Forging for Follower 00322 337 0417 50

Forging for Follower 00322 337 0417 50

332 337 0417 50

Forging for Steering Lever LH & RH Part No 312 338 1005- 50 Drg No 312 338 1005 50

Forging for Steering Lever LH & RH Part No 312 338 1005- 50 Drg No 312 338 1005 50

312 338 1005 50

Forging for Gear Rear Drg No 322 2820 211 50 (R1)

Forging for Gear Rear Drg No 322 2820 211 50 (R1)

322 2820 211 50 R1

Forging for Drive Shaft Drg No 322 2820 301 50 ( R1)

Forging for Drive Shaft Drg No 322 2820 301 50 ( R1)

322 2820 301 50 R1

Forging for Coupling Flange Part No 2730 3530 5001 3

Forging for Coupling Flange Part No 2730 3530 5001 3

2730 3530 5001 3

Forging for Coupling Flange DRG No 312 262 2045 3 (A)

Forging for Coupling Flange DRG No 312 262 2045 3 (A)

312 262 2045 3 (A)

Forging for Counter Shaft Drg No 322 2830 102 50

Forging for Counter Shaft Drg No 322 2830 102 50

322 2820 0102 50

"BOARD - STRAW TO SPECN.NO.JSS-8135-11-2014 (REVISION NO.3, SIZE - 762 X 1016 X 2.5MM "

"BOARD - STRAW TO SPECN.NO.JSS-8135-11-2014 (REVISION NO.3, SIZE - 762 X 1016 X 2.5MM "

LOCK OCK WITH BUCKLE

ADRDE/1354.

• As per Specification/Drawing

• As per Specification/Drawing

FEMALE COUPLING FOR CWL

DRG. NO. ADRDE/1344(b)

DRG. NO. ADRDE/1344(b)

• As per Specification

• As per Specification

"PAPER FOR CARTG.CASES AMMUNITION IN REELS OF 387.4MM WIDE 457.2MM X 508 MM DIA IN CRIMSON COLOUR TO SPECN. JSS 8135- 09-2004.(REV NO.2)"

"PAPER FOR CARTG.CASES AMMUNITION IN REELS OF 387.4MM WIDE 457.2MM X 508 MM DIA IN CRIMSON COLOUR TO SPECN. JSS 8135- 09-2004.(REV NO.2)"

"PAPER WHITE FINE AMMN. SPECN.: JSS - 9310 - 06 :2016 REV.1 SIZE :508 MM X 762 MM IN S/O 84 TO 92 GSM. D S CAT NO.9310-000 013."

SPECN.: JSS - 9310 - 06 :2016 REV.1 SIZE :508 MM X 762 MM IN S/O 84 TO 92 GSM. D S CAT NO.9310-000 013."

"EXPANDED POLYSTYRENE FOAM OF AVERAGE DENSITY 18 TO 25 KGS/M3 SIZE 1 MTR X 0.5 MTR X 25 MM THICK. "

AVERAGE DENSITY 18 TO 25 KGS/M3 SIZE 1 MTR X 0.5 MTR X 25 MM THICK

THERMISTOR, TOC-MD-5.75K +-0.7K SPECNNO:AV4681027TY (LF 9001120392)

THERMISTOR, TOC-MD-5.75K +-0.7K SPECNNO:AV4681027TY (LF 9001120392)

Drg No.SPECN.NO-AB4.681.025/028TY THERMISTER-TOC-D SPECN. NO-AB4 .681.025/028 TY

Drg No.SPECN.NO-AB4.681.025/028TY THERMISTER-TOC-D SPECN. NO-AB4 .681.025/028 TY

"ADHESIVE ANAEROBIC (LOCTITE-270) DRG.NO.3100-18005 DC 36552-A. DATE - 24-4-99"

(LOCTITE-270) DRG.NO.3100-18005 DC 36552-A. DATE - 24-4-99"

INERT COMPOSITION RD-1096 TO SPECN. IND/ME/899 (PROV)

SPECN. IND/ME/899 (PROV)

PHOTO SENSITIVE SOLUTION/SCREEN COAT FOR SCREEN MAKING.

GENERAL

RESIN HYLAK HSR-8111(HYLAC POLYEST)

HSR-8111 (HYLAC POLYEST)

Forging for Gear Front Drg No 312 282 2211 50 R1

Forging for Gear Front Drg No 312 282 2211 50 R1

Foring for Drive Shaft Front Axle Drg No 322 283 0605 3 R1

Foring for Drive Shaft Front Axle Drg No 322 283 0605 3 R1

322 2830 0605 3 R1

JSS 8135-13:1998

JSS 8135-13:1998

IS : 168 / 1993

IS : 168 / 1993

JSS-8030-20-1997

JSS-8030-20-1997

SHAFT SEAL

SHAFT SEAL

X2703800V2

SHAFT SEAL

SHAFT SEAL

Pt.No. X2703600#

SHAFT SEAL, PT.NO. X2703400(B),

SHAFT SEAL, PT.NO. X2703400(B),

X2703400(B)

SHAFT SEAL

SHAFT SEAL

Pt.No. X2703500

OIL SEAL

OIL SEAL

Pt.No. F2752700

OIL SEAL-AGB

OIL SEAL-AGB

Pt.No. X2701400-V1

OIL SEAL

OIL SEAL

Pt.No. F2701400-V1

OIL SEAL

OIL SEAL

Pt.No. X2702200

TEPER ROLLER BRG. (683/672)

TEPER ROLLER BRG. (683/672)

Pt.No. F0233010-2, ALT Pt.No.F0214410

TAPER ROLLER BRG.(580/572)

TAPER ROLLER BRG.(580/572)

Pt.No. F0230110#, ALT Pt.No. F0214310

ROL BRG. INNER(33019)

ROL BRG. INNER(33019)

Pt.No. X0202310

NEEDL ROLLER BRG NK 55/35

NEEDL ROLLER BRG NK 55/35

Pt.No. X0202410

NEEDLE ROLLER 3 X 15.8 BR

NEEDLE ROLLER 3 X 15.8 BR

Pt.No. F4300310-A

NEEDLE ROLLER 3 X 17.8 BR

NEEDLE ROLLER 3 X 17.8 BR

F4300310-A, Pt.No. F4300410-A

ROL BRG.OUTER SKF-30217

ROL BRG.OUTER SKF-30217

X0202210

CYL.ROLLER BRG.(NS-1911)

CYL.ROLLER BRG.(NS-1911)

X0202610

NEEDLE ROLLER BRG. MF-5030(50X38X30)

NEEDLE ROLLER BRG. MF-5030(50X38X30)

X0202510

CYL.ROLLER BEARING NJ2209EM

CYL.ROLLER BEARING NJ2209EM

X3548915-C, F0243810#

NEEDLE ROLLER BRG. NK90/25

NEEDLE ROLLER BRG. NK90/25

F0244910#

ROLLER BEARING NJ2210E

ROLLER BEARING NJ2210E

F0243610

BALL BEARING 6210

BALL BEARING 6210

F0232610

ROLLER BEARING L 064

ROLLER BEARING L 064

F0230910#

ROLLER BRG. NJ212E

ROLLER BRG. NJ212E

F0243710

IS-2307-2004

IS-2307-2004

BORON POWDER GR.I,PARTICLE SIZE 0.8 TO 0.9 MICROMETRE,PURITY] MIN 95% TO SPECN.NO.IND/ME/980 (PROV) DC-3844 ME DT.04/04/05

BORON POWDER GR.I,PARTICLE SIZE 0.8 TO 0.9 MICROMETRE,PURITY] MIN 95% TO SPECN.NO.IND/ME/980 (PROV) DC-3844 ME DT.04/04/05

0.05+0.01MM THICK ALUMINIUM FOIL COATED WITH ADHESIVE AND PROTECTED WITH RELEASE PAPER 300MM WIDE TO IS 737:2008 REV NO4 GRADE 19000 CONDITION "O" FOR FOIL AND PRESSURE SENSITIVE TAPE (PLASTICISED PVC BASE ) TYPE 2 TO IS 132 62-1992 REAFFIRMED 2003.

0.05+0.01MM THICK ALUMINIUM FOIL COATED WITH ADHESIVE AND PROTECTED WITH RELEASE PAPER 300MM WIDE TO IS 737:2008 REV NO4 GRADE 19000 CONDITION "O" FOR FOIL AND PRESSURE SENSITIVE TAPE (PLASTICISED PVC BASE ) TYPE 2 TO IS 132 62-1992 REAFFIRMED 2003.

ALLUMINIUM FOIL 50MM WIDE X 0.03MM THICK TO SPECN NO. IS 1705:1792 FIRST REV AMDT.NO.1 REAFFIRMED IN 1999

ALLUMINIUM FOIL 50MM WIDE X 0.03MM THICK TO SPECN NO. IS 1705:1792 FIRST REV AMDT.NO.1 REAFFIRMED IN 1999

CANVAS NYLON 425 GM GREY WIDTH 105 CM

SPECN-ADRDE/SPECN/1984/23(b)

• As Per Specification/Drawing

• As Per Specification/Drawing

0.05+0.01MM THICK ALUMINIUM FOIL COATED WITH ADHESIVE AND PROTECTED WITH RELEASE PAPER 300MM WIDE TO IS 737:2008 REV NO4 GRADE 19000 CONDITION "O" FOR FOIL AND PRESSURE SENSITIVE TAPE (PLASTICISED PVC BASE ) TYPE 2 TO IS 132 62-1992 REAFFIRMED 2003.

0.05+0.01MM THICK ALUMINIUM FOIL COATED WITH ADHESIVE AND PROTECTED WITH RELEASE PAPER 300MM WIDE TO IS 737:2008 REV NO4 GRADE 19000 CONDITION "O" FOR FOIL AND PRESSURE SENSITIVE TAPE (PLASTICISED PVC BASE ) TYPE 2 TO IS 132 62-1992 REAFFIRMED 2003.

ALUMINIUM FOIL 250MMXALUMINIUM FOIL TO SPECN-IS:737:2008 (REV NO.4) DESIG 40800 [SOFT ANNEALLED, TEMPERED CONDITION '0' 250MM WIDE X 0.04MM THICK0.04MM THICK

ALUMINIUM FOIL 250MMXALUMINIUM FOIL TO SPECN-IS:737:2008 (REV NO.4) DESIG 40800 [SOFT ANNEALLED, TEMPERED CONDITION '0' 250MM WIDE X 0.04MM THICK0.04MM THICK

SHAVE OUTER TO PART NO 4018739

SHAVE OUTER TO PART NO 4018739

• SHEAVE OUTER TO PART NO 4018739

• SHEAVE OUTER TO PART NO 4018739

ALUMINIUM ALLOY 7075-T6510 SINGLE EXTRUDED BARS DIA 135MM ACCORDING TO ASTM B 221M, AS PER HAPP SPECIFICATION NO. HAPP/QA/SPEC/008

HAPP/QA/SC/G/002 DATE OF ISSUE 23.02.19

Obturator for AMK-339

AS PER MONITORING INSTRUCTION NO. HAPP/QA/SC/AMK/002, ISSUE NO. 01, REV NO.01, DT. 03.12.2018,

C OBT 125 7 601 REV 0

BREECH SLIDE LOCKFOR 12 BORE PAG

BREECH SLIDE LOCKFOR 12 BORE PAG

PAG-0027/A

DUCK NYLON 230 GM STEEL GREY 91.4 CM WIDTH

SPECN.NO.ADRDE/SPECN./1984/23(d)

• As per Specification/Drawing

• As per Specification/Drawing

RIP CORD LARGE

ADRDE/282(d)

ADRDE/282(d)

INVESTMENT CASTING TO RFI SK. NO. 6097*12 FOR HINGE COVER.FOR RLFLE 5.56MM INSAS

INVESTMENT CASTING TO RFI SK. NO. 6097*12 FOR HINGE COVER.FOR RLFLE 5.56MM INSAS

RFI SK. NO. 6097*12

POWER SUPPLY SYSTEM 6795 89 CB6250 WITHOUT BATTERY

POWER SUPPLY SYSTEM 6795 89 CB6250 WITHOUT BATTERY

CASTOR WHEEL ASSY TO PART NO.1132630

CASTOR WHEEL ASSY TO PART NO.1132630

CASE INSTRUMENT STAND 2A & CLEANING ROD 3A,V5/1240-000336.

CASE INSTRUMENT STAND 2A & CLEANING ROD 3A,V5/1240-000336.

LAMP AIMING MG MK3 IN BOX,C1 1005-000720SHT-1,2 3 1005-000720.

LAMP AIMING MG MK3 IN BOX,C1 1005-000720SHT-1,2 3 1005-000720.

HDPE Dot coated Printed Fusible Interlining Fabric 150 cm

1) Raw Material : 100% Cotton 2) Count (Warp & Weft) : 30s 3) Ends per Inch : 76+/- 5 4) Picks per Inch : 76 +/- 5 5) Width : 150 cm (Min) 6) Weave : Plain 7) Coating : HDPE 8) Colour : White 9) GSM : 148 +5/-2.5% 10) Shrinkage % : As per Appendix A of IND/TC/2089(a) 11) Bond Strength (Kgs) : > 2.0 As per IND/TC/2089(a) 12) Packing & Marking : As per CQA(T&C) Kanpur Schedule No. CQA(T&C)/PMS/35(d). Except that : a. Fabric in roll form shall not be less than 40 Mtrs in running length without stitching/ basting in between. b. Roll weight shall not exceed 50 kgs. c. Each roll of fabric shall be wrapped separately with polypropylene plain sheet. final packing of 2 rolls in one W.P Gunny/HDPE sheet. d. Dimension for paper tubes of fabric roll: Outer Diameter-3.5 cm, Inner Diameter-2.5 cm Thickness-0.5 cm. e. Fabric selvedges shall be wound evenly at one edge. 13) Sampling plan : As per annexure.

Sampling Plan attached as Drawing file

THERMISTOR AB4681025/028 TY

THERMISTOR AB4681025/028 TY

Fabrication of Overall Combination Disruptive Pattern with Indian Army Logo Provisional Specification No. S/2764/OC Army Logo/TC-15 As per relevant clause of specification.

Fabrication of Overall Combination Disruptive Pattern with Indian Army Logo Provisional Specification No. S/2764/OC Army Logo/TC-15 As per relevant clause of specification.

• as per attached list (Manufacturing Technology Files )

• as per attached list (Testing / Inspection Facility Files )

IND/TC/4587 (d) & Approved samples

IND/TC/4587 (d) & Approved samples

BIPOD ASSEMBLY OR GUN MOUNT COMPLETE TO DRG F1303 028700 DOC NO 304059968 IN FINISHED CONDITION DC NO 19568 W DT 30 01 17

AS PER DRAWING

JOURNAL LF NO 9927094274

JOURNAL LF NO 9927094274

T-02/IC/8216003/122 M1

INV CASTING PRECISECAST LF NO 9927091584

INV CASTING PRECISECAST LF NO 9927091584

T-02/IC/8100000/046 M1

INV CASTING HANDLE LF NO 9927091564

INV CASTING HANDLE LF NO 9927091564

T-02/IC/8333020/038

INV CASTING SHACKLE LF NO 9927090643

INV CASTING SHACKLE LF NO 9927090643

B-21/IC/8669091/116 M1

INV CASTING HOLDER LF NO 9927090641

INV CASTING HOLDER LF NO 9927090641

B-21/IC/8637886/113 M2

COVER PLATE LF NO 9927084511

COVER PLATE LF NO 9927084511

T-02/IC/8604009/042 M1

INV CASTING PRECISE CAS LF NO 9927075122

INV CASTING PRECISE CAS LF NO 9927075122

T-02/IC/7027007/033 M1

TOOTHED QUADRANT LF NO 9927071797

TOOTHED QUADRANT LF NO 9927071797

B-21/IC/8483011/140 M1

INV CASTING BODY LF NO 9927071776

INV CASTING BODY LF NO 9927071776

B-21/IC/8020457/093 M1

INV CASTING BODY LF NO 9927070135

INV CASTING BODY LF NO 9927070135

T-02/IC/8020050/052 M1