7201
T.E. NO.190245FHPO
Gun Carriage Factory
The General Manager,
Jabalpur
Jabalpur
Jabalpur,Madhya Pradesh
482011
Name
Code
Quantity
Approx Value
Select
CASTOR WHEEL ASSY TO PART NO.1132630
Description
CASTOR WHEEL ASSY TO PART NO.1132630
Specification
CASTOR WHEEL ASSY TO PART NO.1132630
Testing / Inspection Facility
90
17
Number
7202
190129P9FO
Gun Carriage Factory
The General Manager,
Jabalpur
Jabalpur
Jabalpur,Madhya Pradesh
482011
Name
Code
Quantity
Approx Value
Select
CASE INSTRUMENT STAND 2A CLEANING ROD 3A V5 1240 000336
Description
CASE INSTRUMENT STAND 2A & CLEANING ROD 3A,V5/1240-000336.
Specification
CASE INSTRUMENT STAND 2A & CLEANING ROD 3A,V5/1240-000336.
Testing / Inspection Facility
90
191
Number
7203
190131P9FO
Gun Carriage Factory
The General Manager,
Jabalpur
Jabalpur
Jabalpur,Madhya Pradesh
482011
7204
OCFAV HDPE
Ordnance Clothing Factory Avadi
The General Manager,
Avadi
Avadi
Avadi, Tamil Nadu
600054
Name
Code
Quantity
Approx Value
Select
HDPE Dot coated Printed Fusible Interlining Fabric 150 cm as per OCFA Specification
Description
HDPE Dot coated Printed Fusible Interlining Fabric 150 cm
Specification
1) Raw Material : 100% Cotton
2) Count (Warp & Weft) : 30s
3) Ends per Inch : 76+/- 5
4) Picks per Inch : 76 +/- 5
5) Width : 150 cm (Min)
6) Weave : Plain
7) Coating : HDPE
8) Colour : White
9) GSM : 148 +5/-2.5%
10) Shrinkage % : As per Appendix A of IND/TC/2089(a)
11) Bond Strength (Kgs) : > 2.0 As per IND/TC/2089(a)
12) Packing & Marking : As per CQA(T&C) Kanpur Schedule No. CQA(T&C)/PMS/35(d). Except that :
a. Fabric in roll form shall not be less than 40 Mtrs in running length without stitching/ basting in between.
b. Roll weight shall not exceed 50 kgs.
c. Each roll of fabric shall be wrapped separately with polypropylene plain sheet. final packing of 2 rolls in one W.P Gunny/HDPE sheet.
d. Dimension for paper tubes of fabric roll: Outer Diameter-3.5 cm, Inner Diameter-2.5 cm Thickness-0.5 cm.
e. Fabric selvedges shall be wound evenly at one edge.
13) Sampling plan : As per annexure.
Drawing no.
Sampling Plan attached as Drawing file
Testing / Inspection Facility
21
31040
Metre
7205
O072-19
Ordnance Factory Dehradun
The General Manager,
Dehra Dun
Dehra Dun
Uttaranchal
248008
Name
Code
Quantity
Approx Value
Select
THERMISTOR AB4681025 028 TY
Description
THERMISTOR AB4681025/028 TY
Specification
THERMISTOR AB4681025/028 TY
Testing / Inspection Facility
15
1179
Number
7206
2019000074
Ordnance Clothing Factory Shahjahanpur
The General Manager,
Shahjahanpur
Shahjahanpur
Shahjahanpur, Uttar Pradesh
242001
Name
Code
Quantity
Approx Value
Select
Fabrication of Overall Combination Disruptive Pattern with Indian Army Logo
Description
Fabrication of Overall Combination Disruptive Pattern with Indian Army Logo
Provisional Specification No. S/2764/OC Army Logo/TC-15 As per relevant clause of specification.
Specification
Fabrication of Overall Combination Disruptive Pattern with Indian Army Logo
Provisional Specification No. S/2764/OC Army Logo/TC-15 As per relevant clause of specification.
Manufacturing Technology
as per attached list (Manufacturing Technology Files )
Testing / Inspection Facility
as per attached list (Testing / Inspection Facility Files )
21
33000
Whole job
7207
2019000073
Ordnance Clothing Factory Shahjahanpur
The General Manager,
Shahjahanpur
Shahjahanpur
Shahjahanpur, Uttar Pradesh
242001
Name
Code
Quantity
Approx Value
Select
Fabrication of coat Extreme Cold Climate
Description
IND/TC/4587 (d) & Approved samples
Specification
IND/TC/4587 (d) & Approved samples
Testing / Inspection Facility
21
9330
Whole job
7208
107MMETT19002833
Gun and Shell Factory
The General Manager,
Cossipore
Cossipore
Cossipore West Bengal
700002
7209
OLF/MM-2/T-1906010154
Opto Electronic Factory
Dehradun
Dehradun
Dehradun
Dehradun, Uttaranchal
248008
Name
Code
Quantity
Approx Value
Select
JOURNAL LF NO 9927094274
Description
JOURNAL LF NO 9927094274
Specification
JOURNAL LF NO 9927094274
Drawing no.
T-02/IC/8216003/122 M1
Testing / Inspection Facility
99
40
Number
INV CASTING PRECISECAST LF NO 9927091584
Description
INV CASTING PRECISECAST LF NO 9927091584
Specification
INV CASTING PRECISECAST LF NO 9927091584
Drawing no.
T-02/IC/8100000/046 M1
Testing / Inspection Facility
99
213
Number
INV CASTING HANDLE LF NO 9927091564
Description
INV CASTING HANDLE LF NO 9927091564
Specification
INV CASTING HANDLE LF NO 9927091564
Drawing no.
T-02/IC/8333020/038
Testing / Inspection Facility
99
30
Number
INV CASTING SHACKLE LF NO 9927090643
Description
INV CASTING SHACKLE LF NO 9927090643
Specification
INV CASTING SHACKLE LF NO 9927090643
Drawing no.
B-21/IC/8669091/116 M1
Testing / Inspection Facility
99
261
Number
INV CASTING HOLDER LF NO 9927090641
Description
INV CASTING HOLDER LF NO 9927090641
Specification
INV CASTING HOLDER LF NO 9927090641
Drawing no.
B-21/IC/8637886/113 M2
Testing / Inspection Facility
99
98
Number
COVER PLATE LF NO 9927084511
Description
COVER PLATE LF NO 9927084511
Specification
COVER PLATE LF NO 9927084511
Drawing no.
T-02/IC/8604009/042 M1
Testing / Inspection Facility
99
92
Number
INV CASTING PRECISE CAS LF NO 9927075122
Description
INV CASTING PRECISE CAS LF NO 9927075122
Specification
INV CASTING PRECISE CAS LF NO 9927075122
Drawing no.
T-02/IC/7027007/033 M1
Testing / Inspection Facility
99
103
Number
TOOTHED QUADRANT LF NO 9927071797
Description
TOOTHED QUADRANT LF NO 9927071797
Specification
TOOTHED QUADRANT LF NO 9927071797
Drawing no.
B-21/IC/8483011/140 M1
Testing / Inspection Facility
99
19
Number
INV CASTING BODY LF NO 9927071776
Description
INV CASTING BODY LF NO 9927071776
Specification
INV CASTING BODY LF NO 9927071776
Drawing no.
B-21/IC/8020457/093 M1
Testing / Inspection Facility
99
46
Number
INV CASTING BODY LF NO 9927070135
Description
INV CASTING BODY LF NO 9927070135
Specification
INV CASTING BODY LF NO 9927070135
Drawing no.
T-02/IC/8020050/052 M1
Testing / Inspection Facility
99
193
Number
INV CASTING BODY LF NO 9927069257
Physical Verification needed
Description
INV CASTING BODY LF NO 9927069257
Specification
INV CASTING BODY LF NO 9927069257
Drawing no.
T-02/IC/8020051/053 M1
Testing / Inspection Facility
99
372
Number
CASSING LF NO 9927069030
Description
CASSING LF NO 9927069030
Specification
CASSING LF NO 9927069030
Drawing no.
T-01/IC/8665341/189 M1
Testing / Inspection Facility
99
121
Number
INV CASTING HOLDER LF NO 9927069029
Description
INV CASTING HOLDER LF NO 9927069029
Specification
INV CASTING HOLDER LF NO 9927069029
Drawing no.
T-01/IC/8665262/188 M1
Testing / Inspection Facility
99
40
Number
INV CASTING CAM LF NO 9927068918
Description
INV CASTING CAM LF NO 9927068918
Specification
INV CASTING CAM LF NO 9927068918
Drawing no.
T-01/IC/8360133/168 M2
Testing / Inspection Facility
99
170
Number
INV CASTING HANDLE LF NO 9927068879
Description
INV CASTING HANDLE LF NO 9927068879
Specification
INV CASTING HANDLE LF NO 9927068879
Drawing no.
T-01/IC/8333162/175 M1
Testing / Inspection Facility
99
299
Number
INV CASTING FOR HOUSING LF NO 9927068812
Description
INV CASTING FOR HOUSING LF NO 9927068812
Specification
INV CASTING FOR HOUSING LF NO 9927068812
Drawing no.
T-01/IC/8212077/90 M1
Testing / Inspection Facility
99
81
Number
INV CASTING LEVER LF NO 9927068617
Description
INV CASTING LEVER LF NO 9927068617
Specification
INV CASTING LEVER LF NO 9927068617
Drawing no.
T-01/IC/8332861/167 M1
Testing / Inspection Facility
99
76
Number
INV CASTING LEVER LF NO 9927068613
Description
INV CASTING LEVER LF NO 9927068613
Specification
INV CASTING LEVER LF NO 9927068613
Drawing no.
T-01/IC/8332834/128 M1
Testing / Inspection Facility
99
110
Number
INV CASTING LEVER LF NO 9927068611
Description
INV CASTING LEVER LF NO 9927068611
Specification
INV CASTING LEVER LF NO 9927068611
Drawing no.
T-01/IC/8332832/125
Testing / Inspection Facility
99
22
Number
INV CASTING SECTOR GEAR LF NO 9927068607
Description
INV CASTING SECTOR GEAR LF NO 9927068607
Specification
INV CASTING SECTOR GEAR LF NO 9927068607
Drawing no.
T-01/IC/8483069/152 M3
Testing / Inspection Facility
99
60
Number
HANDLE CASTING LF NO 7526030300
Physical Verification needed
Description
HANDLE CASTING LF NO 7526030300
Specification
HANDLE CASTING LF NO 7526030300
Testing / Inspection Facility
75
62
Number
LEVER CASTING LF NO 7525140500
Description
LEVER CASTING LF NO 7525140500
Specification
LEVER CASTING LF NO 7525140500
Drawing no.
IC/ /510206/405
Testing / Inspection Facility
75
14
Number
INV CASTING INSERT LF NO 7522113100
Description
INV CASTING INSERT LF NO 7522113100
Specification
INV CASTING INSERT LF NO 7522113100
Drawing no.
B-21/IC/8214013/131
Testing / Inspection Facility
75
33
Number
INV CASTING FOR BODY LF NO 7522111700
Description
INV CASTING FOR BODY LF NO 7522111700
Specification
INV CASTING FOR BODY LF NO 7522111700
Drawing no.
B-21/IC/8020454/117 M1
Testing / Inspection Facility
75
30
Number
INV CASTING CLAMP LF NO 7522111500
Description
INV CASTING CLAMP LF NO 7522111500
Specification
INV CASTING CLAMP LF NO 7522111500
Drawing no.
B-21/IC/8667787/115 M1
Testing / Inspection Facility
75
157
Number
BODY CASTING SC/52/651 (LF 7515230400)
Description
BODY CASTING SC/52/651 (LF 7515230400)
Specification
BODY CASTING SC/52/651 (LF 7515230400)
Testing / Inspection Facility
75
97
Number
7210
STLTR/01
Vehicle Factory Jabalpur
The Sr.General Manager,
Jabalpore
Jabalpore
Madhya Pradesh
482009
Name
Code
Quantity
Approx Value
Select
FORG FOR OD GEAR ON MAIN SHAFT
Description
FORGING FOR OD GEAR ON MAIN SHAFT, STLN-BS-III, PART NO. F1609911, DRG.NO.F8A04711-3
Specification
FORGING FOR OD GEAR ON MAIN SHAFT, STLN-BS-III, PART NO. F1609911, DRG.NO.F8A04711-3
Drawing no.
DRG.NO.F8A04711-3
Testing / Inspection Facility
90
150
Number
FORG FOR 3rd GEAR ON MAIN SHAFT
Description
FORGING FOR 3rd GEAR ON MAIN SHAFT, STLN- BS-III, PART NO. F1668811-3
Specification
FORGING FOR 3rd GEAR ON MAIN SHAFT, STLN- BS-III, PART NO. F1668811-3
Drawing no.
DRG. NO. F1668811-3
Testing / Inspection Facility
90
150
Number
FORG FOR 4th GEAR ON MAIN SHAFT
Description
FORG.FOR 4th GEAR ON MAIN SHAFT, STLN- BS-III,PART NO./DRG.NO.F1668911-3
Specification
FORG.FOR 4th GEAR ON MAIN SHAFT, STLN- BS-III,PART NO./DRG.NO.F1668911-3
Drawing no.
DRG.NO.F1668911-3
Testing / Inspection Facility
90
150
Number
FORG FOR 2nd GEAR ON MAIN SHAFT
Description
FORGING FOR 2nd GEAR ON MAIN SHAFT, STLN- BS-III, PART NO. F1609711-3
Specification
FORGING FOR 2nd GEAR ON MAIN SHAFT, STLN- BS-III, PART NO. F1609711-3
Drawing no.
DRG. NO. F1609711-3
Testing / Inspection Facility
90
150
Number
FORG FOR REVERSE IDLER GEAR BS 3
Description
FORG FOR REVERSE IDLER GEAR , STLN- BS-III, PT. NO. F8A02611-3
Specification
FORG FOR REVERSE IDLER GEAR , STLN- BS-III, PT. NO. F8A02611-3
Drawing no.
DRG. NO. F8A02611-3
Testing / Inspection Facility
90
150
Number
FORG FOR OUTPUT FLANGE BS 3
Description
FORG FOR OUT PUT FLANGE, STLN- BS-III, PT. NO. F1402311-3
Specification
FORG FOR OUT PUT FLANGE, STLN- BS-III, PT. NO. F1402311-3
Drawing no.
DRG. NO. F1402311-3
Testing / Inspection Facility
90
150
Number
FORG FOR SLEEVE STLN BS III F3424215 3 R1
Description
FORG. FOR SLEEVE. STLN- BS-III ,PART NO. F3424215-3(R1)
Specification
FORG. FOR SLEEVE. STLN- BS-III ,PART NO. F3424215-3(R1)
Drawing no.
DRG. NO. F3424215-3(R1)
Testing / Inspection Facility
90
150
Number
FORG FOR SLEEVE STLN BS III F3427015 3 R1
Description
FORG. FOR SLEEVE, STLN- BS-III, PART NO. F3427015-3(R1) ON 4th GR.M/S
Specification
FORG. FOR SLEEVE, STLN- BS-III, PART NO. F3427015-3(R1) ON 4th GR.M/S
Drawing no.
DRG. NO. F3427015-3(R1)
Testing / Inspection Facility
90
150
Number
FORG FOR MAIN SHAFT STLN BS 3
Description
FORGING FOR MAIN SHAFT STLN- BS-III, DRG. NO. F3318711-3
Specification
FORGING FOR MAIN SHAFT STLN- BS-III, DRG. NO. F3318711-3
Drawing no.
DRG. NO. F3318711-3
Testing / Inspection Facility
90
150
Number
FORG FOR CONSTANT MESH GEAR LAY SHAFT
Description
FORGING FOR(CONST.MESH GEAR) HELICAL GEAR LAY SHAFT, STLN-BS-III, PT. NO. F 1668511-3
Specification
FORGING FOR(CONST.MESH GEAR) HELICAL GEAR LAY SHAFT, STLN-BS-III, PT. NO. F 1668511-3
Drawing no.
DRG. NO. F 1668511-3
Testing / Inspection Facility
90
150
Number
FORG FOR 5th GEAR ON LAY SHAFT
Description
FORGING FOR(5th GEAR ON LAY SHAFT) HELICAL GEAR STLN -BS-III, PART NO. F 1668711-3
Specification
FORGING FOR(5th GEAR ON LAY SHAFT) HELICAL GEAR STLN -BS-III, PART NO. F 1668711-3
Drawing no.
DRG. NO. F 1668711-3
Testing / Inspection Facility
90
150
Number
FORG FOR 3rd GEAR ON LAY SHAFT
Description
FORG.FOR 3rd GEAR ON LAY SHAFT, STLN-BS-III, PART NO. F1668611-3
Specification
FORG.FOR 3rd GEAR ON LAY SHAFT, STLN-BS-III, PART NO. F1668611-3
Drawing no.
DRG. NO. F1668611-3
Testing / Inspection Facility
90
150
Number
FORG FOR 4th GEAR ON LAY SHAFT
Description
FORG.FOR 4th GEAR ON LAY SHAFT, STLN- BS-III, PART NO. F1607211-3
Specification
FORG.FOR 4th GEAR ON LAY SHAFT, STLN- BS-III, PART NO. F1607211-3
Drawing no.
DRG. NO. F1607211-3
Testing / Inspection Facility
90
150
Number
FORG FOR RING FOR OIL SEAL OUTER
Description
FORGING FOR RING FOR OIL SEAL OUTER, DRG. No. F 0741011 -3
Specification
FORGING FOR RING FOR OIL SEAL OUTER, DRG. No. F 0741011 -3
Drawing no.
DRG. No. F 0741011 -3
Testing / Inspection Facility
90
300
Number
FORG FOR THRUST COLLAR RING
Description
FORGING FOR THRUST COLLAR/RING, DRG. No. X 3402115 -3B
Specification
FORGING FOR THRUST COLLAR/RING, DRG. No. X 3402115 -3B
Drawing no.
DRG. No. X 3402115 -3B
Testing / Inspection Facility
90
300
Number
FORG FOR DISTANCE RING
Description
FORGING FOR DISTANCE RING, DRG. NO. Z 1201311 -A
Specification
FORGING FOR DISTANCE RING, DRG. NO. Z 1201311 -A
Drawing no.
DRG. NO. Z 1201311 -A
Testing / Inspection Facility
90
300
Number
FORG FOR HUB END
Description
FORG.FOR HUB FOR STG. PIVOT, DRG. No. Z1803211- (R2)
Specification
FORG.FOR HUB FOR STG. PIVOT, DRG. No. Z1803211- (R2)
Drawing no.
DRG. No. Z1803211- (R2)
Testing / Inspection Facility
90
150
Number
FORGING FOR PIN
Description
FORGING FOR PIN, DRG. No. PS-0932111
Specification
FORGING FOR PIN, DRG. No. PS-0932111
Drawing no.
DRG. No. PS-0932111
Testing / Inspection Facility
90
600
Number
FORGING FOR NEEDLE HOUSING
Description
FORGING FOR NEEDLE HOUSING, DRG. No. D 9045415 -3A 0384F
Specification
FORGING FOR NEEDLE HOUSING, DRG. No. D 9045415 -3A 0384F
Drawing no.
DRG. No. D 9045415 -3A
Testing / Inspection Facility
90
1200
Number
FORGING FOR SELECTOR PLATE
Description
FORGING FOR SELECTOR PLATE, F-2437614-3(A)
Specification
FORGING FOR SELECTOR PLATE, F-2437614-3(A)
Drawing no.
DRG. NO. F-2437614-3(A)
Testing / Inspection Facility
90
150
Number
FORG FOR SELECTOR PLATE
Description
FORGING FOR SELECTOR PLATE, F2437514-3 (A)
Specification
FORGING FOR SELECTOR PLATE, F2437514-3 (A)
Drawing no.
DRG. NO. F2437514-3 (A)
Testing / Inspection Facility
90
150
Number
FORG FOR ACTUATER
Description
FORGING FOR ACTUATER, DRG. No. Z-1802911(R1) PART NO. X1802911
Specification
FORGING FOR ACTUATER, DRG. No. Z-1802911(R1) PART NO. X1802911
Drawing no.
DRG. NO. Z-1802911(R1)
Testing / Inspection Facility
90
300
Number
FORG FOR RING FOR OIL SEAL INNER
Description
FORGING FOR RING FOR OIL SEAL INNER, DRG. No.F 0741111-3
Specification
FORGING FOR RING FOR OIL SEAL INNER, DRG. No.F 0741111-3
Drawing no.
DRG. No.F 0741111-3
Testing / Inspection Facility
90
300
Number
FORG DRIVING FLANGE
Description
FORGING FOR DRIVING FLANGE DRG.NO. PS1433111(R1)
Specification
FORGING FOR DRIVING FLANGE DRG.NO. PS1433111(R1)
Drawing no.
DRG.NO. PS1433111(R1)
Testing / Inspection Facility
90
300
Number
FORG FOR DRIVING SHAFT
Description
FORGING FOR DRIVING SHAFT, .FXL.PT.NO. SD9056311(R2)
Specification
FORGING FOR DRIVING SHAFT, .FXL.PT.NO. SD9056311(R2)
Drawing no.
SD9056311(R2)
Testing / Inspection Facility
90
300
Number
FORG FOR SPUR GEAR GEAR INPUT LOW
Description
FORG. FOR GEAR INPUT LOW, STLN- BS-III, PT. NO. X1602411-3 (R1)
Specification
FORG. FOR GEAR INPUT LOW, STLN- BS-III, PT. NO. X1602411-3 (R1)
Drawing no.
DRG. NO. X1602411-3 (R1)
Testing / Inspection Facility
90
150
Number
FORG FOR GEAR ON LAY SHAFT GEAR LAY SHAFT
Description
FORG. FOR GEAR ON LAY SHAFT/GEAR LAY SHAFT, STLN- BS-III, PART NO. X1602611-3(R2)
Specification
FORG. FOR GEAR ON LAY SHAFT/GEAR LAY SHAFT, STLN- BS-III, PART NO. X1602611-3(R2)
Drawing no.
DRG. NO. X1602611-3(R2)
Testing / Inspection Facility
90
150
Number
FORG FOR INPUT SHAFT STLN BS 3
Description
FORG. FOR INPUT SHAFT, STLN.-BS-III, PART NO. X3303611-3(R1)
Specification
FORG. FOR INPUT SHAFT, STLN.-BS-III, PART NO. X3303611-3(R1)
Drawing no.
DRG. NO. X3303611-3(R1)
Testing / Inspection Facility
90
150
Number
FORGING FOR OUT PUT SHAFT FT
Description
FORGING FOR OUT PUT SHAFT FRONT, DRG. NO.PS3344611(R2)
Specification
FORGING FOR OUT PUT SHAFT FRONT, DRG. NO.PS3344611(R2)
Drawing no.
DRG. NO. PS3344611(R2)
Testing / Inspection Facility
90
150
Number
7211
3193000787
Small Arms Factory
The General Manager,
Kanpur
Kanpur
Kanpur, Uttar Pradesh
208009
Name
Code
Quantity
Approx Value
Select
Al FORGING FOR BODY COVER for MAG
Description
AL.FORGING FOR BODY COVER DRG.NO. SKM-174*
Specification
AL.FORGING FOR BODY COVER DRG.NO. SKM-174*
Drawing no.
AL.FORGING FOR BODY COVER DRG.NO. SKM-174*
Testing / Inspection Facility
61
236
Number
FORG FOR STEERING LEVER BS3
Description
FORG. FOR STEERING LEVER, PART NO.X3206711-3
Specification
FORG.FOR STEERING LEVER, PART NO.X3206711-3
Testing / Inspection Facility
90
150
Number
FORGING FOR HUB FRONT
Description
FORGING FOR HUB FRONT, DRG.No. Z-1803011 -(b)
Specification
FORGING FOR HUB FRONT, DRG.No. Z-1803011 -(b)
Drawing no.
DRG.No. Z-1803011 -(b)
Testing / Inspection Facility
90
300
Number
7212
110190221
Ordnance Parachute Factory
The General Manager,
Kanpur
Kanpur
Kanpur, Uttar Pradesh
208004
Name
Code
Quantity
Approx Value
Select
SOCKET FOR HARNESS FOR PSM SERIES
Description
SOCKET FOR HARNESS
Specification
DRG.NO.ADRDE/1387 (a)
Testing / Inspection Facility
2010068067
171
Number
7213
110190222
Ordnance Parachute Factory
The General Manager,
Kanpur
Kanpur
Kanpur, Uttar Pradesh
208004
Name
Code
Quantity
Approx Value
Select
YELLOW WHITE LINE RIP PIN SHEET 1 OF 8
Description
YELLOW/WHITE LINE RIP PIN. (SHEET 1 OF 8)
Specification
DRG. NO.: ADRDE/1322(b) DRD/66/98.
Manufacturing Technology
As per Specification/Drawing
Testing / Inspection Facility
As per Specification/Drawing
2110071015
141
Number
7214
OLF/MM-2/T-1906010184
Opto Electronic Factory
Dehradun
Dehradun
Dehradun
Dehradun, Uttaranchal
248008
Name
Code
Quantity
Approx Value
Select
ITO COATING ON P GLASS OF IP33 LF 9927098599
Description
ITO COATING ON PROTECTIVE GLASS AS PER DRAWING NO. Y7168653 OF IP3-3 MATERIAL WILL BE SUPPLIED BY OLF
Specification
ITO COATING ON PROTECTIVE GLASS AS PER DRAWING NO. Y7168653 OF IP3-3 MATERIAL WILL BE SUPPLIED BY OLF
Manufacturing Technology
FIRM NEEDS TO SUBMIT DETAILS OF MANUFCTURING FACILITIES FOR SUBJEC ITEM
Testing / Inspection Facility
FIRM NEEDS TO SUBMIT DETAILS OF TESTING FACILITIES FOR SUBJEC ITEM
99
500
Number
7215
OCFC/2019/CASE
Ordnance Cable Factory Chandigarh
The General Manager,
Chandigarh
Chandigarh
Chandigarh
160002
Name
Code
Quantity
Approx Value
Select
CASE CARRYING FOR RED DOT SIGHT
Description
ITEM REQUIRED FOR RED DOT SIGHT
Specification
OLF/R&D/RDS/001.07
Drawing no.
OLF/R&D/RDS/001.07OLF/R&D/RDS/001.07
Testing / Inspection Facility
77
615
Number
7216
110190220
Ordnance Parachute Factory
The General Manager,
Kanpur
Kanpur
Kanpur, Uttar Pradesh
208004
Name
Code
Quantity
Approx Value
Select
INERTIA PROOF QUICK RELEASE FITTING 4 POINT WITH CONNECTING LUG LARGE AND SMALL
Description
INERTIA PROOF QUICK RELEASE FITTING 4 POINT
QUANTITY = 01. DRAWING NO. ADRDE/209(b)
CONNECTING LUG LARGE
QUANTITY = 02. DRAWING NO. ADRDE/1305(a)
CONNECTING LUG SMALL
QUANTITY = 02. DRAWING NO. ADRDE/1365(c)
Specification
INERTIA PROOF QUICK RELEASE FITTING 4 POINT
QUANTITY = 01. DRAWING NO. ADRDE/209(b)
CONNECTING LUG LARGE
QUANTITY = 02. DRAWING NO. ADRDE/1305(a)
CONNECTING LUG SMALL
QUANTITY = 02. DRAWING NO. ADRDE/1365(c)
Testing / Inspection Facility
9911036174
72
Set
7217
190142DLFO
Gun Carriage Factory
The General Manager,
Jabalpur
Jabalpur
Jabalpur,Madhya Pradesh
482011
Name
Code
Quantity
Approx Value
Select
AMMUNITION RACK ASSY
Description
AMMUNITION RACK ASSY
Specification
AMMUNITION RACK ASSY
Testing / Inspection Facility
90
10
Number
7218
110190218
Ordnance Parachute Factory
The General Manager,
Kanpur
Kanpur
Kanpur, Uttar Pradesh
208004
Name
Code
Quantity
Approx Value
Select
DETACHABLE SHROUD LINK
Description
DETACHABLE SHROUD LINK
Specification
DETACHABLE SHROUD LINK
Drawing no.
DRG. NO.:ADRDE/1299-G(c) DRD/32/98
Manufacturing Technology
As per Drawing/specification
Testing / Inspection Facility
As per Drawing/specification
2110071001
1052
Number
7219
110190219
Ordnance Parachute Factory
The General Manager,
Kanpur
Kanpur
Kanpur, Uttar Pradesh
208004
Name
Code
Quantity
Approx Value
Select
TOWING RING 20MM ID
Description
TOWING RING 20MM.ID ADRDE/1402-02-002
Specification
DRG.NO.ADRDE/1402-02-002.
Drawing no.
DRG.NO.ADRDE/1402-02-002.
Testing / Inspection Facility
2110025023
6140
Number
7220
3193000746
Small Arms Factory
The General Manager,
Kanpur
Kanpur
Kanpur, Uttar Pradesh
208009
Name
Code
Quantity
Approx Value
Select
HAMMER MIM ROUTE FOR JVPC
Description
HAMMER (MIM ROUTE) FOR JVPC 5.56X30 MM TO DRG.NO.0204-03-04-02-14-007-00DA
Specification
HAMMER (MIM ROUTE) FOR JVPC 5.56X30 MM TO DRG.NO.0204-03-04-02-14-007-00DA
Drawing no.
TO DRG.NO.0204-03-04-02-14-007-00DA
Testing / Inspection Facility
Chemical and mechanical properties as per std. given drawing
Dimensional inspection for all dimensions given in the drawing and other parameter which are mentioned in relevant drawing.
7012471813
1173
Number
7221
OFMK/TM/V000421219
Ordnance Factory Medak
The General Manager
Yeddumailaram, Medak District
Medak
Telangana
502205
7222
TE NO 190153P9FO
Gun Carriage Factory
The General Manager,
Jabalpur
Jabalpur
Jabalpur,Madhya Pradesh
482011
Name
Code
Quantity
Approx Value
Select
FORGING FOR BUFFER BODY LOWER
Description
FORGING FOR BUFFER BODY (LOWER) TO DRG.NO GCF MN 5521 MATL.-IS:734-1975 (RE AFFIRMED 2001) DESIGNATION 24534 'W' CONDITION.
Specification
FORGING FOR BUFFER BODY (LOWER) TO DRG.NO GCF MN 5521 MATL.-IS:734-1975 (RE AFFIRMED 2001) DESIGNATION 24534 'W' CONDITION.
Testing / Inspection Facility
90
181
Number
7223
EOI CASTINGS 120MM MORTAR 19 20
Gun Carriage Factory
The General Manager,
Jabalpur
Jabalpur
Jabalpur,Madhya Pradesh
482011
Name
Code
Quantity
Approx Value
Select
Aluminum Casting for Buffer Body Lower Process Die Casting
Description
Aluminum Casting for Buffer Body Lower (Process: Die Casting) to achieve Radiography level-II in high stress zone i.e. Lug portion of casting & Radiography level-III in relatively less stress zone i.e. remaining portion of body to Drg. No. GCF-MN-5474 (D)
Specification
Aluminum Casting for Buffer Body Lower (Process: Die Casting) to achieve Radiography level-II in high stress zone i.e. Lug portion of casting & Radiography level-III in relatively less stress zone i.e. remaining portion of body to Drg. No. GCF-MN-5474 (D)
Drawing no.
GCF-MN-5474 (D)
Testing / Inspection Facility
90
APPROX Qty. 181
Number
7224
HAPP/MM/TE190022
High Energy Projectile Factory
The Cheif General Manager
Trichy
Trichy
Trichy, Tamil Nadu
620025
Name
Code
Quantity
Approx Value
Select
OBTURATOR FOR 125MM FSAPDS
Description
OBTURATOR FO 125MM FSAPDS DOP 550MM
Specification
AS PER MONITORING INSTRUCTION NO.HAPP/QA/SC/G/033, ISSU NO.01, REV NO.02 DT:02/05/19
Drawing no.
DRAWING NO.C OBT 125 6 501 0
Testing / Inspection Facility
01
945
Number
7225
MPF/PV/VR/BON1
Machine Tool Proto Type Factory
The General Manager,
Ambarnath
Ambarnath
Ambernath, Maharashtra
421502
Name
Code
Quantity
Approx Value
Select
7119033646 ELECTROMAGNET EM 74M 000TY
Description
ELECTROMAGNET EM 74M 000TY
Specification
AS PER ENCLOSED DRAWINGS
Testing / Inspection Facility
71
1
Number