H.T.P.B. ( HYDROXY TERMINATED POLY BUTADIENE ) SPECIFICATION :-HEMRL/TRIM/PROP/RM/4.(REVISED).DT OF REVISION;09/01/2013.

H.T.P.B. ( HYDROXY TERMINATED POLY BUTADIENE ) SPECIFICATION :-HEMRL/TRIM/PROP/RM/4.(REVISED).DT OF REVISION;09/01/2013.

• MSME

• H.T.P.B. ( HYDROXY TERMINATED POLY BUTADIENE ) SPECIFICATION :-HEMRL/TRIM/PROP/RM/4.(REVISED).DT OF REVISION;09/01/2013.

COVER PART NO.6429713 TO OEM DRG.NO.304061235/TRD.DRG.NO. 1.2.2758

COVER PART NO.6429713 TO OEM DRG.NO.304061235/TRD.DRG.NO. 1.2.2758

COVER PART NO.6429713 TO OEM DRG.NO.304061235/TRD.DRG.NO. 1.2.2758

• attached

• attached

Brass Cup for 12.7 SRCG Ammn Case As per OFV Drawing No. V/SRCG/PROV/0002

Brass Cup for 12.7 SRCG Ammn Case As per OFV Drawing No. V/SRCG/PROV/0002

V/SRCG/PROV/0002

• Brass Foundry
• Rolling of Sheets
• Press for Blanking & Cupping
• Annealing Furnance
• Spectroscopy

• Vernier, Micrometer & Dial Indicator
• Vickers Hardness Tester
• Microscope for Grain Size Measurement

Brass Strip for 27mm X 0.9mm Thick Size: 27mm (+/-) 0.13mm Wide X 0.90mm (+/-) 0.02mm Thick To Specn. JSS 9535-02 : 2019 (Revision No. 5) Hardness: 70 - 95 V. P. N. at 10 Kg. Load To Drg. No. V12.7/PROD/052

Brass Strip for 27mm X 0.9mm Thick Size: 27mm (+/-) 0.13mm Wide X 0.90mm (+/-) 0.02mm Thick To Specn. JSS 9535-02 : 2019 (Revision No. 5) Hardness: 70 - 95 V. P. N. at 10 Kg. Load To Drg. No. V12.7/PROD/052

V12.7/PROD/052

• Brass Foundry
• Rolling of Sheets
• Press for Blanking & Cupping
• Annealing Furnace

• Spectroscopy
• Vernier, Micrometer & Dial Indicator
• Vickers Hardness Tester
• Microscope for Grain Size Measurement

Brass Strip 15 mm For 5.56 mm Primer Cup Size: 15 mm (+/-) 0.13 mm Wide X 0.69 mm (+/-) 0.013 mm Thick To Specification:- JSS: 9535-02-2019 (Revision No. 5) To Drawing No. :- V/PROD/0039-H

Brass Strip 15 mm For 5.56 mm Primer Cup Size: 15 mm (+/-) 0.13 mm Wide X 0.69 mm (+/-) 0.013 mm Thick To Specification:- JSS: 9535-02-2019 (Revision No. 5) To Drawing No. :- V/PROD/0039-H

V/PROD/0039-H

• Brass Foundry & Rolling

• Spectroscopy & Micrometer, Vernier

Brass Strip 11 mm For 5.56 mm Anvil Size: 11 mm (+/-) 0.13 mm Wide X 0.97 mm (+/-) 0.025 mm Thick To Specification:- JSS: 9535-02-2019 (Revision No. 5) To Drawing No. :- V/PROD/0038H

Brass Strip 11 mm For 5.56 mm Anvil Size: 11 mm (+/-) 0.13 mm Wide X 0.97 mm (+/-) 0.025 mm Thick To Specification:- JSS: 9535-02-2019 (Revision No. 5) To Drawing No. :- V/PROD/0038H

V/PROD/0038H

• Brass Foundry & Rolling

• Brass Foundry & Rolling

Brass Cup for 5.56 Case (For 2 Draw Process) To Drawing No.:- V5/PROD/0059-D for 5.56mm Ammunition To Specification : - JSS : 9535-02-2019 (Revision No. 5)

Brass Cup for 5.56 Case (For 2 Draw Process) To Drawing No.:- V5/PROD/0059-D for 5.56mm Ammunition To Specification : - JSS : 9535-02-2019 (Revision No. 5)

V5/PROD/0059-D

• Brass Foundry

• Spectroscopy

Brass Cup for 12.7mm Case To Drg. No. V12.7/PROD/017-F Material : Brass to Specn. JSS 9535-02-2019. (Fifth Revision)

Brass Cup for 12.7mm Case To Drg. No. V12.7/PROD/017-F Material : Brass to Specn. JSS 9535-02-2019. (Fifth Revision)

V12.7/PROD/017-F

• Brass Foundry
• Rolling of Sheets
• Press for Blanking & Cupping
• Annealing Furnance

• Spectroscopy
• Vernier, Micrometer & Dial Indicator
• Hardness Tester
• Microscope for Grain Size Measurement

AERIAL BOMB 100-120 KG.RDZ (EMPTY ASSEMBLY) TO OFAJ DRG.NO. AAIW/BS-0067 PACKED IN "PACKING FOR EMPTY AERIAL BOMB 100-120" TO OFK DRG.NO.KhPK-410026 (4 SHEETS).painted externallyTORQUOISE BLUE ISC 102 of IS-5-2007(6th Rev)to Specn IS-168-1993 DC No.3685-ME dt.19-03-2001(3rd Rev) reaffirmed 2002(as applicable for defence use)

AERIAL BOMB 100-120 KG.RDZ (EMPTY ASSEMBLY) TO OFAJ DRG.NO. AAIW/BS-0067 PACKED IN "PACKING FOR EMPTY AERIAL BOMB 100-120" TO OFK DRG.NO.KhPK-410026 (4 SHEETS).painted externallyTORQUOISE BLUE ISC 102 of IS-5-2007(6th Rev)to Specn IS-168-1993 DC No.3685-ME dt.19-03-2001(3rd Rev) reaffirmed 2002(as applicable for defence use)

AERIAL BOMB 100-120 KG.RDZ (EMPTY ASSEMBLY) TO OFAJ DRG.NO. AAIW/BS-0067 PACKED IN "PACKING FOR EMPTY AERIAL BOMB 100-120" TO OFK DRG.NO.KhPK-410026 (4 SHEETS).painted externallyTORQUOISE BLUE ISC 102 of IS-5-2007(6th Rev)to Specn IS-168-1993 DC No.3

• as per file attached

• as per file attached

AERIAL BOMB 100 - 120 KG.(EMPTY ASSEMBLY) TO OFAJ DRG NO. AAIW/BS-0067 PACKED IN"PACKING FOR EMPTY AERIAL BOMB100-120"TO OFK DRG.NO.KhPK-410026(4 SHEETS).painted externally lightgrey ISC 631 of IS-5-2007(6th Rev)to Specn IS-168-1993 DC No3685-ME dt.19-03-2001 (3rd Rev) Reaffirmed 2012.(as applicable for defence use)

AERIAL BOMB 100 - 120 KG.(EMPTY ASSEMBLY) TO OFAJ DRG NO. AAIW/BS-0067 PACKED IN"PACKING FOR EMPTY AERIAL BOMB100-120"TO OFK DRG.NO.KhPK-410026(4 SHEETS).painted externally lightgrey ISC 631 of IS-5-2007(6th Rev)to Specn IS-168-1993 DC No3685-ME dt.19-03-2001 (3rd Rev) Reaffirmed 2012.(as applicable for defence use)

AERIAL BOMB 100 - 120 KG.(EMPTY ASSEMBLY) TO OFAJ DRG NO. AAIW/BS-0067 PACKED IN"PACKING FOR EMPTY AERIAL BOMB100-120"TO OFK DRG.NO.KhPK-410026(4 SHEETS).painted externally lightgrey ISC 631 of IS-5-2007(6th Rev)to Specn IS-168-1993 DC No3685-ME dt.1

• as per file attached

• as per file attached

AERIAL BOMB 100 - 120 KG.(EMPTY ASSEMBLY) TO OFAJ DRG NO. AAIW/BS-0067 PACKED IN"PACKING FOR EMPTY AERIAL BOMB100-120"TO OFK DRG.NO.KhPK-410026(4 SHEETS).painted externally lightgrey ISC 631 of IS-5-2007(6th Rev)to Specn IS-168-1993 DC No3685-ME dt.19-03-2001 (3rd Rev) Reaffirmed 2012.(as applicable for defence use)

AERIAL BOMB 100 - 120 KG.(EMPTY ASSEMBLY) TO OFAJ DRG NO. AAIW/BS-0067 PACKED IN"PACKING FOR EMPTY AERIAL BOMB100-120"TO OFK DRG.NO.KhPK-410026(4 SHEETS).painted externally lightgrey ISC 631 of IS-5-2007(6th Rev)to Specn IS-168-1993 DC No3685-ME dt.19-03-2001 (3rd Rev) Reaffirmed 2012.(as applicable for defence use)

AERIAL BOMB 100 - 120 KG.(EMPTY ASSEMBLY) TO OFAJ DRG NO. AAIW/BS-0067 PACKED IN"PACKING FOR EMPTY AERIAL BOMB100-120"TO OFK DRG.NO.KhPK-410026(4 SHEETS).painted externally lightgrey ISC 631 of IS-5-2007(6th Rev)to Specn IS-168-1993 DC No3685-ME dt.1

• as per file attached

• as per file attached

STEEL ROD DIA-65 +/- 0.7MM,LENGTH OF 1.25 METRES OR ITS MULTIPLES AS PER SPECIFICATION IS:206 2-2011GR-E250 QUALITY-A FOR RGB-60 TUBE-B

STEEL ROD DIA-65 +/- 0.7MM,LENGTH OF 1.25 METRES OR ITS MULTIPLES AS PER SPECIFICATION IS:206 2-2011GR-E250 QUALITY-A FOR RGB-60 TUBE-B

• STEEL ROD DIA-65 +/- 0.7MM,LENGTH OF 1.25 METRES OR ITS MULTIPLES AS PER SPECIFICATION IS:206 2-2011GR-E250 QUALITY-A FOR RGB-60 TUBE-B

• STEEL ROD DIA-65 +/- 0.7MM,LENGTH OF 1.25 METRES OR ITS MULTIPLES AS PER SPECIFICATION IS:206 2-2011GR-E250 QUALITY-A FOR RGB-60 TUBE-B

Brass Strip 16 mm For 7.62 mm Primer Cup Size: 16 mm (+/-) 0.13 mm Wide X 0.69 mm (+/-) 0.013 mm Thick To Specification:- JSS: 9535-02-2019 (Revision No. 5) To Drawing No. :- V/PROD/0039-H Grain Size:- 0.040 mm to 0.070 mm

Brass Strip 16 mm For 7.62 mm Primer Cup Size: 16 mm (+/-) 0.13 mm Wide X 0.69 mm (+/-) 0.013 mm Thick To Specification:- JSS: 9535-02-2019 (Revision No. 5) To Drawing No. :- V/PROD/0039-H Grain Size:- 0.040 mm to 0.070 mm

V/PROD/0039-H

• Brass Foundry & Rolling

• Spectroscopy & Micrometer, Vernier

Brass Strip 12 mm For 7.62 mm Anvil Size: 12 mm (+/-) 0.13 mm Wide X 0.97 mm (+/-) 0.025 mm Thick To Specification:- JSS: 9535-02-2019 (Revision No. 5) To Drawing No. :- V/PROD/0038H

Brass Strip 12 mm For 7.62 mm Anvil Size: 12 mm (+/-) 0.13 mm Wide X 0.97 mm (+/-) 0.025 mm Thick To Specification:- JSS: 9535-02-2019 (Revision No. 5) To Drawing No. :- V/PROD/0038H

V/PROD/0038H

• Brass Foundry & Rolling

• Spectroscopy & Micrometer, Vernier

Brass Cup for AK-47 Case as per Drg. No. VA7/PROV/0007 Specification: JSS 9535-02-2019 (Revision No. 5)

Brass Cup for AK-47 Case as per Drg. No. VA7/PROV/0007 Specification: JSS 9535-02-2019 (Revision No. 5)

VA7/PROV/0007

• Brass Foundry
• Rolling of Brass Sheets
• Press for Blanking & Cupping
• Annealing

• Spectroscopy
• Vernier, Micrometer, Dial Indicator
• Microscope for Grain Size Measurement
• Vickers Hardness Tester

STEEL PACKAGE FOR 1000 KG GP BOMB AS PER SPECN NO. DRDO/ARDE/ADM/GP-1000/01/2023

STEEL PACKAGE FOR 1000 KG GP BOMB AS PER SPECN NO. DRDO/ARDE/ADM/GP-1000/01/2023

• TO BE UPLOADED

• TO BE UPLOADED

EMPTY CARTRIDGE CASE AND EMPTY SHELL BODY WITH PENETRATOR (TRD NO. KhRD-1/11 TRD NO. KhRD-3/4) FOR 20 MM AMR SAPHEL AMMN

EMPTY CARTRIDGE CASE AND EMPTY SHELL BODY WITH PENETRATOR (TRD NO. KhRD-1/11 TRD NO. KhRD-3/4) FOR 20 MM AMR SAPHEL AMMN

• TO BE UPLOADED

• TO BE UPLOADED

CARTRIDGE CASE AND SHELL BODY FOR 30MM ADEN AMMN. LF 9911358862

CARTRIDGE CASE AND SHELL BODY FOR 30MM ADEN AMMN. LF 9911358862

• TO BE UPLOADED

• TO BE UPLOADED

CARTRIDGE CASE AND SHELL BODY FOR 23MM SCHILKA HEIT AMMN LF 9911358863

CARTRIDGE CASE AND SHELL BODY FOR 23MM SCHILKA HEIT AMMN LF 9911358863

• TO BE UPLOADED

• TO BE UPLOADED

Brass Cup for 7.62 mm Case To Spec: MIL-C-10375 C (AR) Dt. 03-04-1991 And as per Drg. No. V/PROD/0089 Material Specification For Brass Cup to Spec: JSS 9535-02-2019 (Revision No. 5)

Brass Cup for 7.62 mm Case To Spec: MIL-C-10375 C (AR) Dt. 03-04-1991 And as per Drg. No. V/PROD/0089 Material Specification For Brass Cup to Spec: JSS 9535-02-2019 (Revision No. 5)

V/PROD/0089

• Brass Foundry
• Rolling of Brass Sheets
• Press for Blanking & Cupping
• Annealing

• Spectroscopy
• Vernier, Micrometer, Dial Indicator
• Microscope for Grain Size Measurement
• Vickers Hardness Tester

CARTRIDGE CASE AND SHELL BODY FOR 23MM SCHILKA APIT AMMN (LF-9911358864)

CARTRIDGE CASE AND SHELL BODY FOR 23MM SCHILKA APIT AMMN (LF-9911358864)

• TO BE UPLOADED

• TO BE UPLOADED

SOCKET AS PER DRAWING NUMBER TRD-2.1.3227 LF - 9911358671

SOCKET AS PER DRAWING NUMBER TRD-2.1.3227 LF - 9911358671

• TO BE UPLOADED

• TO BE UPLOADED

VPCI 146 PAPER, MAKE : CORTEC CORSHIELD OR EQUIVALENT, SIZE : 19 INCH X 16 INCH LF 1020621062

VPCI 146 PAPER, MAKE : CORTEC CORSHIELD OR EQUIVALENT, SIZE : 19 INCH X 16 INCH LF 1020621062

• TO BE UPLOADED

• TO BE UPLOADED

LEAD TUBE FOR FLSC-4.3 GM, AS PER O.F.BHANDARA SPECIFICATION NO. BF 1.50 DT 28/01/2021.

SPECIFICATION NO. BF 1.50 DT 28/01/2021.

• LEAD TUBE

• NABL LAB ORD. FY. BHANDARA

Graphite Dry Sulphur Free

As Per JSS 9620-01:2021, Rev No. 4, DC no. 6596-ME dt. 11/11/2022 Specific Grain Size 75 Micron

• As per attached document

• As per attached document

Carbamite Undyed Powder/ Flakes as per JSS-6810-125: 2020 Rev. No. 4 DC No. 6225-ME dated 02/09/2021

JSS-6810-125: 2020 Rev. No. 4 DC No. 6225-ME dated 02/09/2021

• As per attached document

• As per attached document

BORON POWDER GR-II SPECIFICATION: HEMRL/CEPP/PS/354

BORON POWDER GR-II SPECIFICATION: HEMRL/CEPP/PS/354

• BORON POWDER GR-II SPECIFICATION: HEMRL/CEPP/PS/354

• BORON POWDER GR-II SPECIFICATION: HEMRL/CEPP/PS/354

30MM BMP-II CARTRIDGE CASE EMPTY MANUFACTURED THROUGH SEMI FORGING METHOD. REF: DRG NO. BL/SK/R&D/30MM/CC/484.

30MM BMP-II CARTRIDGE CASE EMPTY MANUFACTURED THROUGH SEMI FORGING METHOD. REF: DRG NO. BL/SK/R&D/30MM/CC/484.

• FORGING FACILITY, CNC LATHE MACHINE, ELECTROPLATING (CHROMATE PASSIVATION) FACILITY, , HARDNESS TESTING , HEAT TREATMENT FACILITY OR MOU/TIE UP WITH SPECIALIZED FIRM FOR THE SAME.

• SUITABLE MEASURING FACILITY

30MM BMP-II SHELL HE/I (EMPTY) WITH DRIVING BAND MANUFACTURED THROUGH SEMI FORGING METHOD. REF: DRG NO. BL/SK/R&D/30MM/HEI/485 (02 SHEETS i.e 1/2 & 2/2)

30MM BMP-II SHELL HE/I (EMPTY) WITH DRIVING BAND MANUFACTURED THROUGH SEMI FORGING METHOD. REF: DRG NO. BL/SK/R&D/30MM/HEI/485 (02 SHEETS i.e 1/2 & 2/2)

• FORGING FACILITY, CNC LATHE MACHINE, GRINDING FACILITY, KNURLING FACILITY, PHOSPHATING FACILITY OR MOU/TIE UP WITH SPECIALIZED FIRM DOING PHOSPHATING, HARDNESS TESTING FACILITY, HEAT TREATMENT FACILITY OR MOU/TIE UP WITH SPECIALIZED FIRM FOR THE SAME, BAND PRESSING FACILITY

• SUITABLE MEASURING FACILITY

AERIAL BOMB 100 - 120 KG.(EMPTY ASSEMBLY) TO OFAJ DRG NO. AAIW/BS-0067 PACKED INSTEEL PACKING FOR EMPTY AERIAL BOMB 100-120 TO DRG.NO.OFBH/SP/C/2235C (3 SHEETS) PAINTED EXTERNALLYBLACK MATT FINISH OF IS-5-2007 (6TH REV) (REAFFIRMED 2017) (9911358852)

AERIAL BOMB 100 - 120 KG.(EMPTY ASSEMBLY) TO OFAJ DRG NO. AAIW/BS-0067 PACKED INSTEEL PACKING FOR EMPTY AERIAL BOMB 100-120 TO DRG.NO.OFBH/SP/C/2235C (3 SHEETS) PAINTED EXTERNALLYBLACK MATT FINISH OF IS-5-2007 (6TH REV) (REAFFIRMED 2017) (9911358852)

• TO BE UPLOADED

• TO BE UPLOADED

PAPER LAMINATED GR-III,0.65 TO 0.73 MM X THICK 91.44CMS WIDEIN ROLL TO SPECN:-IND/ME/786(d):2013 DC NO-5261-MEDT.24/06/2014.

PAPER LAMINATED GR-III,0.65 TO 0.73 MM X THICK 91.44CMS WIDEIN ROLL TO SPECN:-IND/ME/786(d):2013 DC NO-5261-MEDT.24/06/2014.

• as per file attached

• as per file attached

SET OF FOLLOWING 6 COMPONENTS FOR ARMING DEVICE FOR 84MM 551(1)HOUSING TRD NO.1-2-2191 (2)CONTACT SLEEVE TRD NO.1-2-2192(3)CONTACT PIECE RETAINER TRD NO.1-2-2194 (4) CONTACT SLEEVEINSULATOR TRD NO.1-2-2199 (5) PROTECTIVE COVER TRD NO.2-2-2197 & (6) ISOLATOR TRD NO.2-2-2202.

SET OF FOLLOWING 6 COMPONENTS FOR ARMING DEVICE FOR 84MM 551(1)HOUSING TRD NO.1-2-2191 (2)CONTACT SLEEVE TRD NO.1-2-2192(3)CONTACT PIECE RETAINER TRD NO.1-2-2194 (4) CONTACT SLEEVEINSULATOR TRD NO.1-2-2199 (5) PROTECTIVE COVER TRD NO.2-2-2197 & (6) ISOLATOR TRD NO.2-2-2202.

• as per file attached

• as per file attached

SET OF 4 SPRINGS CONSISTING OF ONE NO. EACH FOR 84MM HEAT 551 DETIALS AS PER ENCLOSER

SET OF 4 SPRINGS CONSISTING OF ONE NO. EACH FOR 84MM HEAT 551 DETIALS AS PER ENCLOSER

SET OF 4 SPRINGS CONSISTING OF ONE NO. EACH FOR 84MM HEAT 551 DETIALS AS PER ENCLOSER

• as per file attached

• as per file attached

(ROTOR, ROTOR HOUSING, HEXAGON SOCKET SET SCREW WITH CONE M2.5 X 4 AND PROTECTIVE SHEET METAL)

FOR ARMING DEVICE FOR 84 MM HEAT-551 (LF: 9911358839)

• To be uploaded

• To be uploaded

STOP SCREW ASSEMBLY, PART NO. 01182440 TO OEM DRG NO. 305017786/TRD NO.1.2.2222 (9911358848)

STOP SCREW ASSEMBLY, PART NO. 01182440 TO OEM DRG NO. 305017786/TRD NO.1.2.2222 (9911358848)

• Will be uploaded

• Will be uploaded

AMMN. CONT. BOX C-43A (OG) FOR AMMN. CONT. ASSY 146A TO DRG. NO. CQA (A)/AMN/2608. PT. NO. ISV 529A DC-37249-A DT. 08/03/10. (WITHOUT FITMENT)

AMMN. CONT. BOX C-43A (OG) FOR AMMN. CONT. ASSY 146A TO DRG. NO. CQA (A)/AMN/2608. PT. NO. ISV 529A DC-37249-A DT. 08/03/10. (WITHOUT FITMENT)

• AS PER DRAWING AND SPECIFICATION FOR THE ITEM "AMMN. CONT. BOX C-43A (OG) FOR AMMN. CONT. ASSY 146A TO DRG. NO. CQA (A)/AMN/2608. PT. NO. ISV 529A DC-37249-A DT. 08/03/10. (WITHOUT FITMENT)"

• AS PER DRAWING AND SPECIFICATION FOR THE ITEM "AMMN. CONT. BOX C-43A (OG) FOR AMMN. CONT. ASSY 146A TO DRG. NO. CQA (A)/AMN/2608. PT. NO. ISV 529A DC-37249-A DT. 08/03/10. (WITHOUT FITMENT)"

AMMN. CONT. BOX C-43A (OG) FOR AMMN. CONT. ASSY 146A TO DRG. NO. CQA (A)/AMN/2608. PT. NO. ISV 529A DC-37249-A DT. 08/03/10. (WITHOUT FITMENT)

AMMN. CONT. BOX C-43A (OG) FOR AMMN. CONT. ASSY 146A TO DRG. NO. CQA (A)/AMN/2608. PT. NO. ISV 529A DC-37249-A DT. 08/03/10. (WITHOUT FITMENT)

• AS PER DRAWING AND SPECIFICATION FOR THE ITEM "AMMN. CONT. BOX C-43A (OG) FOR AMMN. CONT. ASSY 146A TO DRG. NO. CQA (A)/AMN/2608. PT. NO. ISV 529A DC-37249-A DT. 08/03/10. (WITHOUT FITMENT)"

• AS PER DRAWING AND SPECIFICATION FOR THE ITEM "AMMN. CONT. BOX C-43A (OG) FOR AMMN. CONT. ASSY 146A TO DRG. NO. CQA (A)/AMN/2608. PT. NO. ISV 529A DC-37249-A DT. 08/03/10. (WITHOUT FITMENT)"

WASHER(80/20 TIN ZINC ALLOY) O.D.12.7 MM ,I.D.9.52 MM AND THICKNESS 0.508 MM. Note:- WASHER (80/20 TIN ZINC ALLOY) O.D. 12.7 MM, I.D. 9.52 MM AND THICKNESS 0.508 MM. NOTE: TIN ZINC ALLOY STRIP SOFT 80/20 SHOULD BE SUBJECTED TO CLOSE BEND TEST. THE TEMPERATURE OF THE TEST PIECE DURING BEND TEST SHOULD NOT EXCEED -2 DEG. CENTIGRADE DRG. NO.OFDR/MF-6/R5

WASHER(80/20 TIN ZINC ALLOY) O.D.12.7 MM ,I.D.9.52 MM AND THICKNESS 0.508 MM.

• AS PER DRAWING AND SPECIFICATION

• AS PER DRAWING AND SPECIFICATION

BASE CAP TO DRG.NO.04-749-130224-01. 4E,DC-36669-A DATED 19-04-2000 SPECIFICATION NO 04-749-0021-0002(Plastic granuleshigh density polyethylene)

BASE CAP TO DRG.NO.04-749-130224-01. 4E,DC-36669-A DATED 19-04-2000 SPECIFICATION NO 04-749-0021-0002(Plastic granuleshigh density polyethylene)

• AS PER DRAWING AND SPECIFICATION

• AS PER DRAWING AND SPECIFICATION

Neoprene Rubber Sheet

(1) Tensile Strength: 4500 KN/SQ. MTR. MIN (2) Elongation: 100% Min. (3) Thickness: 1.5 MM + 0.5 MM (4) Physical Appearance: Black Colour (5) Dimensions of one sheet, length: 1215 MM Â ± 5 & Width:375 to 380 MM (6) Material shall consist of essentially of Neoprene Rubber in the form of a wax-free, both side matt (for proper bonding/adhesion) with no stretch marks. Note: Dimensions strictly uniform

• As per attached document

• As per attached document

LEAD JACKET FOR 12.7MM API BULLET DRG NO V12.7/PROD/003

LEAD JACKET FOR 12.7MM API BULLET DRG NO V12.7/PROD/003

V12.7/PROD/003

• Forming and Drawing

• As per inspection document

LINK CARTG. METALLIC BELT 7.62MM M13

TO DRG. NO. F-7268389, DC NO. 36977-A DTD. 24-08-2004 & TO SPECN. :- (I) CIA 4204(b) DC NO. 36977-A DTD. 24-08-2004 (II) JSS : 0465-01-1994 (REVISION NO. 1) NOTE :- MATERIAL TO BE PACKED AS PER 85 A/L TO DRG. NO. ISV 266 GA WHICH CONSIST OF CWP 14A, CARTON 11 A/L AND CARTON 12A

F-7268389, DC NO. 36977-A DTD. 24-08-2004

• Press Work

• As per QMI document

BIMETAL CUP AS PER OFV SPECIFICATION OFV/12.7 mm BULLET ENVELOP/BIMETAL CUP Rev. No. 4 AS PER DRAWING V12.7/PROD/057 E BIMETAL CUP IN ANNEALED AND WASHED CONDITION

BIMETAL CUP AS PER OFV SPECIFICATION OFV/12.7 mm BULLET ENVELOP/BIMETAL CUP Rev. No. 4 AS PER DRAWING V12.7/PROD/057 E BIMETAL CUP IN ANNEALED AND WASHED CONDITION

V12.7/PROD/057 E

• CUPING AND DRAWING

• AS PER OFV SPECIFICATION OFV/12.7 mm BULLET ENVELOP/BIMETAL CUP Rev. No. 4

TAIL UNIT ASSY FOR 1000 KG GP BOMB AS PER DRG NO. 2308 00 06 00 00 000 00DA (9911358871)

TAIL UNIT ASSY FOR 1000 KG GP BOMB AS PER DRG NO. 2308 00 06 00 00 000 00DA (9911358871)

• TO BE UPLOADED

• TO BE UPLOADED

SET OF 3 COMPONENTS FOR IGNITER PINAKA MK-I (ENHANCED)

SET OF 3 COMPONENTS FOR IGNITER PINAKA MK-I (ENHANCED)

SET OF 3 COMPONENTS FOR IGNITER PINAKA MK-I (ENHANCED) DRG.NO.HEMRL/IGN/ALPHA/2022/01 (1) CAP & RIM ASSY. DET NO.1 (2) 'O' RING DET NO.9 (3) PROTECTIVE CAP DET NO.10

• SET OF 3 COMPONENTS FOR IGNITER PINAKA MK-I (ENHANCED) DRG.NO.HEMRL/IGN/ALPHA/2022/01 (1) CAP & RIM ASSY. DET NO.1 (2) 'O' RING DET NO.9 (3) PROTECTIVE CAP DET NO.10

• SET OF 3 COMPONENTS FOR IGNITER PINAKA MK-I (ENHANCED) DRG.NO.HEMRL/IGN/ALPHA/2022/01 (1) CAP & RIM ASSY. DET NO.1 (2) 'O' RING DET NO.9 (3) PROTECTIVE CAP DET NO.10

SET OF 7 COMPONENTS FOR IGNITER PINAKA MK-I (ENHANCED) DRG.NO.HEMRL/IGN/ALPHA/2022/01 (1) CUP DET NO.2 (2) LID DET NO.3 (3) AL TUBE DET NO.4 (4) NUT-DET NO.5 (5) RUBBER GASKET 1 DET.NO.6 (6) RUBBER GASKET 2 DET NO.7 (7) RUBBER GASKET 3 DET NO.8

SET OF 7 COMPONENTS FOR IGNITER PINAKA MK-I (ENHANCED) DRG.NO.HEMRL/IGN/ALPHA/2022/01 (1) CUP DET NO.2 (2) LID DET NO.3 (3) AL TUBE DET NO.4 (4) NUT-DET NO.5 (5) RUBBER GASKET 1 DET.NO.6 (6) RUBBER GASKET 2 DET NO.7 (7) RUBBER GASKET 3 DET NO.8

• as per drawing attched

• as per drawing

(1) HOUSING TRD NO.-1-2-2191 (2) CONTACT SLEEVE TRD NO.-1-2-2192 (3) CONTACT PIECE RETAINER TRD NO. -1-2-2194 (4) CONTACT SLEEVE INSULATOR TRD NO.-1-2-2199 (5) PROTECTIVE COVER TRD NO.-2-2-2197 & (6) ISOLATOR TRD NO.-2-2-2202

SET OF 6 COMPONENTS FOR ARMING DEVICE FOR 84MM 551 (1) HOUSING TRD NO.-1-2-2191 (2) CONTACT SLEEVE TRD NO.-1-2-2192 (3) CONTACT PIECE RETAINER TRD NO. -1-2-2194 (4) CONTACT SLEEVE INSULATOR TRD NO.-1-2-2199 (5) PROTECTIVE COVER TRD NO.-2-2-2197 & (6) ISOLATOR TRD NO.-2-2-2202

• To be uploaded

• To be uploaded

LEAD PIG GRADE PB 99.97% TO SPECN. IS: 27-1992 (FOURTH REV.) (REAFFIRMED 2019) WITH A. NO. 1

LEAD PIG GRADE PB 99.97% TO SPECN. IS: 27-1992 (FOURTH REV.) (REAFFIRMED 2019) WITH A. NO. 1

• Metallurgical Process and Casting

• As per IS: 27-1992 (FOURTH REV.) (REAFFIRMED 2019)

STEEL INSERT FOR 12.7MM API BULLET DRG. NO. V12.7/PROD/004C

STEEL INSERT FOR 12.7MM API BULLET DRG. NO. V12.7/PROD/004 C

DRG. NO. V12.7/PROD/004 C

• MACHINING
• HEAT TREATMENT

• AS PER QMI

CARTG CASE DIA 75+0.22 MM H-12 TO DRG. NO. F-1301-135341-B DC NO.37467-A DT. 27/12/2017 TO SPECN NO. F-1301-915710CCQA(A) -0307 (C) DC(I) -35810-A DT 19/9/94 (9911333509)

CARTG CASE DIA 75+0.22 MM H-12 TO DRG. NO. F-1301-135341-B DC NO.37467-A DT. 27/12/2017 TO SPECN NO. F-1301-915710CCQA(A) -0307 (C) DC(I) -35810-A DT 19/9/94 (9911333509)

• TO BE UPLOADED

• TO BE UPLOADED

GP 1000 BOMB ASSY (EMPTY) FORGING AS PER DRG NO. 2308 00 03 00 01 000 00DA

GP 1000 BOMB ASSY (EMPTY) FORGING AS PER DRG NO. 2308 00 03 00 01 000 00DA

• TO BE UPLOADED

• TO BE UPLOADED

GP 1000 BOMB ASSY (EMPTY) CASTING AS PER DRG NO. 2308 00 01 0 01 000 00DA

GP 1000 BOMB ASSY (EMPTY) CASTING AS PER DRG NO. 2308 00 01 0 01 000 00DA

• TO BE UPLOADED

• TO BE UPLOADED

APPCP CARTON NO 1 As per Drg. No. VA7/PROV/0243 C (EARLIER NAME WAS BOX WITH HINGES)

APPCP CARTON NO 1 As per Drg. No. VA7/PROV/0243 C (EARLIER NAME WAS BOX WITH HINGES)

Drg. No. VA7/PROV/0243 C

• Plastic Moulding

• As per OFV/APPCP Cartons/Pkg dated 26-10-2023

POLYETHYLENE LAY FLAT TUBES 120.65 (4-3/4 ) WIDE X 0.178 MM THICK LOW DENSITY TYPE-I TO SPECN:-JSS-9330-03-2019(REVISIONNO.4). LF-1005792677

POLYETHYLENE LAY FLAT TUBES 120.65 (4-3/4 ) WIDE X 0.178 MM THICK LOW DENSITY TYPE-I TO SPECN:-JSS-9330-03-2019(REVISIONNO.4). LF-1005792677

• TO BE UPLOADED

• TO BE UPLOADED

TAPE ADHESIVE WATER PROOF FABRIC 12.7 +/-0.5 MM WIDE IN ROLLTO SPECN : IND/ME/790(b)2013 DC NO. 5266-ME DATE 24/06/2014.

TAPE ADHESIVE WATER PROOF FABRIC 12.7 +/-0.5 MM WIDE IN ROLLTO SPECN : IND/ME/790(b)2013 DC NO. 5266-ME DATE 24/06/2014.

TAPE ADHESIVE WATER PROOF FABRIC 12.7 +/-0.5 MM WIDE IN ROLLTO SPECN : IND/ME/790(b)2013 DC NO. 5266-ME DATE 24/06/2014.

• uploaded soon

• uploaded soon

TRANSIT PLUG AS PER DRAWING NO.M-1-2-5683 (LF 9911358757)

TRANSIT PLUG AS PER DRAWING NO.M-1-2-5683 (LF 9911358757)

• TO BE UPLOADED

• TO BE UPLOADED

POLYTHENE BAG 6X2 1/4X600 GAUGE 150 MICRONS (LF 2103051571)

POLYTHENE BAG 6X2 1/4X600 GAUGE 150 MICRONS (LF 2103051571)

• TO BE UPLOADED

• TO BE UPLOADED

EXPANDED CROSS LINKED POLYETHYLENE FOAM SHEET TO SPECIFICATION NO. IND/ME/1023 DT.27/04/13. AS PER HEMRL DRG. NO. HEMRL/EDS/AERA/T-90/DRG/006/1, 2, 3 & 4. EACH SET CONSIST OF SIZES 1) 585 x 220 x 35 – 2 NOS./SET 2) 585 x 230 x 42.5 MM – 2 NOS./SET 3) 230 x 135 x 20 MM – 7 NOS. 4) 245 x 125 x 1.5 MM – 26 NOS./SET

EXPANDED CROSS LINKED POLYETHYLENE FOAM SHEET TO SPECIFICATION NO. IND/ME/1023 DT.27/04/13. AS PER HEMRL DRG. NO. HEMRL/EDS/AERA/T-90/DRG/006/1, 2, 3 & 4. EACH SET CONSIST OF SIZES 1) 585 x 220 x 35 – 2 NOS./SET 2) 585 x 230 x 42.5 MM – 2 NOS./SET 3) 230 x 135 x 20 MM – 7 NOS. 4) 245 x 125 x 1.5 MM – 26 NOS./SET

AS PER HEMRL DRG. NO. HEMRL/EDS/AERA/T-90/DRG/006/1, 2, 3 & 4.

• MSME

• NABL Lab

CASE FOR CARTG 38 MM (RED/GREEN/YELLOW) METALLIC TO DRG. NO. OFDR/CARTG/38MM

CASE FOR CARTG 38 MM (RED/GREEN/YELLOW) METALLIC TO DRG. NO. OFDR/CARTG/38MM

CASE FOR CARTG 38 MM (RED/GREEN/YELLOW) METALLIC TO DRG. NO. OFDR/CARTG/38MM

• CASE FOR CARTG 38 MM (RED/GREEN/YELLOW) METALLIC TO DRG. NO. OFDR/CARTG/38MM
• CASE FOR CARTG 38 MM (RED/GREEN/YELLOW) METALLIC TO DRG. NO. OFDR/CARTG/38MM
• CASE FOR CARTG 38 MM (RED/GREEN/YELLOW) METALLIC TO DRG. NO. OFDR/CARTG/38MM
• CASE FOR CARTG 38 MM (RED/GREEN/YELLOW) METALLIC TO DRG. NO. OFDR/CARTG/38MM
• CASE FOR CARTG 38 MM (RED/GREEN/YELLOW) METALLIC TO DRG. NO. OFDR/CARTG/38MM

• as per drawing and specification

EXPL LABEL 1.4S FOR MMHG MK1 AS PER DRG.NO.LABEL IA-1011 (1 SET CONTAINS 1.4S SIZE 5CM QTY.-4 NOS. 1.4S SIZE 3CM QTY.- 1NO.)

EXPL LABEL 1.4S FOR MMHG MK1 AS PER DRG.NO.LABEL IA-1011 (1 SET CONTAINS 1.4S SIZE 5CM QTY.-4 NOS. 1.4S SIZE 3CM QTY.- 1NO.)

• TO BE UPLOADED

• TO BE UPLOADED

EXPLOSIVE LABEL 1.1 D FOR MMHG MK1, AS PER DRG. NO. LABEL IA 1005 (1 SET CONTAINS 4 NOS. OF LABEL 1.1 D SIZE 5 CM AND 1 NOS. OF LABEL 1.1 D SIZE 3 CM)

EXPLOSIVE LABEL 1.1 D FOR MMHG MK1, AS PER DRG. NO. LABEL IA 1005 (1 SET CONTAINS 4 NOS. OF LABEL 1.1 D SIZE 5 CM AND 1 NOS. OF LABEL 1.1 D SIZE 3 CM)

• TO BE UPLOADED

• TO BE UPLOADED

HIGH SPEED LOW DRAG, 450 KG MC/HE, A/C BOMB (EMPTY ASSEMBLY) TO DRG. NO. ARDE-2122 (ISSUE-1) DETAIL-1 R. NO. 1 DT.21-08-2020 (LF: 9911358717)

HIGH SPEED LOW DRAG, 450 KG MC/HE, A/C BOMB (EMPTY ASSEMBLY) TO DRG. NO. ARDE-2122 (ISSUE-1) DETAIL-1 R. NO. 1 DT.21-08-2020 (LF: 9911358717)

• TO BE UPLOADED

• TO BE UPLOADED

CARD BOARD CORRUGATED BOX FOR CARTG.CASE 40MM L70 PACKING

CARD BOARD CORRUGATED BOX FOR CARTG.CASE 40MM L70 PACKING

• TO BE UPLOADED

• TO BE UPLOADED

COLLAPSIBLE STEEL PALLET WITH 12 NOS OF BOX M41A (STEEL) AS PER SPECIFICATION NO: OFBL/1/MINE 4D ND/PACKING/2024(REV-1), DATE: 14.12.2024 OR LATEST REVISION.

AS PER SPECIFICATION NO: OFBL/1/MINE 4D ND/PACKING/2024(REV-1), DATE: 14.12.2024 OR LATEST REVISION.

• 1.Shearing and Notching M/C 2.Suitable Press M/C for bending, forming, Embossing/Engraving operation 3.Drilling M/C 4.Arc/Gas Welding M/C 5.Spot Welding M/C 6.Phosphating Facility 7.Spray Painting facility 8.Suitable measuring facility
• Desirable: Robotic welding machine

• Suitable Measuring Facility

7TH SET OF 03 ITEMS FOR MMHG CONSIST OF FOLLOWING ITEMS 1. CAP DRG. NO TRBL/MMG-H/MK-1/037/R0, 2. FUZE BODY ASSY (EMPTY) DRG. NO. TRBL/MMG-H/MK-1/034/R1, 3. MAGAZINE HOLDER DRG. NO. TRBL/MMG-H/MK-1/040/R1

7TH SET OF 03 ITEMS FOR MMHG CONSIST OF FOLLOWING ITEMS 1. CAP DRG. NO TRBL/MMG-H/MK-1/037/R0, 2. FUZE BODY ASSY (EMPTY) DRG. NO. TRBL/MMG-H/MK-1/034/R1, 3. MAGAZINE HOLDER DRG. NO. TRBL/MMG-H/MK-1/040/R1

• TO BE UPLOADED

• TO BE UPLOADED

EXTRUDED AL.PROFILE FOR 125MM FSAPDS AMK-339 DRIVING RING AS PER DRAWING NO: O DRG 125 1 005 O, LATEST TECHNICAL SPECIFICATION & MONITORING INSTRUCTION FOR INSPECTION ENCLOSED. (L.F. No.0126700099)

Technical Specification No. HEPF/QA/AMK/SPEC /002 Rev. No.00 Date of Issue 11-09-2024 Monitoring Instruction for Inspection No. HEPF/QA/SC/AMK/010, Issue No.01, Rev. No.00 Date of Issue 06-12-2024

NO: O DRG 125 1 005 O,

• AS PER DRAWING NO: O DRG 125 1 005 O, LATEST TECHNICAL SPECIFICATION & MONITORING INSTRUCTION FOR INSPECTION ENCLOSED.

• AS PER DRAWING NO: O DRG 125 1 005 O, LATEST TECHNICAL SPECIFICATION & MONITORING INSTRUCTION FOR INSPECTION ENCLOSED.

SET OF 51 COMPONENTS FOR FUZE K3M (DETAILS OF 51 COMPONENTS ATTACHED AS ANNEXURE-A) (LF: 9911358865)

SET OF 51 COMPONENTS FOR FUZE K3M (DETAILS OF 51 COMPONENTS ATTACHED AS ANNEXURE-A) (LF: 9911358865)

• TO BE UPLOADED

• TO BE UPLOADED

STEEL FORGING AMK-339 STABILIZER AS PER DRAWING NO O STB 125 1 005 0 AS PER LATEST TECHNICAL SPECIFICATION AND MONITORING INSTRUCTION FOR INSPECTION

AS PER ATTACHED SPECIFICATION

DRAWING NO O STB 125 1 005 0

• AS PER LATEST TECHNICAL SPECIFICATION AND MONITORING INSTRUCTION FOR INSPECTION

• AS PER DRAWING NO O STB 125 1 005 0 AS PER LATEST TECHNICAL SPECIFICATION AND MONITORING INSTRUCTION FOR INSPECTION

BOMB A/C PRACTICE SMOKE & FLASH 25 LBS NO.1 MK-1 AIR COMPLETE WITH TAIL UNIT EMPTY

TO SPECN: DTD & P (AIR) / ARM-57 (LF: 6040600100)

TO DRG NO ARM-1099 C1 R.NO.6DT 25/05/88 AMENDED VIDE AL NO. 605

• 1. Casting facility (For Bomb body) 2. Machining facility (CNC/ Lathe machine for bomb body) 3. Fabrication facility (for tail unit) 4. Forging facility (for LUG) 5. Riveting facility 6. Swaging facility 7. Soldering facility 8. Heat treatment facility 9. Grooving facility 10. Pressure testing 11. De-greasing facility 12. Spot Welding facility 13. Load test facility 14. Hydraulic leak test facility 15. Marking & painting facility 16.Stenciling facility 17. Stress relieving facility 18. Facility for chemical analysis of molten metal 19. Facility for checking CG and weight of body 20. Shot blasting facility 21. Metal spraying facility(zinc coating) 22. Mechanical test facility 23. Magnetic crack detection facility 24. Other relevant Inspection & testing facility

• 1. Casting facility (For Bomb body) 2. Machining facility (CNC/ Lathe machine for bomb body) 3. Fabrication facility (for tail unit) 4. Forging facility (for LUG) 5. Riveting facility 6. Swaging facility 7. Soldering facility 8. Heat treatment facility 9. Grooving facility 10. Pressure testing 11. De-greasing facility 12. Spot Welding facility 13. Load test facility 14. Hydraulic leak test facility 15. Marking & painting facility 16.Stenciling facility 17. Stress relieving facility 18. Facility for chemical analysis of molten metal 19. Facility for checking CG and weight of body 20. Shot blasting facility 21. Metal spraying facility(zinc coating) 22. Mechanical test facility 23. Magnetic crack detection facility 24. Other relevant Inspection & testing facility

(ROTOR, ROTOR HOUSING, HEXAGON SOCKET SET SCREW WITH CONE M2.5 X 4 AND PROTECTIVE SHEET METAL)

FOR ARMING DEVICE FOR 84 MM HEAT-551 (LF: 9911358839)

• To be uploaded

• To be uploaded

STOP SCREW ASSEMBLY, PART NO. 01182440 TO OEM DRG NO. 305017786/TRD NO.1.2.2222 (9911358848)

STOP SCREW ASSEMBLY, PART NO. 01182440 TO OEM DRG NO. 305017786/TRD NO.1.2.2222 (9911358848)

• Will be uploaded

• Will be uploaded

BRASS CUP DRG.KH-2003 FOR 40MM/L70 (LF-6071100210)

CUP(MODIFIDE) BRASS FULLY ANNEALED TO DRG. NO. Kh-2003 H TO SPECN:-JSS-9535-02:2019(REV. NO.5).(CONCESSION IN WALL THICKNESS VARIATION UP TO 0.25 MM ACCEPTED).

• TO BE UPLOADED

• TO BE UPLOADED

NICKEL POWDER AS PER SPECIFICATION CQAM 58

CQAM 58

• AS PER ATTACHED DOCUMENT

• AS PER ATTACHED MONITORING INSTRUCTION FOR INSPECTION

BODY ASSY4-26941-0605 DRG NO 4-26941-060C5

4-26941-0605 DRG NO 4-26941-060C5

• AS PER DRAWING

• AS PER DRAWING

2-NITRODIPHENYL AMINE AS PER

2-Nitro Di-Phenyl Amine as per attached specification MIL-N-3399B Date:14.05.1962 or IND/ME/877:2015, DC-5401-ME Date:01.02.2016

• MSME

• NABL LAB

CORRUGATED CARTON BOX FOR 125MM FSAPDS AMK-339 AS PER DRG. NO.H OMA 125 1 129 1

CORRUGATED CARTON BOX FOR 125MM FSAPDS AS PER DRG. NO.H OMA 125 1 129 1

• AS PER THE ATTACHED DRAWING (CORRUGATED CARTON BOX FOR 125MM FSAPDS AMK-339 AS PER DRG. NO.H OMA 125 1 129 1)

• CORRUGATED CARTON BOX FOR 125MM FSAPDS AMK-339 AS PER DRG. NO.H OMA 125 1 129 1

PLUNGER (MACHINED) TO DRG NO. 5209566 FOR 84 MM HEAT-551 (LF: 9911358845)

PLUNGER (MACHINED) TO DRG NO. 5209566 FOR 84 MM HEAT-551 (LF: 9911358845)

• ATTACHED

• ATTACHED

PLASTIC CONTAINER FOR PACKING FOR 120 MM PROOF SHOT BODY MK II

1) MI No. HAPP/QA/SC/P/003, Issue No. 01, Rev. No. 01, Date of issue 10/06/2024. 2) Specification: JSG 0102 Part II 3) Specification: JSS 9330-03:2014 Rev 3

Drawing No. H OMA 120 2 145 Rev. 1.

• AS PER ATTACHED DRAWING AND SPECIFICATION

• AS PER ATTACHED DRAWING AND SPECIFICATION

PACKING BOX FOR FLSC-4, AS PER DRG. NO. HEMRL DRG HE/CAST/081-SHT NO.1, SHT NO.2. HEMRL DRG HE/CAST/081-DET NO.1, DET NO.2, DET NO.3, DET NO.4, DET NO.5, DET NO.6, DET NO.7, DET NO.8 & DET NO.9.

PACKING BOX FOR FLSC-4, AS PER DRG. NO. HEMRL DRG HE/CAST/081-SHT NO.1, SHT NO.2. HEMRL DRG HE/CAST/081-DET NO.1, DET NO.2, DET NO.3, DET NO.4, DET NO.5, DET NO.6, DET NO.7, DET NO.8 & DET NO.9.

• MSME

• PACKING BOX FOR FLSC-4, AS PER DRG. NO. HEMRL DRG HE/CAST/081-SHT NO.1, SHT NO.2. HEMRL DRG HE/CAST/081-DET NO.1, DET NO.2, DET NO.3, DET NO.4, DET NO.5, DET NO.6, DET NO.7, DET NO.8 & DET NO.9.

PACKING BOX FOR CLC-3 AS PER HEMRL DRG HE/CAST 091 SHT NO.-1 .SHT NO.2,HEMRL DRG HE/CAST 089 DET NO.1,DET NO.2,DET NO.3, DET NO.4,HEMRL DRG HE/CAST 091 DET NO.1,DET NO.2,HEMRL DRG HE/CAST 089 DET NO.7, DET NO.8,DET NO.9.

PACKING BOX FOR CLC-3 AS PER HEMRL DRG HE/CAST 091 SHT NO.-1 .SHT NO.2,HEMRL DRG HE/CAST 089 DET NO.1,DET NO.2,DET NO.3, DET NO.4,HEMRL DRG HE/CAST 091 DET NO.1,DET NO.2,HEMRL DRG HE/CAST 089 DET NO.7, DET NO.8,DET NO.9.

DRG HE/CAST 091 DET NO.1,DET NO.2,HEMRL DRG HE/CAST 089 DET NO.7, DET NO.8,DET NO.9.

• MSME

• PACKING BOX FOR CLC-3 AS PER HEMRL DRG HE/CAST 091 SHT NO.-1 .SHT NO.2,HEMRL DRG HE/CAST 089 DET NO.1,DET NO.2,DET NO.3, DET NO.4,HEMRL DRG HE/CAST 091 DET NO.1,DET NO.2,HEMRL DRG HE/CAST 089 DET NO.7, DET NO.8,DET NO.9.