Two Way open End Heavy Duty Zipper 150 Cms

IS-14181-2002 (RA-2013) & Provisional Specification S/6421/Bag Sleeping Lt Weight/TC-6

• Weaving
• Moulding
• Processing

• visual
• Mechanical
• Chemical

Cord Nylon Braided OF 2452 N

JSS: 4020-9-1999, Provisional specification S/6421/Bag Sleeping Lt. Wt./ TC-6

• Braiding
• Processing

• visual
• Mechnical
• Chemical

FORG.FOR GEAR INTERMED.175-45-005F

FORG.FOR GEAR INTERMED.175-45-005F

175.45.005

• AS PER DRG SPECIFICATION

• AS PER DRG SPECIFICATION

FORG.FOR GEAR DRIVING 175-45-004

FORG.FOR GEAR DRIVING 175-45-004

175.45.004

• AS PER DRG SPECIFICATION

• AS PER DRG SPECIFICATION

Tape Nylon 2.54 cm + 1 – 0 U/D BS: 250 Kg

ADRDE/Specn/64(a)

• AS PER SPECIFICATION/DRAWING

• AS PER SPECIFICATION/DRAWING

FABRICATION OF DANGER BUILDING COAT WHITE THROUGH TRADE

SPECN-AS PER TECHNICAL PARTICULARS ENCLOSED

• AS PER SPECIFICATION/DRAWING

• AS PER SPECIFICATION/DRAWING

FABRICATION OF DANGER BUILDING TROUSERS WHITE THROUGH TRADE

SPECN-AS PER TECHNICAL PARTICULARS ENCLOSED

• AS PER SPECIFICATION/DRAWING

• AS PER SPECIFICATION/DRAWING

IC Bracket to Drg.No. SK-3706/34*7 Duly Heat Treated To:T Condition

IC Bracket to Drg.No. SK-3706/34*7 Duly Heat Treated To:T Condition

IC Bracket to Drg.No. SK-3706/34*7 Duly Heat Treated To:T Condition

• Machining and Assy.

• As per manufacturing Technology machining document

NIV PACK FRAME

DRAWING NO.CQA(GS)/US/557 except that :- Drg sheet No. 2 of 3 Dtd :24.04.2019

• AS PER SPECIFICATION/DRAWING

• AS PER SPECIFICATION/DRAWING

HOUSING WITH FERRULE & RUBBER SLEEVE FOR P.P. MIRAG 2000/SEA HARRIER A/C

SPECN-ADRDE/1357(a)

SPECN-ADRDE/1357(a)

• AS PER SPECIFICATION

• AS PER SPECIFICATION

Sub-Assy of Spring for Auxiliary Spring PTA-R Parachute

CQA(GS)/US/563

• AS PER SPECIFICATION

• AS PER SPECIFICATION

BALL TYPE SPRING(PSM SERIES)

ADRDE/1332(b)

• AS PER DRAWING/SPECIFICATION

• AS PER DRAWING/SPECIFICATION

CORDAGE POLYESTER HEAT SET BS:364 KG WITH RED THREAD

ADRDE/SPECN/74(a)

• AS PER SPECIFICATION

• AS PER SPECIFICATION

CORDAGE POLYESTER HEAT SET BS:318KG

ADRDE/SPECN/74(a)

• AS PER SPECIFICATION

• AS PER SPECIFICATION

COVER LF 9001110607

COVER LF 9001110607

BL7852429

• PLASTIC COMPONENTS

• PLASTIC COMPONENTS

FRAME LF 9001110407

FRAME LF 9001110407

BL7804050

• PLASTIC COMPONENTS

• PLASTIC COMPONENTS

LAMP HOLDER CHUCK LF 9001051125

LAMP HOLDER CHUCK LF 9001051125

BL6615014 CB

• PLASTIC COMPONENTS

• PLASTIC COMPONENTS

BODY LF 9001050995

BODY LF 9001050995

BL6675097

• PLASTIC COMPONENTS

• PLASTIC COMPONENTS

CAP LF 7445101056

CAP LF 7445101056

NBL7850032

• PLASTIC COMPONENTS

• PLASTIC COMPONENTS

POWER UNIT BOX ASSY LF 7420113096

POWER UNIT BOX ASSY LF 7420113096

OLF/MISC/603

• PLASTIC COMPONENTS

• PLASTIC COMPONENTS

BLOCK LF 7420113016

BLOCK LF 7420113016

BL7830195

• PLASTIC COMPONENTS

• PLASTIC COMPONENTS

BOBBIN LF 7420112081

BOBBIN LF 7420112081

OLF/MISC/608

• PLASTIC COMPONENTS

• PLASTIC COMPONENTS

MANUFACTURING AND SUPPLY OF BODY AS PER DRG NO K 4001STR3 WITH FIRMS MATERIAL REQUIRED FOR TAR

MANUFACTURING AND SUPPLY OF BODY AS PER DRG NO K 4001STR3 WITH FIRMS MATERIAL REQUIRED FOR TAR

K 4001STR3

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

BOLT CARRIER AS PER DRG NO K 2001STR2 IN FULLY FINISHED CONDITION WITH FIRMS MATERIAL REQUIRED FOR TAR

BOLT CARRIER AS PER DRG NO K 2001STR2 IN FULLY FINISHED CONDITION WITH FIRMS MATERIAL REQUIRED FOR TAR

K 2001STR2

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

MANUFACTURING AND SUPPLY OF BOLT AS PER DRG NO K 2011 WITH FIRMS MATERIAL REQUIRED FOR TAR

MANUFACTURING AND SUPPLY OF BOLT AS PER DRG NO K 2011 WITH FIRMS MATERIAL REQUIRED FOR TAR

K 2011

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

Supply Installation and Commissioning of Pneumatic Assembly Drg No VMT SK 119 18000 11 with Festo Make Control Cabinet Part No. IN CS 3049329 for 125 mm SCCC Winding Machine as per Part List Sheet No 1 to 8 and 10 and 11 Drawing and Scope of Work attached

Supply Installation and Commissioning of Pneumatic Assembly Drg No VMT SK 119 18000 11 with Festo Make Control Cabinet Part No. IN CS 3049329 for 125 mm SCCC Winding Machine as per Part List Sheet No 1 to 8 and 10 and 11 Drawing and Scope of Work attached

Drg No VMT SK 119 18000 11

• Firm must submit the details of Manufacturing Technologies and Inspection/Testing Facilities available with the firm for manufacturing the subject items. Quality assurance plan (IF ANY) related to production and inspection to be submitted in technical bid. List of Plant & Machineries required for manufacturing of subject item to be submitted.

• Firm must submit the details of Manufacturing Technologies and Inspection/Testing Facilities available with the firm for manufacturing the subject items. Quality assurance plan (IF ANY) related to production and inspection to be submitted in technical bid. List of Plant & Machineries required for manufacturing of subject item to be submitted.

LOCK OCK WITH BUCKLE

ADRDE/1354.

• As per Specification/Drawing

• As per Specification/Drawing

MANUFACTURING AND SUPPLY OF FULL FINISHED COMPONENT LEAVER PLATE TO DRG NO K 2071

MANUFACTURING AND SUPPLY OF FULL FINISHED COMPONENT LEAVER PLATE TO DRG NO K 2071

K 2071

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

ROD STL TOOL GR X108CR17MO 60D LF NO 9927082790

ROD STL TOOL GR X108CR17MO 60D LF NO 9927082790

• RAW MATERIAL

• RAW MATERIAL

SHT AL ALLOY GR 24345 T 3X500 LF NO 9927073490

SHT AL ALLOY GR 24345 T 3X500 LF NO 9927073490

• RAW MATERIAL

• RAW MATERIAL

BRASS ROD GR CUZN39PB1 65 MM DIA LF NO0711406065

BRASS ROD GR CUZN39PB1 65 MM DIA LF NO0711406065

• RAW MATERIAL

• RAW MATERIAL

BRASS ROD GR CUZN39PB1 55 MM DIA LF NO 0711406055

BRASS ROD GR CUZN39PB1 55 MM DIA LF NO 0711406055

• RAW MATERIAL

• RAW MATERIAL

BRASS ROD GR CUZN39PB1 8 MM DIA LF NO 0711406011

BRASS ROD GR CUZN39PB1 8 MM DIA LF NO 0711406011

• RAW MATERIAL

• RAW MATERIAL

BRASS ROD GR CUZN39PB1 3 MM DIA LF NO 0711406006

BRASS ROD GR CUZN39PB1 3 MM DIA LF NO 0711406006

• RAW MATERIAL

• RAW MATERIAL

ROD STL GR 40CR4 D 165/ FIXATOR LF NO 0333002165

ROD STL GR 40CR4 D 165/ FIXATOR LF NO 0333002165

• RAW MATERIAL

• RAW MATERIAL

IC TO DRG.NO.:TEND.922 F FOR SLIDE.(ICR-1328) 1005-001604

AS PER IC TO DRG.NO.:TEND.922 F FOR SLIDE.(ICR-1328) 1005-001604

TEND.922 F FOR SLIDE.(ICR-1328) 1005-001604

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

IC TO DRG NO.:TEND 1100 D FOR RAMP BACKSIGHT(ICR-1253)

AS PER DRG NO.:TEND 1100 D FOR RAMP BACKSIGHT(ICR-1253)

TEND 1100 D FOR RAMP BACKSIGHT(ICR-1253)

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

WRENCH, ADJUSTING FORESIGHT & LOCK NUT FORE SIGHT TO DRAWING NO.R.F.I.SK.NO.1051 *3 (MODIFIED)(FOR RIFLE 7.62 mm1A1)

AS PER DRAWING NO.R.F.I.SK.NO.1051 *3 (MODIFIED)(FOR RIFLE 7.62 mm1A1)

R.F.I.SK.NO.1051 *3 (MODIFIED)

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

SUPPLY OF SCREW PISTOL GRIP TO D.S. CAT. NO. 5305-005004 (ICR - 1380) TO LATEST D.C No.24275-SA DATED 26.02.1999 FOR DC.NO. LATEST ISSUE TO BE FOLLOWED

AS PER D.S. CAT. NO. 5305-005004 (ICR - 1380) TO LATEST D.C No.24275-SA DATED 26.02.1999 FOR DC.NO. LATEST ISSUE TO BE FOLLOWED

D.S. CAT. NO. 5305-005004 (ICR - 1380) TO LATEST D.C No.24275-SA DATED 26.02.1999

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

TE NO. D222 BO0209

TE NO. D222 BO0209

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

MFG & SUPPLY OF PIN LEAF TO D.S. CAT NO.5315-001767 DC NO.22647-SA DATED 20.08.1994 REQD IN WHITE FINISHED CONDITION (ICR 1329)

AS PER D.S. CAT NO.5315-001767 DC NO.22647-SA DATED 20.08.1994 REQD IN WHITE FINISHED CONDITION (ICR 1329)

D.S. CAT NO.5315-001767 DC NO.22647-SA DATED 20.08.1994 REQD IN WHITE FINISHED CONDITION (ICR 1329)

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

SUPPLY OF PIN AXIS HAMMER TO DS. CAT NO. 5315-009115 DC NO.25060-SA DT. 05/07/2001 REQUIRED IN WHITE FINISHED CONDITION . FOR DC NO. LATTEST ISSUE TO BE FOLLOWED. (WITH FIRMS MATER

AS PER DS. CAT NO. 5315-009115 DC NO.25060-SA DT. 05/07/2001 REQUIRED IN WHITE FINISHED CONDITION

DS. CAT NO. 5315-009115 DC NO.25060-SA DT. 05/07/2001 REQUIRED IN WHITE FINISHED CONDITION

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

SEAR SAFETY (ICR-1281) D.S. CAT No.:1005-001697, D.C.No.22816-SA DATED:20.01.1995 (ICR-1281)

AS PER DRAWING

ICR-1281

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

GUARD HAND LEFT & RIGHT ASSY. (PLASTIC) No.2, CQA(SA)/91,D.S.CAT.No.1005-007723,D.C.No.22706-SA Dt.5-11-94 IMPROVED VERSION FOR RIFLE 7.62mm 1A1 TO D.S.CAT.No.: 1005-007504, 1005-007505, 1005-007506,1005-007507,1005-001593,1005-1718,

AS PER DRG No.2, CQA(SA)/91,D.S.CAT.No.1005-007723,D.C.No.22706-SA Dt.5-11-94 IMPROVED VERSION FOR RIFLE 7.62mm 1A1 TO D.S.CAT.No.: 1005-007504, 1005-007505, 1005-007506,1005-007507,1005-001593,1005-1718,

DRG No.2, CQA(SA)/91,D.S.CAT.No.1005-007723,D.C.No.22706-SA Dt.5-11-94 IMPROVED VERSION FOR RIFLE 7.62mm 1A1 TO D.S.CAT.No.: 1005-007504, 1005-007505, 1005-007506,1005-007507,1005-001593,1005-1718,

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

SCREW HAND GUARD TO D.S.CAT. NO. 5305-005008 DC NO.24312-SA DATED 03-04-99 (ICR-1196) LATEST ISSUE SHOULD BE FOLLOWED.

AS PERD.S.CAT. NO. 5305-005008 DC NO.24312-SA DATED 03-04-99 (ICR-1196) LATEST ISSUE SHOULD BE FOLLOWED.

(ICR 1196) D.S.CAT. NO. 5305-005008 DC NO.24312-SA

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

SCREW LOCKING HINGE PIN D.S.CAT.No.: 5305-018166, D.C.No.:24629-SA, DATED:02/02/2000 FOR D.C.No. LATEST ISSUE TO BE FOLLOWED.

AS PER D.S.CAT.No.: 5305-018166, D.C.No.:24629-SA, DATED:02/02/2000 FOR D.C.No. LATEST ISSUE TO BE FOLLOWED.

(ICR-1195) D.S.CAT.No.: 5305-018166, D.C.No.:24629-SA, DATED:02/02/2000

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

Bracket Module Containing:- A) Bracket RHS to Drg.No.1403-01-01-09RHS B) Bracket LHS to Drg.No.1403-01-01-09LHS

Bracket Module Containing:- A) Bracket RHS to Drg.No.1403-01-01-09RHS B) Bracket LHS to Drg.No.1403-01-01-09LHS

A) Bracket RHS to Drg.No.1403-01-01-09RHS B) Bracket LHS to Drg.No.1403-01-01-09LHS

• melting facility & casting facility
• firm should have photostatting & heat treatment facility or Tie-up with other unit.
• firm should have foundry for steel items.
• . firm should have laboratory for chemical testing before and after drawn sample or Tie-up with the other laboratory unit.
• firm should have machinery facility for steel component.

• chemical lab & mechanical lab
• Firm should have painting facility.

Electrical Assy. Drg. No. VMT-SK-119-19000-11 for Winding Machine 125MM SCCC (As per Part List 09 Sheets, Drgs. & Scope of Work Enclosed), Qty: 1 Set

Electrical Assy. Drg. No. VMT-SK-119-19000-11 for Winding Machine 125MM SCCC (As per Part List 09 Sheets, Drgs. & Scope of Work Enclosed), Qty: 1 Set

Drg. No. VMT-SK-119-19000-11

• Firm must submit the details of Manufacturing Technologies and Inspection/Testing Facilities available with the firm for manufacturing the subject items. . Quality assurance plan (IF ANY) related to production and inspection to be submitted in technical bid. List of Plant & Machineries required for manufacturing of subject item to be submitted.

• Firm must submit the details of Manufacturing Technologies and Inspection/Testing Facilities available with the firm for manufacturing the subject items. . Quality assurance plan (IF ANY) related to production and inspection to be submitted in technical bid. List of Plant & Machineries required for manufacturing of subject item to be submitted.

CONNECTING PIECE REAR TO PT NO 1145139

CONNECTING PIECE REAR TO PT NO 1145139

• As per tender document Annexure L

• As per tender document Annexure L

CONNECTING PIECE FRONT TO PT NO 1148858

CONNECTING PIECE FRONT TO PT NO 1148858

• As per tender document Annexure L

• As per tender document Annexure L

ANTI REFLECTION COATING ON GERMANIUM LENS AS PER DRG

ANTI REFLECTION COATING ON GERMANIUM LENS AS PER DRG

• FIRM NEEDS TO UPLOAD DETAILS OF MANUFACTURING FACILITIES ALONG WITH THE APPLICATION FORM

• FIRM NEEDS TO UPLOAD DETAILS OF TESTING FACILITIES ALONG WITH THE APPLICATION FORM

BODY PR. DIE CASTING WITHOUT GROOVE TO DRG.NO. ODD/C/1028/1

BODY PR. DIE CASTING WITHOUT GROOVE TO DRG.NO. ODD/C/1028/1

DRG.NO. ODD/C/1028/1

• As per Sr.No.65 of Annexure-A with OFB Letter No.OFB/108/Online VR/QC dated 12.02.2019

• As per Sr.No.65 of Annexure-A with OFB Letter No.OFB/108/Online VR/QC dated 12.02.2019

GUIDE TO DRG.NO.GCF/50/40803

GUIDE TO DRG.NO.GCF/50/40803 (REF.DRG.NO.4076066).

• AS PER ANNEXURE L

• AS PER ANNEXURE L

GUIDE TO DRG.NO.GCF/50/40802

TO DRG.NO.GCF/50/40802 (REF.DRG.NO.4076063)

• AS PER ANNEXURE L

• AS PER ANNEXURE L

GUIDE TO DRG.NO.GCF/50/40801

GUIDE TO DRG.NO.GCF/50/40801 (REF.DRG.NO.4076056).

• AS PER ANNEXURE L

• AS PER ANNEXURE L

GUIDE TO DRG.NO.GCF/50/40800

GUIDE TO DRG.NO.GCF/50/40800 (REF.DRG.NO.4076054)

• AS PER ANNEXURE L

• AS PER ANNEXURE L

PIN DETENT SPRING TO CQA(A) DRG. NO. 13046-0-0 (AS PER DC NO. 36804-A DATED 01/01/2002

PIN DETENT SPRING TO CQA(A) DRG. NO. 13046-0-0 (AS PER DC NO. 36804-A DATED 01/01/2002

• AS PER ATTACHMENT

• AS PER ATTACHMENT

PIN DETENT PIVOT TO CQA(A) DRG. NO. 13038-0-0 (AS PER DC NO. 36804-A DATED 01/01/2002

PIN DETENT PIVOT TO CQA(A) DRG. NO. 13038-0-0 (AS PER DC NO. 36804-A DATED 01/01/2002

• AS PER ATTACHMENT

• AS PER ATTACHMENT

WASHER TO CQA (A) DRG. NO. 13975-0-0 (AS PER DC NO. 36804-A DATED 01/01/2002)

WASHER TO CQA (A) DRG. NO. 13975-0-0 (AS PER DC NO. 36804-A DATED 01/01/2002)

• AS PER ATTACHMENT

• AS PER ATTACHMENT

PIN ROTOR LOCK TO CQA(A) DRG. NO. 13047-0-0 (AS PER DC NO. 36804-A DATED 01/01/2002)

PIN ROTOR LOCK TO CQA(A) DRG. NO. 13047-0-0 (AS PER DC NO. 36804-A DATED 01/01/2002)

• AS PER ATTACHMENT

• AS PER ATTACHMENT

TE.NO. D182 G5 2344

TE.NO. D182 G5 2344

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

IDENTIFICATION LIST FOR RIFLE 7.62MM 1A1 TO CODE NO.IL/IW/29 (AS PER SPECIFICATIONS& REQUIREMENTS MENTIONED IN THE ANNEXURE)

IDENTIFICATION LIST FOR RIFLE 7.62MM 1A1 TO CODE NO.IL/IW/29 (AS PER SPECIFICATIONS& REQUIREMENTS MENTIONED IN THE ANNEXURE)

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

IDENTIFICATION LIST FOR RIFLE 7.62MM 1A1 TO CODE NO.IL/IW/29 (AS PER SPECIFICATIONS& REQUIREMENTS MENTIONED IN THE ANNEXURE)

IDENTIFICATION LIST FOR RIFLE 7.62MM 1A1 TO CODE NO.IL/IW/29 (AS PER SPECIFICATIONS& REQUIREMENTS MENTIONED IN THE ANNEXURE)

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

CAN, OIL MG MK3 DS CAT NO. 4930-000800, 1005-000336 TO 1005-000338 & 5310-002657, DC NO. 23500-SA DT.20-9-96

AS PER DS CAT NO. 4930-000800, 1005-000336 TO 1005-000338 & 5310-002657, DC NO. 23500-SA DT.20-9-96

DS CAT NO. 4930-000800, 1005-000336 TO 1005-000338 & 5310-002657, DC NO. 23500-SA DT.20-9-96

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

DS CAT NO. 1005-002050

DS CAT NO. 1005-002050

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

DS CAT NO. 1005-002050

DS CAT NO. 1005-002050

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

BOTTLE OIL MK-V, DS CAT.NO.1005-000323,1005-000324, 1005-000326,1005-000327,1005-000328, DC.NO.23296 SA-DT:21/03/96. FOR DC. NO. LATEST ISSUE TO BE FOLLOWED.

AS PER DS CAT.NO.1005-000323,1005-000324, 1005-000326,1005-000327,1005-000328, DC.NO.23296 SA-DT:21/03/96. FOR DC. NO. LATEST ISSUE TO BE FOLLOWED.

DS CAT.NO.1005-000323,1005-000324, 1005-000326,1005-000327,1005-000328, DC.NO.23296

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

As per Drawing

As per Drawing

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

LF:6583305001

LF:6583305001

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

PULL THROUGH 1A(NYLON) AS PER DS CAT NO.1005-001760 FOR DC NO. 22520-SA DATED 2.5.94 LATEST ISSUE TO BE FOLLOWED FOR RIFLE 7.62mm 1A1

AS PER DS CAT NO.1005-001760 FOR DC NO. 22520-SA DATED 2.5.94 LATEST ISSUE TO BE FOLLOWED FOR RIFLE 7.62mm 1A1

DS CAT NO.1005-001760 FOR DC NO. 22520-SA DATED 2.5.94 LATEST ISSUE TO BE FOLLOWED FOR RIFLE 7.62mm 1A1

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

LV6/MT7-3110-002686 BALL BEARING DIA. 3.175mm TOIS: 2898, 1976 GRADE 5.MATL: IS 4398-1972. (FOR ICR 72SA)

LV6/MT7-3110-002686 BALL BEARING DIA. 3.175mm TOIS: 2898, 1976 GRADE 5.MATL: IS 4398-1972. (FOR ICR 72SA)

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

PIN KEEP SPLIT 1/16" GI 5315- 000053(DIA 1.59mm X19.05mm LONG)IS:549 : 2005.

AS PER DRAWING

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

WASHER SPRING SINGLE COIL TYPE B STEEL ZINC PLATED (NOMINAL SIZE)6MM CAT/PT.NO.G1/5310-001434 SPECN.IS:3063:1972 & SS NO.CIGS/SS/173(D).THICKNESS OF ZINC PLATING TO IS 1573-1970 SERVICE CONDN.NO.1(GR.FE ZN 5)CHROMEPASSIVATED

AS PER DRG

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

FRONT SIGHT BLOCK BLANK S3 AS ER DRG No.TEND 2508 (for K 1207)

AS ER DRG No.TEND 2508 (for K 1207)

TEND 2508 (for K 1207)

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

AUTO SEAR TO DRG NO MIM K 2067 00 TAR

AUTO SEAR TO DRG NO MIM K 2067 00 TAR

TEND 2517 (for K 2067)

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

SUPPLY OF GAS PISTON BLANK AS PER DRG NO. TEND 2547 STAR 5 WITH FIRMS MATERIAL

AS PER DRG NO. TEND 2547 STAR 5 WITH FIRMS MATERIAL

TEND 2547 STAR 5

• AS PER DRAWING

• AS PER DRAWING

SUPPLY OF REAR SIGHT ELEVATING SLIDE AS PER DRG. NO. K 2025 WITH FIRMS MATERIAL

AS PER DRG. NO. K 2025

K 2025

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

SUPPLY OF REAR SIGHT ELEVATING SLIDE CATCH AS PER DRG NO. K 2023 WITH FIRMS MATERIAL

AS PER DRG NO. K 2023

K 2023

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

SUPPLY OF STUD AS PER DRG NO.K-1302 WITH FIRMS MATERIAL

AS PER DRG NO.K-1302 WITH FIRMS MATERIAL

K 1302

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

PLASTIC MAGAZINE ASSEMBLY AS PER DRG NO K 7040 STAR WITH FIRMS MATERIAL REQUIRED FOR TAR

PLASTIC MAGAZINE ASSEMBLY AS PER DRG NO K 7040 STAR WITH FIRMS MATERIAL REQUIRED FOR TAR

K 7040 STAR

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE