MFG & SUPPLY OF PIN LEAF TO D.S. CAT NO.5315-001767 DC NO.22647-SA DATED 20.08.1994 REQD IN WHITE FINISHED CONDITION (ICR 1329)

AS PER D.S. CAT NO.5315-001767 DC NO.22647-SA DATED 20.08.1994 REQD IN WHITE FINISHED CONDITION (ICR 1329)

D.S. CAT NO.5315-001767 DC NO.22647-SA DATED 20.08.1994 REQD IN WHITE FINISHED CONDITION (ICR 1329)

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

SUPPLY OF PIN AXIS HAMMER TO DS. CAT NO. 5315-009115 DC NO.25060-SA DT. 05/07/2001 REQUIRED IN WHITE FINISHED CONDITION . FOR DC NO. LATTEST ISSUE TO BE FOLLOWED. (WITH FIRMS MATER

AS PER DS. CAT NO. 5315-009115 DC NO.25060-SA DT. 05/07/2001 REQUIRED IN WHITE FINISHED CONDITION

DS. CAT NO. 5315-009115 DC NO.25060-SA DT. 05/07/2001 REQUIRED IN WHITE FINISHED CONDITION

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

SEAR SAFETY (ICR-1281) D.S. CAT No.:1005-001697, D.C.No.22816-SA DATED:20.01.1995 (ICR-1281)

AS PER DRAWING

ICR-1281

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

SCREW HAND GUARD TO D.S.CAT. NO. 5305-005008 DC NO.24312-SA DATED 03-04-99 (ICR-1196) LATEST ISSUE SHOULD BE FOLLOWED.

AS PERD.S.CAT. NO. 5305-005008 DC NO.24312-SA DATED 03-04-99 (ICR-1196) LATEST ISSUE SHOULD BE FOLLOWED.

(ICR 1196) D.S.CAT. NO. 5305-005008 DC NO.24312-SA

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

SCREW LOCKING HINGE PIN D.S.CAT.No.: 5305-018166, D.C.No.:24629-SA, DATED:02/02/2000 FOR D.C.No. LATEST ISSUE TO BE FOLLOWED.

AS PER D.S.CAT.No.: 5305-018166, D.C.No.:24629-SA, DATED:02/02/2000 FOR D.C.No. LATEST ISSUE TO BE FOLLOWED.

(ICR-1195) D.S.CAT.No.: 5305-018166, D.C.No.:24629-SA, DATED:02/02/2000

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

SUPPLY OF BAYONET 2A WITH SCABBARD BAYONET 1A.TO DS.CAT.NO. 1005-001719 DC.NO.25340-SA,DT.25.04.02&DS.CAT.NO.1095-000207 D.C No.26302-SA Dt.05.03.2007 FOR DC NO.& SPECN. LATEST ISSUE TO BE FOLLOWED

AS PER DRG DS.CAT.NO. 1005-001719 DC.NO.25340-SA,DT.25.04.02&DS.CAT.NO.1095-000207 D.C No.26302-SA Dt.05.03.2007 FOR DC NO.& SPECN. LATEST ISSUE TO BE FOLLOWED

1005-001719 DC.NO.25340-SA,DT.25.04.02&DS.CAT.NO.1095-000207 D.C No.26302-SA Dt.05.03.2007 FOR DC NO.& SPECN. LATEST ISSUE TO BE FOLLOWED

BLANK FIRING ATTACHMENT 7.62 MM 1A. DS CAT NO. 1005-002050, DC NO. 16026-SA DT.10-7-79. FOR DC.No. LATTEST ISSUE TO BE FOLLOWED.

AS PER DS CAT NO. 1005-002050, DC NO. 16026-SA DT.10-7-79. FOR DC.No. LATTEST ISSUE TO BE FOLLOWED.

DS CAT NO. 1005-002050, DC NO. 16026-SA DT.10-7-79. FOR DC.No. LATTEST ISSUE TO BE FOLLOWED

HDPE GRADE B52A003 (GAIL)/W43006(RELIANCE)/54GB012(IPCL) TO SPECN. CQAL/534.

HDPE GRADE B52A003 (GAIL)/W43006(RELIANCE)/54GB012(IPCL) TO SPECN. CQAL/534.

HEATED PRISM TO DRG NO ATS5935132

HEATED PRISM TO DRG NO ATS5935132

ATS5935132

HEATED PRISM TO DRG. NO. ATS5935080

HEATED PRISM TO DRG. NO. ATS5935080

ATS5935080

CARTG. ELECTRIC OPERATING FIRE EXTINGUISHER 3 PIN NO.3 MK-3 (EMPTY ASSY) TO DRG.NO.TRD-3-2-1881 AND SPECN.NO. ARDE/SPECN/290.

CARTG. ELECTRIC OPERATING FIRE EXTINGUISHER 3 PIN NO.3 MK-3 (EMPTY ASSY) TO DRG.NO.TRD-3-2-1881 AND SPECN.NO. ARDE/SPECN/290.

CARTG. ELECTRIC OPERATING FIRE EXTINGUISHER 3 PIN NO.3 MK-3 (EMPTY ASSY) TO DRG.NO.TRD-3-2-1881 AND SPECN.NO. ARDE/SPECN/290.

3-PIN NO-1 MK-3 CARTG. ELECTRIC OPERATING FIRE EXTINGUSHER (EMPTY ASSEMBLY) TO DRG NO.TRD-3-2-1877 AND SPECN.NO.ARDE/SPECN/264.

3-PIN NO-1 MK-3 CARTG. ELECTRIC OPERATING FIRE EXTINGUSHER (EMPTY ASSEMBLY) TO DRG NO.TRD-3-2-1877 AND SPECN.NO.ARDE/SPECN/264.

3-PIN NO-1 MK-3 CARTG. ELECTRIC OPERATING FIRE EXTINGUSHER (EMPTY ASSEMBLY) TO DRG NO.TRD-3-2-1877 AND SPECN.NO.ARDE/SPECN/264.

CARTG.ELECTRIC OPERATING FIRE EXTENGUISHER 2PIN NO.1MK-3 (EMPTY ASSY) TO DRG.NO.TRD-3-1-2135.AND SPECN.NO. ARDE/SPCEN/124.FOR AIR FORCE WITH ECCENTIRICITY 0.55MM (INCLUSIVE EMPTY & FILLED PROOF).

CARTG.ELECTRIC OPERATING FIRE EXTENGUISHER 2PIN NO.1MK-3 (EMPTY ASSY) TO DRG.NO.TRD-3-1-2135.AND SPECN.NO. ARDE/SPCEN/124.FOR AIR FORCE WITH ECCENTIRICITY 0.55MM (INCLUSIVE EMPTY & FILLED PROOF).

CARTG.ELECTRIC OPERATING FIRE EXTENGUISHER 2PIN NO.1MK-3 (EMPTY ASSY) TO DRG.NO.TRD-3-1-2135.AND SPECN.NO. ARDE/SPCEN/124.FOR AIR FORCE WITH ECCENTIRICITY 0.55MM (INCLUSIVE EMPTY & FILLED PROOF).

CARTG CASE EMPTY TO DRG NO.6018-10-00-01 (7 SHEET)SHEET NO.1DC-36909-A DT.5-7-03 AND SHEET NO.2 DC NO.33817-A DT.10-9-85SHEET NO.3 DC NO.37073-A DT.29-9-06 AND SHEET NO.4 T0 SHEETNO.6 DC NO.33817-A DT.10-9-85 AND SHEET NO.7 DC NO.35587-ADT.20-9-93.

CARTG CASE EMPTY TO DRG NO.6018-10-00-01 (7 SHEET)SHEET NO.1DC-36909-A DT.5-7-03 AND SHEET NO.2 DC NO.33817-A DT.10-9-85SHEET NO.3 DC NO.37073-A DT.29-9-06 AND SHEET NO.4 T0 SHEETNO.6 DC NO.33817-A DT.10-9-85 AND SHEET NO.7 DC NO.35587-ADT.20-9-93.

CARTG CASE EMPTY TO DRG NO.6018-10-00-01 (7 SHEET)SHEET NO.1DC-36909-A DT.5-7-03 AND SHEET NO.2 DC NO.33817-A DT.10-9-85SHEET NO.3 DC NO.37073-A DT.29-9-06 AND SHEET NO.4 T0 SHEETNO.6 DC NO.33817-A DT.10-9-85 AND SHEET NO.7 DC NO.35587-ADT.20-9-93.

BORON POWDER, GRADE-I WITH PURITY Min.95%, SIZE 0.8 TO 0.9 MICRONS TO SPECN:-IND/ME/980(PROV) DC NO. 3844-MEDT.04/04/2005.

BORON POWDER, GRADE-I WITH PURITY Min.95%, SIZE 0.8 TO 0.9 MICRONS TO SPECN:-IND/ME/980(PROV) DC NO. 3844-MEDT.04/04/2005.

BORON POWDER, GRADE-I WITH PURITY Min.95%, SIZE 0.8 TO 0.9 MICRONS TO SPECN:-IND/ME/980(PROV) DC NO. 3844-MEDT.04/04/2005.

ADOPTER SCREW TO DRG.NO.MMG-H/MK-1/051/RO.

ADOPTER SCREW TO DRG.NO.MMG-H/MK-1/051/RO.

ADOPTER SCREW TO DRG.NO.MMG-H/MK-1/051/RO.

• attached

• attached

CAN, OIL MG MK3 DS CAT NO. 4930-000800, 1005-000336 TO 1005-000338 & 5310-002657, DC NO. 23500-SA DT.20-9-96

AS PER DS CAT NO. 4930-000800, 1005-000336 TO 1005-000338 & 5310-002657, DC NO. 23500-SA DT.20-9-96

DS CAT NO. 4930-000800, 1005-000336 TO 1005-000338 & 5310-002657, DC NO. 23500-SA DT.20-9-96

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

LV6/MT7-3110-002686 BALL BEARING DIA. 3.175mm TOIS: 2898, 1976 GRADE 5.MATL: IS 4398-1972. (FOR ICR 72SA)

LV6/MT7-3110-002686 BALL BEARING DIA. 3.175mm TOIS: 2898, 1976 GRADE 5.MATL: IS 4398-1972. (FOR ICR 72SA)

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

PIN KEEP SPLIT 1/16" GI 5315- 000053(DIA 1.59mm X19.05mm LONG)IS:549 : 2005.

AS PER DRAWING

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

WASHER SPRING SINGLE COIL TYPE B STEEL ZINC PLATED (NOMINAL SIZE)6MM CAT/PT.NO.G1/5310-001434 SPECN.IS:3063:1972 & SS NO.CIGS/SS/173(D).THICKNESS OF ZINC PLATING TO IS 1573-1970 SERVICE CONDN.NO.1(GR.FE ZN 5)CHROMEPASSIVATED

AS PER DRG

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

NBC ANTI RADIATION PADS

NBC ANTI RADIATION PADS

HEAD FOR FUZE MINE COMB. M-605 EMPTY TO DRG. NO. IQX-310 IN F/C DC. NO. 36997-A DT. 25.01.2005

AS PER DRG.

PLUG TO DRG. NO. IQX-313 FOR FUZE MINE COMBINATION (F/C)

AS PER SPECIFICATIONS

IQX-313

HEAD FLASH IGNITER TO DRG. NO. IQX-306 IN F/C FOR FMC DC. NO. 35573-A DT. 02.09.93

AS PER DRAWING

IQX-306

HEAD SAFETY FOR FMC M-605 EMPTY TO DRG NO. IQX-311 IN F/C DC. NO.35828-A dt. 18.10.94

AS PER DRAWING

IQX-311

TRIGGER TO DRG. NO. IQX-316 IN F/C FOR FMC M-605 DC NO. 36997-A DT. 25.01.2005

AS PER DRAWING

IQX-316

• AS PER ATTACHMENT

• AS PER ATTACHMENT

BOAT TAIL ANODISING FROM TRADE OF BOAT TAIL MACHINED TO DRG.NO. 155-1150

BOAT TAIL ANODISING FROM TRADE OF BOAT TAIL MACHINED TO DRG.NO. 155-1150

DRG.NO. 155-1150

AS PER DRG. NO- SK-8345/C

AS PER DRG. NO- SK-8345/C

AS PER DRG. NO- SK-9043

AS PER DRG. NO- SK-9043

ISX-315 DESIGNERS REF NO.CIA/AMN/2171 DC NO.37347-A DT.29.10.13.

ISX-315 DESIGNERS REF NO.CIA/AMN/2171 DC NO.37347-A DT.29.10.13.

DESIGNERS REF.NO:04-13-2452-148.(REF.OFBL DRG.NO:BL/PB/U-5/343).

DESIGNERS REF.NO:04-13-2452-148.(REF.OFBL DRG.NO:BL/PB/U-5/343).

AS PER DRG NO.NASK1072

AS PER DRG NO.NASK1072

AS PER DRG.

AS PER DRG.

AS PER DRG.

AS PER DRG.

AS PER DRG.

AS PER DRG.

AS PER DRG.

AS PER DRG.

172.35.027-1

172.35.027-1

AS PER DRG

AS PER DRG

CARTON BOX FOR LTPE CARTRIDGE TO HOLD 25 CARTRIGES 100 G EACH,EMPTY LONG FLAPS AS PER DRG.NO. OFBA/PE/11,THICKNESS OF CARTON BOARD 0.889 MM PLUS/MINUS 0.089 MM.

CARTON BOX FOR LTPE CARTRIDGE TO HOLD 25 CARTRIGES 100 G EACH,EMPTY LONG FLAPS AS PER DRG.NO. OFBA/PE/11,THICKNESS OF CARTON BOARD 0.889 MM PLUS/MINUS 0.089 MM.

DRG.NO. OFBA/PE/11,THICKNESS OF CARTON BOARD 0.889 MM PLUS/MINUS 0.089 MM.

• MSME

• CARTON BOX FOR LTPE CARTRIDGE TO HOLD 25 CARTRIGES 100 G EACH,EMPTY LONG FLAPS AS PER DRG.NO. OFBA/PE/11,THICKNESS OF CARTON BOARD 0.889 MM PLUS/MINUS 0.089 MM.

1) 172.40.364 /F 2) 172.40.365 /F

1) 172.40.364 /F 2) 172.40.365 /F

172.51.021

172.51.021

6CH16CBCB

6CH16CBCB

AS PER DRG NO.H OMA 120 1 054. 2

AS PER DRG NO.H OMA 120 1 054. 2

AS PER HAPP DRG NO.C ROC 060 1 151 0

AS PER HAPP DRG NO.C ROC 060 1 151 0

AS PER HAPP DRG NO OADF 155 2010 REV.8

AS PER HAPP DRG NO OADF 155 2010 REV.8

175-47-027/F

175-47-027/F

AS PER HAPP DRG NO OADF 155 2010 REV.8

AS PER HAPP DRG NO OADF 155 2010 REV.8

IS 517:1986 REAFF 1996

IS 517:1986 REAFF 1996

HEF/IO/65 DATED 21.12.95

HEF/IO/65 DATED 21.12.95

IS 247:1987 REAFF 2010 IVTH REV

IS 247:1987 REAFF 2010 IVTH REV

GOST: 4543-71

GOST: 4543-71

GOST: 4543-71

GOST: 4543-71

CQA(HV)5.51.002

CQA(HV)5.51.002

CQA(HV)5.45.001

CQA(HV)5.45.001

1) 172.04.415-1 2) 172.04.442-1 3) 172.04.444-1 4) 172.04.451-1 5) 172.04.483-B

1) 172.04.415-1 2) 172.04.442-1 3) 172.04.444-1 4) 172.04.451-1 5) 172.04.483-B

Shield/172.04.451-2 ,Shield/172.04.421-1

Shield/172.04.451-2 ,Shield/172.04.421-1

AS PER HAPP DRG NO OADF 155 2010 REV.8

AS PER HAPP DRG NO OADF 155 2010 REV.8

ETHYL CELLULOSE HIGH VISCOSITY TYPE N-200 CONFORMING TO SPCN CS-2724.THE MATERIAL WILL BE ACCEPTED AFTER TRIAL EXTRUSION OF SMOOTH AND TRANSPARENT E.C.SLEEVES WITHOUT ANY WRINKLES AND UNMOLTEN PARTICLES AND FREE FROM FOREIGN MATTER AND MEETING MECHANICAL PROPERTIES.

ETHYL CELLULOSE HIGH VISCOSITY TYPE N-200 CONFORMING TO SPCN CS-2724.THE MATERIAL WILL BE ACCEPTED AFTER TRIAL EXTRUSION OF SMOOTH AND TRANSPARENT E.C.SLEEVES WITHOUT ANY WRINKLES AND UNMOLTEN PARTICLES AND FREE FROM FOREIGN MATTER AND MEETING MECHANICAL PROPERTIES.

• MSME

• MSME

JSS: 9160-05 2016, Revision No.-3.

JSS: 9160-05 2016, Revision No.-3.

• MSME

• JSS: 9160-05 2016, Revision No.-3.

DRG NO,175-47-014A

DRG NO,175-47-014A

AS PER DRG.

AS PER DRG.

AS PER DRG.

AS PER DRG.

AS PER DRG.

AS PER DRG.

AS PER DRG.

AS PER DRG.

AS PER DRG.

AS PER DRG.

AS PER DRG.

AS PER DRG.

AS PER DRG.

AS PER DRG.

AS PER DRG.

AS PER DRG.

AS PER DRG.

AS PER DRG.

AS PER DRG.

AS PER DRG.

AS PER DRG.

AS PER DRG.

AS PER DRG.

AS PER DRG.

AS PER DRG.

AS PER DRG.

AS PER DRG.

AS PER DRG.

AS PER DRG.

AS PER DRG.

AS PER DRG.

AS PER DRG.

AS PER DRG.

AS PER DRG.

AS PER DRG.

AS PER DRG.

AS PER DRG.

AS PER DRG.

AS PER DRG.

AS PER DRG.