TRANSISTOR 2T935A TRANSISTOR 2T935A AS PER SPECN. /DRG. NO. AAO.3 39.006 TU WITH DATASHEET

TRANSISTOR 2T935A TRANSISTOR 2T935A AS PER SPECN. /DRG. NO. AAO.3 39.006 TU WITH DATASHEET

TRANSISTOR 2T935A TRANSISTOR 2T935A AS PER SPECN. /DRG. NO. AAO.3 39.006 TU WITH DATASHEET

• ELECTRONIC ITEMS

• ELECTRONIC ITEMS

TRANSISTOR 2T830G Drg No.AA0.339.139 TU TRANSISTOR 2T830G AS PER DRG./SPECN. NO.AA0.339. 139 TU

TRANSISTOR 2T830G Drg No.AA0.339.139 TU TRANSISTOR 2T830G AS PER DRG./SPECN. NO.AA0.339. 139 TU

TRANSISTOR 2T830G Drg No.AA0.339.139 TU TRANSISTOR 2T830G AS PER DRG./SPECN. NO.AA0.339. 139 TU

• ELECTRONIC ITEMS

• ELECTRONIC ITEMS

TRANSISTOR 2T908A Drg No.GE3.365.007 TU TRANSISTOR 2T908A AS PER DRG./SPECN. NO.GE3.365.007 TU

TRANSISTOR 2T908A Drg No.GE3.365.007 TU TRANSISTOR 2T908A AS PER DRG./SPECN. NO.GE3.365.007 TU

TRANSISTOR 2T908A Drg No.GE3.365.007 TU TRANSISTOR 2T908A AS PER DRG./SPECN. NO.GE3.365.007 TU

• ELECTRONIC ITEMS

• ELECTRONIC ITEMS

CAP K10-43A-MPO-100PF +/-2% Drg No.OZHO460165TU CAPACITOR K10-43A-MPO-100PF+/- 2% AS PER SPECN. NO. OZHO460165TU

CAP K10-43A-MPO-100PF +/-2% Drg No.OZHO460165TU CAPACITOR K10-43A-MPO-100PF+/- 2% AS PER SPECN. NO. OZHO460165TU

CAP K10-43A-MPO-100PF +/-2% Drg No.OZHO460165TU CAPACITOR K10-43A-MPO-100PF+/- 2% AS PER SPECN. NO. OZHO460165TU

• ELECTRONIC ITEMS

• ELECTRONIC ITEMS

CAPACITOR K10-17B-N90-0.033MF- Drg No.OZHO460107TU CAPACITOR K10-17B-N90-0.033MF- V AS PER SPECN. NO. OZHO460107TU

CAPACITOR K10-17B-N90-0.033MF- Drg No.OZHO460107TU CAPACITOR K10-17B-N90-0.033MF- V AS PER SPECN. NO. OZHO460107TU

CAPACITOR K10-17B-N90-0.033MF- Drg No.OZHO460107TU CAPACITOR K10-17B-N90-0.033MF- V AS PER SPECN. NO. OZHO460107TU

• ELECTRONIC ITEMS

• ELECTRONIC ITEMS

TRANSISTOR,2T831G Drg No. AAO339140TU TRANSISTOR 2T831G AS PER SPECI FICATION NO.AAO339140TU

TRANSISTOR,2T831G Drg No. AAO339140TU TRANSISTOR 2T831G AS PER SPECI FICATION NO.AAO339140TU

• ELECTRONIC ITEMS

• ELECTRONIC ITEMS

CAP.K10-17A-M47-1200PF,+/-10% CAPACITOR K10-17A-M47-1200PF+/ -10% AS PER SPECIFICATIN NO. OZHO460107TU

CAP.K10-17A-M47-1200PF,+/-10% CAPACITOR K10-17A-M47-1200PF+/ -10% AS PER SPECIFICATIN NO. OZHO460107TU

CAP.K10-17A-M47-1200PF,+/-10% CAPACITOR K10-17A-M47-1200PF+/ -10% AS PER SPECIFICATIN NO. OZHO460107TU

• ELECTRONIC ITEMS

• ELECTRONIC ITEMS

TRANSISTOR,2T3108V Drg No.AAO339026TU TRANSISTOR 2T3108V ASPER SPECN . NO.AAO339026TU

TRANSISTOR,2T3108V Drg No.AAO339026TU TRANSISTOR 2T3108V ASPER SPECN . NO.AAO339026TU

TRANSISTOR,2T3108V Drg No.AAO339026TU TRANSISTOR 2T3108V ASPER SPECN . NO.AAO339026TU

• ELECTRONIC ITEMS

• ELECTRONIC ITEMS

METAL COMPONENT SPRING

SPECN-ADRDE/1.6.01.01.02-02

• AS PER SPECIFICATION/DRAWING

• AS PER SPECIFICATION/DRAWING

COMBINATION HARNESS THROUGH TRADE ASSISTANCE FOR STITCHING ONLY

SPECN-DMSRD&E/T&DS/93/410(B)

• AS PER SPECIFICATION/DRAWING

• AS PER SPECIFICATION/DRAWING

SET OF GASKETS AS PER ANNEXURE GKT1 OF KAVACH MOD II 08 Sets

SET OF GASKETS AS PER ANNEXURE GKT1 OF KAVACH MOD II 08 Sets

• i) Rubber Moulding ii) Die making In case tenderer is outsourcing any/some of the above activities, copy of the agreement with such source shall be submitted. The Rubber moulding facility is mandatory

• (i) Standard Measuring Instruments & Gauges (ii) Rubber Testing Facility with NABL/IRMRA accreditation Tenderer shall satisfy /declare the required inspection facilities are available either in house or outsourced

MANUFACTURING AND SUPPLY OF SET OF STEEL CASTING ITEMS AS PER ANNEXURE STC1 FOR KAVACH MOD II, QTY: 08 SETS

MANUFACTURING AND SUPPLY OF SET OF STEEL CASTING ITEMS AS PER ANNEXURE STC1 FOR KAVACH MOD II, QTY: 08 SETS

ANNEXURE STC1

• i) Foundry Facility for Steel Casting ii) Heat Treatment Facility iii) Conventional/CNC machining iv) Surface Treatment In case tenderer is outsourcing any/some of the above activities, copy of agreement with such source shall be submitted. The machining facility is mandatory.

• (i) Measuring Instruments/CMM & Gauges (ii) Radiography Testing Facility duly certified by Government (iii) Material Chemical & Physical facility with NABL accreditation Tenderer shall satisfy /declare the required inspection facilities are available either in house or outsourced.

MANUFACTURING AND SUPPLY OF SET OF STAINLESS STEEL PLATE AS PER ANNEXURE SSP1 FOR KAVACH MOD II , QTY: 08 Sets

MANUFACTURING AND SUPPLY OF SET OF STAINLESS STEEL PLATE AS PER ANNEXURE SSP1 FOR KAVACH MOD II , QTY: 08 Sets

• (i)Conventional /CNC machining Facility (ii) Grinding Facility In case tenderer is outsourcing any/some of the above activities, copy of agreement with such source shall be submitted. The machining facility is mandatory

• (i) Standard Measuring Instruments & Gauges (ii)Material Chemical & Physical facility with NABL accreditation Tenderer shall satisfy /declare the required inspection facilities are available either in house or outsourced

Striker Mechanism Housing Modified (NAD 7606/6) Zinc Alloy- Alloy-"A", BS:1004:1955 as per Drg No. SK- 5741*. Die Casting

Striker Mechanism Housing Modified (NAD 7606/6) Zinc Alloy- Alloy-"A", BS:1004:1955 as per Drg No. SK- 5741*. Die Casting

Drg No. SK- 5741*. Die Casting

• Die Casting

• 1-Chemical & Mechanical properties as per std.given drawing
• 2-Dimensional Inspection, for all dimensions given in the drawing & other Parameter which are mentioned in relevant drawing.

MANUFACTURING & SUPPLY OF SET OF HEAVY MACHINING ITEMS AS PER ANNEXURE MH1 FOR KAVACH MOD II , QTY: 08 SETS

MANUFACTURING & SUPPLY OF SET OF HEAVY MACHINING ITEMS AS PER ANNEXURE MH1 FOR KAVACH MOD II , QTY: 08 SETS

• (i) Heat treatment Facility (ii) Coventional/CNC Machining (iii)Grinding iv) Surface Treatment Facility v) Hard Chrome Plating vi) Nitriding vi) Gear Cutting In case tenderer is outsourcing any/some of the above activities, copy of agreement with such source shall be submitted. The machining facility is mandatory

• (i) Measuring Instruments/CMM & Gauges (ii) Material Chemical & Physical facility with NABL accreditation Tenderer shall satisfy /declare the required inspection facilities are available either in house or outsourced

MANUFACTURING AND SUPPLY OF SET OF FABRICATION WELDING AND MACHINING ITEMS AS PER ANNEXURE SWF2 FOR KAVACH MOD II FOR QTY 08 SETS

MANUFACTURING AND SUPPLY OF SET OF FABRICATION WELDING AND MACHINING ITEMS AS PER ANNEXURE SWF2 FOR KAVACH MOD II FOR QTY 08 SETS

• i)Heat Treatment facility ii) Conventional/CNC machining iii) Welding iv) Surface Treatment facility In case tenderer is outsourcing any/some of the above activities, copy of agreement with such source shall be submitted. The machining facility is mandatory

• i) Measuring Instruments/CMM & Gauges ii) Material Chemical & Physical facility with NABL accreditation Tenderer shall satisfy /declare the required inspection facilities are available either in house or outsourced

MOTOR DPM 25-N1-01 MOTOR DPM 25-N1-01 SPCN NO OST 160.515.022-76

MOTOR DPM 25-N1-01 MOTOR DPM 25-N1-01 SPCN NO OST 160.515.022-76

MOTOR DPM 25-N1-01 MOTOR DPM 25-N1-01 SPCN NO OST 160.515.022-76

• ELECTRONIC ITEMS

• ELECTRONIC ITEMS

MOTOR DPR-42-N1-03 Drg No.OST160515007.74 MOTOR DPR-42-N1-03 AS PER DRG. NO.OST160515007.74

MOTOR DPR-42-N1-03 Drg No.OST160515007.74 MOTOR DPR-42-N1-03 AS PER DRG. NO.OST160515007.74

MOTOR DPR-42-N1-03 Drg No.OST160515007.74 MOTOR DPR-42-N1-03 AS PER DRG. NO.OST160515007.74

• ELECTRONIC ITEM

• ELECTRONIC ITEM

CONNECTOR(P), 2RMG18B7SH1E2B CONNECTOR-PLUG 2RMG18B7SH1E2B , AS PER SPECN.NO:OLF/AL/CON/02 /H AND JSS-50860

CONNECTOR(P), 2RMG18B7SH1E2B CONNECTOR-PLUG 2RMG18B7SH1E2B , AS PER SPECN.NO:OLF/AL/CON/02 /H AND JSS-50860

CONNECTOR(P), 2RMG18B7SH1E2B CONNECTOR-PLUG 2RMG18B7SH1E2B , AS PER SPECN.NO:OLF/AL/CON/02 /H AND JSS-50860

• ELECTRONIC ITEMS

• ELECTRONIC ITEMS

SMD RELAY TQ2SA24ULCSA SMD RELAY TQ2SA24ULCSA

SMD RELAY TQ2SA24ULCSA SMD RELAY TQ2SA24ULCSA

SMD RELAY TQ2SA24ULCSA SMD RELAY TQ2SA24ULCSA

• ELECTRONIC ITEMS

• ELECTRONIC ITEMS

RESISTOR SP5-21A-1-4.7 KOHM Drg No.OZHO468530TY RESISTOR SP5-21A-1-4.7 KOHM +/ -0.5% AS PER DRG.NO.OZHO468530 TY

RESISTOR SP5-21A-1-4.7 KOHM Drg No.OZHO468530TY RESISTOR SP5-21A-1-4.7 KOHM +/ -0.5% AS PER DRG.NO.OZHO468530 TY

RESISTOR SP5-21A-1-4.7 KOHM Drg No.OZHO468530TY RESISTOR SP5-21A-1-4.7 KOHM +/ -0.5% AS PER DRG.NO.OZHO468530 TY

• ELECTRONIC ITEM

• ELECTRONIC ITEM

CHANGEOVER SWITCH PG2-9-6P2NVK Drg No.OYUO. 360.068 TU CHANGEOVER SWITCH PG2-9-6P 2N VK AS PER DRG. NO. OYUO.360.068 T U

CHANGEOVER SWITCH PG2-9-6P2NVK Drg No.OYUO. 360.068 TU CHANGEOVER SWITCH PG2-9-6P 2N VK AS PER DRG. NO. OYUO.360.068 T U

CHANGEOVER SWITCH PG2-9-6P2NVK Drg No.OYUO. 360.068 TU CHANGEOVER SWITCH PG2-9-6P 2N VK AS PER DRG. NO. OYUO.360.068 T U

• ELECTRONIC ITEMS

• ELECTRONIC ITEMS

9069112607 UPPER MOUNTING PLATFORM

9069112607 UPPER MOUNTING PLATFORM

• 9069112607 UPPER MOUNTING PLATFORM

• 9069112607 UPPER MOUNTING PLATFORM

GUN SHIELD TO DRG NO GCF AD 230 026

GUN SHIELD TO DRG NO GCF AD 230 026

• GUN SHIELD TO DRG NO GCF AD 230 026

• GUN SHIELD TO DRG NO GCF AD 230 026

Rectified Ethyl Alcohol as per Russian Specification No. GOST 18300-87 grade-Premium. Size 1 Litre/1.5 litre/2 litre.

Rectified Ethyl Alcohol as per Russian Specification No. GOST 18300-87 grade-Premium. Size 1 Litre/1.5 litre/2 litre.

• as per file attached

• as per file attached

Magnet Permanent as per Drg. No. CQA(I)393/8 for Device Firing 1B CAT/PT.No.5999-006768

Magnet Permanent as per Drg. No. CQA(I)393/8 for Device Firing 1B CAT/PT.No.5999-006768

Drg. No. CQA(I)393/8

• Machining

• 1. Chemical & Mechanical properties as per std. given drawing. 2. Dimensional inspection, for all dimensions given in the drawing & other parameter which are mentioned in relevant drawing.

PLUG AS PER DRG.NO. CQA(I)393/4 FOR DEVICE FIRING 1B FOR MINE

PLUG AS PER DRG.NO. CQA(I)393/4 FOR DEVICE FIRING 1B FOR MINE

DRG.NO. CQA(I)393/4

• Machining
• Moulding

• 1-Chemical & Mechanical properties as per std.given drawing
• 2-Dimensional Inspection, for all dimensions given in the drawing & other Parameter which are mentioned in relevant drawing.

PLASTIC SLIDE FASTENER OPEN END MEDIUM SPECIAL DUTY WHITE 58CM. SPECIFICATION:- IS:14181(PART 1-3) 2002 REAFFIRMED-2013.AS PER RELEVANT CLAUSE OF SPECIFICATION.AS PER RELEVANT CLAUSE OF SPECIFICATION

PLASTIC SLIDE FASTENER OPEN END MEDIUM SPECIAL DUTY WHITE 58CM. SPECIFICATION:- IS:14181(PART 1-3) 2002 REAFFIRMED-2013.AS PER RELEVANT CLAUSE OF SPECIFICATION.AS PER RELEVANT CLAUSE OF SPECIFICATION

• as per attached list (Manufacturing Technology Files )

• as per attached list (Testing / Inspection Facility Files )

PLASTIC SLIDE FASTENERS HEAVY DUTY CLOSED END AUTO LOCK KHAKI 36 CM , SPECIFICATION NO. - IS:14181 (PART 1 TO 3) 2002 WITH AMENDMENT NO. 2, MARCH 2008

PLASTIC SLIDE FASTENERS HEAVY DUTY CLOSED END AUTO LOCK KHAKI 36 CM , SPECIFICATION NO. - IS:14181 (PART 1 TO 3) 2002 WITH AMENDMENT NO. 2, MARCH 2008

• ATTACHED

• ATTACHED

RIBBED CUFF WOOLLEN KHAKI 15X10 CMS CIT&C/TC-12/11

RIBBED CUFF WOOLLEN KHAKI 15X10 CMS CIT&C/TC-12/11

• as per attached list (Manufacturing Technology Files )

• as per attached list (Testing / Inspection Facility Files )

7107006009 MANUFACTURING AND SUPPLY OF SET OF STEEL CASTING ITEMS AS PER ANNEXURE STC2 FOR KAVACH MOD II

7107006009 MANUFACTURING AND SUPPLY OF SET OF STEEL CASTING ITEMS AS PER ANNEXURE STC2 FOR KAVACH MOD II

• (i) Foundry Facility for Aluminium Casting (ii) Heat Treatment Facility (iii) Conventional/CNC machining (iv) Surface Treatment In case tenderer is outsourcing any/some of the above activities, copy of agreement with such source shall be submitted. The foundry facility is mandatory.

• (i) Measuring Instruments/CMM & Gauges (ii) Radiography Testing facility duly certified by the Government (iii) Material Chemical & Physical facility with NABL accreditation Tenderer shall satisfy /declare the required inspection facilities are available either in house or outsourced.

Composite Barrier Non Woven Fabric 70GSM Width 160 CMS White( Clothing for Protection Against Contact With Blood And Body Fluids As per ISO: 16603

As per ISO: 16603

• Web Formation Technology
• Bonding Technology
• Lamination Tehnology

• Thickness
• Gram Per Square Meter
• Synthetic Blood Penetration Resistance Test

MANUFACTURING AND SUPPLY OF SET OF ALUMINIUM CASTING ITEMS AS PER ANNEXURE ALC1 FOR KAVACH MOD II

MANUFACTURING AND SUPPLY OF SET OF ALUMINIUM CASTING ITEMS AS PER ANNEXURE ALC1 FOR KAVACH MOD II

• 1) Foundry Facility for Aluminium Casting 2) Heat Treatment facility 3) Conventional/CNC machining 4) Surface Treatment

• 1) Measuring Instruments/CMM & Gauges 2) Radiography Testing facility duly certified by the Government 3) Material Chemical & Physical facility with NABL accreditation

PAPER & BOARD CORRUGATED AMMUNITION DOUBLE FACED FINE FLUTE TO SPECN NO. JSS:8135-08:2008 (REV. NO.3)CONFIRMING TO STD SIZE- 787 MM X 559 MM X 5 MM THICK.

PAPER & BOARD CORRUGATED AMMUNITION DOUBLE FACED FINE FLUTE TO SPECN NO. JSS:8135-08:2008 (REV. NO.3)CONFIRMING TO STD SIZE- 787 MM X 559 MM X 5 MM THICK.

• Manufacturing Technology : 1. Paper manufacturing plant 2. Rolling Machine 3. Cutting/Sizing facility

• Inspection Technology: Following test as per Drg./QAP/Spec 1. GSM testing facility 2.Chemical testing facility (Moisture content,PH of water extract, Water soluble chloride, Water soluble sulphate, Fatty acids, Ash content%, Matter soluble in ether)

MINE DRILL A.T.1A ND EMPTY WITHOUT FUZE DRILL MINE A/T 1C NDTO DES. REF. NO. CIA/AMN/2255, DRG. PT. NO. ITX 11 GEDC NO. 37050-A DTD 19/04/06,SPECN NO.CQA 1801(D) DC 37050-ADT.19/04/06.

MINE DRILL A.T.1A ND EMPTY WITHOUT FUZE DRILL MINE A/T 1C NDTO DES. REF. NO. CIA/AMN/2255, DRG. PT. NO. ITX 11 GEDC NO. 37050-A DTD 19/04/06,SPECN NO.CQA 1801(D) DC 37050-ADT.19/04/06.

• Manufacturing Technology : 1. Injection moulding 2. Heat Treatment 3.Hydraulic/Power press

• Inspection Technology: Following test as per Drg./QAP/Spec 1. n-heptane test 2. General purpose engineering equipment to measure dimensions like Micrometer, Vernier Caliper, Height Gauge.

POLYETHYLENE LAY FLAT TUBING LOW DENSITY TYPE I,SIZE 200 MMX 0.076 MM THICK TO SPECN. NO. JSS 9330-03:2014 (REV.03)

POLYETHYLENE LAY FLAT TUBING LOW DENSITY TYPE I,SIZE 200 MMX 0.076 MM THICK TO SPECN. NO. JSS 9330-03:2014 (REV.03)

• Manufacturing Technology : 1. Commercial product/polythene manufacturing plant

• Inspection Technology: Following test as per Drg./QAP/Spec 1. General purpose engineering equipment to measure dimensions like Micrometer, Vernier Caliper, Height Gauge.

SILICONE 17 COMPOUND (SILICONE GREASE). SPECN.IND/ME/989 (PROV) LATEST ISSUE

SILICONE 17 COMPOUND (SILICONE GREASE). SPECN.IND/ME/989 (PROV) LATEST ISSUE

• Manufacturing Technology : 1. Mixer 2. Filter

• Inspection Technology: Following test as per Drg./QAP/Spec 1. Specific gravity 2. Flash point 3. Lead % 4. Evaporation % 5.PH of water extract 6. Water soluble chlorides 7. Water soluble sulphates 8. compatibility with explosive 9. Penetration.

AMMUNITION PROTECTIVE COMPOSITION NO. 230 (CEMENT RD 1279, POLYSTYRENE CEMENT) TO SPECN. NO.JSS 8030-41:LATEST ISSUE

AMMUNITION PROTECTIVE COMPOSITION NO. 230 (CEMENT RD 1279, POLYSTYRENE CEMENT) TO SPECN. NO.JSS 8030-41:LATEST ISSUE

• Manufacturing Technology : 1. Mixer 2. Sieve

• Inspection Technology: Following test as per Drg./QAP/Spec 1. Volatile matter,% by mass 2.Drying time minutes 3. Adhesion test 4.Kinematic viscosity

CONNECTOR NO. CA 3981 FOR DETONATOR CABLE ELECTRIC 1B/L TODRG. PART NO. IQX 165 GF DC NO. 36953-A DT.10-03-04 ANDPVC SLEEVE INTERNAL DIAMETER 3.00 MM AND LENGTH 25 TO 30 MM

CONNECTOR NO. CA 3981 FOR DETONATOR CABLE ELECTRIC 1B/L TODRG. PART NO. IQX 165 GF DC NO. 36953-A DT.10-03-04 ANDPVC SLEEVE INTERNAL DIAMETER 3.00 MM AND LENGTH 25 TO 30 MM

• Manufacturing Technology : 1. Soldering 2. Multimeter

• Inspection Technology: Following test as per Drg./QAP/Spec 1. Continuity test 2. General purpose engineering equipment to measure dimensions like Micrometer, Vernier Caliper, Height Gauge.

COVER PART NO 1155764

AS PER PART A

• AS PER ANNEXURE L

• AS PER ANNEXURE L

METAL D/C FOR PLUG SNTS127-14S METAL D/C FOR PLUG SNTS127-14S MAKE-AMPHENOL

METAL D/C FOR PLUG SNTS127-14S METAL D/C FOR PLUG SNTS127-14S MAKE-AMPHENOL

METAL D/C FOR PLUG SNTS127-14S METAL D/C FOR PLUG SNTS127-14S MAKE-AMPHENOL

• ELECTRONIC ITEM

• ELECTRONIC ITEM

SET OF ELECTRONICS COMPONENTS Drg No.7194.03.00.190 SET OF ELECTRONICS COMPONENTS FOR POWER SUPPLY (+30V 12AMP) TO DRG. NO. 7194.03.00.190 CONTAINING 22 ITEMS AS PER ANNE XURE-C

SET OF ELECTRONICS COMPONENTS Drg No.7194.03.00.190 SET OF ELECTRONICS COMPONENTS FOR POWER SUPPLY (+30V 12AMP) TO DRG. NO. 7194.03.00.190 CONTAINING 22 ITEMS AS PER ANNE XURE-C

SET OF ELECTRONICS COMPONENTS Drg No.7194.03.00.190 SET OF ELECTRONICS COMPONENTS FOR POWER SUPPLY (+30V 12AMP) TO DRG. NO. 7194.03.00.190 CONTAINING 22 ITEMS AS PER ANNE XURE-C

• ELECTRONIC ITEMS

• ELECTRONIC ITEMS

SET OF ELECTRONICS COMP. P.SUP Drg No.7194.03.09.000 SET OF ELECTRONICS COMPONENTS FOR POWER SUPPLY (+/-15V &+5V) TO DRG. NO. 7194.03.09.000 CONTAINING 26 ITEMS AS PER ANNEXURE-D

SET OF ELECTRONICS COMP. P.SUP Drg No.7194.03.09.000 SET OF ELECTRONICS COMPONENTS FOR POWER SUPPLY (+/-15V &+5V) TO DRG. NO. 7194.03.09.000 CONTAINING 26 ITEMS AS PER ANNEXURE-D

SET OF ELECTRONICS COMP. P.SUP Drg No.7194.03.09.000 SET OF ELECTRONICS COMPONENTS FOR POWER SUPPLY (+/-15V &+5V) TO DRG. NO. 7194.03.09.000 CONTAINING 26 ITEMS AS PER ANNEXURE-D

• ELECTRONIC COMPONENT

• ELECTRONIC COMPONENT

COVER LF NO 7446101138

COVER LF NO 7446101138

9S831018

• MECHANICAL COMPONENT

• MECHANICAL COMPONENT

PLATE LF NO 7440801245

PLATE LF NO 7440801245

BG29.100

• MECHANICAL COMPONENT

• MECHANICAL COMPONENT

LEVER LF NO 7440205923

LEVER LF NO 7440205923

BL9.185.930

• MECHANICAL COMPONENT

• MECHANICAL COMPONENT

BODY LF NO 7440205827

BODY LF NO 7440205827

9S831.201

• MECHANICAL COMPONENT

• MECHANICAL COMPONENT

CHASIS LF NO 7440201456

CHASIS LF NO 7440201456

BV29.070

• MECHANICAL COMPONENT

• MECHANICAL COMPONENT

FRAME LF NO 7440201455

FRAME LF NO 7440201455

BV29.060

• MECHANICAL COMPONENT

• MECHANICAL COMPONENT

FRAME LF NO7440201451

FRAME LF NO7440201451

BV29.002

• MECHANICAL COMPONENT

• MECHANICAL COMPONENT

CHASSIS LF NO7440201446

CHASSIS LF NO7440201446

BG29-4S260

• MECHANICAL COMPONENT

• MECHANICAL COMPONENT

COVER LF NO 7440201430

COVER LF NO 7440201430

BG29026

• MECHANICAL COMPONENT

• MECHANICAL COMPONENT

FRAME LF NO 7440201426

FRAME LF NO 7440201426

BG29-4S003

• MECHANICAL COMPONENT

• MECHANICALCOMPONENT

FRAME LF NO 7440201425

FRAME LF NO 7440201425

BG29-4S003

• MECHANICAL COMPONENT

• MECHANICAL COMPONENT

BODY BG29-4S.240

BODY BG29-4S.240

BG29-4S.240

• MECHANICAL COMPONENT

• MECHANICAL COMPONENT

FORGING FOR BODY DRG NO 765-15-157 3

AS PER DRG NO 765-15-157 3

DRG NO 765-15-157 3

• AS PER DRG NO 765-15-157 3

• AS PER DRG NO 765-15-157 3

FORGING FOR DRIVE SHAFT DRG NO FG-765-15-152-3

AS PER DRG NO FG-765-15-152-3

DRG NO FG-765-15-152-3

• AS PER DRG NO FG-765-15-152-3

• AS PER DRG NO FG-765-15-152-3

FORGING FOR SUN GEAR FG-765-15-5-3

AS PER DRG FG-765-15-5-3

• AS PER DRG FG-765-15-5-3

• AS PER DRG FG-765-15-5-3

lock as per olf std 243

lock as per olf std 243

lock as per olf std 243

• AS PER OFB LETTER ANNXURE 1

• AS PER OFB LETTER ANNEXU8RE 1

CARRIER FORGING TO DRG NO 765 -15-156- 3

AS PER DRG NO 765 -15-156- 3

DRG NO 765 -15-156- 3

• AS PERDRG NO 765 -15-156- 3

• AS PER DRG NO 765 -15-156- 3

Bomb Assembly (Empty) for 500Kg GP Bomb

Bomb Assembly (Empty) for 500Kg GP Bomb

• uploaded

• uploaded

Rolling Ring Assembly for 500Kg GP Bomb

Rolling Ring Assembly for 500Kg GP Bomb

• UPLOADED

• Uploaded

SAND CASTING FOR COMP Y6213326 LF 9927098023

SAND CASTING FOR COMP Y6213326 LF 9927098023

B-23/SC/6213326/346

• MECHANICAL COMPONENT

• MECHANICAL COMPONENT

SAND CASTING FOR BODY TO DRG NO B-23/SC/7427436/237 M1 (LF 9927069535)

SAND CASTING FOR BODY TO DRG NO B-23/SC/7427436/237 M1 (LF 9927069535)

B-23/SC/7427436/237

• MECHANICAL COMPONENT

• MECHANICAL COMPONENT

Tape Nylon 15 mm BS 185 KG U/D

The Tape shall be in continuous length of 110 M (Excluding Sampling) Without Any Flag Otherwise That Roll Be Treated As Short Length. ADRDE/QMS/TGTE/T/2019/02 Date: 10/05/2019

• As per Specification/Drawing

• As per Specification/Drawing

SQUIB PLUG (BRIDGED) (EMPTY) FOR CONTAINER CLEANING CHARGE TO DRAWING NO ARDE 9707 00 01 0104 004 12TB FOR INFLUENCE MINE MK-II FILLING AND ASSEMBLY

SQUIB PLUG (BRIDGED) (EMPTY) FOR CONTAINER CLEANING CHARGE TO DRAWING NO ARDE 9707 00 01 0104 004 12TB FOR INFLUENCE MINE MK-II FILLING AND ASSEMBLY

• 1. Injection Moulding 2. Lathe 3. Drilling 4. Gold plating as per spec 5. Multimeter

• 1. Non- Continuity test(Multimeter) 2. Plating thickness 3. General Engineering Equipment for measurement

EMPTY ASSY OF DETONATOR ELECTRIC CONSISTING OF (A) DETONATOR TUBE ARDE DRG NO 9707 00 01 01 07 001 00TA (B) SQUIB PLUG EMPTY ARDE DRG NO 9707 00 01 01 07 002 12TBC PROTECTIVE CAP FOR SQUIB PLUG DETONATOR ARDE DRG NO 970700 01 01 07 003 12TA

EMPTY ASSY OF DETONATOR ELECTRIC CONSISTING OF (A) DETONATOR TUBE ARDE DRG NO 9707 00 01 01 07 001 00TA (B) SQUIB PLUG EMPTY ARDE DRG NO 9707 00 01 01 07 002 12TBC PROTECTIVE CAP FOR SQUIB PLUG DETONATOR ARDE DRG NO 970700 01 01 07 003 12TA

EMPTY ASSY OF DETONATOR ELECTRIC CONSISTING OF (A) DETONATOR TUBE ARDE DRG NO 9707 00 01 01 07 001 00TA (B) SQUIB PLUG EMPTY ARDE DRG NO 9707 00 01 01 07 002 12TBC PROTECTIVE CAP FOR SQUIB PLUG DETONATOR ARDE DRG NO 970700 01 01 07 003 12TA

• 1. Hydraulic/Mechanical Press 2. Injection Moulding 3. Multimeter 4. Lathe 5. Gold/Silver plating 6.Soldering 7.Drilling/Tapping

• 1. Electrical non-conductivity of pins 2. Plating thickness 3. Non-conductivity test 4. n-heptane test 5.Thread gauge 6. General Engineering Equipment for measurement

CONTAINER CLEARING CHARGE (EMPTY ASSY.) TO DRAWING NO. ARDE9707 00 01 01 17 000 00TA FOR INFLUENCE MINE MK-II - FILLINGAND ASSEMBLY.

CONTAINER CLEARING CHARGE (EMPTY ASSY.) TO DRAWING NO. ARDE9707 00 01 01 17 000 00TA FOR INFLUENCE MINE MK-II - FILLINGAND ASSEMBLY.

• Manufacturing Technology : 1. Injection Moulding 2. Air Tightness Test Apparatus 3. Multimeter 4. Lathe 5. Gold plating as per specn

• Inspection Technology 1. Non continuity test (Multimeter) 2. Air tightness Test 3. n-heptane test 4. Water Leakage test 5.Plating Thickness 6. General Engineering Equipment for measurement

PACKING BOX FOR SHAPED CHARGE 90MM CONSISTING OF10 COMPONENTS TO DRG NO. HE/CAST 086 DET 1 TO 10(EXCLUDING 90MM SHAPED CHARGE & SET OF LEGS) & QAP NO. HEMRL/HE/ADD/08/01 REV. 00 OF 09/2008

PACKING BOX FOR SHAPED CHARGE 90MM CONSISTING OF10 COMPONENTS TO DRG NO. HE/CAST 086 DET 1 TO 10(EXCLUDING 90MM SHAPED CHARGE & SET OF LEGS) & QAP NO. HEMRL/HE/ADD/08/01 REV. 00 OF 09/2008

• 1. Timber processing Unit (Cutting, Finishing,Polishing,Painting) 2. Pressure impregnation plant for preservative treatment (As per specification IA 948)

• 1. Jolt Test 2. Drop Test 3. Stacking test 4. Preservative penetration test 5.Dimensional checking facility 6. Moisture test

Slider Breech Block DRG No 0204 03 04 00 00 001 00DA for JVPC 5 56 mm MIM Route

Slider Breech Block DRG No 0204 03 04 00 00 001 00DA for JVPC 5 56 mm MIM Route

DRG No 0204 03 04 00 00 001 00DA for JVPC 5 56 mm MIM Route

• MIM ROUTE
• Chemical and mechanical properties as per std. given drawing.

• Chemical and mechanical properties as per std. given drawing.
• Dimensional inspection, for all dimensions given in the drawing and other parameter which are mentioned in relevant drawing.

LEVER CATCH MAGAZINE DRG NO. 0204 03 04 02 14 014 00DE FOR JVPC 5.56MM (MIM ROUTE)

DRG NO. 0204 03 04 02 14 014 00DE FOR JVPC 5.56MM

DRG NO. 0204 03 04 02 14 014 00DE FOR JVPC 5.56MM

• MIM ROUTE

• Chemical and mechanical properties as per std. given drawing.
• Dimensional inspection, for all dimensions given in the drawing and other parameter which are mentioned in relevant drawing.

Piece Guide for JVPC 5.56MM through MIM Route DRG. No. 0204 03 04 19 23 002 00DA

Piece Guide for JVPC 5.56MM through MIM Route DRG. No. 0204 03 04 19 23 002 00DA

0204 03 04 19 23 002 00DA

• MIM ROUTE

• Chemical and mechanical properties as per std. given drawing.
• Dimensional inspection, for all dimensions given in the drawing and other parameter which are mentioned in relevant drawing.

Rear sight Drg no. 0204 03 04 00 01 005 00DA for JVPC 5.56MM (MIM Route)

Rear sight Drg no. 0204 03 04 00 01 005 00DA for JVPC 5.56MM (MIM Route)

0204 03 02 00 01 005 00DD

• MIM ROUTE

• Chemical and mechanical properties as per std. given drawing.
• Dimensional inspection, for all dimensions given in the drawing and other parameter which are mentioned in relevant drawing.

P.C.B. DRG. NO: BL7.103.829 Drg No.BL7103829 P.C.B:-SMOTP DOUBLE SIDED PTH PCB AS PER DRG.NO:BL7.103 829 AND SPCN.NO:OLF/MSD/PCB/01/MOD ON GLASS EPOXY BOARD OF THICK 1.5 MM AND COPPER FOIL THICKNESS 50 MICRO MTR. CONFORMING TO JSS-52301. SIZE- 62 X 31.5 SQMM

P.C.B. DRG. NO: BL7.103.829 Drg No.BL7103829 P.C.B:-SMOTP DOUBLE SIDED PTH PCB AS PER DRG.NO:BL7.103 829 AND SPCN.NO:OLF/MSD/PCB/01/MOD ON GLASS EPOXY BOARD OF THICK 1.5 MM AND COPPER FOIL THICKNESS 50 MICRO MTR. CONFORMING TO JSS-52301. SIZE- 62 X 31.5 SQMM

P.C.B. DRG. NO: BL7.103.829 Drg No.BL7103829 P.C.B:-SMOTP DOUBLE SIDED PTH PCB AS PER DRG.NO:BL7.103 829 AND SPCN.NO:OLF/MSD/PCB/01/MOD ON GLASS EPOXY BOARD OF THICK 1.5 MM AND COPPER FOIL THICKNESS 50 MICRO MTR. CONFORMING TO JSS-52301. SIZE

• ELECTRONIC ITEM

• ELECTRONIC ITEM

P.C.B DRG.NO: BL7.102.504 Drg No.BL7102504 P.C.B:-SMOTP DOUBLE SIDED PTH PCB AS PER DRG.NO:BL7.102.504 AND SPCN.NO:OLF/MSD/PCB/01 ON GLASS EPOXY BOARD OF THICKNESS 1.5 MM AND COPPER FOIL THICKNESS 50 MICRO MTR. CONFORMING TO JSS-52301.

P.C.B DRG.NO: BL7.102.504 Drg No.BL7102504 P.C.B:-SMOTP DOUBLE SIDED PTH PCB AS PER DRG.NO:BL7.102.504 AND SPCN.NO:OLF/MSD/PCB/01 ON GLASS EPOXY BOARD OF THICKNESS 1.5 MM AND COPPER FOIL THICKNESS 50 MICRO MTR. CONFORMING TO JSS-52301.

P.C.B DRG.NO: BL7.102.504 Drg No.BL7102504 P.C.B:-SMOTP DOUBLE SIDED PTH PCB AS PER DRG.NO:BL7.102.504 AND SPCN.NO:OLF/MSD/PCB/01 ON GLASS EPOXY BOARD OF THICKNESS 1.5 MM AND COPPER FOIL THICKNESS 50 MICRO MTR. CONFORMING TO JSS-52301.

• ELECTRONIC ITEM

• ELECTRONIC ITEM

PRINTED CIRCUIT BOARD Drg No.IUMK.758713.004 MIL-PRF-55110G DOUBLE SIDED PCB (APPROX. SIZE 45 X 75 MM IN 1.5 MM THICKNESS ) TO DRG. NO. IUMK.758713.004

PRINTED CIRCUIT BOARD Drg No.IUMK.758713.004 MIL-PRF-55110G DOUBLE SIDED PCB (APPROX. SIZE 45 X 75 MM IN 1.5 MM THICKNESS ) TO DRG. NO. IUMK.758713.004

PRINTED CIRCUIT BOARD Drg No.IUMK.758713.004 MIL-PRF-55110G DOUBLE SIDED PCB (APPROX. SIZE 45 X 75 MM IN 1.5 MM THICKNESS ) TO DRG. NO. IUMK.758713.004

• ELECTRONIC ITEM

• ELECTRONIC ITEM

PRINTED CIRCUIT BOARD Drg No.IUMK.758713.004 MIL-PRF-55110G DOUBLE SIDED PCB (APPROX. SIZE 45 X 75 MM IN 1.5 MM THICKNESS ) TO DRG. NO. IUMK.758713.004

PRINTED CIRCUIT BOARD Drg No.IUMK.758713.004 MIL-PRF-55110G DOUBLE SIDED PCB (APPROX. SIZE 45 X 75 MM IN 1.5 MM THICKNESS ) TO DRG. NO. IUMK.758713.004

PRINTED CIRCUIT BOARD Drg No.IUMK.758713.004 MIL-PRF-55110G DOUBLE SIDED PCB (APPROX. SIZE 45 X 75 MM IN 1.5 MM THICKNESS ) TO DRG. NO. IUMK.758713.004

• ELECTRONIC ITEM

• ELECTRONIC ITEM

PRINTED CIRCUIT BOARD Drg No.AL7.103.195 MIL-PRF-55110G DOUBLE SIDED PCB (APPROX. SIZE 56.25 X 65 MM IN 1.5 MM THICKNESS ) TO DRG. NO. AL7.103.195

PRINTED CIRCUIT BOARD Drg No.AL7.103.195 MIL-PRF-55110G DOUBLE SIDED PCB (APPROX. SIZE 56.25 X 65 MM IN 1.5 MM THICKNESS ) TO DRG. NO. AL7.103.195

PRINTED CIRCUIT BOARD Drg No.AL7.103.195 MIL-PRF-55110G DOUBLE SIDED PCB (APPROX. SIZE 56.25 X 65 MM IN 1.5 MM THICKNESS ) TO DRG. NO. AL7.103.195

• ELECTRONIC ITEM

• ELECTRONIC ITEM

PRINTED CIRCUIT BOARD Drg No.AL7.102.794 MIL-PRF-55110G DOUBLE SIDED PCB (APPROX. SIZE 56.25 X 65 MM IN 1.5 MM THICKNESS ) TO DRG. NO. AL7.102.794

PRINTED CIRCUIT BOARD Drg No.AL7.102.794 MIL-PRF-55110G DOUBLE SIDED PCB (APPROX. SIZE 56.25 X 65 MM IN 1.5 MM THICKNESS ) TO DRG. NO. AL7.102.794

PRINTED CIRCUIT BOARD Drg No.AL7.102.794 MIL-PRF-55110G DOUBLE SIDED PCB (APPROX. SIZE 56.25 X 65 MM IN 1.5 MM THICKNESS ) TO DRG. NO. AL7.102.794

• ELECTRONIC ITEM

• ELECTRONIC ITEM

MIL-PRF-55110G DOUBLE SIDE PCB Drg No.BPV 29.005 MIL-PRF-55110G DOUBLE SIDED PCB OF SIZE 111X54MM(APPROX) IN THICKNESS OF 2.0MM(APPROX) TO DRG. NO.BPV 29.005 FOR BPV-29.

MIL-PRF-55110G DOUBLE SIDE PCB Drg No.BPV 29.005 MIL-PRF-55110G DOUBLE SIDED PCB OF SIZE 111X54MM(APPROX) IN THICKNESS OF 2.0MM(APPROX) TO DRG. NO.BPV 29.005 FOR BPV-29.

MIL-PRF-55110G DOUBLE SIDE PCB Drg No.BPV 29.005 MIL-PRF-55110G DOUBLE SIDED PCB OF SIZE 111X54MM(APPROX) IN THICKNESS OF 2.0MM(APPROX) TO DRG. NO.BPV 29.005 FOR BPV-29.

• ELECTRONIC ITEM

• ELECTRONIC ITEM