TORSION BAR(RHD) 2641 8910 7903(V-2)

TORSION BAR(RHD) 2641 8910 7903(V-2)

Part No.264189107903

ASSY.TOWING HOOK FT. PT.NO.0125200096J-N-B5200401

ASSY.TOWING HOOK FT. PT.NO.0125200096J-N-B5200401

Part No.0125200096J

ASSY FUEL TANK COMPLETE 2154 4750 0102-V2 WITH ASSY DIP STICK PTNO.261447100211 FLOAT VALVE DRG.0005420.204J (215447500101(V-2) ASSY.AIR BREATHER PTNO 2574 2815 9901 & SUCTION TUBE WITH FUEL TANK(275147100106)

ASSY FUEL TANK COMPLETE 2154 4750 0102-V2 WITH ASSY DIP STICK PTNO.261447100211 FLOAT VALVE DRG.0005420.204J (215447500101(V-2) ASSY.AIR BREATHER PTNO 2574 2815 9901 & SUCTION TUBE WITH FUEL TANK(275147100106)

Part No. 215447500102

Assy Fuel Heater BS-III

Assy Fuel Heater BS-III

2198 4770 4901/ 8710281 F/Guard

Assy 352 Dia Driven Disc &cover LPTA Part No. 275225000105

Assy 352 Dia Driven Disc &cover LPTA Part No. 275225000105

2752 2500 0105

• As per drawing

• As per drawing

Set. Assy Aux. Tank &Clamp LP - RHD

Set. Assy Aux. Tank &Clamp LP - RHD

2527 5010 0228

Kit Assy Air Tank consisting of 08 items (Voss).BS-III.

Kit Assy Air Tank consisting of 08 items (Voss).BS-III.

2198 4320 0101

Assy Tie-Member

Assy Tie-Member

2154 8910 0104d

Assy Radiator with inter cooler complete

Assy Radiator with inter cooler complete

2069 5010 0203 VI

Assy Cross Tube(Torsion Bar)RHD

Assy Cross Tube(Torsion Bar)RHD

2064 8910 0118

ASSY FRONT FOG LAMP 24V YELLOW COLOUR, LPTA715 BS-III. PART NO.283954440113(DRG NO 28085440402) PART NO. 2839 5444 0117 (DRG NO. 28085440 0404)

ASSY FRONT FOG LAMP 24V YELLOW COLOUR, LPTA715 BS-III. PART NO.283954440113(DRG NO 28085440402) PART NO. 2839 5444 0117 (DRG NO. 28085440 0404)

Part No. 283954440113

BATTERY SMF 12V,180AH FULLY CHARGED.AMARARAJA, PART NO.264354109903-V1 ALTERNATE TAFE BATTERY PART NO.2643-5410-9903- TAFE(Ref Drg No. TAFEPSD-12V180Ah(VFJ-01)) FOR LPTA 715 BS-III VEHICLES

BATTERY SMF 12V,180AH FULLY CHARGED.AMARARAJA, PART NO.264354109903-V1 ALTERNATE TAFE BATTERY PART NO.2643-5410-9903- TAFE(Ref Drg No. TAFEPSD-12V180Ah(VFJ-01)) FOR LPTA 715 BS-III VEHICLES

Part No.264354109903-V1

• As per Specification

• As per Specification

HORN 24 V, LPTA715, BS-III VEHICLE. (Ref : Telco drg.No. 2078 5420 0402)

HORN 24 V, LPTA715, BS-III VEHICLE. (Ref : Telco drg.No. 2078 5420 0402)

Part No. 257354249910

ASSY TAIL LAMP RH & LH 24V (05 CHAMBER) ALONGWITH LAMP. LPTA715 BS-III.PART NO. 280954441602 & 280954441603 REF.DRG. 2641 5440 0447)

ASSY TAIL LAMP RH & LH 24V (05 CHAMBER) ALONGWITH LAMP. LPTA715 BS-III.PART NO. 280954441602 & 280954441603 REF.DRG. 2641 5440 0447)

Part No. 280954441602

ASSY CABLE SET WITH 12 POLE SOCKET BS-III VEHICLE (LPTA) PART NO.261454820103a.

ASSY CABLE SET WITH 12 POLE SOCKET BS-III VEHICLE (LPTA) PART NO.261454820103a.

Part No. 261454820103

A SET OF CLEAR LENS ASSY. HEAD LAMP MOTORISED 24V RH AND LH ALONGWITH BULB PART NO.280954440118(RH)MOD- D & 280954440117MOD-D (DRG. NO. 2641 5440 0438)

A SET OF CLEAR LENS ASSY. HEAD LAMP MOTORISED 24V RH AND LH ALONGWITH BULB PART NO.280954440118(RH)MOD- D & 280954440117MOD-D (DRG. NO. 2641 5440 0438)

Drg No. 2641 5440 0438

STARTER PUSH BUTTON 2101 5450 9906

STARTER PUSH BUTTON 2101 5450 9906

Part No. 210154509906

ASSY CAB LAMP (WITH BULB-24V) BS-III VEHICLE PART NO.

ASSY CAB LAMP (WITH BULB-24V) BS-III VEHICLE PART NO.

Part No. 207854400107

BLACKOUT LAMP FRONT, TML PT.NO.0005440814/215454409902/257454409915, FITTED WITH 24V, 21WATT BLUB,TML PT.NO.62120520046

BLACKOUT LAMP FRONT, TML PT.NO.0005440814/215454409902/257454409915, FITTED WITH 24V, 21WATT BLUB,TML PT.NO.62120520046

Part No.215454409902

ASSY TAIL LAMP BKT. DRG NO.261454400108 COSTING OF PT.NO/DRG NO.261454400110,ASSY GRILL GUARD TO DRG.NO.222654400101(b) MOUNTING BKT TO DRG NO.2226542008201a TWONOS EACH) BKT TO DRG. NO.261454408209, BKT.261454408208, CHANNEL 261454408206,STIFFNER TO PT.NO.261454408207.

ASSY TAIL LAMP BKT. DRG NO.261454400108 COSTING OF PT.NO/DRG NO.261454400110,ASSY GRILL GUARD TO DRG.NO.222654400101(b) MOUNTING BKT TO DRG NO.2226542008201a TWONOS EACH) BKT TO DRG. NO.261454408209, BKT.261454408208, CHANNEL 261454408206,STIFFNER TO PT.NO.261454408207.

Part No. 261454400108N

BATTERY CUT OUT SWITCH TML, PT.NO.257354509931. e

BATTERY CUT OUT SWITCH TML, PT.NO.257354509931. e

Part.No.257354509931

BLACK OUT LAMP REAR, TML PT NO.215454409905/257454409912, FITTED WITH 24V, 2 WATT BULB TML PT.NO.62120510067/216054000105.

BLACK OUT LAMP REAR, TML PT NO.215454409905/257454409912, FITTED WITH 24V, 2 WATT BULB TML PT.NO.62120510067/216054000105.

Part No. 215454409906

CONVOY LAMP ALONGWITH LAMP 24V, 2 WATS,LPTA715 BS-III.

CONVOY LAMP ALONGWITH LAMP 24V, 2 WATS,LPTA715 BS-III.

Part No. 0005440203J

FABRICATION OF JACKET & TROUSERS COMBAT PC DISRUPTIVE WITH INDIAN ARMY LOGO 220 GSM.

FABRICATION OF JACKET & TROUSERS COMBAT PC DISRUPTIVE WITH INDIAN ARMY LOGO 220 GSM. SWO PART II No. 60247. SPECIFICATION: OCFAv/Garment/001(c) for JCD OCFAv/Garment/002(c) for TCD MAKE & SHAPE: AS PER APPROVED SAMPLE. NOTE: A) CUT COMPONENTS AND GARNITURES WILL BE SUPPLIED BY THE FACTORY. B) DRAWING & SAMPLE WILL BE PROVIDED AT THE TIME OF FABRICATION.

HINGE DRG. NO. 765-50-2448/A

HINGE DRG. NO. 765-50-2448/A

765-50-2448/A

FUEL TANK WITHOUT TOOL BOX TO FACILITATE MTG OF AMMUNITION BOX FOR UPGRADED MPV 4X4 L F 9010193097000

FUEL TANK WITHOUT TOOL BOX TO FACILITATE MTG OF AMMUNITION BOX FOR UPGRADED MPV 4X4 L F 9010193097000 DRG No. 2642-57-11

2642-57-11

SNAP HOOK QUICK EJECTOR

ADRDE/1210(c)

ADRDE/1210(c)

• ADRDE/1210(c)

• ADRDE/1210(c)

SPECN-AS PER PARTICULARS. WIDTH : 26.5+-0.5 MM, THICKNESS :0.42MM(MAX) WEIGHT/METER :5.2 GM(MAX) BREAKING STRENGTH :150 KG(MIN) HEAT SETTING :PROPER HEAT SETTING IS REQUIRED WEAVE :2X2 BROKEN TWILL(2 ENDS WORKING AS ONE) TOTAL NO.OF ENDS :228 PICKS/CM :24 DENIER OF YARN :(a)ENDS:153,(b)PICKS :150 T.P.M.(RANGE) :(a)WARP:140-215,,(b)WEFT :165-215 EXTENSION AT BREAK :20-30%

SPECN-AS PER PARTICULARS. WIDTH : 26.5+-0.5 MM, THICKNESS :0.42MM(MAX) WEIGHT/METER :5.2 GM(MAX) BREAKING STRENGTH :150 KG(MIN) HEAT SETTING :PROPER HEAT SETTING IS REQUIRED WEAVE :2X2 BROKEN TWILL(2 ENDS WORKING AS ONE) TOTAL NO.OF ENDS :228 PICKS/CM :24 DENIER OF YARN :(a)ENDS:153,(b)PICKS :150 T.P.M.(RANGE) :(a)WARP:140-215,,(b)WEFT :165-215 EXTENSION AT BREAK :20-30%

FABRIC NYLON 136 GRAM UNDYED WIDTH 110 + - 1 CMS.

SPECIFICATION NO. : ADRDE/SPECN/1982/7(c) sampling Sampling Plan & criteria for conformity as per ADRDE/SPECN/I.P.S.

SWITCH ASSY AND AXLE WITH LEVER DRG NO GCF TM 47 B SHEET 1 AND 2

SWITCH ASSY AND AXLE WITH LEVER DRG NO GCF TM 47 B SHEET 1 AND 2

Change over switch Assembly to drg. no. 2A26 cb 10 49 cb. (With Details)

Change over switch Assembly to drg. no. 2A26 cb 10 49 cb. (With Details)

• Change over switch Assembly to drg. no. 2A26 cb 10 49 cb. (With Details)

• Change over switch Assembly to drg. no. 2A26 cb 10 49 cb. (With Details)

FEMALE PORTION OF CWL

Female Portion of Canopy Withdrawl Line (CWL) for Kiran A/C/Jaguar A/C

Specn No. ADRDE/1343(e).

• As per specification/drawing

• As per specification/drawing

SHACKLE WITH NUT AND BOLT GREY 62248

DRG. NO. ADRDE/ PAS/2008/25

DRG. NO. ADRDE/ PAS/2008/25

SHACKLE WITH NUT AND BOLT (BLACK)

DRG. NO. ADRDE/ 1348-G (b)

DRG. NO. ADRDE/ 1348-G (b)

DRG. NO-ADRDE/1380.

DRG. NO-ADRDE/1380.

DRG. NO-ADRDE/1380.

SPECN.NO:-ADRDE/QMS/TDTM/SPECN/84.

SPECN.NO:-ADRDE/QMS/TDTM/SPECN/84.

SUPPLY OF EPD FUZE PCBS PCB I PCB II ASSEMBLED WITH ALL ELECTRONIC COMPONENTS AS PER BILL OF MATERIAL AND GERBER FILES ENCLOSED AS ANNEXURE A AND ANNEXURE B RESPECTIVELY

SUPPLY OF EPD FUZE PCBS PCB I PCB II ASSEMBLED WITH ALL ELECTRONIC COMPONENTS AS PER BILL OF MATERIAL AND GERBER FILES ENCLOSED AS ANNEXURE A AND ANNEXURE B RESPECTIVELY

SUPPLY OF EPD FUZE PCBS PCB I PCB II ASSEMBLED WITH ALL ELECTRONIC COMPONENTS AS PER BILL OF MATERIAL AND GERBER FILES ENCLOSED AS ANNEXURE A AND ANNEXURE B RESPECTIVELY

DRG.NO.:ADRDE/1297 ( b )

DRG.NO.:ADRDE/1297 ( b )

TRIGGER MECHANISM TO DRG. No. 2A46M CD 10-27CB

TRIGGER MECHANISM TO DRG. No. 2A46M CD 10-27CB

. 2A46M CD 10-27CB

FIRING MECHANISM ASSY. TO DRG NO. 2A46-CD10-20CB

FIRING MECHANISM ASSY. TO DRG NO. 2A46-CD10-20CB

2A46-CD10-20CB

INDUCTION HARDENING OF SECTOR DRG No. 675- 54-190

INDUCTION HARDENING OF SECTOR DRG No. 675- 54-190

675- 54-190

INDUCTION HARDENING OF SHIELD TO DRG NO 675 51 CD162CB 1005 560438 [ FOR FIRST TIME PROCUREMENT FIRM SHOULD DO TRIAL, TESTING OF FIRST SHIELD BY CUTTING/SECTIONING OF FIRST INDUCTION HARDENING SHIELD, PREPARING TEST PIECE AND HARDNESS TESTING AT 1MM INTERVALS, TO SHOW THE PROCESS ESTABLISHMENT FOR CORRECT HARDNESS AND DEPTH AS PER DRAWING ]. NOTE:- MATERIAL/COMPONENT WILL BE SUPPLIED BY GCF.

INDUCTION HARDENING OF SHIELD TO DRG NO 675 51 CD162CB 1005 560438 [ FOR FIRST TIME PROCUREMENT FIRM SHOULD DO TRIAL, TESTING OF FIRST SHIELD BY CUTTING/SECTIONING OF FIRST INDUCTION HARDENING SHIELD, PREPARING TEST PIECE AND HARDNESS TESTING AT 1MM INTERVALS, TO SHOW THE PROCESS ESTABLISHMENT FOR CORRECT HARDNESS AND DEPTH AS PER DRAWING ]. NOTE:- MATERIAL/COMPONENT WILL BE SUPPLIED BY GCF.

675 51 CD162CB 1005 560438

Fabric Plain Weave Flame Retardant Blue 150 cm width excluding selvedges.

Fabric Plain Weave Flame Retardant Blue 150 cm width excluding selvedges. Specification No.1201908/001

CERAMIC PLATES USED IN MANUFACTURE OF SIDE HARD ARMOUR PANELS (HAP) OF BODY ARMOURS SIZE LARGE.

CERAMIC PLATES USED IN MANUFACTURE OF SIDE HARD ARMOUR PANELS (HAP) OF BODY ARMOURS SIZE LARGE. SPECIFICATION NO.:1201909/003

CERAMIC PLATES USED IN MANUFACTURE OF SIDE HARD ARMOUR PANELS (HAP) OF BODY ARMOURS SIZE STANDARD.

CERAMIC PLATES USED IN MANUFACTURE OF SIDE HARD ARMOUR PANELS (HAP) OF BODY ARMOURS SIZE STANDARD. SPECIFICATION NO.:1201909/003

CERAMIC PLATES USED IN MANUFACTURE OF FRONT/BACK HARD ARMOUR PANELS (HAP) OF BODY ARMOURS SIZE LARGE

CERAMIC PLATES USED IN MANUFACTURE OF FRONT/BACK HARD ARMOUR PANELS (HAP) OF BODY ARMOURS SIZE LARGE SPECIFICATION NO.:1201909/003

CERAMIC PLATES USED IN MANUFACTURE OF FRONT/BACK HARD ARMOUR PANELS (HAP) OF BODY ARMOURS SIZE STANDARD.

CERAMIC PLATES USED IN MANUFACTURE OF FRONT/BACK HARD ARMOUR PANELS (HAP) OF BODY ARMOURS SIZE STANDARD. SPECIFICATION NO.:1201909/003

CAP CONDUCTING COMPOSITION EMPTY DRG PART NO. QX-115 A DC.NO.36230-A DATED 29-01-97 SPEC NO. L 10155 A (B) DC NO. 31887-A DATED 12-03-76

CAP CONDUCTING COMPOSITION EMPTY DRG PART NO. QX-115 A DC.NO.36230-A DATED 29-01-97 SPEC NO. L 10155 A (B) DC NO. 31887-A DATED 12-03-76

DRG PART NO. QX-115 A DC.NO.36230-A DATED 29-01-97 SPEC NO. L 10155 A (B) DC NO. 31887-A DATED 12-03-76

FUEL GAUGE ASSY AS PER DRAWINGS AND SPECIFICATIONS.

FUEL GAUGE ASSY AS PER DRAWINGS AND SPECIFICATIONS.

IT3 IC.000 CP OST B3 3177-75

PCB ASSEMBLY AS PER DRAWINGS AND SPECIFICATIONS.

PCB ASSEMBLY AS PER DRAWINGS AND SPECIFICATIONS.

AS PER ATTACHMENTS.

9927093106 SHIELDING BRAID (PML)- 16X24 SHIELD BRAID PML-16X24 AS PER SPECN.NO:-OLF/AL/SHIELD /01/MOD

9927093106 SHIELDING BRAID (PML)- 16X24 SHIELD BRAID PML-16X24 AS PER SPECN.NO:-OLF/AL/SHIELD /01/MOD

9927077166 SLEEVE PVC, 3.31TV40-2.5X0.4MM PVC SLEEVE 3.31TV40-2.5X0.4 AS PER JSS-54801 AND SPECN NO:OLF/AL/SLV/02/MOD

9927077166 SLEEVE PVC, 3.31TV40-2.5X0.4MM PVC SLEEVE 3.31TV40-2.5X0.4 AS PER JSS-54801 AND SPECN NO:OLF/AL/SLV/02/MOD

9927077150 SLEEVE PVC 3.31TV50-1.0X0.4 PVC SLEEVE (3.31TV 50)-1.0X0.4 MM AS PER JSS-54801 AND SPECN NO-OLF/MSD/SLV/02/MOD

9927077150 SLEEVE PVC 3.31TV50-1.0X0.4 PVC SLEEVE (3.31TV 50)-1.0X0.4 MM AS PER JSS-54801 AND SPECN NO-OLF/MSD/SLV/02/MOD

9001121614 POLY. WINDING WIRE PAEV -1-0.5 Drg No.GOST-7262-78 POLY. WINDING WIRE PAEV -1-0.5 AS PER GOST-7262-78

9001121614 POLY. WINDING WIRE PAEV -1-0.5 Drg No.GOST-7262-78 POLY. WINDING WIRE PAEV -1-0.5 AS PER GOST-7262-78

9001120710 WIRE MGSH-0.05, GOST-10349-75 WIRE MGSH-0.05, GOST-10349-75

9001120710 WIRE MGSH-0.05, GOST-10349-75 WIRE MGSH-0.05, GOST-10349-75

9001120436 SLEEVE(HEAT SHRINKABLE)-6X0.25 SLEEVE (HEAT SHRINKABLE SLEEVE )-NOMINAL SIZE-6X0.25 MM AS PER SPECN. NO: OLF/AII/AL/1 1/HSS ATTACHED

9001120436 SLEEVE(HEAT SHRINKABLE)-6X0.25 SLEEVE (HEAT SHRINKABLE SLEEVE )-NOMINAL SIZE-6X0.25 MM AS PER SPECN. NO: OLF/AII/AL/1 1/HSS ATTACHED

9001120308 SLEEVE-TLV-1.0 ,GOST-9614-75 SLEEVE-TLV-1.0, GOST-9614-75

9001120308 SLEEVE-TLV-1.0 ,GOST-9614-75 SLEEVE-TLV-1.0, GOST-9614-75

7441122809 SLEEVE F-4DE-2.5 X 0.4 Drg No.GOST-22056-76 SLEEVE F-4DE-2.5 X 0.4 AS PER GOST-22056-76

7441122809 SLEEVE F-4DE-2.5 X 0.4 Drg No.GOST-22056-76 SLEEVE F-4DE-2.5 X 0.4 AS PER GOST-22056-76

7441122799 WIRE MGSHV 1.5B Drg No.TU16-505.437-82 WIRE MGSHV 1.5B AS PER SPECN. NO. TU16-505.437-82

7441122799 WIRE MGSHV 1.5B Drg No.TU16-505.437-82 WIRE MGSHV 1.5B AS PER SPECN. NO. TU16-505.437-82

7441120500 PVC SLEEVE 2.0 X 0.4 MM PVC SLEEVE 2.0 X 0.4 MM WHITE COLOUR JSS-54808

7441120500 PVC SLEEVE 2.0 X 0.4 MM PVC SLEEVE 2.0 X 0.4 MM WHITE COLOUR JSS-54808

7441120366 PVC SLEEVE 3.0X0.4 PVC SLEEVE 3.0X0.4 WHITE COLOUR AS PER GOST 19034-82 JSS-54808

7441120366 PVC SLEEVE 3.0X0.4 PVC SLEEVE 3.0X0.4 WHITE COLOUR AS PER GOST 19034-82

7440901255 CORD SLEEVE SH CH SH CORD SLEEVE SH CH SH-1.0-23 AS PER SPECN. NO. OST 17-184-88

7440901255 CORD SLEEVE SH CH SH CORD SLEEVE SH CH SH-1.0-23 AS PER SPECN. NO. OST 17-184-88

SIDE FOLDABLE BUTT ASSY AS PER DRG NO K 4110 STAR 5 WITH FIRMS MATERIAL REQUIRED FOR TAR

SIDE FOLDABLE BUTT ASSY AS PER DRG NO K 4110 STAR 5 WITH FIRMS MATERIAL REQUIRED FOR TAR

K-4110*5

• AS PER DRAWING
• MACHINING
• FABRICATION

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

SPECN-ADRDE/271(b) NOTE-FIRM SHOULD ENGRAVE MCS ON THE COIL SPRING CROWN WITH OTHER ENGRAVINGS.

SPECN-ADRDE/271(b) NOTE-FIRM SHOULD ENGRAVE MCS ON THE COIL SPRING CROWN WITH OTHER ENGRAVINGS.

DRAWING ADRDE/271(b)

LOCKING BEAM (BEAM ASSEMBLY) TO DRG NO ADRDE-1404 (A) OR LATEST AMENDED DRG AS ON T.E.DATE

LOCKING BEAM (BEAM ASSEMBLY) TO DRG NO ADRDE-1404 (A) OR LATEST AMENDED DRG AS ON T.E.DATE

AUTOMATIC DISENGAGING UNIT (ADU) OF DRG NO. ADRDE-1413 (A) FOR AN-32 PLATFORM

AUTOMATIC DISENGAGING UNIT (ADU) OF DRG NO. ADRDE-1413 (A) FOR AN-32 PLATFORM

1413 (A)

• FORGING PLANT OR TIE UP WITH FORGING SUPPLIER
• DRILLING MACHINE
• LATHE MACHINE
• MILLING MACHINE & HEAT TREATMENT PLANT & TIE UP ANY SUPPLIER
• ARE WEILDING MACHINE

• LOAD TESTING MACHINE OR TIE UP WITH NABL LAB
• CHEMICAL TESTING
• MECHANICAL TESTING
• NDT TESTING

PFRL OF DRG NO ADRDE – 1412 FOR AN-32

PFRL OF DRG NO ADRDE – 1412 FOR AN-32

BODY DRG NO AL8035169 LF NO 7440205758

BODY DRG NO AL8035169 LF NO 7440205758

AL8.035.169

HOLDER TO DRG NO AL9.329.994 (LF7440205667)

HOLDER TO DRG NO AL9.329.994 (LF7440205667)

LEVER TO DRG NO BL9185830 LF NO 7420112083

LEVER TO DRG NO BL9185830 LF NO 7420112083

BL9185830

INTERMEDIATE GEAR FORGING TO DRG NO 175 45 005 F

DRG NO 175 45 005 F

FABRIC UNIDIRECTIONAL 160 CM WIDTH USED IN SOFT ARMOUR PANEL SAP OF BODY ARMOUR

FABRIC UNIDIRECTIONAL 160 CM WIDTH USED IN SOFT ARMOUR PANEL SAP OF BODY ARMOUR SPECIFICATION NO. : 1201909/001

BALLISTIC GRADE OF ULTRA HIGH MOLECULAR WEIGHT POLYETHYLENE UNIDIRECTIONAL FABRIC USED IN HARD ARMOUR PANEL HAP OF BODY ARMOURS

BALLISTIC GRADE OF ULTRA HIGH MOLECULAR WEIGHT POLYETHYLENE UNIDIRECTIONAL FABRIC USED IN HARD ARMOUR PANEL HAP OF BODY ARMOURS SPECIFICATION NO. : 1201909/002

STAINLESS STEEL TUBE TO SIZE OUTER DIA 125.00 (+) (-) 1.00 - MM X INNER DIA 100.00 (+) (-) 1.00 MM X 830.00 (+) 2.00 MM LONG TO SPECN: AISI-316.OR,AISI-304.

STAINLESS STEEL TUBE TO SIZE OUTER DIA 125.00 (+) (-) 1.00 - MM X INNER DIA 100.00 (+) (-) 1.00 MM X 830.00 (+) 2.00 MM LONG TO SPECN: AISI-316.OR,AISI-304.

INVESTMENT CASTING FOR SLIDE(RETRACTING)TO RFI SK.NO.5709*14FOR RIFLE 5.56MM INSAS

INVESTMENT CASTING FOR SLIDE(RETRACTING)TO RFI SK.NO.5709*14FOR RIFLE 5.56MM INSAS

RFI SK.NO.5709*14

9081008167 LINK BEARING TO DRAWING NO 6289044

LINK BEARING TO DRAWING NO.6289044.

9081008166 SPHERICAL BEARING TO DRAWING NO

SPHERICAL BEARING TO DRAWING NO.6293295.

9081008165 BEARING TO DRAWING NO 6293496

BEARING TO DRAWING NO.6293496.

9081008164 SPHERICAL BEARING TO DRAWING NO

SPHERICAL BEARING TO DRAWING NO.6298987.

9081008163 SPHERICAL BEARING TO DRAWING NO

SPHERICAL BEARING TO DRAWING NO.6298988.