1201
110190301
Ordnance Parachute Factory
The General Manager,
Kanpur
Kanpur
Kanpur, Uttar Pradesh
208004
Name
Code
Quantity
Approx Value
Select
Tape Nylon 19 mm BS 550 Kgf SG
Description
Tape Nylon 19 mm BS 550 Kgf SG
Specification
ADRDE/SPECN/76
Manufacturing Technology
As Per Specification/Drawing
Testing / Inspection Facility
As Per Specification/Drawing
2101221452
1
Metre
Tape Nylon 25 mm BS 2350 N 240 Kgf Blue
Description
Tape Nylon 25 mm BS 2350 N(240 Kgf) Blue
Specification
ADRDE/QMS/TGTE/T/2021/01/(a) dtd. 13.01.2022.
Manufacturing Technology
As Per Specification/Drawing
Testing / Inspection Facility
As Per Specification/Drawing
2101221453
15
Metre
Tape Nylon Tubular 26 mm 1850 Kgf Yellow
Description
Tape Nylon Tubular 26 mm 1850 Kgf Yellow
Specification
ADRDE/SPECN/2000/54(e).
Manufacturing Technology
As Per Specification/Drawing
Testing / Inspection Facility
As Per Specification/Drawing
2101221454
18
Metre
Webbing Nylon 76 mm BS 8025N 818 Kgf SG
Description
Webbing Nylon 76 mm BS 8025N (818 Kgf) SG
Specification
ADRDE/QMS/TGTE/W/2022/08 dtd. 13.01.2022.
Manufacturing Technology
As Per Specification/Drawing
Testing / Inspection Facility
As Per Specification/Drawing
2101221470
58
Metre
Webbing Nylon 19 mm 2678N 273 Kgf SG
Description
Webbing Nylon 19 mm 2678N (273 Kgf) SG
Specification
ADRDE/QMS/TGTE/W/2022/02 dtd. 13.01.2022.
Manufacturing Technology
As Per Specification/Drawing
Testing / Inspection Facility
As Per Specification/Drawing
2101221451
72
Metre
Webbing Nylon 19 mm 2678N 273 Kgf Sand
Description
Webbing Nylon 19 mm 2678N (273 Kgf) Sand
Specification
ADRDE/QMS/TGTE/W/2022/02 dtd. 13.01.2022.
Manufacturing Technology
As Per Specification/Drawing
Testing / Inspection Facility
As Per Specification/Drawing
2101221450
72
Metre
Webbing Nylon 19 mm 2678N 273 Kgf OG
Description
Webbing Nylon 19 mm 2678N (273 Kgf) OG
Specification
ADRDE/QMS/TGTE/W/2022/02 dtd. 13.01.2022.
Manufacturing Technology
As Per Specification/Drawing
Testing / Inspection Facility
As Per Specification/Drawing
2101221449
70
Metre
Webbing Nylon 19 mm 2678N 273 Kgf Black
Description
Webbing Nylon 19 mm 2678N (273 Kgf) Black
Specification
ADRDE/QMS/TGTE/W/2022/02 dtd. 13.01.2022.
Manufacturing Technology
As Per Specification/Drawing
Testing / Inspection Facility
As Per Specification/Drawing
2101221448
72
Metre
Webbing Nylon 19 mm 2678N 273 Kgf UD
Description
Webbing Nylon 19 mm 2678N (273 Kgf) UD
Specification
ADRDE/QMS/TGTE/W/2022/02 dtd. 13.01.2022.
Manufacturing Technology
As Per Specification/Drawing
Testing / Inspection Facility
As Per Specification/Drawing
2101221447
48
Metre
Tape Nylon Tubular 26 mm BS 1850 Kgf OG
Description
Tape Nylon Tubular 26 mm BS 1850 Kgf OG
Specification
ADRDE/SPECN/2000/54(e)
Manufacturing Technology
As Per Specification/Drawing
Testing / Inspection Facility
As Per Specification/Drawing
2101221477
12
Metre
Tape Nylon 14 mm BS 230 Kgf SG
Description
Tape Nylon 14 mm BS 230 Kgf SG
Specification
IS: 4228-1979, Vty- 1
Manufacturing Technology
As Per Specification/Drawing
Testing / Inspection Facility
As Per Specification/Drawing
2101221475
18
Metre
Webbing Nylon 25 mm 1134 Kgf Red
Description
Webbing Nylon 25 mm 1134 Kgf Red
Specification
ADRDE/QMS/TGTE/W/2022/13 dtd. 13.07.2022.
Manufacturing Technology
As Per Specification/Drawing
Testing / Inspection Facility
As Per Specification/Drawing
2101221445
48
Metre
Webbing Nylon 38 mm BS 6690 N 682 Kgf SG
Description
Webbing Nylon 38 mm BS 6690 N (682 Kgf) SG
Specification
ADRDE/QMS/TGTE/W/2022/04 dtd. 13.01.2022
Manufacturing Technology
As Per Specification/Drawing
Testing / Inspection Facility
As Per Specification/Drawing
2101221442
96
Metre
Webbing Nylon 13 mm 2452 N 250 Kgf SG
Description
Webbing Nylon 13 mm 2452 N (250 Kgf) SG
Specification
ADRDE/QMS/TGTE/W/2022/01 dtd. 13.01.2022
Manufacturing Technology
As Per Specification/Drawing
Testing / Inspection Facility
As Per Specification/Drawing
2101221441
66
Metre
Webbing Nylon 19 mm BS 1818 Kgf Yellow
Description
Webbing Nylon 19 mm BS 1818 Kgf Yellow
Specification
ADRDE/QMS/TGTE/W/2022/04 (a) dtd. 13.01.2022
Manufacturing Technology
As Per Specification/Drawing
Testing / Inspection Facility
As Per Specification/Drawing
2101221440
90
Metre
1202
128MMETT20001880
Ordnance Factory Tiruchirapalli
The General Manager,
Tiruchirapalli
Tiruchirapalli
Tamil Nadu
620016
Name
Code
Quantity
Approx Value
Select
STEEL DIA 34 X 355 mm JSS 9510 06 2012 REV 5 CODE REF B T1 CON HOT ROLED PEELED REELED SOFTENED HARDNES 255 HB MAX
Description
Steel dia.34X355mm+2.0 LENGTH VAC. DEGASSED TO JSS:9510-06-2012 (REV.5) CODE REF.B.'T1'COND.HOT ROLLED, PEELED, REELED, SOFTENED. HARDNESS: 255HB MAX. (%S+%P=0.022MAX)(S0.010 & P 0.015MAX Mo. 0.2 MIN. 0.3 MAX. (NOT AS IN JSS:9510)NMIR-IS:4163-82.
Specification
Steel dia.34X355mm+2.0 LENGTH VAC. DEGASSED TO JSS:9510-06-2012 (REV.5) CODE REF.B.'T1'COND.HOT ROLLED, PEELED, REELED, SOFTENED. HARDNESS: 255HB MAX. (%S+%P=0.022MAX)(S0.010 & P 0.015MAX Mo. 0.2 MIN. 0.3 MAX. (NOT AS IN JSS:9510)NMIR-IS:4163-82.
Manufacturing Technology
AS PER SPEC
AS PER SPEC
AS PER SPEC
AS PER SPEC
AS PER SPEC
Testing / Inspection Facility
AS PER SPEC
AS PER SPEC
AS PER SPEC
AS PER SPEC
AS PER SPEC
70
10000
Kilogram
OIL BOTTLE AS PER DRG NO K 9028 REQUIRED FOR TRICHY ASSAULT RIFLE
Description
OIL BOTTLE AS PER DRG NO K 9028 REQUIRED FOR TRICHY ASSAULT RIFLE
Specification
OIL BOTTLE AS PER DRG NO K 9028 REQUIRED FOR TRICHY ASSAULT RIFLE
Manufacturing Technology
BLOW MOULDING AND INJECTION MOULDING
BLOW MOULDING AND INJECTION MOULDING
BLOW MOULDING AND INJECTION MOULDING
BLOW MOULDING AND INJECTION MOULDING
BLOW MOULDING AND INJECTION MOULDING
Testing / Inspection Facility
AS PER DRAWING SPEC
AS PER DRAWING SPEC
AS PER DRAWING SPEC
AS PER DRAWING SPEC
AS PER DRAWING SPEC
70
6419
Number
1203
TE NO 190401P2FO
Gun Carriage Factory
The General Manager,
Jabalpur
Jabalpur
Jabalpur,Madhya Pradesh
482011
Name
Code
Quantity
Approx Value
Select
9080079069 HOSE TO DS CAT NO 4720 003007 PT NO IFL 7239
Physical Verification needed
Description
HOSE TO DS CAT NO 4720 003007 PT NO IFL 7239
Specification
HOSE TO DS CAT NO 4720 003007 PT NO IFL 7239
Drawing no.
HOSE TO DS CAT NO 4720 003007 PT NO IFL 7239
Manufacturing Technology
HOSE TO DS CAT NO 4720 003007 PT NO IFL 7239
Testing / Inspection Facility
90
156
Number
1204
MNF/BAFFLE/OFAJ
Ordnance Factory Ambajhari
The Sr.General Manager,
Ambajhari
Ambajhari
Maharashtra
440021
Name
Code
Quantity
Approx Value
Select
GASKET TO OFAJ DRG NO FS 2886B
Description
GASKET TO OFAJ DRG NO FS 2886B
Specification
GASKET TO OFAJ DRG NO FS 2886B
Testing / Inspection Facility
00
2271
Number
1205
HVF/TE0102190209/2019-20/TA/CBOI/SD-OTE dt 03/02/2020
Heavy Vehicle Factory
The Sr.General Manager,
Avadi
Avadi
Avadi, Tamil Nadu
600054
Name
Code
Quantity
Approx Value
Select
COVER OF FINAL DRIVE LH TO LF 3806404017
Physical Verification needed
Description
COVER OF FINAL DRIVE LH TO DRG NO: 175.43.001/C
Specification
175.43.001/C
Testing / Inspection Facility
38
14
Number
COVER OF FINAL DRIVE RH TO LF 3806404018
Physical Verification needed
Description
COVER OF FINAL DRIVE RH TO DRG NO: 175.43.002/C
Specification
175.43.002/C
Testing / Inspection Facility
38
47
Number
BODY OF LH SUCTION PUMP TO LF 3806407040
Physical Verification needed
Description
BODY OF LH SUCTION PUMP TO DRG NO: 172.46.066/C
Specification
GOST 1412-85
Testing / Inspection Facility
38
86
Number
CASTING CASE TO LF 3806211057
Physical Verification needed
Description
CASTING CASE TO DRG NO: 172.28.002-1/C
Specification
GOST 2685-75
Drawing no.
172.28.002-1/C
Testing / Inspection Facility
38
37
Number
RH DRUM TO DRG NO 172 40 300 F TO LF 3901040034
Physical Verification needed
Description
RH DRUM TO DRG NO 172 40 300 F
Specification
GOST 4543 71
Testing / Inspection Facility
39
113
Number
7102002000 NUT 520 02 002
Physical Verification needed
Description
7102002000 NUT 520 02 002
Specification
NUT 520 02 002
Drawing no.
NUT 520 02 002
Testing / Inspection Facility
71
4056
Number
7101005005 BOLT 520 01 005 05
Physical Verification needed
Description
7101005005 BOLT 520 01 005 05
Specification
BOLT 520 01 005 05
Drawing no.
BOLT 520 01 005 05
Testing / Inspection Facility
71
1125
Number
7101003006 BOLT 520 01 003 06
Physical Verification needed
Description
7101003006 BOLT 520 01 003 06
Specification
BOLT 520 01 003 06
Drawing no.
BOLT 520 01 003 06
Testing / Inspection Facility
71
966
Number
7024306050 BOLT 184 04 089CBCB M6 6H 8 40 016 GOST 5927 70
Physical Verification needed
Description
7024306050 BOLT 184 04 089CBCB M6 6H 8 40 016 GOST 5927 70
Specification
BOLT 184 04 089CBCB M6 6H 8 40 016 GOST 5927 70
Drawing no.
BOLT 184 04 089CBCB M6 6H 8 40 016 GOST 5927 70
Testing / Inspection Facility
70
4317
Number
7009216095 BOLT M16X1 5 6GX95 88 38XC 016 GOST 7808 70
Physical Verification needed
Description
7009216095 BOLT M16X1 5 6GX95 88 38XC 016 GOST 7808 70
Specification
BOLT M16X1 5 6GX95 88 38XC 016 GOST 7808 70
Drawing no.
BOLT M16X1 5 6GX95 88 38XC 016 GOST 7808 70
Testing / Inspection Facility
70
117
Number
7009116030 BOLT M16X1 5 6GX30 66 016 GOST 7808 70
Physical Verification needed
Description
7009116030 BOLT M16X1 5 6GX30 66 016 GOST 7808 70
Specification
BOLT M16X1 5 6GX30 66 016 GOST 7808 70
Drawing no.
BOLT M16X1 5 6GX30 66 016 GOST 7808 70
Testing / Inspection Facility
70
748
Number
7008908020 BOLT 3M8X1 6GX20 88 38XC 016 GOST 7808 70
Physical Verification needed
Description
7008908020 BOLT 3M8X1 6GX20 88 38XC 016 GOST 7808 70
Specification
BOLT 3M8X1 6GX20 88 38XC 016 GOST 7808 70
Drawing no.
BOLT 3M8X1 6GX20 88 38XC 016 GOST 7808 70
Testing / Inspection Facility
70
1653
Number
7008812025 BOLT 3M12X25 88 38XC 016 GOST 7808 70
Physical Verification needed
Description
7008812025 BOLT 3M12X25 88 38XC 016 GOST 7808 70
Specification
BOLT 3M12X25 88 38XC 016 GOST 7808 70
Drawing no.
BOLT 3M12X25 88 38XC 016 GOST 7808 70
Testing / Inspection Facility
70
4051
Number
7008808014 BOLT 3M8 6GX14 88 38XC 01 GOST 7808 70
Physical Verification needed
Description
7008808014 BOLT 3M8 6GX14 88 38XC 01 GOST 7808 70
Specification
BOLT 3M8 6GX14 88 38XC 01 GOST 7808 70
Drawing no.
BOLT 3M8 6GX14 88 38XC 01 GOST 7808 70
Testing / Inspection Facility
70
3443
Number
7008808012 BOLT 3M8 6GX12 88 38XC 016 GOST 7808 70
Physical Verification needed
Description
7008808012 BOLT 3M8 6GX12 88 38XC 016 GOST 7808 70
Specification
BOLT 3M8 6GX12 88 38XC 016 GOST 7808 70
Drawing no.
BOLT 3M8 6GX12 88 38XC 016 GOST 7808 70
Testing / Inspection Facility
70
1749
Number
7008212055 BOLT M12 6GX25 88 38XC 016 GOST 7808 70
Physical Verification needed
Description
7008212055 BOLT M12 6GX25 88 38XC 016 GOST 7808 70
Specification
BOLT M12 6GX25 88 38XC 016 GOST 7808 70
Drawing no.
BOLT M12 6GX25 88 38XC 016 GOST 7808 70
Testing / Inspection Facility
70
1564
Number
7008212025 BOLT M12 6GX25 88 38XC 016 GOST 7808 70
Physical Verification needed
Description
7008212025 BOLT M12 6GX25 88 38XC 016 GOST 7808 70
Specification
BOLT M12 6GX25 88 38XC 016 GOST 7808 70
Testing / Inspection Facility
70
5588
Number
9070056921 ROTATING SOCKET WELDING ASSY TO PART NO AMG 72089 AND DRAWING NO 1015 001560
Physical Verification needed
Description
ROTATING SOCKET WELDING ASSY. TO PART NO. AMG 72089 & DRAWING NO 1015-001560
Specification
ROTATING SOCKET WELDING ASSY. TO PART NO. AMG 72089 & DRAWING NO 1015-001560
Testing / Inspection Facility
90
257
Number
7007916045 BOLT 3M16 6GX45 66 016 GOST 7808 70
Physical Verification needed
Description
7007916045 BOLT 3M16 6GX45 66 016 GOST 7808 70
Specification
BOLT 3M16 6GX45 66 016 GOST 7808 70
Drawing no.
BOLT 3M16 6GX45 66 016 GOST 7808 70
Testing / Inspection Facility
70
174
Number
7007910025 BOLT 3M10 6GX25 66 016 GOST 7808 70
Physical Verification needed
Description
7007910025 BOLT 3M10 6GX25 66 016 GOST 7808 70
Specification
BOLT 3M10 6GX25 66 016 GOST 7808 70
Drawing no.
BOLT 3M10 6GX25 66 016 GOST 7808 70
Testing / Inspection Facility
70
1113
Number
7006512035 BOLT GOST 7805 M12X35 GOST 7805 70
Physical Verification needed
Description
BOLT GOST 7805 M12X35 GOST 7805 70
Specification
BOLT GOST 7805 M12X35 GOST 7805 70
Drawing no.
BOLT GOST 7805 M12X35 GOST 7805 70
Testing / Inspection Facility
70
2127
Number
9070056927 PINION AND GEAR ELEVATING TO DRAWING NO MI IMA 0072 C N
Physical Verification needed
Description
PINION AND GEAR ELEVATING TO DRAWING NO. MI/IMA-0072 C N
Specification
PINION AND GEAR ELEVATING TO DRAWING NO. MI/IMA-0072 C N
Drawing no.
MI/IMA-0072 C N
Testing / Inspection Facility
90
102
Number
7002912040 BOLT GOST 7796 M12X40 88 GOST 7796 70
Physical Verification needed
Description
7002912040 BOLT GOST 7796 M12X40 88 GOST 7796 70
Specification
BOLT GOST 7796 M12X40 88 GOST 7796 70
Drawing no.
BOLT GOST 7796 M12X40 88 GOST 7796 70
Testing / Inspection Facility
70
2835
Number
7002108025 BOLT M8X1 6GX25 46 016 GOST 7796 70
Physical Verification needed
Description
7002108025 BOLT M8X1 6GX25 46 016 GOST 7796 70
Specification
BOLT M8X1 6GX25 46 016 GOST 7796 70
Drawing no.
BOLT M8X1 6GX25 46 016 GOST 7796 70
Testing / Inspection Facility
70
1608
Number
1206
OFM/PV/EOI/2019/10
Ordnance Factory Muradnagar
The General Manager,
Muradnagar
Muradnagar
Uttar Pradesh
201206
Name
Code
Quantity
Approx Value
Select
MACHINING JOB WORK OF LUG 318 ITEM CODE 9449580029
Description
MACHINING JOB WORK OF LUG-318 TO DRG NO-ARM-1302C5 FROM FORGING TO BE PROVIDED BY OFM SCOPE OF WORK AS PER ANNEXURE-A
Specification
AS PER ANNEXURE-A
Drawing no.
DRG NO-ARM-1302C5
Manufacturing Technology
1.Centre Lathe
2. Milling Machine
3. Slotting Machine
Testing / Inspection Facility
94
3200
Number
6206801117 BOLT 172 01 053
Physical Verification needed
Description
6206801117 BOLT 172 01 053
Specification
BOLT 172 01 053
Drawing no.
BOLT 172 01 053
Testing / Inspection Facility
62
489
Number
MACHINING JOB WORK OF FILLING PLUG ITEM CODE 9449580031
Description
MACHINING JOB WORK OF FILLING PLUG TO DRG NO-ARM-1172B5 FROM INPUT FORGING TO BE PROVIDED BY OFM SCOPE OF WORK AS PER ANNEXURE A
Specification
AS PER ANNEXURE A
Drawing no.
DRG NO-ARM-1172B5
Manufacturing Technology
1. Centre Lathe
2. Drilling Machine
Testing / Inspection Facility
94
1270
Number
MACHINING JOB WORK OF LUG 243 ITEM CODE 9449580030
Description
MACHINING JOB WORK OF LUG-243 TO DRG NO-ARM1461D FROM INPUT FORGING TO BE PROVIDED BY OFM SCOPE OF WORK AS PER ANNEXURE -A
Specification
AS PER ANNEXURE -A
Drawing no.
DRG NO-ARM1461D
Manufacturing Technology
1. Centre Lathe.
2. Milling Machine.
3. Slotting Machine
Testing / Inspection Facility
94
3200
Number
9069112364 RACK TRAVERSING L70 IMB 000460 CN
Physical Verification needed
Description
RACK TRAVERSING (L-70) IMB 000460 CN
Specification
RACK TRAVERSING (L-70) IMB 000460 CN
Drawing no.
IMB 000460 CN
Testing / Inspection Facility
90
120
Number
SUPPLY OF SET OF FRONT SIGHT ASSY AS PER 4 DRG No K 1023 K 1031 K 1032 K 1033 WITH FIRMS MATERIAL REQUIRED FOR TAR
Physical Verification needed
Description
SUPPLY OF SET OF FRONT SIGHT ASSY AS PER 4 DRG No K 1023 K 1031 K 1032 K 1033 WITH FIRMS MATERIAL REQUIRED FOR TAR
Specification
SUPPLY OF SET OF FRONT SIGHT ASSY AS PER 4 DRG No K 1023 K 1031 K 1032 K 1033 WITH FIRMS MATERIAL REQUIRED FOR TAR
Drawing no.
K-1023 K 1031 K 1032 K 1033
Manufacturing Technology
AS PER 4 DRG No K 1023 K 1031 K 1032 K 1033
Testing / Inspection Facility
AS PER 4 DRG No K 1023 K 1031 K 1032 K 1033
70
18750
Set
SUPPLY OF FRONT SIGHT AS PER DRG No K 1022 WITH FIRMS MATERIAL REQUIRED FOR TAR
Physical Verification needed
Description
SUPPLY OF FRONT SIGHT AS PER DRG No K 1022 WITH FIRMS MATERIAL REQUIRED FOR TAR
Specification
SUPPLY OF FRONT SIGHT AS PER DRG No K 1022 WITH FIRMS MATERIAL REQUIRED FOR TAR
Testing / Inspection Facility
70
18750
Number
1207
EOI/PROVISIONAL/REGULARIZATION
Ordnance Equipment Factory
The General Manager,
Kanpur
Kanpur
Kanpur, Uttar Pradesh
208001
Name
Code
Quantity
Approx Value
Select
BUCKLE BRASS QR 19 MM MALE AND FEMALE
Description
BUCKLE BRASS QR 19 MM MALE & FEMALE
Specification
SPECN. NO. CQA(GS)/US/324 EXCEPT THAT MATL. WILL BE BRS. INSTEAD OF ALU.
i) MATERIAL FOR BUCKLE BRASS TO BE Cu Zn 30 (70:30) AS PER IS: 410-1991 (HARD TEMPERED)
ii) BUCLE SHALL BE PRODUCED BY STAMPING.
iii) BUCLE SHALL BE NICKEL CROME PLATE Cu/Ni 25 b Cr.r. As IS: 1068-1993
iv) BUCKLE TO BE FREE FROM SURFACE IRREGULARITIES & SHARP EDGES.
Testing / Inspection Facility
21
AS PER TENDER
Set
PRESS BUTTON BRASS NICKLE COATED 10 MM
Description
PRESS BUTTON BRASS NICKLE COATED 10 MM
Testing / Inspection Facility
21
AS PER TENDER
Set
PRESS BUTTON BRASS NICKLE COATED 15 MM
Description
PRESS BUTTON BRASS NICKLE COATED 15 MM
Specification
AS PER SPECIFICATION
Testing / Inspection Facility
21
AS PER TENDER
Set
PRESS BUTTON BRASS NICKLE COATED 10 MM
Description
PRESS BUTTON BRASS NICKLE COATED 10 MM
Testing / Inspection Facility
21
AS PER TENDER
Ample
BUCKLE BRASS QR 19 MM MALE AND FEMALE
Description
BUCKLE BRASS QR 19 MM MALE & FEMALE
Specification
SPECN. NO. CQA(GS)/US/324 EXCEPT THAT MATL. WILL BE BRS. INSTEAD OF ALU.
i) MATERIAL FOR BUCKLE BRASS TO BE Cu Zn 30 (70:30) AS PER IS: 410-1991 (HARD TEMPERED)
ii) BUCLE SHALL BE PRODUCED BY STAMPING.
iii) BUCLE SHALL BE NICKEL CROME PLATE Cu/Ni 25 b Cr.r. As IS: 1068-1993
iv) BUCKLE TO BE FREE FROM SURFACE IRREGULARITIES & SHARP EDGES.
Testing / Inspection Facility
21
AS PER TENDER
Set
WHEEL GEAR RH TO LF 3906401104
Physical Verification needed
Description
WHEEL GEAR RH TO DRG. No. 175.40.004/F
Specification
GOST 4543-71
Testing / Inspection Facility
39
165
Number
CASTING CASE TO LF 3806211057
Physical Verification needed
Description
CASTING CASE TO DRG NO: 172.28.002-1/C
Specification
GOST 2685-75
Drawing no.
172.28.002-1/C
Testing / Inspection Facility
38
37
Number
BRACKET LH TO LF 3801063042
Physical Verification needed
Description
BRACKET LH TO DRG NO: 175.63.037-A/C
Specification
GOST 977 - 88
Drawing no.
175.63.037-A/C
Testing / Inspection Facility
38
89
Number
1208
OFK/2019/05/IV/3
Ordnance Factory Khamaria
The Cheif General Manager
Khamaria
Khamaria
Madhya Pradesh
482005
Name
Code
Quantity
Approx Value
Select
CARTG CLIP FOR 76 62 SRGM LF 9911357314
Description
CARTG. CLIP ASSY TO DRG.NO. TRD-2-1-1992.
Specification
CARTG. CLIP ASSY TO DRG.NO. TRD-2-1-1992.
Manufacturing Technology
(I) SHEET METAL WORK
(II) PUNCHING FACILITY
(III) RIVETING FACILITY
(IV) PAINTING FACILITY
Testing / Inspection Facility
(V) RELEVANT INSPECTION AND TESTING FACILITY
99
3172
Number
Cylinder No IND 31SV 241 A LF 6575363000
Description
Cylinder No. IND- 31SV- 241 A LF 6575363000
Specification
Cylinder No. IND- 31SV- 241 A LF 6575363000
Testing / Inspection Facility
65
986
Number
WASHER AS PER DRG NO MKTA 754152 003 LF 9911358670
Description
WASHER AS PER DRG NO MKTA 754152 003 TRD 1 1 3223
Specification
WASHER AS PER DRG NO MKTA 754152 003 TRD 1 1 3223
Testing / Inspection Facility
99
24000
Number
1209
PV/OFCH/ADV REGD/JAN-20/69
Ordnance Factory Chanda
The Cheif General Manager
Chanda
Chanda
Maharashtra
442501
Name
Code
Quantity
Approx Value
Select
2255568143 TIMBER MANGO SIZE 1200 MM X 120 SIM X 25 MM
Description
TIMBER MANGO SIZE 1200 MM X 120 SIM X 25MM TO SPECN.IND/ME/883 (F) DC5452-ME DT.01/06/2016
Specification
SPECN.IND/ME/883 (F) DC5452-ME DT.01/06/2016
Manufacturing Technology
• Sawing mill
• Seasoning kiln
• Sawing mill
• Seasoning kiln
• Sawing mill
• Seasoning kiln
• Sawing mill
• Seasoning kiln
• Sawing mill
• Seasoning kiln
Testing / Inspection Facility
a) Preservative treatment
b) Moisture %
c) Ultimate transverse Strength
d) Raw material test from NABL lab as per specification IND/ME/883 (F)
a) Preservative treatment
b) Moisture %
c) Ultimate transverse Strength
d) Raw material test from NABL lab as per specification IND/ME/883 (F)
a) Preservative treatment
b) Moisture %
c) Ultimate transverse Strength
d) Raw material test from NABL lab as per specification IND/ME/883 (F)
a) Preservative treatment
b) Moisture %
c) Ultimate transverse Strength
d) Raw material test from NABL lab as per specification IND/ME/883 (F)
a) Preservative treatment
b) Moisture %
c) Ultimate transverse Strength
d) Raw material test from NABL lab as per specification IND/ME/883 (F)
22
1000
Number
2255568145 TIMBER MANGO SIZE 1200 MM X 82 MM X 28 MM
Description
TIMBER MANGO SIZE 1200 MM X 82 MM X 28MM TO SPECN.IND/ME/883 (F) DC5452-ME DT.01/06/2016
Specification
SPECN.IND/ME/883 (F) DC5452-ME DT.01/06/2016
Manufacturing Technology
• Sawing mill
• Seasoning kiln
• Sawing mill
• Seasoning kiln
• Sawing mill
• Seasoning kiln
• Sawing mill
• Seasoning kiln
• Sawing mill
• Seasoning kiln
Testing / Inspection Facility
a) Preservative treatment
b) Moisture %
c) Ultimate transverse Strength
d) Raw material test from NABL lab as per specification IND/ME/883 (F)
a) Preservative treatment
b) Moisture %
c) Ultimate transverse Strength
d) Raw material test from NABL lab as per specification IND/ME/883 (F)
a) Preservative treatment
b) Moisture %
c) Ultimate transverse Strength
d) Raw material test from NABL lab as per specification IND/ME/883 (F)
a) Preservative treatment
b) Moisture %
c) Ultimate transverse Strength
d) Raw material test from NABL lab as per specification IND/ME/883 (F)
a) Preservative treatment
b) Moisture %
c) Ultimate transverse Strength
d) Raw material test from NABL lab as per specification IND/ME/883 (F)
22
1000
Number
2255568144 TIMBER MANGO SIZE 110 MM X 110 MM X 800 MM
Description
TIMBER MANGO SIZE 110 MM X 110 MM X 800MM TO SPECN.IND/ME/883(F) DC5452-ME DT.01/06/ 2016
Specification
SPECN.IND/ME/883(F) DC5452-ME DT.01/06/ 2016
Manufacturing Technology
• Sawing mill
• Seasoning kiln
• Sawing mill
• Seasoning kiln
• Sawing mill
• Seasoning kiln
• Sawing mill
• Seasoning kiln
• Sawing mill
• Seasoning kiln
Testing / Inspection Facility
a) Preservative treatment
b) Moisture %
c) Ultimate transverse Strength
d) Raw material test from NABL lab as per specification IND/ME/883 (F)
a) Preservative treatment
b) Moisture %
c) Ultimate transverse Strength
d) Raw material test from NABL lab as per specification IND/ME/883 (F)
a) Preservative treatment
b) Moisture %
c) Ultimate transverse Strength
d) Raw material test from NABL lab as per specification IND/ME/883 (F)
a) Preservative treatment
b) Moisture %
c) Ultimate transverse Strength
d) Raw material test from NABL lab as per specification IND/ME/883 (F)
a) Preservative treatment
b) Moisture %
c) Ultimate transverse Strength
d) Raw material test from NABL lab as per specification IND/ME/883 (F)
22
1000
Number
2255568147 TIMBER MANGO SIZE 1200MM X 37MM X 80 MM
Description
TIMBER MANGO SIZE 1200MM X 37MM X 80MM TO SPECN.IND/ME/883(F) DC5452-ME DT.01/06/2016
Specification
SPECN.IND/ME/883(F) DC5452-ME DT.01/06/2016
Manufacturing Technology
• Sawing mill
• Seasoning kiln
• Sawing mill
• Seasoning kiln
• Sawing mill
• Seasoning kiln
• Sawing mill
• Seasoning kiln
• Sawing mill
• Seasoning kiln
Testing / Inspection Facility
a) Preservative treatment
b) Moisture %
c) Ultimate transverse Strength
d) Raw material test from NABL lab as per specification IND/ME/883 (F)
a) Preservative treatment
b) Moisture %
c) Ultimate transverse Strength
d) Raw material test from NABL lab as per specification IND/ME/883 (F)
a) Preservative treatment
b) Moisture %
c) Ultimate transverse Strength
d) Raw material test from NABL lab as per specification IND/ME/883 (F)
a) Preservative treatment
b) Moisture %
c) Ultimate transverse Strength
d) Raw material test from NABL lab as per specification IND/ME/883 (F)
a) Preservative treatment
b) Moisture %
c) Ultimate transverse Strength
d) Raw material test from NABL lab as per specification IND/ME/883 (F)
22
1000
Number
2255568146 TIMBER MANGO SIZE 1000MM X 37MM X 110 MM
Description
TIMBER MANGO SIZE 1000MM X 37MM X 110MM TO SPECN.IND/ME/883(F) DC5452-ME DT.01/06/2016
Specification
SPECN.IND/ME/883(F) DC5452-ME DT.01/06/2016
Manufacturing Technology
Sawing mill
Seasoning kiln
Sawing mill
Seasoning kiln
Sawing mill
Seasoning kiln
Sawing mill
Seasoning kiln
Sawing mill
Seasoning kiln
Testing / Inspection Facility
a) Preservative treatment
b) Moisture %
c) Ultimate transverse strength
d) Raw material test from NABL lab as per specification IND/ME/883 (F)
a) Preservative treatment
b) Moisture %
c) Ultimate transverse strength
d) Raw material test from NABL lab as per specification IND/ME/883 (F)
a) Preservative treatment
b) Moisture %
c) Ultimate transverse strength
d) Raw material test from NABL lab as per specification IND/ME/883 (F)
a) Preservative treatment
b) Moisture %
c) Ultimate transverse strength
d) Raw material test from NABL lab as per specification IND/ME/883 (F)
a) Preservative treatment
b) Moisture %
c) Ultimate transverse strength
d) Raw material test from NABL lab as per specification IND/ME/883 (F)
22
1000
Number
1210
OFBL/ADV/33/STRAP TO DRG
Ordnance Factory Bolangir
The Cheif General Manager
Bolangir
Bolangir
Orissa
767770
Name
Code
Quantity
Approx Value
Select
SHELL BODY WITH DRIVING BAND 107 TO DRG NO 3060202 DC 36490 A DTD19 11 1998
Description
SHELL BODY WITH DRIVING BAND 107 TO DRG.NO. 3060202, DC:36490-A DTD.19.11.1998 AND SURFACE TREATED AS PER DRG.NO.3060203 DC-36490-A DTD.19.11.1998,EXTERNALLY PAINTED AS PER DRG NO. 6374 058 DC NO. 37586-A DT. 22.07.21 WITH PAINT RFU FINISHING STOVING AMMN. SC FINISH SPRAYING MIDDLE BUFF (ISC-359 OF IS-5-1978) TO SPEC. JSS-8010-12 INTERNALLY OIL SEALED WITH LIFTING PLUG TO DRG.NO.5191856 DC NO: 37595-A DT.08.12.21 AND GASKET TO DRG.NO.6391043 DC: 36695-A DTD. 08.08.2000. LOOSELY FITTED.
Specification
SHELL BODY WITH DRIVING BAND 107 TO DRG.NO. 3060202, DC:36490-A DTD.19.11.1998 AND SURFACE TREATED AS PER DRG.NO.3060203 DC-36490-A DTD.19.11.1998,EXTERNALLY PAINTED AS PER DRG NO. 6374 058 DC NO. 37586-A DT. 22.07.21 WITH PAINT RFU FINISHING STOVING AMMN. SC FINISH SPRAYING MIDDLE BUFF (ISC-359 OF IS-5-1978) TO SPEC. JSS-8010-12 INTERNALLY OIL SEALED WITH LIFTING PLUG TO DRG.NO.5191856 DC NO: 37595-A DT.08.12.21 AND GASKET TO DRG.NO.6391043 DC: 36695-A DTD. 08.08.2000. LOOSELY FITTED.
Manufacturing Technology
FACILITY FOR FORGING , FACILITY FOR NOSING OPERATION , FACILITY FOR BAND PRESSING , FACILITY FOR ARC WELDING , FACILITY FOR MACHINING
SHEAR CUTTING MACHINE FOR CUTTING BILLETS,INDUCTION FURNACE FOR HEATING OF BILLETS,MANUFACTURING FACILITY OR TIE-UP/MOU FOR OIL SEALED WITH LIFTING PLUG AND GASKET
Testing / Inspection Facility
SUITABLE TESTING & MEASURING FACILITY ,ULTRASONIC TESTING/X-RAY FACILITY OR TIE-UP/MOU FOR EMPTYSHELL
ULTRASONIC TESTING/X-RAY FACILITY OR TIE-UP/MOU FOR EMPTYSHELL
62
10000
Number
6570250318 PACKING FITMENT FOAM SIZE 938 X 170X 13 MM
Description
PACKING FITMENT FOAM SIZE-938 X 170X
13 MM DET 2 QTY 2 NO 845 X 170X 12 MM DET 3 QTY 2 NO 938X320X13 MM DET 1 QTY 2 NO 280X170X6 MM DET 2 QTY 1 TO SPECN CROSS LINK POLYTHENE FOAM DENSITY 60-80 KG/M3 FOAM & DRG NO ARDE-1249 1ST 4 PKG & ARDE-
1250 LAST 2 PKG.
Specification
SPECN CROSS LINK POLYTHENE FOAM DENSITY 60-80 KG/M3 FOAM
1250 LAST 2 PKG.
Drawing no.
DRG NO ARDE-1249 1ST 4 PKG & ARDE- 1250 LAST 2 PKG
Manufacturing Technology
Sizing/Cutting
Sizing/Cutting
Sizing/Cutting
Sizing/Cutting
Sizing/Cutting
Testing / Inspection Facility
e) Raw material foam test from NABL lab
as per specification IND/ME/1023 (Prov)
f) General purpose engineering
equipment's like Vernier, scale, tape
etc. to measure dimensions
e) Raw material foam test from NABL lab
as per specification IND/ME/1023 (Prov)
f) General purpose engineering
equipment's like Vernier, scale, tape
etc. to measure dimensions
e) Raw material foam test from NABL lab
as per specification IND/ME/1023 (Prov)
f) General purpose engineering
equipment's like Vernier, scale, tape
etc. to measure dimensions
e) Raw material foam test from NABL lab
as per specification IND/ME/1023 (Prov)
f) General purpose engineering
equipment's like Vernier, scale, tape
etc. to measure dimensions
e) Raw material foam test from NABL lab
as per specification IND/ME/1023 (Prov)
f) General purpose engineering
equipment's like Vernier, scale, tape
etc. to measure dimensions
65
1157
Set
6334401041 BLACK CUSHION FOR HDC1 TO DRG NO HEMRL MICS SK NO 1470
Description
BLACK CUSHION FOR HDC-1 TO DRG NO
HEMRL MICS SK NO 1470 ( CUSHION-1 DET NO3 QTY NO 02 NOS CUSHION-II DET NO.5 QTY 04 NOS CUSHION III DET NO 6 QTY 04 NOS) MAT- EXPANDED CROSS LINKED POLYETHENE FOAM TO SPECN IND/ME/1023 (PROV) AS PER SPECN
COLOUR SHOULD BE BLACK
Specification
SPECN IND/ME/1023 (PROV)
Drawing no.
DRG NO HEMRL MICS SK NO 1470
Manufacturing Technology
Sizing/Cutting
Sizing/Cutting
Sizing/Cutting
Sizing/Cutting
Sizing/Cutting
Testing / Inspection Facility
c) Raw material foam test from NABLlab
as per specification IND/ME/1023 (Prov)
d) General purpose engineering equipment's like Vernier, scale, tape etc. to measure dimensions
c) Raw material foam test from NABLlab
as per specification IND/ME/1023 (Prov)
d) General purpose engineering equipment's like Vernier, scale, tape etc. to measure dimensions
c) Raw material foam test from NABLlab
as per specification IND/ME/1023 (Prov)
d) General purpose engineering equipment's like Vernier, scale, tape etc. to measure dimensions
c) Raw material foam test from NABLlab
as per specification IND/ME/1023 (Prov)
d) General purpose engineering equipment's like Vernier, scale, tape etc. to measure dimensions
c) Raw material foam test from NABLlab
as per specification IND/ME/1023 (Prov)
d) General purpose engineering equipment's like Vernier, scale, tape etc. to measure dimensions
63
1157
Set
LUG SUSPENSION NO 243 AND THRUSTER PLATE MACHINED L F NO 6250700173
Description
LUG SUSPENSION NO. 243 AND THRUSTER PLATE (MACHINED).
Specification
LUG SUSPENSION NO. 243 AND THRUSTER PLATE (MACHINED). AS PER DRAWING NUMBER ARM 1461D. (R. NO. 2, DATED 05/10/01)
Drawing no.
AS PER DRAWING NUMBER ARM 1461D. (R. NO. 2, DATED 05/10/01)
Manufacturing Technology
1.Forging Hammer (min 1 ton) of adequate capacity 2.Milling Machine
Testing / Inspection Facility
1.Chemical testing facility.
2.Mechanical testing facility (UTS,YS,
elongation, hardness,impact).
3.Fatigue testing
4.Grainflow pattern testing
62
1539
Number
1211
2019000155
Ordnance Factory Dehu Road
The Cheif General Manager
Dehu Road
Dehu Road
Maharashtra
412101
Name
Code
Quantity
Approx Value
Select
PLUG FOR 81MM AT AL
Description
PLUG FOR 81MM AT-AL TO DRG NO 902.01.401 DC NO 17988 W DTD 20/06/1994
Specification
DRG NO 902.01.401 DC NO 17988 W DTD 20/06/1994
Testing / Inspection Facility
62
45300
Number
1212
3193000956
Small Arms Factory
The General Manager,
Kanpur
Kanpur
Kanpur, Uttar Pradesh
208009
Name
Code
Quantity
Approx Value
Select
CLOSING CUP DRG NO 0204 03 04 00 03 001 00DA
Physical Verification needed
Description
CLOSING CUP DRG. NO. 0204 03 04 00 03 001 00DA.
Specification
CLOSING CUP DRG. NO. 0204 03 04 00 03 001 00DA.
Drawing no.
0204 03 04 00 03 001 00DA
Testing / Inspection Facility
1) Chemical & Mechanical properties as per std. given drawing /Specification.
2) Dimensional inspection for all dimension given in the drawing & other parameter which are mentioned in relevant drawing/specification.
70
468
Number
BODY HOUSING UPPER WELDING FOR JVPC
Description
BODY HOUSING UPPER WELDING FOR JVPC 5.56 X 30MM WITH BRACKET FRONT AND BRACKET REAR DRG NO. SK-5729*2 CONSISTING OF BODY HOUSING UPPER, CHANNEL LEFT, CHANNEL RIGHT, TUBE SPACER,BRACKET FRONT AND BRACKET REAR, BODY HOUSING UPPER
Specification
BODY HOUSING UPPER WELDING FOR JVPC 5.56 X 30MM WITH BRACKET FRONT AND BRACKET REAR DRG NO. SK-5729*2 CONSISTING OF BODY HOUSING UPPER, CHANNEL LEFT, CHANNEL RIGHT, TUBE SPACER,BRACKET FRONT AND BRACKET REAR, BODY HOUSING UPPER
Drawing no.
BODY HOUSING UPPER WELDING FOR JVPC 5.56 X 30MM WITH BRACKET FRONT AND BRACKET REAR DRG NO. SK-5729*2 CONSISTING OF BODY HOUSING UPPER, CHANNEL LEFT, CHANNEL RIGHT, TUBE SPACER,BRACKET FRONT AND BRACKET REAR, BODY HOUSING UPPER
Manufacturing Technology
Forming & Machining, Machining, Machining or MIM Route, Tig Welding and assy.
Testing / Inspection Facility
1) Chemical & Mechanical properties as per std. given drawing.
2) Dimensional inspection, for all dimensions given in the drawings & other parameter which are mentioned in relevant drawings.
70
227
Number
9081008304 BOOSTER LEAD FOR DHANUSH GUN TO DRG NO GCF 50 41023
Physical Verification needed
Description
9081008304 BOOSTER LEAD FOR DHANUSH GUN TO DRG NO GCF/50/41023
Specification
9081008304 BOOSTER LEAD FOR DHANUSH GUN TO DRG NO GCF/50/41023
Testing / Inspection Facility
90
39
Number
9081008366 EXHAUST HOSE COVER TO DRAWING NO GCF 50 41121
Physical Verification needed
Description
9081008366 EXHAUST HOSE COVER TO DRAWING NO GCF/50/41121
Specification
9081008366 EXHAUST HOSE COVER TO DRAWING NO GCF/50/41121
Testing / Inspection Facility
90
62
Number
Tape Nylon 19 mm BS 1785 N Red
Description
Tape Nylon 19 mm BS 1785 N Red
Specification
ADRDE/QMS/TGTE/T/2022/03 dtd. 13.01.2022.
Manufacturing Technology
As per Specification/Drawing
Testing / Inspection Facility
As per Specification/Drawing
2101221438
2
Metre
Tape Nylon 38 mm BS 3787 N 386 Kgf SG
Description
Tape Nylon 38 mm BS 3787 N (386 Kgf) SG
Specification
ADRDE/QMS/TGTE/T/2022/04 dtd. 13.01.2022
Manufacturing Technology
As per Specification/Drawing
Testing / Inspection Facility
As per Specification/Drawing
2101221433
102
Metre
Tape Nylon 38 mm BS 3787 N 386 Kgf Black
Description
Tape Nylon 38 mm BS 3787 N (386 Kgf) Black
Specification
ADRDE/QMS/TGTE/T/2022/04 dtd. 13.01.2022
Manufacturing Technology
As per Specification/Drawing
Testing / Inspection Facility
As per Specification/Drawing
2101221431
36
Metre
Tape Nylon 10 mm BS 893 N 91 Kgf SG
Description
Tape Nylon 10 mm BS 893 N (91 Kgf) SG
Specification
ADRDE/QMS/TGTE/T/2022/01 dtd. 13.01.2022
Manufacturing Technology
As per Specification/Drawing
Testing / Inspection Facility
As per Specification/Drawing
2101221429
432
Metre
Cypres Cordage Braided Cordage coreless Dyneema BS 1815 185 Kgf UD
Description
Cypres Cordage/Braided Cordage, coreless, Dyneema, BS 1815 (185 Kgf) UD
Specification
ADRDE/QMS/TGTE/C/2021/01/(a) dtd. 13.01.2022
Manufacturing Technology
As per Specification/Drawing
Testing / Inspection Facility
As per Specification/Drawing
2101221446
24
Metre