WASHER MAT NITRILE BLACK SHORE HARDNESS 80+-5 TO DES REF 155-1120 DC NO 36792-A DT.01/11/2001 FOR SHELL 155 MM HE BB, I/C-6473200461

WASHER MAT NITRILE BLACK SHORE HARDNESS 80+-5 TO DES REF 155-1120 DC NO 36792-A DT.01/11/2001 FOR SHELL 155 MM HE BB, I/C-6473200461

• WASHER MAT NITRILE BLACK SHORE HARDNESS 80+-5 TO DES REF 155-1120 DC NO 36792-A DT.01/11/2001 FOR SHELL 155 MM HE BB, I/C-6473200461

• WASHER MAT NITRILE BLACK SHORE HARDNESS 80+-5 TO DES REF 155-1120 DC NO 36792-A DT.01/11/2001 FOR SHELL 155 MM HE BB, I/C-6473200461

O RING INTERNAL DIA 124.5 X 3 SECTION NITRILE WITH SHORE HARDNESS I/C-6473200483

O RING INTERNAL DIA 124.5 X 3 SECTION NITRILE WITH SHORE HARDNESS I/C-6473200483

• O RING INTERNAL DIA 124.5 X 3 SECTION NITRILE WITH SHORE HARDNESS I/C-6473200483

• O RING INTERNAL DIA 124.5 X 3 SECTION NITRILE WITH SHORE HARDNESS I/C-6473200483

PACKING BOX FOR FUZE PDM557

PACKING BOX FOR FUZE PDM557

• NA

• NA

Packages for 40MM L/70 for Nammo

Packages for 40MM L/70 for Nammo

• 1-Plastic injection moulding facility 2.Sheet metal forming 3.Rubber moulding 4.Air tightness testing (in water bath) 5.Drop test facility 6.Density test facility 7.Load test for handle 8.Other Relevant inspection and testing facility

• 1-Plastic injection moulding facility 2.Sheet metal forming 3.Rubber moulding 4.Air tightness testing (in water bath) 5.Drop test facility 6.Density test facility 7.Load test for handle 8.Other Relevant inspection and testing facility

APPCP Carton No. 2 as per Drg. No. V/PROV/0915 B

SPECIFICATION NO. OFV/APPCP CARTONS/PKG(REV.NO.1), DT.15/09/2025

Drg. No. V/PROV/0915 B

• PLASTIC MANUFACTURING TECHNOLOGY

• AS PER SPECIFICATION NO. OFV/APPCP CARTONS/PKG(REV.NO.1) DT.15/09/2025

APPCP CARTON NO 1 As per Drg. No. VA7/PROV/0243 C (EARLIER NAME WAS BOX WITH HINGES)

APPCP CARTON NO 1 As per Drg. No. VA7/PROV/0243 C (EARLIER NAME WAS BOX WITH HINGES)

Drg. No. VA7/PROV/0243 C

• Plastic Moulding

• As per OFV/APPCP Cartons/Pkg dated 26-10-2023

DUMMY DPICM ( MASS ADJUSTMENT PURPOSE) TO ARDE DRG NO.860303 04 02 01 006 00DA AND QAP NO ARDE/PINAKA/SPECN & QAP WH-10 DT.21/08/2025 i/C- 6410900371/ 12015325

DUMMY DPICM ( MASS ADJUSTMENT PURPOSE) TO ARDE DRG NO.860303 04 02 01 006 00DA AND QAP NO ARDE/PINAKA/SPECN & QAP WH-10 DT.21/08/2025 i/C- 6410900371/ 12015325

ARDE DRG NO.860303 04 02 01 006 00DA AND QAP NO ARDE/PINAKA/SPECN & QAP WH-10 DT.21/08/2025

• ARDE DRG NO.860303 04 02 01 006 00DA AND QAP NO ARDE/PINAKA/SPECN & QAP WH-10 DT.21/08/2025

• ARDE DRG NO.860303 04 02 01 006 00DA AND QAP NO ARDE/PINAKA/SPECN & QAP WH-10 DT.21/08/2025

GENERATOR SMOKE ASSEMBLY (EMPTY) TO DRG.NO. CQA(A)/AMN/2808 PART.NO.IQW7 GE DC 36462-A DT.02/9/98 CONSISTING OF (1) LID &TEAR OFF DISC ASSY TO DRG.NO.IQW 15 SA (2) BAFFLE PLATE TO DRG.NO.IQW208 (3) BODY TO DRG. NO.IQW 16 SA (4) BOTTOM PLATE TO DRG.IQW 209 (5) SOLDERING TAGS TO DRG.IQW.210 WITHOUT B.G. PAINTING

GENERATOR SMOKE ASSEMBLY (EMPTY) TO DRG.NO. CQA(A)/AMN/2808 PART.NO.IQW7 GE DC 36462-A DT.02/9/98

• GENERATOR SMOKE ASSEMBLY (EMPTY) TO DRG.NO. CQA(A)/AMN/2808 PART.NO.IQW7 GE DC 36462-A DT.02/9/98
• as per drawing
• as per drawing
• as per drawing
• as per drawing

• as per drawing
• as per drawing
• as per drawing
• as per drawing
• as per drawing

GENERATOR SMOKE ASSEMBLY (EMPTY) TO DRG.NO. CQA(A)/AMN/2808 PART.NO.IQW7 GE DC 36462-A DT.02/9/98 CONSISTING OF (1) LID &TEAR OFF DISC ASSY TO DRG.NO.IQW 15 SA (2) BAFFLE PLATE TO DRG.NO.IQW208 (3) BODY TO DRG. NO.IQW 16 SA (4) BOTTOM PLATE TO DRG.IQW 209 (5) SOLDERING TAGS TO DRG.IQW.210 WITHOUT B.G. PAINTING

GENERATOR SMOKE ASSEMBLY (EMPTY) TO DRG.NO. CQA(A)/AMN/2808 PART.NO.IQW7 GE DC 36462-A DT.02/9/98

• GENERATOR SMOKE ASSEMBLY (EMPTY) TO DRG.NO. CQA(A)/AMN/2808 PART.NO.IQW7 GE DC 36462-A DT.02/9/98
• as per drawing
• as per drawing
• as per drawing
• as per drawing

• as per drawing
• as per drawing
• as per drawing
• as per drawing
• as per drawing

POLYTHENE MOULDING POWDER (LOW DENSITY) TO JSS.9330-03 2019 REV.4 I/C-1020611428

POLYTHENE MOULDING POWDER (LOW DENSITY) TO JSS.9330-03 2019 REV.4 I/C-1020611428

• POLYTHENE MOULDING POWDER (LOW DENSITY) TO JSS.9330-03 2019 REV.4 I/C-1020611428

• POLYTHENE MOULDING POWDER (LOW DENSITY) TO JSS.9330-03 2019 REV.4 I/C-1020611428

HIGH DENSITY POLYETHYLENE GRANULES TYPE 2 TO SPECN NO JSS 9330-03:1995 (REV NO 1) DC 3490-ME DT.14/01/98 I/C- 1020611406

HIGH DENSITY POLYETHYLENE GRANULES TYPE 2 TO SPECN NO JSS 9330-03:1995 (REV NO 1) DC 3490-ME DT.14/01/98 I/C- 1020611406

• HIGH DENSITY POLYETHYLENE GRANULES TYPE 2 TO SPECN NO JSS 9330-03:1995 (REV NO 1) DC 3490-ME DT.14/01/98 I/C- 1020611406

• HIGH DENSITY POLYETHYLENE GRANULES TYPE 2 TO SPECN NO JSS 9330-03:1995 (REV NO 1) DC 3490-ME DT.14/01/98 I/C- 1020611406

STEEL INSERT FOR 12.7MM API BULLET DRG. NO. V12.7/PROD/004C

STEEL INSERT FOR 12.7MM API BULLET DRG. NO. V12.7/PROD/004 C

DRG. NO. V12.7/PROD/004 C

• MACHINING
• HEAT TREATMENT

• AS PER QMI

Box H5A Steel (Drg. PT No. ISV-517-A) DC No. 37123-A Dtd. 06-07-2007, Specn. No. IA 1169(n) DC No. 35576-A Dtd. 08-09-93and painted int. & Ext. with olive green paint as per ISC No. 220 of IS : 5-2007 (Rev. VI) using paint ready mixed, air drying MATT finish for general purpose brushing spraying as per IS :168-2016 Reaffirmed 2022 (IV Rev.). As applicable to defense use.

Box H5A Steel (Drg. PT No. ISV-517-A) DC No. 37123-A Dtd. 06-07-2007, Specn. No. IA 1169(n) DC No. 35576-A Dtd. 08-09-93and painted int. & Ext. with olive green paint as per ISC No. 220 of IS : 5-2007 (Rev. VI) using paint ready mixed, air drying MATT finish for general purpose brushing spraying as per IS :168-2016 Reaffirmed 2022 (IV Rev.). As applicable to defense use.

(Drg. PT No. ISV-517-A)

• SHEET METAL BLANKING
• SHEET METAL BENDING
• SHEET METAL CUTTING

• AIR TIGHTENING TEST
• DROP AND JOLT TEST

POLYPROPYLENE CORRUGATED SHEET, ANTI STATIC

DRAFT SPECIFICATION NO. OFV/SPECN/PP/102, SIZE :- 250 (+/-5)MM X 70 (+/-3)MM, THICKNESS :- 4.5MM TO 5MM, GSM :- 1500 (TOLERANCE +/- 75)

• EXTRUSION PROCESS

• THICKNESS TEST
• Edge Crush Test (ECT)
• Impact and Tear Strength Test

POLYPROPYLENE CORRUGATED SHEET, ANTI STATIC

DRAFT SPECIFICATION NO. OFV/SPECN/PP/102, SIZE :- 245 (+/-5)MM x 160 (+/-3)MM, THICKNESS :- 4.5MM TO 5MM, GSM :- 1500 (TOLERANCE +/-75)

• EXTRUSION PROCESS

• THICKNESS TEST
• Edge Crush Test (ECT)
• Impact and Tear Strength Test

Carrier 7A/L To Specn. IA-1169(n), DC(I) NO. 35576-A DRG. NO. CIA/AMMN/1165 ISV-355-A DC(I) NO. 37123-A DT 02-07-2007 painted with Paint Olive Green Ready mixed Air Drying MATT finish for general purpose paint as per ISC No. 220 of IS : 5-2007(VI Rev.) Reaffirmed 2022 To Specn. IS : 168-2016 Reaffirmed 2021 (IV Rev.). As applicable to Defence use.

Carrier 7A/L To Specn. IA-1169(n), DC(I) NO. 35576-A DRG. NO. CIA/AMMN/1165 ISV-355-A DC(I) NO. 37123-A DT 02-07-2007 painted with Paint Olive Green Ready mixed Air Drying MATT finish for general purpose paint as per ISC No. 220 of IS : 5-2007(VI Rev.) Reaffirmed 2022 To Specn. IS : 168-2016 Reaffirmed 2021 (IV Rev.). As applicable to Defence use.

CIA/AMN/1165

• SHEET METAL BLANKING
• SHEET METAL BENDING
• SHEET METAL CUTTING

• LOAD TEST
• WELD TEST

CARRIER 6A/L (STEEL), TO DESIGNERS REF. CIA/AMN/1162, PART NO. ISV 354-A, DC 373423-A DT.30-09-2013,SPECN IA-1169(n), DC 35576-A DT 8-9-1993 DULY PAINTED AS PER DRG WITH PAINT OF SHADE OLIVE GREEN ISC 220 OF IS 5-2007 (REV. VI) REAFFIRMED 2022

CARRIER 6A/L (STEEL), TO DESIGNERS REF. CIA/AMN/1162, PART NO. ISV 354-A, DC 373423-A DT.30-09-2013,SPECN IA-1169(n), DC 35576-A DT 8-9-1993 DULY PAINTED AS PER DRG WITH PAINT OF SHADE OLIVE GREEN ISC 220 OF IS 5-2007 (REV. VI) REAFFIRMED 2022

CIA/AMN/1182

• SHEET METAL BLANKING
• SHEET METAL BENDING
• SHEET METAL CUTTING

• LOAD TEST
• WELDING TEST

BOX H2A (STEEL) 1. AMMUNITION CONTAINER 9BOX0 H2A AIRTIGHT PACKAGE. 2. DULY POWDER COATED (IS 13871 1993) (REFF. 2002) WITH PAINT OF SHADE OLIVE GREEN OF SHADE NO. 220 OF IS 5-2007 (REFF. 2022) REVISION NO. 6 MATT FINISH. 3. DESIGNERS REFERENCE NO. CIA/AMMN/468 PART NO. ISV 296-A DC NO. 37123-A SPECIFICATION NO. IA 1169(N) DC NO. 35576-A. 4. GASKET SPECIFICATION - IND/ME/584(F), MAX SULFER CONTENT - 1.5%, FIRM HAS TO SUBMIT CHEMICAL TEST REPORT FROM NABL ACCREDITED LAB. 5. PACKING AND MARKING AS PER TENDER REQUIREMENT.

BOX H2A (STEEL) 1. AMMUNITION CONTAINER 9BOX0 H2A AIRTIGHT PACKAGE. 2. DULY POWDER COATED (IS 13871:1993) (REFF. 2002) WITH PAINT OF SHADE OLIVE GREEN OF SHADE NO. 220 OF IS 5-2007 (REFF. 2022) REVISION NO. 6 MATT FINISH. 3. DESIGNER'S REFERENCE NO. CIA/AMMN/468 PART NO. ISV 296-A DC NO. 37123-A SPECIFICATION NO. IA 1169(N) DC NO. 35576-A. 4. GASKET SPECIFICATION - IND/ME/584(F), MAX SULFER CONTENT - 1.5%, FIRM HAS TO SUBMIT CHEMICAL TEST REPORT FROM NABL ACCREDITED LAB. 5. PACKING AND MARKING AS PER TENDER REQUIREMENT.

CIA/AMN/468

• SHEET METAL BLANKING
• SHEET METAL BENDING
• SHEET METAL CUTTING

• AIR TIGHTENING TEST
• DROP AND JOLT TEST

STEEL INSERT FOR 12.7MM API BULLET DRG. NO. V12.7/PROD/004C

STEEL INSERT FOR 12.7MM API BULLET DRG. NO. V12.7/PROD/004 C

DRG. NO. V12.7/PROD/004 C

• MACHINING
• HEAT TREATMENT

• AS PER QMI

SHELL FOR 30MM ADEN AMMN.

SHELL FOR 30MM ADEN AMMN.

• NA

• NA

CARTRIDGE CASE FOR 30MM ADEN AMMN.

CARTRIDGE CASE FOR 30MM ADEN AMMN.

• NA

• NA

APPCP Carton No. 2 as per Drg. No. V/PROV/0915 B

SPECIFICATION NO. OFV/APPCP CARTONS/PKG(REV.NO.1), DT.15/09/2025

Drg. No. V/PROV/0915 B

• PLASTIC MANUFACTURING TECHNOLOGY

• AS PER SPECIFICATION NO. OFV/APPCP CARTONS/PKG(REV.NO.1) DT.15/09/2025

PLATE HOOK TO DRG NO 1A 793 TO PART NO ISV-7 I/c- 6333501016

PLATE HOOK TO DRG NO 1A 793 TO PART NO ISV-7 I/c- 6333501016

• PLATE HOOK TO DRG NO 1A 793 TO PART NO ISV-7 I/c- 6333501016

• PLATE HOOK TO DRG NO 1A 793 TO PART NO ISV-7 I/c- 6333501016

CATCH LOCKING TO DRG NO 1A 793 & PART NO ISV 1A I/c-6331401018

CATCH LOCKING TO DRG NO 1A 793 & PART NO ISV 1A I/c-6331401018

• CATCH LOCKING TO DRG NO 1A 793 & PART NO ISV 1A I/c-6331401018

• CATCH LOCKING TO DRG NO 1A 793 & PART NO ISV 1A I/c-6331401018

Guanidine Nitrate as per Specification No.: JSS 6810-95:2023 (Rev. No. 5) DC No.- 6673-ME Dt. 08/07/2024

Specification No.: JSS 6810-95:2023 (Rev. No. 5) DC No.- 6673-ME Dt. 08/07/2024

• As per attached document

• As per attached document

FOR 84MM SMOKE SHELL 469C AMMUNITION

FOR 84MM SMOKE SHELL 469C AMMUNITION

• AS PER DRG/QAP

• AS PER QAP/ATP

SQUIB PLUG (BRIDGED) TO DRG NO ERDL DRG 1069 DET NO 1 TO SPECN HEMRL/PYRO/PS/207 (C) I/c- 6454000051

SQUIB PLUG (BRIDGED) TO DRG NO ERDL DRG 1069 DET NO 1 TO SPECN HEMRL/PYRO/PS/207 (C) I/c- 6454000051

• SQUIB PLUG (BRIDGED) TO DRG NO ERDL DRG 1069 DET NO 1 TO SPECN HEMRL/PYRO/PS/207 (C) I/c- 6454000051

• SQUIB PLUG (BRIDGED) TO DRG NO ERDL DRG 1069 DET NO 1 TO SPECN HEMRL/PYRO/PS/207 (C) I/c- 6454000051

PROTECTING COVER DRG. NOS NASK 776/9/2 (PROVISIONAL) I/c-6192547769

PROTECTING COVER DRG. NOS NASK 776/9/2 (PROVISIONAL) I/c-6192547769

• PROTECTING COVER DRG. NOS NASK 776/9/2 (PROVISIONAL) I/c-6192547769

• PROTECTING COVER DRG. NOS NASK 776/9/2 (PROVISIONAL) I/c-6192547769

NG BARRIER FOR 120 MM HESH AMMN. TO SPECN . NO HEMRL/CCC/PS/408, SEPT.2014 AND DRG.NOHEMRL/CCC/120 HESH/ 2014 I/c- 1010501025

NG BARRIER FOR 120 MM HESH AMMN. TO SPECN . NO HEMRL/CCC/PS/408, SEPT.2014 AND DRG.NOHEMRL/CCC/120 HESH/ 2014 I/c- 1010501025

• NG BARRIER FOR 120 MM HESH AMMN. TO SPECN . NO HEMRL/CCC/PS/408, SEPT.2014 AND DRG.NOHEMRL/CCC/120 HESH/ 2014 I/c- 1010501025

• NG BARRIER FOR 120 MM HESH AMMN. TO SPECN . NO HEMRL/CCC/PS/408, SEPT.2014 AND DRG.NOHEMRL/CCC/120 HESH/ 2014 I/c- 1010501025

MILL BOARD TO SPECN JSS 9310-01: 2025 SIZE 787 MM X 559 MM X1.25 MM +- 0.18 MM THICK MASS 1450+- 220 GSM I/c-1421006728

MILL BOARD TO SPECN JSS 9310-01: 2025 SIZE 787 MM X 559 MM X1.25 MM +- 0.18 MM THICK MASS 1450+- 220 GSM I/c-1421006728

• MILL BOARD TO SPECN JSS 9310-01: 2025 SIZE 787 MM X 559 MM X1.25 MM +- 0.18 MM THICK MASS 1450+- 220 GSM I/c-1421006728

• MILL BOARD TO SPECN JSS 9310-01: 2025 SIZE 787 MM X 559 MM X1.25 MM +- 0.18 MM THICK MASS 1450+- 220 GSM I/c-1421006728

CONTAINER TO DRG NO 4-24929 INDEX NO 3RK 33 DET NO 000 DC NO 36434-A

CONTAINER 3 RK 33 METAL FOR 125 MM CONTAINER TO DRG NO 4-24929 INDEX NO 3RK 33 DET NO 000 DC NO 36434-A I/c- 6570950402

• CONTAINER 3 RK 33 METAL FOR 125 MM CONTAINER TO DRG NO 4-24929 INDEX NO 3RK 33 DET NO 000 DC NO 36434-A I/c- 6570950402

• CONTAINER 3 RK 33 METAL FOR 125 MM CONTAINER TO DRG NO 4-24929 INDEX NO 3RK 33 DET NO 000 DC NO 36434-A I/c- 6570950402

MILL BOARD (CUPPING QUALITY) SPECN JS 9310-01 2014 (REV NO 3) SIZE 787 MM X 600 MM X 4.50 THICK + 0.40 MM I/c- 1421060045

MILL BOARD (CUPPING QUALITY) SPECN JS 9310-01 2014 (REV NO 3) SIZE 787 MM X 600 MM X 4.50 THICK + 0.40 MM I/c- 1421060045

• MILL BOARD (CUPPING QUALITY) SPECN JS 9310-01 2014 (REV NO 3) SIZE 787 MM X 600 MM X 4.50 THICK + 0.40 MM I/c- 1421060045

• MILL BOARD (CUPPING QUALITY) SPECN JS 9310-01 2014 (REV NO 3) SIZE 787 MM X 600 MM X 4.50 THICK + 0.40 MM I/c- 1421060045

SHELL 125 MM HE 1A (EMPTY)TO DRG PART NO ISX-61 GE(DESIGNERS REF NO.CQA(A)/AMN/2590 DC-NO.37147-A, DT. 14-11-2007 WITHOUT FIN ASSEMBLY,EXTERNAL SURFACE PAINTED WITH OLIVE GREEN RAL 6003, MATT FINISH TO DEFENCE STANDARD:DEF STAN 80-25 ISSUE-5 DATE 09 JANUARY 2009 (PAINT AMMUNITION FINISHING,STOVING AND DIPPING TYPES) INSTEAD OF PAINT MIDDLEBUFF AS MENTIONED IN DRAWING.

SHELL 125 MM HE 1A (EMPTY)TO DRG PART NO ISX-61 GE(DESIGNERS REF NO.CQA(A)/AMN/2590 DC-NO.37147-A, DT. 14-11-2007 WITHOUT FIN ASSEMBLY,EXTERNAL SURFACE PAINTED WITH OLIVE GREEN RAL 6003, MATT FINISH TO DEFENCE STANDARD:DEF STAN 80-25 ISSUE-5 DATE 09 JANUARY 2009 (PAINT AMMUNITION FINISHING,STOVING AND DIPPING TYPES) INSTEAD OF PAINT MIDDLEBUFF AS MENTIONED IN DRAWING.

• Shear cutting machine/Band saw for cutting billets, Induction heating Furnace of capacity minimum 1000 KW for heating Billets, Hydraulic Press for forging of capacity minimum 400 Tonne, Press for Nosing Operation of capacity minimum 400 Tonne, Heat treatment furnace, Shot blasting facility/ machine. Pressing Machine for fitting of obturating bandson the Shell body with working pressure of 170 Kg/cm2 for dwell time 10 seconds. The number of rotations and pressings to ensure 3600 pressing, CNC machines for machining operation for turning, boring, grooving& threading, Phosphating & Painting Facility.
• Manufacturing facility or Tie-up /MOU for Plug.

• Hydraulic Pressure testing machine for pressure test at 600 Kg/cm2minimum for dwell time 10 seconds,MPI facility to detect any surface crack/flaws. Minimum magnetization current to be 2000 Amp. to 2500 Amp. for duration 2 to 4 seconds both through poles and coils,Ultrasonic machine to detect internal metallurgical .defects.
• Suitable measuring facility

Aluminium Powder

ERDL/TRIM/PROP/RM/2

• As per Attached documents

• As per Attached documents

pyrogallol

ERDL/TRIM/PROP/RM/10

• As per attached documents

• As per attached documents

Fin Assembly HEDP Part No. 1183786

Fin Assembly HEDP Part No. 1183786

• As per ATP/QAP

• As per ATP/QAP

As per ATP/QAP

As per ATP/QAP

• As per ATP/QAP

• As per ATP/QAP

Antistatic Polythene Liners as per Attached specification No. NG/BDU/016/Spcn/02, Dated 17.01.2024

Antistatic Polythene Liners as per Attached specification No. NG/BDU/016/Spcn/02, Dated 17.01.2024

• As per OFBa specification

• NABL Accredited

FILLING OF DETONATOR M24 WITH CHEMICAL COMPOSITION AS MENTIONED IN SPECIFICATION.

U-III/34/FUZE PDM-557/M-24 DTD:01.01.2026

• AS MENTIONED IN SPECIFICATION

• AS MENTIONED IN SPECIFICATION

FILLING OF DETONATOR M17 WITH CHEMICAL COMPOSITION AS MENTIONED IN SPECIFICATION.

U-III/34/FUZE PDM-557/M-17 DTD: 01.01.2026

• AS MENTIONED IN SPECIFICATION

• AS MENTIONED IN SPECIFICATION.

FILLING OF DETONATOR M2 WITH CHEMICAL COMPOSITION AS MENTIONED IN SPECIFICATION.

U-III/34/FUZE 557/ M-2 DTD: 01.1.2026

• AS PER SPECIFICATION

• AS PER SPECIFICATION

Hydroxy Terminated Poly Butadiene (HTPB) as per Specification No. HEMRL/TRIM/PROP/RM/4 (Revised)

Specification No. HEMRL/TRIM/PROP/RM/4 (Revised)

• As per attached document

• As per attached document

PLYWOOD BOX (ALTERNATE CRATE 12A) DES.REF.OFK DRG.NO. M 1.1.5665A PART NO. ISV 645A (2 SHEETS) DC NO.37681-A DT.06-03-26

PLYWOOD BOX (ALTERNATE CRATE 12A) DES.REF.OFK DRG.NO. M 1.1.5665A PART NO. ISV 645A (2 SHEETS) DC NO.37681-A DT.06-03-26

• Wood Cutting Machine (manual/automated) Wood Processing Machine (manual/automated) Wood Carving Machine (manual/automated) Surface Planers (manual/automated) Wood treatment facility Other wooden work tools Painting facility Other relevant Inspection & testing facility

• Wood Cutting Machine (manual/automated) Wood Processing Machine (manual/automated) Wood Carving Machine (manual/automated) Surface Planers (manual/automated) Wood treatment facility Other wooden work tools Painting facility Other relevant Inspection & testing facility

Protein Colloid as per specification no. IND-ME-915(PROV) DC-3214 ME DTD.14-12-1994

IND-ME-915(PROV) DC-3214 ME DTD.14-12-1994

• As per attached document

• As per attached document

Ammonium Perchlorate as per Specification No. ERDL/TRIM/PROP/RM/I

Specification No. ERDL/TRIM/PROP/RM/I

• As per attached document

• As per attached document

Carbamite Undyed Powder/ Flake as per JSS-6810-125:2020 Rev. No. 4 DC No. 6225-ME Dated 02/09/2021

JSS-6810-125:2020 Rev. No. 4 DC No. 6225-ME Dated 02/09/2021

• As per attached document

• As per attached document

PALLET FOR PACKING RD 125MM HE

PALLET FOR PACKING RD.125MM HE AS PER DRGNO.BL/EQP/U-10/215

• GENERAL PURPOSE CARPENTRY TOOLS,WOOD CUTTING FACILITY & PLANNER MACHINE,PRESSURE TREATMENT TANK/ CHEMICAL TREATMENT FACILITY
• DESIRABLE - SUITABLE PAINTING FACILITY,HAND PRESS MACHINE

• SUITABLE MEASUREMENT EQUIPMENT, SUITABLE TESTING FACILITY AS PER PRODUCT SPECIFICATION REQUIREMENT ETC.

FORGED AND HEAT TREATED BASE BLEED MOTOR TO OFAJ DRG NO. F-453E FOR 155MM ERFB (BB).

a) OFAJ Drawing No. F-453-E b) Specification: ASTM B221M – 07 c) MI (Monitoring Instructions) No.: HAPP/QA/SC/BBM/001, DOI: 25/10/2025, Is. No. 01, Rev. No. 00

• OFAJ DRG NO. F-453E FOR 155MM ERFB (BB).

• As per MI (Monitoring Instructions) No.: HAPP/QA/SC/BBM/001, DOI: 25/10/2025, Is. No. 01, Rev. No. 00

SET OF COMPONENTS CONSISTING OF 11 ITEMS (EMPTY) TO DRG. NO. NAI (P) 511(PROV) FOR MARKER MAN OVER BOARD

SET OF COMPONENTS CONSISTING OF 11 ITEMS (EMPTY) TO DRG. NO. NAI (P) 511(PROV) FOR MARKER MAN OVER BOARD

• as per specification/ drawing NO. NAI (P) 511(PROV) FOR MARKER MAN OVER BOARD

• as per specification/ drawing

PLASTIC FILM SLEEVE SPEC NO. OFN/SPEC/BMCS/M92/PFS/00, AS PER DRAWING NO. BMCS-M92-PFS-01 ,QAP NO. OFN/QAP/BMCS/M92/PFS/00 DATED 04/04/2024 REV. 00 AND MI NO. OFN/MI/BMCS/M92/PFS/00 REV. 00 DATED 09/12/2024

PLASTIC FILM SLEEVE SPEC NO. OFN/SPEC/BMCS/M92/PFS/00, AS PER DRAWING NO. BMCS-M92-PFS-01 ,QAP NO. OFN/QAP/BMCS/M92/PFS/00 DATED 04/04/2024 REV. 00 AND MI NO. OFN/MI/BMCS/M92/PFS/00 REV. 00 DATED 09/12/2024

• AS PER QAP

• AS PER QAP

BOX WOOD TO DRG NO ERDL/1084 DET NO.1 and DET NO.2 SHT no.2 PAINTED WITH READY MIXED PAINT, QUICK DRYING MATT FOR GENERAL PURPOSE SERVICE BROWN (IS:5:2007) (6TH REV) RA 2012 ISC 499 TO SPECN : IS 168 1993 (3RD REV) DC 5035 ME DT 14.11.2011 RA 2012

BOX WOOD TO DRG NO ERDL/1084 DET NO.1 and DET NO.2 SHT no.2 PAINTED WITH READY MIXED PAINT, QUICK DRYING MATT FOR GENERAL PURPOSE SERVICE BROWN (IS:5:2007) (6TH REV) RA 2012 ISC 499 TO SPECN : IS 168 1993 (3RD REV) DC 5035 ME DT 14.11.2011 RA 2012

• AS PER SPECIFICATION

• AS PER SPECIFICATION

CQA(A) 2345(c)[Drg. No. ARDE- 1965 DET. 26 , Part No. ITV 115]

CQA(A) 2345(c)[Drg. No. ARDE- 1965 DET. 26 , Part No. ITV 115]

• AS PER SPECIFICATION

• AS PER SPECIFICATION

SELF ADHESIVE TAPE FOR BMCS SPEC. NO. – OFN/SPEC/BMCS/M91/M92/SAT/00 AS PER DRAWING NO.BMCS-M91-M92-SAT-01 , AS PER QAP NO. OFN/QAP/BMCS/M91/M92/SAT/00 DATED 13.04.2024 AND MI NO. OFN /MI/BMCS/M91/M92/SAT/00 REV 00 DATED 06.12.2024

SELF ADHESIVE TAPE FOR BMCS SPEC. NO. – OFN/SPEC/BMCS/M91/M92/SAT/00 AS PER DRAWING NO.BMCS-M91-M92-SAT-01 , AS PER QAP NO. OFN/QAP/BMCS/M91/M92/SAT/00 DATED 13.04.2024 AND MI NO. OFN /MI/BMCS/M91/M92/SAT/00 REV 00 DATED 06.12.2024

• AS PER QAP

• AS PER QAP

BORE WEAR REDUCING LINER (BWRL), AS PER SPECIFICATION NO. OFN/SPEC/BMCS/M92/BWRL/00, AS PER DRAWING No.BMCS-M92-BWRL-01, AS PER QAP NO. OFN/QAP/BMCS/M92/BWRL/00 DATED 29.03.2024 & AS PER MI NO.OFN/MI/BMCS/M92/BWRL/00 DATED 06.12.2024

BORE WEAR REDUCING LINER (BWRL), AS PER SPECIFICATION NO. OFN/SPEC/BMCS/M92/BWRL/00, AS PER DRAWING No.BMCS-M92-BWRL-01, AS PER QAP NO. OFN/QAP/BMCS/M92/BWRL/00 DATED 29.03.2024 & AS PER MI NO.OFN/MI/BMCS/M92/BWRL/00 DATED 06.12.2024

• AS PER QAP

• AS PER QAP

BARRIER BAG FOR M91 & M92-OFN/ SPEC/ BMCS/ M91/ M92/ BB/00, AS PER DRAWING NO. BMCS-M91-M92-BB-02 and QAP No. OFN/QAP/BMCS/M92/M91/BB/00 DATED 04/04/2024

BARRIER BAG FOR M91 & M92-OFN/ SPEC/ BMCS/ M91/ M92/ BB/00, AS PER DRAWING NO. BMCS-M91-M92-BB-02 and QAP No. OFN/QAP/BMCS/M92/M91/BB/00 DATED 04/04/2024

• AS PER QAP

• AS PER QAP

PLASTIC FILM BAG FOR BMCS, SPECIFICATION NO. OFN/SPEC/BMCS/M91/M92/PFB/00, AS PER DRAWING No.BMCS-M91-M92-PFB-01 , QAP NO. OFN/QAP/BMCS/M92/M91/PFB/00 DATED 04.04.2024 REV. 00 & AS PER MI NO.OFN/MI/BMCS/M91/M92/PFB/00 DATED 09.12.2024

PLASTIC FILM BAG FOR BMCS, SPECIFICATION NO. OFN/SPEC/BMCS/M91/M92/PFB/00, AS PER DRAWING No.BMCS-M91-M92-PFB-01 , QAP NO. OFN/QAP/BMCS/M92/M91/PFB/00 DATED 04.04.2024 REV. 00 & AS PER MI NO.OFN/MI/BMCS/M91/M92/PFB/00 DATED 09.12.2024

• AS PER QAP

• AS PER QAP

IGNITER BAG (FOR M-92) AS PER QAP No. OFN/QAP/BMCS/M92/IB/00 Dated 04.04.2024, SPECIFICATION No. OFN/SPEC/RAW MAT/M92/IB/00 AND DRAWING NO.BMCS-M92-IB-01, BMCS-M92-IB-02, BMCS-M92-IB-04 & AS PER MI NO.OFN/MI/BMCS/M92/IB/00 REV 00 DATED 09.12.2024

IGNITER BAG (FOR M-92) AS PER QAP No. OFN/QAP/BMCS/M92/IB/00 Dated 04.04.2024, SPECIFICATION No. OFN/SPEC/RAW MAT/M92/IB/00 AND DRAWING NO.BMCS-M92-IB-01, BMCS-M92-IB-02, BMCS-M92-IB-04 & AS PER MI NO.OFN/MI/BMCS/M92/IB/00 REV 00 DATED 09.12.2024

• AS PER QAP

• AS PER QAP

TIN FOIL, AS PER SPECIFICATION No. OFN/SPEC/BMCS/M91/M92/TF/00(APPENDIX -05), DRAWING NO. BMCS-M91-M92-TF-01 , QAP No. OFN/QAP/BMCS/M91/M92/TF/00 DATED 10.04.2024 & AS PER MI NO.OFN/MI/BMCS/M91/M92/TF/00 DATED 04.12.2024

TIN FOIL, AS PER SPECIFICATION No. OFN/SPEC/BMCS/M91/M92/TF/00(APPENDIX -05), DRAWING NO. BMCS-M91-M92-TF-01 , QAP No. OFN/QAP/BMCS/M91/M92/TF/00 DATED 10.04.2024 & AS PER MI NO.OFN/MI/BMCS/M91/M92/TF/00 DATED 04.12.2024

• AS PER QAP

• AS PER QAP

ELECTRONIC PERCUSSION FUZE FOR SHELL 155 MM (WITHOUT BOOSTER PALLET) AS PER SPECIFICATION NO.3094/PYRO/R&D DATED 30.09.2025

ELECTRONIC PERCUSSION FUZE FOR SHELL 155 MM (WITHOUT BOOSTER PALLET) AS PER SPECIFICATION NO.3094/PYRO/R&D DATED 30.09.2025

• AS PER TECHNICAL SPECIFICATION

• AS PER TECHNICAL SPECIFICATION

A). SHELL EMPTY ASSY(M2)TO DRG. NO. 2439A11001 ASSY AS PER NOTE 1, 2 & 3 AS MENTIONED B). ADAPTER BOAT TAIL TO DRG. NO. 2440A10002.DC-37535-A, 22.10.19 C). BOAT TAIL MACHINED TO DRG. NO. 155-1150.DC-37546-A, 01.02.20. PLUG LIFTING M9039A1 TO DRG. NO. 2439A00018 DC-37535-A, 22.10.19

A). SHELL EMPTY ASSY(M2)TO DRG. NO. 2439A11001 ASSY AS PER NOTE 1, 2 & 3 AS MENTIONED B). ADAPTER BOAT TAIL TO DRG. NO. 2440A10002.DC-37535-A, 22.10.19 C). BOAT TAIL MACHINED TO DRG. NO. 155-1150.DC-37546-A, 01.02.20. PLUG LIFTING M9039A1 TO DRG. NO. 2439A00018 DC-37535-A, 22.10.19

DETAILED DRAWINGS / SPECIFICATIONS MAY BE OBTAINED FROM CQA (A), KHADKI, PUNE

• AS PER SPECIFICATION & DRAWINGS
• FORGING, MACHINING
• DETAILED DRAWINGS / SPECIFICATIONS MAY BE OBTAINED FROM CQA (A), KHADKI, PUNE
• DETAILED DRAWINGS / SPECIFICATIONS MAY BE OBTAINED FROM CQA (A), KHADKI, PUNE
• DETAILED DRAWINGS / SPECIFICATIONS MAY BE OBTAINED FROM CQA (A), KHADKI, PUNE

• AS PER SPECIFICATION & DRAWINGS
• DETAILED DRAWINGS / SPECIFICATIONS MAY BE OBTAINED FROM CQA (A), KHADKI, PUNE
• DETAILED DRAWINGS / SPECIFICATIONS MAY BE OBTAINED FROM CQA (A), KHADKI, PUNE
• DETAILED DRAWINGS / SPECIFICATIONS MAY BE OBTAINED FROM CQA (A), KHADKI, PUNE
• DETAILED DRAWINGS / SPECIFICATIONS MAY BE OBTAINED FROM CQA (A), KHADKI, PUNE

Guanidine Nitrate as per Specification No.: JSS 6810-95:2023 (Rev. No. 5) DC No.- 6673-ME Dt. 08/07/2024

Specification No.: JSS 6810-95:2023 (Rev. No. 5) DC No.- 6673-ME Dt. 08/07/2024

• As per attached document

• As per attached document

REEL 1A/L PACKAGE AMMN 79-A TO DRG NO. OFBA/CX/54 DT. 8.4.93 AMD.DT: 31.07.20. ALTERNATE METHODE. PLYWOOD GENERAL PURPOSE MR GRADE TYPE BB TO IS: 303-1989 (REV-3)(REAFFIRM2018) STEEL RIB IS 1079-2017 (REV-7) (REAFFIRM2022) OR IS513 (PT-1)-2016. REV-6. VARNISH A/D AMMN. TO SPECN. IND/ME/719 (d) DC3754-ME, DT 12.12.02.

SPECN. IND/ME/719 (d) DC3754-ME, DT 12.12.02.

DRG NO. OFBA/CX/54 DT. 8.4.93 AMD.DT: 31.07.20.

• MSME

• NABL/ Govt. Lab reports for each components.

CRATE 5 A/L WIRE BOUND FOR PACKAGE AMM. 79A TO DRG. NO. OFBA/CX/55 DTS-16.08.94 AMMENDED ON 15.02.02 TRACED FROM CI (A)/AMN/754 PART NO ISV 326A DC (I) 30562-A SPECN.IA 948 (a. f ) DC 36081A.

SPECN.IA 948 (a. f ) DC 36081A.

DRG. NO. OFBA/CX/55 DTS-16.08.94 AMMENDED ON 15.02.02 TRACED FROM CI (A)/AMN/754 PART NO ISV 326A DC (I) 30562-A

• MSME

• NABL / Govt. Lab. reports for each components

PLYWOOD C-26 BOX AS PER OFBA SPECIFICATION NO. 1.56 DTD. 09.02.2023 WITH DRAWING NO. OFBA/BT/120 ATTACHED.

OFBA SPECIFICATION NO. 1.56 DTD. 09.02.2023

DRAWING NO. OFBA/BT/120

• MSME

• NABL / Govt. Lab reports for each components

JSS 9530-02-2020 (Fourth Revision)

JSS 9530-02-2020 (Fourth Revision)

• Lead Antimony Alloy Melting Furnace

• Spectroscopy

IS:1654-1992(THIRD REVISION), GRADE PBSB2

IS:1654-1992(THIRD REVISION), GRADE PBSB2

• Lead Antimony Alloy Melting Furnace

• Spectroscopy

Lead Antimony Alloy Wire Dia 4.22 mm (+/- 0.05 mm) With Sb 2% (+/-0.2%) Other Terms and Conditions as per OFV Specifications Dated 12/02/2025

Lead Antimony Alloy Wire Dia 4.22 mm (+/- 0.05 mm) With Sb 2% (+/-0.2%) Other Terms and Conditions as per OFV Specifications Dated 12/02/2025

• Lead Antimony Alloy Melting Furnace
• Lead Antimony Alloy Billet Casting
• Lead Antimony Alloy Wire Extrusion Press
• Automatic Wire Reeling Machine

• Spectroscopy
• Micrometer

Lead Antimony Alloy Wire Dia 5.70 mm (+/- 0.05 mm) With Sb 2% (+/-0.2%) Other Terms and Conditions as per OFV Specifications Dated 12/02/2025

Lead Antimony Alloy Wire Dia 5.70 mm (+/- 0.05 mm) With Sb 2% (+/-0.2%) Other Terms and Conditions as per OFV Specifications Dated 12/02/2025

• Lead Antimony Alloy Melting Furnace
• Lead Antimony Alloy Billet Casting
• Lead Antimony Alloy Wire Extrusion Press
• Automatic Wire Reeling Machine

• Spectroscopy
• Micrometer

Lead Antimony Alloy Wire Dia 5.80 mm (+/- 0.05 mm) With Sb 2% (+/-0.2%) Other Terms and Conditions as per OFV Specifications Dated 12/02/2025

Lead Antimony Alloy Wire Dia 5.80 mm (+/- 0.05 mm) With Sb 2% (+/-0.2%) Other Terms and Conditions as per OFV Specifications Dated 12/02/2025

• Lead Antimony Alloy Melting Furnace
• Lead Antimony Alloy Billet Casting
• Lead Antimony Alloy Wire Extrusion Press
• Automatic Wire Reeling Machine

• Spectroscopy
• Micrometer

Lead Antimony Alloy Wire Dia 5.60 mm (+/- 0.05 mm) With Sb 2% (+/-0.2%) Other Terms and Conditions as per OFV Specifications Dated 12/02/2025

Lead Antimony Alloy Wire Dia 5.60 mm (+/- 0.05 mm) With Sb 2% (+/-0.2%) Other Terms and Conditions as per OFV Specifications Dated 12/02/2025

• Lead Antimony Alloy Melting
• Lead Antimony Alloy Billet Casting
• Lead Antimony Alloy Wire Extrusion Press
• Automatic Wire Reeling Machine

• Spectroscopy
• Micrometer

Base Bleed Motor with Adaptor

Base Bleed Motor with Adapter as per OFI technical specification no. 51/BBU/ (Motor & Adaptor)/GMP/OFI Dt. 15/09/2025

As per Drawing No. (1) for Base Bleed Motor: 02676-20001A203 dtd. 03/08/2007, (2) for Adaptor: 02676-20011A02 dtd. 03/08/2007

• As per attached document

• As per attached document

FILLED FUZES WITH BODY ASSEMBLY & FRAGMENT JACKET

FILLED FUZES WITH BODY ASSEMBLY & FRAGMENT JACKET AS PER TBRL DRG.NO. TBRL/MMG-H/MK1/A00/R3.(9911358911)

• TO BE UPLOADED

• TO BE UPLOADED

PLASTIC PACKAGE FOR TAIL UNIT OF 1000 KG GP AS PER SPECN NO.DRDO-ARDE-ADM-GP-1000-02-2023

PLASTIC PACKAGE FOR TAIL UNIT OF 1000 KG GP AS PER SPECN NO.DRDO-ARDE-ADM-GP-1000-02-2023

SPECN NO.DRDO-ARDE-ADM-GP-1000-02-2023

• SPECN NO.DRDO-ARDE-ADM-GP-1000-02-2023
• PLASTIC PACKAGE FOR TAIL UNIT OF 1000 KG GP AS PER SPECN NO.DRDO-ARDE-ADM-GP-1000-02-2023
• PLASTIC PACKAGE FOR TAIL UNIT OF 1000 KG GP AS PER SPECN NO.DRDO-ARDE-ADM-GP-1000-02-2023
• PLASTIC PACKAGE FOR TAIL UNIT OF 1000 KG GP AS PER SPECN NO.DRDO-ARDE-ADM-GP-1000-02-2023
• PLASTIC PACKAGE FOR TAIL UNIT OF 1000 KG GP AS PER SPECN NO.DRDO-ARDE-ADM-GP-1000-02-2023

• PLASTIC PACKAGE FOR TAIL UNIT OF 1000 KG GP AS PER SPECN NO.DRDO-ARDE-ADM-GP-1000-02-2023
• PLASTIC PACKAGE FOR TAIL UNIT OF 1000 KG GP AS PER SPECN NO.DRDO-ARDE-ADM-GP-1000-02-2023
• PLASTIC PACKAGE FOR TAIL UNIT OF 1000 KG GP AS PER SPECN NO.DRDO-ARDE-ADM-GP-1000-02-2023
• PLASTIC PACKAGE FOR TAIL UNIT OF 1000 KG GP AS PER SPECN NO.DRDO-ARDE-ADM-GP-1000-02-2023
• PLASTIC PACKAGE FOR TAIL UNIT OF 1000 KG GP AS PER SPECN NO.DRDO-ARDE-ADM-GP-1000-02-2023

SHELL BODY WITH DRIVING BAND 107 TO TO DRG.NO.3060202DC:36490-ADTD.19.11.1998 AND SURFACETREATED AS PER DRG.NO.3060203 DC:36490-ADTD.19.11.98 EXTERNALLY PAINTED WITH PAINT OLIVE GREEN RAL 6003 MATT FINISH TO DEFENCE STANDARD:DEF STAN 80-25 ISSUE-5 2009(PAINT AMMUNITION FINISHING, STOVING& DIPPING TYPES).INTERNALLYOIL SEALED WITH LIFTING PLUG TO DRG.NO.5191856 DC NO.37595-A DTD.08.12.21 AND GASKET TO DRG.NO.6391043 DC NO.36695-A DTD. 08.08.2000, LOOSELY FITTED.

SHELL BODY WITH DRIVING BAND 107 TO TO DRG.NO.3060202DC:36490-ADTD.19.11.1998 AND SURFACETREATED AS PER DRG.NO.3060203 DC:36490-ADTD.19.11.98 EXTERNALLY PAINTED WITH PAINT OLIVE GREEN RAL 6003 MATT FINISH TO DEFENCE STANDARD:DEF STAN 80-25 ISSUE-5 2009(PAINT AMMUNITION FINISHING, STOVING& DIPPING TYPES).INTERNALLYOIL SEALED WITH LIFTING PLUG TO DRG.NO.5191856 DC NO.37595-A DTD.08.12.21 AND GASKET TO DRG.NO.6391043 DC NO.36695-A DTD. 08.08.2000, LOOSELY FITTED.

• Shear cutting machine/Band saw for cutting billets having capacity minimum 15,000 Nos per month, Induction Furnace of capacity minimum 1000 KW for heating Billets, Hydraulic press for forging of capacity minimum 1000 MT, Press for nosing operation of capacity minimum 01 MT, Crimping Machine for Copper Band Crimping of capacity minimum 300 T, Hydraulic Pressure testing machine for capacity minimum 600 Bar, CNC machine for machining operation of capacity minimum 10,000 Nos. per month, MPI facility for capacity minimum 5,000 Amp, Seam Welding machine of capacity to weld minimum 10,000 Nos Shells per month, Ultrasonic machine for ultrasonic immersion method to cover all the portions of the shell volumetrically including the Flat bottom hole, Phosphating & Painting Facility @ minimum 10,000 Nos. shells per month, Shot blasting facility/machine, Quality control equipment for dimensional and quality checks.
• Manufacturing facility or Tie-up/MOU for Lifting Plug and Gasket

• Hydraulic Pressure testing machine for capacity minimum 600 Bar, MPI facility for capacity minimum 5,000 Amp, Ultrasonic machine for ultrasonic immersion method to cover all the portions of the shell volumetrically including the Flat bottom hole, Quality control equipment for dimensional and quality checks.

BASE PLATE 8.5MM PART NO. 404028661 TO OEM DRG.NO.304059505 TRD DRG.NO.2.2.2527

BASE PLATE 8.5MM PART NO. 404028661 TO OEM DRG.NO.304059505 TRD DRG.NO.2.2.2527

BASE PLATE 8.5MM PART NO. 404028661 TO OEM DRG.NO.304059505 TRD DRG.NO.2.2.2527

• as per file attached

• as per file attached

CABLE TIE PART NO. 4102077 TO OEM DRG NO.304094816/TRD DRG NO.3.2.2674

CABLE TIE PART NO. 4102077 TO OEM DRG NO.304094816/TRD DRG NO.3.2.2674

CABLE TIE PART NO. 4102077 TO OEM DRG NO.304094816/TRD DRG NO.3.2.2674

• (I) INJECTION MOULDING FACILITY (II) DIMENSION MEASURING FACILITY

• (III) RELEVANT INSPECTION AND TESTING FACILITY

PACKAGE TO DRG.NO.ARDE 08040002000000000PB,DTD 14/05/2015.

PACKAGE TO DRG.NO.ARDE 08040002000000000PB,DTD 14/05/2015.

PACKAGE TO DRG.NO.ARDE 08040002000000000PB,DTD 14/05/2015.

• (i) Rubber Mixing Mill or Kneading M/C (ii) Extruder m/c (iii) Pulverizing m/c (iv) Roto Moulding Process / plastic injection moulding m/c (v) Grinder (vi) Drill Machine

• (vii) Other relevant Inspection & Testing facility

SET OF INNER PACKING FITMENT FOR PACKING OF FUZE ASSEMBLY TO TBRL DRG.NO.9774 DET NO.2(PIECE HOUSING-II)3 NOS.IN A SETWITH PIECE PACKING TO TBRL DRG.NO.9774 DET.4 2 NOS IN A SETFOR MULTI MODE HAND GRENADE. (LF-9911358099)

SET OF INNER PACKING FITMENT FOR PACKING OF FUZE ASSEMBLY TO TBRL DRG.NO.9774 DET NO.2(PIECE HOUSING-II)3 NOS.IN A SETWITH PIECE PACKING TO TBRL DRG.NO.9774 DET.4 2 NOS IN A SETFOR MULTI MODE HAND GRENADE. (LF-9911358099)

• TO BE UPLOADED

• TO BE UPLOADED

CAP TO DRG.NO.9-0643/9- -104/1,DC. 37511-A,DT-11.12.18.

CAP TO DRG.NO.9-0643/9- -104/1,DC. 37511-A,DT-11.12.18.

• SUITABLE PRESS MACHINE,SUITABLE SURFACE TREATMENT FACILITY OR TIE-UP FOR THE SAME,SUITABLE FINISHING FACILITY

• SUITABLE MEASURING FACILITY

POLYSTER TAPE (PART NO.405006545,DRAWING NO.305127351) FOR BURSTER OF 84MM SMOKE-469C AMMN. (LF-2101776135)

POLYSTER TAPE (PART NO.405006545,DRAWING NO.305127351) FOR BURSTER OF 84MM SMOKE-469C AMMN. (LF-2101776135)

• TO BE UPLOADED

• TO BE UPLOADED