CARDEN RING LF NO 7440200891

CARDEN RING LF NO 7440200891

AL8244009

SPRING LF NO 7440200746

SPRING LF NO 7440200746

AL8387696

TERMINAL BLOCK LF NO 7440200727

TERMINAL BLOCK LF NO 7440200727

AL5282083-01

TERMINAL BLOCK LF NO 7440200726

TERMINAL BLOCK LF NO 7440200726

AL5282083

STOCK BUTT FOR .22" SPORTING RIFLE.

STOCK BUTT FOR .22" SPORTING RIFLE.

SPR/016*10

Providing of Logistics for Kavach MOD II as per Scope of Work

Providing of Logistics for Kavach MOD II as per Scope of Work

PLASTIC SLIDE FASTNERS LSD OG 18 CM 20 CM AND 22 CM

IS:14181 PART (1 TO 3) :2002

FABRICATION OF SHIRT MAN’S ANGOLA DRAB POLYWOOL MODIFIED PATTERN 2012

FABRICATION OF SHIRT MAN’S ANGOLA DRAB POLY WOOL MODIFIED PATTERN 2012. SWO PART II No.60235 SPECIFICATION : 1) DIMENSION : AS PER SPECN NO.IND/TC/4552(L). 2) CERTIFIED SAMPLE : AS PER APPROVED SAMPLE. NOTE: A) CUT COMPONENTS & GARNITURE WILL BE SUPPLIED BY THE FACTORY B) DRAWING & SAMPLE WILL BE PROVIDED AT THE TIME OF FABRICATION, IF REQUIRED.

set of 05 components for HR Bino

set of 05 components for HR Bino

TAPE NYLON 66, 26 MM BS 550 KGF

ADRDE/Specn/2000/54(d)

ADRDE/Specn/2000/54(d)

NETTING POLYESTER ROUND MESH UNDYED 132 CMS.

SPECN.NO. :AS PER FOLLOWING PARTICULARS. a)Width 132 cms., (b)Thickness in mm at 200 gm/sq.cm 0.45, (c)Weight/mt/Sq (in Gms) 107 Max.,(d) No. of mesh/Sq.inch- 140 ,(e) Tearing strength in kg.in both direction 3.2 min.(f)Bursting strength in kg. 11 kg. min, (g) B.S.in kg 5X20 cms strip length direction 40 min, width direction 24 min. (h)Elongation at break length direction : 40% width direction : 92.5 to 100%

PROTECTIVE GLASS FOR PZU-7 (LF-2612817444)

AS PER DRAWING NO. U7197488

PROTECTIVE GLASS (LF-2612817442)

AS PER DRAWING NO. U7168653

silver nitrate LF 1001713302

SILVER NITRATE AR GRADE 99.9%

• optical coating material

• optical coating material

CORDAGE NYLON BRAIED 250 KG OLIVE DRAB SHADE NO. 298, AS PER IS:SPECN NO. IS:5-1994.

SPECIFICATION NO. JSS:4020-8 ROLL LENGTH 285 MTR. EX-SAMPLING

TAPE NYLON 66,26 MM TUBULAR BS 1850 KGF.

ADRDE/Specn/2000/54(e)

• As Per Specification/Drawing

• As Per Specification/Drawing

CORD. NYLON 1785 N B.L. WHITE

SPECN NO:JSS:4020-9-2013, ( Required Roll Length 337 M excluding test sample ) Except that:- in appearance and all other respects not defined in this specn, the material shall conform to the sealed sample held in the costody the controller, CQAT&C, KANPUR (iii)Packing and marking Sampling Plan & Criteria of conformity As per relevant clause of specn. (iv)Pre inspection, warranty and Advance sample Clause as per specification.

• As Per Specification/Drawing

• As Per Specification/Drawing

SLIDING BAR BUCKLE (DS CAT NO. 1670-000123)

DRAWING NO. : JSS 1670-05 : 2013

• As Per Specification/Drawing

• As Per Specification/Drawing

A4/5340-006721 BUCKLE WAIST ADJUSTABLE ADOPTER (SLIDING BAR TYPE) PTRM

SPECN.NO.IND/GS/1802

IND/GS/1802

FABRIC COTTON C/W 310 GM O.G. 91.4 CMS.

JSS: 8305-05

TESCO SF30 SIZE-30X17X6.5,SIMRIT.

TESCO SF30 SIZE-30X17X6.5,SIMRIT.

CASTING DRG.NO.2024620-2.

CASTING DRG.NO.2024620-2.

Cylinder Gas (Exdptl) DRG No. ARDE/SK/108/010 for LMG 7.62 MM Belt Fed

Cylinder Gas (Exdptl) DRG No. ARDE/SK/108/010 for LMG 7.62 MM Belt Fed

ARDE/SK/108/010

STUD M 14X 1.5, PART NO. X3711915 A

STUD M 14X 1.5, PART NO. X3711915 A

X3711915 A

PLATE (BKT ON CROSS FT. MEMBER PLATE)

PLATE (BKT ON CROSS FT. MEMBER PLATE)

X-3004310 -VI

As per specification/Drawings

As per specification/Drawings

As per Specification/Drg.

As per Specification/Drg.

As per specification / Drawings

As per specification / Drawings

As per specification / Drawings

As per specification / Drawings

REAR SEAT ASSY DRG. NO. 485-03-1030 A

REAR SEAT ASSY DRG. NO. 485-03-1030 A

485-03-1030 A

STEERING PIPE PRESS.LINE BS3 STEERING PIPE PRESSURE LINE B2238213(B0)BS-III STALLION VEH.

STEERING PIPE PRESS.LINE BS3 STEERING PIPE PRESSURE LINE B2238213(B0)BS-III STALLION VEH.

B2238213

• As per Drawing

• As per Drawing

STEERING PIPE RETURN LINE, BS3 STEERING PIPE RETURN LINE, BS-III STALLION VEHICLE, PART NO. B2238212(B.1)

STEERING PIPE RETURN LINE, BS3 STEERING PIPE RETURN LINE, BS-III STALLION VEHICLE, PART NO. B2238212(B.1)

B2238212

• As per Specification

• As per Specification

STEERING PIPE RETURN LINE BS3 STEERING PIPE RETURN LINE B2238211(B.1)BSIII STALLION VEH.

STEERING PIPE RETURN LINE BS3 STEERING PIPE RETURN LINE B2238211(B.1)BSIII STALLION VEH.

B2238211

• As per Specification

• As per Specification

STEERING PIPE RETURN LINE,BS3 STEERING PIPE RETURN LINE PART NO.B 2238210-B2,BS-III STALLI ON VEHICLE.

STEERING PIPE RETURN LINE,BS3 STEERING PIPE RETURN LINE PART NO.B 2238210-B2,BS-III STALLI ON VEHICLE.

B2238210

• As per Specification

• As per Specification

PROPELLER SHAFT ASSY A2196700 PROPELLER SHAFT ASSY A2196700, ONE SET CONSISTING OF:- 1. DRIVE SHAFT TO PART NO. X7412700 V1 01NO.& 2. PROPELLER SHAFT TO PART NO. X7412800- (V1)02N0FOR MK-IV, BS-III VEHICLE.

PROPELLER SHAFT ASSY A2196700 PROPELLER SHAFT ASSY A2196700, ONE SET CONSISTING OF:- 1. DRIVE SHAFT TO PART NO. X7412700 V1 01NO.& 2. PROPELLER SHAFT TO PART NO. X7412800- (V1)02N0FOR MK-IV, BS-III VEHICLE.

X7412700-V1

VFJ BADGE FOR CABIN (IN HINDI) VFJ BADGE FOR CABIN (IN HINDI) FOR STALLION MK-III VEH. DRG.NO. VFJ/17/09/00051-V1

VFJ BADGE FOR CABIN (IN HINDI) VFJ BADGE FOR CABIN (IN HINDI) FOR STALLION MK-III VEH. DRG.NO. VFJ/17/09/00051-V1

VFJ/17/09/00051-V1

VFJ LOGO FOR CABIN STALLION VFJ LOGO FOR CABIN STALLION. DRG.NO.VFJ/17/09/00038 (V3)

VFJ LOGO FOR CABIN STALLION VFJ LOGO FOR CABIN STALLION. DRG.NO.VFJ/17/09/00038 (V3)

VFJ/17/09/00038 (V3)

• As per TE

• As per TE

WHEEL SCOTCHE WHEEL SCOTCHE DRG./PART NO.X-4700314-B

WHEEL SCOTCHE WHEEL SCOTCHE DRG./PART NO.X-4700314-B

X-4700314-B

NIV-FABRIC 410 G OG WPPV DOPE DYED RIP STOP 148 CM. PROV

SPECN.NO.IND/TC/2562

• As Per Specification/Drawing

• As Per Specification/Drawing

TUBE EXTENSION TUBE EXTENSION-II DRG./PART NO.X-1915215-A

TUBE EXTENSION TUBE EXTENSION-II DRG./PART NO.X-1915215-A

S/A OF PIPE (AD) S/A OF PIPE (AD)PT.NO.B4386019-ND

S/A OF PIPE (AD) S/A OF PIPE (AD)PT.NO.B4386019-ND

B4386019-ND

S/A OF PIPE (AD) S/A OF PIPE (AD)PT.NO.B4386020-ND

S/A OF PIPE (AD) S/A OF PIPE (AD)PT.NO.B4386020-ND

B4386020-ND

RADIATOR & CAC ASSY.WITH SHROD RADIATOR AND CAC ASSY.WITH SHROUD PT.NO.B1211802 ISSUE HASH.1

RADIATOR & CAC ASSY.WITH SHROD RADIATOR AND CAC ASSY.WITH SHROUD PT.NO.B1211802 ISSUE HASH.1

B1211802

PIPE CLIP DRG./PART NO.X-0840110 V1

PIPE CLIP DRG./PART NO.X-0840110 V1

DRG./PART NO.X-0840110 V1

PIPECLIP ASSY.EXH.PIPING PIPE CLIP DRG./PART NO.X-0840210 V1

PIPECLIP ASSY.EXH.PIPING PIPE CLIP DRG./PART NO.X-0840210 V1

X-0840210 V1

REDUCTION WINCH-SWC REDUCTION WINCH-(SPARE WHEEL CARRIER) PART NO.X3917700

REDUCTION WINCH-SWC REDUCTION WINCH-(SPARE WHEEL CARRIER) PART NO.X3917700

X3917700

OIL CAN OIL CAN DRG./PART NO.F-4730500-V1

OIL CAN OIL CAN DRG./PART NO.F-4730500-V1

F-4730500-V1

MODULAR HOSE KIT MODULAR HOSE KIT PT.NO. B0F04601 HASE.3

MODULAR HOSE KIT MODULAR HOSE KIT PT.NO. B0F04601 HASE.3

B0F04601

• as per drawing

• as per drawing

LOOSE HOSE KIT LOOSE HOSE KIT PT.NO.B0F04602 A.0

LOOSE HOSE KIT LOOSE HOSE KIT PT.NO.B0F04602 A.0

B0F04602 A.0

KIT AIR INTAKE SYSTEM KIT AIR INTAKE SYSTEM PT.NO.B0E24801-HASE N/A

KIT AIR INTAKE SYSTEM KIT AIR INTAKE SYSTEM PT.NO.B0E24801-HASE N/A

B0E02601

KEY RING WITH PLATE KEY RING WITH PLATE DRG.NO.VFJ/16/09/00001(V1)

KEY RING WITH PLATE KEY RING WITH PLATE DRG.NO.VFJ/16/09/00001(V1)

VFJ/16/09/00001(V1)

DEAERATION TANK DEAERATION TANK PART NO. X-1006700 V1 FOR RADIATOR

DEAERATION TANK DEAERATION TANK PART NO. X-1006700 V1 FOR RADIATOR

X-1006700 V1

INSPECTION LAMP INSPECTION LAMP PT.NO.F9E03900-A

INSPECTION LAMP INSPECTION LAMP PT.NO.F9E03900-A

F9E03900

HOSE FOR POWER STEERING HOSE FOR POWER STEERING PT.NO.F8823900-A.

HOSE FOR POWER STEERING HOSE FOR POWER STEERING PT.NO.F8823900-A.

F8823900-A

HOSE FOR POWER STEERING HOSE FOR POWER STEERING PT.NO.F7884100 (I)

HOSE FOR POWER STEERING HOSE FOR POWER STEERING PT.NO.F7884100 (I)

F7884100 (I)

EXHAUST PIPE CLAMP 3" EXHAUST PIPE CLAMP 3" DRG./PART NO.X-0800310

EXHAUST PIPE CLAMP 3" EXHAUST PIPE CLAMP 3" DRG./PART NO.X-0800310

X-0800310

DRAG LINK DRAG LINK PT.NO.X3219915 ISSUE B

DRAG LINK DRAG LINK PT.NO.X3219915 ISSUE B

X3219915

• As per Drawing

• As per Drawing

DISC WHEEL 9.0 X 20 STLN MK-IV, VEHICLE PT. NO. X3801314-A

DISC WHEEL 9.0 X 20 STLN MK-IV, VEHICLE PT. NO. X3801314-A

X3801314-A

• As per drawing

• As per drawing

COMPRESSOR OUTLET PIPE COMPRESSOR OUTLET ON ENG. 1ST PIPE P. NO. B8342905-A.

COMPRESSOR OUTLET PIPE COMPRESSOR OUTLET ON ENG. 1ST PIPE P. NO. B8342905-A.

B8342905

COMPRESSOR INLET PIPE COMPRESSOR INLET PIPE PT.NO.B8342904-A. COMP INLET ON ENGINE

COMPRESSOR INLET PIPE COMPRESSOR INLET PIPE PT.NO.B8342904-A. COMP INLET ON ENGINE

B8342904

CLAMP RADIATOR CLAMP RADIATOR PIPE DRG./PART NO.X-0896010-A

CLAMP RADIATOR CLAMP RADIATOR PIPE DRG./PART NO.X-0896010-A

X-0896010-A

CAB TILT PUMP CAB TILT PUMP PT.NO.F8264800-A.1.

CAB TILT PUMP CAB TILT PUMP PT.NO.F8264800-A.1.

F8264800-A.1

• As per drawing

• As per drawing

CAB TILT CYLINDER CAB TILT CYLINDER PT.NO.F8264700-D.

CAB TILT CYLINDER CAB TILT CYLINDER PT.NO.F8264700-D.

F8264700-D

• As per drawing

• As per drawing

Black Out Stop Lamp Part No/Drg. No. F2341400B

Black Out Stop Lamp Part No/Drg. No. F2341400B

Black Out Head Lamp Part No. F2341000 B

Black Out Head Lamp Part No. F2341000 B

SPARE WHEEL CARRIER ASSY. W/O SPARE WHEEL CARRIER ASSY. PART NO. A0909100 WITHOUT REDUCTION GEAR BOX TO (PART NO. X3917700 CONSISTING OF 60 ITEM AS PER LIST ENCLOSED. N/A

SPARE WHEEL CARRIER ASSY. W/O SPARE WHEEL CARRIER ASSY. PART NO. A0909100 WITHOUT REDUCTION GEAR BOX TO (PART NO. X3917700 CONSISTING OF 60 ITEM AS PER LIST ENCLOSED. N/A

A0909100

• As per TE

• As per TE

WEBBING NYLON BLUE OF SIZES – 48 MM, 38MM & 25MM

WEBBING NYLON BLUE OF SIZES (FOR COMBINATION HARNESS-CHEST& SIT) ONE SET CONSISTING OF (1) WEBBING NYLON THICK 48MM WIDE BLUE - 7.00 MTR (2) WEBBING NYLON THIN 38MM WIDE BLUE - 4.70 MTR (3) WEBBING NYLON THIN 25MM WIDE BLUE - 1.15 MTR DMSRDE/T&GS/93/411(b) AND IN APPEARANCE, SHADE, FINISH ANDDM IN OTHER RESPECTS NOT DEFINED IN SPECIFICATION, THE MATERIAL SHALL CONFORM TO THE CORRESPONDING SEALED PATTERN HELD IN CUSTODY OF THE CONTROLLER, CQA(T&C), KANPUR 1.EACH WEBBING TO BE SUPPLIED IN ROLL FORM i.e.MULTIPLE OF SCALE X SET+5MTR FOR TESTING 2. MIN. ROLL LENGTH IS 100MTR FOR EACH WEBBING ) 3. ALL THE THREE WEBBING SHOULD BE OF SAME SHADE.

• As Per Specification/Drawing

• As Per Specification/Drawing

ADAPTOR (102-18) ADAPTOR DRG./PART NO. X 0122615 A

ADAPTOR (102-18) ADAPTOR DRG./PART NO. X 0122615 A

F0122615

ADAPTOR ADAPTOR DRG.NO. F7885300-H PART NO. F 7885500-H.

ADAPTOR ADAPTOR DRG.NO. F7885300-H PART NO. F 7885500-H.

F7885500

ADAPTOR ADAPTOR PART NO. X 0117615 HASH

ADAPTOR ADAPTOR PART NO. X 0117615 HASH

X0117615

ADAPTOR ADAPTOR PART NO. X 0117615 HASH

ADAPTOR ADAPTOR PART NO. X 0117615 HASH

X0117615

VEHICLE LOG BOOK SIZE 135MM X 200MM (75 GSM THICK) WITH 100 PAGES ON THE BOTH THE SIDE PRINTED (BLACK & WHITE) WITH HARD COVER (LAMINATED).

VEHICLE LOG BOOK SIZE 135MM X 200MM (75 GSM THICK) WITH 100 PAGES ON THE BOTH THE SIDE PRINTED (BLACK & WHITE) WITH HARD COVER (LAMINATED).

As per specification

USER'S HAND BOOK FOR STALLION USER'S HAND BOOK FOR STALLION 4X4 MK-IV(BS-III) H-SERIES ENG INE WITH INLINE FIP IN ENGLISH AS PER VFJ SPECN NO.VFJ SPEC/ 02/STLN/UHB/16/IFIP

USER'S HAND BOOK FOR STALLION USER'S HAND BOOK FOR STALLION 4X4 MK-IV(BS-III) H-SERIES ENG INE WITH INLINE FIP IN ENGLISH AS PER VFJ SPECN NO.VFJ SPEC/ 02/STLN/UHB/16/IFIP

AS PER VFJ SPECN NO.VFJ SPEC/ 02/STLN/UHB/16/IFIP

LEVER TYPE GREASE GUN (500 CC) DRG./PART NO.F-4735900 A

LEVER TYPE GREASE GUN (500 CC) DRG./PART NO.F-4735900 A

F-4735900 A

CROME PLATED SCREW DRIVER PHILIPS 100LG 6 DIA TIP NO-2 EVEREST/TAAPARIA/GEDORE/AMBIKA TOOLS/VENUS/JHALANI/JK/BETA/ JHALANI EXPERT MAKE MADE OF CROME VANADIUM STEEL.

CROME PLATED SCREW DRIVER PHILIPS 100LG 6 DIA TIP NO-2 EVEREST/TAAPARIA/GEDORE/AMBIKA TOOLS/VENUS/JHALANI/JK/BETA/ JHALANI EXPERT MAKE MADE OF CROME VANADIUM STEEL.

X4703311

CROME PLATED SCREW DRIVER 12"(300 mm)X2.0mm X13 mm EVEREST/T AAPARIA/ GEDORE/ JHALANI/ JK/ BETA/AMBIKA TOOLS/JHALANI EXPE RT/VENUS MAKE AS PER IS:844 (PART-II) MADE OF CHROME VANADIUM STEEL.

CROME PLATED SCREW DRIVER 12"(300 mm)X2.0mm X13 mm EVEREST/T AAPARIA/ GEDORE/ JHALANI/ JK/ BETA/AMBIKA TOOLS/JHALANI EXPE RT/VENUS MAKE AS PER IS:844 (PART-II) MADE OF CHROME VANADIUM STEEL.

F-4701211

CROME PLATED SCREW DRIVER 8"(200mm 1.6X10 mm) EVEREST/TAAPAR IA/AMBIKA TOOLS/GEDORE/JHALANI/JK/JHALANI EXPERT/BETA/VENUS MAKE AS PER IS:844 (PART-II)MADE OF CHROME VANADIUM STEEL.

CROME PLATED SCREW DRIVER 8"(200mm 1.6X10 mm) EVEREST/TAAPAR IA/AMBIKA TOOLS/GEDORE/JHALANI/JK/JHALANI EXPERT/BETA/VENUS MAKE AS PER IS:844 (PART-II)MADE OF CHROME VANADIUM STEEL.

F4735000

CROME PLATED/BLACK FINISH HEXAGON SOCKET SCREW KEY 10 MM EVEREST/TAAPARIA/AMBIKA TOOLS/GEDORE/JHALANI/JHALANI EXPERT/ VENUS/ JK/BETA MAKE AS PER IS:3082 MADE OF CROME VANADIUM STEEL.

CROME PLATED/BLACK FINISH HEXAGON SOCKET SCREW KEY 10 MM EVEREST/TAAPARIA/AMBIKA TOOLS/GEDORE/JHALANI/JHALANI EXPERT/ VENUS/ JK/BETA MAKE AS PER IS:3082 MADE OF CROME VANADIUM STEEL.

X-4701511

CROME PLAED/BLACK FINISH HEXAGON SOCKET SCREW KEY 6 MM EVERE ST/TAAPARIA/GEDORE/AMBIKA TOOLS/VENUS /JHALANI/JHALANI EXPER /JK/ BETA MAME ASPER IS:3082 MADE OF CROME VANADIUM STEEL.

CROME PLAED/BLACK FINISH HEXAGON SOCKET SCREW KEY 6 MM EVERE ST/TAAPARIA/GEDORE/AMBIKA TOOLS/VENUS /JHALANI/JHALANI EXPER /JK/ BETA MAME ASPER IS:3082 MADE OF CROME VANADIUM STEEL.

X-4703211

CROME PLATED/BLACK FINISH HEXAGON SOCKET SCREW KEY 12MM EVER EST /TAAPARIA/AMBIKA TOOLS/GEDORE/JHALANI/JHALANI EXPERT/JK/ BETA/VENUS/ MAKE AS PER IS:3082-MADE OF CHROME VANADIUM STEEL. PART NO. X4700711-V2.

CROME PLATED/BLACK FINISH HEXAGON SOCKET SCREW KEY 12MM EVER EST /TAAPARIA/AMBIKA TOOLS/GEDORE/JHALANI/JHALANI EXPERT/JK/ BETA/VENUS/ MAKE AS PER IS:3082-MADE OF CHROME VANADIUM STEEL. PART NO. X4700711-V2.

X4700711-V2