6206209018 GEAR 172 26 016 1

6206209018 GEAR 172 26 016 1

172.26.016-1

• AS PER VQC

• AS PER QAP

6206851038 GEAR 172 25 092

6206851038 GEAR 172 25 092

172.25.092

• AS PER VQC

• AS PER QAP

POLYESTER KNITTED FABRIC ONE SIDE SINGLE JERSEY AND ONE SIDE PILE KNITTED FAB IN BLACK COLOR LAMINATED WITH PU FOAM AS PER CLAUSE 4.1 (PAGE No 3-4) OF PROVISIONAL SPECIFICATION DMSRDE/FF&IT/2007/466/2(b) NOTE:- Mass of P U Foam with with PU adhesive film in middle layer shall be kept as 50g±5%

POLYESTER KNITTED FABRIC ONE SIDE SINGLE JERSEY AND ONE SIDE PILE KNITTED FAB IN BLACK COLOR LAMINATED WITH PU FOAM AS PER CLAUSE 4.1 (PAGE No 3-4) OF PROVISIONAL SPECIFICATION DMSRDE/FF&IT/2007/466/2(b) NOTE:- Mass of P U Foam with with PU adhesive film in middle layer shall be kept as 50g±5%

• AS PER ATTACHED FILE

• AS PER ATTACHED FILE

FABRICATION OF ASSEMBLY AS PER 1.4.R.4.5/ABCA( 5)

FABRICATION OF ASSEMBLY AS PER 1.4.R.4.5/ABCA( 5)

• FABRICATION OF ASSEMBLY AS PER 1.4.R.4.5/ABCA( 5)

• FABRICATION OF ASSEMBLY AS PER 1.4.R.4.5/ABCA( 5)

Fabrication of Assembly as per 1.4.R.4.5 / AAIG 1 -D(6)

Fabrication of Assembly as per 1.4.R.4.5 / AAIG 1 -D(6)

• Fabrication of Assembly as per 1.4.R.4.5 / AAIG 1 -D(6)

• Fabrication of Assembly as per 1.4.R.4.5 / AAIG 1 -D(6)

VALVE ASSY

AS PER VQC ATTACHED

188.86.011CBCB

• AS PER VQC ATTACHED
• -
• -
• -
• -

• AS PER VQC ATTACHED
• -
• -
• -
• -

FABRICATION OF ASSEMBLY AS PER 1.4.R.4.5/AAFD-1C(11)

FABRICATION OF ASSEMBLY AS PER 1.4.R.4.5/AAFD-1C(11)

• FABRICATION OF ASSEMBLY

• FABRICATION OF ASSEMBLY AS PER 1.4.R.4.5/AAFD-C(11)

Bushing to LF 3906402023 to Drg 172-2M.52.005/F

GOST 4543-71

172-2M.52.005/F

• As per VQC

• As per QAP

RH Rear Flange Operation 10 to 20 Semi Machined Forging to LF 3951040114 to Drg. No. 172.40.372/SMF

GOST 4543-71

172.40.372/SMF

• As per VQC

• As per QAP

6206420118 GUIDE 175 64 058

6206420118 GUIDE 175 64 058

175.64.058

• AS PER VQC

• AS PER QAP

6206402047 COVER 175 41 064

6206402047 COVER 175 41 064

175.41.064

• AS PER VQC

• AS PER QAP

6206890059 GEAR 172 28 005

6206890059 GEAR 172 28 005

172.28.005

• AS PER VQC

• AS PER QAP

6201041038 FORK 188 41 007

6201041038 FORK 188 41 007

188.41.007

• AS PER VQC

• AS PER QAP

HIGH GRADE MILD KILLED STEEL PLATE OF GRASDE11 IOA TOSPECN. GOST B 19032 -73 OR IOF 2503, DEOXIDIZED BY ALUMINIUM WITH CHEMICAL COMPOSITION AS PER DRG. NO CC-548 WITH SIZE 23 +2 MM THICK X 286+ 5 MM WIDTH X 1430 +100 MM LENGTH.

HIGH GRADE MILD KILLED STEEL PLATE OF GRASDE11 IOA TOSPECN. GOST B 19032 -73 OR IOF 2503, DEOXIDIZED BY ALUMINIUM WITH CHEMICAL COMPOSITION AS PER DRG. NO CC-548 WITH SIZE 23 +2 MM THICK X 286+ 5 MM WIDTH X 1430 +100 MM LENGTH.

CC-548

• AS PER ATTACHMENT

• AS PER ATTACHMENT

6201081027 PLATE 188 81 009

6201081027 PLATE 188 81 009

188.81.009

• AS PER VQC

• AS PER QAP

6206211042 CASING LEFT HAND 175 28 006

6206211042 CASING LEFT HAND 175 28 006

175.28.006

• AS PER VQC

• AS PER QAP

6206807106 BOSS 172 10 183

6206807106 BOSS 172 10 183

172.10.183

• AS PER VQC

• AS PER QAP

6206910218 SHIM 175 51 033 04

6206910218 SHIM 175 51 033 04

175.51.033-04

• AS PER VQC

• AS PER QAP

6206203173 RIB 175 18 057

6206203173 RIB 175 18 057

• AS PER VQC

• AS PER QAP

6206803184 LEFT REAR RIB 172 04 575

6206803184 LEFT REAR RIB 172 04 575

172.04.575

• AS PER VQC

• AS PER QAP

6206803220 STRAP 175 04 044 A

6206803220 STRAP 175 04 044 A

175.04.044-A

• AS PER VQC

• AS PER QAP

6206807162 STRAP 175.10.033

6206807162 STRAP 175.10.033

175.10.033

• AS PER VQC

• AS PER QAP

COLD ROLLED ALUMINIUM ALLOY SHEETS TO GRADE EN AW-6082, SIZE:10.3 + 0.2/-0.1 MM THICK X 915 MM WIDE X 1730 MM LONG AS PER ANNEXURE “A” DATED 04/03/2020.

COLD ROLLED ALUMINIUM ALLOY SHEETS TO GRADE EN AW-6082, SIZE:10.3 + 0.2/-0.1 MM THICK X 915 MM WIDE X 1730 MM LONG AS PER ANNEXURE “A” DATED 04/03/2020.

• AS PER ATTACHMENT

• AS PER ATTACHMENT

25 MM + 0.2/-0.1 MM THICK X 915 MM WIDE X 1730 MM LONG ROLLED ALUMINIUM ALLOY SHEET TO SPECIFICATION (A) US SPECN. GR-AA 6082 IN “M” CONDITION OR (B) BS 1474-1987, GR-6082 IN “F” CONDITION OR (C) IS 736-1986, GR-64430 IN “M” CONDITION.

25 MM + 0.2/-0.1 MM THICK X 915 MM WIDE X 1730 MM LONG ROLLED ALUMINIUM ALLOY SHEET TO SPECIFICATION (A) US SPECN. GR-AA 6082 IN “M” CONDITION OR (B) BS 1474-1987, GR-6082 IN “F” CONDITION OR (C) IS 736-1986, GR-64430 IN “M” CONDITION.

• AS PER ATTACHMENT

• AS PER ATTACHMENT

ADJUSTMENT UNIT AS PER CQA(I) DRAWING NO.CQA(I)-820/A-6 (OEM DRAWING NO.E162-16-PPN0001-R02) LF 7440209050

ADJUSTMENT UNIT AS PER CQA(I) DRAWING NO.CQA(I)-820/A-6 (OEM DRAWING NO.E162-16-PPN0001-R02) LF 7440209050

ADJUSTMENT UNIT AS PER CQA(I) DRAWING NO.CQA(I)-820/A-6 (OEM DRAWING NO.E162-16-PPN0001-R02) LF 7440209050

• ELECTRONICS ITEM

• ELECTRONICS ITEM

LIMITING DEVICE AS PER CQA(I) DRAWING NO.CQA(I)-820/A-17 (OEM DRAWING NO.E162-00-MAD2000-03-R00) LF 7440209060

LIMITING DEVICE AS PER CQA(I) DRAWING NO.CQA(I)-820/A-17 (OEM DRAWING NO.E162-00-MAD2000-03-R00) LF 7440209060

LIMITING DEVICE AS PER CQA(I) DRAWING NO.CQA(I)-820/A-17 (OEM DRAWING NO.E162-00-MAD2000-03-R00) LF 7440209060

• ELECTRONICS ITEM

• ELECTRONICS ITEM

AMPLIFIER ASSEMBLY AS PER CQA(I) DRAWING NO.CQA(I)-820/A-16 (OEM DRAWING NO.E162-01-PPN0001) LF 7440209059

AMPLIFIER ASSEMBLY AS PER CQA(I) DRAWING NO.CQA(I)-820/A-16 (OEM DRAWING NO.E162-01-PPN0001) LF 7440209059

AMPLIFIER ASSEMBLY AS PER CQA(I) DRAWING NO.CQA(I)-820/A-16 (OEM DRAWING NO.E162-01-PPN0001) LF 7440209059

• ELECTRONICS ITEM

• ELECTRONICS ITEM

CARRIER ASSEMBLY AS PER CQA(I) DRAWING NO.CQA(I)-820/A-15 (OEM DRAWING NO.E162-CARRIER-MAD) LF 7440209058

CARRIER ASSEMBLY AS PER CQA(I) DRAWING NO.CQA(I)-820/A-15 (OEM DRAWING NO.E162-CARRIER-MAD) LF 7440209058

CARRIER ASSEMBLY AS PER CQA(I) DRAWING NO.CQA(I)-820/A-15 (OEM DRAWING NO.E162-CARRIER-MAD) LF 7440209058

• ELECTRONIC ITEM

• ELECTRONICS ITEM

AMPLIFIER PCB AS PER CQA(I) DRAWING NO.CQA(I)-820/A-14 (OEM DRAWING NO.E162-00-MAD2000-02-R00) LF 7440209057

AMPLIFIER PCB AS PER CQA(I) DRAWING NO.CQA(I)-820/A-14 (OEM DRAWING NO.E162-00-MAD2000-02-R00) LF 7440209057

AMPLIFIER PCB AS PER CQA(I) DRAWING NO.CQA(I)-820/A-14 (OEM DRAWING NO.E162-00-MAD2000-02-R00) LF 7440209057

• ELECTRONICS ITEM

• ELECTRONICS ITEM

COMPENSATOR PCB AS PER CQA(I) DRAWING NO.CQA(I)-820/A-13 (OEM DRAWING NO.E162-02-PPN001-R01) LF 7440209056

COMPENSATOR PCB AS PER CQA(I) DRAWING NO.CQA(I)-820/A-13 (OEM DRAWING NO.E162-02-PPN001-R01) LF 7440209056

COMPENSATOR PCB AS PER CQA(I) DRAWING NO.CQA(I)-820/A-13 (OEM DRAWING NO.E162-02-PPN001-R01) LF 7440209056

• ELECTRONICS ITEM

• ELECTRONICS ITEM

EAU PCB AS PER CQA(I) DRAWING NO.CQA(I)-820/A-12 (OEM DRAWING NO.E162-04-PPN001-R01) LF 7440209055

EAU PCB AS PER CQA(I) DRAWING NO.CQA(I)-820/A-12 (OEM DRAWING NO.E162-04-PPN001-R01) LF 7440209055

EAU PCB AS PER CQA(I) DRAWING NO.CQA(I)-820/A-12 (OEM DRAWING NO.E162-04-PPN001-R01) LF 7440209055

• ELECTRONICS ITEM

• ELECTRONICS ITEM

CARRIER BOARD AS PER CQA(I) DRAWING NO.CQA(I)-820/A-10 (OEM DRAWING NO.E162-02-04-PPN001-R01) LF 7440209054

CARRIER BOARD AS PER CQA(I) DRAWING NO.CQA(I)-820/A-10 (OEM DRAWING NO.E162-02-04-PPN001-R01) LF 7440209054

CARRIER BOARD AS PER CQA(I) DRAWING NO.CQA(I)-820/A-10 (OEM DRAWING NO.E162-02-04-PPN001-R01) LF 7440209054

• ELECTRONICS ITEM

• ELECTRONICS ITEM

ASSY OF EAU & COMPENSATOR AS PER CQA(I) DRAWING NO.CQA(I)-820/A-9 (OEM DRAWING NO.E162-00-MAD2000-R00) LF 7440209053

ASSY OF EAU & COMPENSATOR AS PER CQA(I) DRAWING NO.CQA(I)-820/A-9 (OEM DRAWING NO.E162-00-MAD2000-R00) LF 7440209053

ASSY OF EAU & COMPENSATOR AS PER CQA(I) DRAWING NO.CQA(I)-820/A-9 (OEM DRAWING NO.E162-00-MAD2000-R00) LF 7440209053

• ELECTRONICS ITEM

• ELECTRONICS ITEM

ASSEMBLY OF PCB AS PER CQA(I) DRAWING NO.CQA(I)-820/A-11 (OEM DRAWING NO.E162-00-MAD1800-R00) LF 7440209052

ASSEMBLY OF PCB AS PER CQA(I) DRAWING NO.CQA(I)-820/A-11 (OEM DRAWING NO.E162-00-MAD1800-R00) LF 7440209052

ASSEMBLY OF PCB AS PER CQA(I) DRAWING NO.CQA(I)-820/A-11 (OEM DRAWING NO.E162-00-MAD1800-R00) LF 7440209052

• ELECTRONICS ITEM

• ELECTRONICS ITEM

PULSE COUNTER AS PER CQA(I) DRAWING NO.CQA(I)-820/A-7 (OEM DRAWING NO.E162-00-MAD1400-R00) LF 7440209051

PULSE COUNTER AS PER CQA(I) DRAWING NO.CQA(I)-820/A-7 (OEM DRAWING NO.E162-00-MAD1400-R00) LF 7440209051

PULSE COUNTER AS PER CQA(I) DRAWING NO.CQA(I)-820/A-7 (OEM DRAWING NO.E162-00-MAD1400-R00) LF 7440209051

• ELECTRONICS ITEM

• ELECTRONICS ITEM

ADJUSTMENT UNIT AS PER CQA(I) DRAWING NO.CQA(I)-820/A-31 (OEM DRAWING NO.E162-00-MAD1300-R00) LF 7440209049

ADJUSTMENT UNIT AS PER CQA(I) DRAWING NO.CQA(I)-820/A-31 (OEM DRAWING NO.E162-00-MAD1300-R00) LF 7440209049

ADJUSTMENT UNIT AS PER CQA(I) DRAWING NO.CQA(I)-820/A-31 (OEM DRAWING NO.E162-00-MAD1300-R00) LF 7440209049

• ELECTRONICS ITEM

• ELECTRONICS ITEM

DRIFT ADJUSTMENT AS PER CQA(I) DRAWING NO.CQA(I)-820/A-3 (OEM DRAWING NO.E162-00-MAD1200-R00) LF 7440209048

DRIFT ADJUSTMENT AS PER CQA(I) DRAWING NO.CQA(I)-820/A-3 (OEM DRAWING NO.E162-00-MAD1200-R00) LF 7440209048

DRIFT ADJUSTMENT AS PER CQA(I) DRAWING NO.CQA(I)-820/A-3 (OEM DRAWING NO.E162-00-MAD1200-R00) LF 7440209048

• ELECTRONICS ITEM

• ELECTRONICS ITEM

HEAT CONTROL AS PER CQA(I) DRAWING NO.CQA(I)-820/A-2 (OEM DRAWING NO.E162-06-08-10-PPN0001) LF 7440209047

HEAT CONTROL AS PER CQA(I) DRAWING NO.CQA(I)-820/A-2 (OEM DRAWING NO.E162-06-08-10-PPN0001) LF 7440209047

HEAT CONTROL AS PER CQA(I) DRAWING NO.CQA(I)-820/A-2 (OEM DRAWING NO.E162-06-08-10-PPN0001) LF 7440209047

• ELECTRONICS ITEM

• ELECTRONICS ITEM

HEAT RECTIFIER AS PER CQA(I) DRAWING NO.CQA(I)-820/A-1 (OEM DRAWING NO.E162-00-MAD1100-R00) LF 7440209046

HEAT RECTIFIER AS PER CQA(I) DRAWING NO.CQA(I)-820/A-1 (OEM DRAWING NO.E162-00-MAD1100-R00) LF 7440209046

HEAT RECTIFIER AS PER CQA(I) DRAWING NO.CQA(I)-820/A-1 (OEM DRAWING NO.E162-00-MAD1100-R00) LF 7440209046

• ELECTRONICS ITEM

• ELECTRONICS ITEM

MATTRESS ECC COMPLETE WITH COVER.

Specification: No. S/6252/C/Mattress ECC/TC-6

• As per Specification

• As per Specification

Shaft Secondary to Drg. No. 175.40.028/F

GOST 4543-71

175.40.028/F

• As per VQC

• As per QAP

RH Crank to Drg. No. 175.56.001/F

GOST 4543-71

175.56.001/F

• As per VQC

• As per QAP

Gear Sun IV Train Operation 15 to 20 Semi Machined Forging to Drg. No. 175.40.029-1/SMF

GOST 4543-71

175.40.029-1/SMF

• As per VQC

• As per QAP

CONNECTING LINK RIGID TO DRG NO 5112 WITH FIRMS MATERIAL IN FULLY FINISHED CONDITION AND THE MANUFACTURING SHOULD BE THROUGH INVESTMENT CASTING ROUTE REQD FOR 30MM CANNON

As per TE

2A42.05.112

• As per TE

• As per TE

CONNECTING LINK RIGID TO DRG NO C5028 WITH FIRMS MATERIAL IN FULLY FINISHED CONDITION AND THE MANUFACTURING SHOULD BE THROUGH INVESTMENT CASTING ROUTE REQD FOR 30MM CANNON

As per TE

2A42.05.028

• As per TE

• As per TE

PAWL TO DRG NO C1024 WITH FIRMS MATERIAL IN FULLY FINISHED AND THE MANUFACTURING SHOULD BE THROUGH INVESTMENT CASTING ROUTE REQD FOR 30MM CANNON

As per TE

2A42.01.024

• As per TE

• As per TE

CARRIER OF 1ST, 2ND AND 3RD PLANETARY GEAR SET OPN. 20,30,50,60,70 SEMI MACHINED FORGING TO DRG. NO. 172.40.316/SMF

GOST 4543-71

172.40.316/SMF

• AS PER VQC

• AS PER QAP

Clip for Three Way Joint

As per Specn. no. DMSRDE/T&GS/93/407

• As per Specification
• As per Specification

• As per Specification

9073001401 CLEANING ROD ASSY DS 1015004164 DRG NO 902 03 100CB

9073001401 CLEANING ROD ASSY DS 1015004164 DRG NO 902 03 100CB

902 03 100CB

• 9073001401 CLEANING ROD ASSY DS 1015004164 DRG NO 902 03 100CB

• 9073001401 CLEANING ROD ASSY DS 1015004164 DRG NO 902 03 100CB

WHEEL CHAIN(SNOW CHAIN) ARTICLE NO. 6351639.(CES ITEM(SECTION-1) DRG. NO. GCF/50/40646

WHEEL CHAIN(SNOW CHAIN) ARTICLE NO. 6351639.(CES ITEM(SECTION-1) DRG. NO. GCF/50/40646

WHEEL CHAIN(SNOW CHAIN) ARTICLE NO. 6351639.(CES ITEM(SECTION-1) DRG. NO. GCF/50/40646

• WHEEL CHAIN(SNOW CHAIN) ARTICLE NO. 6351639.(CES ITEM(SECTION-1) DRG. NO. GCF/50/40646

• WHEEL CHAIN(SNOW CHAIN) ARTICLE NO. 6351639.(CES ITEM(SECTION-1) DRG. NO. GCF/50/40646

FOUR WAY ALUMINUM JOINT MADE WITH PRESSURE DIE CASTING FOR TEFS

Specification : As per specification no.CQA(GS)/US/467(e), joints shall be casted by pressure die casting.

• As per Specification

• As per Specification

THREE WAY ALUMINUM JOINT FOR ROOF POLE MADE WITH PRESSURE DIE CASTING FOR TEFS

Specification : As per specification no.CQA(GS)/US/467(e), joints shall be casted by pressure die casting.

• As per Specification

• As per Specification

THREE WAY ALUMINUM JOINT WITH BASE PLATE MADE WITH PRESSURE DIE CASTING FOR TEFS

Specification : As per specification no.CQA(GS)/US/467(e), joints shall be casted by pressure die casting.

• As per Specification

• As per Specification

CCC SET M-92

05 NOS. COMBUSTIBLE CARTRIDGE CASE DWG. NO. OFN/BMCS/M-92/CCC 05 NOS. PRD AS PER DWG. NO. OFN/BMCS/M-92/PRD 05 NOS. IGNITER TUBE AS PER DWG.NO. OFN/BMCS/M-92/IT 05 NOS. DISC SPACER DWG. NO. OFN/BMCS/M-91/M-92/DISC SPACER 01 FOAM SPACER, 01 CORRUGATED LINER, 01 FINAL PACKING TUBE.

DWG. NO. OFN/BMCS/M-92/CCC, DWG. NO. OFN/BMCS/M-92/PRD, DWG.NO. OFN/BMCS/M-92/IT, DWG. NO. OFN/BMCS/M-91/M-92/DISC SPACER, DWG NO. OFN/BMCS/M-91/M-92/PACKING TUBE/CYLINDER

• AS PER DOCUMENT UPLOADED
• NA
• NA
• NA
• NA

• AS PER DOCUMENT UPLOADED
• NA
• NA
• NA
• NA

COAXIAL CABLE BROWN, 18 AWG. 7 X 0.102 MM, 82 FT, 25 M MAKE- CARLISLEIT MANUFACTURER PART NO. MRG 179.0125 (LF 9001121785)

COAXIAL CABLE BROWN, 18 AWG. 7 X 0.102 MM, 82 FT, 25 M MAKE- CARLISLEIT MANUFACTURER PART NO. MRG 179.0125 (LF 9001121785)

COAXIAL CABLE BROWN, 18 AWG. 7 X 0.102 MM, 82 FT, 25 M MAKE- CARLISLEIT MANUFACTURER PART NO. MRG 179.0125 (LF 9001121785)

• ELECTRONICS ITEM

• ELECTRONICS ITEM

FILTER BOARD ASSEMBLY FOR TANK T-90 AS PER BEL PART NO. 170300602264 (LF 7441121738)

FILTER BOARD ASSEMBLY FOR TANK T-90 AS PER BEL PART NO. 170300602264 (LF 7441121738)

FILTER BOARD ASSEMBLY FOR TANK T-90 AS PER BEL PART NO. 170300602264 (LF 7441121738)

• ELECTRONICS ITEM

• ELECTRONICS ITEM

REGIFLEX PCB FOR CDR. TI SIGHT OF TANK T-90 (BEL PART NO. 170000367476) (DELIVERABLES AS PER ATTECHED OLF SHEET NO. CDR. TI T-90/EL/REGIFLEX/01(R)) (LF 7441121505)

REGIFLEX PCB FOR CDR. TI SIGHT OF TANK T-90 (BEL PART NO. 170000367476) (DELIVERABLES AS PER ATTECHED OLF SHEET NO. CDR. TI T-90/EL/REGIFLEX/01(R)) (LF 7441121505)

REGIFLEX PCB FOR CDR. TI SIGHT OF TANK T-90 (BEL PART NO. 170000367476) (DELIVERABLES AS PER ATTECHED OLF SHEET NO. CDR. TI T-90/EL/REGIFLEX/01(R)) (LF 7441121505)

• ELECTRONICS ITEM

• ELECTRONICS ITEM

OLED BOARD FOR CDR. TI SIGHT OF TANK T-90 (BEL PART NO. 170314213110) DELIVERABLES AS PER ATTECHED OLF SHEET NO. CDR. TI T-90/EL/OLED BOARD/01(R) (LF 7441121503)

OLED BOARD FOR CDR. TI SIGHT OF TANK T-90 (BEL PART NO. 170314213110) DELIVERABLES AS PER ATTECHED OLF SHEET NO. CDR. TI T-90/EL/OLED BOARD/01(R) (LF 7441121503)

OLED BOARD FOR CDR. TI SIGHT OF TANK T-90 (BEL PART NO. 170314213110) DELIVERABLES AS PER ATTECHED OLF SHEET NO. CDR. TI T-90/EL/OLED BOARD/01(R) (LF 7441121503)

• ELECTRONICS ITEM

• ELECTRONICS ITEM

HEATER PCB FOR TANK T-90 AS PER BEL PART NO. 170300603040 (LF 7441121737)

HEATER PCB FOR TANK T-90 AS PER BEL PART NO. 170300603040 (LF 7441121737)

HEATER PCB FOR TANK T-90 AS PER BEL PART NO. 170300603040 (LF 7441121737)

• ELECTRONICS ITEM

• ELECTRONICS ITEM

POWER SUPPLY & CONTROL BOARD INCLUDING EMI/EMC PCB FOR CDR. TI SIGHT OF TANK T-90 (BEL PART NO. 170300216495) (DELIVERABLES AS PER ATTECHED OLF SHEET NO. CDR. TI T-90/EL/PSCB/01(R)) (LF 7441121504)

POWER SUPPLY & CONTROL BOARD INCLUDING EMI/EMC PCB FOR CDR. TI SIGHT OF TANK T-90 (BEL PART NO. 170300216495) (DELIVERABLES AS PER ATTECHED OLF SHEET NO. CDR. TI T-90/EL/PSCB/01(R)) (LF 7441121504)

POWER SUPPLY & CONTROL BOARD INCLUDING EMI/EMC PCB FOR CDR. TI SIGHT OF TANK T-90 (BEL PART NO. 170300216495) (DELIVERABLES AS PER ATTECHED OLF SHEET NO. CDR. TI T-90/EL/PSCB/01(R)) (LF 7441121504)

• ELECTRONICS ITEM

• ELECTRONICS ITEM

PRINTED BOARD ASSY. UNIT FOR VOLTAGE CONVERTOR DRG. NO. 9S831.060 (LF 7440101189)

PRINTED BOARD ASSY. UNIT FOR VOLTAGE CONVERTOR DRG. NO. 9S831.060 (LF 7440101189)

PRINTED BOARD ASSY. UNIT FOR VOLTAGE CONVERTOR DRG. NO. 9S831.060 (LF 7440101189)

• ELECTRONICS ITEM

• ELECTRONICS ITEM

PRINTED BOARD ASSY. UNIT FOR VOLTAGE CONVERTOR DRG. NO. 9S831.050 (LF 7440101188)

PRINTED BOARD ASSY. UNIT FOR VOLTAGE CONVERTOR DRG. NO. 9S831.050 (LF 7440101188)

PRINTED BOARD ASSY. UNIT FOR VOLTAGE CONVERTOR DRG. NO. 9S831.050 (LF 7440101188)

• ELECTRONICS ITEM

• ELECTRONICS ITEM

7441121506 VIDEO PROCESSING ELECTRONICS Drg No.CDR. TI T-90/EL/VPE/01(R) VIDEO PROCESSING ELECTRONICS F OR CDR. TI SIGHT OF TANK T-90 (BEL PART NO. 170312108210) ( DELIVERABLES AS PER ATTECHED O LF SHEET NO. CDR. TI T-90/EL/V PE/01(R))

7441121506 VIDEO PROCESSING ELECTRONICS Drg No.CDR. TI T-90/EL/VPE/01(R) VIDEO PROCESSING ELECTRONICS F OR CDR. TI SIGHT OF TANK T-90 (BEL PART NO. 170312108210) ( DELIVERABLES AS PER ATTECHED O LF SHEET NO. CDR. TI T-90/EL/V PE/01(R))

7441121506 VIDEO PROCESSING ELECTRONICS Drg No.CDR. TI T-90/EL/VPE/01(R) VIDEO PROCESSING ELECTRONICS F OR CDR. TI SIGHT OF TANK T-90 (BEL PART NO. 170312

• ELECTRONIC ITEM

• ELECTRONIC ITEM

7440201449 CABLE Drg No.BG29-4S 250 CABLE TO DRG NO BG29-4S 250

7440201449 CABLE Drg No.BG29-4S 250 CABLE TO DRG NO BG29-4S 250

7440201449 CABLE Drg No.BG29-4S 250 CABLE TO DRG NO BG29-4S 250

• ELECTRONIC ITEM

• ELECTRONIC ITEM

CABLE BV29.050 FOR BV29.000

ATTACHED

BV29.000

• ATTACHED

• ATTACHED

SHEET AMG6 to DRG/SPC No. GOST:21631-76(2.5 MM), LF No. 0618722459, SHEET GR: AMG6 2.5THK X 1200 X 2000 MM LG, ALU ALTERNATE MATERIAL: IS:737-08 Grade 54300(Chemical) Mechanical as per GOST 21631,Annealed

SPC No. GOST:21631-76(2.5 MM) ALTERNATE MATERIAL: IS:737-08 Grade 54300(Chemical) Mechanical as per GOST 21631,Annealed

GOST:21631-76(2.5 MM)

• As per attached Vendor Qualification Criteria

• As per Attached QAP

ACCESS HOLE COVER to DRG No.175.03.009-1A, LF No.6206802071

OST B3 - 75-77

175.03.009-1A

• As per Vendor qualification Criteria

• As per QAP

COVER TO DRG No.175.03.006-1A, LF No.6206802068

OST B3 - 75 -77

175.03.006-1A

• As per Vendor Qualification Criteria

• As per QAP

PAWL TO DRG NO C1039 1 WITH FIRMS MATERIAL AND THE MANUFACTURING SHOULD BE THROUGH RAW MATERIAL ROUTE REQD FOR 30 MM CANNON

As per TE

2A42.01.039

• As per TE

• As per TE

MACHINING MILLING AND GRINDING OF ANTI REBOUND C1048 TO DRG NO TEND 2174 STAR WITH FIRMS MATERIAL

As per TE

TEND 2174 STAR

• As per TE

• As per TE

MANUFACTURING AND SUPPLY OF PAWL TO DRG NO C5096 IN FULLY FINISHED CONDITION WITH FIRMS MATERIAL LATEST TO BE FOLLOWED

As per TE

2A42.05.096

• As per TE

• As per TE

M.S.BASE PLATE OF SIZE:150MM X75MM X7.5MM(L X B X T)

Specification : Prov. Spec.No.DMSRDE/T&GS/93/407(B) and GRADE ST-42-S of IS:280.

• As per Specification

• As per Specification

HFW STEEL TUBES OF 42MM OD AND 3MM WALL THICKNESS AND LENGTH 150MM

Specification : prov. spec.DMSRDE/T&GS/93/407(B) AND GRADE YST-32 OF IS:1161 REMARK: FOR FOUR WAY JOINTS (FRONT/BACK)

• As per Specification

• As per Specification

WOODEN CRATE STYLE NO.5 CLASS A FOR PIN STEEL TWISTED AND PIN STEEL L-SHAPE INTERNAL DIMENSION:700MM X450MM X450MM (L X B X H)

Specification : IS:3071

• As per Specification

• As per Specification

FORK TO DRG NO: 188.41.007

GOST 4543-71

188.41.007

• AS PER VQC

• AS PER QAP

BOOSTER BODY RIGHT

BOOSTER BODY RIGHT

175.40.052

• AS PER DRG. REQUIREMENT

• CMM AND GE METHOD

ALUMINIUM ALLOY ROD 75 MM DIA TO ASTM B221M GRADE 7075 T6510 AS PER SPECIFICATION ENCLOSED

ALUMINIUM ALLOY ROD 75 MM DIA TO ASTM B221M GRADE 7075 T6510 AS PER SPECIFICATION ENCLOSED

• AS PER SPECIFICATION ENCLOSED

• AS PER SPECIFICATION ENCLOSED AND ASTM B221M GRADE 7075-T6510,

CONE FRONT AND CONE REAR-2 items

AS PER DRG.

172.45.009, 172.45.008

• AS PER DRG. AND GOST SPECIFICATION

• CMM

CONE FRONT AND CONE REAR-2 items

AS PER DRG.

172.45.009, 172.45.008

• AS PER DRG. AND GOST SPECIFICATION

• CMM

As per specification

As per specification

DRAWING NO.175.91.140 CBCB

• As per specification

• As per specification