BLANK FOR CARTRIDGE LIFT ( PAG-0054/B2) AS PER RFI SK-8974-BG FOR 12 BORE PUMP ACTION GUN. STEEL STRIP 167+ -0.2 X MULTIPLE OF 3000 MM. X 2.20-0.05 THICKNESS. MATERIAL :IS:2507-1975,50 CR4V2, ALT.MAT. :EN47
Specification
BLANK FOR CARTRIDGE LIFT ( PAG-0054/B2) AS PER RFI SK-8974-BG FOR 12 BORE PUMP ACTION GUN. STEEL STRIP 167+ -0.2 X MULTIPLE OF 3000 MM. X 2.20-0.05 THICKNESS. MATERIAL :IS:2507-1975,50 CR4V2, ALT.MAT. :EN47
“VEHICLE REAR VIEW CAMERA SYSTEM” CONSISTING OF LCD MONITOR CAMERA WITH NIGHT VISION CAPABILITY, CONNECTING CABLES AND ACCESSORIES FOR INSTALLATION AND ALONG WITH INSTALLATION GUIDE, OPERATING AND MAINTENANCE MANUAL AS PER SPECIFICATION OF ANNEXURE-A & DRG NO. 2689-57-31, 2713-57-31, 2714-57-31.
Rubber Sheet (10 mm THK) of BP SML for Trooper Floor, as per drg. Enclosed (1 set consisting of 4 rubber sheet) Drg No. 6005-47-41.Specific Gravity 1.4 to 1.5 shore hardness 55-65. in black colour.
Specification
Specific Gravity 1.4 to 1.5 shore hardness 55-65. in black colour.
CASES C-128 MK-13 (NEW) WITHOUT PARTITION AND GROOVES AS PER SPECN/DRG.
Specification
CASES C-128 MK-13 (NEW) WITHOUT PARTITION AND GROOVES AS PER SPECN/DRG. PARTICULARS GIVEN BELOW. DRAWING:IA 1031 DC 36234-A DT: 04-02-1997 AND SPECN: IA948 ( A,F ) DC 36081-A READ WITH AIDE MEMOIRE - W/4.
BAGS CALICO FOR 40 KG M.T PROPELLANTS MADE OUT OF CALICO CLOTH AND AS PER CFA DRG NO.1037 DATED 24.12.2013 SPECN-IS-5088-1982 (FIRST REV) WITH AMENDMENT NO.2 OCT 1996 REAFD 2017-FOR CLOTH
CALICO BAG TO CFA SKETCH NO: 932.DT.19.9.2001 WITH AMENDMENT NO.2 FOR BAG SPECN.IS-5088-1982 (FIRST REV) WITH AMENDMENT NO.2 OCT 1996 REAFD. 2017- FOR CLOTH
SPIRIT RECTIFIED TO SPECN IS: 323-2009 (II REVISION REAFFIRMED 2019 DC NO.5009-ME DT.07.01.2011 DENATURED WITH 0.5% OF ACETONE TO SPECN. IS: 4117/2008 (SECOND REVISION) REAFFIRMED 2019
CALCIUM CARBONATE FOR EXPLOSIVES TYPE II PRECIPITATED MATERIAL RETAINED ON 90 MICRON IS SIEVE - NIL (PERCENT BY MASS) FOR USE IN PROPELLANTS SPECN: IS 7633 - 1982 REAFFIRMED 2016. (FIRST REVISION) AMENDMENT NO. 1 DC 5372-ME DT.28-07-2015
COTTON SEWING THREAD 210 d TEX/2(28 S/2) SCOURED FOR AEROSPACE PURPOSES.(IN THE TUBE OF 1000 MTRS EACH)
Specification
SPECN. NO.: IS : 1376-1998 Except that :- i)In appearance Finish and other respects not defined in this Specn. the material shall conform to the corresponding sealed pattern held in the custody of the Controller, CQAT&C Kanpur. (ii) Sampling Plan & Criteria of conformity As per CQAT&C/QAI/TC-8/13. (III) ph Value should be 6.0 to 8.5 PACKING & MARKING : AS PER SCHEDULE NO. CQAT&C/PMS/36(a).
SPECN.NO. :AS PER FOLLOWING PARTICULARS.
a)Width 132 cms., (b)Thickness in mm at 200 gm/sq.cm 0.45,
(c)Weight/mt/Sq (in Gms) 107 Max.,(d) No. of mesh/Sq.inch- 140 ,(e) Tearing strength in kg.in both direction 3.2 min.(f)Bursting strength in kg. 11 kg. min, (g) B.S.in kg 5X20 cms strip length direction 40 min, width direction 24 min.
(h)Elongation at break length direction : 40%
width direction : 92.5 to 100%
SPECN-IS:4741-1965(Amdt-1.Reafirmed 2003) except for pull strength, which should be 4Kgf(Min). For Plastic Washer Thickness (under pressure 200g/cm squire) 1.14mm & Dia12.52 mm of best trade quality
Specification
IS:4741-1965(Amdt-1.Reafirmed 2003) except for pull strength, which should be 4Kgf(Min). For Plastic Washer Thickness (under pressure 200g/cm squire) 1.14mm & Dia12.52 mm of best trade quality
