DS Cat/Sec/Part No. 43/2540.008699 Tank Drinking Water Vehicular Stainless Steel 2KL capacity mounted on Truck 2.5 Ton, 4x4 TATA LPTA-715 TC/32 BS-III as per VFJ Specification No. VFJ/VEH/TATA/006/BS-III in consultation with specification no. CQAE/2540/1612/(b) Except i) Carries on Cabin ii) PTO in GB, Veh Color (Olive Green) with Log Book

Specification No. VFJ/VEH/TATA/006/BS-III in consultation with specification no. CQAE/2540/1612/(b)

DS Cat/Sec/Part No. 43/2540.008699 & Pt.No. 2230.38.01(V1)

HOUSING TRIGGER OF LMG 7.62MM BELT FED, DRG NO.SK-5817.

HOUSING TRIGGER OF LMG 7.62MM BELT FED, DRG NO.SK-5817.

DRG NO.SK-5817

HOUSING TRIGGER OF LMG 7.62MM BELT FED, DRG NO.SK-5817.

HOUSING TRIGGER OF LMG 7.62MM BELT FED, DRG NO.SK-5817.

DRG NO.SK-5817

HOUSING TRIGGER OF LMG 7.62MM BELT FED, DRG NO.SK-5817.

HOUSING TRIGGER OF LMG 7.62MM BELT FED, DRG NO.SK-5817.

DRG NO.SK-5817

COMPLETE POWER PLANT FOR 155MM 45 CAL FH GUN DHANUSH

COMPLETE POWER PLANT FOR 155MM 45 CAL FH GUN DHANUSH

POTASSIUM NITRATE GR.I FOR EXPL & PYRO TECHNIC

POTASSIUM NITRATE GR.I FOR EXPL & PYRO TECHNIC COMPOSITION SIZE -ALL PASSING THRO' 125 MICRO M IS SIEVE SPECN:IS:301-1982(2nd REV.) AMENDS 1 REAFFIRMED.2016 AN 6810-021A:2010 (REV.2)REAFFIRMED 2016

NIL

POTASSIUM SULPHATE GRADE 1

POTASSIUM SULPHATE GRADE 1 RETAINED ON 150 MICRO METER IS SIEVE : NIL. JSS SPECN NO. 6810-110:2016 (REV.No.4) DC : 6046-ME DT.08-06-2017.

NIL

ACETONE

ACETONE SPECN: IS 170-2004 (FOURTH REVISION) reaffirmed 2015

NIL

CARBAMITE UNDYED

CARBAMITE UNDYED IN FLAKE FORM OR POWDER FORM SPECN : JSS 6810 - 125 :2014 REVISION NO.3. DC-5311-ME DT.05-03-2015.

nil

PRB STEEL DRUMS 55 KG CAP(SER)

PRB STEEL DRUMS 55 KG CAPACITY (SERVICEABLE).

NIL

LEAD SCISSEL

LEAD SCISSEL THICKNESS NOT TO BE EXCEEDED 0.762 MM. SPECN: IS 405 (PT I) 1992 (THIRD REVISION) REAFFIRMED 2014

NIL

DNT GR.I JSS-1376-04

D N T GRADE I. SPECN: JSS 1376-04-2014 REVISION NO.3 DC NO. 5295-ME DT. 16.12.14

NIL

NITROGUANIDINE (PICRITE)

NITROGUANIDINE (PICRITE SPECIAL) TO SPECIFICATION, JSS 1376 - 03 : 2016 (REV. No.3) DC 6067-ME DT.08-06-2017.

NIL

STEEL ROD DIA 4.0MM X4000MM AS PER SPECI.STA 5 VIB OR V3 OR IS: 1570 PART 22/SEC-1) :1961 14CI4SI4 OR 20C8 OR BS:970- 1955, EN 7A OR BS:970 (PART-1): 983,070M20 FOR PIN HINGE AS PER DRG.NO. NAD 7606/3.

STEEL ROD DIA 4.0MM X4000MM AS PER SPECI.STA 5 VIB OR V3 OR IS: 1570 PART 22/SEC-1) :1961 14CI4SI4 OR 20C8 OR BS:970- 1955, EN 7A OR BS:970 (PART-1): 983,070M20 FOR PIN HINGE AS PER DRG.NO. NAD 7606/3.

SPRING STEEL WIRE DIA 1.1MM MATERIAL SPECIV.STA 3 OR 4 OR IS: 4454:2001,SL OR BS:1408:1964, 1408-C FOR SPRING AS PER DRG.ANO.NAD 7606/5

SPRING STEEL WIRE DIA 1.1MM MATERIAL SPECIV.STA 3 OR 4 OR IS: 4454:2001,SL OR BS:1408:1964, 1408-C FOR SPRING AS PER DRG.ANO.NAD 7606/5

BRASS TUBE 5.7(-0.1)MM O/D WALL THICKNESS 0.7MM (22SWG)X 4000MM STA 7 CZ 4 OR CZ 5 OR IS:2501-1963 OR BS:2871-1957,CZ 105, 378-1963, 855- 1963 OR 267-1963 FOR SLEEVE AS PER DRG NO. NAD 7606/7.

BRASS TUBE 5.7(-0.1)MM O/D WALL THICKNESS 0.7MM (22SWG)X 4000MM STA 7 CZ 4 OR CZ 5 OR IS:2501-1963 OR BS:2871-1957,CZ 105, 378-1963, 855- 1963 OR 267-1963 FOR SLEEVE AS PER DRG NO. NAD 7606/7.

STEEL SHEET 0.9MM (20SWG) X 1000 X 1500MM, STEEL IS:1570 (PART-2/SEC-1): 1979 10C4 OR BS:1449 PART-3A) : 1964 GD HS-12 FOR STRIKER AS PER DRG NO. NAD 7606/2.

STEEL SHEET 0.9MM (20SWG) X 1000 X 1500MM, STEEL IS:1570 (PART-2/SEC-1): 1979 10C4 OR BS:1449 PART-3A) : 1964 GD HS-12 FOR STRIKER AS PER DRG NO. NAD 7606/2.

STEEL SHEET 0.9MM (20SWG) X1000X1500MM.MATL. SPECTV.STA,5V2, V2A,V2B,OR IS:1570 (PART-2/SEC-1)- 1979, 15C4 OR BS:1449 (PART 3A):1964.GD HS-12 FOR FLY OFF LEVER AS PER DRG.NO.NAD 7606/4.

STEEL SHEET 0.9MM (20SWG) X1000X1500MM.MATL. SPECTV.STA,5V2, V2A,V2B,OR IS:1570 (PART-2/SEC-1)- 1979, 15C4 OR BS:1449 (PART 3A):1964.GD HS-12 FOR FLY OFF LEVER AS PER DRG.NO.NAD 7606/4.

SLEEVE DRAWING NO. NAD- 7606/7 FOR STRIKER MECHANISM NO. 8 MK-1 IN FINISH CONDITION.

SLEEVE DRAWING NO. NAD- 7606/7 FOR STRIKER MECHANISM NO. 8 MK-1 IN FINISH CONDITION.

PIN HINGE DRAWING NO. -NAD-7606/3 FOR STRIKER MECHANISM NO.8 MK-I IN FINISHED CONDITION

PIN HINGE DRAWING NO. -NAD-7606/3 FOR STRIKER MECHANISM NO.8 MK-I IN FINISHED CONDITION

RING FOR PIN SAFETY(ALTENATIVE DESIGN)IN FINISHED CONDITIONFOR STRIKER MECHANISH DRAWING NO.NAD 7606/1A

RING FOR PIN SAFETY(ALTENATIVE DESIGN)IN FINISHED CONDITIONFOR STRIKER MECHANISH DRAWING NO.NAD 7606/1A

MACHINING OF HOUSING MODIFIED DRG.NO.NAD 7606/6 TO FINISHED HOUSING MODIFIED AS PER DRAWING.DIE CASTING HOUSING MODIFIED WILL BE ISSUED AGAINST BANK GAURANTEE FORM LF NO.0841271004

MACHINING OF HOUSING MODIFIED DRG.NO.NAD 7606/6 TO FINISHED HOUSING MODIFIED AS PER DRAWING.DIE CASTING HOUSING MODIFIED WILL BE ISSUED AGAINST BANK GAURANTEE FORM LF NO.0841271004

Striker to Drg. no. NAD 7606/2 DT. 03 Sep 13 for Striker Mechanism in finished condition. ARD no.2572, DT.26.07.2019.

Striker to Drg. no. NAD 7606/2 DT. 03 Sep 13 for Striker Mechanism in finished condition. ARD no.2572, DT.26.07.2019.

NAD 7606/2

STRIKER MECHANISM HOUSING MODIEFIED (NAD 7606/6 ) ZINC ALLOY- ALLOY-"A", BS:1004:1955 AS PER DRG NO. SK-5741* DIE CASTING

STRIKER MECHANISM HOUSING MODIEFIED (NAD 7606/6 ) ZINC ALLOY- ALLOY-"A", BS:1004:1955 AS PER DRG NO. SK-5741* DIE CASTING

PIN FOR PIN SAFETY IN FINISH CONDITION AS PER DRAWING NO NAD 7606/1A OF STRIKER MECHANISM NO.8 MK-1.

PIN FOR PIN SAFETY IN FINISH CONDITION AS PER DRAWING NO NAD 7606/1A OF STRIKER MECHANISM NO.8 MK-1.

WASHER SPRING SINGLE COIL TYPE B STEEL ZINC PLATED (NOMINAL SIZE)6MM CAT/PT.NO.G1/5310-001434 SPECN.IS:3063:1972 & SS NO.CIGS/SS/173(D).THICKNESS OF ZINC PLATING TO IS 1573-1970 SERVICE CONDN.NO.1(GR.FE ZN 5)CHROMEPASSIVATED

AS PER DRG

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

WASHER SPRING SINGLE COIL TYPE B STEEL ZINC PLATED (NOMINAL SIZE)6MM CAT/PT.NO.G1/5310-001434 SPECN.IS:3063:1972 & SS NO.CIGS/SS/173(D).THICKNESS OF ZINC PLATING TO IS 1573-1970 SERVICE CONDN.NO.1(GR.FE ZN 5)CHROMEPASSIVATED

AS PER DRG

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

DS Cat/Sec/Part No. 43/2540.008699 Tank Drinking Water Vehicular Stainless Steel 2KL capacity mounted on Truck 2.5 Ton, 4x4 TATA LPTA-715 TC/32 BS-III as per VFJ Specification No. VFJ/VEH/TATA/006/BS-III in consultation with specification no. CQAE/2540/1612/(b) Except i) Carries on Cabin ii) PTO in GB, Veh Color (Olive Green) with Log Book

Specification No. VFJ/VEH/TATA/006/BS-III in consultation with specification no. CQAE/2540/1612/(b)

DS Cat/Sec/Part No. 43/2540.008699 & Pt.No. 2230.38.01(V1)

MOD STEPNEY MOUNTING ARRANGEMENT ON RH SIDE FOR UPGRADED MPV 4 by 4 DRG NO 2700 57 32

MOD STEPNEY MOUNTING ARRANGEMENT ON RH SIDE FOR UPGRADED MPV 4 by 4 DRG NO 2700 57 32

DRG NO 2700 57 32

MOD STEPNEY MOUNTING ARRANGEMENT ON LH SIDE FOR UPGRADED MPV 4 by 4 DRG NO 2699 57 31

MOD STEPNEY MOUNTING ARRANGEMENT ON LH SIDE FOR UPGRADED MPV 4 by 4 DRG NO 2699 57 31

DRG NO 2699 57 31

HOOK TOWING TO PART NO BOF 4015544

HOOK TOWING TO PART NO BOF 4015544

ARM REST TO DRG NO BOF 5067128

ARM REST TO DRG NO BOF 5067128

BATTERY SECONDARY LEAD ACID 12V 120AH AT 5 HRS RATE WITH SIDE TERMINAL PROTECTOR TOP COVER DRG NO CQAL 4429B DS CAT NO LV6 MT4 6140 005117 SPEC CQAL 637 C 2014

BATTERY SECONDARY LEAD ACID 12V 120AH AT 5 HRS RATE WITH SIDE TERMINAL PROTECTOR TOP COVER DRG NO CQAL 4429B DS CAT NO LV6 MT4 6140 005117 SPEC CQAL 637 C 2014

As per rquirement & specification

As per rquirement & specification

CLOTH POLYPROPYLENE OG TPO COATING 115 CMS WIDE.

SPECIFICATION NO: JSS 8305 - 35 : 2014 {7218/PK} EXCEPT THAT

AS PER REQUIREMENT & SPECIFICATION

AS PER REQUIREMENT & SPECIFICATION

IND/TC/3020

IND/TC/3020

MATL. WILLBE SUPPD. AS PER APPENDIX-I OF DMSRDE SPECN. NO.

MATL. WILLBE SUPPD. AS PER APPENDIX-I OF DMSRDE SPECN. NO.

MATL. WILLBE SUPPD. AS PER APPENDIX-I OF DMSRDE SPECN. NO.

MATL. WILLBE SUPPD. AS PER APPENDIX-I OF DMSRDE SPECN. NO.

MATL. WILLBE SUPP. AS PER APPENDIX-I OF DMSRDE SPECN. NO.

MATL. WILLBE SUPP. AS PER APPENDIX-I OF DMSRDE SPECN. NO.

MATL. WILLBE SUPP. AS PER APPENDIX-III OF DMSRDE SPECN.NO.

MATL. WILLBE SUPP. AS PER APPENDIX-III OF DMSRDE SPECN.NO.

KAOLIN TO JSS-9620-02:2010, REV-2. DC NO: 5000 ME, DT.05.01.2011.

KAOLIN TO JSS-9620-02:2010, REV-2. DC NO: 5000 ME, DT.05.01.2011.

BARYTES (TYPE-2) TO JSS: 6810-51:2013, REV-3 DC.NO. 5195-ME, DT.19.03.14.

BARYTES (TYPE-2) TO JSS: 6810-51:2013, REV-3 DC.NO. 5195-ME, DT.19.03.14.

PARAFFIN WAX SPECIAL TO JSS-9160-06-2002, Rev-2 Ref-2011

PARAFFIN WAX SPECIAL TO JSS-9160-06-2002, Rev-2 Ref-2011

MINERAL JELLY TO JSS-8030-09:2010, REV-2 DC-5011-ME DTD.14.02.11

MINERAL JELLY TO JSS-8030-09:2010, REV-2 DC-5011-ME DTD.14.02.11

DISC TO DRG.NO-6387457,DC.NO-36490-A, DT-19.11.98.

DISC TO DRG.NO-6387457,DC.NO-36490-A, DT-19.11.98.

SEAL TO DRG NO.6390155,DC NO.35565- A,DT.28.08.93 FOR SEALING OF STEEL STRAP OF SIZE:19.05MM(W) X 0.63MM THICK.

SEAL TO DRG NO.6390155,DC NO.35565- A,DT.28.08.93 FOR SEALING OF STEEL STRAP OF SIZE:19.05MM(W) X 0.63MM THICK.

HIGH TENSILE STEEL STRAP TO IS:5872 -1990,GRADE-1,REAT-2010-SUITABLY BLUED OR RUST PROOFED (SIZE :19.05MM WIDTH x 0.63MM THICK) NOTE:MAXIMUM OUTER DIAMETER OF THE ROLL=600MM,INNER DIAMETER OF THE ROLL=300+10MM,WEIGHT OF ONE ROLL = 50 KGS MAXIMUM AND MAXIMUM NUMBER OF LAYERS IN ONE ROLL=02.

HIGH TENSILE STEEL STRAP TO IS:5872 -1990,GRADE-1,REAT-2010-SUITABLY BLUED OR RUST PROOFED (SIZE :19.05MM WIDTH x 0.63MM THICK) NOTE:MAXIMUM OUTER DIAMETER OF THE ROLL=600MM,INNER DIAMETER OF THE ROLL=300+10MM,WEIGHT OF ONE ROLL = 50 KGS MAXIMUM AND MAXIMUM NUMBER OF LAYERS IN ONE ROLL=02.

FELT DISC TO DRG.NO-6387455,DC.NO- 36569-A, DT-22.06.99.

FELT DISC TO DRG.NO-6387455,DC.NO- 36569-A, DT-22.06.99.

PAD TO DRG.6387456 ,DC.NO-36569-A,DT -22.06.99,FOR 155MM SHELL M107(SIZE-45MM DIA X 10MM THICK)

PAD TO DRG.6387456 ,DC.NO-36569-A,DT -22.06.99,FOR 155MM SHELL M107(SIZE-45MM DIA X 10MM THICK)

CAPSULE TO DRG.NO-6387453,DC.NO- 36490-A,DT.19.11.98

CAPSULE TO DRG.NO-6387453,DC.NO- 36490-A,DT.19.11.98

DRG. No.5173961, DC No.36490-A,Dt.19.11.98 (IS:737-1974, GR.19000 IN 0 CONDITION

DRG. No.5173961, DC No.36490-A,Dt.19.11.98 (IS:737-1974, GR.19000 IN 0 CONDITION

DRG.NO.3058086, WITH LATEST DC(I) 36820-A, DT.16.03.2002

DRG.NO.3058086, WITH LATEST DC(I) 36820-A, DT.16.03.2002

COTTON SEWING THREAD 210 d TEX/2(28 S/2) SCOURED FOR AEROSPACE PURPOSES.(IN THE TUBE OF 1000 MTRS EACH)

SPECN. NO.: IS : 1376-1998 Except that :- i)In appearance Finish and other respects not defined in this Specn. the material shall conform to the corresponding sealed pattern held in the custody of the Controller, CQAT&C Kanpur. (ii) Sampling Plan & Criteria of conformity As per CQAT&C/QAI/TC-8/13. (III) ph Value should be 6.0 to 8.5 PACKING & MARKING : AS PER SCHEDULE NO. CQAT&C/PMS/36(a).

SHOULDER BUCKLE (UPPER)

DRG. NO.:ADRDE/1302 (a) DRD/44/98.

DRG. NO.:ADRDE/1302 (a) DRD/44/98.

Spall Liner as per Specification No.VFJ/IRD/SML/4WD 3365/SPALL-LINER/02/A dtd. 11/10/2019 and DRG No. 6000-47-41-01/A, 6001-47-41-01/A, 6002-47-41-01/A, 6003-47-41-01/A, 6004-47-41 -01/A”. as per annexure ‘A’( Amended on 22/01/2020)

Specification No.VFJ/IRD/SML/4WD 3365/SPALL-LINER/02/A dtd. 11/10/2019

DRG No. 6000-47-41-01/A, 6001-47-41-01/A, 6002-47-41-01/A, 6003-47-41-01/A, 6004-47-41 -01/A”. as per annexure ‘A’( Amended on 22/01/2020)

CORD COTTON BS 40 KG UD

SPECN-ADRDE/SPECN/1992/36(TYPE-II)

FABRIC NYLON, 190 GSM, UNDYED

ADRDE/QMS/TGTE/F/2019/03 Dated 16/05/2019

• As per Specification/Drawing

• As per Specification/Drawing

PAD FELT(D-45,+/-1MM,T-6.4+/-0.65MM TO DRG.NO.155-1080,DC NO.36792-A,DT.01.11.2001

PAD FELT(D-45,+/-1MM,T-6.4+/-0.65MM TO DRG.NO.155-1080,DC NO.36792-A,DT.01.11.2001

WASHER TO DRG NO.155-1120,DC NO- 36792-A,DT.01.11.2001

WASHER TO DRG NO.155-1120,DC NO- 36792-A,DT.01.11.2001

PAINT READYMIXED BLACK,AIR DRYING MARKING GLOSS VALUE 31 TO 50 AT 45 DEGREE TO SPECN:IS-138- 1992(3RD REV.) FOR DEFENCE USE, MODE OF APPLICATION: STENCILLING (TO BE SUPPLIED IN 500 ML PACK).

PAINT READYMIXED BLACK,AIR DRYING MARKING GLOSS VALUE 31 TO 50 AT 45 DEGREE TO SPECN:IS-138- 1992(3RD REV.) FOR DEFENCE USE, MODE OF APPLICATION: STENCILLING (TO BE SUPPLIED IN 500 ML PACK).

PAINT READYMIXED(MIDDLE BUFF) AIR DRYING SEMI GLOSSY, TYPE-BRUSHING CONSISTENCY TO SPECN: IS-168-REAFFIRMED 2012 APPLICABLE FOR DEFENCE USE & COLOUR SHADEISC NO.359 OF IS: 5-2007(6TH REVISION) AMENDMENT NO.1.(TO BE SUPPLIED IN 5 LTRS PACK)

PAINT READYMIXED(MIDDLE BUFF) AIR DRYING SEMI GLOSSY, TYPE-BRUSHING CONSISTENCY TO SPECN: IS-168-REAFFIRMED 2012 APPLICABLE FOR DEFENCE USE & COLOUR SHADEISC NO.359 OF IS:5-2007(6TH REVISION) AMENDMENT NO.1.(TO BE SUPPLIED IN 5 LTRS PACK)

PAINT R/M AIRDRYING MATT ORTHOXYLENE BASED ZINC CHROME RED OXIDE TO SPECN.IND/ ME/ 964(PROV), DCI 5262-ME, DT-24.06.14,MODE OF APPLICATION-SPRAYING/ BRUSHING/ DIPPING/ POUR, FOR INNER COATING OF HE. SHELL. [TO BE SUPPLIED IN 500ML PACK] ADDITIONAL REQUIREMENT:- THE ENCLOSED TEST PARAMETERS TO BE ENSURED,BY TESTING THE ADVANCE SAMPLE BEFORE BULK SUPPLY.THERE WILL BE A COMPARATIVE TEST OF ADVANCE SAMPLE & THAT OF THE SAMPLE DRAWN FROM THE BULK SUPPLY IN CASE OF ADVANCE SAMPLE IS ACCEPTED. TEST PARAMETERS ARE ENCLOSED.

PAINT R/M AIRDRYING MATT ORTHOXYLENE BASED ZINC CHROME RED OXIDE TO SPECN.IND/ ME/ 964(PROV), DCI 5262-ME, DT-24.06.14,MODE OF APPLICATION-SPRAYING/ BRUSHING/ DIPPING/ POUR, FOR INNER COATING OF HE. SHELL. [TO BE SUPPLIED IN 500ML PACK] ADDITIONAL REQUIREMENT:- THE ENCLOSED TEST PARAMETERS TO BE ENSURED,BY TESTING THE ADVANCE SAMPLE BEFORE BULK SUPPLY.THERE WILL BE A COMPARATIVE TEST OF ADVANCE SAMPLE & THAT OF THE SAMPLE DRAWN FROM THE BULK SUPPLY IN CASE OF ADVANCE SAMPLE IS ACCEPTED. TEST PARAMETERS ARE ENCLOSED.

PARANITRO TOLUENE TO SPECN.IND/ME/962 (PROV) DC-3284-ME, DT-21.02.95.

PARANITRO TOLUENE TO SPECN.IND/ME/962 (PROV) DC-3284-ME, DT-21.02.95.

X-RAY CHEMICALS COMPRISING OF AUTO PROCESSOR DEVELOPER AND AUTO PROCESSOR FIXER FOR INDUSTRIAL USE (TO BE SUPPLIED AS A SET FOR PREPARING HOMOGENOUS SOLUTION OF 20 LITRES DEVELOPER AND 25 LITRES FIXER AND DETAILS OF CONSTITUENTS TO BE MENTIONED).

X-RAY CHEMICALS COMPRISING OF AUTO PROCESSOR DEVELOPER AND AUTO PROCESSOR FIXER FOR INDUSTRIAL USE (TO BE SUPPLIED AS A SET FOR PREPARING HOMOGENOUS SOLUTION OF 20 LITRES DEVELOPER AND 25 LITRES FIXER AND DETAILS OF CONSTITUENTS TO BE MENTIONED).

X-RAY FILM ROLL, WIDTH-17"x 200 FEET LENGTH, FILM SPEED-100. DIMENSION OF PAPER CYLINDER ON WHICH FILMS TO BE ROLLED: ID = 77+/-2.0 MM, OD = 90.0 MM MAX., LENGTH = 430+/-10.0 MM AND OVERALL OD OF X-RAY FILM ROLL = 150MM MAX.

X-RAY FILM ROLL, WIDTH-17"x 200 FEET LENGTH, FILM SPEED-100. DIMENSION OF PAPER CYLINDER ON WHICH FILMS TO BE ROLLED: ID = 77+/-2.0 MM, OD = 90.0 MM MAX., LENGTH = 430+/-10.0 MM AND OVERALL OD OF X-RAY FILM ROLL = 150MM MAX.

• AS PER STANDARD NORM

• TEST CERTIFICATE AND TEST IN BUYER SITE

DRG. No.155-1070, DC No.36792-A, Dt.01.11.2001 (SPECIAL REQUIREMENT HEIGHT SHOULD BE 33.7 - 0.5 MM)

DRG. No.155-1070, DC No.36792-A, Dt.01.11.2001 (SPECIAL REQUIREMENT HEIGHT SHOULD BE 33.7 - 0.5 MM)

OBTURATOR TO DESIGNER REF.NO.155- 1140,DC NO.37025-A,DT.08.08.2005.

OBTURATOR TO DESIGNER REF.NO.155- 1140,DC NO.37025-A,DT.08.08.2005.

SCUFF PROTECTOR TO DRG.NO:155-1110 DC NO.37025-A,DT.08.08.05.

SCUFF PROTECTOR TO DRG.NO:155-1110 DC NO.37025-A,DT.08.08.05.

GRUMMET ASSY CONSISTING OF (1)GRUMMET 155MM (2) RING (3) PIN ASSEMBLY FOR SHELL 155MM ERFB/BB & BT TO DESIGNER'S REF.NO:04-13-2452-148. (REF.OFBL DRG.NO: BL/PB/U-5/343)..

GRUMMET ASSY CONSISTING OF (1)GRUMMET 155MM (2) RING (3) PIN ASSEMBLY FOR SHELL 155MM ERFB/BB & BT TO DESIGNER'S REF.NO:04-13-2452-148. (REF.OFBL DRG.NO: BL/PB/U-5/343)..

MOP 12 SHELLS 155MM BT ON PELLET WITHOUT GRUMET TO DRG.NO:155-1000(M)(UNIT LOAD)CONSISTING OF PALLET TO DRG.NO.155-1210(M), FRAME ASSEMBLY TO DRG.NO.155-1230(M) DC NO.37126-A,DT.25.7.07.

AS PER DRAWING / SPECIFICATIONS

EYELET ALUMINIUM ALLOY CHEMICALLY PASSIVATED WITH WASHER NO.21

SPECN- EYELET ALUMINIUM ALLOY WITH WASHER NO.21 CONFIRMING TO IS:4084-78 WITH amdt. NO.1 & SUPPLEMENTARY SCHEDULE NO. CQA(GS)/SS/335

BATTERY SECONDARY LEAD ACID 12V 120AH AT 5 HRS RATE WITH SIDE TERMINAL PROTECTOR TOP COVER DRG NO CQAL 4429B DS CAT NO LV6 MT4 6140 005117 SPEC CQAL 637 C 2014

BATTERY SECONDARY LEAD ACID 12V 120AH AT 5 HRS RATE WITH SIDE TERMINAL PROTECTOR TOP COVER DRG NO CQAL 4429B DS CAT NO LV6 MT4 6140 005117 SPEC CQAL 637 C 2014

ST.SQR.65MMX2.50MTR LONG OR MULTIPLE TO SPEC.BS:3S144-1995 (1999)GD.S144 D LFVD(WITH CAL.SILICATE TREATMENT,SULPHUR- 0.015MAX,PHOSPHORUS-0.03MAX.AS PER SPCN. IS:4163-1982,INCLU. RATING i.e.THIN/THICK-SULPHIDE:1.5-1,ALUMINA:1.5-1,SILICATE: 1.5-1,GLOBULAR OXIDE:2.0-1.

ST.SQR.65MMX2.50MTR LONG OR MULTIPLE TO SPEC.BS:3S144-1995 (1999)GD.S144 D LFVD(WITH CAL.SILICATE TREATMENT,SULPHUR- 0.015MAX,PHOSPHORUS-0.03MAX.AS PER SPCN. IS:4163-1982,INCLU. RATING i.e.THIN/THICK-SULPHIDE:1.5-1,ALUMINA:1.5-1,SILICATE: 1.5-1,GLOBULAR OXIDE:2.0-1.

MOD STEPNEY MOUNTING ARRANGEMENT ON RH SIDE FOR UPGRADED MPV 4 by 4 DRG NO 2700 57 32

MOD STEPNEY MOUNTING ARRANGEMENT ON RH SIDE FOR UPGRADED MPV 4 by 4 DRG NO 2700 57 32

DRG NO 2700 57 32

MOD STEPNEY MOUNTING ARRANGEMENT ON LH SIDE FOR UPGRADED MPV 4 by 4 DRG NO 2699 57 31

MOD STEPNEY MOUNTING ARRANGEMENT ON LH SIDE FOR UPGRADED MPV 4 by 4 DRG NO 2699 57 31

DRG NO 2699 57 31

As per specification / Drawings

As per specification / Drawings

MACHINING OF CAP OF 9MM CARBINE IN FINISHED CONDITION DS CAT NO 1005-000860 DC(I)NO 26881-SA DT01.7.16 FROM IC OF CAP (MATERIAL TO BE SUPPLIED BY FACTORY AGAINST BANK GUARANTEE LF NO 0133077013)

MACHINING OF CAP OF 9MM CARBINE IN FINISHED CONDITION DS CAT NO 1005-000860 DC(I)NO 26881-SA DT01.7.16 FROM IC OF CAP (MATERIAL TO BE SUPPLIED BY FACTORY AGAINST BANK GUARANTEE LF NO 0133077013)

1005-000860

MACHINING OF CAP OF 9MM CARBINE IN FINISHED CONDITION DS CAT NO 1005-000860 DC(I)NO 26881-SA DT01.7.16 FROM IC OF CAP (MATERIAL TO BE SUPPLIED BY FACTORY AGAINST BANK GUARANTEE LF NO 0133077013)

MACHINING OF CAP OF 9MM CARBINE IN FINISHED CONDITION DS CAT NO 1005-000860 DC(I)NO 26881-SA DT01.7.16 FROM IC OF CAP (MATERIAL TO BE SUPPLIED BY FACTORY AGAINST BANK GUARANTEE LF NO 0133077013)

1005-000860

A SET OF 04 COMPONENTS OF HR BINO

A SET OF 04 COMPONENTS OF HR BINO