Firm to comply & submit documents in support that they are having their own Casting facilities with stress relieving facilities or mention that they will outsource the same (in case of outsourcing, the firm has to submit related agreement/MoU.
UNIT LOAD FOR 155 MM CHARGE 8 & 9 TO BOFORS DRG.No.4085565 AND 4085566 AND AS PER CFA DRG.No.13 S 002 INCORPORATING THE SUGGESTIONS OF CQA(A), KADKI, VIDE THEIR LETTER No.QA 17553/GEN/VIII DATED 30/03/1995.
DIETHYLPHTHALATE (SPECN : IND/ME/873(A): 2015 DC 5384-ME, DT.21.12.2015 ADDL.CLAUSE: COMPATIBILITY WITH NG, WHEN MIXED WITH NG THE DEP MUST NOT LOWER THE ABEL HEAT TEST OF NG.
ALUMINIUM STEARATE SPECN : IND/ME/970:2016 DCNO.5462-ME DT.01-06-2016 (A) RETENTION ON 150 MICRO METRE IS SIEVE MAX : 5.0% (B) RETENTION ON 75 MICRO METRE IS SIEVE MAX : 15%
METALLIC CONTAINERS FOR CHARGES 8 & 9 OF 155 MM AMMN SPECIFICATION CQA(AMMN) KIRKEE. DRG.NO.4085561 DC-35637-A DT.17.12.93 LEAK TEST AS PER SPECN.IA 1169 (N) DC 35707-A DT 05.05.94
DECOPPERING AGENT FOR 155 MM CHARGE 8 & 9 ( DS CAT NO:9535 - 000864 ) TO SPECN:IND/ME-971:2016), DC 5463-ME DATED 01.06.2016 & BOFORS DRG. NO:6 388 122 SIZE: 500 MM + OR - 5 MM X 100 MM + OR - 5 MM X 0.08 MM + 0.01 MM ( 0.08 TO 0.09 MM ) MASS 40 GRAMS + OR - 1 GRAM.
CLOTH COTTON DOWN TIGHT AS PER SPECN:IND/ME 1005 october 2012,DC 5105 ME DT.27-04-2013 COLOUR SIGNAL RED, AS PER COLOUR SHADE NO.537 OF IS:5-2007(SIXTH REVISION) (WIDTH: 1400 MM)
ACRYLIC RAYON CLOTH TO SPECN:IND/ME 973(A):2016 GRADE "B" DC 6009-ME DATED 03-02-17 (1.15-METER WIDTH FOR THE MANUFACTURE OF 155 MM AMMN. CHARGE 8 AND 9 PROPELLANT BAGS)
BLEACHED COTTON LINTERS SPECN: JSS 8305-14:2015 (REVISION NO.4) DC 6048-ME DT.08.06.2017 THE DYNAMIC VISCOSITY OF EACH SAMPLED BALE FROM A LOT SHALL BE WITHIN 20 TO 30 POISES. LOT SIZE IS APPROX. 6.0 TO 7.0 TONNE
FOIL TIN LEAD SPECN : JSS 9535-06:2010 (REV.NO.2) REAFFIRMED 2016 DC NO.6002-ME DT.24-09-2016 FOR THICKNESS 0.05MM SIZE OF THE STRIP-WIDTH-120MM, THICKNESS-0.05MM ANDLENGTH ADJUSTED TO 60 GRAM.
UNVARNISHED HOLLOW PAPER TUBE SIZE 800 MM LONG X 28 MM PLUS OR MINUS 1MM INTERNAL DIA,BOTH ENDS OPEN SPECN:CF 12.5 DT.17.1.95 WITH CORRECTION SLIP 12.5.1&12.5.2 CFA SKETCH NO.765 DATED. 2.12.88.
CAMBRIC COTTON DYED OLIVE GREEN 915 MM WIDE (36") IS COLOUR CODE 220 OF IS:5-2007 (SIXTH REVISION),RAF-2017 FOR OLIVE GREEN SPECIFICATION IS:5088-1982 (FIRST REVISION) WITH AMENDMENT NO.2 REAFFIRMED 2017(VARIETY NO.2)
CAMBRIC COTTON DYED SIGNAL RED 1117.6 MM (44") ISC COLOUR CODE 537 OF IS:5-2007 (Rev 6th,RAF 2017) FOR SIGNAL RED SPECN : IS:5088-1982 (FIRST REVISION) WITH AMENDMENT NO.2 REAFFIRMED 2017 (VARIETY NO.2)
CAMBRIC COTTON DYED AZURE BLUE 44" WIDE ISC NO:104OF IS:5/2007 FOR AZURE BLUE (SIXTH REVISION)RAF-2017 TO SPEN:IS: 5088 OF 1982 (FIRST REVISION) WITH AMENDMENT NO.2 REAFFIRMED 2017 (VARIETY NO.2)
CAMBRIC COTTON DYED SIGNAL RED 915 MM WIDE (36") ISC COLOUR CODE 537 OF IS: 5-2007 (SIXTH REVISION) FOR SIGNAL RED. SPECN:IS:5088 OF 1982(FIRST REVISION)WITH AMENDMENT NO.2 REAFFIRMED 2017 (VARIETY NO.2)
0611504008 ALUMINIUM ALLOY ROD PEELED & GROUND TO SPECN.IS-733-1983 DESIGNATION 24345 CONDITION 'W' WITHOUT PGG TO SIZE: 8 MM +/-0.05 WITH STRAIGHTNESS OF 0.3 MM PER METER HAVING LENGTH OF 02 - 03 METERS
Specification
0611504008 ALUMINIUM ALLOY ROD PEELED & GROUND TO SPECN.IS-733-1983 DESIGNATION 24345 CONDITION 'W' WITHOUT PGG TO SIZE: 8 MM +/-0.05 WITH STRAIGHTNESS OF 0.3 MM PER METER HAVING LENGTH OF 02 - 03 METERS
COPPER SHEET TO SPECIFICATION DPRLM 3M1 TY 48-21-664-79 (OR)IS 191 (PART 4):1980 (REAFFIRMATION 2006), GR CATHODE COPPER SIZE:- THICKNESS 5 (-0.26 MM) X WIDTH 60 (+2 MM) X 600 MM LONG
Specification
COPPER SHEET TO SPECIFICATION DPRLM 3M1 TY 48-21-664-79 (OR)IS 191 (PART 4):1980 (REAFFIRMATION 2006), GR CATHODE COPPER SIZE:- THICKNESS 5 (-0.26 MM) X WIDTH 60 (+2 MM) X 600 MM LONG
COPPER SHEET TO SPECIFICATION DPRLM 6 M1 TY 48-21-664-79 (OR) IS 191 (PART 4):1980 (REAFFIRMATION 2006), GR CATHODE COPPER SIZE:-THICKNESS 6 (-0.26 MM) X WIDTH 142 (+2 MM) X 600 MM LONG
Specification
COPPER SHEET TO SPECIFICATION DPRLM 6 M1 TY 48-21-664-79 (OR) IS 191 (PART 4):1980 (REAFFIRMATION 2006), GR CATHODE COPPER SIZE:-THICKNESS 6 (-0.26 MM) X WIDTH 142 (+2 MM) X 600 MM LONG
Drawing no.
Manufacturing Technology
Testing / Inspection Facility
07
As per requirement
Kilogram
6646
EOI/PROVISIONAL/REGULARIZATION
Ordnance Equipment Factory
The General Manager,
Kanpur
Kanpur
Kanpur, Uttar Pradesh
208001
BLANK FOR CARTRIDGE LIFT ( PAG-0054/B2) AS PER RFI SK-8974-BG FOR 12 BORE PUMP ACTION GUN. STEEL STRIP 167+ -0.2 X MULTIPLE OF 3000 MM. X 2.20-0.05 THICKNESS. MATERIAL :IS:2507-1975,50 CR4V2, ALT.MAT. :EN47
Specification
BLANK FOR CARTRIDGE LIFT ( PAG-0054/B2) AS PER RFI SK-8974-BG FOR 12 BORE PUMP ACTION GUN. STEEL STRIP 167+ -0.2 X MULTIPLE OF 3000 MM. X 2.20-0.05 THICKNESS. MATERIAL :IS:2507-1975,50 CR4V2, ALT.MAT. :EN47
“VEHICLE REAR VIEW CAMERA SYSTEM” CONSISTING OF LCD MONITOR CAMERA WITH NIGHT VISION CAPABILITY, CONNECTING CABLES AND ACCESSORIES FOR INSTALLATION AND ALONG WITH INSTALLATION GUIDE, OPERATING AND MAINTENANCE MANUAL AS PER SPECIFICATION OF ANNEXURE-A & DRG NO. 2689-57-31, 2713-57-31, 2714-57-31.
Rubber Sheet (10 mm THK) of BP SML for Trooper Floor, as per drg. Enclosed (1 set consisting of 4 rubber sheet) Drg No. 6005-47-41.Specific Gravity 1.4 to 1.5 shore hardness 55-65. in black colour.
Specification
Specific Gravity 1.4 to 1.5 shore hardness 55-65. in black colour.
CASES C-128 MK-13 (NEW) WITHOUT PARTITION AND GROOVES AS PER SPECN/DRG.
Specification
CASES C-128 MK-13 (NEW) WITHOUT PARTITION AND GROOVES AS PER SPECN/DRG. PARTICULARS GIVEN BELOW. DRAWING:IA 1031 DC 36234-A DT: 04-02-1997 AND SPECN: IA948 ( A,F ) DC 36081-A READ WITH AIDE MEMOIRE - W/4.
BAGS CALICO FOR 40 KG M.T PROPELLANTS MADE OUT OF CALICO CLOTH AND AS PER CFA DRG NO.1037 DATED 24.12.2013 SPECN-IS-5088-1982 (FIRST REV) WITH AMENDMENT NO.2 OCT 1996 REAFD 2017-FOR CLOTH
CALICO BAG TO CFA SKETCH NO: 932.DT.19.9.2001 WITH AMENDMENT NO.2 FOR BAG SPECN.IS-5088-1982 (FIRST REV) WITH AMENDMENT NO.2 OCT 1996 REAFD. 2017- FOR CLOTH
SPIRIT RECTIFIED TO SPECN IS: 323-2009 (II REVISION REAFFIRMED 2019 DC NO.5009-ME DT.07.01.2011 DENATURED WITH 0.5% OF ACETONE TO SPECN. IS: 4117/2008 (SECOND REVISION) REAFFIRMED 2019
CALCIUM CARBONATE FOR EXPLOSIVES TYPE II PRECIPITATED MATERIAL RETAINED ON 90 MICRON IS SIEVE - NIL (PERCENT BY MASS) FOR USE IN PROPELLANTS SPECN: IS 7633 - 1982 REAFFIRMED 2016. (FIRST REVISION) AMENDMENT NO. 1 DC 5372-ME DT.28-07-2015
COTTON SEWING THREAD 210 d TEX/2(28 S/2) SCOURED FOR AEROSPACE PURPOSES.(IN THE TUBE OF 1000 MTRS EACH)
Specification
SPECN. NO.: IS : 1376-1998 Except that :- i)In appearance Finish and other respects not defined in this Specn. the material shall conform to the corresponding sealed pattern held in the custody of the Controller, CQAT&C Kanpur. (ii) Sampling Plan & Criteria of conformity As per CQAT&C/QAI/TC-8/13. (III) ph Value should be 6.0 to 8.5 PACKING & MARKING : AS PER SCHEDULE NO. CQAT&C/PMS/36(a).
SPECN.NO. :AS PER FOLLOWING PARTICULARS.
a)Width 132 cms., (b)Thickness in mm at 200 gm/sq.cm 0.45,
(c)Weight/mt/Sq (in Gms) 107 Max.,(d) No. of mesh/Sq.inch- 140 ,(e) Tearing strength in kg.in both direction 3.2 min.(f)Bursting strength in kg. 11 kg. min, (g) B.S.in kg 5X20 cms strip length direction 40 min, width direction 24 min.
(h)Elongation at break length direction : 40%
width direction : 92.5 to 100%
SPECN-IS:4741-1965(Amdt-1.Reafirmed 2003) except for pull strength, which should be 4Kgf(Min). For Plastic Washer Thickness (under pressure 200g/cm squire) 1.14mm & Dia12.52 mm of best trade quality
Specification
IS:4741-1965(Amdt-1.Reafirmed 2003) except for pull strength, which should be 4Kgf(Min). For Plastic Washer Thickness (under pressure 200g/cm squire) 1.14mm & Dia12.52 mm of best trade quality
