As per specification

As per specification

DRAWING NO.175.91.139 CBCB

• As per specification

• As per specification

As per specification

As per specification

DRAWING NO.172.91.274 CBCB

• As per specification

• As per specification

As per specification

As per specification

DRAWING NO.54.28.633 CBCB

• As per specification

• As per specification

as per specification

as per specification

DRG.No.7388/41/PK DT.17/6/93 AND7669/PK DT.27.8.98 BOTH ARE SAME.PATTERN.NO.3326/PK DT.22/09/95 & 3781/PK DT.27/08/98 BOTH ARE SAME.

• as per specification

• as per specification

as per specification

as per specification

DRG.No.7388/40/PK DT.17/6/93 &7668/PK DT27-8-98 BOTH ARE SAME. PATTER.NO.3324/PK DT.10/09/94 & 3382/PK DT.27/08/90

• as per specification

• as per specification

as per specification

as per tender

DRG.No.7388/39/PK DT.17/6/93 *7667/PK DT 27-8-98 BOTH ARE SAME.PATTERN. NO.3323/PK DT.10/09/94 & 3383/PK DT.27/08/98

• As per tender

• as per specification

RIB CUFF 2X2 RIB KNIT IN TUBE BLACK SPECIFICATION RIB CUFF WOOL:ACRYLIC WITH POLYESTER SHEATH LYCRA FILAMENT 45:35:20 2X2 RIB KNITTED IN TUBULAR FORM BLACK IN COLOR WIDTH (DIA) 7.5 CM as per Cl 4.2 (page No 4) of Provisional specification No DMSRDE/FF&IT/2007/466/2(b)

RIB CUFF 2X2 RIB KNIT IN TUBE BLACK SPECIFICATION RIB CUFF WOOL:ACRYLIC WITH POLYESTER SHEATH LYCRA FILAMENT 45:35:20 2X2 RIB KNITTED IN TUBULAR FORM BLACK IN COLOR WIDTH (DIA) 7.5 CM as per Cl 4.2 (page No 4) of Provisional specification No DMSRDE/FF&IT/2007/466/2(b)

• AS PER ATTACHED FILE.

• AS PER ATTACHED FILE.

POLYURETHANE FOAM WITH POLYURETHANE ADHESIVE FILM MASS OF PU FOAM WITH PU ADHESIVE FILM IN MIDDLE LAYER SHALL BE KEPT AS 50g plus 5percentage OR minus 5percentage SHEET OF 190X90 cm SPECIFICATION POLYURETHANE FOAM WITH POLYURETHANE ADHESIVE FILM MASS OF PU FOAM WITH PU ADHESIVE FILM IN MIDDLE LAYER SHALL BE KEPT AS 50g plus 5percentage OR minus 5percentage SHEET OF 190X90 cm

POLYURETHANE FOAM WITH POLYURETHANE ADHESIVE FILM MASS OF PU FOAM WITH PU ADHESIVE FILM IN MIDDLE LAYER SHALL BE KEPT AS 50g plus 5percentage OR minus 5percentage SHEET OF 190X90 cm SPECIFICATION POLYURETHANE FOAM WITH POLYURETHANE ADHESIVE FILM MASS OF PU FOAM WITH PU ADHESIVE FILM IN MIDDLE LAYER SHALL BE KEPT AS 50g plus 5percentage OR minus 5percentage SHEET OF 190X90 cm

• AS PER ATTACHED FILE.

• AS PER ATTACHED FILE.

CLOTH SHIRTING ANGOLA DRAB POLYESTER WOOL BLENDED WATER AND OIL REPELLENT 260 GSM WIDTH 150 CM MIN SPECIFICATION As per Appendix VIII of Schedule No DMSRDE/CPSG/2006/8

CLOTH SHIRTING ANGOLA DRAB POLYESTER WOOL BLENDED WATER AND OIL REPELLENT 260 GSM WIDTH 150 CM MIN SPECIFICATION As per Appendix VIII of Schedule No DMSRDE/CPSG/2006/8

• AS PER ATTACHED FILE

• AS PER ATTACHED FILE

NAPPA LEATHER WATERPROOF AND WATERREPELLENT SPECIFICATION No NAPPA LEATHER WATERPROOF AND WATERREPELLENT (GREY) As per Appendix-III of Schedule No DMSRDE/CPSG/2006/3

NAPPA LEATHER WATERPROOF AND WATERREPELLENT SPECIFICATION No NAPPA LEATHER WATERPROOF AND WATERREPELLENT (GREY) As per Appendix-III of Schedule No DMSRDE/CPSG/2006/3

• AS PER ATTACHED FILE

• AS PER ATTACHED FILE

HALF COUPLING TO DRG NO 176 23 120 4 F

GOST 4543 71

176 23 120 4 F

• As per VQC

• As per QAP

CARRIER PLANET TO DRG. NO. 172.40.238/F

GOST 4543-71

172.40.238/F

• AS PER VQC

• AS PER QAP

LIFEBUOY

AS PER ATTACHED SPECN

• AS PER ATTACHED SPECN

• AS PER ATTACHED SPECN

WOODEN CRATE STYLE NO.5 CLASS A FOR HORIZONTAL POLES AND SIDE POLES INTERNAL DIMENSION: 1620MM X 300MM X 300MM (L X B X H)

Specification : IS:3071

• As per Specification

• As per Specification

M.S.PLATE OF SIZE:105MM LENGTH AND 6MM THICKNESS AS PER DRAWING

Specification : PROV. SPEC. DMSRDE/T&GS/93/407(B) AND GRADE ST-42-S OF IS:226 (DRAWING PLATE NO.5 FOR SPEC.)

• As per Specification

• As per Specification

WOODEN CRATE STYLE NO.5 CLASS A FOR HORIZONTAL INCLINED POLES AND FRONT/BACK POLES INTERNAL DIMENSION: 2350 MM X 300 MM X 250 MM (L X B X H)

IS : 3071

• As per Specification

• As per Specification

MAGAZINE TO OFAJ DRG.NO. FS-2635 B.

MAGAZINE TO OFAJ DRG.NO. FS-2635 B.

• AS PER ATTACHMENT

• AS PER ATTACHMENT

NORMALIZED AND PEELED CARBON STEEL ROUND BARS TO SPECN BS: 970 –PT-I-1983 GRADE 080M40 IN STRAIGHT LENGTH OF 2 TO 3 METERS SIZE: 21.00 -0.1 MM DIA. (10 % MAX. SHORT LENGTH OF 1.5 METRE ALLOWED

NORMALIZED AND PEELED CARBON STEEL ROUND BARS TO SPECN BS: 970 –PT-I-1983 GRADE 080M40 IN STRAIGHT LENGTH OF 2 TO 3 METERS SIZE: 21.00 -0.1 MM DIA. (10 % MAX. SHORT LENGTH OF 1.5 METRE ALLOWED

• As per attachment

• As per attachment

COIL PIPE ASSY

AS PER VQC ATTACHED

188.32.052CBCB

• AS PER VQC ATTACHED
• -
• -
• -
• -

• AS PER VQC ATTACHED
• -
• -
• -
• -

RUBBER ITEM

3M PART NO.5595

3M PART NO.5595

• RUBBER ITEM

• RUBBER ITEM

7440208443 SILVER FILLED SILICONE RUBBER 2DOT50 MM CORD IN RUNNING LENGTH RESISTANCE VALUE SHOULD BE LESS THAN 1 OHM

7440208443 SILVER FILLED SILICONE RUBBER 2DOT50 MM CORD IN RUNNING LENGTH RESISTANCE VALUE SHOULD BE LESS THAN 1 OHM

• RUBBER ITEM

• RUBBER ITEM

7440208443 SILVER FILLED SILICONE RUBBER 2DOT50 MM CORD IN RUNNING LENGTH RESISTANCE VALUE SHOULD BE LESS THAN 1 OHM

7440208443 SILVER FILLED SILICONE RUBBER 2DOT50 MM CORD IN RUNNING LENGTH RESISTANCE VALUE SHOULD BE LESS THAN 1 OHM

7440208443 SILVER FILLED SILICONE RUBBER 2DOT50 MM CORD IN RUNNING LENGTH RESISTANCE VALUE SHOULD BE LESS THAN 1 OHM

• RUBBER ITEM

• RUBBER ITEM

Graphite, Dry, Sulphur Free is required for issue of Ball powder propellant for S-A, 5.56 MM and 7.62 MM Ammunitions

Graphite, Dry, Sulphur Free as per Specification No. JSS 9620-01:2021, Revision No. 4, DC No. 6596-ME Dt. 11/11/2022 SPECIFIC GRAIN SIZE - 75 MICRON

• As per attached document

• As per attached document

O RING 3 .4 X 1.9 TO OFAJ DRG NO. FS-2774 B

O RING 3 .4 X 1.9 TO OFAJ DRG NO. FS-2774 B

• as per qmi
• a

• as per pq

Cap Housing Fore Sight for 9X19 mm Machine Pistol as per Drg. No. 2101 01 02 01 05 022 00DA

Cap Housing Fore Sight for 9X19 mm Machine Pistol as per Drg. No. 2101 01 02 01 05 022 00DA

2101 01 02 01 05 022 00DA

• As per Drawing

• As per Drawing

Screw Barrel Mount for 9X19 mm Machine Pistol as per Drg. No. 2101 01 02 01 05 004 00DA

Screw Barrel Mount for 9X19 mm Machine Pistol as per Drg. No. 2101 01 02 01 05 004 00DA

2101 01 02 01 05 004 00DA

• As per Drawing

• As per Drawing

STEEL PACKAGE FOR ONE SHELL AND ONE RESIN BASED SCCC (INSIDE LP CONTAINER)AS PER DRAWING NO. PROP/SK-845-01 AND SPECIFICATION NO. MIL-OFCH-QAP-125 MM HE EX-12-2023 (6432100312)

STEEL PACKAGE FOR ONE SHELL AND ONE RESIN BASED SCCC (INSIDE LP CONTAINER)AS PER DRAWING NO. PROP/SK-845-01 AND SPECIFICATION NO. MIL-OFCH-QAP-125 MM HE EX-12-2023 (6432100312)

DRAWING NO. PROP/SK-845-01

• List of Machinery for steel package- 1. Sheet metal working/forming machines such as presses Hydraulic & Mechanical 2. Press brake for bending operation 3. Shearing machine 4. Spot welding machine/seam welding machines of suitable capacity 5. MIG welding/arc welding 6. Powder coating plant 7. Surface treatment plant 8. Grinding machine 9. Riveting machine List of Machinery for LP Container- 1. Spiral winding machine 2. Faciulity for embossing 3. Trimming machine 4. Slitting machine 5. Foam cutting facility (antistatic polyethylene foam)

• 1. All measuring instruments 2. Air leak test facility 3. Pull of laod testing faciulity for test, handle, hing 4. Drop test vertical 5. Vibration test 6. Bounce test 7. Water immersion 8. Stacking test 9. Lifting test 10. Salt spray test

LIFEJACKET

AS PER ATTACHED SPECN

• AS PER ATTACHED SPECN

• AS PER ATTACHED SPECN

LIFEBUOY

AS PER ATTACHED SPECN

• AS PER ATTACHED SPECN

• AS PER ATTACHED SPECN

TRADE ASSISTANCE FOR GALVANISATION OF CLIP IRON

Specification : AS PER PROV.SPEC.NO.CQA(GS)/US/467(e)AND T&C.

• As per Specification

• As per Specification

TRADE ASSISTANCE FOR HEAT TREATMENT OF CLIP IRON

Specification : AS PER PROV.SPEC.NO.CQA(GS)/US/467(e)AND T&C.

• As per Specification

• As per Specification

FRP MUD GUARD COVER [(1). FRP MUD GUARD COVER FRONT (LH), DRW. NO. 6159-47-41 QTY: 01, (2). FRP MUD GUARD COVER FRONT (RH), DRW. NO. 6160-47-41 QTY: 01 & (3). FRP MUD GUARD COVER REAR, DRW. NO. 6161-47-41 QTY: 01 SET CONSIST OF 02 NOS for BP SML

FRP MUD GUARD COVER [(1). FRP MUD GUARD COVER FRONT (LH), DRW. NO. 6159-47-41 QTY: 01, (2). FRP MUD GUARD COVER FRONT (RH), DRW. NO. 6160-47-41 QTY: 01 & (3). FRP MUD GUARD COVER REAR, DRW. NO. 6161-47-41 QTY: 01 SET CONSIST OF 02 NOS for BP SML

FRP MUD GUARD COVER [(1). FRP MUD GUARD COVER FRONT (LH), DRW. NO. 6159-47-41 QTY: 01, (2). FRP MUD GUARD COVER FRONT (RH), DRW. NO. 6160-47-41 QTY: 01 & (3). FRP MUD GUARD COVER REAR, DRW. NO. 6161-47-41 QTY: 01 SET CONSIST OF 02 NOS for BP SML

• FRP MUD GUARD COVER [(1). FRP MUD GUARD COVER FRONT (LH), DRW. NO. 6159-47-41 QTY: 01, (2). FRP MUD GUARD COVER FRONT (RH), DRW. NO. 6160-47-41 QTY: 01 & (3). FRP MUD GUARD COVER REAR, DRW. NO. 6161-47-41 QTY: 01 SET CONSIST OF 02 NOS for BP SML

• FRP MUD GUARD COVER [(1). FRP MUD GUARD COVER FRONT (LH), DRW. NO. 6159-47-41 QTY: 01, (2). FRP MUD GUARD COVER FRONT (RH), DRW. NO. 6160-47-41 QTY: 01 & (3). FRP MUD GUARD COVER REAR, DRW. NO. 6161-47-41 QTY: 01 SET CONSIST OF 02 NOS for BP SML

'O' RING TO DRG.NO.ARDE 1135 DETAIL NO.21

'O' RING TO DRG.NO.ARDE 1135 DETAIL NO.21

• AS PE PQ

• AS PER QMI

COLD ROLLED ALUMINIUM ALLOY SHEET TO SPECN. IS:736(LATEST IS SUE) GRADE 65032 IN "M" CONDITION (TEST PIECE TO BE TESTED IN "WP" CONDITION);MATERIAL SHOULD BE CAPABLE FOR FLOW TURNING.SIZE:-9.5 +/- 0.2MM THICK X 914MM WIDE X 2438MM LONG

COLD ROLLED ALUMINIUM ALLOY SHEET TO SPECN. IS:736(LATEST IS SUE) GRADE 65032 IN "M" CONDITION (TEST PIECE TO BE TESTED IN "WP" CONDITION);MATERIAL SHOULD BE CAPABLE FOR FLOW TURNING.SIZE:-9.5 +/- 0.2MM THICK X 914MM WIDE X 2438MM LONG

• as per qmi

• as per pq

GASKET TO OFAJ DRG NO. FS-2886B

GASKET TO OFAJ DRG NO. FS-2886B

• AS PER QMI

• AS PER PQ

CLOSING SLEEVE TO OFAJ DRG NO. FS-2803D

CLOSING SLEEVE TO OFAJ DRG NO. FS-2803D

• AS PER QMI

• AS PER PQ

Barrel Adapter Left for 9X19 mm Machine Pistol as per Drg. No. 2101 01 02 01 05 003 00DA

Barrel Adapter Left for 9X19 mm Machine Pistol as per Drg. No. 2101 01 02 01 05 003 00DA

2101 01 02 01 05 003 00DA

• As per Drawing

• As per Drawing

Barrel Adapter Right for 9X19 mm Machine Pistol as per Drg. No. 2101 01 02 01 05 002 00DA

Barrel Adapter Right for 9X19 mm Machine Pistol as per Drg. No. 2101 01 02 01 05 002 00DA

2101 01 02 01 05 002 00DA

• As per Drawing

• As per Drawing

Lower Housing Assembly for 9X19 mm Machine Pistol as per Drg. No. 2101 01 02 00 03 000 00DA

Lower Housing Assembly for 9X19 mm Machine Pistol as per Drg. No. 2101 01 02 00 03 000 00DA

2101 01 02 00 03 000 00DA

• As per Drawing

• As per Drawing

Guide Piece Cocking for 9X19 mm Machine Pistol as per Drg No 2101 01 02 01 05 005 00DB

Guide Piece Cocking for 9X19 mm Machine Pistol as per Drg No 2101 01 02 01 05 005 00DB

2101 01 02 01 05 005 00DB

• As per Drawing

• As per Drawing

Ejector 9 mm for 9X19 mm Machine Pistol as per Drg No 2101 01 02 01 05 007 00DA

Ejector 9 mm for 9X19 mm Machine Pistol as per Drg. No. 2101 01 02 01 05 007 00DA

2101 01 02 01 05 007 00DA

• As per Drawing

• As per Drawing

LADDER LOCK FOR TAPE WIDTH 25 MM

Specification : 1. PROV. SPEC. NO. S/6421/BAG SLEEPING LT WT/TC-6 2. AS PER SEALED SAMPLE HELD IN THE CUSTODY OF CONTROLLER CQA(T&C), KANPUR 3. AS PER SPECIFICATION NO. OEFC/NYLON LADDER LOCK/2023-24 MATERIAL: NYLON INTERNAL WIDTH: 25 MM(+1, -0)

• As per Specification

• As per Specification

Ladder Lock for Tape Width 25 MM

Prov. Specn. No. S/6421/bag Sleeping Lt Wt/TC-6

• Moulding

• Visual
• Mechanical
• Chemical

RACK 172.27.140

RACK 172.27.140

• TO BE SUBMITTED AS PER VQC

• TO BE SUBMITTED AS PER VQC

DRIVEN SHAFT OPN. 10 TO 70 SEMI MACHINED FORGING TO DRG. NO. 172.40.315-1/SMF

GOST 4543-71

175.40.315-1/SMF

• AS PER VQC

• AS PER QAP

SHAFT PRIMARY OPN. NO. 10 TO 60 SEMI MACHINED FORGING TO DRG. NO. 175.40.016-1/SMF

GOST 4543-71

175.40.016-1/SMF

• AS PER VQC

• AS PER QAP

SPECN.NO./DRAWING NO.-ADRDE/1327(a)

SPECN.NO./DRAWING NO.-ADRDE/1327(a)

SPECN.NO./DRAWING NO.-ADRDE/1327(a)

• As per drawing/specification

• As per drawing/specification

CAST STEEL EMPTY BODY (MACHINED) AS PER ANNEXURE-A AND AS PER DRG. NO.OFM 33056

CAST STEEL EMPTY BODY (MACHINED) AS PER ANNEXURE-A AND AS PER DRG. NO.OFM 33056

OFM-33056

• Moulding Facility. (Dry Sand Moulding/Shell Moulding/No- Bake/CO2 or any other suitable moulding facility
• Melting Facility Induction Furnace
• CNC/DNC

• Mechanical Testing facility (NABL Accredit)
• Chemically Testing facility (NABL Accredit)

ELECTRONIC POWER PLANT TO DRG. NO. GCF/50/40782D (REF. DRG.NO. 1149052)

ELECTRONIC POWER PLANT TO DRG. NO. GCF/50/40782D (REF. DRG.NO. 1149052)

• As per Tender Document Part & QAP

• As per Tender Document Part & QAP

SHAFT ACTUATING LEVER TO DRAWING NO 5047139

SHAFT ACTUATING LEVER TO DRAWING NO 5047139

• SHAFT ACTUATING LEVER TO DRAWING NO 5047139

• SHAFT ACTUATING LEVER TO DRAWING NO 5047139

VALVE ASSEMBLY TO PART NO.1015-000639/IFL 849SA

VALVE ASSEMBLY TO PART NO.1015-000639/IFL 849SA

• VALVE ASSEMBLY TO PART NO.1015-000639/IFL 849SA

• VALVE ASSEMBLY TO PART NO.1015-000639/IFL 849SA

M.S.ROD 7.1MM DIA 1/4 HARD IN THE FORM OF ROD

Specification : PROV. SPEC. DMSRDE/T&GS/93/407(B) AND IS:280

• As per Specification

• As per Specification

SUPPORT OF LH REDUCTION GEAR UNIT TO DRG. NO. 175.01.378-B/F

GOST 4543-71

175.01.378-B/F

• AS PER VQC

• AS PER QAP

ROAD WHEEL ARM 1, 2, 6 SUSPENSIONS TO LF 3906411027 TO DRG. NO. 172.51.021/F

GOST 4543-71

172.51.021/F

• AS PER VQC

• AS PER QAP

Fabrication of Sub Assemblies of Parachute As per OPF Drg No A F 0A 00

OPF Drg No A F 0A 00

as per specn

• as per specn drg

• as per specn drg

NON WOVEN POLYESTER FABRIC BATTING (HOLLOW POLYESTER FIBRE) 140GSM WIDTH 150CM (min) SPECIFICATION as per Appendix I of Schedule No DMSRDE/CPSG/2006/1

NON WOVEN POLYESTER FABRIC BATTING (HOLLOW POLYESTER FIBRE) 140GSM WIDTH 150CM (min) SPECIFICATION as per Appendix I of Schedule No DMSRDE/CPSG/2006/1

• as per attached file.

• as per attached file.

DOG HOOK FOR GLOVES ECW MODIFIED OUTER SPECIFICATION As per Appendix VII of Schedule No DMSRDE/CPSG/2015/7

DOG HOOK FOR GLOVES ECW MODIFIED OUTER SPECIFICATION As per Appendix VII of Schedule No DMSRDE/CPSG/2015/7

• AS PER ATTACHED FILE.

• AS PER ATTACHED FILE.

FLAP RIGHT HAND TO DRG 175.28.020CB

FLAP RIGHT HAND TO DRG 175.28.020CB

• ATTACHED

• ATTACHED

WOODEN CRATE STYLE NO.5 CLASS A FOR THREE/FOUR WAY JOINTS DULY FITTED WITH CLIP AND 3 WAY JOINTS FITTED EACH WITH ONE STOPPER,INTERNAL DIMENSION: 450MM X 450MM X450MM

Specification : IS:3071

• As per Specification

• As per Specification

TAILOR SCISSOR 255MM LONG

Specification : JSS 651-35:1966(REV NO.1)

• As per Specification

• As per Specification

7440200784 CASING AL8635059

7440200784 CASING AL8635059

7440200784 CASING AL8635059

• RUBBER ITEM

• RUBBER ITEM

7440200784 CASING AL8635059

7440200784 CASING AL8635059

7440200784 CASING AL8635059

• RUBBER ITEM

• RUBBER ITEM

7440200727 TERMINAL BLOCK AL5282083 01

7440200727 TERMINAL BLOCK AL5282083 01

7440200727 TERMINAL BLOCK AL5282083 01

• RUBBER ITEM

• RUBBER ITEM

7440200726 TERMINAL BLOCK AL5282083

7440200726 TERMINAL BLOCK AL5282083

7440200726 TERMINAL BLOCK AL5282083

• RUBBER ITEM

• RUBBER ITEM

SHACKLE WITH PIN STEEL

Specification : PROV. SPECN. No. DMSRDE/T&GS/93/407(b)

• As per Specification

• As per Specification

GNC KIT FOR GUIDED PINAKA RKT SYSTM Specification : GNC KIT FOR GUIDED PINAKA PF ROCKET TO RCI DRG.NO.1702-04-02-00-00-000-00DA AS PER GNC KIT CHECKOUT PROCEDURETO DOC NO. RCI/SINT(E)/GNCKIT/CHECKOUT VER:3.0

Specification : GNC KIT FOR GUIDED PINAKA PF ROCKET TO RCI DRG.NO.1702-04-02-00-00-000-00DA AS PER GNC KIT CHECKOUT PROCEDURETO DOC NO. RCI/SINT(E)/GNCKIT/CHECKOUT VER:3.0

• GNC KIT FOR GUIDED PINAKA ROCKET IS BEING DEVELOPED BY RCI, HYDERABAD (DRDO). FIRM TO HAVE ASSEMBLY FACILITIES.

• GNC KIT FOR GUIDED PINAKA ROCKET IS BEING DEVELOPED BY RCI, HYDERABAD(DRDO). FIRM TO HAVE ELECTRONIC TESTING FACILITIES.

AMMUNITION POUCH FOR GPMG 7.62X51MM DRG. NO. SK-GPMG-6251

AMMUNITION POUCH FOR GPMG 7.62X51MM DRG. NO. SK-GPMG-6251

SK-GPMG-6251

• Metal Forming, Stitching

• 1) Chemical & Mechanical properties as per std. given drawing (if applicable). 2) Dimensional inspection, for all dimensions given in the drawings & other parameter which are mentioned in relevant drawing.

D RING PLASTIC 25MM WHITE FOR GLOVES ECW MODIFIED SPECIFICATION as per Appendix X of Schedule No DMSRDE/FFTT/2007/466/1

D RING PLASTIC 25MM WHITE FOR GLOVES ECW MODIFIED SPECIFICATION as per Appendix X of Schedule No DMSRDE/FFTT/2007/466/1

• as per attached file

• as per attached file

O RING 3 point 4 X 1 point 9 TO OFAJ DRG NO FS 2774 B

O RING 3 point 4 X 1 point 9 TO OFAJ DRG NO FS 2774 B

• AS PER PRE-QUALIFICATION CRITERIA

• AS PER QMI AND PRE-QUALIFICATION CRITERIA.

NYLON SEWING THREAD FOR AEROSPACE PURPOSE (VARIETY NO. H1) BLACK - A/F

Specification : SPECN.NO.IS:4229-1992 (2ND REVISION) NOTE: SHADE OF SEWING THREAD WILL BE BLACK.

• As per specification

• As per specification

NYLON SEWING THREAD FOR AEROSPACE PURPOSE (VARIETY NO. H1) BLACK - A/F

Specification : SPECN.NO.IS:4229-1992 (2ND REVISION) NOTE: SHADE OF SEWING THREAD WILL BE BLACK.

• As per specification

• As per specification

BRACKET TO DRG NO: 172.22.032/C

GOST 2685 - 75

172.22.032/C

• AS PER VQC

• AS PER QAP

POLYESTER KNITTED FABRIC SINGLE JERSEY 130 GSM BLACK IN COLOR WIDTH 150CM min SPECIFICATION as per Clause 4.1 (page No 3-4) of Provisional specification No DMSRDE/FF&IT/2007/466/2(b)

POLYESTER KNITTED FABRIC SINGLE JERSEY 130 GSM BLACK IN COLOR WIDTH 150CM min SPECIFICATION as per Clause 4.1 (page No 3-4) of Provisional specification No DMSRDE/FF&IT/2007/466/2(b)

• as per attached file.

• as per attached file.

POLYESTER PILE KNITTED FABRIC GROUND AND PILE BOTH OF POLYESTER 220 GSM BLACK IN COLOR WIDTH 150CM min SPECIFICATION as per clause 4.1 page No 3-4 of Provisional specification No DMSRDE/ FF&IT/2007/466/2(b)

POLYESTER PILE KNITTED FABRIC GROUND AND PILE BOTH OF POLYESTER 220 GSM BLACK IN COLOR WIDTH 150CM min SPECIFICATION as per clause 4.1 page No 3-4 of Provisional specification No DMSRDE/ FF&IT/2007/466/2(b)

• AS PER ATTACHED FILE

• AS PER ATTACHED FILE

FABRIC PILE ACRYLIC SLIVER KNITTED 430 GSM WHITE width150 CM min SPECIFICATION as per Appendix II of Schedule No DMSRDE/CPSG/2006/2

FABRIC PILE ACRYLIC SLIVER KNITTED 430 GSM WHITE width150 CM min SPECIFICATION as per Appendix II of Schedule No DMSRDE/CPSG/2006/2

• AS PER ATTACHED FILE.

• AS PER ATTACHED FILE.

TAPE ELASTIC 150 MM WHITE FOR GLOVES ECW MODIFIED INNER AND OUTER SPECIFICATION TAPE ELASTIC 150 MM WHITE as per Appendix- V of Schedule No DMSRDE/CPSG/2015/5

TAPE ELASTIC 150 MM WHITE FOR GLOVES ECW MODIFIED INNER AND OUTER SPECIFICATION TAPE ELASTIC 150 MM WHITE as per Appendix- V of Schedule No DMSRDE/CPSG/2015/5

• AS PER ATTACHED FILE.

• AS PER ATTACHED FILE.

7432418301 CABLE ASSEMBLY AS PER DRAWING NO. AF6.640.068

7432418301 CABLE ASSEMBLY AS PER DRAWING NO. AF6.640.068

7432418301 CABLE ASSEMBLY AS PER DRAWING NO. AF6.640.068

• ELECTRONICS ITEM

• ELECTRONICS ITEM

BODY DRG NO BL8035176 LF NO 7440207099

BODY DRG NO BL8035176 LF NO 7440207099

BL8035176

• MECHANICAL COMPONENT

• MECHANICAL COMPONENT

ARM FOR DHANUSH AS PER DRG No D 4081495

ARM FOR DHANUSH AS PER DRG No D 4081495

• AS PER ATTACHED DOCUMENT

• AS PER ATTACHED DOCUMENT

188.86.045CBCB

188.86.045CBCB

188.86.045CBCB

• Attached

• Attached