Polypropylene Corrugated Packing Box to Drg. No. CO-454 B

Polypropylene Corrugated Packing Box to Drg. No. CO-454 B

CO-454 B

PROOF MACHINED BODY FOR 51 MM HE to DRG NO SK 8345 C

PROOF MACHINED BODY FOR 51 MM HE to DRG NO SK 8345 C

SK-8345/C

• AS PER ATTACHMENT

• AS PER ATTACHMENT

BRANDED PAINT MIDDLE BUFF READY MIX AIR DRYING SEMI GLOSSY AS PER IS 168 (LATEST REVISION), SHADE NO.359 OF IS:5 (LATEST REVISION)

BRANDED PAINT MIDDLE BUFF READY MIX AIR DRYING SEMI GLOSSY AS PER IS 168 (LATEST REVISION), SHADE NO.359 OF IS:5 (LATEST REVISION)

Polypropylene Corrugated packing box drg. no. CO-488 B

AS PER DRAWING

CO-488 A

PLUG TRANSIT TO DRG. NO. ITV-33 ALONG WITH WASHER TO DRG. NO. M-10688

PLUG TRANSIT TO DRG. NO. ITV-33 ALONG WITH WASHER TO DRG. NO. M-10688

PLUG REAR TO DRG NO ITV 52 IN FINISHED CONDITION

PLUG REAR TO DRG NO ITV 52 IN FINISHED CONDITION

FORGED BODY (FRONT PART) TO OFAJ DRG. NO. F-9G OR GSF DRG. NO. M-10176 B FOR BOMB 81 mm MORTAR C (EMPTY BODY)

FORGED BODY (FRONT PART) TO OFAJ DRG. NO. F-9G OR GSF DRG. NO. M-10176 B FOR BOMB 81 mm MORTAR C (EMPTY BODY)

• AS PER ATTACHMENT

• AS PER ATTACHMENT

VARNISH OIL STOVING (APC-221) GR-1 TO SPECN. JSS-8010-28

VARNISH OIL STOVING (APC-221) GR-1 TO SPECN. JSS-8010-28

BRANDED PAINT MIDDLE BUFF READY MIX AIR DRYING SEMI GLOSSY AS PER IS 168 (LATEST REVISION), SHADE NO.359 OF IS:5 (LATEST REVISION)

BRANDED PAINT MIDDLE BUFF READY MIX AIR DRYING SEMI GLOSSY AS PER IS 168 (LATEST REVISION), SHADE NO.359 OF IS:5 (LATEST REVISION)

STEEL ROUND 13 MM DIA BS 970 PT-1 :1983 GR 080 M 40

STEEL ROUND 13 MM DIA BS 970 PT-1 :1983 GR 080 M 40

AL ALLOY ROD 60 MM DIA-SPECN.IS 733:1983 GR.24345

AL ALLOY ROD 60 MM DIA-SPECN.IS 733:1983 GR.24345

OBTURATING COPPER BAND 149mm +0.7 MM O/DX 13 mm +2.00 mm WALL THICK X STANDARD LENGTH TO SPECN. IS: 2501-72, FRTP-1. ANNEALED WITH OXYGEN 0.07% MAX. AND UTS: 20 KG/mm (MIN)

OBTURATING COPPER BAND 149mm +0.7 MM O/DX 13 mm +2.00 mm WALL THICK X STANDARD LENGTH TO SPECN. IS: 2501-72, FRTP-1. ANNEALED WITH OXYGEN 0.07% MAX. AND UTS: 20 KG/mm (MIN)

• As per attachment

• As per attachment

OBTURATING COPPER BAND 149mm +0.7 MM O/DX 13 mm +2.00 mm WALL THICK X STANDARD LENGTH TO SPECN. IS: 2501-72, FRTP-1. ANNEALED WITH OXYGEN 0.07% MAX. AND UTS: 20 KG/mm (MIN)

OBTURATING COPPER BAND 149mm +0.7 MM O/DX 13 mm +2.00 mm WALL THICK X STANDARD LENGTH TO SPECN. IS: 2501-72, FRTP-1. ANNEALED WITH OXYGEN 0.07% MAX. AND UTS: 20 KG/mm (MIN)

• As per attachment

• As per attachment

HEAD(TO SK. NO. OTF/S/002)DRG. NO. 4-025998 DET. NO. 002 AND DC 35862-A DT 01/12/94 IN FINISHED CONDITION (WITHOUT SURFACE TREATMENT)

HEAD(TO SK. NO. OTF/S/002)DRG. NO. 4-025998 DET. NO. 002 AND DC 35862-A DT 01/12/94 IN FINISHED CONDITION (WITHOUT SURFACE TREATMENT)

• as per attachment
• as per attachment
• as per attachment
• as per attachment
• as per attachment

• as per attachment
• as per attachment
• as per attachment
• as per attachment
• as per attachment

PAINT PFU PRIMING RED OXIDE ZINC CH. AMN. AIRDRYING

PAINT PFU PRIMING RED OXIDE ZINC CH. AMN. AIRDRYING

PAINT PFU BLACK ACID-PROOF IND/ME/651(A)DC3754-ME

PAINT PFU BLACK ACID-PROOF IND/ME/651(A)DC3754-ME

AL. ROD 17 MM +/- 0.1 MM DIA BS 1474 DESIG 2014-A "TB"

AL. ROD 17 MM +/- 0.1 MM DIA BS 1474 DESIG 2014-A "TB"

SCREW (GSF. SK. NO. OTF/S/025) DET. NO. 058 IN F/C DRG. NO. 4-025998

SCREW (GSF. SK. NO. OTF/S/025) DET. NO. 058 IN F/C DRG. NO. 4-025998

COAPLER RING GUARD 125 MM HEAT BODY COPPER BAND UPPER PORSATION AS PER DRG NO M 10859

COAPLER RING GUARD 125 MM HEAT BODY COPPER BAND UPPER PORSATION AS PER DRG NO M 10859

APC-216 (COMPN. SEALING RD 1229) TO JSS 8010-51:1987

APC-216 (COMPN. SEALING RD 1229) TO JSS 8010-51:1987

STEEL ROUND 30.10 MM DIA ( TOL. GRADE h8) TO SPCN 53 X M1-0 TY-14-1-2232-77 & OST B 84-748-81, ANNEALED AND PEELED CONDITION TO 2.50 MTRS TO 3.00 MTRS IN STRAIGHT LENGTH. LONG STRAIGHTNESS OF ROD : 0.35 mm OR LESS PER 1000 MM. SHORT STRAIGHTNESS :0.1MM OR LESS PER 300 MM. RODS REQD TO 100% US TEST AS PER OST B-84-748-81.

STEEL ROUND 30.10 MM DIA ( TOL. GRADE h8) TO SPCN 53 X M1-0 TY-14-1-2232-77 & OST B 84-748-81, ANNEALED AND PEELED CONDITION TO 2.50 MTRS TO 3.00 MTRS IN STRAIGHT LENGTH. LONG STRAIGHTNESS OF ROD : 0.35 mm OR LESS PER 1000 MM. SHORT STRAIGHTNESS :0.1MM OR LESS PER 300 MM. RODS REQD TO 100% US TEST AS PER OST B-84-748-81.

VARNISH LW-10 APC-223 TO SPCN. JSS 8010-63:1997

VARNISH LW-10 APC-223 TO SPCN. JSS 8010-63:1997

VARNISH LW-10 APC-223 TO SPCN. JSS 8010-63:1997

VARNISH LW-10 APC-223 TO SPCN. JSS 8010-63:1997

BRANDED PAINT TURQUOISE BLUE OF STANDARD MAKE TO SPCN. IS:168-1973, ISC. NO.-102 TO SPECN IS:5-1978

BRANDED PAINT TURQUOISE BLUE OF STANDARD MAKE TO SPCN. IS:168-1973, ISC. NO.-102 TO SPECN IS:5-1978

VARNISH OIL STOVING (APC-221) GR-1 TO SPECN. JSS-8010-28

VARNISH OIL STOVING (APC-221) GR-1 TO SPECN. JSS-8010-28

As per drg. NO: M-10394

As per drg. no. M-10394

POLYPROPYLENE CORRUGATED PACKING BOX TO DRG. NO. CO-475

POLYPROPYLENE CORRUGATED PACKING BOX TO DRG. NO. CO-475

PAINT TURQUOISE BLUE RMAD SG 168/73

PAINT TURQUOISE BLUE RMAD SG 168/73

OVERHAULING OF FIRING MECHANISMS ASSY TO DRG NO 2A46 Cd10 20Cb WITH REPLACE OF OLD CONTACTOR & ELECTROMAGNET WITH NEW ONS

OVERHAULING OF FIRING MECHANISMS ASSY TO DRG NO 2A46 Cd10 20Cb WITH REPLACE OF OLD CONTACTOR & ELECTROMAGNET WITH NEW ONS

2A46 Cd10 20Cb

Fabrication of Coat Drill Khaki DB staff

FABRICATION OF COAT DRILL KHAKI DANGER BUILDING STAFF – 242 Nos. SWO PART II No. 20147/70147.

Fabrication of D/B Coat Cotton Drill White

FABRICATION OF D/B COAT COTTON DRILL WHITE - 4632 Nos SPECIFICATION: SWO PART No. 20136 /70136 (IFD

AS PER SPECIFICATION ENCLOSED.

• AS PER SPECIFICATION ENCLOSED.

• AS PER SPECIFICATION ENCLOSED.

Bullet Proof Glasses with Rubber Beading BP SML 4X4 Consisting of wind shield glass Drg No- LA/BPV/SML/GLASS/001/A qty.-2/Veh. , Driver & Co-driver glass Dr. No- LA/BPV/SML/GLASS/002/A 2 qty-2/Veh,,Side glass DR. No- LA/BPV/SML/GLASS/003/A qty-4/veh, ,Rear glass DR. NO- LA/BPV/SML/GLASS/004/A QTY-2/Veh & as per specification No.VFJ/R&D/LA/SP/BPV/GLASS/SML (4X4) dtd-14/06/2019 (Amendment no. 01 dated 20-01-2020)

SPECIFICATION NO. VFJ/R&D/LA/SP/BPV/GLASS/SML(4X4), DATED:14/06/2019 (Amendment no. 01 dated 20-01-2020)

(i) LA/BPV/SML/GLASS/001/A (ii) LA/BPV/SML/GLASS/002/A (iii) LA/BPV/SML/GLASS/003/A (iv) LA/BPV/SML/GLASS/004/A

FABRICATION OF COAT DRILL WHITE SUIT DANGER BUILDING SWO PART II No. 20129/70129.

SPECIFICATION: MAKE & SHAPE: AS PER APPROVED SAMPLE. SWO PART II No. 20129/70129. NOTE: CUT COMPONENTS AND GARNITURES WILL BE SUPPLIED BY THE FACTORY. DRAWING & SAMPLE WILL BE PROVIDED AT THE TIME OF FABRICATION, IF REQUIRED.

• REFER ANNEXED SPECIFICATION.

• REFER ANNEXED SPECIFICATION.

FABRICATION OF COAT DRILL WHITE (SUIT DANGER BUILDING FOR A.F. KHADKI) SWO PART II No. 20209/70209.

SPECIFICATION: MAKE & SHAPE: AS PER APPROVED SAMPLE. SWO PART II No. 20209/70209. NOTE: CUT COMPONENTS AND GARNITURES WILL BE SUPPLIED BY THE FACTORY. SAMPLE WILL BE PROVIDED AT THE TIME OF FABRICATION, IF REQUIRED.

Fabrication of Dust Coat DB White

FABRICATION OF DUST COAT DANGER BUILDING WHITE. SWO PART II No. 20210/70210. SPECIFICATION: NOTE: CUT COMPONENTS AND GARNITURES WILL BE SUPPLIED BY THE FACTORY. SAMPLE WILL BE PROVIDED AT THE TIME OF FABRICATION, IF REQUIRED.

cover protective dust and moisture seal MCT 2952 1

cover protective dust and moisture seal MCT 2952 1

cover protective dust and moisture seal MCT 2951 1

cover protective dust and moisture seal MCT 2951 1

CLOTH POLYESTER AND COTTON DISRUPTIVE PATTERN 220 GSM FOR JUNGLE WITH ARMY LOGO 152 CMS MINIMUM EXCLUDING SELVEDGES

SPECIFICATION NO. OCFAV/FABRIC/005

WELDING OF TRIANGULAR STAY,4071918.

WELDING OF TRIANGULAR STAY,4071918.

JUNCTION BOX SS 304,EX ENCLOSURE 200 X 250 X 121MM WITH SCREW LID LOCKING ARRANGEMENT,SS MOUNTING PLATE,MOUNTING BRACKET HAVING NATURAL BUFF FINISH EX EB IIC,-20 TO+40DEG.C,T6,IECEX,CCOE IP 66 CERTIFIED.ROSE.ORDER NO.LCP ASSEMBLED WITH FOLLOWING COMPONENTS.DIN RAIL TS 35/7.5-0.66M,SS TAG PLATE 100X20X1MM-1NO, SELECTOR SWITCH 0-I,2POSITION WITH 1NO+1NC,COLOUR BLACK BARTEC 07-3323-4400+05-0003-0009-1NO,SCRERWLESS TERMINALS ST 2.5 COLOUR GRAY PHOENIX 3031212-25 NOS.END PLATE PHOENIX 3030417-1NOS,END CLAMP PHOENIX 3022218-2 NOS,MARKERS PHOENIX 1050017-28 NOS.SCREWLESS TERMINALS ST 2.5 PE COLOUR YELLOW GREEN PHOENIX 3031238-3 NOS,CABLE ENTRY HOLES ON WALL OF ENCLOSURE

JUNCTION BOX SS 304,EX ENCLOSURE 200 X 250 X 121MM WITH SCREW LID LOCKING ARRANGEMENT,SS MOUNTING PLATE,MOUNTING BRACKET HAVING NATURAL BUFF FINISH EX EB IIC,-20 TO+40DEG.C,T6,IECEX,CCOE IP 66 CERTIFIED.ROSE.ORDER NO.LCP ASSEMBLED WITH FOLLOWING COMPONENTS.DIN RAIL TS 35/7.5-0.66M,SS TAG PLATE 100X20X1MM-1NO, SELECTOR SWITCH 0-I,2POSITION WITH 1NO+1NC,COLOUR BLACK BARTEC 07-3323-4400+05-0003-0009-1NO,SCRERWLESS TERMINALS ST 2.5 COLOUR GRAY PHOENIX 3031212-25 NOS.END PLATE PHOENIX 3030417-1NOS,END CLAMP PHOENIX 3022218-2 NOS,MARKERS PHOENIX 1050017-28 NOS.SCREWLESS TERMINALS ST 2.5 PE COLOUR YELLOW GREEN PHOENIX 3031238-3 NOS,CABLE ENTRY HOLES ON WALL OF ENCLOSURE

JUNCTION BOX SS304, EX ENCLOSURE 330X300X121MM WITH SCREW LID LOCKING ARRANGEMENT,SS MOUNTING PLATE,MOUNTING BRACKET HAVING NATURAL BUFF FINISH EX EB IIC,-20 TO+40 DEG.C,T6,IECEX,CCOE IP 66 CERTIFIED.ROSE.ORDER NO.75 TERMINAL JB ASSEMBLED WITH FOLLOWING COMPONENTS.DIN RAIL TS 35/7.5-0.66M,SS TAG PLATE 100X20X1MM-1NO,EX LABEL LAMINATED PAPER 1 NO,SCRERWLESS TERMINALS ST2.5 COLOUR GRAY PHOENIX 3031212-75 NOS. END PLATE PHOENIX 3030417-4 NOS,END CLAMP PHOENIX 3022218-4 NOS,MARKERS PHOENIX 1050017-79NOS SCREWLESS TERMINALS ST 2.5 PE COLOUR YELLOW GREEN PHOENIX 3031238-4NOS,CABLE ENTRY HOLES ON WALL OF ENCLOSURE

JUNCTION BOX SS304, EX ENCLOSURE 330X300X121MM WITH SCREW LID LOCKING ARRANGEMENT,SS MOUNTING PLATE,MOUNTING BRACKET HAVING NATURAL BUFF FINISH EX EB IIC,-20 TO+40 DEG.C,T6,IECEX,CCOE IP 66 CERTIFIED.ROSE.ORDER NO.75 TERMINAL JB ASSEMBLED WITH FOLLOWING COMPONENTS.DIN RAIL TS 35/7.5-0.66M,SS TAG PLATE 100X20X1MM-1NO,EX LABEL LAMINATED PAPER 1 NO,SCRERWLESS TERMINALS ST2.5 COLOUR GRAY PHOENIX 3031212-75 NOS. END PLATE PHOENIX 3030417-4 NOS,END CLAMP PHOENIX 3022218-4 NOS,MARKERS PHOENIX 1050017-79NOS SCREWLESS TERMINALS ST 2.5 PE COLOUR YELLOW GREEN PHOENIX 3031238-4NOS,CABLE ENTRY HOLES ON WALL OF ENCLOSURE

JUNCTION BOX SS304,EX ENCLOSURE 200X250X121MM WITH SCREW LID LOCKING ARRANGEMENT,SS MOUNTING PLATE,MOUNTING BRACKET HAVING NATURAL BUFF FINISH EX EB II C,-20 TO+40DEG.C,T6,IECEX,CCOE IP 66 CERTIFIED.ROSE.ORDER NO. 25 TERMINAL JB ASSEMBLED WITH FOLLOWING COMPONENTS,DIN RAIL TS 35/7.5-0.66M,SS TAG PLATE 100X20X1MM-1NO,SCRERWLESS TERMINALS ST2.5 COLOUR GRAY PHOENIX 3031212-25 NOS,END PLATE PHOENIX 3030417-2NOS,END CLAMP PHOENIX 3022218-2 NOS,MARKERS PHOENIX 1050017-28NOS.SCREWLESS TERMINALS ST 2.5 PE COLOUR YELLOW GREEN PHOENIX 3031238-3NOS,CABLE ENTRY HOLES ON WALL OF ENCLOSURE

JUNCTION BOX SS304,EX ENCLOSURE 200X250X121MM WITH SCREW LID LOCKING ARRANGEMENT,SS MOUNTING PLATE,MOUNTING BRACKET HAVING NATURAL BUFF FINISH EX EB II C,-20 TO+40DEG.C,T6,IECEX,CCOE IP 66 CERTIFIED.ROSE.ORDER NO. 25 TERMINAL JB ASSEMBLED WITH FOLLOWING COMPONENTS,DIN RAIL TS 35/7.5-0.66M,SS TAG PLATE 100X20X1MM-1NO,SCRERWLESS TERMINALS ST2.5 COLOUR GRAY PHOENIX 3031212-25 NOS,END PLATE PHOENIX 3030417-2NOS,END CLAMP PHOENIX 3022218-2 NOS,MARKERS PHOENIX 1050017-28NOS.SCREWLESS TERMINALS ST 2.5 PE COLOUR YELLOW GREEN PHOENIX 3031238-3NOS,CABLE ENTRY HOLES ON WALL OF ENCLOSURE

SET CONSIST OF 1) PIECE PACKING END-2 NOS TO DRG.NO.CQ(A)/AMN/2650 ISV 1823 DC 34626-A 2) PIECE PACKING BOTTOM - NOS 280 X 205X 6MM THICKS AS MENTIONED IN DRG NO CQA(A)/AMN/2650 ISV 482 GA DC 37330-A

DRG NO CQA(A)/AMN/2650 ISV 482 GA DC 37330-A

DRG NO CQA(A)/AMN/2650 ISV 482 GA DC 37330-A

DRG. NO. ARDE 2062 DET NO.1(EMPTY ASSY) & SPECN.NO.ARDE/SPECN/340 FORCING PIN ASSY. TO DRG.NO.ARDE-2062 DET.NO.07 AMENDED WIDE AL NO.18/2015.DC RCMA(AA)/1426/2 DT.10/08/15.

DRG. NO. ARDE 2062 DET NO.1(EMPTY ASSY) & SPECN.NO.ARDE/SPECN/340 FORCING PIN ASSY. TO DRG.NO.ARDE-2062 DET.NO.07 AMENDED WIDE AL NO.18/2015.DC RCMA(AA)/1426/2 DT.10/08/15.

DRG. NO. ARDE 2062 DET NO.1(EMPTY ASSY) & SPECN.NO.ARDE/SPECN/340 FORCING PIN ASSY. TO DRG.NO.ARDE-2062 DET.NO.07 AMENDED WIDE AL NO.18/2015.DC RCMA(AA)/1426/2 DT.10/08/15.

DRG. NO. ARDE 2062 DET NO.1(EMPTY ASSY) & SPECN.NO.ARDE/SPECN/340 FORCING PIN ASSY. TO DRG.NO.ARDE-2062 DET.NO.07 AMENDED WIDE AL NO.18/2015.DC RCMA(AA)/1426/2 DT.10/08/15.

TOOL CLEANING GAS HOLE ASSY.(GM 5.56MM 1A1) TO DS CAT NO.4933-000796 , DC(I) NO. 26493-SA, DT. 22-02-10

TOOL CLEANING GAS HOLE ASSY.(GM 5.56MM 1A1) TO DS CAT NO.4933-000796 , DC(I) NO. 26493-SA, DT. 22-02-10

DS CAT NO.4933-000796 , DC(I) NO. 26493-SA, DT. 22-02-10

• machining & assy.

• As per attached document of manufacturing & testing.

PIN STRAIGHT HEADLESS GAS BLOCK TO DRG.NO-ARDE/SK-2689/100 DS CAT NO-5315-009260 DC(1)26934-SA DT-07.09.16 (IN FINISHED CONDITION)

PIN STRAIGHT HEADLESS GAS BLOCK TO DRG.NO-ARDE/SK-2689/100 DS CAT NO-5315-009260 DC(1)26934-SA DT-07.09.16 (IN FINISHED CONDITION)

DRG.NO-ARDE/SK-2689/100 DS CAT NO-5315-009260 DC(1)26934-SA DT-07.09.16 (IN FINISHED CONDITION

PIN GROOVED HEADED FOR HINGE COVER TO DRG. NO.ARDE/SK- 3143/29.DS CAT NO.5315-009188 DC(I) NO.26927-SA DT.02.09.16

PIN GROOVED HEADED FOR HINGE COVER TO DRG. NO.ARDE/SK- 3143/29.DS CAT NO.5315-009188 DC(I) NO.26927-SA DT.02.09.16

DRG. NO.ARDE/SK- 3143/29.DS CAT NO.5315-009188

PIN CARRYING HANDLE TO DRG NO-ARDE/SK-3146/33 IN FINISHED CONDITION. DS CAT NO. 5315-030876,DC(I)NO.26946-SA DT.-22/09/2016

PIN CARRYING HANDLE TO DRG NO-ARDE/SK-3146/33 IN FINISHED CONDITION. DS CAT NO. 5315-030876,DC(I)NO.26946-SA DT.-22/09/2016

DRG NO-ARDE/SK-3146/33 DS CAT NO. 5315-030876

SPRING HELICAL TORSION FOR HAMMER IN F/D CONDN.TO DRG.NO.ARDE/SK-2689/131 DS CAT NO.5360-007109 DC(I)NO.26937-SA DT.09.09.16

SPRING HELICAL TORSION FOR HAMMER IN F/D CONDN.TO DRG.NO.ARDE/SK-2689/131 DS CAT NO.5360-007109 DC(I)NO.26937-SA DT.09.09.16

DRG.NO.ARDE/SK-2689/131 DS CAT NO.5360-007109 DC(I)NO.26937-SA DT.09.09.16

WALLET EMPTY (FOR 5.56MM RIFLE/LMG) TO DRG. NO. CQA(SA)SK468 , DS CAT NO. 3770-060959, SHT.1 CONSISTING OF DRG. NO. CQA(SA)SK- 468/1, DS CAT NO.3770-060959, SHT.2 .(TWO SHEETS DC(I) NO. 26528-SA, DT. 26-07-10

WALLET EMPTY (FOR 5.56MM RIFLE/LMG) TO DRG. NO. CQA(SA)SK468 , DS CAT NO. 3770-060959, SHT.1 CONSISTING OF DRG. NO. CQA(SA)SK- 468/1, DS CAT NO.3770-060959, SHT.2 .(TWO SHEETS DC(I) NO. 26528-SA, DT. 26-07-10

DRG. NO. CQA(SA)SK468 , DS CAT NO. 3770-060959, SHT.1 CONSISTING OF DRG. NO. CQA(SA)SK- 468/1, DS CAT NO.3770-060959, SHT.2 .(TWO SHEETS DC(I) NO. 26528-SA, DT. 26-07-10

TOOL REMOVING RUPTURED CARTRIDGE CASE TO DRGNO.ARDE/TA/94/12 IN FINISHED CONDITION. DS CAT NO-4933-000405DC(1) 26519-SA,DT.08-07-10

TOOL REMOVING RUPTURED CARTRIDGE CASE TO DRGNO.ARDE/TA/94/12 IN FINISHED CONDITION. DS CAT NO-4933-000405DC(1) 26519-SA,DT.08-07-10

DRGNO.ARDE/TA/94/12 IN FINISHED CONDITION. DS CAT NO-4933-000405DC(1) 26519-SA,DT.08-07-10

TOOL CLEANING GAS BLOCK TO DRG.NO.ARDE/TA/94/28 IN FINISHED CONDITION.DS CAT NO.4933-000406.DC(1)NO.26937-SA DT-9.09.16

TOOL CLEANING GAS BLOCK TO DRG.NO.ARDE/TA/94/28 IN FINISHED CONDITION.DS CAT NO.4933-000406.DC(1)NO.26937-SA DT-9.09.16

DRG.NO.ARDE/TA/94/28 IN FINISHED CONDITION.DS CAT NO.4933-000406.DC(1)NO.26937-SA DT-9.09.16

TOOL ADJUSTING SIGHT TO DRG NO.ARDE /TA/94/26IN FINISHED CONDITION.DS CAT NO-4933-000404 DC(1)NO-26467-SA DTD 23.10.09

TOOL ADJUSTING SIGHT TO DRG NO.ARDE /TA/94/26IN FINISHED CONDITION.DS CAT NO-4933-000404 DC(1)NO-26467-SA DTD 23.10.09

DRG NO.ARDE /TA/94/26IN FINISHED CONDITION.DS CAT NO-4933-000404 DC(1)NO-26467-SA DTD 23.10.09

SPRING HELICAL COMPRESSION EXTRACTOR (INNER)TO DRG. NO. ARDE SK NO. 3143/74 DS CAT NO. 5360-007115 DC(I) NO. 26402-SA DT- 22.02.2008

SPRING HELICAL COMPRESSION EXTRACTOR (INNER)TO DRG. NO. ARDE SK NO. 3143/74 DS CAT NO. 5360-007115 DC(I) NO. 26402-SA DT- 22.02.2008

DRG. NO. ARDE SK NO. 3143/74 DS CAT NO. 5360-007115 DC(I) NO. 26402-SA DT- 22.02.2008

• As per attachment

• As per attachment

SLING ASSEMBLY OF BLACK COLOUR TO DRAWING NO-CQA(SA)SK- 1000 DC(I) NO. 26582-SA DT 17-03-11 DS CAT NO. 1005-560750

SLING ASSEMBLY OF BLACK COLOUR TO DRAWING NO-CQA(SA)SK- 1000 DC(I) NO. 26582-SA DT 17-03-11 DS CAT NO. 1005-560750

DRAWING NO-CQA(SA)SK- 1000 DC(I) NO. 26582-SA DT 17-03-11 DS CAT NO. 1005-560750

ROD CLEANING SMALL ARMS TO DRG. NO. CQA(SA)SK-464, DS CAT NO . 1005-560440 CONSISTING OF EIGHT COMPONENTS. DC(I) NO. 2636 4-SA,DT. 01-08-07.

ROD CLEANING SMALL ARMS TO DRG. NO. CQA(SA)SK-464, DS CAT NO . 1005-560440 CONSISTING OF EIGHT COMPONENTS. DC(I) NO. 2636 4-SA,DT. 01-08-07.

DRG. NO. CQA(SA)SK-464, DS CAT NO . 1005-560440 CONSISTING OF EIGHT COMPONENTS. DC(I) NO. 2636 4-SA,DT. 01-08-07.

PULL THROUGH 5.56MM1A (NYLON) TO DS CAT NO. 1005-557944 DC(I) NO. 26532-SA , DT. 30-07-10

PULL THROUGH 5.56MM1A (NYLON) TO DS CAT NO. 1005-557944 DC(I) NO. 26532-SA , DT. 30-07-10

S CAT NO. 1005-557944 DC(I) NO. 26532-SA , DT. 30-07-10

• Machining & Assy.

• 1) Chemical & Mechanical properties as per std. given drawing 2) Dimensional inspection for all dimensions given in the drawing & other parameter which are mentioned in relevant drawing.

PIN LOCKING PIN FIRING IN FINISHED CONDITION TO DRG.NO-ARDE/SK-3143/78.DC(1)26929-SA.DT-03.09.2016 DS CAT NO 5315-010101.

PIN LOCKING PIN FIRING IN FINISHED CONDITION TO DRG.NO-ARDE/SK-3143/78.DC(1)26929-SA.DT-03.09.2016 DS CAT NO 5315-010101.

DRG.NO-ARDE/SK-3143/78.DC(1)26929-SA.DT-03.09.2016 DS CAT NO 5315-010101

OILER HAND WITH SCREWED CAP BRUSH AND LEATHER WASHER TO DS CAT NO.4930-000506 WITH DETAILS OF LATEST ISSUE. DC(I) 26532SA DT.30.7.10

OILER HAND WITH SCREWED CAP BRUSH AND LEATHER WASHER TO DS CAT NO.4930-000506 WITH DETAILS OF LATEST ISSUE. DC(I)26532SA DT.30.7.10

DS CAT NO.4930-000506

• Machining & assy.

• As per attached document

BOTTLE OIL MK-5,DS CAT NO.4930-000797,1005-000324, 1005-000326;1005-000327,5310-002656.DC(I)NO.26423-SA DT16.06.08.

BOTTLE OIL MK-5,DS CAT NO.4930-000797,1005-000324, 1005-000326;1005-000327,5310-002656.DC(I)NO.26423-SA DT16.06.08.

CAT NO.4930-000797,1005-000324, 1005-000326;1005-000327,5310-002656.DC(I)NO.26423-SA DT16.06.08.

HOOK TO DRG. NO. ARDE/TA/94/27DS CAT NO 5340-015108 DC(1)26928-SA DT.02-09-16

HOOK TO DRG. NO. ARDE/TA/94/27 DS CAT NO 5340-015108 DC(1)26928-SA DT.02-09-16

DS CAT NO 5340-015108

ENGINEERS BALL PEIN HAMMER 200 GRAMS TO I.S.:841-1983

ENGINEERS BALL PEIN HAMMER 200 GRAMS TO I.S.:841-1983

EXTRACTOR SMALL ARMS CARTRIDGE THROUGH MIM ROUTE / Alt Material DS.CAT.NO. 26923-SA DATED-29.08.2016.

DS.CAT.NO. 26923-SA DATED-29.08.2016.

ENGINEERS SCREW DRIVER 1.6 X 6.5 X 150 IS:844 PT-II,MAKE-TAPARIA/JHALLNI ONLY

ENGINEERS SCREW DRIVER 1.6 X 6.5 X 150 IS:844 PT-II,MAKE-TAPARIA/JHALLNI ONLY

• As per attachment

• As per attachment

DRIFT PIN IN FINISHED COND. AS PER DRG. NO. ARDE/TA/94/13. DS CAT NO- 5120-007750 DC(I)26925-SA,DTD.01.09.16

DRIFT PIN IN FINISHED COND. AS PER DRG. NO. ARDE/TA/94/13. DS CAT NO- 5120-007750 DC(I)26925-SA,DTD.01.09.16

ARDE/TA/94/13. DS CAT NO- 5120-007750 DC(I)26925-SA,DTD.01.09.16

• as per attached

• as per attached

DRIFT ARMOURER REMOVING DOWEL SLEEVE. TO DS CAT NO- 5120-007812.IN FINISHED CONDITION.WITH DC(1)NO-26925-SA DTD-01.09.16.

DRIFT ARMOURER REMOVING DOWEL SLEEVE. TO DS CAT NO- 5120-007812.IN FINISHED CONDITION.WITH DC(1)NO-26925-SA DTD-01.09.16.

NO- 5120-007812.IN FINISHED CONDITION.WITH DC(1)NO-26925-SA DTD-01.09.16.

COVER GUN MUZZLE TO DRG NO. CQA (SA) SK-974 DC(I) NO. 26578-SA DT. 04.03.11 IN FINISHED CONDITION (IN BLACK COLOUR). DS CAT NO.1005 - 560751

COVER GUN MUZZLE TO DRG NO. CQA (SA) SK-974 DC(I) NO. 26578-SA DT. 04.03.11 IN FINISHED CONDITION (IN BLACK COLOUR). DS CAT NO.1005 - 560751

DS CAT NO.1005 - 560751

COMBINATION PLIER TO I.S.3650:1981 TO SIZE-200MM. MAKE-TAPARIA/JHALANI ONLY

COMBINATION PLIER TO I.S.3650:1981 TO SIZE-200MM. MAKE-TAPARIA/JHALANI ONLY

Brush Cleaning Chamber, ARDE/TA/94/3 DS CAT No. 1005-007745

Brush Cleaning Chamber, ARDE/TA/94/3 DS CAT No. 1005-007745

ARDE/TA/94/3 DS CAT No. 1005-007745

BRUSH CLEANING BRACKET,& CYLINDER GAS TO DRG.NO-CQA(SA)SK-459,DS CAT NO-1005-560082. DC(1)NO-26532-SA,DTD-30.07.2010.

BRUSH CLEANING BRACKET,& CYLINDER GAS TO DRG.NO-CQA(SA)SK-459,DS CAT NO-1005-560082. DC(1)NO-26532-SA,DTD-30.07.2010.

DRG.NO-CQA(SA)SK-459,DS CAT NO-1005-560082. DC(1)NO-26532-SA,DTD-30.07.2010.

• Machining & fabrication

• 1) Chemical & Mechanical properties as per std. given drawing. 2) Dimensional inspection for all dimension given in the drawing & other parameter which are mentioned in relevant drawing.

FIRING ATTACHMENT BLANK AMMUNITION IN FINISHED CONDITION TO DS CAT NO-1005-007847.DC(I) 26521- SA DT. 12.07.2010

FIRING ATTACHMENT BLANK AMMUNITION IN FINISHED CONDITION TO DS CAT NO-1005-007847.DC(I) 26521- SA DT. 12.07.2010

DS CAT NO-1005-007847.DC(I) 26521- SA DT. 12.07.2010

BAG TOOL SATCHEL TO DS CAT NO 5140-000278 DC(1)NO. 26526-SA DT. 22.07.2010.

BAG TOOL SATCHEL TO DS CAT NO 5140-000278 DC(1)NO. 26526-SA DT. 22.07.2010.

DS CAT NO 5140-000278 DC(1)NO. 26526-SA DT. 22.07.2010

ADOPTER FOR CLEANING OF BORE BY PULL THROUGH OF RIFLE 5.56MMTO DRG.NO. CQA(SA)-180 DS CAT NO.1005-560405 DC (I)26520-SA DT.10/07/2010

ADOPTER FOR CLEANING OF BORE BY PULL THROUGH OF RIFLE 5.56MMTO DRG.NO. CQA(SA)-180 DS CAT NO.1005-560405 DC (I)26520-SA DT.10/07/2010

DRG.NO. CQA(SA)-180 DS CAT NO.1005-560405 DC (I)26520-SA DT.10/07/2010

MAGAZINE ASSEMBLY (30 ROUNDS TO DRG NO. ARDE-SK-2689/285, DS CAT NO. 1005-007961DC(I) NO. 26429-SA ,DT.19-08-08

MAGAZINE ASSEMBLY (30 ROUNDS TO DRG NO. ARDE-SK-2689/285, DS CAT NO. 1005-007961DC(I) NO. 26429-SA ,DT.19-08-08

DRG NO. ARDE-SK-2689/285, DS CAT NO. 1005-007961DC(I) NO. 26429-SA ,DT.19-08-08

USER HAND BOOK( MANUAL) OF LMG 5.56MM

USER HAND BOOK( MANUAL) OF LMG 5.56MM

SPANNER SINGLE ENDED. SIZE-18 MMSE 18 IS: 5167 MAKE-EVEREST/TAPARIA/JHALANI.

SPANNER SINGLE ENDED. SIZE-18 MMSE 18 IS: 5167 MAKE-EVEREST/TAPARIA/JHALANI.

MONOPOD ASSEMBLY MG 5.56MM 1A1, AS PER DS CAT NO 1005-560749 DC CAT NO. 26607-SA,DT.06.02.12 IN FINISHED CONDITION (BLACK COLOUR)

MONOPOD ASSEMBLY MG 5.56MM 1A1, AS PER DS CAT NO 1005-560749 DC CAT NO. 26607-SA,DT.06.02.12 IN FINISHED CONDITION (BLACK COLOUR)

DS CAT NO 1005-560749 DC CAT NO. 26607-SA,DT.06.02.12 IN FINISHED CONDITION (BLACK COLOUR)

• As

• As

IDENTIFICATION LIST (PARTS) LIST OF LMG5.56MM

IDENTIFICATION LIST (PARTS) LIST OF LMG5.56MM

STEEL ROUND DIA 10MM SPEC. IS:7283-1974 GD C40

STEEL ROUND DIA 10MM SPEC. IS:7283-1974 GD C40