NETTING MOSQUITO ROUND MESH POLYESTER FLAME RETARDENT KHAKI ONE SET COSISTING OF :- (I) NETTING MOSQUITO R/M F/R KHAKI 124cm=6.12Mtr., (II) NETTING MOSQUITO R/M F/R KHAKI 109cm=2.02Mtr., SPECN. No. D/4211/99/TC-11(c) AND Annxure-"A" ,WIDTH OF THE MATRL.- (I) & (II) WILL BE 124cm & 109cm RESPECTIVELY HAVING BUILT IN SELVEDGE OF 20mm (min) ON BOTH SIDES . BOLT LENGTH FOR MTRL.-(I) WILL BE 24.50 Mtr. AND ABOVE IN MULTIPLE OF 6.12 Mtr. , BOLT LENGTH OF MTRL.-(II) WILL BE 24 Mtr. AND ABOVE IN MULTIPLE OF 2Mtr. SPECN.:- D/4211/99/TC-11(C) AND ANNEXURE 'A'

NETTING MOSQUITO ROUND MESH POLYESTER FLAME RETARDENT KHAKI ONE SET COSISTING OF :- (I) NETTING MOSQUITO R/M F/R KHAKI 124cm=6.12Mtr., (II) NETTING MOSQUITO R/M F/R KHAKI 109cm=2.02Mtr., SPECN. No. D/4211/99/TC-11(c) AND Annxure-"A" ,WIDTH OF THE MATRL.- (I) & (II) WILL BE 124cm & 109cm RESPECTIVELY HAVING BUILT IN SELVEDGE OF 20mm (min) ON BOTH SIDES . BOLT LENGTH FOR MTRL.-(I) WILL BE 24.50 Mtr. AND ABOVE IN MULTIPLE OF 6.12 Mtr. , BOLT LENGTH OF MTRL.-(II) WILL BE 24 Mtr. AND ABOVE IN MULTIPLE OF 2Mtr. SPECN.:- D/4211/99/TC-11(C) AND ANNEXURE 'A'

• AS PER ATTACHED MANUFACTURING TECHNOLOGY FILES

• AS PER ATTACHED TESTING / INSPECTION FACILITY FILES

AS PER SPECIFICATION

AS PER SPECIFICATION

AS PER REQUIREMENT & SPECIFICATION

AS PER REQUIREMENT & SPECIFICATION

AS PER DRG.& SPECIFICATION

AS PER DRG.& SPECIFICATION

AS PER DRG.& SPECIFICATION

AS PER DRG.& SPECIFICATION

AS PER DRG.& SPECIFICATION

AS PER DRG.& SPECIFICATION

AS PER REQUIREMENT & SPECIFICATION

AS PER REQUIREMENT & SPECIFICATION

AS PER REQUIREMENT & SPECIFICATION

AS PER REQUIREMENT & SPECIFICATION

WEBBING COTTON BAND 3.00 MM THICK X 25 MM WIDTH SUITABLE MOULD PROOFED DYED OLIVE GREEN ( ISC-220 OF IS-5-78 ) TO SPECN: JSS-8305-18-93 DC NO.3176 ME DATED 12TH AUGUST 94. NOTE:-TEST CERTIFICATE FROM NABL OR GOVT.APPROVED LABORATORIES FOR CONFORMING THE MATERIAL AS PER-F.O.R. OFBH,BHUSAWAL

WEBBING COTTON BAND 3.00 MM THICK X 25 MM WIDTH SUITABLE MOULD PROOFED DYED OLIVE GREEN ( ISC-220 OF IS-5-78 ) TO SPECN: JSS-8305-18-93 DC NO.3176 ME DATED 12TH AUGUST 94. NOTE:-TEST CERTIFICATE FROM NABL OR GOVT.APPROVED LABORATORIES FOR CONFORMING THE MATERIAL AS PER-F.O.R. OFBH,BHUSAWAL

WEBBING COTTON BAND 2.5 MM +/- 0.25 MM THICK X 25.4 MM +/- 1.3 MM WIDTH DYED OLIVE GREEN (ISC-220 OF IS-5-1994 AMMENDMENT NO.1 FOURTH REVISION) SUITABLE MOULD PROOFED TO SPECN :"JSS-8305-18-1993" "DC NO.3176-ME DATED 12.08.1994" NOTE :- TEST CERTIFICATE FROM NABL OR GOVT.APPROVED LAB.-F.O.R. OFBH,BHUSAWAL

WEBBING COTTON BAND 2.5 MM +/- 0.25 MM THICK X 25.4 MM +/- 1.3 MM WIDTH DYED OLIVE GREEN (ISC-220 OF IS-5-1994 AMMENDMENT NO.1 FOURTH REVISION) SUITABLE MOULD PROOFED TO SPECN :"JSS-8305-18-1993" "DC NO.3176-ME DATED 12.08.1994" NOTE :- TEST CERTIFICATE FROM NABL OR GOVT.APPROVED LAB.-F.O.R. OFBH,BHUSAWAL

DRG.NO.OFB/SK/712

GASKET RUBBER FOR BOX H2A OF VULCANISED NATURAL RUBBER CLASS A TO SPECN.IND/ME/584(F) AS PER DRG.NO.CIA/AMMN/2389 PT.NO. ISV 1727 DC 35607-A (OFB DRG.NO.OFB/SK/712), COLOUR - BLACK NOTE:- THE FIRM SHALL GET SAMPLE APPROVED BEFORE GOING TO MANUFACTURING OF BULK ALONGWITH CONFIRMATION OF-F.O.R. OFBH,BHUSAWAL

DRG.NO.OFB/SK/712

CAPCELL WITH ADHESIVE BACK OF CROSS LINKED POLYTHYLENE FOAM SIZE :- 90X 60 X 45 MM THICK,COLOUR BLACK,AS PER SPECIFICATION IND/ME/1023 (PROV) LATEST ISSUE. NOTE :- TEST CERTIFICATE FROM NABL OR GOVT.APPROVED LAB. FOR ABOVE PROPERTIES SHOULD BE PRODUCED ALONGWITH-F.O.R. OFBH,BHUSAWAL

CAPCELL WITH ADHESIVE BACK OF CROSS LINKED POLYTHYLENE FOAM SIZE :- 90 X 60 X 45 MM THICK,COLOUR BLACK,AS PER SPECIFICATION IND/ME/1023 (PROV) LATEST ISSUE. NOTE :- TEST CERTIFICATE FROM NABL OR GOVT.APPROVED LAB. FOR ABOVE PROPERTIES SHOULD BE PRODUCED ALONGWITH-F.O.R. OFBH,BHUSAWAL

CAPCELL WITH ADHESIVE BACK OF CROSS LINKED POLYTHYLENE FOAM SIZE :- 90 X 60 X 35 MM THICK,COLOUR BLACK,AS PER SPECIFICATION IND/ME/1023 (PROV) LATEST ISSUE. NOTE :- TEST CERTIFICATE FROM NABL OR GOVT.APPROVED LAB. FOR ABOVE PROPERTIES SHOULD BE PRODUCED ALONGWITH-F.O.R. OFBH,BHUSAWAL

CAPCELL WITH ADHESIVE BACK OF CROSS LINKED POLYTHYLENE FOAM SIZE :- 90 X 60 X 35 MM THICK,COLOUR BLACK,AS PER SPECIFICATION IND/ME/1023 (PROV) LATEST ISSUE. NOTE :- TEST CERTIFICATE FROM NABL OR GOVT.APPROVED LAB. FOR ABOVE PROPERTIES SHOULD BE PRODUCED ALONGWITH-F.O.R. OFBH,BHUSAWAL

CAPCELL WITH ADHESIVE BACK OF CROSS LINKED POLYTHYLENE FOAM SIZE :- 80 X 60 X 30 MM THICK,COLOUR BLACK,AS PER SPECIFICATION IND/ME/1023 (PROV) LATEST ISSUE. NOTE :- TEST CERTIFICATE FROM NABL OR GOVT.APPROVED LAB. FOR ABOVE PROPERTIES SHOULD BE PRODUCED ALONGWITH-F.O.R. OFBH,BHUSAWAL

CAPCELL WITH ADHESIVE BACK OF CROSS LINKED POLYTHYLENE FOAM SIZE :- 80 X 60 X 30 MM THICK,COLOUR BLACK,AS PER SPECIFICATION IND/ME/1023 (PROV) LATEST ISSUE. NOTE :- TEST CERTIFICATE FROM NABL OR GOVT.APPROVED LAB. FOR ABOVE PROPERTIES SHOULD BE PRODUCED ALONGWITH-F.O.R. OFBH,BHUSAWAL

ACAPCELL WITH ADHESIVE BACK OF CROSS LINKED POLYTHYLENE FOAM SIZE :- 80 X 15 X 18 MM THICK,COLOUR BLACK,AS PER SPECIFICATION IND/ME/1023 (PROV) LATEST ISSUE. NOTE :- TEST CERTIFICATE FROM NABL OR GOVT.APPROVED LAB. FOR ABOVE PROPERTIES SHOULD BE PRODUCED ALONGWITH-F.O.R. OFBH,BHUSAWAL

CAPCELL WITH ADHESIVE BACK OF CROSS LINKED POLYTHYLENE FOAM SIZE :- 80 X 15 X 18 MM THICK,COLOUR BLACK,AS PER SPECIFICATION IND/ME/1023 (PROV) LATEST ISSUE. NOTE :- TEST CERTIFICATE FROM NABL OR GOVT.APPROVED LAB. FOR ABOVE PROPERTIES SHOULD BE PRODUCED ALONGWITH-F.O.R. OFBH,BHUSAWAL

ISC-220 OF IS -5-1994

PAINT R/M,A/D,SPRAYING,MATT FINISH,OLIVE GREEN ISC-220 OF IS-5-1994 (FOURTH REVISION) AMENDMENT NO.1 TO SPECIFICATION IS-168-1993 (THIRD REVISION) AS APPLICABLE FOR DEFENCE USE. ADDITION CLAUSE IN THE SPECIFICATION:A)DRYING TIME 1.SURFACE E DRY - NOT MORE THAN 01 HOUR 2.HARD DRY - NOT MORE THAN 03-F.O.R. OFBH,BHUSAWAL

RUST REMOVING SOLUTION, CONFORMING TO SPECIFICATIONS : JSS-8030-5-1993,DS CAT NO.8030-000015 WITH THE CONDITION CONCENTRATION OF BATH : 25%, TEMPERATURE : 60-75 DEG C, IMMERSION TIME : 15-20 MINUTES, SPECIFIC GRAVITY : 1.40-1.45 NOTE:- 1) TO BE SUPPLIED IN 20 LIT. BLACK CONTAINERS.-F.O.R. OFBH,BHUSAWAL

RUST REMOVING SOLUTION, CONFORMING TO SPECIFICATIONS : JSS-8030-5-1993,DS CAT NO.8030-000015 WITH THE CONDITION CONCENTRATION OF BATH : 25%, TEMPERATURE : 60-75 DEG C, IMMERSION TIME : 15-20 MINUTES, SPECIFIC GRAVITY : 1.40-1.45 NOTE:- 1) TO BE SUPPLIED IN 20 LIT. BLACK CONTAINERS.-F.O.R. OFBH,BHUSAWAL

IZINC PHOSPHATING COMPOUND, CONFORMING TO SPECIFICATIONS : JSS-0465-01-94 CLASS-II, FREE FROM PRECIPITATION, SPECIFIC GRAVITY:- 1.55-1.57, POINTAGE RANGE:- 30-35 (IN 100 LITRES OF WATER WITH 2.5 LITRES OF ZINC PHOSPHATING COMPOUND AND 2 LITRES OF STARTER, BATH TEMP:- 70-85 DEGREE C, IMMERSION-F.O.R. OFBH,BHUSAWAL

ZINC PHOSPHATING COMPOUND, CONFORMING TO SPECIFICATIONS : JSS-0465-01-94 CLASS-II, FREE FROM PRECIPITATION, SPECIFIC GRAVITY:- 1.55-1.57, POINTAGE RANGE:- 30-35 (IN 100 LITRES OF WATER WITH 2.5 LITRES OF ZINC PHOSPHATING COMPOUND AND 2 LITRES OF STARTER, BATH TEMP:- 70-85 DEGREE C, IMMERSION-F.O.R. OFBH,BHUSAWAL

DRG, NO.OFB/C/1564

DRG, NO.OFB/C/1564

DRG, NO.OFB/C/1564

AS PER O.F.BHUSAWAL DRAWING/SPECIFICATION

AS PER O.F.BHUSAWAL DRAWING/SPECIFICATION

OFBH DRG NO. OFB/C/1484

AS PER OFB DRG NO. OFB/C/1487 & ISV 2049

AS PER OFB DRG NO. OFB/C/1487 & ISV 2049

OFBh-C53A-C-2055

As per O.F.Bhusawal Drawing/Specification

As per O.F.Bhusawal Drawing/Specification

OFB/C/1483

AS PER DRG. NO. OFB/C/1477

AS PER DRG. NO. OFB/C/1477

DRG. NO. OFB/C/1477

AS PER O.F.BHUSAWAL REQUIRED DRAWING/SPECIFICATION

AS PER O.F.BHUSAWAL REQUIRED DRAWING/SPECIFICATION

OFBH DRG NO. OFB/C/1480

AS PER DRG./SPECIFICATION

AS PER DRG./SPECIFICATION

OFB/C/1585

AS PER O.F.BHUSAWAL DRAWING/SPECIFICATION

AS PER O.F.BHUSAWAL DRAWING/SPECIFICATION

OFB/C/1565

AS PER O.F.BHUSAWAL DRAWING/SPECIFICATION

AS PER O.F.BHUSAWAL DRAWING/SPECIFICATION

OFB/C/1482

AS PER DRG./SPECIFICATION

AS PER DRG./SPECIFICATION

OFBH DRG NO. OFB/C/1481

AS PER O.F.BHUSAWAL DRAWING

AS PER O.F.BHUSAWAL DRAWING

ISV 2043 OFBH DRG NO. OFB/C/1479

AS PER O.F.BSL DRAWING/SPECIFICATION

AS PER O.F.BSL DRAWING/SPECIFICATION

OFBH DRG NO. OFB/C/1757

AS PER O.F.BHUSAWAL REQUIRED DRAWING/SPECIFICATION

AS PER O.F.BHUSAWAL REQUIRED DRAWING/SPECIFICATION

OFB/C/1486

DRG, NO.OFB/C/1564

DRG, NO.OFB/C/1564

DRG, NO.OFB/C/1564

Drg.No. OFB/C/1410-A

Drg.No. OFB/C/1410-A

Drg.No. OFB/C/1410-A

AS PER O.F. BHUSAWAL DRAWING/SPECIFICATION

CATCH AS PER DRG NO OFB/C/1561 & CQA PART NO. ISV-585A CORROSPONDING AHSP DRG NO.ISV-585A DC 35750 DATED 14/07/1994.

OFBH DRG NO. OFB/C/1561

AS PER O.F.BHUSAWAL DRAWING/SPECIFICATION

AS PER O.F.BHUSAWAL DRAWING/SPECIFICATION

OFB/C/1488

DRG.NO OFB/C/1540

DRG.NO OFB/C/1540

DRG.NO OFB/C/1540

AS PER DRG./SPECIFICATION

AS PER DRG./SPECIFICATION

OFBH DRG NO. OFB/C/1476

AS PER O.F.BHUSAWAL REQUIRED DRAWING/SPECIFICATION

AS PER O.F.BHUSAWAL REQUIRED DRAWING/SPECIFICATION

OFBH-SM601-C-2002

PIECE PAKING 'B' FOR BOX C44A

AS PER DRG NO. OFB/C/1541

DRG NO. OFB/C/1541

AS PER O.F.BHUSAWAL REQUIRED DRAWING/SPECIFICATION

AS PER O.F.BHUSAWAL REQUIRED DRAWING/SPECIFICATION

OFBH-SM601-C-2003

PIECE PAKING A AS PER REF. PART NO. ISV 1820

PIECE PAKING A AS PER REF. PART NO. ISV 1820

OFBH DRG NO. OFB/C/1539

AS PER DRG./SPECIFICATION

AS PER DRG./SPECIFICATION

OFBH DRG NO. OFB/C/717

AS PER DRG./SPECIFICATION

AS PER DRG./SPECIFICATION

OFBH DRG NO. OFB/C/722

AS PER O.F.BHUSAWAL DRAWING/SPECIFICATION

AS PER O.F.BHUSAWAL DRAWING/SPECIFICATION

OFBH DRG NO. OFB/C/803

AS PER O.F.BHUSAWAL DRAWING/SPECIFICATION

AS PER O.F.BHUSAWAL DRAWING/SPECIFICATION

OFB/C/804

ENGAGING PLATE FOR BOX H2A AS PER DRG.NO.OFB/C/718.

ENGAGING PLATE FOR BOX H2A AS PER DRG.NO.OFB/C/718.

HINGE WITH HINGE PIN ASSEMBLY FOR BOX H2A AS PER DRAWING NO. 0FBH-H2A-C-2067

HINGE WITH HINGE PIN ASSEMBLY FOR BOX H2A AS PER DRAWING NO. 0FBH-H2A-C-2067

DRAWING NO. 0FBH-H2A-C-2067

AS PER DRG./SPECIFICATION

ANGLE PLATE VERTICAL FOR CARRIER 13A/16A AS PER DRG NO. OFBH-CA-13-C-1969

OFBH-CA-13-C-1969

CIA 3807(d) Drg. No. DD(L) 13461/A/1

CIA 3807(d) Drg. No. DD(L) 13461/A/1

Fabric Nylon Knitted Aluminized Coated 100 cm ( Min) Width Specification No-IND/TC/0161

IND/TC/0161. Packing & Marking- As per relevant clause of specification Sampling Plan:- As per relevant clause of specification

SUPPLY OF TRIGGER AS PER DRG NO K2064 STAR 4 WITH FIRMS MATERIAL

SUPPLY OF TRIGGER AS PER DRG NO K2064 STAR 4 WITH FIRMS MATERIAL

K 2064 STAR 4

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

BOLT CARRIER BLANK AS PER DRG No. TEND 2383 WITH FIRM'S MATERIAL

AS PER DRG No. TEND 2383 WITH FIRM'S MATERIAL

TEND 2383

SUPPLY OF HAMMER AS PER DRG NO K 2061 STAR2 WITH FIRMS MATERIAL

SUPPLY OF HAMMER AS PER DRG NO K 2061 STAR2 WITH FIRMS MATERIAL

K 2061 STAR2

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

PREMACHINED BLANK STAGE 2 FOR K 1205 AS PER DRG NO.TEND2450 WITH FIRM'S MATERIAL

AS PER DRG NO.TEND2450 WITH FIRM'S MATERIAL

TEND 2450

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

SUPPLY OF PREMACHINED BLANK S 2 TO DRG NO TEND 2607 STAR 5 WITH OFT SUPPLIED MATERIAL REQUIRED FOR K 3001STAR4 FIXED BUTT FOR TAR

AS PER DRG NO. TEND 2607 STAR 5 WITH OFT MATERIAL

K 3001 STR 4

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

BLANK CARTRIDGE NOZZLE AS PER DRG No K 9022 WITH FIRMS MATERIAL

AS PER DRG No K 9022 WITH FIRMS MATERIAL

K 9022

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

DRIFT AS PER DRG No. K 9004 WITH FIRM'S MATERIAL

AS PER DRG No. K 9004 WITH FIRM'S MATERIAL

K 9004

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

SELECTOR LEVER AS PER DRG.NO.K 2074 WITH FIRM'S MATERIAL

AS PER DRG.NO.K 2074 WITH FIRM'S MATERIAL

K 2074

• AS PER DRAWING ATTACHED

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

GUIDE ROD FRONT RECOIL SPRING AS PER DRG No K 2031 WITH FIRMS MATERIAL

AS PER DRG No K 2031

K 2031

• AS PER DRAWING ATTACHED

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

FIRING PIN AS PER DRG No. K 2015 WITH FIRM'S MATERIAL

AS PER DRG No. K 2015 WITH FIRM'S MATERIAL

K 2015

• AS PER DRAWING ATTACHED

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

BOLT GRIP PISTOL AS PER DRG No. K 1027 WITH FIRM'S MATERIAL

AS PER DRG No. K 1027 WITH FIRM'S MATERIAL

K 1027

• AS PER DRAWING ATTACHED

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

As Per Requirements & Specifications

As Per Requirements & Specifications

AS PER REQUIREMENT & SPECIFICATION

AS PER REQUIREMENT & SPECIFICATION

S/2594/CCD Army Logo/TC-15 (a)

S/2594/CCD Army Logo/TC-15 (a)

AS PER REQUIREMENT AND ASPECIFICATION

IS:10945-1984 & IS:1570-PART-II-1979

CONVERSION OF BOLT BREECH FROM FORGING TO DRG.NO.29P 0013* (M) required for 0.315" Sporting Rifle

AS PER DRG.NO.29P 0013* (M) required for 0.315" Sporting Rifle

29P 0013*(M)

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

INVESTMENT CASTING TO TEND DRG. No.2310, FOR BAND BACK SIGHT OF 0.315" SPORTING RIFLE (29P00005*)

AS PER TEND DRG. No.2310, FOR BAND BACK SIGHT OF 0.315" SPORTING RIFLE (29P00005*)

TEND DRG. No.2310

GUARD TRIGGER INVESTMENT CASTING TO DRG.NO.RFI.SK-4312*12 required for 0.315" Sporting Rifle

AS PER DRG.NO.RFI.SK-4312*12 required for 0.315" Sporting Rifle

RFI.SK-4312*12

RFI/SK/7470 FOR 0.315 SPORTING RIFLE

RFI/SK/7470 FOR 0.315 SPORTING RIFLE

BOLT BREECH FORGING TO DRG NO,TEND 1818*(MODIFIED) required for 0.315" Sporting Rifle

AS PER DRG NO,TEND 1818*(MODIFIED) required for 0.315" Sporting Rifle

TEND 1818*(MODIFIED)

PIN STOP BOLT LOCKING TO DRG.NO.: 29P 0048* required for 0.315" Sporting Rifle

DRG.NO.: 29P 0048* required for 0.315" Sporting Rifle

29P 0048*

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

SCREW PLATE BUTT TO DRG.NO. 29P 0059* required for 0.315" Sporting Rifle

AS PER DRG.NO. 29P 0059* required for 0.315" Sporting Rifle

29P 0059*

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

PIN FIXING BAND BACK SIGHT TO DRG.No.: 29P 0006 required for 0.315" Sporting Rifle

AS PER DRG.No.: 29P 0006 required for 0.315" Sporting Rifle

29P 0006

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

CAP SLING TO DRG NO.: 29P 0044* required for 0.315" Sporting Rifle

AS PER DRG NO.: 29P 0044* required for 0.315" Sporting Rifle

29P 0044*

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

SCREW BAND INNER TO DRG. NO.29P 0051* required for 0.315" Sporting Rifle

AS PER DRG. NO.29P 0051* required for 0.315" Sporting Rifle

.29P 0051*

SWIVEL SLING REAR TO DRG.NO.: 29P 0065* required for 0.315" Sporting Rifle

AS PER DRG.NO.: 29P 0065* required for 0.315" Sporting Rifle

29P 0065*

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

SPRING MAIN TO DRG. No.: 29P 0015 required for 0.315" Sporting Rifle

AS PER DRG. No.: 29P 0015 required for 0.315" Sporting Rifle

29P 0015

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

SPRING LEAF BED BACK SIGHT TO DRG. NO.29P 0008 required for 0.315" Sporting Rifle

AS PER DRG. NO.29P 0008 required for 0.315" Sporting Rifle

29P 0008

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

TRIGGER TO DRG.NO.: 29P 0040* required for 0.315" Sporting Rifle

AS PER DRG.NO.: 29P 0040* required for 0.315" Sporting Rifle

29P 0040*

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

BLADE FORE SIGHT 29P 0004* required for 0.315" Sporting Rifle

AS PER DRG. No.29P 0004* required for 0.315" Sporting Rifle

29P 0004*

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE