A & QAP

MANUFACTURE AND SUPPLY OF MGL BRUSH EXTRACTOR BEFORE ANODIC COATING TO DRG NO TEND 2261 ST WITHS MATERIAL

MANUFACTURE AND SUPPLY OF MGL BRUSH EXTRACTOR BEFORE ANODIC COATING TO DRG NO TEND 2261 ST WITHS MATERIAL

• AS PER OFT REQUIREMENTS

• AS PER OFT REQUIREMENTS

MANUFACTURE AND SUPPLY OF MGL BLOCK SCREW PISTOL GRIP TO DRG NO 30P 3015 ST 3 WITH FIRM MATERIAL

MANUFACTURE AND SUPPLY OF MGL BLOCK SCREW PISTOL GRIP TO DRG NO 30P 3015 ST 3 WITH FIRM MATERIAL

30P 3015 STAR 3

• AS PER OFT REQUIREMENTS

• AS PER OFT REQUIREMENTS

Cordage Nylon Braided Variety No. 8

IS : 4227-1998 V. No. 8

• As per Specification/drawing

• As per Specification/drawing

9080081315 BOX TO DRG N1ICM 320A DS CAT NO 8115002944

9080081315 BOX TO DRG N1ICM 320A DS CAT NO 8115002944

DRG N1ICM 320A DS CAT NO 8115002944

• 9080081315 BOX TO DRG N1ICM 320A DS CAT NO 8115002944

• 9080081315 BOX TO DRG N1ICM 320A DS CAT NO 8115002944

9910448141 NUT PLAIN WING IFL 8551 ILG 20072 IFL 8551

9910448141 NUT PLAIN WING IFL 8551 ILG 20072 IFL 8551

IFL 8551

• 9910448141 NUT PLAIN WING IFL 8551 ILG 20072 IFL 8551

• 9910448141 NUT PLAIN WING IFL 8551 ILG 20072 IFL 8551

PRESSURE GAUGE MT-60 YP TO DRG NO. 2B2.830.646CB-01

PRESSURE GAUGE MT-60 YP TO DRG NO. 2B2.830.646CB-01

2B2.830.646CB-01

• ATTACHED

• ATTACHED

RADIATOR WATER LH ASSY TO DRG NO. 175.31.001CB-ACB

RADIATOR WATER LH ASSY TO DRG NO. 175.31.001CB-ACB

175.31.001CB-ACB

• ATTACHED

• ATTACHED

WATER RADIATOR RH TO DRG NO. 175.31.002CB

WATER RADIATOR RH TO DRG NO. 175.31.002CB

175.31.002CB

• ATTACHED

• ATTACHED

Fabrication of Sub-Assemblies of Parachute As per OPF Drg.No. GA-14R45/ABHC(6)

As per OPF Drg.No. GA-14R45/ABHC(6)

• As per specification/drawing

• As per specification/drawing

Fabrication of Sub-Assemblies of Parachute As per OPF Drg. No. GA-16-20-1-18

As per OPF Drg. No. GA-16-20-1-18

• As per specification/drawing

• As per specification/drawing

BUTTON POLYESTER REV 19MM CAMOUFLAGE DIGITAL PRINT SPECIFICATION IS 1461-1984 2nd REV (RA 2023) Except that (i) material shall be polyester (ii) design and dimension as per drawing No OCFS/TS/BPR/19 and as per sample held with OCFS

BUTTON POLYESTER REV 19MM CAMOUFLAGE DIGITAL PRINT SPECIFICATION IS 1461-1984 2nd REV (RA 2023) Except that (i) material shall be polyester (ii) design and dimension as per drawing No OCFS/TS/BPR/19 and as per sample held with OCFS

• as per attached file

• as per attached file

CAPSULE IN CASE DRG NO. Y2829480 L.F-9023081556

CAPSULE IN CASE DRG NO. Y2829480

Y2829480

• OPTO-MECHANICAL COMPONENT

• OPTO-MECHANICAL COMPONENT

PIN DRG No SK- 6531/ TE

PIN DRG No SK- 6531/ TE

DRG No SK- 6531/ TE

• MACHINING

• 1-Chemical and mechanical properties as per std. given drawing.
• 2- Dimensional inspection, for all dimensions given in the drawing and other parameter which are mentioned in relevant drawing

SPRING DRG No SK- 6536/ TE

SPRING DRG No SK- 6536/ TE

DRG No SK- 6536/ TE

• SPRING MANUFACTURING TECH.(COILING)

• 1-Chemical and mechanical properties as per std. given drawing.
• 2- Dimensional inspection, for all dimensions given in the drawing and other parameter which are mentioned in relevant drawing

LATCH DRG No SK- 6535 /TE

LATCH DRG No SK- 6535 /TE

DRG No SK- 6535 /TE

• MACHINING

• 1-Chemical and mechanical properties as per std. given drawing.
• 2- Dimensional inspection, for all dimensions given in the drawing and other parameter which are mentioned in relevant drawing

SLIDE DRG No SK-6534/TE

SLIDE DRG No SK-6534/TE

DRG No SK-6534/TE

• MACHINING

• 1-Chemical and mechanical properties as per std. given drawing.
• 2- Dimensional inspection, for all dimensions given in the drawing and other parameter which are mentioned in relevant drawing

SPRING DRG. NO. SK-6542/TE

SPRING DRG. NO. SK-6542/TE

DRG. NO. SK-6542/TE

• Spring Manufacturing Tech. (Coilling)

• Chemical and mechanical properties as per std. given drawing.
• Dimensional inspection, for all dimensions given in the drawing and other parameter which are mentioned in relevant drawing

RETAINER Drg. No. SK-6526/TE

RETAINER Drg. No. SK-6526/TE

Drg. No. SK-6526/TE

• MACHINING

• Chemical and mechanical properties as per std. given drawing.
• Dimensional inspection, for all dimensions given in the drawing and other parameter which are mentioned in relevant drawing

SIGHT LEAF DRG No SK-6540/TE

SIGHT LEAF DRG No SK-6540/TE

SK-6540/TE

• MACHINING

• 1-Chemical and mechanical properties as per std. given drawing.
• 2- Dimensional inspection, for all dimensions given in the drawing and other parameter which are mentioned in relevant drawing.

Fabrication of Sub-Assemblies of Parachute As per OPF Drg No GA 16 20 1 13

As per OPF Drg. No. GA-16-20-1-13

• AS PER SPECIFICATION/DRAWING

• AS PER SPECIFICATION/DRAWING

TORSION SHAFT OPN 10 TO 30 TO DRG NO 172.45.344/SMF

GOST 4543-71

172.45.344/SMF

• AS PER VQC

• AS PER QAP

SUN GEAR OF 1ST PLANETARY GEAR SET OPN 10 TO 30 SEMI MACHINED FORGING TO DRG NO 172 40 304 -1 SMF

GOST 4543-71

172.40.304 -1/SMF

• AS PER VQC

• AS PER QAP

CROWN GEAR OF THIRD PLANETARY GEAR SET TO DRG. NO. 172.40.310/F

GOST 4543-71

172.40.310/F

• AS PER VQC

• AS PER QAP

CONVERSION OF FUZE HOLDER TO OFAJ DRG NO. FS 3025 INTO FUZE HOLDER ASSY TO OFAJ DRAWING NO. FS-3027 BY VULCANIZATION

CONVERSION OF FUZE HOLDER TO OFAJ DRG NO. FS 3025 INTO FUZE HOLDER ASSY TO OFAJ DRAWING NO. FS-3027 BY VULCANIZATION

• AS PER QMI

• AS PER PQ

synthetic hook & loop fastener various sizes and colours specification IS 8156 2014 3rd REV except that the peel strength shall be 250g/cm min and sheer strength 900 g/cm2 min pantone shade No 19 5917 TCX green with best trade quality

synthetic hook & loop fastener various sizes and colours specification IS 8156 2014 3rd REV except that the peel strength shall be 250g/cm min and sheer strength 900 g/cm2 min pantone shade No 19 5917 TCX green with best trade quality

• as per attached file

• as per attached file

TAPE ELASTIC 22 MM WIDE PANTONE SHADE No 19 5513 TPX OLIVE GREEN SPECIFICATION No IS: 9686-1980 AMENDMENT No 1 REAFFIRMED 2012 THICKNESS 0.76 mm AT 10KPa WHEN TESTED TO IS 7702 AND BREAKING STRENGTH 278N/20point5 mm WHEN TESTED TO IS 1969

TAPE ELASTIC 22 MM WIDE PANTONE SHADE No 19 5513 TPX OLIVE GREEN SPECIFICATION No IS: 9686-1980 AMENDMENT No 1 REAFFIRMED 2012 THICKNESS 0.76 mm AT 10KPa WHEN TESTED TO IS 7702 AND BREAKING STRENGTH 278N/20point5 mm WHEN TESTED TO IS 1969

• as per attached file

• as per attached file

Synthetic tape 12 mm pantone shade No 19 5917 TCX green Specification 0.46 mm min thick at 10 Kpa pressure when tested to IS 7702 and Breaking Strength 507 N/10.5 mm when tested to IS 1969 with best trade quality

Synthetic tape 12 mm pantone shade No 19 5917 TCX green Specification 0.46 mm min thick at 10 Kpa pressure when tested to IS 7702 and Breaking Strength 507 N/10.5 mm when tested to IS 1969 with best trade quality

• as per attached file

• as per attached file

TAPE ELASTIC 25MM WIDE WHITE. SPECIFICATION IS: 9686-1980 AMDT No 1 REAFFIRMED 2012

TAPE ELASTIC 25MM WIDE WHITE. SPECIFICATION IS: 9686-1980 AMDT No 1 REAFFIRMED 2012

• AS PER ATTACHED FILE

• AS PER ATTACHED FILE

SPECIFICATION FOR NYLON PUSH TAB (CYLINDRICAL) DOUBLE HOLE SPRING TYPE PANTONE SHADE No 19 5917 TCX AS PER DRAWING No OCFS/TS/PSDHST AND AS PER SAMPLE HELD WITH OCFS WITH BEST TRADE QUALITY AND SPECIFICATION FOR NYLON PUSH TAB SINGLE HOLE SPRING TYPE WITH ARRANGEMENT OF PASSING OF 7mm TAPE PANTONE SHADE No 19 5917 TCX AS PER DRAWING No OCFS/TS/PSSHSTN AND AS PER SAMPLE HELD WITH OCFS WITH BEST TRADE QUALITY

SPECIFICATION FOR NYLON PUSH TAB (CYLINDRICAL) DOUBLE HOLE SPRING TYPE PANTONE SHADE No 19 5917 TCX AS PER DRAWING No OCFS/TS/PSDHST AND AS PER SAMPLE HELD WITH OCFS WITH BEST TRADE QUALITY AND SPECIFICATION FOR NYLON PUSH TAB SINGLE HOLE SPRING TYPE WITH ARRANGEMENT OF PASSING OF 7mm TAPE PANTONE SHADE No 19 5917 TCX AS PER DRAWING No OCFS/TS/PSSHSTN AND AS PER SAMPLE HELD WITH OCFS WITH BEST TRADE QUALITY

• as per attached file

• as per attached file

Appendix 'C' of Provisional specification No. S/2594/C/CCWDCP/TC-15(a) and Cuff Rib in Tubular Form for 9 cm width and knitted fabric is in open width and 2x2 durby knit for 90 cm width

Appendix 'C' of Provisional specification No. S/2594/C/CCWDCP/TC-15(a) and Cuff Rib in Tubular Form for 9 cm width and knitted fabric is in open width and 2x2 durby knit for 90 cm width

• as per attached file

• as per attached file

Appendix 'C' of Provisional specification No. S/2594/C/CCWDCP/TC-15(a) and Cuff Rib in Tubular Form for 9 cm width and knitted fabric is in open width and 2x2 durby knit for 90 cm width

Appendix 'C' of Provisional specification No. S/2594/C/CCWDCP/TC-15(a) and Cuff Rib in Tubular Form for 9 cm width and knitted fabric is in open width and 2x2 durby knit for 90 cm width

• as per attached file

• as per attached file

SEALING CAP FOR CORD MADE FROM HIGH DENSITY POLYETHYLENE. PANTONE SHADE No 19-5917 TCX As per drawing No OCFS/TS/PAT & As per sample held with OCFS, specification best trade quality.

SEALING CAP FOR CORD MADE FROM HIGH DENSITY POLYETHYLENE. PANTONE SHADE No 19-5917 TCX As per drawing No OCFS/TS/PAT & As per sample held with OCFS, specification best trade quality.

drawing No OCFS/TS/PAT

• as per attached file

• as per attached file