TUBE EXPLODER REAR TO DRG.NO. ARM- 1172 B-23.

TUBE EXPLODER REAR TO DRG.NO. ARM- 1172 B-23.

DRG.NO. ARM- 1172 B-23.

• SPIRAL WINDING MACHINE WITH SUITABLE MANDREL & GLUE BATH TUBE CUTTING MACHINE PRESS MACHINE VARNISHING FACILITY

• VERNIER CALLIPER HEIGHT GAUGE SUITABLE GAUGE FOR CHECKING TAPER/ CHAMBER TEST REQUIREMENT AS PER SPECIFICATION NO.ARM 107 FOR TUBE, EXPLODERS,AIR CRAFT BOMB

TUBE EXPLODER NOSE TO DRG.NO. ARM- 1172 B-22 Dt.24-11-79.

TUBE EXPLODER NOSE TO DRG.NO. ARM- 1172 B-22 Dt.24-11-79.

DRG.NO. ARM- 1172 B-22 Dt.24-11-7

• SPIRAL WINDING MACHINE WITH SUITABLE MANDREL & GLUE BATH TUBE CUTTING MACHINE PRESS MACHINE VARNISHING FACILITY

• VERNIER CALLIPER HEIGHT GAUGE SUITABLE GAUGE FOR CHECKING TAPER/ CHAMBER TEST REQUIREMENT AS PER SPECIFICATION NO.ARM 107 FOR TUBE, EXPLODERS,AIR CRAFT BOMB

RAW MATERIAL OF BARREL ST. ROD 40.0 MM DIA TO SPEC. JSS:9510-06-2012 CODE REF .B. T - I COND. WITH COMPOSITION N RESTRICTION S%=0.01 MAX., P%=0.015MAX & (S+P)%=0.022MAX. ANNEXURE NO. 7158/DDO/LMG 5.56MM BARREL FOR TESTING PARA ENCLOSED., QUALITY AOD/VOD.

SPEC. JSS:9510 -06-2012 CODE REF .B. T - I COND.

• Melting & Rolling

• as per attached document

STEEL FORGED TRIGGER TO DRG NO.SK-5294*D.A. 11/2020.

STEEL FORGED TRIGGER TO DRG NO.SK-5294*D.A. 11/2020.

• Machining & Assy.

• As per attached manufacturing testing document

SHAFT TO DRG NO. 166.29.305CB

SHAFT TO DRG NO. 166.29.305CB

166.29.305CB

• ATTACHED

• ATTACHED

LEVER CHANGE THROUGH MIM ROUTE TO DS.CAT.NO. 1005-007811 DC(I) NO.26921-SA, DT-26.08.2016

LEVER CHANGE THROUGH MIM ROUTE TO DS.CAT.NO. 1005-007811 DC(I) NO.26921-SA, DT-26.08.2016

• As per drawing

• As per drawing

6510120004 CAP KG-4 FOR A30-T DETONATOR TO DRG FOR PRIMER DETONATOR A-30-T,NO.CQA(A)/AMN/2857, DC NO 37271-A DT 08.11.10

CAP KG-4 FOR A30-T DETONATOR TO DRG FOR PRIMER DETONATOR A-30-T,NO.CQA(A)/AMN/2857, DC NO 37271-A DT 08.11.10

• suitable press machine suitable chemical passivation followed by shellac application facility or MOU/Tie up with other firm doing the sasme

• radius gauge vernier caliper thickness gauge

CUP YA-5 FOR A30-T (DET) TO DRG.NO. FOR PRIMER A-30-T CQA(A)/AMN/2856DCNO.37271-A,DT.08.11.10 SCANNED ON DT.05.01.2011.

CUP YA-5 FOR A30-T (DET) TO DRG.NO. FOR PRIMER A-30-T CQA(A)/AMN/2856DCNO.37271-A,DT.08.11.10 SCANNED ON DT.05.01.2011.

FOR PRIMER A-30-T CQA(A)/AMN/2856DCNO.37271-A,DT.08.11.10 SCANNED ON DT.05.01.2011.

• suitable press machine

• radius gauge verier calliper thickness gauge

BUBBLE SPIRIT GLASS

BUBBLE SPIRIT GLASS, DRG NO. OPT/MISC/360

DRG NO. OPT/MISC/360

• FIRM NEEDS TO UPLOAD THEIR MANUFACTURING DETAILS FOR THE PRODUCTION OF THE SUBJECT ITEM

• FIRM NEEDS TO UPLOAD THEIR MANUFACTURING DETAILS FOR THE PRODUCTION OF THE SUBJECT ITEM

PUTTY 220T

AS PER SPECIFICATION NO. OST3-5605-91

• FIRM NEEDS TO UPLOAD THEIR MANUFACTURING FACILITIES DETAILS FOR THE PRODUCTION OF SUBJECT ITEM

• FIRM NEEDS TO UPLOAD THEIR TESTING /INSPECTION FACILITIES DETAILS FOR THE PRODUCTION OF SUBJECT ITEM

SILICON PUTTY USED FOR SEALING OF DEVICES 3145 RTV , MAKE-DOW CORNING AS PER MIL-A-46146. ONE UNIT CONSIST OF 90 ML TUBE

SILICON PUTTY USED FOR SEALING OF DEVICES 3145 RTV , MAKE-DOW CORNING AS PER MIL-A-46146. ONE UNIT CONSIST OF 90 ML TUBE

SPECIFICATION NO. MIL-A-46146.

• FIRM NEEDS TO UPLOAD THEIR MANUFACTURING FACILITY DETAILS FOR THE MANUFACTURING OF SUBJECT ITEMS

• FIRM NEEDS TO UPLOAD THEIR TESTING/INSPECTION FACILITY DETAILS FOR THE MANUFACTURING OF SUBJECT ITEMS

MOULD OF GERMANIUM WINDOW TO DRAWING NO. OPT/MISC/476 M1 ALL CHARACTERISTICS AS PER DRAWING NO. OPT/MISC476M1

MOULD OF GERMANIUM WINDOW TO DRAWING NO. OPT/MISC/476 M1 ALL CHARACTERISTICS AS PER DRAWING NO. OPT/MISC476M1

OPT/MISC476M1

• FIRM NEEDS TO UPLOAD THE DETAILS OF MANUFACTURING FACILITIES FOR THE PRODUCTION OF SUBJECT ITEMS

• FIRM NEEDS TO UPLOAD THE DETAILS OF TESTING/INSPECTION FACILITIES FOR THE PRODUCTION OF SUBJECT ITEMS

WASHER RETAINER TO CQA(A) DRG. NO. 11618-0-0 (AS PER DC NO. 36804-A DATED 01/01/2002

WASHER RETAINER TO CQA(A) DRG. NO. 11618-0-0 (AS PER DC NO. 36804-A DATED 01/01/2002

• as per attachment

• as per attachment

CUSHION DETONATOR TO CQA(A) DRG. NO. 13152-0-0 (AS PER DC NO. 37554-A DATED 25-07-2020

CUSHION DETONATOR TO CQA(A) DRG. NO. 13152-0-0 (AS PER DC NO. 37554-A DATED 25-07-2020

• as per attachment

• as per attachment

LOCK, CENTRIFUGAL PLUNGER PIN TO CQA(A) DRG. NO. 13134-0-0 (AS PER DC NO. 36804-A DATED 01/01/2002

LOCK, CENTRIFUGAL PLUNGER PIN TO CQA(A) DRG. NO. 13134-0-0 (AS PER DC NO. 36804-A DATED 01/01/2002

• as per attachment

• as per attachment

ELECTRONIC POWER PLANT BATTERY CHARGER TO DRG.NO.1149052D TO DOC.NO:GCF/50/40782.

ELECTRONIC POWER PLANT BATTERY CHARGER TO DRG.NO.1149052D TO DOC.NO:GCF/50/40782.

• As per tender document Annexure L

• As per tender document Annexure L

INNER TUBE PNEUMATIC TYRE 8.25X19 WITH VALVE DETAIL TR-14 STRAIGHT TYPE CORE TR CI

AS PER REQUIRED/ SPECIFICATION

• inner tube kneumatic

• inner tube kneumatic

SQUIB EMPTY: ERDL DRG.971,DET NO.05 DT:101088

SQUIB EMPTY: ERDL DRG.971,DET NO.05 DT:101088

ERDL DRG.971,DET NO.05 DT:101088

• PRESS MACHINE, SURFACE TREATMENT FACILITY(TIN PLATING) OR MOU/TIE-UP WITH SPECIFIED AGENCY FOR SAME, SOLDERING FACILITY, DRYING FACILITY FOR DRYING AT 90-95 DEG. CENT.

• VERNIER CALLIPER, OHM METER

Elastic Black 3cm Wide Best trade quality as per provisional specification no.-S/2594/CCD army logo/TC-15(a)

Best trade quality as per provisional specification no.-S/2594/CCD army logo/TC-15(a)

• as per attached list (Manufacturing Technology Files )

• as per attached list (Testing / Inspection Facility Files )

BEVEL GEAR DRIVING AND BEVEL GEAR DRIVEN MATCHED SET TO DRG NO. CQA(HV)0000.000.001

BEVEL GEAR DRIVING AND BEVEL GEAR DRIVEN MATCHED SET TO DRG NO. CQA(HV)0000.000.001

CQA(HV)0000.000.001

• VQC ATTACHED

• VQC ATTACHED

ROTOR LF 7440206893

ROTOR LF 7440206893

AL7.774.024

• MECHANICAL COMPONENT

• MECHANICAL COMPONENT

VALVE THREE WAY TO DRG NO IAN 301SA

VALVE THREE WAY TO DRG NO IAN 301SA

• VALVE THREE WAY TO DRG NO IAN 301SA

• VALVE THREE WAY TO DRG NO IAN 301SA

BEARING SLEEVE DRG NO 3120 004647

BEARING SLEEVE DRG NO 3120 004647

• BEARING SLEEVE DRG NO 3120 004647

• BEARING SLEEVE DRG NO 3120 004647

ROLLED HOMOGENOUS ARMOUR PLATE (RHA) OF SIZE 1830 X 1830 X 230 MM AS PER DEF STAN 95 13 ISSUE 4

ROLLED HOMOGENOUS ARMOUR PLATE (RHA) OF SIZE 1830 X 1830 X 230 MM AS PER DEF STAN 95 13 ISSUE 4

ROLLED HOMOGENOUS ARMOUR PLATE (RHA) OF SIZE 1830 X 1830 X 230 MM AS PER DEF STAN 95 13 ISSUE 4

• 1. FURNANCE 2. CONTINUOUS CASTING/INGOT CASTING 3. FORGING & SLABBING MILL 4. DESCALER 5. ROUGHING/FINISHING MILL 6. HOT & COLD LEVELLING 7. SHEARING MACHING 8. SHOT BLASTING MACHINE 9. CONDITIONING CHAMBER

• 1. ULTRASONIC TESTING 2. MECHANICAL, CHEMICAL & MICROSTRUCTURAL TESTING AT NABL LABORATORY. 3. GENERAL PURPOSE ENGINEERING EQUIPMENTS FOR MEASURING DIMENSIONS LIKE VERNIER CALLIPER/MICROMETER/DIAL INDICATOR ETC. 4. PHOSPATING TEST 5. INCASE OF SOLE SELLING AGENT/DEALERS/STOCKIEST FIRM NEED NOT SUBMIT MANUFACTURING TECHNOLOGY/INSPECTION TECHNOLOGY BUT SHOULD HAVE OEM CERTIFICATE FOR THIS ITEM.

SHAPED CHARGE 90 MM (E.ASSY) CONSISTING OF 2 COMPONENTS TODRG. NO. HE/CAST 018 DET 2 & DET 4 & QAP NO. HEMRL/HE/ADD/08/01 REV.00 OF 09/2008

SHAPED CHARGE 90 MM (E.ASSY) CONSISTING OF 2 COMPONENTS TODRG. NO. HE/CAST 018 DET 2 & DET 4 & QAP NO. HEMRL/HE/ADD/08/01 REV.00 OF 09/2008

SHAPED CHARGE 90 MM (E.ASSY) CONSISTING OF 2 COMPONENTS TODRG. NO. HE/CAST 018 DET 2 & DET 4 & QAP NO. HEMRL/HE/ADD/08/01 REV.00 OF 09/2008

• 1. INJECTION MOULDING 2. GRINDING.

• 1. THREAD GAUGE. 2. GENERAL PURPOSE ENGINEERING EQUIPMENT'S TO MEASURE DIMENSIONS LIKE MICROMETRE, VERNIER CALIPER, HEIGHT GAUGE.

SADDLE ASSLY TO DRG.NO.HE/CAST 021 DET 1 CONSISTING OF 4COMPONENTS TO DRG. NO. HE/CAST 021 DET 2 TO 4 & ALLEN SCREWS M5 X 5 & QAP NO. HEMRL/HE/ADD/08/01 REV.00 OF 09/2008.

SADDLE ASSLY TO DRG.NO.HE/CAST 021 DET 1 CONSISTING OF 4COMPONENTS TO DRG. NO. HE/CAST 021 DET 2 TO 4 & ALLEN SCREWS M5 X 5 & QAP NO. HEMRL/HE/ADD/08/01 REV.00 OF 09/2008.

SADDLE ASSLY TO DRG.NO.HE/CAST 021 DET 1 CONSISTING OF 4COMPONENTS TO DRG. NO. HE/CAST 021 DET 2 TO 4 & ALLEN SCREWS M5 X 5 & QAP NO. HEMRL/HE/ADD/08/01 REV.00 OF 09/2008.

• 1. CASTING 2. DRILLING, GRINDING 3. CNC MACHINE 4. RUBBER MOULDING/COMPRESSION MACHINE

• 1. GENERAL PURPOSE ENGINEERING EQUIPMENT'S TO MEASURE DIMENSIONS LIKE MICROMETRE, VERNIER CALIPER, HEIGHT GAUGE.

DETONATOR HOLDER FOR SHAPED CHARGE 90 MM TO DRG. NO. HE/CAST/018 DET. 5 & QAP NO. HEMRL/HE/ADD/08/01 REV. 00 OF 09/2008.

DETONATOR HOLDER FOR SHAPED CHARGE 90 MM TO DRG. NO. HE/CAST/018 DET. 5 & QAP NO. HEMRL/HE/ADD/08/01 REV. 00 OF 09/2008.

DETONATOR HOLDER FOR SHAPED CHARGE 90 MM TO DRG. NO. HE/CAST/018 DET. 5 & QAP NO. HEMRL/HE/ADD/08/01 REV. 00 OF 09/2008.

• 1. RUBBER MOULDING/COMPRESSION MACHINE

• 1. GENERAL PURPOSE ENGINEERING EQUIPMENT'S TO MEASURE DIMENSIONS LIKE MICROMETRE, VERNIER CALIPER, HEIGHT GAUGE.

LINER FOR SHAPED CHARGE 90 MM TO DRG. NO. HE/CAST/018 DET 3& QAP NO. HEMRL/HE/ADD/08/01 REV. 00 OF 09/2008.

LINER FOR SHAPED CHARGE 90 MM TO DRG. NO. HE/CAST/018 DET 3& QAP NO. HEMRL/HE/ADD/08/01 REV. 00 OF 09/2008.

LINER FOR SHAPED CHARGE 90 MM TO DRG. NO. HE/CAST/018 DET 3& QAP NO. HEMRL/HE/ADD/08/01 REV. 00 OF 09/2008.

• 1. FLOW FORMING 2. HEAT TREATMENT

• 1. HARDNESS TESTER. 2. GENERAL PURPOSE ENGINEERING EQUIPMENT'S TO MEASURE DIMENSIONS LIKE MICROMETRE, VERNIER CALIPER, HEIGHT GAUGE, BEVEL PROTECTOR.

LLDPE PACKAGE BOX FOR INFLUENCE MINE MK-II (EMPTY ASSEMBLY)TO ARDE DRG. NO. 9707 00 04 00 00 000 00TA AS PER QAP NO.NFM/IMMK-II/PKG/02

LLDPE PACKAGE BOX FOR INFLUENCE MINE MK-II (EMPTY ASSEMBLY)TO ARDE DRG. NO. 9707 00 04 00 00 000 00TA AS PER QAP NO.NFM/IMMK-II/PKG/02

LLDPE PACKAGE BOX FOR INFLUENCE MINE MK-II (EMPTY ASSEMBLY)TO ARDE DRG. NO. 9707 00 04 00 00 000 00TA AS PER QAP NO.NFM/IMMK-II/PKG/02

• 1. ROTO MOULDING 2. GRINDING 3. BRAZING 4. CUTTING/SIZING

• FOLLOWING TEST AS PER SPECIFICATION - 1. RUST PROOF TEST 2. WATER IMMERSION TEST 3. BUMP TEST 4. CONDITIONING CHAMBER 5. STAKING TEST 6. IMPACT LOAD

ROLLER, LAUNCHING ASSY. TO CAT SECTION & CAT/PART NO.14/5420-000160 & DRG/NO/S-393/68.

ROLLER, LAUNCHING ASSY. TO CAT SECTION & CAT/PART NO.14/5420-000160 & DRG/NO/S-393/68.

DRG/NO/S-393/68.

• as per attachment

• as per attachment

BAYONET MK-I FOR JVPC 5.56X30MM DRG NO. 0204 04 02 00 00 000 00AA

BAYONET MK-I FOR JVPC 5.56X30MM DRG NO. 0204 04 02 00 00 000 00AA

0204 04 02 00 00 000 00AA

• Machining

• 1) Chemical & Mechanical properties as per std. given drawing /Specification. 2) Dimensional inspection for all dimension given in the drawing & other parameter which are mentioned in relevant drawing/specification.

Double Layer Bonded Polyester Fleece white 150cm width Specification- IND/TC/1208. AS PER RELEVANT CLAUSE OF SPECIFICATIONS PER RELEVANT CLAUSE OF SPECIFICATION

Specification- IND/TC/1208. AS PER RELEVANT CLAUSE OF SPECIFICATIONS PER RELEVANT CLAUSE OF SPECIFICATION

• as per attached list (Manufacturing Technology Files )

• as per attached list (Testing / Inspection Facility Files )

SPRING TYPE CYLINDRICAL PLASTIC STOPPER WHITE PROVISIONAL SPECIFICATION NO. OCFS/PLASTIC STOPPER WHITE/NYLON 6 AS PER RELEVANT CLAUSE OF SPECIFICATION- OCF, SHAHJAHANPUR

SPRING TYPE CYLINDRICAL PLASTIC STOPPER WHITE PROVISIONAL SPECIFICATION NO. OCFS/PLASTIC STOPPER WHITE/NYLON 6 AS PER RELEVANT CLAUSE OF SPECIFICATION- OCF, SHAHJAHANPUR

• as per attached list (Manufacturing Technology Files )

• as per attached list (Testing / Inspection Facility Files )

Fabric Suit Winter 150 cm Width Min IAFS 01079:2015

IAFS 01079:2015

• as per attached list (Manufacturing Technology Files )

• as per attached list (Testing / Inspection Facility Files )

PLASTIC SLIDE FASTENERS MEDIUM HEAVY DUTY OG WITH TWO AUTO LOCK SLIDER FACING THE TWO OPEN ENDS 81 CM SPECIFICATION IS:14181()PART 1 TO 3 ): AMDT NO.2,MARCH 2008

SPECIFICATION IS:14181()PART 1 TO 3 ): AMDT NO.2,MARCH 2008

• as per attached list (Manufacturing Technology Files )

• as per attached list (Testing / Inspection Facility Files )

PLASTIC SLIDE FASTENER MEDIUM HEAVY DUTY OG WITH TWO AUTO LOCK SLIDER FACING THE TWO OPEN ENDS 76 CMS SPECIFICATION : IS:14181(PART 1 TO 3):AMDT NO.2, MARCH 2008

SPECIFICATION : IS:14181(PART 1 TO 3):AMDT NO.2, MARCH 2008

• as per attached list (Manufacturing Technology Files )

• as per attached list (Testing / Inspection Facility Files )

PLASTIC SLIDE FASTENERS MEDIUM HEAVY DUTY OG WITH TWO AUTO LOCK SLIDER FACING THE TWO OPEN ENDS 73 CM SPECIFICATION : IS:14181(PART 1 TO 3):AMDT.NO.2, MARCH 2008

SPECIFICATION : IS:14181(PART 1 TO 3):AMDT.NO.2, MARCH 2008

• as per attached list (Manufacturing Technology Files )

• as per attached list (Testing / Inspection Facility Files )

PLASTIC SLIDE FASTENER MEDIUM HEAVY DUTY WITH TWO AUTO LOCK SLIDER FACING WITH TWO OPEN ENDS SIZE 78 CM SPECIFICATION: IS:14181(PART 1 TO 3):AMDT NO.2, MARCH 2008

SPECIFICATION: IS:14181(PART 1 TO 3):AMDT NO.2, MARCH 2008

• as per attached list (Manufacturing Technology Files )

• as per attached list (Testing / Inspection Facility Files )

LOADING DEVICE AS PER THE DESCRIPTION AND BILL OF MATERIAL(ENCLOSED) PART NO 1156282.

LOADING DEVICE AS PER THE DESCRIPTION AND BILL OF MATERIAL(ENCLOSED) PART NO 1156282.

1156282

• As per Annexure L

• As per Annexure L

SPRING DRG NO MRS5001104 LF NO 7440206684

SPRING DRG NO MRS5001104 LF NO 7440206684

MRS.50.01.104

• mechanical component

• mechanical component

LEVER LF NO 7440206683

LEVER LF NO 7440206683

MRS5001103

• mechanical component

• mechanical component

HOUSING DRG NO MRS5001102 LF NO 7440206682

HOUSING DRG NO MRS5001102 LF NO 7440206682

MRS.50.01.102

• mechanical component

• mechanical component

PLATE LF NO 7440206681

PLATE LF NO 7440206681

MRS5001101

• mechanical component

• mechanical component

LOCK PIN DRG NO MRS5001029 LF NO 7440206679

LOCK PIN DRG NO MRS5001029 LF NO 7440206679

MRS.50.01.029

• mechanical component

• mechanical component

BRACKET DRG NO MRS5001021 LF NO 7440206678

BRACKET DRG NO MRS5001021 LF NO 7440206678

MRS.50.01.021

• mechanical component

• mechanical component

BRACKET DRG NO MRS5001016 LF N0 7440206677

BRACKET DRG NO MRS5001016 LF N0 7440206677

MRS.50.01.016

• mechanical component

• mechanical component

COVER DRG NO MRS5001014 LF NO 7440206676

COVER DRG NO MRS5001014 LF NO 7440206676

MRS.50.01.014

• mechanical component

• mechanical component

PLATE DRG NO MRS5001002 LF NO 7440206675

PLATE DRG NO MRS5001002 LF NO 7440206675

MRS.50.01.002

• mechanical component

• mechanical component

SPREAD LF NO 7440206674

SPREAD LF NO 7440206674

MRS5000033

• mechanical component

• mechanical component

GASKET DRG NO MRS4100005 LF NO 7440206673

GASKET DRG NO MRS4100005 LF NO 7440206673

MRS.41.00.005

• mechanical component

• mechanical component

PAD DRG NO MRS4000087 02 LF NO 7440206672

PAD DRG NO MRS4000087 02 LF NO 7440206672

MRS.40.00.087-02

• mechanical component

• mechanical component

PAD DRG NO MRS4000087 01 LF NO 7440206671

PAD DRG NO MRS4000087 01 LF NO 7440206671

MRS.40.00.087-01

• mechanical component

• mechanical component

PAD DRG NO MRS4000087 LF NO 7440206670

PAD DRG NO MRS4000087 LF NO 7440206670

MRS.40.00.087

• mechanical component

• mechanical component

PAD DRG NO MRS4000086 02 LF NO 7440206669

PAD DRG NO MRS4000086 02 LF NO 7440206669

MRS.40.00.086-02

• mechanical component

• mechanical component

PAD DRG NO MRS4000086 01 LF NO 7440206668

PAD DRG NO MRS4000086 01 LF NO 7440206668

MRS.40.00.086-01

• mechanical component

• mechanical component

PAD DRG NO MRS4000086 LF NO 7440206667

PAD DRG NO MRS4000086 LF NO 7440206667

MRS.40.00.086

• mechanical component

• mechanical component

BRACE DRG NO MRS4000083 LF NO 7440206666

BRACE DRG NO MRS4000083 LF NO 7440206666`

MRS.40.00.083

• mechanical component

• mechanical component

BACK STOP RH DRG NO MRS4000082 LF NO 7440206665

BACK STOP RH DRG NO MRS4000082 LF NO 7440206665

MRS 40.00.082

• mechanical component

• mechanical component

BACK STOP LH DRG NO MRS4000081 LF NO 7440206664

BACK STOP LH DRG NO MRS4000081 LF NO 7440206664

MRS.40.00.081

• mechanical component

• mechanical component

BUSH DRG NO MRS4000007 LF NO 7440206663

BUSH DRG NO MRS4000007 LF NO 7440206663

MRS.40.00.007

• mechanical component

• mechanical component

PIN 41.7MM DIA X 280MM LONG TO DRG.CAT.NO.1291/B. DC. ES14/244 DT.9.7.86 DULY GALVANISED AND CHROMATISED 14/5314/000641

PIN 41.7MM DIA X 280MM LONG TO DRG.CAT.NO.1291/B. DC. ES14/244 DT.9.7.86 DULY GALVANISED AND CHROMATISED 14/5314/000641

DRG.CAT.NO.1291/B. DC. ES14/244 DT.9.7.86 DULY GALVANISED AND CHROMATISED 14/5314/000641

• AS PER ATTACHMENT

• AS PER ATTACHMENT

SHUTTER HOUSING TO DRG NO 9102 00 03 01 09 001 00DB

AS PER DRG

9102 00 03 01 09 001 00DB

• AS PER ATTACHMENT

• AS PER ATTACHMENT

SHUTTER AS PER DRG NO 9102 00 03 00 01 012 00DA

AS PER DRG

9102 00 03 00 01 012 00DA

• AS PER ATTACHMENT
• AS PER ATTACHMENT

• AS PER ATTACHMENT

ANCHOR STOCK 80 KG TO CAT SECTION & CAT/PART NO.14/2040-000004 AND DRG/CAT NO.ISK-0301

ANCHOR STOCK 80 KG TO CAT SECTION & CAT/PART NO.14/2040-000004 AND DRG/CAT NO.ISK-0301

DRG/CAT NO.ISK-0301

• AS PER ATTACHMENT

• AS PER ATTACHMENT

TRAIL RIGHT WELDING TO DRG NO DS CAT NO 1015 000756 SHT 2

TRAIL RIGHT WELDING TO DRG NO DS CAT NO 1015 000756 SHT 2

• TRAIL RIGHT WELDING TO DRG NO DS CAT NO 1015 000756 SHT 2

• TRAIL RIGHT WELDING TO DRG NO DS CAT NO 1015 000756 SHT 2

DISC WHEEL TO DRG NO 1015 000810

DISC WHEEL TO DRG NO 1015 000810

• DISC WHEEL TO DRG NO 1015 000810

• DISC WHEEL TO DRG NO 1015 000810

CONVERSION OF BOLT BREECH FROM FORGING TO DRG.NO.29P 0013* (M) required for 0.315" Sporting Rifle

AS PER DRG.NO.29P 0013* (M) required for 0.315" Sporting Rifle

29P 0013*(M)

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

PACKING BOX-CPP HOLLOW CORRUGATED BOX (CAPACITY 5 RIFLES) TO DRG. No. RFI SK 6431*3 required for 0.315" Sporting Rifle

AS PER DRG. No. RFI SK 6431*3 required for 0.315" Sporting Rifle

RFI SK 6431*3

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

PACKING BOX-CPP HOLLOW CORRUGATED BOX (CAPACITY 5 RIFLES) TO DRG. No. RFI SK 6431*3 required for 0.315" Sporting Rifle

AS PER DRG. No. RFI SK 6431*3 required for 0.315" Sporting Rifle

RFI SK 6431*3

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

PACKING BOX-CPP HOLLOW CORRUGATED BOX (CAPACITY 10 RIFLES)TO DRG.No.RFI.SK.6430*3 required for 0.315" Sporting Rifle

AS PER DRG.No.RFI.SK.6430*3 required for 0.315" Sporting Rifle

RFI.SK.6430*3

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

PIN STOP BOLT LOCKING TO DRG.NO.: 29P 0048* required for 0.315" Sporting Rifle

DRG.NO.: 29P 0048* required for 0.315" Sporting Rifle

29P 0048*

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

SCREW PLATE BUTT TO DRG.NO. 29P 0059* required for 0.315" Sporting Rifle

AS PER DRG.NO. 29P 0059* required for 0.315" Sporting Rifle

29P 0059*

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

SCREW PLATE BUTT TO DRG.NO. 29P 0059* required for 0.315" Sporting Rifle

AS PER DRG.NO. 29P 0059* required for 0.315" Sporting Rifle

29P 0059*

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

PIN FIXING BAND BACK SIGHT TO DRG.No.: 29P 0006 required for 0.315" Sporting Rifle

AS PER DRG.No.: 29P 0006 required for 0.315" Sporting Rifle

29P 0006

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

CAP SLING TO DRG NO.: 29P 0044* required for 0.315" Sporting Rifle

AS PER DRG NO.: 29P 0044* required for 0.315" Sporting Rifle

29P 0044*

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

CAP SLING TO DRG NO.: 29P 0044* required for 0.315" Sporting Rifle

AS PER DRG NO.: 29P 0044* required for 0.315" Sporting Rifle

29P 0044*

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

SPRING SCREW BAND INNER TO DRG NO.29P 0061* required for 0.315" Sporting Rifle

AS PER DRG NO.29P 0061* required for 0.315" Sporting Rifle

29P 0061*

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

SWIVEL SLING REAR TO DRG.NO.: 29P 0065* required for 0.315" Sporting Rifle

AS PER DRG.NO.: 29P 0065* required for 0.315" Sporting Rifle

29P 0065*

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

SPRING MAIN TO DRG. No.: 29P 0015 required for 0.315" Sporting Rifle

AS PER DRG. No.: 29P 0015 required for 0.315" Sporting Rifle

29P 0015

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

SPRING LEAF BED BACK SIGHT TO DRG. NO.29P 0008 required for 0.315" Sporting Rifle

AS PER DRG. NO.29P 0008 required for 0.315" Sporting Rifle

29P 0008

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE