BAKELITE WASHER FOR 155 MM ELECTRONIC FUZE

BAKELITE WASHER FOR 155 MM ELECTRONIC FUZE

• as per attachment

• as per attachment

MODE SELECTOR SWITCH HOUSING ASSEMBLY AS PER ODC MTPF DRG NO 740 13 21 00

MODE SELECTOR SWITCH HOUSING ASSEMBLY AS PER ODC MTPF DRG NO 740 13 21 00

• AS PER ATTACHMENT

• AS PER ATTACHMENT

ELECTRONIC MODULE HOUSING AS PER ODC MTPF DRG NO 740 12 21 00

ELECTRONIC MODULE HOUSING AS PER ODC MTPF DRG NO 740 12 21 00

• as per attachment

• as per attachment

UPPER BATTERY HOUSING FOR 155 MM ELECTRONIC FUZE AS PER ODC MTPF DRG NO 770 22 31 00

UPPER BATTERY HOUSING FOR 155 MM ELECTRONIC FUZE AS PER ODC MTPF DRG NO 770 22 31 00

• AS PER ATTACHMENT

• AS PER ATTACHMENT

LOWER BATTERY HOUSING FOR 155 MM ELECTRONIC FUZE AS PER ODC MTPF DRG NO 770 22 32 00

LOWER BATTERY HOUSING FOR 155 MM ELECTRONIC FUZE AS PER ODC MTPF DRG NO 770 22 32 00

• AS PER ATTACHMENT

• AS PER ATTACHMENT

NOSE OGIVE AS PER ODC MTPF DRG NO 140 01 12 00 (6120170003)

NOSE OGIVE AS PER ODC MTPF DRG NO 140 01 12 00

• as per attachment

• as per attachment

STEEL ROD 4.0MM DIA TO SPECN STEEL BS 970 PT 1:1983 GRADE 835M30.

STEEL ROD 4.0MM DIA TO SPECN STEEL BS 970 PT 1:1983 GRADE 835M30.

• Melting and Rolling

• 1) Chemical & Mechanical properties as per std. given drawing 2) Dimensional inspection for all dimensions given in the drawing & other parameter which are mentioned in relevant drawing.

SECONDRY REFIND AOD/VOD QUALITY STEEL ROD 46MM DIA CONFORMING TO THE SPECIFICTION JSS 9510-06:2012 CODE REF "B" IN HOT ROLLED ,ANNEALED AND PEELED CONDT. IN MULTIPLE OF 413MM LENGTH TEST PIECETO BE TESTED IN T-1 CONDTION.MACROET-CH TESTING TO CON IS 13015:1991 & NMIR TEST

SECONDRY REFIND AOD/VOD QUALITY STEEL ROD 46MM DIA CONFORMING TO THE SPECIFICTION JSS 9510-06:2012 CODE REF "B" IN HOT ROLLED ,ANNEALED AND PEELED CONDT. IN MULTIPLE OF 413MM LENGTH TEST PIECETO BE TESTED IN T-1 CONDTION.MACROET-CH TESTING TO CON IS 13015:1991 & NMIR TEST

• Melting and rolling

• 1) Chemical & Mechanical properties as per std. given drawing 2) Dimensional inspection for all dimensions given in the drawing & other parameter which are mentioned in relevant drawing.

PULL THROUGH 5.56MM1A (NYLON) TO DS CAT NO. 1005-557944 DC(I) NO. 26532-SA , DT. 30-07-10

PULL THROUGH 5.56MM1A (NYLON) TO DS CAT NO. 1005-557944 DC(I) NO. 26532-SA , DT. 30-07-10

S CAT NO. 1005-557944 DC(I) NO. 26532-SA , DT. 30-07-10

• Machining & Assy.

• 1) Chemical & Mechanical properties as per std. given drawing 2) Dimensional inspection for all dimensions given in the drawing & other parameter which are mentioned in relevant drawing.

TRIGGER ASSEMBLY TO DS CAT NO 1005 006589 DC(1) NO 26375 SA DT 05/09/07 WITH DETAILS OF LATEST ISSUE INSPECTION TO BE GOVERN BY RELEVANT CLAUSES OF SPECN JSS-1005-04 2006 OF LATE ST ISSUE and ANY OTHER ACCEPTANCE CRITERIA TO BE PROVIDED BY CQA (SA) ISHAPORE

TRIGGER ASSEMBLY TO DS CAT NO 1005 006589 DC(1) NO 26375 SA DT 05/09/07 WITH DETAILS OF LATEST ISSUE INSPECTION TO BE GOVERN BY RELEVANT CLAUSES OF SPECN JSS-1005-04 2006 OF LATE ST ISSUE and ANY OTHER ACCEPTANCE CRITERIA TO BE PROVIDED BY CQA (SA) ISHAPORE

1005-006589

• Machining & Assy.

• 1) Chemical & Mechanical properties as per std. given drawing 2) Dimensional inspection for all dimensions given in the drawing & other parameter which are mentioned in relevant drawing.

FILTER SOLDERING TO DRG BOF 6116637

FILTER SOLDERING TO DRG BOF 6116637

• FILTER SOLDERING TO DRG BOF 6116637

• PART B

MOD ENGINE HOUSING TO INTEGRATE CUMMINS ENGINE FOR 155MM FH GUNS

MOD ENGINE HOUSING TO INTEGRATE CUMMINS ENGINE FOR 155MM FH GUNS

• AS PER TENDER DOCUMENT ANNEXURE L

• AS PER TENDER DOCUMENT ANNEXURE L

SHAFT TO DRAWING NO.3054134

SHAFT TO DRAWING NO.3054134

• AS PER TENDER DOCUMENT ANNEXURE L

• AS PER TENDER DOCUMENT ANNEXURE L

SHAFT TO DRAWING NO.3054133

SHAFT TO DRAWING NO.3054133

• AS PER TENDER DOCUMENT ANNEXURE L

• AS PER TENDER DOCUMENT ANNEXURE L

PROTECTOR RIGHT TO DRG.NO.1146579

PROTECTOR RIGHT TO DRG.NO.1146579

• AS PER TENDER DOCUMENT ANNEXURE L

• AS PER TENDER DOCUMENT ANNEXURE L

PROTECTOR LEFT TO DRAWING.NO.1146577

PROTECTOR LEFT TO DRAWING.NO.1146577

• AS PER TENDER DOCUMENT ANNEXURE L

• AS PER TENDER DOCUMENT ANNEXURE L

RECOIL INDICATOR TO DRAWING NO.1144034

RECOIL INDICATOR TO DRAWING NO.1144034

• AS PER TENDER DOCUMENT ANNEXURE L

• AS PER TENDER DOCUMENT ANNEXURE L

LEAF SPRING REAR SIGHT DRG. NO. 0204 03 02 00 01 009 00DC

LEAF SPRING REAR SIGHT DRG. NO. 0204 03 02 00 01 009 00DC

0204 03 02 00 01 009 00DC

• forming
• forming
• forming
• forming
• forming

• Chemical & Mechanical properties as per std. given drawing /Specification.
• Dimensional inspection for all dimension given in the drawing & other parameter which are mentioned in relevant drawing/specification.
• Chemical & Mechanical properties as per std. given drawing /Specification.
• Dimensional inspection for all dimension given in the drawing & other parameter which are mentioned in relevant drawing/specification.
• Chemical & Mechanical properties as per std. given drawing /Specification.

DISC to Drg No 765-12-342

mentioned in Attachments and specifications.

• Please find attachment.

• Please find attachment.

PAWL GUIDE CARTRIDGE DS CAT NO. 1005-006626 DC(I) NO. 27022-SA DT.31.01.17

PAWL GUIDE CARTRIDGE DS CAT NO. 1005-006626 DC(I) NO. 27022-SA DT.31.01.17

DS CAT NO. 1005-006626 DC(I) NO. 27022-SA DT.31.01.17

• Machining

• Chemical & Mechanical Properties as per std. given drawing
• Dimensional inspection, for all dimensions given in the drawing and other parameters which are mentioned in the relevant drawing

Fore Sight Housing to DS CAT No. 1005-000426 in without Heat Treatment Condition

Fore Sight Housing to DS CAT No. 1005-000426 in without Heat Treatment Condition

DS CAT No. 1005-000426

• Machining

• Chemical & Mechanical Properties as per std. given drawing
• Dimensional inspection, for all dimensions given in the drawing and other parameters which are mentioned in the relevant drawing

EXTRACTOR (SMALL ARMS CARTRIDGE)DS CAT NO.1005-006633 DC NO.25387-SA DT.07.06.02IN FINISHED CONDN.,

EXTRACTOR (SMALL ARMS CARTRIDGE)DS CAT NO.1005-006633 DC NO.25387-SA DT.07.06.02IN FINISHED CONDN.,

DS CAT NO.1005-006633

• Machining

• Chemical & Mechanical Properties as per std. given drawing
• Dimensional inspection, for all dimensions given in the drawing and other parameters which are mentioned in the relevant drawing

Steel Blank of Cylinder Gas To Drg. No. SKM-889* without heat treatment (Steel Forging SKM-306*6 LF No. 0144079003 to be issued by SAF against B/G).

Steel Blank of Cylinder Gas To Drg. No. SKM-889* without heat treatment (Steel Forging SKM-306*6 LF No. 0144079003 to be issued by SAF against B/G).

SKM-889*

• Forging/Machining

• Chemical & Mechanical Properties as per std. given drawing
• Dimensional inspection, for all dimensions given in the drawing and other parameters which are mentioned in the relevant drawing

SHOCK STRUT KHAKI OF DRG NO ADRDE-1426-A FOR AN-32 PLATFORM

SHOCK STRUT KHAKI OF DRG NO ADRDE-1426-A FOR AN-32 PLATFORM

ADRDE-1426-A

• carpentry shop or it up
• Design, Modelling and Manufacturing aspects of Honeycomb Sandwich Structures machine or it up unit

• chemical testing lab or it up
• Mechanical testing lab or it up

SHOCK STRUT KHAKI OF DRG NO ADRDE-1426-A FOR AN-32 PLATFORM

SHOCK STRUT KHAKI OF DRG NO ADRDE-1426-A FOR AN-32 PLATFORM

ADRDE-1426-A

• carpentry shop or it up
• Design, Modelling and Manufacturing aspects of Honeycomb Sandwich Structures machine or it up unit

• chemical testing lab or it up
• Mechanical testing lab or it up

GASKET (TAPERED) OF DRG. NO.ADRDE-1438 FOR AN-32 PLATFORM (Item Code:6245001438)

GASKET (TAPERED) OF DRG. NO.ADRDE-1438 FOR AN-32 PLATFORM (Item Code:6245001438)

DRG. NO.ADRDE-1438

• expanded polystylerene manufacturing unit or tie up
• carpentry shop or tie up

• chemical testing or tie up
• mechnical testing or tie up

GASKET SMALL OF DRG NO ADRDE-1117 FOR AN-32 PLATFORM

GASKET SMALL OF DRG NO ADRDE-1117 FOR AN-32 PLATFORM

DRG NO ADRDE 1117

• expanded polystyrene manufacturing unit or tie up
• carpentry unit or tie up

• material testing facility of tie up.
• chemical testing
• mechanical testing

GASKET LARGE OF DRG. NO.ADRDE-1118 FOR AN-32 PLATFORM

GASKET LARGE OF DRG. NO.ADRDE-1118 FOR AN-32 PLATFORM

DRG. NO.ADRDE-1118

• expanded polystyrene manufacturing unit or tie up
• carpentry unit or tie up

• chemical testing or tie up
• mechanical testing or tie up

Multiple Limit Switch 4 Plunger Chisel Type Plunger Spacing 8mm Switching Element ES552 Item Code SN04 D08 552 Make Teknic Control Gear OR equivalent

Multiple Limit Switch 4 Plunger Chisel Type Plunger Spacing 8mm Switching Element ES552 Item Code SN04 D08 552 Make Teknic Control Gear OR equivalent

• 1. Die Casting / Moulding 2. Anodizing Plant 3. Precision Machining 4. Precision Presses 5. Laser Marking for piece parts and finished assemblies 6. The quality assurance process at manufacturing facilities must be ISO 9001 and ISO 14001 certified

• Adequate in house test facilities for mechanical & electrical testing of the components, including rubber components

CASE CARRYING FRP FOR SIGHT NIGHT VISION PASSIVE 5.56 MM RIFLE AS PER DRG. NO. MCT 1678 2

CASE CARRYING FRP FOR SIGHT NIGHT VISION PASSIVE 5.56 MM RIFLE AS PER DRG. NO. MCT 1678 2

• THE ITEM IS NOT MENTIONED IN ANNEXURE A OF LETTER NO. OFB/108/Online VR/QC dtd. 12.02.2019

• THE ITEM IS NOT MENTIONED IN ANNEXURE A OF LETTER NO. OFB/108/Online VR/QC dtd. 12.02.2019

FABRICATION OF JACKET WIND CHEATER SPCNS: - AS PER SPECIFICATION NO. IND/TC/4677 & AMENDMENT NO. 1

FABRICATION OF JACKET WIND CHEATER SPCNS: - AS PER SPECIFICATION NO. IND/TC/4677 & AMENDMENT NO. 1

• as per attached list (Manufacturing Technology Files )

• as per attached list (Testing / Inspection Facility Files )

SPRING TYPE CYLINDRICAL PLASTIC STOPPER BLACK [PROVISIONAL SPECIFICATION NO.OCFS/PLASTIC STOPPER BLACK/NYLN 6 AS PER RELEVANT CLAUSE OF SPECIFICATION - OCF, SHAHJAHANPUR]

SPRING TYPE CYLINDRICAL PLASTIC STOPPER BLACK [PROVISIONAL SPECIFICATION NO.OCFS/PLASTIC STOPPER BLACK/NYLN 6 AS PER RELEVANT CLAUSE OF SPECIFICATION - OCF, SHAHJAHANPUR]

• as per attached list (Manufacturing Technology Files )

• as per attached list (Testing / Inspection Facility Files )

SPRING TYPE CYLINDRICAL PLASTIC STOPPER WHITE PROVISIONAL SPECIFICATION NO. OCFS/PLASTIC STOPPER WHITE/NYLON 6 AS PER RELEVANT CLAUSE OF SPECIFICATION- OCF, SHAHJAHANPUR

SPRING TYPE CYLINDRICAL PLASTIC STOPPER WHITE PROVISIONAL SPECIFICATION NO. OCFS/PLASTIC STOPPER WHITE/NYLON 6 AS PER RELEVANT CLAUSE OF SPECIFICATION- OCF, SHAHJAHANPUR

• as per attached list (Manufacturing Technology Files )

• as per attached list (Testing / Inspection Facility Files )

COUPLING ASSY. CONTAINING OF:- COUPLING SUB ASSY TO DRG NO.ADRDE/1403-01-02A-20 NOS IN EACH SET.COUPLING NUT TO DRG NO. ADRDE/1403-01-03 -20 NOS IN EACH SET.LOCK WASHER TO DRG NO.ADRDE/1403-01-04 -20 NOS IN EACH SET

COUPLING ASSY. CONTAINING OF:- COUPLING SUB ASSY TO DRG NO.ADRDE/1403-01-02A-20 NOS IN EACH SET.COUPLING NUT TO DRG NO. ADRDE/1403-01-03 -20 NOS IN EACH SET.LOCK WASHER TO DRG NO.ADRDE/1403-01-04 -20 NOS IN EACH SET

• lathe machine
• drilling machine or tie up
• milling machine
• chemical testing or tie up

• mechanical testing or tie up

AS PER DRG.

AS PER DRG.

DS CAT No. Y3/6230-000012

• Optical

• Chemical & Mechanical Properties as per std. given drawing
• Dimensional inspection, for all dimensions given in the drawing and other parameters which are mentioned in the relevant drawing

CLAMP RP 971632 CASTING

CLAMP RP -971632 CASTING TO DRG. NO. RP 200031

• as per annexure L

• as per annexure L

CLAMP RP 971633 CASTING

CLAMP - RP 971633 CASTING TO DRG. NO. RP 200032

• as per annexure L

• as per annexure L

FORK RP 971629 CASTING

FORK - RP 971629 (CASTING).

• as per annexure L

• as per annexure L

BRACKET RP 971634 CASTING

BRACKET - RP 971634, CASTING TO DRG. NO. RP200038

• as per annexure L

• as per annexure L

BRACKET LEFT CAST9NG DRG NO 5168972

BRACKET LEFT CASTING TO DRG.NO.5168972

• as per annexure L

• as per annexure L

TRAIL SPADE DRG 3051623

ST.CASTING OF TRAIL SPADE TO DRG.NO.GCF/50/39471(REF DRG NO. 3051623)(WEIGHT OF CASTING SHOULD NOT EXCEED 70 KG

• as per annexure L

• as per annexure L

CASTING OF BRACKET DRG 6333961

CASTING.OF BRACKET.TO DRG NO.6333961.CONFORMING THE DRG / NO 6333961.)

• as per annexure L

• as per annexure L

HANDLE LEFT INV CASTING 4076880

HANDLE LEFT INVESTMENT CASTING MTRL. TO DRG.NO.4076880

• as per annexure L

• as per annexure L

CASTING PISTON GUIDE RING 5160503

CASTING OF PISTON GUIDE RING TO DRG.NO.BOF-5160503 TO SPECN: IS:1865-91,GD SG 500/7 WITH METALLOGRAPHY TEST

• as per annexure L

• as per annexure L

CASTING PISTON GUIDE RING 5139398

CASTING OF PISTON GUIDE RING TO DRG NO. 5139398. SPHEROIDAL CAST IRON TO SPECN IS:1865-91 GD.SG 500/7

• as per annexure L

• as per annexure L

CASTING FOR PISTON GCFMN 5461 E

"PISTON" (CASTING) TO DRG NO.GCF-MN-5461(E)(REF DRG NO 4071780) TO SPECN NO:IS:1865-91,(GD SG 500/7

• as per Annexure L

• as per Annexure L

STEEL ROUND AS PER GRADE SS/B-27 TO SPECN.JSS:9510-01 1982 AS ROLLED/ FORGED, NORMALIZED, SIZE 160+5.0/-0.0 MM DIA PARTED IN LENGTH OF 420 +/- 5 MM. FOR MANUFACTURING OF PROOF SHOT 155MM ERFB SLUG. MATERIAL SHALL BE PROOF MACHINED AND ULTRASONIC TESTED FOR INTERNAL CRACKS

SS/B-27 TO SPECN.JSS:9510-01 1982

• "Essential Eligibility Criteria: 1) Firm must be manufacturer for Alloy Steel Bars/Billets . Offers from manufacturer /OEM will only be accepted." 2) Firm should be able to supply minimum 200 nos. of parted, proof machined, UT Tested Steel billet of specified dimension per heat / Cast. "3. The vendor should have following manufacturing facilities with them: a) Blast Furnace with L.D. converter (Basic Oxygen Furnace) or Electric Arc Furnace Or induction Furnace." b) Continuos caster or Bottom pouring ingot casting facility c)Ladle Refining furnace along with Argon purging system. d) Vacuum degassing furnace along with Argon purging system. e) Soaking Pits or Pre heating Furnace suitable for processing of tendered item. f) Forging or Rolling Mill to maintain adequate reduction ratio to obtain desired metallurgical micro structure. g) Steel Round Parting machine: Band Saw/CNC Parting/Circular Saw/Water Jet. h) Annealing or Normalising Furnaces

• i) Optical emission Spectrometer for chemical analysis. "j) Mechanical test facilities, as applicable. "k) Metallographic facilities for Micro and Macro Analysis. "l) Ultrasonic Testing facilities with qualified personnel. m) Carbon Sulphur analzer

STEEL ROUND AS PER GRADE SS/B-27 TO SPECN.JSS:9510-01 1982 AS ROLLED/ FORGED, NORMALIZED, SIZE 160+5.0/-0.0 MM DIA PARTED IN LENGTH OF 410 +/- 5 MM. FOR MANUFACTURING OF PROOF SHOT 155MM ERFB SLUG. MATERIAL SHALL BE PROOF MACHINED AND ULTRASONIC TESTED FOR INTERNAL CRACKS

TO SPECN.JSS:9510-01 1982

• "Essential Eligibility Criteria: 1) Firm must be manufacturer for Alloy Steel Bars/Billets . Offers from manufacturer /OEM will only be accepted." 2) Firm should be able to supply minimum 200 nos. of parted, proof machined, UT Tested Steel billet of specified dimension per heat / Cast. "3. The vendor should have following manufacturing facilities with them: a) Blast Furnace with L.D. converter (Basic Oxygen Furnace) or Electric Arc Furnace Or induction Furnace." b) Continuos caster or Bottom pouring ingot casting facility c)Ladle Refining furnace along with Argon purging system. d) Vacuum degassing furnace along with Argon purging system. e) Soaking Pits or Pre heating Furnace suitable for processing of tendered item. f) Forging or Rolling Mill to maintain adequate reduction ratio to obtain desired metallurgical micro structure. g) Steel Round Parting machine: Band Saw/CNC Parting/Circular Saw/Water Jet. h) Annealing or Normalising Furnaces.

• i) Optical emission Spectrometer for chemical analysis. "j) Mechanical test facilities, as applicable. "k) Metallographic facilities for Micro and Macro Analysis. " "l) Ultrasonic Testing facilities with qualified personnel. m) Carbon Sulphur analzer

BODY ASSY. DRG. NO. BSH6.110.050 SB

AS PER ENCLOSED DRAWING

BSH6.110.050 SB

• SL. NO. 65 OF ANNEXURE A TO OFB LETTER NO. OFB/108/ONLINE VR/QC DTD. 12.12.2019

• SL. NO. 65 OF ANNEXURE A TO OFB LETTER NO. OFB/108/ONLINE VR/QC DTD. 12.12.2019

BUFFER BODY FOR PLATE BACK ASSY. TO DRG.NO.DS CAT NO.1005- 0 06645 NOTE:STEEL FORGING WILL BE SUPPLIED BY SAF ON FREIGHT TO PAY BASIS AGAINST THE BANK GUARANTEE. DC(I) NO.26753-SA DATED 17.04.15

BUFFER BODY FOR PLATE BACK ASSY. TO DRG.NO.DS CAT NO.1005- 0 06645 NOTE:STEEL FORGING WILL BE SUPPLIED BY SAF ON FREIGHT TO PAY BASIS AGAINST THE BANK GUARANTEE. DC(I) NO.26753-SA DATED 17.04.15

DRG.NO.DS CAT NO.1005- 0 06645

• Machining

• Chemical & Mechanical Properties as per std. given drawing
• Dimensional inspection, for all dimensions given in the drawing and other parameters which are mentioned in the relevant drawing

ASSY CENTRE CONTACT FOR RGB-60 AS PER DRG.NO:NASK 1068/8, NASK 1068/8/1, NASK 1068/8/2, NASK 1068/8/3. (L..F No. 0126701688)

ASSY CENTRE CONTACT FOR RGB-60 AS PER DRG.NO:NASK 1068/8, NASK 1068/8/1, NASK 1068/8/2, NASK 1068/8/3. (L..F No. 0126701688)

• Centre Lathe, drilling and tapping facility, soldering facility

• Vernier caliper, inside & outside micrometer, Plating thickness measuring gauge, meggar for insulation checking and any other instrument required for inspection of the item

LAMP AIMING MG MK-3 TO DS CAT NO.1005-000720 (3 SHEETS) SHT NO.1 OF 3 DC(I) NO.24588-SA DT. 22-11-99 SHT NO.2 OF 3 DC(I) NO.23618-SA DT. 16-12-96 SHT NO.3 OF 3 DC(I) NO.23590-SA DT. 26-11-96 IN FINISHED CONDITION.

LAMP AIMING MG MK-3 TO DS CAT NO.1005-000720 (3 SHEETS) SHT NO.1 OF 3 DC(I) NO.24588-SA DT. 22-11-99 SHT NO.2 OF 3 DC(I) NO.23618-SA DT. 16-12-96 SHT NO.3 OF 3 DC(I) NO.23590-SA DT. 26-11-96 IN FINISHED CONDITION.

DS CAT NO.1005-000720 (3 SHEETS)

• Optical Manufacturing technology

• Chemical & Mechanical Properties as per std. given drawing
• Dimensional inspection, for all dimensions given in the drawing and other parameters which are mentioned in the relevant drawing
• Chemical & Mechanical Properties as per std. given drawing
• Chemical & Mechanical Properties as per std. given drawing
• Chemical & Mechanical Properties as per std. given drawing

diaphragm nozzle plate

diaphragm nozzle plate

• Steel casting, Machining Facility like center lathe, drilling and tapping facility and chrome plating

• vernier caliper, inside & outside micrometer, plating thickness measuring gauge and any other instruments required for inspection of the item

SPRING BARREL LOCKING CATCH,DS CAT NO.5360 - 003079 IN F/D CONDITION. DC(I) NO. 25393-SA, DT. 11-06-2002

SPRING BARREL LOCKING CATCH,DS CAT NO.5360 - 003079 IN F/D CONDITION. DC(I) NO. 25393-SA, DT. 11-06-2002

DS CAT NO.5360 - 003079

• Spring Coiling

• Chemical and Mechanical Properties as per std. given drawing

Diaphragm for RGB 60 as per drawing no.NASK1068/7 LF No.0126701523

Diaphragm for RGB 60 as per drawing no.NASK1068/7 LF No.0126701523

• Steel Casting, Machining facilities- centre lathe, drilling and tapping facility and chrome plating

• Vernier caliper, Inside & Outside micrometer, plating thickness measuring gauge, any other instruments required for inspection

PHOS.BRONZE ROD 32MM DIA TO SPECN.BS:2874:1969 PB102M

PHOS.BRONZE ROD 32MM DIA TO SPECN.BS:2874:1969 PB102M

• Melting and Rolling
• Melting and Rolling
• Melting and Rolling
• Melting and Rolling
• Melting and Rolling

• Chemical & Mechanical properties as per SPECN. BS:2874:1969 PB102M
• Chemical & Mechanical properties as per SPECN. BS:2874:1969 PB102M
• Chemical & Mechanical properties as per SPECN. BS:2874:1969 PB102M
• Chemical & Mechanical properties as per SPECN. BS:2874:1969 PB102M
• Chemical & Mechanical properties as per SPECN. BS:2874:1969 PB102M

PT.NO.69 DS CAT NO 5360-000518 DC(I) NO.27021-SA DT. 28.01.17 IN FINISHED CONDITION.

PT.NO.69 DS CAT NO 5360-000518 DC(I) NO.27021-SA DT. 8.01.17 IN FINISHED CONDITION.

DS CAT NO 5360-000518 DC(I) NO.27021-SA DT.28.01.17

• Spring Coiling

• Chemical & Mechanical Properties as per std. given drawing
• Dimensional inspection, for all dimensions given in the drawing and other parameters which are mentioned in the relevant drawing

MED SUPPORT AS PER ODC MTPF DRG NO 770 28 33 00 FOR 155 MM ELECTRONIC FUZE

MED SUPPORT AS PER ODC MTPF DRG NO 770 28 33 00 FOR 155 MM ELECTRONIC FUZE

DRG NO 770 28 33 00

• ATTACHED

• ATTACHED

ASSY. ROD FOR PARA FRAME H.D SYSTEM TO DRG NO ADRDE 1406-01 (B)

ASSY. ROD FOR PARA FRAME H.D SYSTEM TO DRG NO ADRDE 1406-01 (B)

ADRDE 1406-01 (B)

• BAND SAW MMACHINE/CUTTING EQU FOR PINE CUTTING
• LATHE MACHNE
• DRILLING MACHINE
• MILLING MACHINE
• HEAT TREATMENT PLANT FACILITY OR TIE UP WITH OTHER

• CHEMICAL TESTING OR TIE WITH NABL LAB
• MECHANICAL TESTING OR TIE UP
• PAINTING FACILITY OR TIE UP

FLOOR PLATE FOR TRAIL SPADES TO DRAWING NO.GCF/50/40333

FLOOR PLATE FOR TRAIL SPADES TO DRAWING NO.GCF/50/40333

• AS PER TENDER DOCUMENT

• AS PER TENDER DOCUMENT

WOODEN SUPPORT FOR BARREL TO DRAWING NO.GCF/50/40332

WOODEN SUPPORT FOR BARREL TO DRAWING NO.GCF/50/40332

• AS PER TENDER DOCUMENT

• AS PER TENDER DOCUMENT

PALLET FOR SHELL LOADING TO DRAWING NO.GCF/50/40226

PALLET FOR SHELL LOADING TO DRAWING NO.GCF/50/40226

• As per tender document part L

• As per tender document part L

FLUID INDICATOR 1133972/5161642

FLUID INDICATOR 1133972/5161642

• As per tender document part L

• As per tender document part L

FLUID INDICATOR 1141826/4077480

FLUID INDICATOR 1141826/4077480

• As per tender document part L

• As per tender document part L

BUMPER TO PART NO.5179367

BUMPER TO PART NO.5179367

• As per tender document part L

• As per tender document part L

LIST TO PART NO.GCF/50/39243.

LIST TO PART NO.GCF/50/39243.

• As per tender document part L

• As per tender document part L

RUBBER BAND TO PART NO.6307134

RUBBER BAND TO PART NO.6307134

• As per tender document part L

• As per tender document part L

RUBBER TILE TO PART NO.6324462

RUBBER TILE TO PART NO.6324462

• As per tender document part L

• As per tender document part L

RUBBER PROTECTOR TO PT.NO.6358836

RUBBER PROTECTOR TO PT.NO.6358836

• As per tender document part L

• As per tender document part L

RUBBER PROTECTOR TO PT.NO.6358835

RUBBER PROTECTOR TO PT.NO.6358835

• As per tender document part L

• As per tender document part L

RUBBER PROTECTOR TO PT.NO.5175832

RUBBER PROTECTOR TO PT.NO.5175832

• As per tender document part L

• As per tender document part L

RUBBER BUFFER TO PART NO.5177384

RUBBER BUFFER TO PART NO.5177384

• As per tender document part L

• As per tender document part L

BELLOWS TO PART NO.5158502

BELLOWS TO PART NO.5158502

• As per tender document part L

• As per tender document part L

SHOCK ABSORBER TO PART NO.6298889

SHOCK ABSORBER TO PART NO.6298889

• As per tender document part L

• As per tender document part L

PROTECTOR TO PART NO.4073401

PROTECTOR TO PART NO.4073401

• As per tender document part L

• As per tender document part L

RUBBER DAMPER TO PART NO.6335329

RUBBER DAMPER TO PART NO.6335329

• As per tender document part L

• As per tender document part L

SPRING TO DRG NO.6296026

SPRING TO DRG NO.6296026

• As per tender document part L

• As per tender document part L

SPRING TO PART NO.6302057

SPRING TO PART NO.6302057

• As per tender document part L

• As per tender document part L

SPRING TO DRG.NO.5156360

SPRING TO DRG.NO.5156360

• As per tender document part L

• As per tender document part L

SPRING TO PART NO.5160413

SPRING TO PART NO.5160413

• As per tender document part L

• As per tender document part L