MIL Vendor Panel

Warning!

You need to have JavaScript enabled to use this site.

Facility to apply for multiple items against multiple advertisement introduced. For details Click here || For any system/application related issues, please send the details of the issue to mail id: ofb.support@in.experis.com with a copy to the OFB mail id : ofbqcvrcell.ofb@ofb.gov.in

Items open for Registration

Search

Reset

Advertisement No.

Factory

Location

Items

961

EOI/PROVISIONAL/REGULARIZATION

Ordnance Equipment Factory

The General Manager,
Kanpur
Kanpur
Kanpur, Uttar Pradesh
208001

Name	Code	Quantity	Approx Value	Select
FABRIC COTTON CLOSELY WOVEN 237 GMS SCOURED WIDTH 140 CM PLUS 2 MINUS 0 Description ITEM: FABRIC COTTON CLOSELY WOVEN 237 GMS SCOURED WIDTH 140 CM (+2, -0) Specification JSS:8305-5 (ALL PARAMETERS EXCEPT MASS, MASS (GMS) MUST BE 237 +-5% ) Drawing no. Manufacturing Technology AS PER SPECIFICATION Item_with_Specification_2.pdf Testing / Inspection Facility AS PER SPECIFICATION	20	AS PER TENDER Metre

962

HVF/TE0102190209/2019-20/TA/CBOI/SD-OTE dt 03/02/2020

Heavy Vehicle Factory

The Sr.General Manager,
Avadi
Avadi
Avadi, Tamil Nadu
600054

Name	Code	Quantity
EPICYCLE OF TRAIN IV 246 Physical Verification needed Description EPICYCLE OF TRAIN IV 172.40.246 Specification EPICYCLE OF TRAIN IV 172.40.246 Drawing no. Manufacturing Technology AS PER VQC ATTACHED EPICYCLE_VRRF.pdf Testing / Inspection Facility AS PER VQC ATTACHED	62	128 Number
BOOSTER 270 Physical Verification needed Description BOOSTER 175.40.270 Specification BOOSTER 175.40.270 (6206401096) Drawing no. Manufacturing Technology FORGING DRG IS 172.40.270-1/F IS COMMON FOR BOTH BOOSTER 172.40.270 AND 172.40.270-1. AS PER VQC ATTACHED booster_270_qap_vqc.pdf Testing / Inspection Facility AS PER VQC ATTACHED	62	167 Number
STOP 6206211073 Physical Verification needed Description STOP 6206211073 Specification STOP 6206211073 Drawing no. 172.28.022-2 MERGED_DRAWINGS_compressed_(2).pdf Manufacturing Technology AS PER VQC VQC007_-_Copy.pdf Testing / Inspection Facility AS PER QAP	62	300 Number
FLANGE 6201021085 Physical Verification needed Description FLANGE 6201021085 Specification FLANGE 6201021085 Drawing no. 188.21.108 MERGED_DRAWINGS_compressed_(2).pdf Manufacturing Technology AS PER VQC VQC007_-_Copy.pdf Testing / Inspection Facility AS PER QAP	62	100 Number
BOSS 6206211194 Physical Verification needed Description BOSS 6206211194 Specification BOSS 6206211194 Drawing no. 172.18.009B MERGED_DRAWINGS_compressed_(2).pdf Manufacturing Technology AS PER VQC VQC007_-_Copy.pdf Testing / Inspection Facility AS PER QAP	62	200 Number
BRACKET 6206211079 Physical Verification needed Description BRACKET 6206211079 Specification BRACKET 6206211079 Drawing no. 172.28.030-1A MERGED_DRAWINGS_compressed_(2).pdf Manufacturing Technology AS PER VQC VQC007_-_Copy.pdf Testing / Inspection Facility AS PER QAP	62	100 Number
SCREW CAP 6206419163 Physical Verification needed Description SCREW CAP 6206419163 Specification SCREW CAP 6206419163 Drawing no. 175.63.053 MERGED_DRAWINGS_compressed_(2).pdf Manufacturing Technology AS PER VQC VQC007_-_Copy.pdf Testing / Inspection Facility AS PER QAP	62	300 Number
FORK 6201218044 Physical Verification needed Description FORK 6201218044 Specification FORK 6201218044 Drawing no. 185.18.049 MERGED_DRAWINGS_compressed_(2).pdf Manufacturing Technology AS PER VQC VQC007_-_Copy.pdf Testing / Inspection Facility AS PER QAP	62	100 Number
LEVER 6201218045 Physical Verification needed Description LEVER 6201218045 Specification LEVER 6201218045 Drawing no. 185.18.050 MERGED_DRAWINGS_compressed_(2).pdf Manufacturing Technology AS PER VQC VQC007_-_Copy.pdf Testing / Inspection Facility AS PER QAP	62	100 Number
LEVER 6206420078 Physical Verification needed Description LEVER 6206420078 Specification LEVER 6206420078 Drawing no. 172.64.046 MERGED_DRAWINGS_compressed_(2).pdf Manufacturing Technology AS PER VQC VQC007_-_Copy.pdf Testing / Inspection Facility AS PER QAP	62	100 Number
LEVER 6206102338 Physical Verification needed Description LEVER 6206102338 Specification LEVER 6206102338 Drawing no. 175.02.220-1 MERGED_DRAWINGS_compressed_(2).pdf Manufacturing Technology AS PER VQC VQC007_-_Copy.pdf Testing / Inspection Facility AS PER QAP	62	100 Number
LEVER 6201218043 Physical Verification needed Description LEVER 6201218043 Specification LEVER 6201218043 Drawing no. 185.18.048 MERGED_DRAWINGS_compressed_(2).pdf Manufacturing Technology AS PER VQC VQC007_-_Copy.pdf Testing / Inspection Facility AS PER QAP	62	100 Number
SUPPORT 6201064007 Physical Verification needed Description SUPPORT 6201064007 Specification SUPPORT 6201064007 Drawing no. 175.64.008-1 MERGED_DRAWINGS_compressed_(2).pdf Manufacturing Technology AS PER VQC VQC007_-_Copy.pdf Testing / Inspection Facility AS PER QAP	62	200 Number
SUPPORT 6206102329 Physical Verification needed Description SUPPORT 6206102329 Specification SUPPORT 6206102329 Drawing no. 175.02.182-1 MERGED_DRAWINGS_compressed_(2).pdf Manufacturing Technology AS PER VQC VQC007_-_Copy.pdf Testing / Inspection Facility AS PER QAP	62	100 Number
BRACKET 6201218052 Physical Verification needed Description BRACKET 6201218052 Specification BRACKET 6201218052 Drawing no. 185.18.080 DRG_BRA.pdf Manufacturing Technology AS PER VQC VQC_BRA.pdf Testing / Inspection Facility AS PER QAP	62	100 Number
POINTER INDICATOR 6206420124 Physical Verification needed Description POINTER INDICATOR 6206420124 Specification POINTER INDICATOR 6206420124 Drawing no. 175.64.094 DRG_BRA.pdf Manufacturing Technology AS PER VQC VQC_BRA.pdf Testing / Inspection Facility AS PER QAP	62	100 Number
RH EJECTION DUCT ASSY 6206801088 Physical Verification needed Description RH EJECTION DUC ASSY 6206801088 Specification RH EJECTION DUC ASSY 6206801088 Drawing no. 175.01.144SB DRG_BRA.pdf Manufacturing Technology AS PER VQC VQC_BRA.pdf Testing / Inspection Facility AS PER QAP	62	100 Number
FORK 6201021026 Physical Verification needed Description FORK 6201021026 Specification FORK 6201021026 Drawing no. 188.21.058-1 DRG_BRA.pdf Manufacturing Technology AS PER VQC VQC_BRA.pdf Testing / Inspection Facility AS PER QAP	62	100 Number
BOSS 6206804254 Physical Verification needed Description BOSS 6206804254 Specification BOSS 6206804254 Drawing no. 175.04.341-A DRG_BRA.pdf Manufacturing Technology AS PER VQC VQC_BRA.pdf Testing / Inspection Facility AS PER QAP	62	200 Number
BUSHING 6206802051 Physical Verification needed Description BUSHING 6206802051 Specification BUSHING 6206802051 Drawing no. 172.03.079 DRG_BRA.pdf Manufacturing Technology AS PER VQC VQC_BRA.pdf Testing / Inspection Facility AS PER QAP	62	100 Number
BODY 6201218051 Physical Verification needed Description BODY 6201218051 Specification BODY 6201218051 Drawing no. 185.18.079 DRG_BRA.pdf Manufacturing Technology AS PER VQC VQC_BRA.pdf Testing / Inspection Facility AS PER QAP	62	100 Number
BRACKET 6201021066 Physical Verification needed Description BRACKET 6201021066 Specification BRACKET 6201021066 Drawing no. 188.21.030 DRG_BRA.pdf Manufacturing Technology AS PER VQC VQC_BRA.pdf Testing / Inspection Facility AS PER QAP	62	100 Number

963

TE NO 190401P2FO

Gun Carriage Factory

The General Manager,
Jabalpur
Jabalpur
Jabalpur,Madhya Pradesh
482011

Name	Code	Quantity	Approx Value	Select
9077301196 LEVER LOADING PENDULUM CAT PART NO 1147159 Physical Verification needed Description LEVER(LOADING PENDULUM) CAT PART NO.-1147159 Specification LEVER(LOADING PENDULUM) CAT PART NO.-1147159 Tender_Document_Part_A_230232H5PO.pdf Drawing no. Drawing_upload.pdf Manufacturing Technology As per tender document part A & QAP Approved_QAP_of_Loading_Pendulum_1145142.pdf Testing / Inspection Facility As per tender document part A & QAP	90	62 Number

964

MNF/BAFFLE/OFAJ

Ordnance Factory Ambajhari

The Sr.General Manager,
Ambajhari
Ambajhari
Maharashtra
440021

Name	Code	Quantity	Approx Value	Select
LOCKING NUT TO CQA A DRG NO 3 016919 DET 55 DC 37284 A DT 06 07 2011 Description LOCKING NUT TO CQA(A)”DRG NO. 3-016919 DET-55DC-37284-A DT.06.07.2011 Specification LOCKING NUT TO CQA(A)”DRG NO. 3-016919 DET-55DC-37284-A DT.06.07.2011 Drawing no. 3-016919 DET-55 DC-37284-A DET-55_LOCKING_NUT.pdf Manufacturing Technology AS PER ATTACHMENT PQ-Locking_Nut.PDF Testing / Inspection Facility AS PER ATTACHMENT	63	8349 Number

965

MPV/Welding Electrode

Vehicle Factory Jabalpur

The Sr.General Manager,
Jabalpore
Jabalpore
Madhya Pradesh
482009

Name	Code	Quantity	Approx Value	Select
Automotive Components for MPV 4X4 with Left hand drive and manual Transmission as per Annexure A Description Automotive Components for MPV 4X4 with Left hand drive and manual Transmission as per Annexure A Specification Automotive Components for MPV 4X4 with Left hand drive and manual Transmission as per Annexure A Drawing no. Manufacturing Technology As per Annexure A Annexure_A.pdf Testing / Inspection Facility As per Annexure A	90	1 Set
WIDE ANGLE MIRROR F8254500 Description WIDE ANGLE MIRROR AL PART NO. F8254500 Specification AL PART NO. F8254500 Drawing no. Manufacturing Technology As per AL PART NO. F8254500 Wide_Angle_Mirror.pdf Testing / Inspection Facility As per AL PART NO. F8254500	90	246 Number

966

128MMETT20001880

Ordnance Factory Tiruchirapalli

The General Manager,
Tiruchirapalli
Tiruchirapalli
Tamil Nadu
620016

Name	Code	Quantity
MANUFACTURE AND SUPPLY OF TRICA BOLT CARRIER BLANK AS PER DRAWING TEND 2692 STAR WITH FIRMS MATERIAL Description MANUFACTURE AND SUPPLY OF TRICA BOLT CARRIER BLANK AS PER DRAWING TEND 2692 STAR WITH FIRMS MATERIAL Specification MANUFACTURE AND SUPPLY OF TRICA BOLT CARRIER BLANK AS PER DRAWING TEND 2692 STAR WITH FIRMS MATERIAL Drawing no. TEND 2692 STAR drg.PDF Manufacturing Technology AS PER SPECIFICATION OF MANUFACTURE AND SUPPLY OF TRICA BOLT CARRIER BLANK AS PER DRAWING TEND 2692 STAR WITH FIRMS MATERIAL drg.PDF Testing / Inspection Facility AS PER SPECIFICATION OF MANUFACTURE AND SUPPLY OF TRICA BOLT CARRIER BLANK AS PER DRAWING TEND 2692 STAR WITH FIRMS MATERIAL	70	114 Number
BARREL BLANK BEFORE COLD SWAGING WITH CHAMBER DRG NO TEND 1745 star FOR 315 SPORTING RIFLE Physical Verification needed Description BARREL BLANK BEFORE COLD SWAGING WITH CHAMBER DRG NO TEND 1745 star FOR 315 SPORTING RIFLE Specification BARREL BLANK BEFORE COLD SWAGING WITH CHAMBER DRG NO TEND 1745 star FOR 315 SPORTING RIFLE Drg_TEND_1745.pdf Drawing no. TEND 1745 star Drg_TEND_1745.pdf Manufacturing Technology As per specification & Drawing Drg_TEND_1745.pdf Testing / Inspection Facility As per specification & Drawing	00	397 Number
Steel DIA 36 THROUGH ESR ROUTE AS PER SPECIFICATION ATTACHED Description Steel 36+0.5 Dia x 355mm+2 Length (ESR) to JSS:9510-06-2017 (REV.6)code Ref.B.'T1'condition, Hot Rolled, Peeled, Reeled, Softened, Hardness: 255 HB MAX. (%S+%P=0.022max)(S-0.010 &P-0.015 max, Mo:0.20-0.30 required for K-12013. Mfrd. only through Electro Slag Refining process. NMIR as per Annexure. Specification Steel 36+0.5 Dia x 355mm+2 Length (ESR) to JSS:9510-06-2017 (REV.6)code Ref.B.'T1'condition, Hot Rolled, Peeled, Reeled, Softened, Hardness: 255 HB MAX. (%S+%P=0.022max)(S-0.010 &P-0.015 max, Mo:0.20-0.30 required for K-12013. Mfrd. only through Electro Slag Refining process. NMIR as per Annexure. SPECIFICATION_FOR_ITEM_MASTER.pdf Drawing no. SPECIFICATION_FOR_ITEM_MASTER.pdf Manufacturing Technology ELECTRO SLAG REFINING PROCESS SPECIFICATION_FOR_ITEM_MASTER.pdf Testing / Inspection Facility AS PER SPECIFICATION	01	20000 KG Kilogram
9070056913 LEG SEMI TRAILER RETRACTABLE SUPPORT TO DRG NO 2590001789 Physical Verification needed Description LEG SEMI TRAILER RETRACTABLE SUPPORT TO DRG.NO. 2590-001789 Specification LEG SEMI TRAILER RETRACTABLE SUPPORT TO DRG.NO. 2590-001789 Drawing no. DRAWINGS__9070056913.pdf Manufacturing Technology As per Tender Document Part A & QAP QAP.pdf Testing / Inspection Facility As per Tender Document Part A & QAP	90	188 Number
9070056922 LEG SEMI TRAILER RETRACTABLE SUPPORT TO DS CAT NO 2590001788 Physical Verification needed Description LEG SEMI-TRAILER RETRACTABLE SUPPORT TO DS CAT NO. 2590-001788 Specification LEG SEMI-TRAILER RETRACTABLE SUPPORT TO DS CAT NO. 2590-001788 Tender_Document_Part_A.pdf Drawing no. DRAWINGS___9070056922.pdf Manufacturing Technology As per Tender Document Part A & QAP QAP.pdf Testing / Inspection Facility As per Tender Document Part A & QAP	90	215 Number

967

3193000956

Small Arms Factory

The General Manager,
Kanpur
Kanpur
Kanpur, Uttar Pradesh
208009

Name	Code	Quantity
Al Forging for Body Cover for MAG Description Al. Forging for Body Cover Drg. No. SKM-174* Specification Al. Forging for Body Cover Drg. No. SKM-174* Drawing no. Drawing_SKM-174_AL_FORGING_BODY_COVER.pdf Manufacturing Technology AS PER ATTACH DOCUMENT VRC_LODE504.pdf Testing / Inspection Facility AS PER ATTACH DOCUMENT	06	830 Number
BRACKET 6206419181 Physical Verification needed Description BRACKET 6206419181 Specification BRACKET 6206419181 Drawing no. 175.63.082 MERGED_DRAWINGS-1.pdf Manufacturing Technology AS PER VQC ITEM_NO_1_BRACKET.pdf Testing / Inspection Facility AS PER QAP	62	100 Number
CROWN GEAR OF 2ND PLANETARY GEAR SET TO LF NO 6201040042 Physical Verification needed Description CROWN GEAR OF 2ND PLANETARY GEAR SET TO DRG NO: 172.40.309 Specification DRG NO: 172.40.309 Drawing no. 172.40.309 172_40_309.pdf Manufacturing Technology AS PER VQC MERGED_VQC.pdf Testing / Inspection Facility AS PER QAP	62	100 Number
DRUM TO LF NO 6201040052 Physical Verification needed Description DRUM TO DRG NO: 172.40.319 Specification DRG NO: 172.40.319 Drawing no. 172.40.319 172_40_319.pdf Manufacturing Technology AS PER VQC MERGED_VQC.pdf Testing / Inspection Facility AS PER QAP	62	100 Number
Shaft Torsion Forging to Drg 172 51 016 F BO to LF 3906411023 Physical Verification needed Description Shaft Torsion Forging to Drg. No. 172.51.016/F(BO) to LF 3906411023 Specification GOST 4543-71 AND TY 14-1-1725-76 GOST_4543-71_Pg_1_to_67.pdf TY_14-1-1725-76.pdf Drawing no. 172.51.016/F 172_51_016-1-F.pdf Manufacturing Technology AS PER VQC VQC_TORSION_BAR.pdf Testing / Inspection Facility AS PER QAP	39	300 Number
Latch SK 6651 TE Physical Verification needed Description Latch SK- 6651/ TE Specification Latch SK- 6651/ TE Drawing_of_Latch_SK_6651_TE.pdf Drawing no. SK- 6651/ TE Drawing_of_Latch_SK_6651_TE.pdf Manufacturing Technology MIM Route MANUFACTURING_AND_TESTING_PIN_LATCH_BUTT_ASSY055.pdf Testing / Inspection Facility Chemical and mechanical properties as per std. given drawing. Dimensional inspection, for all dimensions given in the drawing and other parameter which are mentioned in relevant drawing	70	167637 Number
Pin SK 6508 TE Physical Verification needed Description Pin SK- 6508 /TE Specification Pin SK- 6508 /TE Drawing_of_PIN_SK_6508_TE052.pdf Drawing no. SK- 6508 /TE Drawing_of_PIN_SK_6508_TE052.pdf Manufacturing Technology Machining MANUFACTURING_AND_TESTING_PIN_LATCH_BUTT_ASSY055.pdf Testing / Inspection Facility Chemical and mechanical properties as per std. given drawing. Dimensional inspection, for all dimensions given in the drawing and other parameter which are mentioned in relevant drawing	70	167637 Number
Manufacture and supply of MGL Hammer Component to Drg No 30P 3061 st 2 with firm material Physical Verification needed Description Manufacture and supply of MGL Hammer Component to Drg No 30P 3061 st 2 with firm material Specification Manufacture and supply of MGL Hammer Component to Drg No 30P 3061 st 2 with firm material Drawing no. Manufacturing Technology As per OFB requirement 30P_3061_st_2_compressed.pdf Testing / Inspection Facility As per OFB requirement	70	450 Ample
Manufacture and supply of MGL Extractor before anodic coating to Drg No Tend 2252 st with firm material Physical Verification needed Description Manufacture and supply of MGL Extractor before anodic coating to Drg No Tend 2252 st with firm material Specification Manufacture and supply of MGL Extractor before anodic coating to Drg No Tend 2252 st with firm material Drawing no. Manufacturing Technology As per OFB requirement TEND_2252_ST_compressed.pdf Testing / Inspection Facility As per OFB requirement	70	450 Ample
SLEEVE TO LF6206414027 Physical Verification needed Description SLEEVE TO DRG NO: 172.54.002 Specification DRG NO: 172.54.002 Drawing no. DRG NO: 172.54.002 172_54_002.pdf Manufacturing Technology AS PER QAP QAP.pdf Testing / Inspection Facility AS PER VQC	62	69 Number
9081001426 GIRLLE ART NO 5182528 Physical Verification needed Description GIRLLE ART,NO 5182528 Specification GIRLLE ART,NO 5182528 PART_A_OF_GRILLE.pdf Drawing no. 5182528.pdf Manufacturing Technology As per Tender Document Part A & QAP QAP_OF_GRILLE-5182528.pdf Testing / Inspection Facility As per Tender Document Part A & QAP	90	26 Number
MFG and SUPPLY OF A SET OF FULLY FINISHED PINS AS PER 12 DRAWING GIVEN IN ANNEXURE REQUIRED FOR TAR Physical Verification needed Description MFG and SUPPLY OF A SET OF FULLY FINISHED PINS AS PER 12 DRAWING GIVEN IN ANNEXURE REQUIRED FOR TAR Specification MFG and SUPPLY OF A SET OF FULLY FINISHED PINS AS PER 12 DRAWING GIVEN IN ANNEXURE REQUIRED FOR TAR Drawing no. K-1011 K-1203 K-1205 K-1211 K-2003 K-2014 K-2016 K-2062 K-4006 K-4008 K-4015 K-4017 12_pin_2023-09-13-15-48-08_026c6ce119388a8126a46c327e8d800e.pdf Manufacturing Technology K-1011 K-1203 K-1205 K-1211 K-2003 K-2014 K-2016 K-2062 K-4006 K-4008 K-4015 K-4017 12_pin_2023-09-13-15-48-08_026c6ce119388a8126a46c327e8d800e.pdf Testing / Inspection Facility K-1011 K-1203 K-1205 K-1211 K-2003 K-2014 K-2016 K-2062 K-4006 K-4008 K-4015 K-4017	70	1000 Number
SHAFT TORSION FORGING TO DRG NO 172 51 016 F TO LF 3996411023 Physical Verification needed Description SHAFT TORSION FORGING TO DRG NO 172.51.016/F Specification GOST 4543-71 GOST_4543-71_Pg_1_to_67.pdf TY_14-1-1725-76.pdf Drawing no. 172.51.016/F 172_51_016_F.pdf Manufacturing Technology AS PER VQC VQC_172_51_016_F_172_51_016-1_F.pdf Testing / Inspection Facility AS PER QAP	39	300 Number
9069002043 CHAIN RAISING LEFT TO DRG 4028003 Physical Verification needed Description 9069002043 CHAIN RAISING LEFT TO DRG.4028003 Specification 9069002043 CHAIN RAISING LEFT TO DRG.4028003 Drawing no. 9069002043 CHAIN RAISING LEFT TO DRG.4028003 DRG_2.pdf Manufacturing Technology 9069002043 CHAIN RAISING LEFT TO DRG.4028003 DRG_2.pdf Testing / Inspection Facility 9069002043 CHAIN RAISING LEFT TO DRG.4028003	90	8 Number
9069002037 CHAIN RAISING RIGHT TO DRG 4027315 Physical Verification needed Description 9069002037 CHAIN RAISING RIGHT TO DRG.4027315 Specification 9069002037 CHAIN RAISING RIGHT TO DRG.4027315 Drawing no. 9069002037 CHAIN RAISING RIGHT TO DRG.4027315 DRG.pdf Manufacturing Technology 9069002037 CHAIN RAISING RIGHT TO DRG.4027315 DRG.pdf Testing / Inspection Facility 9069002037 CHAIN RAISING RIGHT TO DRG.4027315	90	40 Number

968

110190301

Ordnance Parachute Factory

The General Manager,
Kanpur
Kanpur
Kanpur, Uttar Pradesh
208004

Name	Code	Quantity
RING for PP PSU 36 Description DRG.NO.-ADRDE/1458 Specification DRG.NO.-ADRDE/1458 Drawing no. DRG.NO.-ADRDE/1458 Manufacturing Technology DRG.NO.-ADRDE/1458 Ring_for_Container_PSU-36_ADRDE_1458-00.pdf Testing / Inspection Facility DRG.NO.-ADRDE/1458	2110019018	2400 Number
SLEEVE TO LF6206414027 Physical Verification needed Description SLEEVE TO DRG NO: 172.54.002 Specification DRG NO: 172.54.002 Drawing no. DRG NO: 172.54.002 172_54_002.pdf Manufacturing Technology AS PER QAP QAP.pdf Testing / Inspection Facility AS PER VQC	62	69 Number
SUN GEAR OF 4TH PLANETARY GEAR SET OPERATION 15 20 TO DRG NO 172 40 306 SMF TO LF 3951040040 Physical Verification needed Description SUN GEAR OF 4TH PLANETARY GEAR SET OPERATION 15, 20 TO DRG NO 172.40.306/SMF Specification GOST 4543-71 GOST_4543-71_Pg_1_to_67.pdf Drawing no. 172.40.306/SMF 172_40_306_SMF.pdf Manufacturing Technology AS PER VQC VQC_172_40_306_SMF.pdf Testing / Inspection Facility AS PER QAP	39	148 Number
CROWN GEAR OF 2ND PLANETARY GEAER SET OPERATION 10 20 TO DRG NO 172 40 309 SMF TO LF 3951040042 Physical Verification needed Description CROWN GEAR OF 2ND PLANETARY GEAER SET OPERATION 10, 20 TO DRG NO 172.40.309/SMF Specification GOST 4543-71 GOST_4543-71_Pg_1_to_67.pdf Drawing no. 172.40.309/SMF 172_40_309_SMF.pdf Manufacturing Technology AS PER VQC VQC_172_40_309_SMF.pdf Testing / Inspection Facility AS PER QAP	39	120 Number
CARRIER OPERATION 10 20 TO DRG NO 172 43 021 SMF TO LF 3951043011 Physical Verification needed Description CARRIER OPERATION 10 20 TO DRG. NO. 172.43.021/SMF Specification GOST 4543-71 GOST_4543-71_Pg_1_to_67.pdf Drawing no. 172.43.021/SMF 172_43_021_SMF.pdf Manufacturing Technology AS PER VQC VQC_172_43_021_SMF.pdf Testing / Inspection Facility AS PER QAP	39	194 Number
CRATE FOR PACKING OF BOAT for Boat Gemini Craft Description CRATE FOR PACKING OF BOAT, INNER DIMENSION 2.0 M X 0.8 M X 0.8 M Specification IS 1503 Drawing no. Manufacturing Technology IS 1503 Crate_for_Packing_of_Boat.pdf Testing / Inspection Facility IS 1503	9911037679	10 Number
CRATE FOR PACKING OF PLATFORM for Boat Gemini Craft Description CRATE FOR PACKING OF PLATFORM, INNER DIMENSIONS 1.0 M X 1.5 M X 0.4 M Specification IS 1503 Drawing no. Manufacturing Technology IS 1503 Crate_for_Packing_of_Platform.pdf Testing / Inspection Facility IS 1503	9911037680	10 Number
CARBON STEEL ROUND BARS TO SPECN BS 970 PT I 1983 GR 080M40 IN HOT ROLLED AND COLD DRAWN CONDITION IN STRAIGHT LENGTH OF 3 MTRS 15 PERCENT MAX SHORTS DOWN TO 2 TO 3 METRES PERMITTED SIZE 30 00 MINUS 0 052 MM DIA Description CARBON STEEL ROUND BARS. TO SPECN. BS:970-PT.I-(1983) GR.080M40 IN HOT ROLLED +COLD DRAWN CONDITION IN STRAIGHT LENGTH OF 3 MTRS. (15 % MAX SHORTS DOWN TO 2-3 METRES PERMITTED ) SIZE: 30.00 - 0.052 MM DIA. Specification CARBON STEEL ROUND BARS. TO SPECN. BS:970-PT.I-(1983) GR.080M40 IN HOT ROLLED +COLD DRAWN CONDITION IN STRAIGHT LENGTH OF 3 MTRS. (15 % MAX SHORTS DOWN TO 2-3 METRES PERMITTED ) SIZE: 30.00 - 0.052 MM DIA. Drawing no. Manufacturing Technology AS PER ATTACHMENT PQ-_30_mm.PDF Testing / Inspection Facility AS PER ATTACHMENT	01	2399 Kilogram
Pistol Grip Box assembly SK 6649 TE Physical Verification needed Description Pistol Grip Box assembly SK- 6649/ TE Specification Pistol Grip Box assembly SK- 6649/ TE pistol_grip_SK-6649.pdf Drawing no. SK- 6649/ TE pistol_grip_SK-6649.pdf Manufacturing Technology Metal forming, Machining and Moulding manufacturing_data_and_testing042.pdf Testing / Inspection Facility Chemical and mechanical properties as per std. given drawing. Dimensional inspection, for all dimensions given in the drawing and other parameter which are mentioned in relevant drawing	70	167637 Number
Fore End assembly SK 6647 TE Physical Verification needed Description Fore End assembly SK -6647/ TE Specification Fore End assembly SK -6647/ TE fore_end_assy_SK-6647.pdf Drawing no. SK -6647/ TE fore_end_assy_SK-6647.pdf Manufacturing Technology Metal Forming, Machining and Moulding manufacturing_data_and_testing042.pdf Testing / Inspection Facility Chemical and mechanical properties as per std. given drawing. Dimensional inspection, for all dimensions given in the drawing and other parameter which are mentioned in relevant drawing	70	167637 Number
Pistol Grip Assembly SK 6646 TE Physical Verification needed Description Pistol Grip Assembly SK-6646/ TE Specification Pistol Grip Assembly SK-6646/ TE pistol_grip_assy_SK-_6646.pdf Drawing no. SK-6646/ TE pistol_grip_assy_SK-_6646.pdf Manufacturing Technology Metal Forming, Machining & Moulding manufacturing_data_and_testing042.pdf Testing / Inspection Facility Chemical and mechanical properties as per std. given drawing. Dimensional inspection, for all dimensions given in the drawing and other parameter which are mentioned in relevant drawing	70	167637 Number

969

ORDFYS/EFA/DAVP/01/2019/AVR/06-2(2)

Engine Factory Avadi

Chennai
Chennai
Chennai
Chennai, Tamil Nadu
600054

Name	Code	Quantity
ASSY VALVE INTAKE WITH DISC LOCK CQA Physical Verification needed Description ASSY VALVE INTAKE WITH DISC LOCK TO DRG NO. CQA(HV) 506 602 E Specification AS PER PQC,QAP, DRAWING AND ITEM SPECIFICATION PQC_ASSY_VALVE_INTAKE_WITH_DISC_LOCK_506-602E.pdf Drawing no. CQA(HV) 506 602 E AVR-12_ADVERTISEMENT _FEE_PAYMENT_INSTRUCTION_.pdf AVR-12_FEE.pdf DRG_ASSY_VALVE_INTAKE_WITH_DISC_LOCK_506-602E.pdf Manufacturing Technology AS PER PQC,QAP, DRAWING AND ITEM SPECIFICATION PQC_ASSY_VALVE_INTAKE_WITH_DISC_LOCK_506-602E.pdf QAP_ASSY_VALVE_INTAKE_WITH_DISC_LOCK_506-602E.pdf Testing / Inspection Facility AS PER PQC,QAP, DRAWING AND ITEM SPECIFICATION	62	1686 Number
TRACK ASSEMBLY TO 6206415001 Physical Verification needed Description TRACK ASSEMBLY TO DRG NO. 613.44.22CB-D1 Specification TRACK ASSEMBLY TO DRG NO. 613.44.22CB-D1 Drawing no. 613.44.22CB-D1 Manufacturing Technology ATTACHED LIST_OF_PM.pdf LIST_OF_TESTING.pdf UNDERTAKING_FOR_CORRECTNESS.pdf UNDERTAKING_FOR_INSPECTION.pdf Testing / Inspection Facility ATTACHED	62	36 Number
PRE CUP COMPONENT ANNEALED BLANK FOR 125 MM SCCC BASE TO OFAJ DRG NO CC 471 F Description PRE CUP COMPONENT (ANNEALED BLANK) FOR 125 MM SCCC (BASE) TO OFAJ DRG. NO. CC-471 F. Specification PRE CUP COMPONENT (ANNEALED BLANK) FOR 125 MM SCCC (BASE) TO OFAJ DRG. NO. CC-471 F. Drawing no. CC-471 F CC-471_F_compressed.pdf Manufacturing Technology AS PER ATTACHMENT PQ-PRE_CUP.PDF Testing / Inspection Facility AS PER ATTACHMENT	01	5797 Number
HIGH GRADE MILD KILLED STEEL PLATE OF GRADE 11 IOA TO SPECN GOST B 19032 73 OR IOF 2503 DEOXIDIZED BY ALUMINIUM WITH CHEMICAL COMPOSITION AS PER DRG NO CC 548 WITH SIZE 23 PLUS 2 MM THICK X 286 PLUS 5 MM WIDTH X 1430 PLUS 100 MM LENGTH Description HIGH GRADE MILD KILLED STEEL PLATE OF GRADE 11 IOA TO SPECN. GOST B 19032 -73 OR IOF 2503, DEOXIDIZED BY ALUMINIUM WITH CHEMICAL COMPOSITION AS PER DRG. NO CC-548 WITH SIZE 23 +2 MM THICK X 286+ 5 MM WIDTH X 1430 +100 MM LENGTH. Specification HIGH GRADE MILD KILLED STEEL PLATE OF GRADE 11 IOA TO SPECN. GOST B 19032 -73 OR IOF 2503, DEOXIDIZED BY ALUMINIUM WITH CHEMICAL COMPOSITION AS PER DRG. NO CC-548 WITH SIZE 23 +2 MM THICK X 286+ 5 MM WIDTH X 1430 +100 MM LENGTH. Drawing no. CC-548 CC-548.jpg Manufacturing Technology AS PER ATTACHMENT PQC_23mm_plate.PDF Testing / Inspection Facility AS PER ATTACHMENT	01	7080 Kilogram
NORMALISED AND PEELED CARBON STEEL ROUND BAR TO SPECN BS 970 PT I 1983 GRADE 080M40 HAVING GRAIN SIZE 5 TO 8 IZOD IMPACTVALUE 20 340 NM MIN IN STRAIGHT LENGTH OF 2 MTRS 15 PERCENT SHORTS DOWN TO 1 5 TO 2 METERS PERMITTED SIZE 41 0 1 MM DIA Description NORMALISED AND PEELED CARBON STEEL ROUND BAR TO SPECN.BS-970 PT-I-1983. GRADE 080M40 HAVING GRAIN SIZE 5 TO 8.IZOD IMPACTVALUE 20.340 NM MIN. IN STRAIGHT LENGTH OF 2 MTRS. 15% SHORTS DOWN TO 1.5 TO 2.0 METERS. PERMITTED SIZE: 41.00- 0.1 MM DIA Specification NORMALISED AND PEELED CARBON STEEL ROUND BAR TO SPECN.BS-970 PT-I-1983. GRADE 080M40 HAVING GRAIN SIZE 5 TO 8.IZOD IMPACTVALUE 20.340 NM MIN. IN STRAIGHT LENGTH OF 2 MTRS. 15% SHORTS DOWN TO 1.5 TO 2.0 METERS. PERMITTED SIZE: 41.00- 0.1 MM DIA QMI_41_MM.pdf Drawing no. Manufacturing Technology AS PER QMI PQC.PDF Testing / Inspection Facility AS PER QMI	01	7328 Kilogram
Bracket Bipod drg no 1005 000061 for LMG 5 56mm Description AS PER DRG. Specification AS PER DRG. Drawing no. Bracket_Bipod_drawing.pdf Manufacturing Technology As per attached drawing, manufacturing & testing document. Manufacturing_Technology_maching.pdf Testing / Inspection Facility As per attached drawing, manufacturing & testing document.	70	1145 Number
CYLINDER FFE TO 6206510171 Physical Verification needed Description CYLINDER FFE TO DRG NO.172.82.054CB-B Specification CYLINDER FFE TO DRG NO.172.82.054CB-B Drawing no. 172.82.054CB-B Manufacturing Technology ATTACHED List_of_Plant_Machinery_available_in-house.pdf List_of_Testing_Inspection_facilities_available_inhouse.pdf FIRM_UNDERTAKING.pdf UNDERTAKING.pdf Testing / Inspection Facility ATTACHED	62	39 Number
Grommet with special type of washer 12mm Description Grommet with special type of washer 12mm Specification ADRDE/248(a) Grommet_with_special_washer_12_mm_drawing_no_-_ADRDE_248(a).pdf Drawing no. Grommet_with_special_washer_12_mm_drawing_no_-_ADRDE_248(a).pdf Manufacturing Technology As per drawing/Specification Grommet_with_special_washer_12_mm_drawing_no_-_ADRDE_248(a).pdf Testing / Inspection Facility As per drawing/Specification	2110019017	501 Number
End Cone Big Description As per Specification Specification Rubber EPDM Drawing no. 20 Manufacturing Technology As per Specification End_cone_big_spec.pdf Testing / Inspection Facility As per Specification	2101221507	20 Number
ALL ROUND FENDER 4 WIDE Description ALL ROUND FENDER 4" WIDE Specification As per sample , EPDM material Drawing no. Manufacturing Technology As per sample, EPDM material Specification.pdf Testing / Inspection Facility As per sample, EPDM material	9911037671	120 Metre
Carrying Handle Description Carrying Handle Specification Moulded PVC Best Trade Quality Drawing no. Manufacturing Technology Moulded PVC Best Trade Quality Item_IV.pdf Testing / Inspection Facility As per drawing/specification	9911037861	60 Number
FASTNER HOOK AND LOOP TAPE NAVY BLUE ONE SET Description FASTNER HOOK AND LOOP TAPE NAVY BLUE ONE SET CONSIST OF FOUR TAPES I) FASTNER LOOP TAPE 25 MM NAVY BLUE = 0.42 METER 2) FASTNER HOOK TAPE 25 MM NAVY BLUE = 0.08 METER 3) FASTNER LOOP TAPE 50 MM NAVY BLUE = 0.22 METER 4) FASTNER HOOK TAPE 50 MM NAVY BLUE = 0.07 METER Specification SPECN. NO. IS: 8156 (LATEST) Drawing no. Manufacturing Technology AS PER SPECIFICATION Item_with_Specification_4.pdf Testing / Inspection Facility AS PER SPECIFICATION	20	AS PER TENDER Set
PRESS BUTTON BRASS 12 MM DIA BLACK COLOUR NICKLE CHROMIUM COATED Description PRESS BUTTON BRASS 12 MM DIA BLACK COLOUR NICKLE/CHROMIUM COATED Specification AS PER IAFS 01061:2013, APPENDIX ‘B’ PAGE NO – 13, SL NO.(g) Drawing no. Manufacturing Technology AS PER SPECIFICATION Item_with_Specification_3.pdf Testing / Inspection Facility AS PER SPECIFICATION	20	AS PER TENDER Set
CORD POLYPROPYLENE 6 MM DIA BLACK COLOUR Description CORD POLYPROPYLENE 6 MM (+ 0.5, - 0) DIA BLACK COLOUR Specification AS PER IAFS 01061:2013, APPENDIX ‘B’ PAGE NO – 13, SL NO.(d) Drawing no. Manufacturing Technology AS PER SPECIFICATION Item_with_Specification_1.pdf Testing / Inspection Facility AS PER SPECIFICATION	20	AS PER TENDER Metre

970

OLF/MM-2/T-1906010031

Opto Electronic Factory

Dehradun
Dehradun
Dehradun
Dehradun, Uttaranchal
248008

Name	Code	Quantity	Approx Value	Select
HEAD REST ASSY AS PER DRAWING NO AL6548007CB LF NO7425485612 Physical Verification needed Description HEAD REST ASSY AS PER DRAWING NO AL6548007CB LF NO7425485612 Specification HEAD REST ASSY AS PER DRAWING NO AL6548007CB LF NO7425485612 Drawing no. AL6548007CB Manufacturing Technology RUBBER manufacturing_technology_files.docx Testing / Inspection Facility RUBBER	74	260 Number

971

107/028/PV(A)/EOI/19-20

Gun and Shell Factory

The General Manager,
Cossipore
Cossipore
Cossipore West Bengal
700002

Name	Code	Quantity
MACHINING OF VENTURI FOR 84MM RL MK III FROM SINGLE PIECE PYT FORGING BLANK TO VENTURI IN SEMI FINISHED CONDITION Physical Verification needed Description MACHINING OF VENTURI FOR 84MM RL MK III FROM SINGLE PIECE PYT FORGING BLANK (DRG. NO. M-10857B) TO VENTURI IN SEMI FINISHED CONDITION (DRG. NO. M-11593) Specification MACHINING OF VENTURI FOR 84MM RL MK III FROM SINGLE PIECE PYT FORGING BLANK (DRG. NO. M-10857B) TO VENTURI IN SEMI FINISHED CONDITION (DRG. NO. M-11593) Drawing no. VENTURI_DRAWING.pdf Manufacturing Technology AS PER ATTACHMENT VENTURI_PM.pdf Testing / Inspection Facility AS PER ATTACHMENT	91	1251 Number
DRIVING SHAFT OPERATION 10 TO 70 SEMI MACHINED FORGING TO DRG NO 172 40 314 SMF TO LF 3951040047 Physical Verification needed Description DRIVING SHAFT OPERATION 10 TO 70 SEMI MACHINED FORGING TO DRG. NO. 172.40.314/SMF Specification GOST 4543-71 GOST_4543-71_Pg_1_to_67.pdf Drawing no. 172.40.314/SMF 172_40_314_SMF.pdf Manufacturing Technology AS PER VQC VQC_172_40_314_SMF.pdf Testing / Inspection Facility AS PER QAP	39	363 Number
HAVERSACK MEDICAL UNIVERSAL COMPLETE Description HAVERSACK MEDICAL UNIVERSAL COMPLETE Specification IND/GS/1541 AND DRAWING NO. IND/TC/1005(G) Drawing no. Manufacturing Technology AS PER SPECIFICATION Item_with_Specification_7.pdf Testing / Inspection Facility AS PER SPECIFICATION	20	AS PER TENDER Number
FABRIC NYLON 65 GMS RIP STOP WR OG PU COATED WIDTH 160 CM Description FABRIC NYLON 65 GMS RIP STOP WR OG PU COATED WIDTH 160 CM Specification AS PER APPENDIX – A OF PROV SPEC NO S/6421/BAG SLEEPING LT WT/TC - 6 Drawing no. Manufacturing Technology AS PER SPECIFICATION Item_with_Specification_6.pdf Testing / Inspection Facility AS PER SPECIFICATION	20	AS PER TENDER Metre
SALITAH LARGE FOR TENTS COMPLETE Description SALITAH LARGE FOR TENTS COMPLETE Specification JSS – 8340 - 18 Drawing no. Manufacturing Technology AS PER SPECIFICATION Item_with_Specification_3.pdf Testing / Inspection Facility AS PER SPECIFICATION	20	AS PER TENDER Number
CLOTH COTTON 375 GMS SCOURED WR FOR CAPES 91 CMS WIDE Description CLOTH COTTON 375 GMS SCOURED WR FOR CAPES 91 CMS WIDE Specification IS:2422-1985 (REAFFIRMED 1999) WITH AMENDMENT NO.1 OF AUG., 95 AND AMENDMENT NO 2 OF NOV 95 Drawing no. Manufacturing Technology AS PER SPECIFICATION Item_with_Specification_1.pdf Testing / Inspection Facility AS PER SPECIFICATION	99	AS PER TENDER Metre
FABRIC NYLON PU COATED WATER PROOF OG 115 GSM WIDTH 180 Plus 2 CMS NO NEGATIVE TOLERANCE Description FABRIC NYLON PU COATED WATER PROOF OG 115 GSM WIDTH 180 +2 CMS NO NEGATIVE TOLERANCE Specification PROV SPECIFICATION NO S/6421/BAG SLEEPING LT WT/TC-6 Drawing no. Manufacturing Technology AS PER SPECIFICATION Item_with_Specification_2.pdf Testing / Inspection Facility AS PER SPECIFICATION	20	AS PER TENDER Metre

Proceed