TYPE- MONOEPOXY, COLOUR & APPEARANCE -BROWN CLEAR LIQUID, DENSITY AT 25 DEG. CEL. 0.985 g/ml, VISCOSITY AT 25 DEG. CEL. 100 cps. EPOSIDE EQUIVALENT 550+ 50

TYPE- MONOEPOXY, COLOUR & APPEARANCE -BROWN CLEAR LIQUID, DENSITY AT 25 DEG. CEL. 0.985 g/ml, VISCOSITY AT 25 DEG. CEL. 100 cps. EPOSIDE EQUIVALENT 550+ 50

DICHLOROMETHANE. AR GRADE, EX-S.D. FINE/GLAXO PURITY : MIN. 99.5 %, WATER : MAX. 0.02 % IN 2.5 LITRE PACKINGS.

DICHLOROMETHANE. AR GRADE, EX-S.D. FINE/GLAXO PURITY : MIN. 99.5 %, WATER : MAX. 0.02 % IN 2.5 LITRE PACKINGS.

DIAMYL PHTHALATE CONFORMING TO SPECN NO.IND/ME/872 : 2015 DC - 5383-ME, DT. 21.12.2015.

DIAMYL PHTHALATE CONFORMING TO SPECN NO.IND/ME/872 : 2015 DC - 5383-ME, DT. 21.12.2015.

• MSME

• DIAMYL PHTHALATE CONFORMING TO SPECN NO.IND/ME/872 : 2015 DC - 5383-ME, DT. 21.12.2015.

IND/ME/873(A)Prov.DC No.3754-ME,dated 12.12.2002

IND/ME/873(A)Prov.DC No.3754-ME,dated 12.12.2002

SPECN: IS 9591: 1996 (REAFFIRMED-2018) 1)RELATIVE DENSITY AT 20DEG C 0.913 TO 0.919G/CC2)REFRACTIVEINDEXAT 20 DEGC 1.450-1.454.3)WATER CONTENT:0.1%(MAX)4)ASH%:0.01(MAX) 5)ACIDITY(AS SEBACIC ACID):0.02%(MAX)6)ESTER CONTENT:99.5% (MIN) 7)MATTER OXIDIZABLE BY POTASSIUM DICHROMATE :0.3 % MAX

SPECN: IS 9591: 1996 (REAFFIRMED-2018) 1)RELATIVE DENSITY AT 20DEG C 0.913 TO 0.919G/CC2)REFRACTIVEINDEXAT 20 DEGC 1.450-1.454.3)WATER CONTENT:0.1%(MAX)4)ASH%:0.01(MAX) 5)ACIDITY(AS SEBACIC ACID):0.02%(MAX)6)ESTER CONTENT:99.5% (MIN) 7)MATTER OXIDIZABLE BY POTASSIUM DICHROMATE :0.3 % MAX

• MSME

• SPECN: IS 9591: 1996 (REAFFIRMED-2018) 1)RELATIVE DENSITY AT 20DEG C 0.913 TO 0.919G/CC2)REFRACTIVEINDEXAT 20 DEGC 1.450-1.454.3)WATER CONTENT:0.1%(MAX)4)ASH%:0.01(MAX) 5)ACIDITY(AS SEBACIC ACID):0.02%(MAX)6)ESTER CONTENT:99.5% (MIN) 7)MATTER OXIDIZABLE BY POTASSIUM DICHROMATE :0.3 % MAX

HULL ELECTRICAL EQUIPMENT 6795 82 CB6000 KIT B

HULL ELECTRICAL EQUIPMENT 6795 82 CB6000 KIT B

Specn-ERDL/TRIM/Prov/RM/5

Specn-ERDL/TRIM/Prov/RM/5

.(CATALYST)MERCK/ALDRICH. PURITY (TIN CONTENT)- >97%Molecular weight (MW)- 631.55 g/molDENSITY: 1 Ltr=1.05 KGMinimum assay (Sn)>97% - ONLY MERCK/ALDRICH MAKE ACCEPTABLE

.(CATALYST)MERCK/ALDRICH. PURITY (TIN CONTENT)- >97%Molecular weight (MW)- 631.55 g/molDENSITY: 1 Ltr=1.05 KGMinimum assay (Sn)>97% - ONLY MERCK/ALDRICH MAKE ACCEPTABLE

GALVANIZED STEEL SHEET TYPE DEEP DRAWING DESIGNATION B GPO TO SPECN. IS:277-2003. AS PER DRG. NO. OFBA/CX/51 DT.24.02.1989 & 05.01.2007 (FOR ITEM NO. 5 & 6) AMENDED ON DT.10.10.2008. TRACED FROM DRG.NO. DD (L) 16472 B AMENDED VIDE DC. NO. 37189-A DT. 22.09.2008. INCLUDING FELT DISC.

GALVANIZED STEEL SHEET TYPE DEEP DRAWING DESIGNATION B GPO TO SPECN. IS:277-2003. AS PER DRG. NO. OFBA/CX/51 DT.24.02.1989 & 05.01.2007 (FOR ITEM NO. 5 & 6) AMENDED ON DT.10.10.2008. TRACED FROM DRG.NO. DD (L) 16472 B AMENDED VIDE DC. NO. 37189-A DT. 22.09.2008. INCLUDING FELT DISC.

DRG. NO. OFBA/CX/51 DT.24.02.1989 & 05.01.2007 (FOR ITEM NO. 5 & 6) AMENDED ON DT.10.10.2008. TRACED FROM DRG.NO. DD (L) 16472 B AMENDED VIDE DC. NO. 37189-A DT. 22.09.2008. INCLUDING FELT DISC.

• MSME

• CYLINDER 443 MK1/L"GALVANIZED STEEL SHEET TYPE"DEEP DRAWING" DESIGNATION 'GPD' TO SPECN.IS:277-2003"AS PER DRG.NO OFBA/CX /51 DT 24/2/89 & 5/1/07 (FOR ITEM NO. 5 & 6) AMENDED ON DTD. 10.10.08 TRACED FROMDRG.NO DD(L) 16472 B AMENDED VIDE DC-37 189-A DT.22/09/08.INCLUDING FELT DISC.

CYLINDER 12A STEEL FOR AMMUNITION, CONTAINER ASSEMBLY 117A. AS PER DRG.NO CIA/AMN/1833, PART NO ISV 453A.(SERVICEABLE)/ DRG.NO.OFBA/NR/423 TO 428.

CYLINDER 12A STEEL FOR AMMUNITION, CONTAINER ASSEMBLY 117A. AS PER DRG.NO CIA/AMN/1833, PART NO ISV 453A.(SERVICEABLE)/ DRG.NO.OFBA/NR/423 TO 428.

DRG.NO CIA/AMN/1833, PART NO ISV 453A.(SERVICEABLE)/ DRG.NO.OFBA/NR/423 TO 428.

• MSME

• DRG.NO CIA/AMN/1833, PART NO ISV 453A.(SERVICEABLE)/ DRG.NO.OFBA/NR/423 TO 428.

CUTTING AND STITCHING OF CHARGE BAGS FOR CHARGE 9 OF 155MM AMMN.AS PER DRG.NO-6388103,6388104,6388106,6388115,6388116, 6355588,5191810,5173926,4090246,4090247,4079932. MATERIAL WILL BE SUPPLIED BY OFBA.

CUTTING AND STITCHING OF CHARGE BAGS FOR CHARGE 9 OF 155MM AMMN.AS PER DRG.NO-6388103,6388104,6388106,6388115,6388116, 6355588,5191810,5173926,4090246,4090247,4079932. MATERIAL WILL BE SUPPLIED BY OFBA.

CUTTING AND STITCHING OF CHARGE BAGS FOR CHARGE 9 OF 155MM AMMN.AS PER DRG.NO-6388103,6388104,6388106,6388115,6388116, 6355588,5191810,5173926,4090246,4090247,4079932. MATERIAL WILL BE SUPPLIED BY OFBA.

CUTTING & STITCHING OF CHARGE BAGS FOR M4A2 AS PER DRG.NO- 12882-2-0 TO 12884-2-0,12885-1-0,12886-0-0,12887-0-0,12888-1 -0,12890-2-0,NO 12909-0-0 , 12910-0-0,14776-0-0 TO 14778-0- 0,13976-0-0,12891-0-0,12899-0-0,12905-0-0. MATERIAL WILL BE SUPPLIED BY OFBA.

CUTTING & STITCHING OF CHARGE BAGS FOR M4A2 AS PER DRG.NO- 12882-2-0 TO 12884-2-0,12885-1-0,12886-0-0,12887-0-0,12888-1 -0,12890-2-0,NO 12909-0-0 , 12910-0-0,14776-0-0 TO 14778-0- 0,13976-0-0,12891-0-0,12899-0-0,12905-0-0. MATERIAL WILL BE SUPPLIED BY OFBA.

CUTTING & STITCHING OF CHARGE BAGS FOR M4A2 AS PER DRG.NO- 12882-2-0 TO 12884-2-0,12885-1-0,12886-0-0,12887-0-0,12888-1 -0,12890-2-0,NO 12909-0-0 , 12910-0-0,14776-0-0 TO 14778-0- 0,13976-0-0,12891-0-0,12899-0-0,12905-0-0. MATERIAL WILL BE SUPPLIED

• MSME

• CUTTING & STITCHING OF CHARGE BAGS FOR M4A2 AS PER DRG.NO- 12882-2-0 TO 12884-2-0,12885-1-0,12886-0-0,12887-0-0,12888-1 -0,12890-2-0,NO 12909-0-0 , 12910-0-0,14776-0-0 TO 14778-0- 0,13976-0-0,12891-0-0,12899-0-0,12905-0-0. MATERIAL WILL BE SUPPLIED BY OFBA.

CRUDE BEES WAX AS PER SPECIFICATION NO. IS-1504-1996 REAFFIRMED 2014.

CRUDE BEES WAX AS PER SPECIFICATION NO. IS-1504-1996 REAFFIRMED 2014.

• MSME

• CRUDE BEES WAX AS PER SPECIFICATION NO. IS-1504-1996 REAFFIRMED 2014.

CRATE 5 A/L WIRE BOUND FOR PACKAGE AMMUNITION 79A TO DRG.NO OFBA/CX/55 DTS-16.08.94 AMMENDED ON 15.02.02. TRACED FROM CI(A)/AMN/754 PART NO ISV 326A DC (I) 30562-A SPECN. IA 948 (a.f ) DC 36081A.

CRATE 5 A/L WIRE BOUND FOR PACKAGE AMMUNITION 79A TO DRG.NO OFBA/CX/55 DTS-16.08.94 AMMENDED ON 15.02.02. TRACED FROM CI(A)/AMN/754 PART NO ISV 326A DC (I) 30562-A SPECN. IA 948 (a.f ) DC 36081A.

DRG.NO OFBA/CX/55 DTS-16.08.94 AMMENDED ON 15.02.02

• MSME

• CRATE 5 A/L WIRE BOUND FOR PACKAGE AMMUNITION 79A TO DRG.NO OFBA/CX/55 DTS-16.08.94 AMMENDED ON 15.02.02. TRACED FROM CI(A)/AMN/754 PART NO ISV 326A DC (I) 30562-A SPECN. IA 948 (a.f ) DC 36081A.

Crepe/Natural Rubber Grade PLC-I or PLC-I -X to Defense Specification No. IND/ME/748(b), DC- 3754-ME, Dt:12/12/2002.

Crepe/Natural Rubber Grade PLC-I or PLC-I -X to Defense Specification No. IND/ME/748(b), DC- 3754-ME, Dt:12/12/2002.

• MSME

• Crepe/Natural Rubber Grade PLC-I or PLC-I -X to Defense Specification No. IND/ME/748(b), DC- 3754-ME, Dt:12/12/2002.

COTTON YARN NE 2/2 CONFORMING TO SPECIFICATION NO.IND/ME/800 DC3754-ME DTD. 12.12.2002 "MATERIAL TO BE SUPPLIED AS PER OFBaDrg.No.OFBA/CX/85 dt.22.03.2006 for Cotton Yarn NE 2/2 Bundle.

COTTON YARN NE 2/2 CONFORMING TO SPECIFICATION NO.IND/ME/800 DC3754-ME DTD. 12.12.2002 "MATERIAL TO BE SUPPLIED AS PER OFBaDrg.No.OFBA/CX/85 dt.22.03.2006 for Cotton Yarn NE 2/2 Bundle.

OFBaDrg.No.OFBA/CX/85 dt.22.03.2006 for Cotton Yarn NE 2/2 Bundle.

SPECN. NO. IND/ME/800-DC-3754-ME DATED 12.12.2000 & DRG NO. OFBA/CX/86 DT 23/03/2006 AMENDED ON DTD. 29/09/2008

SPECN. NO. IND/ME/800-DC-3754-ME DATED 12.12.2000 & DRG NO. OFBA/CX/86 DT 23/03/2006 AMENDED ON DTD. 29/09/2008

WHITE COLOURED CLOTH COTTON DOWN TIGHT TO SPECN. IND/ME/1005 (OCT.2012), DC 5105-ME DT.27-04-2013, WIDTH:1400 MM.

WHITE COLOURED CLOTH COTTON DOWN TIGHT TO SPECN. IND/ME/1005 (OCT.2012), DC 5105-ME DT.27-04-2013, WIDTH:1400 MM.

• MSME

• WHITE COLOURED CLOTH COTTON DOWN TIGHT TO SPECN. IND/ME/1005 (OCT.2012), DC 5105-ME DT.27-04-2013, WIDTH:1400 MM.

CORUGATED CARD BOARD SHEET EACH ST CONSIST OF A) PKG. SHEET IV HEMRL/ED/DRG NO. 002 DET NO.1 SIZE 470X180X10MM THK, 4 NOS/SET B)PKG. SHEET V DET NO.2 SIZE 170X160X20MM THK, 2 NOS/SET C)PKG. SHEETVI DET NO.3 SIZE 135X160X40MM THK, 1 NOS/SET D)PKG. SHEET VII DET NO.4 SIZE 410X160X25MM THK, 1 NOS/SET

CORUGATED CARD BOARD SHEET EACH ST CONSIST OF A) PKG. SHEET IV HEMRL/ED/DRG NO. 002 DET NO.1 SIZE 470X180X10MM THK, 4 NOS/SET B)PKG. SHEET V DET NO.2 SIZE 170X160X20MM THK, 2 NOS/SET C)PKG. SHEETVI DET NO.3 SIZE 135X160X40MM THK, 1 NOS/SET D)PKG. SHEET VII DET NO.4 SIZE 410X160X25MM THK, 1 NOS/SET

CORRUGATED SHEET ABC SIZE

CORRUGATED CARD BOARD SHEET EACH SET CONSIST OF A) PACKING SHEET I HEMRL/ED/DRG NO.. 001 DETL NO 1 SIZE 600X225X32.5MM THICK, 18 NOS ./SET B)PACKING SHEET II DETL NO.2 SIZE 590X 235X42.5MM THICK, 18 NOS. /SET C) PKG. SHEET III DETL NO. 3 SIZE 235X140X12 MM THICK 27 NOS. /SET

CORRUGATED CARD BOARD SHEET EACH SET CONSIST OF A) PACKING SHEET I HEMRL/ED/DRG NO.. 001 DETL NO 1 SIZE 600X225X32.5MM THICK, 18 NOS ./SET B)PACKING SHEET II DETL NO.2 SIZE 590X 235X42.5MM THICK, 18 NOS. /SET C) PKG. SHEET III DETL NO. 3 SIZE 235X140

COMPRESSION CANISTER LOAD CELL RANGE 1 TON (10 KN) AS PER ATTACHED SPECIFICATION.

COMPRESSION CANISTER LOAD CELL RANGE 1 TON (10 KN) AS PER ATTACHED SPECIFICATION.

CLOTH COTTON DOSUTI BL 36 INCHES WIDE AS PER SPECN.NO. IS:179-2009 (Reaffirmed 2018)

CLOTH COTTON DOSUTI BL 36 INCHES WIDE AS PER SPECN.NO. IS:179-2009 (Reaffirmed 2018)

• MSME

• CLOTH COTTON DOSUTI BL 36 INCHES WIDE AS PER SPECN.NO. IS:179-2009 (Reaffirmed 2018)

SCLOTH CHINA SHEETING NO.1 GREY 36 INCHES WIDE (91.5 CMS) AS PER B.F. SPECN. NO. 1.10 DTD. 28.08.82,AMENDED ONDTD. 11.11. 2013.(EXTRACT ATTACHED).

CLOTH CHINA SHEETING NO.1 GREY 36 INCHES WIDE (91.5 CMS) AS PER B.F. SPECN. NO. 1.10 DTD. 28.08.82,AMENDED ONDTD. 11.11. 2013.(EXTRACT ATTACHED).

• MSME

• CLOTH CHINA SHEETING NO.1 GREY 36 INCHES WIDE (91.5 CMS) AS PER B.F. SPECN. NO. 1.10 DTD. 28.08.82,AMENDED ONDTD. 11.11. 2013.(EXTRACT ATTACHED).

DRG.NO.-OFBA/BT/52 G/1, OFBA/BT/52 G/1/1, OFBA/BT/53G/1, OFBA/BT/53G/1/1 INNER BOX TO BE WAX COATED INSIDE AND OUTSIDE SURFACE. OUTER BOX TO BE WAX COATED INSIDE SURFACE ONLY.

DRG.NO.-OFBA/BT/52 G/1, OFBA/BT/52 G/1/1, OFBA/BT/53G/1, OFBA/BT/53G/1/1 INNER BOX TO BE WAX COATED INSIDE AND OUTSIDE SURFACE. OUTER BOX TO BE WAX COATED INSIDE SURFACE ONLY.

• MSME

• DRG.NO.-OFBA/BT/52 G/1, OFBA/BT/52 G/1/1, OFBA/BT/53G/1, OFBA/BT/53G/1/1 INNER BOX TO BE WAX COATED INSIDE AND OUTSIDE SURFACE. OUTER BOX TO BE WAX COATED INSIDE SURFACE ONLY.

CLOTH ACRYLIC RAYON GRADE "B" TO SPECN IND/ME/973(A)2016 DC 6009-ME DT.03.02.2017. WIDTH NOT LESS THAN 1 MTR.

CLOTH ACRYLIC RAYON GRADE "B" TO SPECN IND/ME/973(A)2016 DC 6009-ME DT.03.02.2017. WIDTH NOT LESS THAN 1 MTR.

• MSME

• CLOTH ACRYLIC RAYON GRADE "B" TO SPECN IND/ME/973(A)2016 DC 6009-ME DT.03.02.2017. WIDTH NOT LESS THAN 1 MTR.

CLOTH ACRYLIC RAYON WHITE TO SPECIFICATION IND/ME/973(A) 2016 GRADE A DC NO. 6009 ME DATED 03.02.2017. WIDTH NOT LESS THAN 1.22 METRE.

CLOTH ACRYLIC RAYON WHITE TO SPECIFICATION IND/ME/973(A) 2016 GRADE A DC NO. 6009 ME DATED 03.02.2017. WIDTH NOT LESS THAN 1.22 METRE.

• MSME

• CLOTH ACRYLIC RAYON WHITE TO SPECIFICATION IND/ME/973(A) 2016 GRADE A DC NO. 6009 ME DATED 03.02.2017. WIDTH NOT LESS THAN 1.22 METRE.

AS PER DRG NO. CI(A)635595 & CQA(A) 6391044

AS PER DRG NO. CI(A)635595 & CQA(A) 6391044

• MSME

• AS PER DRG NO. CI(A)635595 & CQA(A) 6391044

CASE C-128MK-13/L TO DRG.NO.IA-1031/OFBA/RK/514 DTD.31.12.07 DC NO.36234-A.DT-4.2.97 & SPECN- NO.IA-948 (A.F) DC NO.36081 -A (WITHOUT GROOVES AND PARTITIONS).

CASE C-128MK-13/L TO DRG.NO.IA-1031/OFBA/RK/514 DTD.31.12.07 DC NO.36234-A.DT-4.2.97 & SPECN- NO.IA-948 (A.F) DC NO.36081 -A (WITHOUT GROOVES AND PARTITIONS).

• MSME

• CASE C-128MK-13/L TO DRG.NO.IA-1031/OFBA/RK/514 DTD.31.12.07 DC NO.36234-A.DT-4.2.97 & SPECN- NO.IA-948 (A.F) DC NO.36081 -A (WITHOUT GROOVES AND PARTITIONS).

CARTRIDGING PAPER GR-2 MACHINE GLASED(ONE SIDE ONLY) IN ROLL,BOBBIN DIA OF 800 MM, BOBBIN CENTER SLEEVE DIA OF 70 MM AND ROLL WIDTH OF 170 MM AS PER SPECN IS:1397 : 1990,Second Revision (Amendment NO 1)REAFFIRMED 2002.

CARTRIDGING PAPER GR-2 MACHINE GLASED(ONE SIDE ONLY) IN ROLL,BOBBIN DIA OF 800 MM, BOBBIN CENTER SLEEVE DIA OF 70 MM AND ROLL WIDTH OF 170 MM AS PER SPECN IS:1397 : 1990,Second Revision (Amendment NO 1)REAFFIRMED 2002.

CARTON BOX FOR LTPE CARTRIDGE TO HOLD 25 CARTRIGES 100 G EACH,EMPTY LONG FLAPS AS PER DRG.NO. OFBA/PE/11,THICKNESS OF CARTON BOARD 0.889 MM PLUS/MINUS 0.089 MM.

CARTON BOX FOR LTPE CARTRIDGE TO HOLD 25 CARTRIGES 100 G EACH,EMPTY LONG FLAPS AS PER DRG.NO. OFBA/PE/11,THICKNESS OF CARTON BOARD 0.889 MM PLUS/MINUS 0.089 MM.

DRG.NO. OFBA/PE/11,THICKNESS OF CARTON BOARD 0.889 MM PLUS/MINUS 0.089 MM.

• MSME

• CARTON BOX FOR LTPE CARTRIDGE TO HOLD 25 CARTRIGES 100 G EACH,EMPTY LONG FLAPS AS PER DRG.NO. OFBA/PE/11,THICKNESS OF CARTON BOARD 0.889 MM PLUS/MINUS 0.089 MM.

CARTG SA 5 POINT 56 MM BALL

CARTG. SA 5.56 MM BALL MK-I TO CQA (A) DRG NO. IQV 45 GF

CARTG. SA 5.56 MM BALL MK-I TO CQA (A) DRG NO. IQV 45 GF

RING TO DRG NO 6101512

RING TO DRG NO 6101512

DRG NO 6101512

• ANNEXURE L

• part b

CARBON BLACK (MONARCH-1300) SPECIFICATION JSS 6810-81-2010 (REV.NO.3)

CARBON BLACK (MONARCH-1300) SPECIFICATION JSS 6810-81-2010 (REV.NO.3)

• MSME

• CARBON BLACK (MONARCH-1300) SPECIFICATION JSS 6810-81-2010 (REV.NO.3)

CARBON BLACK TYPE II (PRINTEX 300) SPECN. NO. JSS 6810-081 : 2016, REV.NO.3.

CARBON BLACK TYPE II (PRINTEX 300) SPECN. NO. JSS 6810-081 : 2016, REV.NO.3.

• MSME

• CARBON BLACK TYPE II (PRINTEX 300) SPECN. NO. JSS 6810-081 : 2016, REV.NO.3.

ACTIVATED CARBON POWDERED TYPE-3 CONFORMING TO IS SPECN.NO IS 8366-1989.Reaffirmed 2016(FIRST REVISION ).

ACTIVATED CARBON POWDERED TYPE-3 CONFORMING TO IS SPECN.NO IS 8366-1989.Reaffirmed 2016(FIRST REVISION ).

• MSME

• ACTIVATED CARBON POWDERED TYPE-3 CONFORMING TO IS SPECN.NO IS 8366-1989.Reaffirmed 2016(FIRST REVISION ).

SPCN: JSS-6810-125-2014, REVISION NO 3.

SPCN: JSS-6810-125-2014, REVISION NO 3.

• MSME

• SPCN: JSS-6810-125-2014, REVISION NO 3.

CANDELILLA WAX AS PER SPECN.JSS-NO.9160-08:2016 (REV NO.2).

CANDELILLA WAX AS PER SPECN.JSS-NO.9160-08:2016 (REV NO.2). )

• MSME

• CANDELILLA WAX AS PER SPECN.JSS-NO.9160-08:2016 (REV NO.2). )

IND/ ME/ 458 DC - 3754 ME Dtd. 12/12/ 2002

IND/ ME/ 458 DC - 3754 ME Dtd. 12/12/ 2002

• MSME

• IND/ ME/ 458 DC - 3754 ME Dtd. 12/12/ 2002

CALCIUM CARBONATE FOR PROPELLANT AS PER IS: 7633-1982 REAFFIRMED 2016 GADE-2 CHALK CALCITE.TO SPECN.: PACAL-'F'VARIETY.PARAMETERS OF PACAL SPECN.TO BE TESTED AS PER SPECIFIED METHOD.

CALCIUM CARBONATE FOR PROPELLANT AS PER IS: 7633-1982 REAFFIRMED 2016 GADE-2 CHALK CALCITE.TO SPECN.: PACAL-'F'VARIETY.PARAMETERS OF PACAL SPECN.TO BE TESTED AS PER SPECIFIED METHOD.

• MSME

• CALCIUM CARBONATE FOR PROPELLANT AS PER IS: 7633-1982 REAFFIRMED 2016 GADE-2 CHALK CALCITE.TO SPECN.: PACAL-'F'VARIETY.PARAMETERS OF PACAL SPECN.TO BE TESTED AS PER SPECIFIED METHOD.

BOX PETN/RDX 1A -L WOOD FOR PACKING PETN/RDX AS PER DRAWING NO.IND/ME/59 DC NO.3604-ME DT.13-12-99.

BOX PETN/RDX 1A -L WOOD FOR PACKING PETN/RDX AS PER DRAWING NO.IND/ME/59 DC NO.3604-ME DT.13-12-99.

DRG. NO. IND/ME/59 DC NO. 3604-ME DTD. 13/12/1999

• MSME

• BOX PETN/RDX 1A -L WOOD FOR PACKING PETN/RDX AS PER DRAWING NO.IND/ME/59 DC NO.3604-ME DT.13-12-99.

BOX G 70 STEEL

AMMUNITION CONTAINER BOX, BOX G-70 MK-I/LA DRG . PT. NO. S.V. 68-A, DC 37270 -A, SPEC NO. IA 1169(N) DC 35576-A AIDE MEMOIRE P/11 NOTE- RUST PROOFING & PAINTING AS PER DRG. WITH OLIVE GREEN COLOUR ISC-220 OF IS-5-1994 WITH AMENDMENT.

DRG . PT. NO. S.V. 68-A, DC 37270 -A, SPEC NO. IA 1169(N) DC 35576-A AIDE MEMOIRE P/11 NOTE- RUST PROOFING & PAINTING AS PER DRG. WITH OLIVE GREEN COLOUR ISC-220 OF IS-5-1994 WITH AMENDMENT.

BOX CARTRIDGE LTPE WOOD FOR PACKING 10 KGS CARTRIDGES LTPE 100 GMS(IN CARTONS) AS PER DRG. NO. OFBA/PE/12.DT-08/05/2001 AMENDED ON DT.23.07.2002.

BOX CARTRIDGE LTPE WOOD FOR PACKING 10 KGS CARTRIDGES LTPE 100 GMS(IN CARTONS) AS PER DRG. NO. OFBA/PE/12.DT-08/05/2001 AMENDED ON DT.23.07.2002.

DRG. NO. OFBA/PE/12.DT-08/05/2001 AMENDED ON DT.23.07.2002.

• MSME

• BOX CARTRIDGE LTPE WOOD FOR PACKING 10 KGS CARTRIDGES LTPE 100 GMS(IN CARTONS) AS PER DRG. NO. OFBA/PE/12.DT-08/05/2001 AMENDED ON DT.23.07.2002.

BOX C 18A STEEL

SPEC. AMMUNITION CONTAINER BOX, C-18 A/L/(STEEL), FOR AMMUNITION CONT. ASSY .28, TO DRG NO. ISV 282-A, DC- 35479-A

SPEC. AMMUNITION CONTAINER BOX, C-18 A/L/(STEEL), FOR AMMUNITION CONT. ASSY .28, TO DRG NO. ISV 282-A, DC- 35479-A

WOOD FOR PACKAGE AMMUNITION, 92 A PART NO. ISV-352A, DRG-CIA/AMMN 1773 DC-35922-A DTD. 23.02.95 & SPECN., IA-948 (a,f) DC-36081 A

WOOD FOR PACKAGE AMMUNITION, 92 A PART NO. ISV-352A, DRG-CIA/AMMN 1773 DC-35922-A DTD. 23.02.95 & SPECN., IA-948 (a,f) DC-36081 A

DRG-CIA/AMMN 1773 DC-35922-A DTD. 23.02.95 & SPECN., IA-948 (a,f) DC-36081 A

• MSME

• BOX C-26A, WOOD FOR PACKAGE AMMUNITION, 92A PART NO. ISV-352A DRG-CIA/AMMN/1773 DC-35922-A DTD.23.02.95 & SPECIFICATION IA-948 (a,f) DC - 36081 A.

BOLT OF SIZE M 16 X 2P X 50 MM

TOP ERA BOX TO SPEC. NO. HEMRL/MED/PS/292 & HEMRL DRG. NO. 1459/1 & THE PART OF DRAWING AS GIVEN BELOW:- TOP BOX CONTAINER WITH CLAMP & COLLAR TO DRG. NO. 1459/2, TOP BOX CONTAINER TO DRG. NO. 1459/3, COLLAR TO DRG. NO. 1459/4. LID (TOP) TO DRG. NO. 5

TOP ERA BOX TO SPEC. NO. HEMRL/MED/PS/292 & HEMRL DRG. NO. 1459/1 & THE PART OF DRAWING AS GIVEN BELOW:- TOP BOX CONTAINER WITH CLAMP & COLLAR TO DRG. NO. 1459/2, TOP BOX CONTAINER TO DRG. NO. 1459/3, COLLAR TO DRG. NO. 1459/4. LID (TOP) TO DRG. NO.

BLEACHED COTTON LINTERS SHALL CONFORM TO SPECIFICATION JSS: 8305-14 : 2020 (REVISION NO.5) INCLUDING CLAUSE 7.4.2. THE DYNAMIC VISCOSITY OF THE STORE SHOULD BE BETWEEN 10 TO 30 POISE FOR O.F.BHANDARA AGAINST THE DYNAMIC VISCOSITY RANGE 5 TO 50 POISE.

BLEACHED COTTON LINTERS SHALL CONFORM TO SPECIFICATION JSS: 8305-14 : 2020 (REVISION NO.5) INCLUDING CLAUSE 7.4.2. THE DYNAMIC VISCOSITY OF THE STORE SHOULD BE BETWEEN 10 TO 30 POISE FOR O.F.BHANDARA AGAINST THE DYNAMIC VISCOSITY RANGE 5 TO 50 POISE.

• MSME

• BLEACHED COTTON LINTERS SHALL CONFORM TO SPECIFICATION JSS: 8305-14 : 2020 (REVISION NO.5) INCLUDING CLAUSE 7.4.2. THE DYNAMIC VISCOSITY OF THE STORE SHOULD BE BETWEEN 10 TO 30 POISE FOR O.F.BHANDARA AGAINST THE DYNAMIC VISCOSITY RANGE 5 TO 50 POISE.

BLANKET COTTON DOSUTI WHITE STITCHED AROUND OF SIZE- 1.5 X 0.8 METER. AS PER SPECIFICATION NO- IS:179-2009 (THIRD REVISION) REAFIRMED-2018.

BLANKET COTTON DOSUTI WHITE STITCHED AROUND OF SIZE- 1.5 X 0.8 METER. AS PER SPECIFICATION NO- IS:179-2009 (THIRD REVISION) REAFIRMED-2018.

• MSME

• BLANKET COTTON DOSUTI WHITE STITCHED AROUND OF SIZE- 1.5 X 0.8 METER. AS PER SPECIFICATION NO- IS:179-2009 (THIRD REVISION) REAFIRMED-2018.

BELLOID T.D. is a Sodium Salt of Condensation Product of Nophthalene Sulphonic acid with Formaldehyde and also called Anionic dispersing agent.

BELLOID T.D. is a Sodium Salt of Condensation Product of Nophthalene Sulphonic acid with Formaldehyde and also called Anionic dispersing agent.

JSS 6810 -145:2017( Revision No 2)

JSS 6810 -145:2017( Revision No 2)

• MSME

• JSS 6810 -145:2017( Revision No 2)

ERDL/DBP/PS 133(a)Sheet No.19 of Sept.1986

ERDL/DBP/PS 133(a)Sheet No.19 of Sept.1986

BARRELS 200 LITRES CAPACITY WITH LID (EMPTY DRUMS M.S ) DRG NO, OFBA/NC/189 ATTACHED

BARRELS 200 LITRES CAPACITY WITH LID (EMPTY DRUMS M.S ) DRG NO, OFBA/NC/189 ATTACHED

DRG NO, OFBA/NC/189

• MSME

• BARRELS 200 LITRES CAPACITY WITH LID (EMPTY DRUMS M.S ) DRG NO, OFBA/NC/189 ATTACHED

BAG MADE OF REEL CLOTH AS PER DRG NO.OFBA/NCP/EXPN/17

BAG MADE OF REEL CLOTH AS PER DRG NO.OFBA/NCP/EXPN/17

DRG NO.OFBA/NCP/EXPN/17

• MSME

• BAG MADE OF REEL CLOTH AS PER DRG NO.OFBA/NCP/EXPN/17

GREEN COLOUR/WHITE COLOUR AS PER DRG NO. OFBA/NCP/EXPN/16 DT. 07.6.67

GREEN COLOUR/WHITE COLOUR AS PER DRG NO. OFBA/NCP/EXPN/16 DT. 07.6.67

DRG NO. OFBA/NCP/EXPN/16 DT. 07.6.67

• MSME

• MSME

BAG COTTON CALICO(bleached)FOR NCP 50KG CAPACITY TO DRG.NO. OFBA/NR/251/2, MATERIAL OF CLOTH CALICO BLEACHED CONFORMING TO VARIETY NO.3 OF IS:5088-1982 REAFFIRMED 2017

BAG COTTON CALICO(bleached)FOR NCP 50KG CAPACITY TO DRG.NO. OFBA/NR/251/2, MATERIAL OF CLOTH CALICO BLEACHED CONFORMING TO VARIETY NO.3 OF IS:5088-1982 REAFFIRMED 2017

• MSME

• BAG COTTON CALICO(bleached)FOR NCP 50KG CAPACITY TO DRG.NO. OFBA/NR/251/2, MATERIAL OF CLOTH CALICO BLEACHED CONFORMING TO VARIETY NO.3 OF IS:5088-1982 REAFFIRMED 2017

BAG CAMBRIC 15 KG CAP. AS PER DRG.NO.NEFB/NCP/26 DT 01.07.64 MADE OF CLOTH.CAMBRIC WHITE - VARIETY NO.2 OF IS : 5088-1982 REAFFIRMED1996 AMND1&2(COTTON TEXTILE FOR AMMN)THREAD COTTON WHITE SEWING 16 x 6 UNPROOFED DYED TO JSS-8310-02-1994 DC. NO.3277 DT 21.2 95(REV I) TO BE USED FOR STITCH OF BAG.

BAG CAMBRIC 15 KG CAP. AS PER DRG.NO.NEFB/NCP/26 DT 01.07.64 MADE OF CLOTH.CAMBRIC WHITE - VARIETY NO.2 OF IS : 5088-1982 REAFFIRMED1996 AMND1&2(COTTON TEXTILE FOR AMMN)THREAD COTTON WHITE SEWING 16 x 6 UNPROOFED DYED TO JSS-8310-02-1994 DC. NO.3277 DT 21.2 95(REV I) TO BE USED FOR STITCH OF BAG.

• MSME

• BAG CAMBRIC 15 KG CAP. AS PER DRG.NO.NEFB/NCP/26 DT 01.07.64 MADE OF CLOTH.CAMBRIC WHITE - VARIETY NO.2 OF IS : 5088-1982 REAFFIRMED1996 AMND1&2(COTTON TEXTILE FOR AMMN)THREAD COTTON WHITE SEWING 16 x 6 UNPROOFED DYED TO JSS-8310-02-1994 DC. NO.3277 DT 21.2 95(REV I) TO BE USED FOR STITCH OF BAG.

BAG POLYTHENE FOR HEXAMINE TO DRG. NO. OFBA/HEX/30 DATED- 16-11-75,AMMENDED ON DT 24.02.10,0.127 MM -0.005 MM THICK/ 500 GAUGE. - 5 GAUGE.

BAG POLYTHENE FOR HEXAMINE TO DRG. NO. OFBA/HEX/30 DATED- 16-11-75,AMMENDED ON DT 24.02.10,0.127 MM -0.005 MM THICK/ 500 GAUGE. - 5 GAUGE.

Drg No. OFBA/HEX/30,DTD. 16.01.75 AMENDED ON 24.02.2010

• MSME

• BAG POLYTHENE FOR HEXAMINE TO DRG. NO. OFBA/HEX/30 DATED- 16-11-75,AMMENDED ON DT 24.02.10,0.127 MM -0.005 MM THICK/ 500 GAUGE. - 5 GAUGE.

BAG POLYTHENE FOR PACKING NC- QUALITY OF MATERIAL TO CONFORM TO LOW DENSITY POLYETHYLENE TYPE-1 SPECIFICATION JSS- 9330 - 03-2014,REV.NO.3.THICKNESS 0.18 PLUS MINUS 0.02MM.DIMENSION AND HEAT SEALING AS PER DRG.NO.OFBA/NC/46 AMENDED ON 27.03. 2010.

BAG POLYTHENE FOR PACKING NC- QUALITY OF MATERIAL TO CONFORM TO LOW DENSITY POLYETHYLENE TYPE-1 SPECIFICATION JSS- 9330 - 03-2014,REV.NO.3.THICKNESS 0.18 PLUS MINUS 0.02MM.DIMENSION AND HEAT SEALING AS PER DRG.NO.OFBA/NC/46 AMENDED ON 27.03. 2010.

DRG. NO.OFBA/NC/46 AMENDED ON 27/03/2010.

• MSE

• MSE

DRG. NO. OFBA/RX/243 AMMENDED ON 07/11/02

DRG. NO. OFBA/RX/243 AMMENDED ON 07/11/02

DRG. NO. OFBA/RX/243 AMMENDED ON 07/11/02

• MSME

• BAG COTTON TNT 25 KG TO DRG. NO. OFBA/RX/243 AMMENDED ON 7.11.02.

ASSY ERA CONTAINER TOP BOX

TOP ERA BOX TO SPEC. NO. HEMRL/MED/PS/292 & HEMRL DRG. NO. 1459/1 & THE PART OF DRAWING AS GIVEN BELOW:- TOP BOX CONTAINER WITH CLAMP & COLLAR TO DRG. NO. 1459/2, TOP BOX CONTAINER TO DRG. NO. 1459/3, COLLAR TO DRG. NO. 1459/4. LID (TOP) TO DRG. NO. 5

DRG. NO. 1459/1 & THE PART OF DRAWING AS GIVEN BELOW:- TOP BOX CONTAINER WITH CLAMP & COLLAR TO DRG. NO. 1459/2, TOP BOX CONTAINER TO DRG. NO. 1459/3, COLLAR TO DRG. NO. 1459/4. LID (TOP) TO DRG. NO. 5

• MSME

• TOP ERA BOX TO SPEC. NO. HEMRL/MED/PS/292 & HEMRL DRG. NO. 1459/1 & THE PART OF DRAWING AS GIVEN BELOW:- TOP BOX CONTAINER WITH CLAMP & COLLAR TO DRG. NO. 1459/2, TOP BOX CONTAINER TO DRG. NO. 1459/3, COLLAR TO DRG. NO. 1459/4. LID (TOP) TO DRG. NO. 5

ASSY ERA CONTAINER STD BOX

STANDARD ERA BOX TO SPEC. NO. HERML/MED/PS/290 & HEM RL DRG. NO. 1457/1 & THE PART OF DRAWING AS GIVEN BELOW :- STANDARD BOX CONTAINER WITH CLAMP & COLLAR TO DRG NO. 1457/2 STANDARD BOX CONTAINER TO DRG . NO. 1457/3, COLLAR TO DRG. NO 1457/4, CLAMP TO DRG NO. 1457/5 , LID (STANDARD) TO DRG NO. 1457/6

RL DRG. NO. 1457/1 & THE PART OF DRAWING AS GIVEN BELOW :- STANDARD BOX CONTAINER WITH CLAMP & COLLAR TO DRG NO. 1457/2 STANDARD BOX CONTAINER TO DRG . NO. 1457/3, COLLAR TO DRG. NO 1457/4, CLAMP TO DRG NO. 1457/5 , LID (STANDARD) TO DRG NO. 1457/6

• MSME

• RL DRG. NO. 1457/1 & THE PART OF DRAWING AS GIVEN BELOW :- STANDARD BOX CONTAINER WITH CLAMP & COLLAR TO DRG NO. 1457/2 STANDARD BOX CONTAINER TO DRG . NO. 1457/3, COLLAR TO DRG. NO 1457/4, CLAMP TO DRG NO. 1457/5 , LID (STANDARD) TO DRG NO. 1457/6

AMMONIA ANHYDROUS GRADE-2 TO SPECIFICATION IS/662/1980. REAFFIRMED 2003WITH AMENDMENT 1,2,3&4 WITH THE FOLLOWING REQUIREMENTS 1)PURITY 99.5% MIN(2) OIL CONTENT- 0.002% MAXM. AND OTHER PARAMETERS TO CONFIRM TO IS -662-1980 GR-2 (FIRST REVISION) REAFFIRMED-2003 WITH AMENDMENT 1,2,3&4.

AMMONIA ANHYDROUS GRADE-2 TO SPECIFICATION IS/662/1980. REAFFIRMED 2003WITH AMENDMENT 1,2,3&4 WITH THE FOLLOWING REQUIREMENTS 1)PURITY 99.5% MIN(2) OIL CONTENT- 0.002% MAXM. AND OTHER PARAMETERS TO CONFIRM TO IS -662-1980 GR-2 (FIRST REVISION) REAFFIRMED-2003 WITH AMENDMENT 1,2,3&4.

• MSME

• Specn No-IS:662/1980

ALUMINIUM STEARATE TO SPCN:IND/ME-970 :2016. DC-5462-ME-01.6. 2016. (a) Retention on 150 micrometer IS sieve max.5.0%. (b) Retention on 75 micrometer IS sieve max.15%.

ALUMINIUM STEARATE TO SPCN:IND/ME-970 :2016. DC-5462-ME-01.6. 2016. (a) Retention on 150 micrometer IS sieve max.5.0%. (b) Retention on 75 micrometer IS sieve max.15%..

• MSME

• ALUMINIUM STEARATE TO SPCN:IND/ME-970 :2016. DC-5462-ME-01.6. 2016. (a) Retention on 150 micrometer IS sieve max.5.0%. (b) Retention on 75 micrometer IS sieve max.15%.

ALUMINIUM POWDER HEAVY GRADE-I CONFORMING TO SPECIFICATION JSS-1370-03-2014 REVISION NO -3 DC 5297-ME DATED 16.12.2014 HEAVY GRADE SIZE 125 MICROMETER.

ALUMINIUM POWDER HEAVY GRADE-I CONFORMING TO SPECIFICATION JSS-1370-03-2014 REVISION NO -3 DC 5297-ME DATED 16.12.2014 HEAVY GRADE SIZE 125 MICROMETER.

• MSME

• ALUMINIUM POWDER HEAVY GRADE-I CONFORMING TO SPECIFICATION JSS-1370-03-2014 REVISION NO -3 DC 5297-ME DATED 16.12.2014 HEAVY GRADE SIZE 125 MICROMETER.

Drg.No.OFBA/PETN/23 Dtd.15.01.1970

ALUMINIUM CONTAINER AS PER DRG.NO.OFBA/RX/391 Dt 24.10.2020.

ALUMINIUM CONTAINER AS PER DRG.NO.OFBA/RX/391 Dt 24.10.2020.

• MSME

• ALUMINIUM CONTAINER AS PER DRG.NO.OFBA/RX/391 Dt 24.10.2020.

ALKATHENE POLYMER WRM-19 TYPE XD POLYTHENE MOULDING AND EXT RUSION MATERIAL(FOR AMMN. APPLICATION) CONFORMING TO SPECN. DEF/STAN 13-9/1.

ALKATHENE POLYMER WRM-19 TYPE XD POLYTHENE MOULDING AND EXT RUSION MATERIAL(FOR AMMN. APPLICATION) CONFORMING TO SPECN. DEF/STAN 13-9/1.

• MSME

• ALKATHENE POLYMER WRM-19 TYPE XD POLYTHENE MOULDING AND EXT RUSION MATERIAL(FOR AMMN. APPLICATION) CONFORMING TO SPECN. DEF/STAN 13-9/1.

Specn IS/170-2004Fourt revi with purity percent by mass mini 99%

Specn IS/170-2004Fourt revi with purity percent by mass mini 99%

• MSME

• Specn No. IS / 170-2004 (Latest Revision )

Specn No-IS-695-2020 Fourth Revision

Specn No-IS-695-2020 Fourth Revision

• MSME

• Specn No-IS-695-2020 Forth Rev Reaffirmed 1DC-3805-ME-05.05.04

30 MM BMP II APT

30 MM BMP II APT

FORGINGS OF 8 TYPES DIFFERENT ITEMS HAVING WEIGHT OF EACH ITEM 51 TO 120 KG (ANNUAL REQUIREMENT 50 TO 75 NOS.)

FORGINGS OF 8 TYPES DIFFERENT ITEMS HAVING WEIGHT OF EACH ITEM 51 TO 120 KG

FORGINGS OF 9 TYPES DIFFERENT ITEMS HAVING WEIGHT OF EACH ITEM 21 TO 50 KG (ANNUAL REQUIREMENT 50 TO 75 NOS.)

FORGINGS OF 9 TYPES DIFFERENT ITEMS HAVING WEIGHT OF EACH ITEM 21 TO 50 KG

FORGINGS OF 7 TYPES DIFFERENT ITEMS HAVING WEIGHT OF EACH ITEM 11 TO 20 KG (ANNUAL REQUIREMENT 50 TO 75 NOS.)

FORGINGS OF 7 TYPES DIFFERENT ITEMS HAVING WEIGHT OF EACH ITEM 11 TO 20 KG

FORGINGS OF 12 TYPES DIFFERENT ITEMS HAVING WEIGHT OF EACH ITEM 6 TO 10 KG (ANNUAL REQUIREMENT 50 TO 75 NOS.)

FORGINGS OF 12 TYPES DIFFERENT ITEMS HAVING WEIGHT OF EACH ITEM 6 TO 10 KG

FORGINGS OF 68 TYPES DIFFERENT ITEMS HAVING WEIGHT OF EACH ITEM 0 TO 5 KG (ANNUAL REQUIREMENT 50 TO 75 NOS.)

FORGINGS OF 68 TYPES DIFFERENT ITEMS HAVING WEIGHT OF EACH ITEM 0 TO 5 KG

AMMUNITION RACK SAFTY BELT TO DRG NO 3016775

AMMUNITION RACK SAFTY BELT TO DRG NO 3016775

DRG NO 3016775

HAND SPIKE ASSY TO DRG NO M2/BOF-4023835

HAND SPIKE ASSY TO DRG NO M2/BOF-4023835

M2/BOF-4023835

SEATING SPRING TO PART NO.6118954

SEATING SPRING TO PART NO.6118954

NO.6118954

PIN AXIS DEPRESSION LEVER TO PART NO BOF-6097384

PIN AXIS DEPRESSION LEVER TO PART NO BOF-6097384

BOF-6097384

COVER TO PART NO 5049421-2

COVER TO PART NO 5049421-2

5049421-2

KNOB DRG NO 6108161

KNOB DRG NO 6108161

DRG NO 6108161

PLASTIC FILM SLEEVE FOR M-92

AS PER ATTACHED FILE

OFN/BMCS/M-92/PLASTIC FILM SLEEVE