FORGING FOR MAIN SHAFT STLN- BS-III, DRG. NO. F3318711-3

FORGING FOR MAIN SHAFT STLN- BS-III, DRG. NO. F3318711-3

DRG. NO. F3318711-3

FORGING FOR(CONST.MESH GEAR) HELICAL GEAR LAY SHAFT, STLN-BS-III, PT. NO. F 1668511-3

FORGING FOR(CONST.MESH GEAR) HELICAL GEAR LAY SHAFT, STLN-BS-III, PT. NO. F 1668511-3

DRG. NO. F 1668511-3

FORGING FOR(5th GEAR ON LAY SHAFT) HELICAL GEAR STLN -BS-III, PART NO. F 1668711-3

FORGING FOR(5th GEAR ON LAY SHAFT) HELICAL GEAR STLN -BS-III, PART NO. F 1668711-3

DRG. NO. F 1668711-3

FORG.FOR 3rd GEAR ON LAY SHAFT, STLN-BS-III, PART NO. F1668611-3

FORG.FOR 3rd GEAR ON LAY SHAFT, STLN-BS-III, PART NO. F1668611-3

DRG. NO. F1668611-3

FORG.FOR 4th GEAR ON LAY SHAFT, STLN- BS-III, PART NO. F1607211-3

FORG.FOR 4th GEAR ON LAY SHAFT, STLN- BS-III, PART NO. F1607211-3

DRG. NO. F1607211-3

FORGING FOR RING FOR OIL SEAL OUTER, DRG. No. F 0741011 -3

FORGING FOR RING FOR OIL SEAL OUTER, DRG. No. F 0741011 -3

DRG. No. F 0741011 -3

FORGING FOR THRUST COLLAR/RING, DRG. No. X 3402115 -3B

FORGING FOR THRUST COLLAR/RING, DRG. No. X 3402115 -3B

DRG. No. X 3402115 -3B

FORGING FOR DISTANCE RING, DRG. NO. Z 1201311 -A

FORGING FOR DISTANCE RING, DRG. NO. Z 1201311 -A

DRG. NO. Z 1201311 -A

FORG.FOR HUB FOR STG. PIVOT, DRG. No. Z1803211- (R2)

FORG.FOR HUB FOR STG. PIVOT, DRG. No. Z1803211- (R2)

DRG. No. Z1803211- (R2)

FORGING FOR PIN, DRG. No. PS-0932111

FORGING FOR PIN, DRG. No. PS-0932111

DRG. No. PS-0932111

FORGING FOR NEEDLE HOUSING, DRG. No. D 9045415 -3A 0384F

FORGING FOR NEEDLE HOUSING, DRG. No. D 9045415 -3A 0384F

DRG. No. D 9045415 -3A

FORGING FOR SELECTOR PLATE, F-2437614-3(A)

FORGING FOR SELECTOR PLATE, F-2437614-3(A)

DRG. NO. F-2437614-3(A)

FORGING FOR SELECTOR PLATE, F2437514-3 (A)

FORGING FOR SELECTOR PLATE, F2437514-3 (A)

DRG. NO. F2437514-3 (A)

FORGING FOR ACTUATER, DRG. No. Z-1802911(R1) PART NO. X1802911

FORGING FOR ACTUATER, DRG. No. Z-1802911(R1) PART NO. X1802911

DRG. NO. Z-1802911(R1)

FORGING FOR RING FOR OIL SEAL INNER, DRG. No.F 0741111-3

FORGING FOR RING FOR OIL SEAL INNER, DRG. No.F 0741111-3

DRG. No.F 0741111-3

FORGING FOR DRIVING FLANGE DRG.NO. PS1433111(R1)

FORGING FOR DRIVING FLANGE DRG.NO. PS1433111(R1)

DRG.NO. PS1433111(R1)

TURRET ELECTRIC EQUIPMENT 678 95 CB5 KIT B

TURRET ELECTRIC EQUIPMENT 678 95 CB5 KIT B

FORGING FOR DRIVING SHAFT, .FXL.PT.NO. SD9056311(R2)

FORGING FOR DRIVING SHAFT, .FXL.PT.NO. SD9056311(R2)

SD9056311(R2)

FORG. FOR GEAR INPUT LOW, STLN- BS-III, PT. NO. X1602411-3 (R1)

FORG. FOR GEAR INPUT LOW, STLN- BS-III, PT. NO. X1602411-3 (R1)

DRG. NO. X1602411-3 (R1)

FORG. FOR GEAR ON LAY SHAFT/GEAR LAY SHAFT, STLN- BS-III, PART NO. X1602611-3(R2)

FORG. FOR GEAR ON LAY SHAFT/GEAR LAY SHAFT, STLN- BS-III, PART NO. X1602611-3(R2)

DRG. NO. X1602611-3(R2)

FORG. FOR INPUT SHAFT, STLN.-BS-III, PART NO. X3303611-3(R1)

FORG. FOR INPUT SHAFT, STLN.-BS-III, PART NO. X3303611-3(R1)

DRG. NO. X3303611-3(R1)

FORGING FOR OUT PUT SHAFT FRONT, DRG. NO.PS3344611(R2)

FORGING FOR OUT PUT SHAFT FRONT, DRG. NO.PS3344611(R2)

DRG. NO. PS3344611(R2)

AL.FORGING FOR BODY COVER DRG.NO. SKM-174*

AL.FORGING FOR BODY COVER DRG.NO. SKM-174*

AL.FORGING FOR BODY COVER DRG.NO. SKM-174*

FORG. FOR STEERING LEVER, PART NO.X3206711-3

FORG.FOR STEERING LEVER, PART NO.X3206711-3

X3206711#-3

FORGING FOR HUB FRONT, DRG.No. Z-1803011 -(b)

FORGING FOR HUB FRONT, DRG.No. Z-1803011 -(b)

DRG.No. Z-1803011 -(b)

MOD. COMPOSITE ARMOUR RHS & LHS FOR UPGRADED MPV 4X4DRG. NO. – 2687-57-31

ODC-VFJ/SP/COMPOSITE ARMOUR/02 Dated 23.10.2019

2687-57-31

• As per Specs, Drawing, QAI

• As per Specs, Drawing, QAI

SOCKET FOR HARNESS

DRG.NO.ADRDE/1387 (a)

YELLOW/WHITE LINE RIP PIN. (SHEET 1 OF 8)

DRG. NO.: ADRDE/1322(b) DRD/66/98.

• As per Specification/Drawing

• As per Specification/Drawing

ITO COATING ON PROTECTIVE GLASS AS PER DRAWING NO. Y7168653 OF IP3-3 MATERIAL WILL BE SUPPLIED BY OLF

ITO COATING ON PROTECTIVE GLASS AS PER DRAWING NO. Y7168653 OF IP3-3 MATERIAL WILL BE SUPPLIED BY OLF

Y7168653

• FIRM NEEDS TO SUBMIT DETAILS OF MANUFCTURING FACILITIES FOR SUBJEC ITEM

• FIRM NEEDS TO SUBMIT DETAILS OF TESTING FACILITIES FOR SUBJEC ITEM

ITEM REQUIRED FOR RED DOT SIGHT

OLF/R&D/RDS/001.07

OLF/R&D/RDS/001.07OLF/R&D/RDS/001.07

INERTIA PROOF QUICK RELEASE FITTING 4 POINT QUANTITY = 01. DRAWING NO. ADRDE/209(b) CONNECTING LUG LARGE QUANTITY = 02. DRAWING NO. ADRDE/1305(a) CONNECTING LUG SMALL QUANTITY = 02. DRAWING NO. ADRDE/1365(c)

INERTIA PROOF QUICK RELEASE FITTING 4 POINT QUANTITY = 01. DRAWING NO. ADRDE/209(b) CONNECTING LUG LARGE QUANTITY = 02. DRAWING NO. ADRDE/1305(a) CONNECTING LUG SMALL QUANTITY = 02. DRAWING NO. ADRDE/1365(c)

AMMUNITION RACK ASSY

AMMUNITION RACK ASSY

2014550

DETACHABLE SHROUD LINK

DETACHABLE SHROUD LINK

DRG. NO.:ADRDE/1299-G(c) DRD/32/98

• As per Drawing/specification

• As per Drawing/specification

TOWING RING 20MM.ID ADRDE/1402-02-002

DRG.NO.ADRDE/1402-02-002.

DRG.NO.ADRDE/1402-02-002.

HAMMER (MIM ROUTE) FOR JVPC 5.56X30 MM TO DRG.NO.0204-03-04-02-14-007-00DA

HAMMER (MIM ROUTE) FOR JVPC 5.56X30 MM TO DRG.NO.0204-03-04-02-14-007-00DA

TO DRG.NO.0204-03-04-02-14-007-00DA

• MIM ROUTE

• Chemical and mechanical properties as per std. given drawing
• Dimensional inspection for all dimensions given in the drawing and other parameter which are mentioned in relevant drawing.

FRP ASSY DRINKING WATER TANKS AND PIPE LINES TO DRG NO 6795 132 CB3101

FRP ASSY DRINKING WATER TANKS AND PIPE LINES TO DRG NO 6795 132 CB3101

FORGING FOR BUFFER BODY (LOWER) TO DRG.NO GCF MN 5521 MATL.-IS:734-1975 (RE AFFIRMED 2001) DESIGNATION 24534 'W' CONDITION.

FORGING FOR BUFFER BODY (LOWER) TO DRG.NO GCF MN 5521 MATL.-IS:734-1975 (RE AFFIRMED 2001) DESIGNATION 24534 'W' CONDITION.

Aluminum Casting for Buffer Body Lower (Process: Die Casting) to achieve Radiography level-II in high stress zone i.e. Lug portion of casting & Radiography level-III in relatively less stress zone i.e. remaining portion of body to Drg. No. GCF-MN-5474 (D)

Aluminum Casting for Buffer Body Lower (Process: Die Casting) to achieve Radiography level-II in high stress zone i.e. Lug portion of casting & Radiography level-III in relatively less stress zone i.e. remaining portion of body to Drg. No. GCF-MN-5474 (D)

GCF-MN-5474 (D)

OBTURATOR FO 125MM FSAPDS DOP 550MM

AS PER MONITORING INSTRUCTION NO.HAPP/QA/SC/G/033, ISSU NO.01, REV NO.02 DT:02/05/19

DRAWING NO.C OBT 125 6 501 0

ELECTROMAGNET EM 74M 000TY

AS PER ENCLOSED DRAWINGS

SINGLE WEAPON PACKING FOR TEAR GAS GUN

SINGLE WEAPON PACKING FOR TEAR GAS GUN

CAP EL-100 MF 20%, 63V Drg No.RS STOCK 493-856 CAPACITOR ELECTROLYTIC AXIAL TYPE100 MF +/-20%, 63V, RS STOCK NO 493-856

CAP EL-100 MF 20%, 63V Drg No.RS STOCK 493-856 CAPACITOR ELECTROLYTIC AXIAL TYPE100 MF +/-20%, 63V, RS STOCK NO 493-856

BULB OPMT-26-15 SPEC NO. TY16.535.662-77

BULB OPMT-26-15 SPEC NO. TY16.535.662-77

CAP POLY.MET. 0.22 MF 10%, 63V

CAP POLY.MET. 0.22 MF 10%, 63V

CAP ELECT.AXIAL 10 MF 10% 63V

CAP ELECT.AXIAL 10 MF 10% 63V

7441122006 RESISTER S2-33N-0,125-10KOHM Drg No.OZHO.467.093TU RESISTER S2-33N-0,125-10KOHM+/ -2%-A-V-V AS PER SPECN.NO, OZHO.467.093TU

7441122006 RESISTER S2-33N-0,125-10KOHM Drg No.OZHO.467.093TU RESISTER S2-33N-0,125-10KOHM+/ -2%-A-V-V AS PER SPECN.NO, OZHO.467.093TU

7440200367 RESISTOR SP5-21A-1-680 OHM Drg No.OZHO.468.530 TY RESISTOR SP5-21A-1-680 OHM +/- 1% AS PER SPECIFICATION NO. OZHO.468.530 TY

7440200367 RESISTOR SP5-21A-1-680 OHM Drg No.OZHO.468.530 TY RESISTOR SP5-21A-1-680 OHM +/- 1% AS PER SPECIFICATION NO. OZHO.468.530 TY

specn.no:-ADRDE/QMS/TDTM/SPECN/93

specn.no:-ADRDE/QMS/TDTM/SPECN/93

ASSEMBLY COIL SPRING

Drg. No. 1.3.01-02-01(b) except Mn% as per BS: 1408-M:1954 i.e. 0.25-0.75%

Drg. No. 1.3.01-02-01(b)

TYRE PNEUMATIC 12.00 X 20, PLY 18 "CC" PATTERN PT. NO. LV6/MT-14 2610 000301 AS PER SPECN NO..IND/VEH/2079/2018

TYRE PNEUMATIC 12.00 X 20, PLY 18 "CC" PATTERN PT. NO. LV6/MT-14 2610 000301 AS PER SPECN NO..IND/VEH/2079/2018

LV6/MT-14 2610 000301

• mixing , extrusion, rubberisation fabric, bead building, tyre building, curing of tyre, post cure inflation , trimming facility etc as per file attached

• visual check, dimensional check, material test- physical properties of tread and side wall rubber, load & inflation test, endurance test , Tyre strength test, ( plunger test, high speed test p[performance test , fitment & performance test , marking test& packing test etc as per file attached

TYRE PNEUMATIC 12.00 X 20, PLY 18 NYLON SAND CUM HIGHWAY PATTERN LV-6/MT-14/ 2610-000315 AS PER SPECN. NO. IND/2079/2018

TYRE PNEUMATIC 12.00 X 20, PLY 18 NYLON SAND CUM HIGHWAY PATTERN LV-6/MT-14/ 2610-000315 AS PER SPECN. NO. IND/2079/2018

LV-6/MT-14/ 2610-000315

• mixing , extrusion, rubberisation fabric, bead building, tyre building, curing of tyre, post cure inflation , trimming facility etc as per file attached

• visual check, dimensional check, material test- physical properties of tread and side wall rubber, load & inflation test, endurance test , Tyre strength test, ( plunger test, high speed test p[performance test , fitment & performance test , marking test& packing test as per file attached

1.TUBE INNER PNEU TYPE 12.00X20 WITH VALVE DOUBLE BEND 21MM VH63 MM TIP END 70 MM BEND 90 DEG LV/6/MT-142610000302/REF DRG 2.FLAP RUST SLIP ITTAC NO.20 RR NO.8.00/7.50 RIM, DRG NO. LV-6/MT,142610000250/REF DRG (PART NO. 2574.4010.6302) TUBE INNER PART NO 2574 4010 0119

1.TUBE INNER PNEU TYPE 12.00X20 WITH VALVE DOUBLE BEND 21MM VH63 MM TIP END 70 MM BEND 90 DEG LV/6/MT-142610000302/REF DRG 2.FLAP RUST SLIP ITTAC NO.20 RR NO.8.00/7.50 RIM, DRG NO. LV-6/MT,142610000250/REF DRG (PART NO. 2574.4010.6302) TUBE INNER PART NO 2574 4010 0119

LV-6/MT,142610000250/REF DRG (PART NO. 2574.4010.6302)

• AS PER FILE ATTACHED

• AS PER FILE ATTACHED

ASSY WATER TANK (INSULATED 55 LTRS. LPTA713TC/32 DRG NO. VFJ/16/09/000045(V4)

ASSY WATER TANK (INSULATED 55 LTRS. LPTA713TC/32 DRG NO. VFJ/16/09/000045(V4)

VFJ/16/09/00045(V4)

A4/5340-006721 BUCKLE WAIST ADJUSTABLE ADOPTER (SLIDING BAR TYPE) PTRM SPECN.NO.IND/GS/1802

SPECN.NO.IND/GS/1802

IND/GS/1802

ADRDE/292(d)

ADRDE/292(d)

ADRDE/292(d)

MANUFACTURING AND SUPPLY OF PREMACHINED BLANK S3 AS PER DRG NO TEND 2642 WITH OFT MATERIAL REQUIRED FOR K 4001 STAR 6 (BODY)

MANUFACTURING AND SUPPLY OF PREMACHINED BLANK S3 AS PER DRG NO TEND 2642 WITH OFT MATERIAL REQUIRED FOR K 4001 STAR 6 (BODY)

TEND 2642

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

ELECTRONIC TYPE ENGINE OIL PRESSURE INDICATING SYSTEM FITTED WITH 4 PIN PLUGS CONSISTS OF 1 PD IT 1 5 MPA K2 PRESSURE HEAD RECEIVER 2 UD 801 1 5 MPA K2 PRESSURE INDICATOR GUAGE

ELECTRONIC TYPE ENGINE OIL PRESSURE INDICATING SYSTEM FITTED WITH 4 PIN PLUGS CONSISTS OF 1 PD IT 1 5 MPA K2 PRESSURE HEAD RECEIVER 2 UD 801 1 5 MPA K2 PRESSURE INDICATOR GUAGE

FABRIC NYLON 48 +-2 GM ORANGE TWILL WEAVE 92 CM

SPECIFICATION:- ADRDE/SPECN/2002/56(b)(VARIETY NO.-1)

FARIC NYLON 48 +-2 GM U/D TWILL WEAVE 92 CM

SPECIFICATION : ADRDE/SPECN/2002/56(b)

CONVERTER PAG 1F TO SPECN 002 016 TY PART NO 730 80 K222 DS CAT PART NO Z 18 52 15 00 000 USE LCSO APPROVED COMPONENT OFMK

CONVERTER PAG 1F TO SPECN 002 016 TY PART NO 730 80 K222 DS CAT PART NO Z 18 52 15 00 000 USE LCSO APPROVED COMPONENT OFMK

BRUSH CLEANING FOR TEAR GAS GUN

BRUSH CLEANING FOR TEAR GAS GUN

MAGAZINE COVER PIPE FOR 12 BORE MODIFIED PUMP ACTION GUN,

MAGAZINE COVER PIPE FOR 12 BORE MODIFIED PUMP ACTION GUN,

RFI SK-9118-GG, MOTHER BOX FOR PACKING OF 05 NOS. OF SINGLEWEAPON PACKING OF TEAR GAS GUN.

AS PER DRAWING

RFI SK-9118-GG

PARA ARAMID WOVEN FABRIC.

PARA ARAMID WOVEN FABRIC. SPECIFICATION : AS PER ATTACHED FILE "SPECIFICATION".

ASSY MTG SPARE WHEEL CARRIER (WITHOUT LIFTING UNIT) (CONSISTING OF COMPONENTS AS PER LIST ATTACHED)

ASSY MTG SPARE WHEEL CARRIER (WITHOUT LIFTING UNIT) (CONSISTING OF COMPONENTS AS PER LIST ATTACHED)

2614 4030 0004 - V5

LPTA LOAD BODY COMP. WITH TROOP SEATS, CANVAS STRAPS, 5 TYPES OF MILITARY FITMENTS. PULLEY TOP (PIN PULLEY TOP) PULLEY BOTTOM (PIN PULLEY BOTTOM), WATER TANK STOOL, TAIL GATE STOPPER WITH RUBBER PAD, WATER TANK STRAPS- 2 NOS. TOP CHENNAL FOR W/T- 2/SET. ETC. CONSISTING OF ITEMS SL. NO. 1 TO 22 AS PER SHEET ATTACHED

LPTA LOAD BODY COMP. WITH TROOP SEATS, CANVAS STRAPS, 5 TYPES OF MILITARY FITMENTS. PULLEY TOP (PIN PULLEY TOP) PULLEY BOTTOM (PIN PULLEY BOTTOM), WATER TANK STOOL, TAIL GATE STOPPER WITH RUBBER PAD, WATER TANK STRAPS- 2 NOS. TOP CHENNAL FOR W/T- 2/SET. ETC. CONSISTING OF ITEMS SL. NO. 1 TO 22 AS PER SHEET ATTACHED

ASSY BUMPER FRONT

ASSY BUMPER FRONT

2154-8850-0101(V5)

ASSY SPARE WHEEL LIFTING UNIT - COMPLETE INCLUDING ASSEMBLY HANDLE AND ROPE TO DRG. NO. CONSISTING OF DRGS. AS PER LIST ATTACHED.

ASSY SPARE WHEEL LIFTING UNIT - COMPLETE INCLUDING ASSEMBLY HANDLE AND ROPE TO DRG. NO. CONSISTING OF DRGS. AS PER LIST ATTACHED.

V-350-2541-0026 (V-3)

SET of WASHER (LPTA) CONSISTING OF (1) PUNCHED WASHER TYPE -A 18 IS 2016 ST QTY 4/SET (II) WASHER SPRING B 16 IS 3063 QTY 4/SET (III) SPRING WASHER B 12 IS 3063 QTY 12/SET (IV) PUNCHED WASHER TYPE A 14 IS 2016 QTY 12/SET

SET of WASHER (LPTA) CONSISTING OF (1) PUNCHED WASHER TYPE -A 18 IS 2016 ST QTY 4/SET (II) WASHER SPRING B 16 IS 3063 QTY 4/SET (III) SPRING WASHER B 12 IS 3063 QTY 12/SET (IV) PUNCHED WASHER TYPE A 14 IS 2016 QTY 12/SET

PLAIN NUT M12 X 1.75 GALV. & YELLOW PASSIVATED DRG./PART NO. L-3011218 IS -1364-1992 PART - 3, P-8

PLAIN NUT M12 X 1.75 GALV. & YELLOW PASSIVATED DRG./PART NO. L-3011218 IS -1364-1992 PART - 3, P-8

PART NO. L-3011218

PLAIN NUT M12 X 1.5 (108-00) GALV. & YELLOW PASSIVATED PART NO. L-3021218 TO IS -1364-1992 PART - 3.P.8

PLAIN NUT M12 X 1.5 (108-00) GALV. & YELLOW PASSIVATED PART NO. L-3021218 TO IS -1364-1992 PART - 3.P.8

PART NO. L-3021218

SL. CH. HEAD SCREW M5X20L IS1366-4.8 Part No. 11390805-201 WITH HEX NUT M5 IS:1364 Part No. 1205-320050-6 (QTY 2 PER SET)

SL. CH. HEAD SCREW M5X20L IS1366-4.8 Part No. 11390805-201 WITH HEX NUT M5 IS:1364 Part No. 1205-320050-6 (QTY 2 PER SET)

Part No. 1205-320050-6

VFJ Name Plate & Logo in Hindi

VFJ Name Plate & Logo in Hindi

VFJ/16/09/00049(V-2)

U' BOLT WITH NUT 1.2614-7080-3202N-4/VEH 2.2614-7080-3203N- 2/VEH 3. 2614-7080 3204N- 2/VEHNUT 1. HEX NUT M12 IS 1364-S8- 16/VEH 2. HEX LOCK NUT M12 IS 1364-S8- 16/VEH

U' BOLT WITH NUT 1.2614-7080-3202N-4/VEH 2.2614-7080-3203N- 2/VEH 3. 2614-7080 3204N- 2/VEHNUT 1. HEX NUT M12 IS 1364-S8- 16/VEH 2. HEX LOCK NUT M12 IS 1364-S8- 16/VEH

261470803201-V2

PACKING FOR U CLAMP CONSISTING OF 3 ITEMS: 1. PACKING U-CLAMP (TAPER) DRG NO. 000891-0598J (V1) - 02 NOS. 2. PACKING U-CLAMP WITH SLOT DRG. NO. 000891-0298J (V2) - 02 NOS. 3. PACKING U-CLAMP (PLAIN) DRG. NO. VFJ/16/01/00051 - 4 NOS. (V1)

PACKING FOR U CLAMP CONSISTING OF 3 ITEMS: 1. PACKING U-CLAMP (TAPER) DRG NO. 000891-0598J (V1) - 02 NOS. 2. PACKING U-CLAMP WITH SLOT DRG. NO. 000891-0298J (V2) - 02 NOS. 3. PACKING U-CLAMP (PLAIN) DRG. NO. VFJ/16/01/00051 - 4 NOS. (V1)

000891-0598J (V1)

STUD FRONT 2154 7061 8801N NOTE:- TO BE SUPPLIED IN YELLOW PASSIVATED CONDITION

STUD FRONT 2154 7061 8801N NOTE:- TO BE SUPPLIED IN YELLOW PASSIVATED CONDITION

2154 7061 0401-V1

STUD REAR (M12X260 LENGTH) PART NO. 215470618802N NOTE:- TO BE SUPPLIED IN YELLOW PASSIVATED CONDITION

STUD REAR (M12X260 LENGTH) PART NO. 215470618802N NOTE:- TO BE SUPPLIED IN YELLOW PASSIVATED CONDITION

2154 7061 0401-V1

KEY RING WITH PLATE FOR LPTA

KEY RING WITH PLATE FOR LPTA

VFJ/16/09/00001-V1

VEHICLE IDENTIFICATION PLATE FOR LPTA 715TC/32 BS-III VEHICLE

VEHICLE IDENTIFICATION PLATE FOR LPTA 715TC/32 BS-III VEHICLE

VFJ/16/09/00010 V4

HEX NUT M16X2 GALVD. & YELLOW PASSIVATED IS - 1364-1992 PT. 111-P8

HEX NUT M16X2 GALVD. & YELLOW PASSIVATED IS - 1364-1992 PT. 111-P8

L3011618