REDUCING VALVE(VALVE BLOCK PUMP LEFT) TO PART NO.5184809

REDUCING VALVE(VALVE BLOCK PUMP LEFT) TO PART NO.5184809

• AS PER ANNEXURE L

• AS PER ANNEXURE L

FIRING DEVICE EU

FIRING DEVICE (EU) TO PART NO. 1149427

• AS PER ANNEXURE L

• AS PER ANNEXURE L

RELIEF VALVE VALVE BLOCK PUMP RIGHT

RELIEF VALVE (VALVE BLOCK PUMP RIGHT) TO PART NO.6334637

• AS PER ANNEXURE L

• AS PER ANNEXURE L

REDUCING VALVE VALVE PANEL

REDUCING VALVE (VALVE PANEL) TO PART NO.6334598

• AS PER ANNEURE L

• AS PER ANNEURE L

VALVE PANEL EU

VALVE PANEL (EU) TO PART NO. P1/155SW/W/P1 1157400

• AS PER ANNEXURE L

• AS PER ANNEXURE L

HYDRAULIC CYLINDER PRIMER EU TO PT

HYDRAULIC CYLINDER PRIMER(EU) TO PART NO.1157397

• AS PER ANNEXURE L

• AS PER ANNEXURE L

RETURN FILTER EU HYDRAULIC TANK

RETURN FILTER(EU)(HYDRAULIC TANK) TO PART NO.1149470

• AS PER ANNEXURE L

• AS PER ANNEXURE L

HYDRAULIC CYLINDER LOADING TRAY EU

HYDRAULIC CYLINDER LOADING TRAY(EU) TO PART NO.1149437

• AS PER ANNEXURE L

• AS PER ANNEXURE L

HYDRAULIC CYLINDER PENDULUM EU

HYDRAULIC CYLINDER PENDULUM (EU) TO PART NO. 1149432

• AS PER ANNEXURE L

• AS PER ANNEXURE L

PIPE COUPLING 3/4" BSPX20 PT1132515

PIPE COUPLING 3/4" BSPX20 PT1132515

• AS PER ANNEXURE L

• AS PER ANNEXURE L

ACCUMULATOR EU TO PT NO 1149423

ACCUMULATOR (EU)TO PT.NO.1149423.

• AS PER ANNEXURE L

• AS PER ANNEXURE L

TORQUE MOTOR TO PT NO 1146007

TORQUE MOTOR TO PT.NO.1146007.

• AS PER ANNEXURE L

• AS PER ANNEXURE L

GEAR PUMP TO PT.NO.4080914

GEAR PUMP TO PT.NO.4080914

• AS PER ANNEXURE L

• AS PER ANNEXURE L

PILOT VALVE MOOG TO DRG NO 6333027.

PILOT VALVE MOOG TO DRG NO 6333027.

• AS PER ANNEXURE L

• AS PER ANNEXURE L

PRESSURE OVERRIDE VALVE DRG 6333028

PRESSURE OVERRIDE VALVE TO DRG NO 6333028

• AS PER ANNEXURE L

• AS PER ANNEXURE L

LOCKING VALVE TRAVERSE DRG 1129765

LOCKING VAVEL TRAVERSE TO DRG NO 1129765

• AS PER ANNEXURE L

• AS PER ANNEXURE L

VALVE BLOCK TO PT NO 5136617

VALVE BLOCK TO PART NO.5136617

• AS PER ANNEXURE L

• AS PER ANNEXURE L

HYDR CYLINDER OPERATING DEVICE EU

HYDRAULIC CYLINDER OPERATING DEVICE (EU) TO PART NO.1166281.

• AS PER ANNEXURE L

• AS PER ANNEXURE L

VALVE BLOCK RAMMER EU PT 1157395

VALVE BLOCK RAMMER(EU) TO PART NO.1157395.

• AS PER ANNEXURE L

• AS PER ANNEXURE L

DIRECTIONAL CONTROL VALVE EU

DIRECTIONAL CONTROL VALVE (EU) TO PART NO.1155379

• AS PER ANNEXURE L

• AS PER ANNEXURE L

HYDRAULIC CYLINDER CASTOR WHEEL EU

HYDRAULIC CYLINDER CASTOR WHEEL(EU) TO PART NO.1149476

• AS PER ANNEXURE L

• AS PER ANNEXURE L

SUSPENSION UNIT EU PT NO 1149472

SUSPENSION UNIT (EU) TO PART NO.1149472

• AS PER ANNEXURE L

• AS PER ANNEXURE L

DIRECTIONAL CONTROL VALVE 1149425

DIRECTIONAL CONTROL VALVE TO PART NO.1149425.

• AS PER ANNEXURE L

• AS PER ANNEXURE L

PRESSURE VESSEL EU TO PT 1149416

PRESSURE VESSEL (EU) TO PART NO.1149416

• AS PER ANNEXURE L

• AS PER ANNEXURE L

VALVE BLOCK PUMP RIGHT EU 1149452

VALVE BLOCK PUMP RIGHT(EU) TO PART NO.1149452

• AS PER ANNEXURE L

• AS PER ANNEXURE L

PUMP UNIT LEFT TO PART NO 1149964

PUMP UNIT LEFT TO PART.NO.1149964

• AS PER ANNEXURE L

• AS PER ANNEXURE L

CONTROL VALVE LOADING DEVICE EU

CONTROL VALVE LOADING DEVICE(EU) TO PART NO.1157398

• AS PER ANNEXURE L

• AS PER ANNEXURE L

CONTROL VALVE RAMMER EU 1157396

CONTROL VALVE RAMMER (EU) TO PART.NO.1157396

• AS PER ANNEXURE L

• AS PER ANNEXURE L

PUMP WITH CONTROL UNIT EU 1149448

PUMP WITH CONTROL UNIT(EU).TO PART.NO.1149448

• AS PER ANNEXURE L

• AS PER ANNEXURE L

HYDRAULIC CYL RAMMER UNIT EU

HYDRAULIC CYL.RAMMER UNIT (EU) TO PART NO.1149421

• AS PER ANNEXURE L

• AS PER ANNEXURE L

PUMP UNIT RIGHT TO PART NO 1147180

PUMP UNIT RIGHT TO PART.NO.1147180

• AS PER ANNEXURE L

• AS PER ANNEXURE L

HYDRAULIC MOTOR EU PT NO 1149153

HYDRAULIC MOTOR(EU) TO PART.NO.1149153

• AS PER ANNEXURE L

• AS PER ANNEXURE L

AMMUNITION CRANE(EU) PT.1167265

AMMUNITION CRANE(EU) PART NO.1167265

• AS PER ANNEXURE L

• AS PER ANNEXURE L

ALLOY STEEL SHEET SIZE 3 MM THICK( X 2500 MM LONG X 1000 MM WIDTH) TO SPECN STA 60 A COND

ALLOY STEEL SHEET SIZE 3 MM THICK( X 2500 MM LONG X 1000 MM WIDTH) TO SPECN STA 60 A COND

• As per tender document Annexure L

• As per tender document Annexure L

AS PER TENDER

AS PER TENDER

• AS PER TENDER

• AS PER TENDER

AS PER REQUIREMENT & SPECIFICATION

AS PER REQUIREMENT & SPECIFICATION

• as per tender

• as per tender

AS PER REQUIREMENT & SPECIFICATION

AS PER REQUIREMENT & SPECIFICATION

• as per tender

• as per tender

PL SL FS MD DT OP END AT LK WH 28 CM IS: 14181 (Part 1 to 3) :2002 Amendment no. 2, Reaffirmed 2013AS PER RELEVANT CLAUSE OF SPECIFICATIONAS PER RELEVANT CLAUSE OF SPECIFICATION

PL SL FS MD DT OP END AT LK WH 28 CM IS: 14181 (Part 1 to 3) :2002 Amendment no. 2, Reaffirmed 2013AS PER RELEVANT CLAUSE OF SPECIFICATIONAS PER RELEVANT CLAUSE OF SPECIFICATION

• as per attached list (Manufacturing Technology Files )

• as per attached list (Testing / Inspection Facility Files )

PL.SL.FS.MD.DT.OP.END AT LK OG 28 CM IS: 14181 (Part 1 to 3) :2002 Amendment no. 2, Reaffirmed 2013AS PER RELEVANT CLAUSE OF SPECIFICATIONAS PER RELEVANT CLAUSE OF SPECIFICATION

PL.SL.FS.MD.DT.OP.END AT LK OG 28 CM IS: 14181 (Part 1 to 3) :2002 Amendment no. 2, Reaffirmed 2013AS PER RELEVANT CLAUSE OF SPECIFICATIONAS PER RELEVANT CLAUSE OF SPECIFICATION

• as per attached list (Manufacturing Technology Files )

• as per attached list (Testing / Inspection Facility Files )

PLASTIC SLIDE FASTENER OPEN END MEDIUM SPECIAL DUTY WHITE 62CM. SPECIFICATION:-IS:14181(PART 1-3) 2002 REAFFIRMED-2013.AS PER RELEVANT CLAUSE OF SPECIFICATION.AS PER RELEVANT CLAUSE OF SPECIFICATION

PLASTIC SLIDE FASTENER OPEN END MEDIUM SPECIAL DUTY WHITE 62CM. SPECIFICATION:-IS:14181(PART 1-3) 2002 REAFFIRMED-2013.AS PER RELEVANT CLAUSE OF SPECIFICATION.AS PER RELEVANT CLAUSE OF SPECIFICATION

• as per attached list (Manufacturing Technology Files )

• as per attached list (Testing / Inspection Facility Files )

PLASTIC SLIDE FASTENER OPEN END MEDIUM SPECIAL DUTY WHITE 58CM. SPECIFICATION:- IS:14181(PART 1-3) 2002 REAFFIRMED-2013.AS PER RELEVANT CLAUSE OF SPECIFICATION.AS PER RELEVANT CLAUSE OF SPECIFICATION

PLASTIC SLIDE FASTENER OPEN END MEDIUM SPECIAL DUTY WHITE 58CM. SPECIFICATION:- IS:14181(PART 1-3) 2002 REAFFIRMED-2013.AS PER RELEVANT CLAUSE OF SPECIFICATION.AS PER RELEVANT CLAUSE OF SPECIFICATION

• as per attached list (Manufacturing Technology Files )

• as per attached list (Testing / Inspection Facility Files )

PLASTIC SLIDE FASTENER OPEN END MEDIUM SPECIAL DUTY WHITE 54 CM. SPECIFICATION:- IS:14181(PART 1-3) 2002 REAFFIRMED:-2013.AS PER RELEVANT CLAUSE OF SPECIFICATION.AS PER RELEVANT CLAUSE OF SPECIFICATION

PLASTIC SLIDE FASTENER OPEN END MEDIUM SPECIAL DUTY WHITE 54 CM. SPECIFICATION:- IS:14181(PART 1-3) 2002 REAFFIRMED:-2013.AS PER RELEVANT CLAUSE OF SPECIFICATION.AS PER RELEVANT CLAUSE OF SPECIFICATION

• as per attached list (Manufacturing Technology Files )

• as per attached list (Testing / Inspection Facility Files )

PLASTIC SLIDE FASTENER OPEN END MEDIUM SPECIAL DUTY WHITE 76CM. SPECIFICATION:- IS:14181(PART 1-3) 2002 REAFFIRMED-2013.AS PER RELEVANT CLAUSE OF SPECIFICATION.AS PER RELEVANT CLAUSE OF SPECIFICATION

PLASTIC SLIDE FASTENER OPEN END MEDIUM SPECIAL DUTY WHITE 76CM. SPECIFICATION:- IS:14181(PART 1-3) 2002 REAFFIRMED-2013.AS PER RELEVANT CLAUSE OF SPECIFICATION.AS PER RELEVANT CLAUSE OF SPECIFICATION

• as per attached list (Manufacturing Technology Files )

• as per attached list (Testing / Inspection Facility Files )

PLASTIC SLIDE FASTENER OPEN END MEDIUM SPECIAL DUTY WHITE 72 CM. SPECIFICATION:- IS:14181(PART 1-3): 2002 REAFFIRMED-2013.AS PER RELEVANT CLAUSE OF SPECIFICATION.AS PER RELEVANT CLAUSE OF SPECIFICATION

PLASTIC SLIDE FASTENER OPEN END MEDIUM SPECIAL DUTY WHITE 72 CM. SPECIFICATION:- IS:14181(PART 1-3): 2002 REAFFIRMED-2013.AS PER RELEVANT CLAUSE OF SPECIFICATION.AS PER RELEVANT CLAUSE OF SPECIFICATION

• as per attached list (Manufacturing Technology Files )

• as per attached list (Testing / Inspection Facility Files )

PLASTIC SLIDE FASTNER OPEN END MEDIUM SPECIAL DUTY WHITE 66CM. SPECIFICATION:- IS:14181 (PART 1-3): 2002 REAFFIRMED-2013.AS PER RELEVANT CLAUSE OF SPECIFICATION.AS PER RELEVANT CLAUSE OF SPECIFICATION

PLASTIC SLIDE FASTNER OPEN END MEDIUM SPECIAL DUTY WHITE 66CM. SPECIFICATION:- IS:14181 (PART 1-3): 2002 REAFFIRMED-2013.AS PER RELEVANT CLAUSE OF SPECIFICATION.AS PER RELEVANT CLAUSE OF SPECIFICATION

• as per attached list (Manufacturing Technology Files )

• as per attached list (Testing / Inspection Facility Files )

PLASTIC SLIDE FASTENER HEAVY DUTY OPEN END REVERSIBLE SLIDEROG 80 CM.SPECN NO. IS:14181(PART 1-3):-2002 Reaffirmed-2013.AS PER RELEVANT CLAUSE OF SPECIFICATION.AS PER RELEVANT CLAUSE OF SPECIFICATION

PLASTIC SLIDE FASTENER HEAVY DUTY OPEN END REVERSIBLE SLIDEROG 80 CM.SPECN NO. IS:14181(PART 1-3):-2002 Reaffirmed-2013.AS PER RELEVANT CLAUSE OF SPECIFICATION.AS PER RELEVANT CLAUSE OF SPECIFICATION

• as per attached list (Manufacturing Technology Files )

• as per attached list (Testing / Inspection Facility Files )

PLASTIC SLIDE FASTENER HEAVY DUTY OPEN END REVERSIBLE SLIDER OG 76 CM. SPECN NO. IS:14181(PART 1-3):-2002 Reaffirmed-2013.AS PER RELEVANT CLAUSE OF SPECIFICATION.AS PER RELEVANT CLAUSE OF SPECIFICATION

PLASTIC SLIDE FASTENER HEAVY DUTY OPEN END REVERSIBLE SLIDER OG 76 CM. SPECN NO. IS:14181(PART 1-3):-2002 Reaffirmed-2013.AS PER RELEVANT CLAUSE OF SPECIFICATION.AS PER RELEVANT CLAUSE OF SPECIFICATION

• as per attached list (Manufacturing Technology Files )

• as per attached list (Testing / Inspection Facility Files )

PLASTIC SLIDE FASTENER HEAVY DUTY OPEN END REVERSIBLE SLIDER OG 72 CM. SPECN NO.IS:14181(PART 1-3):- 2002 Reaffirmed-2013.AS PER RELEVANT CLAUSE OF SPECIFICATION.AS PER RELEVANT CLAUSE OF SPECIFICATION

PLASTIC SLIDE FASTENER HEAVY DUTY OPEN END REVERSIBLE SLIDER OG 72 CM. SPECN NO.IS:14181(PART 1-3):- 2002 Reaffirmed-2013.AS PER RELEVANT CLAUSE OF SPECIFICATION.AS PER RELEVANT CLAUSE OF SPECIFICATION

• as per attached list (Manufacturing Technology Files)

• as per attached list (Testing / Inspection Facility Files)

PLASTIC SLIDE FASTENER OF MEDIUM SPECIAL DUTY OPEN END WHITE 28 CMS

PLASTIC SLIDE FASTENER OF MEDIUM SPECIAL DUTY OPEN END WHITE28 CMS.IS: 14181 (Part 1 to 3)Amendment no. 2, Reaffirmed 2013AS PER RELEVANT CLAUSE OF SPECIFICATIONAS PER RELEVANT CLAUSE OF SPECIFICATION

• as per attached list (Manufacturing Technology Files )

• as per attached list (Testing / Inspection Facility Files )

CENTRALITE II AS PER SPECIFICATION No.GOST No.2154-77

CENTRALITE II AS PER SPECIFICATION No.GOST No.2154-77

NA

• YES

• YES

Spring Plunger Restraning to CQA (A) Drg No. 15044-2-O (As per DC No. 36804-A Dated 01/01/2002)

Spring Plunger Restraning to CQA (A) Drg No. 15044-2-O (As per DC No. 36804-A Dated 01/01/2002)

• AS PER PRE-QUALIFICATION CRITERIA

• AS PER QUALITY MONITORING INSTRUCTIONS.

Spring Centrifugal Pin to CQA (A) Drg No. 13132-O-O(As per DC No. 36804-A Dated 01/01/2002)

Spring Centrifugal Pin to CQA (A) Drg No. 13132-O-O(As per DC No. 36804-A Dated 01/01/2002)

• AS PER PRE-QUALIFICATION CRITERIA

• AS PER QUALITY MONITORING INSTRUCTIONS.

Spring Interrupter 13125-O-O (As per DC No. 36804-A Dated 01/01/2002)

Spring Interrupter 13125-O-O (As per DC No. 36804-A Dated 01/01/2002)

13125-O-O (As per DC No. 36804-A Dated 01/01/2002)

• AS PER PRE-QUALIFICATION CRITERIA

• AS PER QUALITY MONITORING INSTRUCTIONS.

COPPER SHEET TO SPECIFICATION DPRLM 3 M1 TY 48-21-664-79 (OR) IS 191 (PART 4) : 1980 (REAFFIRMATION 2006) GR CATHODE COPPER SIZE :THICKNESS 5(-0.26 MM) X WIDTH 60(+2 MM) X 600 MM LONG

COPPER SHEET TO SPECIFICATION DPRLM 3 M1 TY 48-21-664-79 (OR) IS 191 (PART 4) : 1980 (REAFFIRMATION 2006) GR CATHODE COPPER SIZE :THICKNESS 5(-0.26 MM) X WIDTH 60(+2 MM) X 600 MM LONG

• AS PER PRE-QUALIFICATION CRITERIA

• AS PER QUALITY MONITORING INSTRUCTIONS.

COPPER SHEET TO SPECIFICATION DPRLM 6 M1 TY 48-21-664-79 (OR) IS 191(PART 4) :1980 (REAFFIRMATION 2006) GR CATHODE COPPER SIZE: THICKNESS 6 (-0.26 MM) X WIDTH 142 (+2 MM) X 600 MM LONG

COPPER SHEET TO SPECIFICATION DPRLM 6 M1 TY 48-21-664-79 (OR) IS 191(PART 4) :1980 (REAFFIRMATION 2006) GR CATHODE COPPER SIZE: THICKNESS 6 (-0.26 MM) X WIDTH 142 (+2 MM) X 600 MM LONG

• AS PER PRE-QUALIFICATION CRIITERIA

• AS PER QUALITY MONITORING INSTRUCTIONS.

SPRING TENSION TO CQA (A ) DRG NO. 13121- O- O AS PER DC NO 36804 -A DATED 01/01/2002

SPRING TENSION TO CQA (A ) DRG NO. 13121- O- O AS PER DC NO 36804 -A DATED 01/01/2002

CQA (A ) DRG NO. 13121- O- O AS PER DC NO 36804 -A DATED 01/01/2002

• A S PER PRE-QUALIFICATION CRITERIA

• AS PER QUALITY MONITORING INSTRUCTIONS

UN-COOLED THERMAL ENGINE FOR WEAPON SIGHT AS PER DRG. NO. MCT-3495

UN-COOLED THERMAL ENGINE FOR WEAPON SIGHT AS PER DRG. NO. MCT-3495

DRG. NO. MCT-3495

• ANNEXURE LIST TO OFB LETTER NO. OFB/108/ONLINE VR/QC DTD. 12.02.2019 , SL. NO. 62 & 63

• ANNEXURE LIST TO OFB LETTER NO. OFB/108/ONLINE VR/QC DTD. 12.02.2019 , SL. NO. 62 & 63

STEEL BAR CARBON 1117 LEADED COLD FINISHED ASTM A 108 OR STEEL WIRE CARBON COLD FINISHED 1035 SPECN QQ-W 451 OR 4431 LATEST ISSUE GR 14C 14S 14 IN COLD DRAWN COND OR BS 970 PT I 1983 GR 080 M40 IN COLD DRAWN COND TO SIZE: 4.5 +/-0.1 MM DIA IN STRAIGHT LENGTH OF 2-3 METRES

STEEL BAR CARBON 1117 LEADED COLD FINISHED ASTM A 108 OR STEEL WIRE CARBON COLD FINISHED 1035 SPECN QQ-W-451 OR 4431(LATEST ISSUE) GR 14C 14S 14 IN COLD DRAWN COND OR BS 970 PT I 1983 GR 080 M40 IN COLD DRAWN COND TO SIZE: 4.5 +/-0.1 MM DIA IN STRAIGHT LENGTH OF 2-3 METRES

• AS PER PRE -QUALIFICATION CRITERIAI

• AS PER MONITORING INSTRUCTIONS

STEEL LEADED BAR 1137 ASTM-A 108 WITH ROCKWELL HARDNESS RHC 30-45 OR STEEL GRADE 40C15S12-IS 4431 (LATEST ISSUE) TO ACHIEVE HARDNESS HRC 30-45 SIZE :6.5 +/-0.1 MM DIA IN STRAIGHT LENGTH OF 2-3 METRES

STEEL LEADED BAR 1137 ASTM-A 108 WITH ROCKWELL HARDNESS RHC 30-45 OR STEEL GRADE 40C15S12-IS 4431 (LATEST ISSUE) TO ACHIEVE HARDNESS HRC 30-45 SIZE :6.5 +/-0.1 MM DIA IN STRAIGHT LENGTH OF 2-3 METRES

• AS PER PRE-QUALIFICATION CRITERIA

• AS PER MONITORING INSTRUCTION

STEEL BAR CARBON COLD FIN 1137 (LEADED) SPECN ASTM A 108 OR ST. BAR HOT ROLLED ALLOY GR. 4037 ASTM A322 WITH MIN. ROCKWELL HARD. RHC 35 -45 OR BS970 (LATEST ISSUE) PT1 1983 GR. 605 M36 IN V COND WITH RH 35-45 OR IS 4431 (LATEST ISSUE) DESIGN 40 C 15S 12 TO ACHIEVE HARD. HRC 35-45 SZ 11 +/-0.1 MM DIA IN 2-3 MTR ST. LENGTH

STEEL BAR CARBON COLD FIN 1137 (LEADED) SPECN ASTM A 108 OR ST. BAR HOT ROLLED ALLOY GR. 4037 ASTM A322 WITH MIN. ROCKWELL HARD. RHC 35 -45 OR BS970 (LATEST ISSUE) PT1 1983 GR. 605 M36 IN V COND WITH RH 35-45 OR IS 4431 (LATEST ISSUE) DESIGN 40 C 15S 12 TO ACHIEVE HARD. HRC 35-45 SZ 11 +/-0.1 MM DIA IN 2-3 MTR ST. LENGTH

• AS PER PRE-QUALIFICATION CRITERIA

• AS PER MONITORING INSTRUCTIONS

ST.SQ.100 MM TO SPCN.BS:3S144-95(99)GD S-144D MATL PROCESSED THROUGH LFVD WITH CAL.SILICATE TREATMENT.% OF SULPHUR & PHO- SPHORUS NOT EXCEED 0.015 & 0.03.AS PER IS:4163-82 INCLUSION RATING NOT EXCEED THE FOLLOWING LIMIT THN./THK.SULPHIDE1.5-1 ALUMINA:1.5-1,SILICATE:1.5-1,GLOBULAR OXIDE:2.0-1

ST.SQ.100 MM TO SPCN.BS:3S144-95(99)GD S-144D MATL PROCESSED THROUGH LFVD WITH CAL.SILICATE TREATMENT.% OF SULPHUR & PHO- SPHORUS NOT EXCEED 0.015 & 0.03.AS PER IS:4163-82 INCLUSION RATING NOT EXCEED THE FOLLOWING LIMIT THN./THK.SULPHIDE1.5-1 ALUMINA:1.5-1,SILICATE:1.5-1,GLOBULAR OXIDE:2.0-1

• as per tender document annexure L

• as per tender document annexure L

0329550050 ST.RD.50x2200TO SPCN.BS:3S144-95(99)GD-S144H TEST COND.S144H .LFVD(WITH CAL.SILICATE TREATMENT %OF SULPHUR & PHOS.NOT EXCEED 0.015 & 0.03.INCLUSION RATING SHOULD ALSO NOTEXCEED THE FOLLO.LIMIT SECONDARY REFINING ST.ASPERIS:4163 -82 i.e THN/THK SUL.1.5-1,ALUMI.1.5-1 SILI:1.5-1GLO OX.2.0-1

0329550050 ST.RD.50x2200TO SPCN.BS:3S144-95(99)GD-S144H TEST COND.S144H .LFVD(WITH CAL.SILICATE TREATMENT %OF SULPHUR & PHOS.NOT EXCEED 0.015 & 0.03.INCLUSION RATING SHOULD ALSO NOTEXCEED THE FOLLO.LIMIT SECONDARY REFINING ST.ASPERIS:4163 -82 i.e THN/THK SUL.1.5-1,ALUMI.1.5-1 SILI:1.5-1GLO OX.2.0-1

• as tender document

• as tender document

0-RING .STD.NO.N9-8-139.3X5.7

0-RING .STD.NO.N9-8-139.3X5.7

• as per tender document annexure L

• as per tender document annexure L

0-RING BOF.STD.NO.N9-8-59.5X3

0-RING BOF.STD.NO.N9-8-59.5X3

• as per tender document annexure L

• as per tender document annexure L

0-RING .STD.NO.N9-8-59.5X3

0-RING .STD.NO.N9-8-59.5X3

• as per tender document annexure L

• as per tender document annexure L

0-RING STD.NO.N9-8-89.5X3

0-RING STD.NO.N9-8-89.5X3

• as per tender document annexure L

• as per tender document annexure L

V-RING TO DRG.NO.6354484D

V-RING TO DRG.NO.6354484D

• AS PER TENDER DOCUMENT ANN L

• AS PER TENDER DOCUMENT ANN L

'V' RING 6354486

'V' RING 6354486

• AS PER TENDER DOCUMENT ANNEXURE L

• AS PER TENDER DOCUMENT ANNEXURE L

O-RING TO DRG NO. 6354248D

O-RING TO DRG NO. 6354248D

• AS PER TENDER DOCUMENT ANN L

• AS PER TENDER DOCUMENT ANN L

O-RING TO DRGE NO. 6354249D

O-RING TO DRGE NO. 6354249D

• AS PER TENDER DOCUMENT ANNEXURE L

• AS PER TENDER DOCUMENT ANNEXURE L

JACKET SECTION TO DRG NO. GCF TM- 282 (E) (REF DRG NO. 2A26-06-11, DS CAT NO. 1015-002845 )

JACKET SECTION TO DRG NO. GCF TM- 282 (E) (REF DRG NO. 2A26-06-11, DS CAT NO. 1015-002845 )

DRG NO. GCF TM- 282 (E) (REF DRG NO. 2A26-06-11, DS CAT NO. 1015-002845 )

• AS PER ANNEXURE-L

• AS PER ANNEXURE-L

JACKET SECTION TO DRG NO GCF TM 281 D (REF DRG NO. 2A26-06-10 D.S. CAT NO. 1015-002846)

JACKET SECTION TO DRG NO GCF TM 281 D (REF DRG NO. 2A26-06-10 D.S. CAT NO. 1015-002846)

DRG NO GCF TM 281 D (REF DRG NO. 2A26-06-10 D.S. CAT NO. 1015-002846)

• AS PER ANNEXURE-L

• AS PER ANNEXURE-L

JACKET SECTION 2A26- 06- 9

JACKET SECTION 2A26- 06- 9

2A26- 06- 9

• AS PER ANNEXURE-L

• AS PER ANNEXURE-L

ROD TEL TOOL COMB 81 MM MORTAR E1 COMPRISING OF. TO DRG. NO. (A) BRUSH CLEANING ARTILLERY ICM315A CAT.NO.M1/1015-004462. (B) EXTRACTOR BOMB ICM316A DS CAT NO.M1/1015-004494. (C) SOCKETS SKT SPNNER ICM-317A DS CAT.NO.M1/5120-007684. (D) ROD TELESCOPIC (ICM-174 SA) DS CAT. NO. M1/1005-007730.

ROD TEL TOOL COMB 81 MM MORTAR E1 COMPRISING OF. TO DRG. NO. (A) BRUSH CLEANING ARTILLERY ICM315A CAT.NO.M1/1015-004462. (B) EXTRACTOR BOMB ICM316A DS CAT NO.M1/1015-004494. (C) SOCKETS SKT SPNNER ICM-317A DS CAT.NO.M1/5120-007684. (D) ROD TELESCOPIC (ICM-174 SA) DS CAT. NO. M1/1005-007730.

DRG. NO. (A) BRUSH CLEANING ARTILLERY ICM315A CAT.NO.M1/1015-004462. (B) EXTRACTOR BOMB ICM316A DS CAT NO.M1/1015-004494. (C) SOCKETS SKT SPNNER ICM-317A DS CAT.NO.M1/5120-007684. (D) ROD TELESCOPIC (ICM-174 SA) DS CAT. NO. M1/1005-007730.

• AS PER ANNEXURE-L

• AS PER ANNEXURE-L

MACHINING OF 250KG STEEL SHELL

MACHINING OF 250KG STEEL BOTTLE CASTING (DRG.NO.OFM-10057 AS PER DRG.NO.-OFM-33042 & ANNEXURE-A.

OFM-10057 AS PER DRG.NO.-OFM-33042

• "1. Horizontal Boring Machine 2. Lathe/turning (CNC or manual) machine having suitable dimensions (Bed Length/Chuck Dia.) to accommodate the job. All the necessary 3. CNC Turing Centre of minimum 4m bed length and having: a. Swing over carriage wings: 600 mm, b. Turning over cross slide: 500 mm. attachments i.e. Steady Rest, Revolving centre etc. of suitable dimensions required for machining of the components"
• c. Chuck dia. : 500 mm d. Anti- vibration boring bar of suitable length to finish inside machining 4. Slotting machine/milling machine/Radial drill machine. 5. Welding Machine (Arc/Gas). 6. Facility for measuring of wall thickness (Ultrasonic Thickness Gauge machine/open ended caliper) and other measuring equipment

• 1. Band Saw Machine 2. Grinding Machine (Pneumatic Grinder)

MANUFACTURING OF HIGH MANGANES

MANUFACTURING OF HIGH MANGANESE STEEL CASTING OF TRACK SHOE TO DRAWING NO. 613-44-030-4A DULY HEAT TREATED,DRIFTED/MACHINED. CASTINGS ARE TO BE SUPPLIED IN FINISHED DRIFTED/MACHINED. CASTINGS ARE TO BE SUPPLIED IN FINISHED CONDITION AS PER ANNEXURE 'A'.

613-44-030-4A

• Induction furnace of minimum 500 kg capacity.Any type sand moulding line and core making process Heat Treatment Furnace, preferably Drop Bottom Quench Furnace to achieve the desired microstructure and properties.
• Pull type hydraulic Drifting/Broaching Machine of minimum 30 T capacity having 1000 mm stroke length minimum.

• TESTING FACILITIES AS PER ANNEXURE ‘A’ “TECHNICAL REQUIREMENTS FOR MANUFACTURING HEAT TREATMENT, DRIFTING/MACHINING AND MECHANICAL TESTING OF TRACK SHOE CASTING TO DRAWGING NO. 613-44-030-4A”. Spectrometer for testing the chemical composition of high manganese steel.

SHOCK ABSORBER OF DRG NO ADRDE-1119 FOR AN-32.

SHOCK ABSORBER OF DRG NO ADRDE-1119 FOR AN-32.

DRG NO ADRDE-1119

• Expanded Polystyrene Manufacturing Unit
• Carpentry Shop

• Loading Testing Facility or Tie up with such Unit
• NABL accredited/Manufacture/PSU/Govt. approved Lab

BOLT (M27 X 1.5-6G)

BOLT TO DRAWING NUMBER 219-35-158 (M27 X 1.5-6G) {CQA(HV)} TECHNICAL REQUIREMENTS AS PER GOST 4543-71, OST 3 4704-80,GOST 9454-78, 520 TY 1, GOST 1759.0-87, GOST 8479-70, GOST 9454-78, 520 TY 1, GOST 1759.0-87, GOST 8479-70, GOST 7505-89 PROCESS SHEETS- HOT UP SETTING, HIGH TEMPERING, ISOTHERMAL HARDENING, CADMIUM COATING.

DRAWING NUMBER 219-35-158

• 1. Forging hammer (min. 1 ton) of adequate capacity 2. CNC lathe/ centre lathe 3. Vertical Milling machine/VMC
• 1. Heat treatment (austempering)2. Cadmium plating

• TECHNICAL REQUIREMENTS AS PER GOST 4543-71, OST 3 4704-80,GOST 9454-78, 520 TY 1, GOST 1759.0-87, GOST 8479-70, GOST 9454-78, 520 TY 1, GOST 1759.0-87, GOST 8479-70, GOST 7505-89 PROCESS SHEETS- HOT UP SETTING, HIGH TEMPERING, ISOTHERMAL HARDENING, CADMIUM COATING.

BOLT (M20 X 1.5-6G

BOLT TO DRAWING NUMBER 172.55.026 (M20 x 1.5-6G){CQA(HV)}TECHNICAL REQUIREMENTS AS PER GOST 4543-71, OST 3 4704-80,GOST 9454-78, 520 TY 1, GOST 1759.0-87 PROCESS SHEETS- HOT SETTING, HIGH TEMPERING, ISOTHERMAL HARDENING, CADMIUM COATING.

• 1. Forging hammer (min. 1 ton) of adequate capacity 2. CNC lathe/centre lathe 3. Vertical Milling machine/VMC
• 1. Heat treatment (austempering) 2. Cadmium plating

• TECHNICAL REQUIREMENTS AS PER GOST 4543-71, OST 3 4704-80,GOST 9454-78, 520 TY 1, GOST 1759.0-87 PROCESS SHEETS- HOT SETTING, HIGH TEMPERING, ISOTHERMAL HARDENING, CADMIUM COATING.

ZINC WIRE 2 MM DIA

ZINC WIRE 2 MM DIA.IN LINE TO LINE SPOOL 15 KG , GRADE Z 2 AS PER SPECN.BSEN 1179:2003, 99.99% PURITY.

NA

• 1.Melting furnace set 2. Wire rolling machine 3. Wire butt welding machine 4. Wire drawing machines (Horizontal/vertical) 5. Arrangement for in line to line spool packing of 15 Kgs

• 1.Melting furnace set 2. Wire rolling machine 3. Wire butt welding machine 4. Wire drawing machines (Horizontal/vertical) 5. Arrangement for in line to line spool packing of 15 Kgs