BALL BEARING S/R 3X7X2.5MM, L.F.NO.9927081741

BALL BEARING S/R 3X7X2.5MM, L.F.NO.9927081741

• BEARINGS

• BEARINGS

BEARING 5-1006, L.F.NO.7440201326

BEARING 5-1006, L.F.NO.7440201326

• BEARIN

• BEARING

BALL BEARING S/R 17X35X8MM L.F.NO.2051190104

BALL BEARING S/R 17X35X8MM L.F.NO.2051190104

• BEARINGS

• BEARINGS

S/R BALL BEARINGS SIZE 50X65X7 , L.F.NO.2051130005

S/R BALL BEARINGS SIZE 50X65X7 , L.F.NO.2051130005

• BEARINGS

• BEARINGS

BALL BEARING G-10058-75 AS PAR LF NO 2051100033

BALL BEARING G-10058-75 AS PAR LF NO 2051100033

• BEARING

• BEARING

BALL BEARINGS S/R SIZE 2X6X2.3MM , L.F.NO.9927081752

BALL BEARINGS S/R SIZE 2X6X2.3MM , L.F.NO.9927081752

• BEARINGS

• BEARINGS

BALL BEARING S R 10X22X6MM LF NO 9927081746

BALL BEARING S R 10X22X6MM LF NO 9927081746

• BEARINGS

• BEARINGS

BEARING 5-1000084 TO ETU100/3 L.F.NO.2051250017

BEARING 5-1000084 TO ETU100/3 L.F.NO.2051250017

• BEARINGS

• BEARINGS

BALL BEARING S/R 17X30X7 MM LF NO 2051190103

BALL BEARING S/R 17X30X7 MM LF NO 2051190103

• BEARINGS

• BEARINGS

SINGLE ROW BALL BEARING 10X26X8MM LF NO 2051100101

SINGLE ROW BALL BEARING 10X26X8MM LF NO 2051100101

• BEARINGS

• BEARINGS

SINGLE ROW BALL BEARING 6X19X6 LF NO 2051100004

SINGLE ROW BALL BEARING 6X19X6 LF NO 2051100004

• YES

• YES

STAYGUN TODRG NO IAN 52 A

STAYGUN TODRG NO IAN 52 A

• STAYGUN TODRG NO IAN 52 A

• STAYGUN TODRG NO IAN 52 A

PIPE REGULATING VALVE CYLINDER TO DRG NO IAN 90 SA

PIPE REGULATING VALVE CYLINDER TO DRG NO IAN 90 SA

• PIPE REGULATING VALVE CYLINDER TO DRG NO IAN 90 SA

• PIPE REGULATING VALVE CYLINDER TO DRG NO IAN 90 SA

PIPE EXHAUST TRAVERING VSG CROSS COUPLING IAN 194 SA TO DRG NO N15 13 6099821

PIPE EXHAUST TRAVERING VSG CROSS COUPLING IAN 194 SA TO DRG NO N15 13 6099821

• PIPE EXHAUST TRAVERING VSG CROSS COUPLING IAN 194 SA TO DRG NO N15 13 6099821

• PIPE EXHAUST TRAVERING VSG CROSS COUPLING IAN 194 SA TO DRG NO N15 13 6099821

PIPE OIL TANK CYLINDER AXLE RAISING FRONT IAN 89 SA TO DRG N15 21 6103020

PIPE OIL TANK CYLINDER AXLE RAISING FRONT IAN 89 SA TO DRG N15 21 6103020

• PIPE OIL TANK CYLINDER AXLE RAISING FRONT IAN 89 SA TO DRG N15 21 6103020

• PIPE OIL TANK CYLINDER AXLE RAISING FRONT IAN 89 SA TO DRG N15 21 6103020

PIPE CHANGEOVER VALVE TO DRG NO IAN 248 SA

PIPE CHANGEOVER VALVE TO DRG NO IAN 248 SA

• PIPE CHANGEOVER VALVE TO DRG NO IAN 248 SA

• PIPE CHANGEOVER VALVE TO DRG NO IAN 248 SA

PIPE MAIN PRESSURE LEFT BREATHER T COPUPLING FRONT BREATHER DRG NO IAN 196 SA

PIPE MAIN PRESSURE LEFT BREATHER T COPUPLING FRONT BREATHER DRG NO IAN 196 SA

• PIPE MAIN PRESSURE LEFT BREATHER T COPUPLING FRONT BREATHER DRG NO IAN 196 SA

• PIPE MAIN PRESSURE LEFT BREATHER T COPUPLING FRONT BREATHER DRG NO IAN 196 SA

PIPE HAND PUMP OIL TANK IAN 98 SA

PIPE HAND PUMP OIL TANK IAN 98 SA

• PIPE HAND PUMP OIL TANK IAN 98 SA

• PIPE HAND PUMP OIL TANK IAN 98 SA

PIPE REGU VALVE OIL TANK IAN 92 SA

PIPE REGU VALVE OIL TANK IAN 92 SA

• PIPE REGU VALVE OIL TANK IAN 92 SA

• PIPE REGU VALVE OIL TANK IAN 92 SA

PIPE REGULATING VALVE H PUMP ASSY

PIPE REGULATING VALVE H PUMP ASSY

• PIPE REGULATING VALVE H PUMP ASSY

• PIPE REGULATING VALVE H PUMP ASSY

MANUFACTURING AND SUPPLY OF FULL FINISHED COMPONENT COVER RECEIVER TO DRG NO K 1025

MANUFACTURING AND SUPPLY OF FULL FINISHED COMPONENT COVER RECEIVER TO DRG NO K 1025

K 1025

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

14.5 mm Bolt Assembly as per drawing 44P 14000

14.5 mm Bolt Assembly as per drawing 44P 14000

44P 14000

• Machining
• Assembly

• inspection at oft premises by General manager OFT / Authorized representatives
• Dimensional
• Chemical

SET HARNESS TYPE SDM 4.12 M THROUGH TRADE ASSISTANCE

SPECN-IND/TC/2550(b)

• As Per Specification

• As Per Specification

SET HARNESS TYPE SDM 6.10 M THROUGH TRADE ASSISTANCE

SPECN-IND/TC/2550(b)

• As per Specification

• As per Specification

FABRICATION OF PONCHO GLACIER

As per Drawing/ Technical particulars enclosed

• As per Drawing/ Technical particulars enclosed

• As per Drawing/ Technical particulars enclosed

SWIVEL CONE WITH PLATE

DRG.NO.:ADRDE/1321(b) DRD/60/98.

• As Per Drawing/Specification enclosed

• As Per Drawing/Specification enclosed

CONNECTING LUG OF AUXILIARY PARACHUTE

DRG.NO.:ADRDE/1301 (a) DRD/43/98.

• As Per Drawing/Specification enclosed

• As Per Drawing/Specification enclosed

ADJUSTABLE BUCKLE

DRG.NO.:ADRDE/1304 (a) DRD/46/98.

DRG.NO.:ADRDE/1304 (a) DRD/46/98.

• As Per Drawing/Specification enclosed

• As Per Drawing/Specification enclosed

NYLON RIP CORD WITH PIN

SPECIFICATION NO :ADRDE/309(a)

• As Per Drawing/Specification enclosed

• As Per Drawing/Specification enclosed

SHOCK ABSORBER TO DRAWING.NO.1160278

SHOCK ABSORBER TO DRAWING.NO.1160278

• AS PER ANNEXURE L

• AS PER ANNEXURE L

TRAIL LOCKING BAR LEFT & RIGHT TO PART NO. 1147189, AS PER ANNEXURE NO. DHANUSH/1147189/2017.

TRAIL LOCKING BAR LEFT & RIGHT TO PART NO. 1147189, AS PER ANNEXURE NO. DHANUSH/1147189/2017.

for detail specification,drawings, term and condition please visit ofb eproc portal.

• AS PER ANNEXURE L

• AS PER ANNEXURE L

SAFE & ARM DEVICE (SAD) FOR ARTILLARY FUZE AS PER ODC/MTPF DRG NO. 770-13-21-00

SAFE & ARM DEVICE (SAD) FOR ARTILLARY FUZE AS PER ODC/MTPF DRG NO. 770-13-21-00

• as per attachment

• as per attachment

PIN GUIDE TO CQA (A) DRG. NO. 13143-0-0 (AS PER DC NO. 36804-A DATED 01/01/2002)

PIN GUIDE TO CQA (A) DRG. NO. 13143-0-0 (AS PER DC NO. 36804-A DATED 01/01/2002)

• as per attachment

• as per attachment

CUSHION DETONATOR RETAINING TO CQA (A) DRG. NO. 13153-0-0 (AS PER DC NO. 36804-A DATED 01/01/2002)

CUSHION DETONATOR RETAINING TO CQA (A) DRG. NO. 13153-0-0 (AS PER DC NO. 36804-A DATED 01/01/2002)

• as per attachment

• as per attachment

CASE CARRYING SNV 5.56 MM LMG(INSAS) TO DRG. NO. MCT-2015/3 , COMPLETE,CASE CARRYING SNV 5.56MM LMG(INSAS) 101A TO DRG.NO.:MCT-2015/3 (COMPLETE) CONSISTING OF MCT-1369,MCT-1370,MCT-1375, MCT-1376,MCT-1380,MCT-1617/1,MCT-1636/1, MCT-1637/1, MCT-1641/1,MCT-1644/1,MCT-1646/1, MCT-1679/1, MCT-1680/1, MCT-2007,MCT-2008, MCT-2547/1 & MCT-2549/1.

CASE CARRYING SNV 5.56 MM LMG(INSAS) TO DRG. NO. MCT-2015/3 , COMPLETE,CASE CARRYING SNV 5.56MM LMG(INSAS) 101A TO DRG.NO.:MCT-2015/3 (COMPLETE) CONSISTING OF MCT-1369,MCT-1370,MCT-1375, MCT-1376,MCT-1380,MCT-1617/1,MCT-1636/1, MCT-1637/1, MCT-1641/1,MCT-1644/1,MCT-1646/1, MCT-1679/1, MCT-1680/1, MCT-2007,MCT-2008, MCT-2547/1 & MCT-2549/1.

CASE CARRYING SNV 5.56 MM LMG(INSAS) TO DRG. NO. MCT-2015/3 , COMPLETE,CASE CARRYING SNV 5.56MM LMG(INSAS) 101A TO DRG.NO.:MCT-2015/3 (COMPLETE) CONSISTING OF MCT-1369,MCT-1370,MCT-1375, MCT-1376,MCT-1380,MCT-1617/1,MCT-1636/1, MCT-1637/1, MCT-1641/1

• NOT MENTIONED IN ANNEXURE

• NOT MENTIONED IN ANNEXURE

Case Carrying FRP IRDE 2610

Case Carrying FRP IRDE 2610

• NOT MENTIONED IN ANNEXURE

• NOT MENTIONED IN ANNEXURE

ST SQR.75 MM TO SPECN.BS:3S144:1995(1999)GD S144H LFVD WITH CAL.SILICIDE TREATMENT.INCLUSION RATINGCHART SECONDARY REFINING STEEL AS PER SPECN.IS:4163-82,i.e.THN/THK SULPHIDE:1.5-1,ALUMINA:1.5-1,SILICATE:1.5-1,GLOBULAR OXIDE: 2.0-1.

ST SQR.75 MM TO SPECN.BS:3S144:1995(1999)GD S144H LFVD WITH CAL.SILICIDE TREATMENT.INCLUSION RATINGCHART SECONDARY REFINING STEEL AS PER SPECN.IS:4163-82,i.e.THN/THK SULPHIDE:1.5-1,ALUMINA:1.5-1,SILICATE:1.5-1,GLOBULAR OXIDE: 2.0-1.

• AS PER TENDER DOCUMENT ANNEXURE L

• AS PER TENDER DOCUMENT ANNEXURE L

Mandrel Assy Drg No VMT SK 119 10000 11 for Winding Machine 125 mm SCCC as per part list 5 sheets drgs and scope of work enclosed

Mandrel Assy Drg No VMT SK 119 10000 11 for Winding Machine 125 mm SCCC as per part list 5 sheets drgs and scope of work enclosed

Drg No VMT SK 119 10000 11

• Firm must submit the details of Manufacturing Technologies and Inspection/Testing Facilities available with the firm for manufacturing the subject items. . Quality assurance plan (IF ANY) related to production and inspection to be submitted in technical bid. List of Plant & Machineries required for manufacturing of subject item to be submitted.

• Firm must submit the details of Manufacturing Technologies and Inspection/Testing Facilities available with the firm for manufacturing the subject items. . Quality assurance plan (IF ANY) related to production and inspection to be submitted in technical bid. List of Plant & Machineries required for manufacturing of subject item to be submitted.

LOWER HAND GUARD BAND AS PER DRG NO MIM K 1204 01 TAR

LOWER HAND GUARD BAND AS PER DRG NO MIM K 1204 01 TAR

MIM-K-1204-01 (TAR)

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

CLEANING ROD FOR SIDE FOLDABLE BUTT AS PER DRG NO K 9011STR WITH FIRMS MATERIAL

CLEANING ROD FOR SIDE FOLDABLE BUTT AS PER DRG NO K 9011STR WITH FIRMS MATERIAL

K 9011STR

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

COMPENSATOR AS PER DRG. NO. MIM - K -1021- 01 (TAR)

COMPENSATOR AS PER DRG. NO. MIM - K -1021- 01 (TAR)

K 1021

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

SUPPLY OF HAMMER AS PER DRG NO K 2061 STAR2 WITH FIRMS MATERIAL

SUPPLY OF HAMMER AS PER DRG NO K 2061 STAR2 WITH FIRMS MATERIAL

K 2061 STAR2

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

BULLET GUIDE AS PER DRG NO TEND 2570 STAR WITHOUT HEAT TREATMENT AND PHOSPHATING FOR TRICHY ASSAULT RIFLE

BULLET GUIDE AS PER DRG NO TEND 2570 STAR WITHOUT HEAT TREATMENT AND PHOSPHATING FOR TRICHY ASSAULT RIFLE

TEND-2570*

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

TANK ASSY DRG NO VMT SK 119 8000 10 FOR WINDING MACHINE 125MM SCCC AS PER PART LIST ENCLOSED

TANK ASSY DRG NO VMT SK 119 8000 10 FOR WINDING MACHINE 125MM SCCC AS PER PART LIST ENCLOSED

VMT SK 119 8000 10

• Firm must submit the details of Manufacturing Technologies and Inspection/Testing Facilities available with the firm for manufacturing the subject items. Quality assurance plan (IF ANY) related to production and inspection to be submitted in technical bid. List of Plant & Machineries required for manufacturing of subject item to be submitted.

• Firm must submit the details of Manufacturing Technologies and Inspection/Testing Facilities available with the firm for manufacturing the subject items. Quality assurance plan (IF ANY) related to production and inspection to be submitted in technical bid. List of Plant & Machineries required for manufacturing of subject item to be submitted.

COVER AND PLATE BRAZING TO DS CAT NO. 1005-560621 WITH COVER ,DS CAT NO. 1005-560561 & PLATE REAR COVER DS.CAT.NO. 9515-0 13296 FOR MG 5.56MM 1A1 IN FINISHED CONDITION DC(I) NO. 26608-SA, DT. 07-02-12

COVER AND PLATE BRAZING TO DS CAT NO. 1005-560621 WITH COVER ,DS CAT NO. 1005-560561 & PLATE REAR COVER DS.CAT.NO. 9515-0 13296 FOR MG 5.56MM 1A1 IN FINISHED CONDITION DC(I) NO. 26608-SA, DT. 07-02-12

,DS CAT NO. 1005-560561

• Machining & Assy.

• As per attachment of manufacturing and technology

HAMMER DRG NO SK3143/71 (DS CAT NO.1005-008003) FOR LMG 5.56MM IN FINISHED CONDITION FORGING TO BE SUPPLIED BY SAF AGAINST L.F.0412079014. DC NO.26922-SA, DT.29.08.16.”

HAMMER DRG NO SK3143/71 (DS CAT NO.1005-008003) FOR LMG 5.56MM IN FINISHED CONDITION FORGING TO BE SUPPLIED BY SAF AGAINST L.F.0412079014. DC NO.26922-SA, DT.29.08.16.”

• Machining & Assy.

• As per attached manufacturing document

PROTECTIVE GEAR AS PER THE DESCRIPTION AND BILL OF MATERIAL (enclosed) PART NO 1156272D.

PROTECTIVE GEAR AS PER THE DESCRIPTION AND BILL OF MATERIAL (enclosed) PART NO 1156272D.

• As per Annexure L

• As per Annexure L

LAYER STATION ASSEMBLY PART NO.1156269

LAYER STATION ASSEMBLY PART NO.1156269

1156269

• AS PER ANNEXURE L

• AS PER ANNEXURE L

ALUMINIUM ALLOY STRIP TO SPECN. EN AW 2014 IN T6 CONDITION SIZE : 3.5+0.15 MM THICK X 1 MTR WIDTH X 2.5 MTR LENGTH

ALUMINIUM ALLOY STRIP TO SPECN. EN AW 2014 IN T6 CONDITION SIZE : 3.5+0.15 MM THICK X 1 MTR WIDTH X 2.5 MTR LENGTH

• as per attachment

• as per attachment

STEEL ROD 32.00MM DIA-0.1MM HOT ROLLED PEELED BAR IN EXACT LENGTH OF 760MM +2MM EACH PIECE TO SPECN.BS 970 PT:1:1983. GD 835 M15 WITH RESTRICTION OF S%=0.01 MAX,P%=0.015MA X,(S+P)%=0.022MAX,VACUAM DEGASED & DEVOID OF UNDESIRABLE ELEMENT AL.,V,W ETC. ACCEPTANCE CRITERIAS PER:QAINO.QA-1/QAI/15

STEEL ROD 32.00MM DIA-0.1MM HOT ROLLED PEELED BAR IN EXACT LENGTH OF 760MM +2MM EACH PIECE TO SPECN.BS 970 PT:1:1983. GD 835 M15 WITH RESTRICTION OF S%=0.01 MAX,P%=0.015MA X,(S+P)%=0.022MAX,VACUAM DEGASED & DEVOID OF UNDESIRABLE ELEMENT AL.,V,W ETC. ACCEPTANCE CRITERIAS PER:QAINO.QA-1/QAI/15

• Melting and Rolling

• 1) Chemical & Mechanical properties as per std. given drawing /Specification. 2) Dimensional inspection for all dimension given in the drawing & other parameter which are mentioned in relevant drawing/specification.

PREMACHINED BLANK AS PER DRG NO TEND 2616 STAR 3 FOR TAR TRUNNION

PREMACHINED BLANK AS PER DRG NO TEND 2616 STAR 3 FOR TAR TRUNNION

TEND 2616 STAR 3

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

REAR SIGHT LEAF AS PER DRG NO MIM K 2021 01 TAR

REAR SIGHT LEAF AS PER DRG NO MIM K 2021 01 TAR

MIM-K-2021-01 (TAR)

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

Stock Fore End to Drawing No 29P 0033STR3 Required for 0POINT315 sporting Rifle

Stock Fore End to Drawing No 29P 0033STR3 Required for 0POINT315 sporting Rifle

29P 0033STR3

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

SELECTOR LEVER AS PER DRG NO TEND 2573 STAR 3 WITHOUT HEAT TREATMENT AND PHOSPHATING FOR TRICHY ASSAULT RIFLE

SELECTOR LEVER AS PER DRG NO TEND 2573 STAR 3 WITHOUT HEAT TREATMENT AND PHOSPHATING FOR TRICHY ASSAULT RIFLE

TEND-2573*3

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

ALUMINIUM ALLOY AL ZN 4, 5 MG 1F 35 DIN 1725/1 SPECN.EXTRUDED HOLLOW PROFILE IN LENGTH OF 4850 +20MM FOR KERB AS PER DRG.NO.VLW 31416 & SCOPE OF SUPPLY AS PER ANNEXURE 'B'"

ALUMINIUM ALLOY AL ZN 4, 5 MG 1F 35 DIN 1725/1 SPECN.EXTRUDED HOLLOW PROFILE IN LENGTH OF 4850 +20MM FOR KERB AS PER DRG.NO.VLW 31416 & SCOPE OF SUPPLY AS PER ANNEXURE 'B'"

DRG.NO.VLW 31416

• Please refer attachment

• Please refer attachment

CENTER ASSY DRG NO VMT SK 119 16000 12 FOR WINDING MACHINE 125MM SCCC AS PER PART LIST ENCLOSED Qty 01 Set

CENTER ASSY DRG NO VMT SK 119 16000 12 FOR WINDING MACHINE 125MM SCCC AS PER PART LIST ENCLOSED Qty 01 Set

• Firm must submit the details of Manufacturing Technologies and Inspection/Testing Facilities available with the firm for manufacturing the subject item. Quality assurance plan (IF ANY) related to production and inspection to be submitted in technical bid. List of Plant & Machineries required for manufacturing of subject item to be submitted.

• Firm must submit the details of Manufacturing Technologies and Inspection/Testing Facilities available with the firm for manufacturing the subject item. Quality assurance plan (IF ANY) related to production and inspection to be submitted in technical bid. List of Plant & Machineries required for manufacturing of subject item to be submitted.

CUTTER UNIT ASSY. DRG. NO. VMT-SK-119-11000-10. FOR WINDING MACHINE 125MM SCCC (AS PER PART LIST ENCLOSED, Qty: 01 Set

CUTTER UNIT ASSY. DRG. NO. VMT-SK-119-11000-10. FOR WINDING MACHINE 125MM SCCC (AS PER PART LIST ENCLOSED, Qty: 01 Set

VMT-SK-119-11000-10

• Firm must submit the details of Manufacturing Technologies and Inspection/Testing Facilities available with the firm for manufacturing the subject item. Quality assurance plan (IF ANY) related to production and inspection to be submitted in technical bid. List of Plant & Machinery required for manufacturing of subject item to be submitted.

• Firm must submit the details of Manufacturing Technologies and Inspection/Testing Facilities available with the firm for manufacturing the subject item. Quality assurance plan (IF ANY) related to production and inspection to be submitted in technical bid. List of Plant & Machinery required for manufacturing of subject item to be submitted.

SETTING ROLLER ASSY. DRG. NO. VMT-SK 119-14000-10. FOR WINDING MACHINE 125MM SCCC (AS PER PARTLIST ENCLOSED), Qty: 01 Set

SETTING ROLLER ASSY. DRG. NO. VMT-SK 119-14000-10. FOR WINDING MACHINE 125MM SCCC (AS PER PARTLIST ENCLOSED), Qty: 01 Set

DRG. NO. VMT-SK 119-14000-10

• Firm must submit the details of Manufacturing Technologies and Inspection/Testing Facilities available with the firm for manufacturing the subject item. Quality assurance plan (IF ANY) related to production and inspection to be submitted in technical bid. List of Plant & Machineries required for manufacturing of subject item to be submitted.

• Firm must submit the details of Manufacturing Technologies and Inspection/Testing Facilities available with the firm for manufacturing the subject item. Quality assurance plan (IF ANY) related to production and inspection to be submitted in technical bid. List of Plant & Machineries required for manufacturing of subject item to be submitted.

PULLER ASSY. DRG. NO. VMT-SK-119-13000-10. FOR WINDING MACHINE 125MM SCCC (AS PER PART LIST ENCLOSED), Qty: 01 Set

PULLER ASSY. DRG. NO. VMT-SK-119-13000-10. FOR WINDING MACHINE 125MM SCCC (AS PER PART LIST ENCLOSED), Qty: 01 Set

VMT SK 119 13000 10

• Firm must submit the details of Manufacturing Technologies and Inspection/Testing Facilities available with the firm for manufacturing the subject item. Quality assurance plan (IF ANY) related to production and inspection to be submitted in technical bid. List of Plant & Machineries required for manufacturing of subject item to be submitted.

• Firm must submit the details of Manufacturing Technologies and Inspection/Testing Facilities available with the firm for manufacturing the subject item. Quality assurance plan (IF ANY) related to production and inspection to be submitted in technical bid. List of Plant & Machineries required for manufacturing of subject item to be submitted.

BAYONET AS PER DRG NO K 9030 STAR WITH FIRMS MATERIAL FOR TAR

BAYONET AS PER DRG NO K 9030 STAR WITH FIRMS MATERIAL FOR TAR

K-9030*

• AS PER DRAWING ATTACHED

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

COCK DISTRIBUTION TO DRAWING NO 172.66.101 CB-1

COCK DISTRIBUTION TO DRAWING NO 172.66.101 CB-1

DRAWING NO 172.66.101 CB-1

• MECHANICAL

• FIRM WILL HAVE TO SUBMIT TESTING FACILITY AVAILABLE WITH THEM FOR THE SUBJECT ITEM

HYDRAULIC COUPLING WITH SHAFT ASSY DRG NO.172-47-015 cbcb

DRG NO.172-47-015 cbcb

DRG NO.172-47-015 cbcb

• mechanical

• firm will have to submit testing facility available with them for subject item

BODY TO DER NO 175-47-014-A

BODY TO DER NO 175-47-014-A

175-47-014-A

• INVESTMENT CASTING

• FIRM WILL HAVE TO SUBMIT TESTING FACILITY AVAILABLE WITH THEM FOR SUBJECT ITEM

AVIATION COMPRESSOR AK 150C ASSY TO DRG NO.AK150C-01-CB

DRG NO.AK150C-01-CB

DRG NO.AK150C-01-CB

• MECHANICAL

• FIRM HAS TO SUBMIT TESTING FACILITY AVAILABLE WITH THEM FOR SUBJECT ITEM

Steel Blank of Cylinder Gas To Drg. No. SKM-889* without heat treatment (Steel Forging SKM-306*6 LF No. 0144079003 to be issued by SAF against B/G).

Steel Blank of Cylinder Gas To Drg. No. SKM-889* without heat treatment (Steel Forging SKM-306*6 LF No. 0144079003 to be issued by SAF against B/G).

SKM-889*

• Forging/Machining

• Chemical & Mechanical Properties as per std. given drawing
• Dimensional inspection, for all dimensions given in the drawing and other parameters which are mentioned in the relevant drawing

BOLT CARRIER BLANK S3 AS PER DRG NO TEND 2383 STAR 8 WITH FIRMS MATERIAL FOR TRICHY ASSAULT RIFLE

BOLT CARRIER BLANK S3 AS PER DRG NO TEND 2383 STAR 8 WITH FIRMS MATERIAL FOR TRICHY ASSAULT RIFLE

TEND 2383 STAR 8

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

SLING ASSY AS PER DRG NO K 9007 STR WITH FIRMS MATERIAL

SLING ASSY AS PER DRG NO K 9007 STR WITH FIRMS MATERIAL

K 9007STR

• AS PER DRAWING

• SLING ASSY AS PER DRG NO K 9007 STR WITH FIRMS MATERIAL

SIDE FOLDABLE BUTT ASSY AS PER DRG NO K 4110 STAR 5 WITH FIRMS MATERIAL REQUIRED FOR TAR

SIDE FOLDABLE BUTT ASSY AS PER DRG NO K 4110 STAR 5 WITH FIRMS MATERIAL REQUIRED FOR TAR

K-4110*5

• AS PER DRAWING
• MACHINING
• FABRICATION

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

FIRING PIN WITHOUT CHROME FLASH AS PER DRG No TEND 2571 FOR TRICHY ASSUALT RIFLE

AS PER DRG No TEND 2571 FOR TRICHY ASSUALT RIFLE

TEND 2571

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

SUPPLY OF DISCONNECTOR AS PER DRG NO MIM K 2065 00 WITH FIRMS MATERIAL

AS PER DRG NO MIM K 2065 00 WITH FIRMS MATERIAL

MIM K 2065 00

• MACHINING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

SUPPLY OF EXTRACTOR AS PER DRG NO MIM K 2012 00

AS PER DRG NO MIM K 2012 00

MIM K 2012 00

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

100 MM FOCAL LENGTH IR OPTICS FOR UNCOOLED THERMAL IMAGER AS PER SPECIFICATON NO: ODC-OLF/R&D/RL DATED 30.07.2019

100 MM FOCAL LENGTH IR OPTICS FOR UNCOOLED THERMAL IMAGER AS PER SPECIFICATON NO: ODC-OLF/R&D/RL DATED 30.07.2019

SPECIFICATON NO: ODC-OLF/R&D/RL DATED 30.07.2019

• FIRM NEEDS TO SUBMIT THE DETAILS OF MANUFACTURING FACILITIES REQUIRED FOR THE PRODUCTION OF THE SUBJECT ITEM

• FIRM NEEDS TO SUBMIT THE DETAILS OF TESTING FACILITIES REQUIRED FOR THE TESTING OF THE SUBJECT ITEM

100 MM FOCAL LENGTH IR OPTICS FOR UNCOOLED THERMAL IMAGER AS PER SPECIFICATON NO: ODC-OLF/R&D/RL DATED 30.07.2019

100 MM FOCAL LENGTH IR OPTICS FOR UNCOOLED THERMAL IMAGER AS PER SPECIFICATON NO: ODC-OLF/R&D/RL DATED 30.07.2019

SPECIFICATON NO: ODC-OLF/R&D/RL DATED 30.07.2019

• FIRM NEEDS TO SUBMIT THE DETAILS OF MANUFACTURING FACILITIES REQUIRED FOR THE PRODUCTION OF THE SUBJECT ITEM

• FIRM NEEDS TO SUBMIT THE DETAILS OF TESTING FACILITIES REQUIRED FOR THE TESTING OF THE SUBJECT ITEM

GRIP HANDLE(LEFT AND RIGHT) AS PER DRG.NO. CQA(I)-393/17 (LEFT) & DRG.NO. CQA(I)-393/1(RIGHT)

GRIP HANDLE(LEFT) AS PER DRG.NO. CQA(I)-393/17 OF GRIP LEFT ASSY FOR DEVICE FIRING 1B CAT/PT.NO.5340-014125

DRG.NO. CQA(I)-393/17 OF GRIP LEFT ASSY FOR DEVICE FIRING 1B CAT/PT.NO.5340-014125

• Moulding

• Chemical and Mechanaical properities as per std.given drawing
• Dimesnsional inspection, for all dimensions given in the drawing and other parameter which are mentioned in relevant drawing.

Electromagnet EM-46-000SB

As per Drawing No. EM-46-000SB

Drawing No. EM-46-000SB

• Electrical
• Mechanical

• Firm will have to submit testing facility available with them.

Electric Motor MVP-2, To Drawing No. MVP-2-000SB

As per Drawing No. MVP-2-000SB

Drawing No. MVP-2-000SB

• Electrical
• Mechanical

• Firm will have to submit testing facility available with them.

SENDING UNIT D-20 TO DRG NO D20 000CD

According to Drawing No. DRG NO D20 000CD

DRG.NO. D20-000CD

• mechanical Item, Firm will have to submit the List of Plant and Machinery available with them for manufacturing the subject Item.

• Firm will have to submit Testing facility available.

LASER UNIT AL5008008 LF NO 7440200788

LASER UNIT AL5008008 LF NO 7440200788

AL5008008

• LASER UNIT AL5008008 LF NO 7440200788

• LASER UNIT AL5008008 LF NO 7440200788

CONTROL MECHANISM AL6063271 LF NO 7440200792

CONTROL MECHANISM AL6063271 LF NO 7440200792

AL6063271

• CONTROL MECHANISM AL6063271 LF NO 7440200792

• CONTROL MECHANISM AL6063271 LF NO 7440200792

GYRO CHASIS AL5156009 LF NO 7440200696

GYRO CHASIS AL5156009 LF NO 7440200696

AL5156009

• GYRO CHASIS AL5156009 LF NO 7440200696

• GYRO CHASIS AL5156009 LF NO 7440200696