Fabrication of Pant Drill Cotton Navy Blue for Chanda
Specification
FABRICATION OF PANT DRILL COTTON NAVY BLUE FOR CHANDA
SPECIFICATION:
SWO PART No. 20139/70139.
MAKE & SHAPE: AS PER APPROVED SAMPLE.
NOTE:
A) CUT COMPONENTS AND GARNITURES WILL BE SUPPLIED BY THE FACTORY.
B) DRAWING & SAMPLE WILL BE PROVIDED AT THE TIME OF FABRICATION.
Fabrication of Pant Drill Cotton Navy Blue with Patch Pocket
Specification
FABRICATION OF PANT DRILL COTTON NAVY BLUE WITH PATCH POCKET
SWO PART II No. 20064/70064.
SPECIFICATION:
MAKE & SHAPE: AS PER APPROVED SAMPLE.
NOTE:
A) CUT COMPONENTS AND GARNITURES WILL BE SUPPLIED BY THE FACTORY.
B) SAMPLE WILL BE PROVIDED AT THE TIME OF FABRICATION, IF REQUIRED.
Fabrication of Trouser Drill White Suit Danger Building for Khamaria
Specification
FABRICATION OF TROUSER DRILL WHITE SUIT DANGER BUILDING FOR KHAMARIA
SPECIFICATION:
SWO PART No. 20137.
NOTE:
A) CUT COMPONENTS AND GARNITURES WILL BE SUPPLIED BY THE FACTORY.
B) DRAWING & SAMPLE WILL BE PROVIDED AT THE TIME OF FABRICATION, IF REQUIRED.
Fabrication of Manila Shirt Drill Cotton Khaki Full Sleeve for AFK
Specification
FABRICATION OF MANILA SHIRT DRILL COTTON KHAKI FULL SLEEVE FOR AF KHADKI
SWO PART II No. 20150/70150.
SPECIFICATION:
MAKE & SHAPE: AS PER APPROVED SAMPLE.
NOTE:
A) CUT COMPONENTS AND GARNITURES WILL BE SUPPLIED BY THE FACTORY.
B) SAMPLE WILL BE PROVIDED AT THE TIME OF FABRICATION, IF REQUIRED.
Fabrication of Bush Shirt Drill Cotton Navy Blue Half Sleeve
Specification
FABRICATION OF BUSH SHIRT DRILL COTTON NAVY BLUE HALF SLEEVE
SWO PART II No. 20138/70138.
SPECIFICATION:
MAKE & SHAPE: AS PER APPROVED SAMPLE.
NOTE:
A) CUT COMPONENTS AND GARNITURES WILL BE SUPPLIED BY THE FACTORY.
B) SAMPLE WILL BE PROVIDED AT THE TIME OF FABRICATION, IF REQUIRED.
FABRICATION OF BUSH SHIRT DRILL NAVY BLUE (IFD)
SWO PART II No. 20063.
SPECIFICATION:
NOTE:
A) CUT COMPONENTS AND GARNITURES WILL BE SUPPLIED BY THE FACTORY.
B) DRAWING & SAMPLE WILL BE PROVIDED AT THE TIME OF FABRICATION, IF REQUIRED.
FABRICATION OF MANILA SHIRT DRILL COTTON NAVY BLUE FULL SLEEVES
Specification
FABRICATION OF MANILA SHIRT DRILL COTTON NAVY BLUE F/S.
SWO PART II No. 20149/70149.
SPECIFICATION:
NOTE:
CUT COMPONENTS AND GARNITURES WILL BE SUPPLIED BY THE FACTORY. SAMPLE WILL BE
PROVIDED AT THE TIME OF FABRICATION, IF REQUIRED.
FABRICATION OF MANILA SHIRT DRILL COTTON NAVY BLUE HALF SLEEVE
SWO PART II No. 20148/70148.
Specification
SWO PART II No. 20148/70148.
SPECIFICATION:
MAKE & SHAPE: AS PER APPROVED SAMPLE.
NOTE:
CUT COMPONENTS AND GARNITURES WILL BE SUPPLIED BY THE FACTORY. SAMPLE WILL BE PROVIDED AT THE TIME OF FABRICATION, IF REQUIRED.
HISTORY SHEET (BINDER COMPLETE).
HISTORY SHEET BOOK(BINDER COMPLETE) FOR DHANUSH COMPRISING-
1)BARREL/LINER HISTORY SHEET,
2)BREECH RING/JACKET HISTORY,
3)CARRIAGE/MOUNTING HISTORY,
4)DAILY RECORDS OF ROUND FIRED,
5)RECOIL SYSTEM HISTORY,
6)ELECTRONIC UPGRADATION,
7)BACKUP/DIAL SIGHT,FIRE DIRECT CONTROL SYS HISTORY.
Specification
HISTORY SHEET (BINDER COMPLETE).
HISTORY SHEET BOOK(BINDER COMPLETE) FOR DHANUSH COMPRISING-
1)BARREL/LINER HISTORY SHEET,
2)BREECH RING/JACKET HISTORY,
3)CARRIAGE/MOUNTING HISTORY,
4)DAILY RECORDS OF ROUND FIRED,
5)RECOIL SYSTEM HISTORY,
6)ELECTRONIC UPGRADATION,
7)BACKUP/DIAL SIGHT,FIRE DIRECT CONTROL SYS HISTORY.
STEEL ROUND 65MM DIA TO SPECN:BS:3S144-1995(1999) GRADE
S144D LFVD SULPHUR-0.015, PHOSPHOROUS-0.03 SECONDARY
REFINING STEEL AS PER SPECN:IS:4163-1982 INCLUSION RATING
SHOULD NOT EXCEES THE FOLLOWING:LFVD WITH CALCIUM SILICATE
TREATMENT. THIN/THICK SULPHIDE-1.5-1, ALUMINA.1.5-1,
GLOBULAR OXIDE 2.0-1,SILICATE 1.5-1.
Specification
STEEL ROUND 65MM DIA TO SPECN:BS:3S144-1995(1999) GRADE
S144D LFVD SULPHUR-0.015, PHOSPHOROUS-0.03 SECONDARY
REFINING STEEL AS PER SPECN:IS:4163-1982 INCLUSION RATING
SHOULD NOT EXCEES THE FOLLOWING:LFVD WITH CALCIUM SILICATE
TREATMENT. THIN/THICK SULPHIDE-1.5-1, ALUMINA.1.5-1,
GLOBULAR OXIDE 2.0-1,SILICATE 1.5-1.
Drawing no.
Manufacturing Technology
Testing / Inspection Facility
70
194
Kilogram
8097
190399GLPO
Gun Carriage Factory
The General Manager,
Jabalpur
Jabalpur
Jabalpur,Madhya Pradesh
482011
Plastic Button Reversible 19 mm in Matching printed pattern ( Thermosetting)
Specification
Plastic Button Reversible 19 mm in Matching printed pattern ( Thermosetting)
Specification No- IS:1461 1984(second Revision) reaffirmed 2003, Except that shape & design as per annexure "A" attached and feel & finish as per sample held in the custody of OCFS. As per relevant clause of supplementary schedule no. CQA(GS)/SS/346(b)
Drawing no.
Manufacturing Technology
as per attached list (Manufacturing Technology Files )
Mechanised stainless steel metal hooks and Clips with Base (press type) (item Code 1506420449)with specification : Mechanised stainless( steel metal hooks and Clips with Base (Press type) OPF Drawing No.OPF/CLO/IAF/TRS/01
Specification
Mechanised stainless steel metal hooks and Clips with Base (press type) (item Code 1506420449)with specification : Mechanised stainless( steel metal hooks and Clips with Base (Press type) OPF Drawing No.OPF/CLO/IAF/TRS/01
Drawing no.
Manufacturing Technology
Testing / Inspection Facility
15
581420
Set
8103
ORDFYS/OCFAV/1920/PV/03/078ADV1920 dt.27.01.2020
Ordnance Clothing Factory Avadi
The General Manager,
Avadi
Avadi
Avadi, Tamil Nadu
600054
Fabrication of Cap Drill Khaki (Suit Danger Building)
Specification
FABRICATION OF CAP DRILL KHAKI (SUIT DANGER BUILDING)
SWO PART II No. 02361/72361.
SPECIFICATION:
MAKE & SHAPE: AS PER APPROVED SAMPLE.
NOTE:
A) CUT COMPONENTS AND GARNITURES WILL BE SUPPLIED BY THE FACTORY.
B) SAMPLE WILL BE PROVIDED AT THE TIME OF FABRICATION, IF REQUIRED.
FABRICATION OF FLAME RETARDANT ACTION OVERALL FOR MSF
Specification
FABRICATION OF FLAME RETARDANT ACTION OVERALL FOR MSF
SWO PART II No. 20234/70234.
SPECIFICATION:
MAKE & SHAPE: AS PER APPROVED SAMPLE.
NOTE:
A) CUT COMPONENTS AND GARNITURES WILL BE SUPPLIED BY THE FACTORY.
B) SAMPLE WILL BE PROVIDED AT THE TIME OF FABRICATION, IF REQUIRED.
FABRICATION OF COAT LABORATORY
SWO PART II No. 20181/70181.
SPECIFICATION:
MAKE & SHAPE: AS PER APPROVED SAMPLE.
NOTE:
A) CUT COMPONENTS AND GARNITURES WILL BE SUPPLIED BY THE FACTORY.
B) SAMPLE WILL BE PROVIDED AT THE TIME OF FABRICATION, IF REQUIRED.
Fabrication of Overall Combination
Drill Khaki with Pivot Sleeves
Specification
FABRICATION OF OVERALL COMBINATION DRILL KHAKI WITH PIVOT SLEEVES.
SWO PART II No. 20198/70198.
SPECIFICATION:
MAKE & SHAPE: AS PER APPROVED SAMPLE.
NOTE:
CUT COMPONENTS AND GARNITURES WILL BE SUPPLIED BY THE FACTORY. SAMPLE WILL BE PROVIDED AT THE TIME OF FABRICATION, IF REQUIRED.
FABRICATION OF CAPS DANGER BUILDING WHITE PLAIN
SWO PART II No. 20173/70173.
Specification
SPECIFICATION:
MAKE & SHAPE: AS PER APPROVED SAMPLE.
SWO PART II No. 20173/70173.
NOTE:
CUT COMPONENTS AND GARNITURES WILL BE SUPPLIED BY THE FACTORY.
SAMPLE WILL BE PROVIDED AT THE TIME OF FABRICATION, IF REQUIRED.
WELDING ELECTRODES SIZE: 5 MM DEPOSITING 19 CR, 9 NI & 6MN & .40 MO STAINLESS STEEL WELD METAL, SPECIFICATION NO. CQA (M) 57 TO BE FOLLOWED FOR INSPECTION PROCEDURE OTHER THAN CHEMICAL COMPOSITION
Specification
CQA (M) 57 TO BE FOLLOWED FOR INSPECTION PROCEDURE OTHER THAN CHEMICAL COMPOSITION
WELDING ELECTRODES SIZE: 4 MM DEPOSITING 18 CR, 8 NI & 6MN STAINLESS STEEL WELD METAL, SPECN. CQA (M) 57-2013 TO BE FOLLOWED FOR INSPECTION PROCEDURE OTHER THAN CHEMICAL COMPOSITION
Specification
CQA (M) 57-2013 TO BE FOLLOWED FOR INSPECTION PROCEDURE OTHER THAN CHEMICAL COMPOSITION
Drawing no.
Manufacturing Technology
Testing / Inspection Facility
90
9338.50
Kilogram
8105
OCFC/COPPERSTOCKPILE/2020
Ordnance Cable Factory Chandigarh
The General Manager,
Chandigarh
Chandigarh
Chandigarh
160002
The firm is required to submit a list of complete Plant and Machinery required for the production of subject store and that are available with the firm. The firm shall also submit process flow diagram for the production of subject store. Details of facilities outsourced to be brought out clearly.
The firm is required to submit a list of complete Plant and Machinery required for the production of subject store and that are available with the firm. The firm shall also submit process flow diagram for the production of subject store. Details of facilities outsourced to be brought out clearly.
The firm is required to submit a list of complete Plant and Machinery required for the production of subject store and that are available with the firm. The firm shall also submit process flow diagram for the production of subject store. Details of facilities outsourced to be brought out clearly.
The firm is required to submit a list of complete Plant and Machinery required for the production of subject store and that are available with the firm. The firm shall also submit process flow diagram for the production of subject store. Details of facilities outsourced to be brought out clearly.
The firm is required to submit a list of complete Plant and Machinery required for the production of subject store and that are available with the firm. The firm shall also submit process flow diagram for the production of subject store. Details of facilities outsourced to be brought out clearly.
The firm is required to submit a list of testing equipments required for testing of subject store. The details of outsourced facilities to be brought out clearly.
The firm is required to submit a list of testing equipments required for testing of subject store. The details of outsourced facilities to be brought out clearly.
The firm is required to submit a list of testing equipments required for testing of subject store. The details of outsourced facilities to be brought out clearly.
The firm is required to submit a list of testing equipments required for testing of subject store. The details of outsourced facilities to be brought out clearly.
The firm is required to submit a list of testing equipments required for testing of subject store. The details of outsourced facilities to be brought out clearly.
70
6
Metric tonne(1000kg)
8106
OFMK/TM/OTE/V427719
Ordnance Factory Medak
The General Manager
Yeddumailaram, Medak District
Medak
Telangana
502205
COPPER TUBE 35mm +0.2 O/D X2.5 mm +/- 0.3 WALL THICKNESS X1.5 TO 3 MTRS LONG SPEC: JSS 4710-01:1988, GR. 1 IN EXTRUDED AND DRAWN CONDN. TEST PIECE DRAWN FROM THE BULK TO BE TESTED IN "0" COND. TO ACHIEVE MECHANICAL PROPERTIES : TS-185 TO 250 N/mmsq, ELONGATION %: -40min, HARDNESS: 55 HV MAX )
Specification
COPPER TUBE 35mm +0.2 O/D X2.5 mm +/- 0.3 WALL THICKNESS X1.5 TO 3 MTRS LONG SPEC: JSS 4710-01:1988, GR. 1 IN EXTRUDED AND DRAWN CONDN. TEST PIECE DRAWN FROM THE BULK TO BE TESTED IN "O" COND. TO ACHIEVE MECHANICAL PROPERTIES : TS-185 TO 250 N/SQMM, ELONGATION %: -40min, HARDNESS: 55 HV MAX )
OBTURATING COPPER BAND 149mm +0.7 MM O/DX 13 mm +2.00 mm WALL THICK X STANDARD LENGTH TO SPECN. IS: 2501-72, FRTP-1. ANNEALED WITH OXYGEN 0.07% MAX. AND UTS: 20 KG/mm (MIN)
Specification
OBTURATING COPPER BAND 149mm +0.7 MM O/DX 13 mm +2.00 mm WALL THICK X STANDARD LENGTH TO SPECN. IS: 2501-72, FRTP-1. ANNEALED WITH OXYGEN 0.07% MAX. AND UTS: 20 KG/mm (MIN)
OBTURATING COPPER BAND 149mm +0.7 MM O/DX 13 mm +2.00 mm WALL THICK X STANDARD LENGTH TO SPECN. IS: 2501-72, FRTP-1. ANNEALED WITH OXYGEN 0.07% MAX. AND UTS: 20 KG/mm (MIN)
Specification
OBTURATING COPPER BAND 149mm +0.7 MM O/DX 13 mm +2.00 mm WALL THICK X STANDARD LENGTH TO SPECN. IS: 2501-72, FRTP-1. ANNEALED WITH OXYGEN 0.07% MAX. AND UTS: 20 KG/mm (MIN)
STEEL ROUND 30.10 MM DIA ( TOL. GRADE h8) TO SPCN 53 X M1-0 TY-14-1-2232-77 & OST B 84-748-81, ANNEALED AND PEELED CONDITION TO 2.50 MTRS TO 3.00 MTRS IN STRAIGHT LENGTH. LONG STRAIGHTNESS OF ROD : 0.35 mm OR LESS PER 1000 MM. SHORT STRAIGHTNESS :0.1MM OR LESS PER 300 MM. RODS REQD TO 100% US TEST AS PER OST B-84-748-81.
Specification
STEEL ROUND 30.10 MM DIA ( TOL. GRADE h8) TO SPCN 53 X M1-0 TY-14-1-2232-77 & OST B 84-748-81, ANNEALED AND PEELED CONDITION TO 2.50 MTRS TO 3.00 MTRS IN STRAIGHT LENGTH. LONG STRAIGHTNESS OF ROD : 0.35 mm OR LESS PER 1000 MM. SHORT STRAIGHTNESS :0.1MM OR LESS PER 300 MM. RODS REQD TO 100% US TEST AS PER OST B-84-748-81.
