MS PLATE OF SIZE 126 + 1.0-0.0 X 126 + 1.0-0.0X 3MM THICK (PHOSPATED) TO SPEC IS : 2062-1994 OF ANY GRADE, CORNER RADIUS 3R. ALL SHARP CORNERS TO BE REMOVED. TESTING TO BE DONE FOR TENSILE & ELONGATION. HEMRL DRG NO 1517- DETL NO. 3
Specification
MS PLATE OF SIZE 126 + 1.0-0.0 X 126 + 1.0-0.0X 3MM THICK (PHOSPATED) TO SPEC IS : 2062-1994 OF ANY GRADE, CORNER RADIUS 3R. ALL SHARP CORNERS TO BE REMOVED. TESTING TO BE DONE FOR TENSILE & ELONGATION. HEMRL DRG NO 1517- DETL NO. 3
POTASSIUM NITRATE GRADE I FOR EXPLOSIVE AND PYROTECHNIC COMPOSITION TO SPECN IS:301-1982 (SECOND REVISION) REAFFIRMED 2016 AMDS 1 DC NO 3810 ME DTD 5-5-04 SIZE ALL PASSING THROUGH 125 MICROMETER I S SIEVE.
Specification
POTASSIUM NITRATE GRADE I FOR EXPLOSIVE AND PYROTECHNIC COMPOSITION TO SPECN IS:301-1982 (SECOND REVISION) REAFFIRMED 2016 AMDS 1 DC NO 3810 ME DTD 5-5-04 SIZE ALL PASSING THROUGH 125 MICROMETER I S SIEVE.
SET CONSIST OF 1) PIECE PACKING END-2 NOS TO DRG.NO.CQ(A)/AMN/2650 ISV 1823 DC 34626-A 2) PIECE PACKING BOTTOM - NOS 280 X 205X 6MM THICKS AS MENTIONED IN DRG NO CQA(A)/AMN/2650 ISV 482 GA DC 37330-A
NO. PROVISIONAL SCHEDULE NO.S/5387/BONDED POLYESTER FLEECE OG/2009/TC-19.AS PER CQA(T&C) /PMS/35(d) EXCEPT THAT FABRIC WILL BE SUPPLIED IN ROLL FORM ONLY.AS PER CQA(T&C) KANPUR QAI NO.CQA(T&C)/QAI/99 TC-11
Specification
NO. PROVISIONAL SCHEDULE NO.S/5387/BONDED POLYESTER FLEECE OG/2009/TC-19.AS PER CQA(T&C) /PMS/35(d) EXCEPT THAT FABRIC WILL BE SUPPLIED IN ROLL FORM ONLY.AS PER CQA(T&C) KANPUR QAI NO.CQA(T&C)/QAI/99 TC-11
Drawing no.
Manufacturing Technology
Testing / Inspection Facility
21
18247
Metre
9365
MPF/PV/19TE210308
Machine Tool Proto Type Factory
The General Manager,
Ambarnath
Ambarnath
Ambernath, Maharashtra
421502
SURFACE TREATMENT OPERATION VIZ: NICKEL PLATING (WITH COPPER - UNDER COAT ) TO SPEC BS: 1224-1970 FOLLOWED BY ELECTRO PHORETIC LAQUERING WITH BLACKISH TINGE WITH SOLID CONTENT 9.9 TO 13% AND PH: 5.2 TO 5.6. THICKNESS OF LAQUER 5 TO 6 MICRON ON COMP PB1, PB3, PB6, PB7, PB9, PB10, PB 15, PB23, PB 32, PB39, PB41 & CTM 0099
Specification
SURFACE TREATMENT OPERATION VIZ: NICKEL PLATING (WITH COPPER - UNDER COAT ) TO SPEC BS: 1224-1970 FOLLOWED BY ELECTRO PHORETIC LAQUERING WITH BLACKISH TINGE WITH SOLID CONTENT 9.9 TO 13% AND PH: 5.2 TO 5.6. THICKNESS OF LAQUER 5 TO 6 MICRON
TARGET PLATE-15 CDV6 -STEEL FOR FLSC-10 15 CDV6-STEEL L= 350 MM W=75 MM THICKNESS 3.50 MM 0.20 MM -0.00 MM.COMP=C= 0.1TO 0.16,Mn=0.8TO1.1,Si=0.2,Ni=0.5,Cr1.25TO1.5,Mo=0.8 TO 1,V=0.2TO0.3,S=0.03 MAX,P=0.03 MAX.ULTIMATE TENSILE STRENGT H=95-100KG/MM2,HARDNESS=290 TO 313 BHN. SPECIFICATION ARE IND/ME/911:2015 DC NO. 5433-ME Dt 18.04.2016
Specification
TARGET PLATE-15 CDV6 -STEEL FOR FLSC-10 15 CDV6-STEEL L= 350 MM W=75 MM THICKNESS 3.50 MM 0.20 MM -0.00 MM.COMP=C= 0.1TO 0.16,Mn=0.8TO1.1,Si=0.2,Ni=0.5,Cr1.25TO1.5,Mo=0.8 TO 1,V=0.2TO0.3,S=0.03 MAX,P=0.03 MAX.ULTIMATE TENSILE STRENGT H=95-100KG/MM2,HARDNESS=290 TO 313 BHN. SPECIFICATION ARE IND/ME/911:2015 DC NO. 5433-ME Dt 18.04.2016
TARGET PLATE-15 CDV6 -STEEL FOR FLSC-10 15 CDV6-STEEL L= 350 MM W=75 MM THICKNESS 3.50 MM 0.20 MM -0.00 MM.COMP=C= 0.1TO 0.16,Mn=0.8TO1.1,Si=0.2,Ni=0.5,Cr1.25TO1.5,Mo=0.8 TO 1,V=0.2TO0.3,S=0.03 MAX,P=0.03 MAX.ULTIMATE TENSILE STRENGT H=95-100KG/MM2,HARDNESS=290 TO 313 BHN. SPECIFICATION ARE IND/ME/911:2015 DC NO. 5433-ME Dt 18.04.2016
M.S.TARGET PLATE FOR CLC-3 SIZE: 1000 MM X 300 MM X 16 MM. TOL. ON THICKNESS 5% & MATERIAL SPECN NO-IS 2062-2011 Reaffirmed 2016 seventh revision AS PER HEMRL DOC NO-HEMRL/HE/99/8.
Specification
M.S.TARGET PLATE FOR CLC-3 SIZE: 1000 MM X 300 MM X 16 MM. TOL. ON THICKNESS 5% & MATERIAL SPECN NO-IS 2062-2011 Reaffirmed 2016 seventh revision AS PER HEMRL DOC NO-HEMRL/HE/99/8.
M.S.TARGET PLATE FOR CLC-3 SIZE: 1000 MM X 300 MM X 16 MM. TOL. ON THICKNESS 5% & MATERIAL SPECN NO-IS 2062-2011 Reaffirmed 2016 seventh revision AS PER HEMRL DOC NO-HEMRL/HE/99/8.
,13 - 1.5 MM WIDE,WEAVE PLAIN FOR TWILL,TOTAL WARP ENDS MIN. 35 WEFT PICKS PER DM MIN. 125 FINISHED MASS PER 100 M GMS. 210 - 5%,BREAKING LOAD ON FULL WIDTH X 20 CM. BETWEEN GRIP MIN. 145 N,
AS PER IS:3255-1979(FIRST REVISION) REAFFIRMED 2019.
Drawing no.
Manufacturing Technology
,13 - 1.5 MM WIDE,WEAVE PLAIN FOR TWILL,TOTAL WARP ENDS MIN. 35 WEFT PICKS PER DM MIN. 125 FINISHED MASS PER 100 M GMS. 210 - 5%,BREAKING LOAD ON FULL WIDTH X 20 CM. BETWEEN GRIP MIN. 145 N,
AS PER IS:3255-1979(FIRST REVISION) REAFFIRMED 2019.
,13 - 1.5 MM WIDE,WEAVE PLAIN FOR TWILL,TOTAL WARP ENDS MIN. 35 WEFT PICKS PER DM MIN. 125 FINISHED MASS PER 100 M GMS. 210 - 5%,BREAKING LOAD ON FULL WIDTH X 20 CM. BETWEEN GRIP MIN. 145 N,
AS PER IS:3255-1979(FIRST REVISION) REAFFIRMED 2019.
TAPE SELF ADHESIVE PVC ELECTRICAL INSULATION SPECN. NO.-IS 7809 1992 reaffirmed-2016 PART-3 SECTION-1, F PVC/90/0/TP SIZE- 25 MM WIDTH X 0.125 MM THICK COLOR RED.
Specification
TAPE SELF ADHESIVE PVC ELECTRICAL INSULATION SPECN. NO.-IS 7809 1992 reaffirmed-2016 PART-3 SECTION-1, F PVC/90/0/TP SIZE- 25 MM WIDTH X 0.125 MM THICK COLOR RED.
TAPE SELF ADHESIVE PVC ELECTRICAL INSULATION SPECN. NO.-IS 7809 1992 reaffirmed-2016 PART-3 SECTION-1, F PVC/90/0/TP SIZE- 25 MM WIDTH X 0.125 MM THICK COLOR RED.
TAPE SELF ADHESIVE PVC ELECTRICAL INSULATION SPECN. NO.-IS 7809 1992 reaffirmed-2016 PART-3 SECTION-1, F PVC/90/0/TP SIZE- 25 MM WIDTH X 0.125 MM THICK COLOR BLACK.
Specification
TAPE SELF ADHESIVE PVC ELECTRICAL INSULATION SPECN. NO.-IS 7809 1992 reaffirmed-2016 PART-3 SECTION-1, F PVC/90/0/TP SIZE- 25 MM WIDTH X 0.125 MM THICK COLOR BLACK.
TAPE SELF ADHESIVE PVC ELECTRICAL INSULATION SPECN. NO.-IS 7809 1992 reaffirmed-2016 PART-3 SECTION-1, F PVC/90/0/TP SIZE- 25 MM WIDTH X 0.125 MM THICK COLOR BLACK.
PRESSURE SENSITIVE ADHESIVE PLASTICISED PVC TAPE TRANSPARENT THICKNESS 0.2 MM MAXIMUM WITH BREAKING STRENGTH 4.0 KG. MIN. ELONGATION AT BREAK 20% MIN. 38 MM - 1.5 MM WIDE IN ROLLS OF 65 MTRS. LENGTH TO SPECN. IS:13262-1992 REAFFIRMED 2018 ,AMDS 1 EXCEPT FOR DURABILITY TEST.(AS GIVEN IN THE ANNEXURE "A".).
Specification
PRESSURE SENSITIVE ADHESIVE PLASTICISED PVC TAPE TRANSPARENT THICKNESS 0.2 MM MAXIMUM WITH BREAKING STRENGTH 4.0 KG. MIN. ELONGATION AT BREAK 20% MIN. 38 MM - 1.5 MM WIDE IN ROLLS OF 65 MTRS. LENGTH TO SPECN. IS:13262-1992 REAFFIRMED 2018 ,AMDS 1 EXCEPT FOR DURABILITY TEST.(AS GIVEN IN THE ANNEXURE "A".).
PRESSURE SENSITIVE ADHESIVE PLASTICISED PVC TAPE TRANSPARENT THICKNESS 0.2 MM MAXIMUM WITH BREAKING STRENGTH 4.0 KG. MIN. ELONGATION AT BREAK 20% MIN. 38 MM - 1.5 MM WIDE IN ROLLS OF 65 MTRS. LENGTH TO SPECN. IS:13262-1992 REAFFIRMED 2018 ,AMDS 1 EXCEPT FOR DURABILITY TEST.(AS GIVEN IN THE ANNEXURE "A".).
STRONG NITRIC ACID CONFORMING TO IS:264:2005(Reaffirmed Year : 2017 ) EXPLOSIVE GR.WITH SPECIFIC REQURIMENET TO FOLLOWING CLAUSES OF TABLE-I CLAUSE 4.2 TOTAL ACIDITY (AS HNO3)% BY MASS MINIMUM 98.5% NITRIOUS ACID MAX 0.08% BY MASS(AS HNO2) SULPHATE NOT MORE THAN 0.2%.
Specification
STRONG NITRIC ACID CONFORMING TO IS:264:2005(Reaffirmed Year : 2017 ) EXPLOSIVE GR.WITH SPECIFIC REQURIMENET TO FOLLOWING CLAUSES OF TABLE-I CLAUSE 4.2 TOTAL ACIDITY (AS HNO3)% BY MASS MINIMUM 98.5% NITRIOUS ACID MAX 0.08% BY MASS(AS HNO2) SULPHATE NOT MORE THAN 0.2%.
STRONG NITRIC ACID CONFORMING TO IS:264:2005(Reaffirmed Year : 2017 ) EXPLOSIVE GR.WITH SPECIFIC REQURIMENET TO FOLLOWING CLAUSES OF TABLE-I CLAUSE 4.2 TOTAL ACIDITY (AS HNO3)% BY MASS MINIMUM 98.5% NITRIOUS ACID MAX 0.08% BY MASS(AS HNO2) SULPHATE NOT MORE THAN 0.2%.
COLD ROLLED STEEL STRIPS. WIDTH 3/4 " THICKNESS- 0.80-PLUS,MINUS 0.04MM.NOTE;MATERIAL SHOULD CONFRM TO IS-5872-1990 REAFFIRMED-2015(II REV)GRADE I SUAITABLY BLUED FOR RUSTPROOF. TEST REPORT OF MAT. FROM GOVT.APPROVED LAB IS REQUIRED FOR CHEM.COMP & MECH.PROPERTS
Specification
COLD ROLLED STEEL STRIPS. WIDTH 3/4 " THICKNESS- 0.80-PLUS,MINUS 0.04MM.NOTE;MATERIAL SHOULD CONFRM TO IS-5872-1990 REAFFIRMED-2015(II REV)GRADE I SUAITABLY BLUED FOR RUSTPROOF. TEST REPORT OF MAT. FROM GOVT.APPROVED LAB IS REQUIRED FOR CHEM.COMP & MECH.PROPERTS
COLD ROLLED STEEL STRIPS. WIDTH 3/4 " THICKNESS- 0.80-PLUS,MINUS 0.04MM.NOTE;MATERIAL SHOULD CONFRM TO IS-5872-1990 REAFFIRMED-2015(II REV)GRADE I SUAITABLY BLUED FOR RUSTPROOF. TEST REPORT OF MAT. FROM GOVT.APPROVED LAB IS REQUIRED FOR CHEM.COMP & MECH.PROPERTS
