1) Chemical & Mechanical properties as per std. given drawing.
2) Dimensional inspection, for all dimensions given in the drawing & other parameter which are mentioned in relevant drawings.
(1) LID TO DRG NO ARDE 2024/26 AMDT.NO.AL NO.671 DT 29-5-91
(2) BOOSTER TUBE TO DRG.NO.ARDE/2024/21 AMDT.NO.AL NO.616 DT 4-10-88
(3) CASE AND RING ASSY TO DRG.NO.ARDE 2024/18 AMDT. [NOTE NO. 1 ADDED DATED 25-8-86.
Specification
AS PER DRAWING
Drawing no.
Manufacturing Technology
AS PER DRAWING
Testing / Inspection Facility
AS PER SPECIFICATION
62
403
Set
1365
OFM/PV/EOI/2019/10
Ordnance Factory Muradnagar
The General Manager,
Muradnagar
Muradnagar
Uttar Pradesh
201206
A. Essential Manufacturing Facility: -
Name of Machine & instruments(Capacity/Size)
1.EPS Moulding machine with PLC control (Bed Size- 1200X1000 MM & 1400X 1200 MM)
2.Pre Expander machine(100 kg/hour)
3.CNC glue machine (Bed Size-1110x830 MM)
4.CNC Foam Cutting machine(2000 x 1500 MM)
5.Vacuum Pump(700 MM Hg Minimum)
6.Sand Cooling System(10 Ton /Hr. Minimum)
7.Sand Show ring System(10 Ton /Hr. Minimum)
8.Knockout System(1 Ton/Hr. Minimum)
9.Boiler(2 Ton Minimum)
10.Coating Mixing Tank(2 Ton Minimum)
11.Slurry Mixer
12.Letter Printing Machine
13.Heat Treatment Furnace electrically PLC based with quenching arrangement & Graph Print out
14.Hot Room For Mold drying
15.Induction Furnace(1 Ton Minimum)
B. Manufacturing Process: Casting should be made through vacuum Lost Foam castings Process.
A. Essential Manufacturing Facility: -
Name of Machine & instruments(Capacity/Size)
1.EPS Moulding machine with PLC control (Bed Size- 1200X1000 MM & 1400X 1200 MM)
2.Pre Expander machine(100 kg/hour)
3.CNC glue machine (Bed Size-1110x830 MM)
4.CNC Foam Cutting machine(2000 x 1500 MM)
5.Vacuum Pump(700 MM Hg Minimum)
6.Sand Cooling System(10 Ton /Hr. Minimum)
7.Sand Show ring System(10 Ton /Hr. Minimum)
8.Knockout System(1 Ton/Hr. Minimum)
9.Boiler(2 Ton Minimum)
10.Coating Mixing Tank(2 Ton Minimum)
11.Slurry Mixer
12.Letter Printing Machine
13.Heat Treatment Furnace electrically PLC based with quenching arrangement & Graph Print out
14.Hot Room For Mold drying
15.Induction Furnace(1 Ton Minimum)
B. Manufacturing Process: Casting should be made through vacuum Lost Foam castings Process.
A. Essential Manufacturing Facility: -
Name of Machine & instruments(Capacity/Size)
1.EPS Moulding machine with PLC control (Bed Size- 1200X1000 MM & 1400X 1200 MM)
2.Pre Expander machine(100 kg/hour)
3.CNC glue machine (Bed Size-1110x830 MM)
4.CNC Foam Cutting machine(2000 x 1500 MM)
5.Vacuum Pump(700 MM Hg Minimum)
6.Sand Cooling System(10 Ton /Hr. Minimum)
7.Sand Show ring System(10 Ton /Hr. Minimum)
8.Knockout System(1 Ton/Hr. Minimum)
9.Boiler(2 Ton Minimum)
10.Coating Mixing Tank(2 Ton Minimum)
11.Slurry Mixer
12.Letter Printing Machine
13.Heat Treatment Furnace electrically PLC based with quenching arrangement & Graph Print out
14.Hot Room For Mold drying
15.Induction Furnace(1 Ton Minimum)
B. Manufacturing Process: Casting should be made through vacuum Lost Foam castings Process.
A. Essential Manufacturing Facility: -
Name of Machine & instruments(Capacity/Size)
1.EPS Moulding machine with PLC control (Bed Size- 1200X1000 MM & 1400X 1200 MM)
2.Pre Expander machine(100 kg/hour)
3.CNC glue machine (Bed Size-1110x830 MM)
4.CNC Foam Cutting machine(2000 x 1500 MM)
Vacuum Pump(700 MM Hg Minimum)
6.Sand Cooling System(10 Ton /Hr. Minimum)
7.Sand Show ring System(10 Ton /Hr. Minimum)
8.Knockout System(1 Ton/Hr. Minimum)
9.Boiler(2 Ton Minimum)
10.Coating Mixing Tank(2 Ton Minimum)
Slurry Mixer
12.Letter Printing Machine
13.Heat Treatment Furnace electrically PLC based with quenching arrangement & Graph Print out
14.Hot Room For Mold drying
15.Induction Furnace(1 Ton Minimum)
B. Manufacturing Process: Casting should be made through vacuum Lost Foam castings Process.
1.EPS Moulding machine with PLC control (Bed Size- 1200X1000 MM & 1400X 1200 MM)
2.Pre Expander machine(100 kg/hour)
3.CNC glue machine (Bed Size-1110x830 MM)
4.CNC Foam Cutting machine(2000 x 1500 MM)
Vacuum Pump(700 MM Hg Minimum)
6.Sand Cooling System(10 Ton /Hr. Minimum)
7.Sand Show ring System(10 Ton /Hr. Minimum)
8.Knockout System(1 Ton/Hr. Minimum)
9.Boiler(2 Ton Minimum)
10.Coating Mixing Tank(2 Ton Minimum)
Slurry Mixer
12.Letter Printing Machine
13.Heat Treatment Furnace electrically PLC based with quenching arrangement & Graph Print out
14.Hot Room For Mold drying
15.Induction Furnace(1 Ton Minimum)
Manufacturing Process: Casting should be made through vacuum Lost Foam castings Process
Sub-Assembly of Wind Cheater {(Fabrication With All Input Material (Fabric and Garniture Material) except Plastic Slide Fasteners} Specification No.- As per relevant clause of provisional specification No. S/3558/A/TC-15/Coat ECC with amendment No. 1 to 6 & Annexure-‘A’ for Sub Assembly of Wind Cheater except PSF”
Specification
Sub-Assembly of Wind Cheater {(Fabrication With All Input Material (Fabric and Garniture Material) except Plastic Slide Fasteners} Specification No.- As per relevant clause of provisional specification No. S/3558/A/TC-15/Coat ECC with amendment No. 1 to 6 & Annexure-‘A’ for Sub Assembly of Wind Cheater except PSF”
LINK MK-I TO DESICNER'S REF.D.5.(E)10050/161 ISSUE 6A DATED 30-10-64 FOR 30MM ADEN AMMUNATION. NOTE:-QUALITY DOCUMENTS TO BE SUPPLIED BY FIRM AS PER ENCL
Specification
LINK MK-I TO DESICNER'S REF.D.5.(E)10050/161 ISSUE 6A DATED 30-10-64 FOR 30MM ADEN AMMUNATION. NOTE:-QUALITY DOCUMENTS TO BE SUPPLIED BY FIRM AS PER ENCL
Drawing no.
LINK MK-I TO DESICNER'S REF.D.5.(E)10050/161 ISSUE 6A DATED 30-10-64 FOR 30MM ADEN AMMUNATION. NOTE:-QUALITY DOCUMENTS TO BE SUPPLIED BY FIRM AS PER ENCL
1) Chemical & Mechanical properties as per std. given drawing.
2) Dimensional inspection, for all dimensions given in the drawing & other parameter which are mentioned in relevant drawings.
1) Chemical & Mechanical properties as per std. given drawing.
2) Dimensional inspection, for all dimensions given in the drawing & other parameter which are mentioned in relevant drawings.
1) Chemical & Mechanical properties as per std. given drawing.
2) Dimensional inspection, for all dimensions given in the drawing & other parameter which are mentioned in relevant drawings.
DISC FELT WOOL 5 MM AS PER CIA DRG.NO 12911-0-0 DC(I)34186 A, DT-3.8.87.WITH MATERIAL SPECIFICATION AS PER CL.NO.3.2 OF IS 1719 : 2000.REAFFIRMED IN 2019.(FORTH REVISION)
Specification
DISC FELT WOOL 5 MM AS PER CIA DRG.NO 12911-0-0 DC(I)34186 A, DT-3.8.87.WITH MATERIAL SPECIFICATION AS PER CL.NO.3.2 OF IS 1719 : 2000.REAFFIRMED IN 2019.(FORTH REVISION)
DISC FELT WOOL 5 MM AS PER CIA DRG.NO 12911-0-0 DC(I)34186 A, DT-3.8.87.WITH MATERIAL SPECIFICATION AS PER CL.NO.3.2 OF IS 1719 : 2000.REAFFIRMED IN 2019.(FORTH REVISION)
Cordage Braided Nylon 23 Kg Undyed
CORD NYLON BRAIDED FOR PARACHUTE 225 N WHITE
SPCN. No. IS :4227-1998 VARIETY NO. 1 EXCEPT THAT:-
NOMINAL LINEAR DENSITY CORE –-
OF YARN (DTEX), SHEATH Alternate ends of 235X1
a tolerance of and 235x2 dtex
(-)5% and (+) 10%
BREAKING LOAD ON 15CM 226 N, MIN
TEST LENGTH, N
TPM (final) 100, min
ETHYL CELLULOSE HIGH VISCOSITY TYPE N-200 CONFORMING TO SPCN CS-2724.THE MATERIAL WILL BE ACCEPTED AFTER TRIAL EXTRUSION OF SMOOTH AND TRANSPARENT E.C.SLEEVES WITHOUT ANY WRINKLES AND UNMOLTEN PARTICLES AND FREE FROM FOREIGN MATTER AND MEETING MECHANICAL PROPERTIES.
Specification
ETHYL CELLULOSE HIGH VISCOSITY TYPE N-200 CONFORMING TO SPCN CS-2724.THE MATERIAL WILL BE ACCEPTED AFTER TRIAL EXTRUSION OF SMOOTH AND TRANSPARENT E.C.SLEEVES WITHOUT ANY WRINKLES AND UNMOLTEN PARTICLES AND FREE FROM FOREIGN MATTER AND MEETING MECHANICAL PROPERTIES.
Poly Plastic Tape White 12 mm printed with OPF Kanpur in green- colour for semi automatic – strapping device is as per Specification –
1- Colour of tape - White
2- Colour of letter – Green
3- Breaking strength – 70 to 85 kgs.
4- Sealing Temperature – 165 degree centigrade
5- Size 12 mm width X 0.50 mm thick approx.
6-Sporn (paper cone) size O/D 227 MM X I/D 203 MM
7- Length of roll (standard) 1800 mtrs
8- Printing of word OPF KANPUR on the tape white at a gap of 6” word size 8 mm.
1) Chemical & Mechanical properties as per std. given drawing.
2) Dimensional inspection, for all dimensions given in the drawing & other parameter which are mentioned in relevant drawings.
1) Chemical & Mechanical properties as per std. given drawing.
2) Dimensional inspection, for all dimensions given in the drawing & other parameter which are mentioned in relevant drawings.
1) Chemical & Mechanical properties as per std. given drawing.
2) Dimensional inspection, for all dimensions given in the drawing & other parameter which are mentioned in relevant drawings.
SWITCH NO 5 PRESSURE MK-1/L EMPTY ASSEMBLED TO DESIG REF NO.DD(L)15260 DC36836-A DT. 14-6-2002. ( WITH EXTENSION ROD,EXTENSION SOCKET AND WITHOUT SNOUT SWITCH CAPPED MK-2NOTE.:SPECIAL INSTRUCTION FOR PROOF IS ENCLOSED
Specification
SWITCH NO 5 PRESSURE MK-1/L EMPTY ASSEMBLED TO DESIG REF NO.DD(L)15260 DC36836-A DT. 14-6-2002. ( WITH EXTENSION ROD,EXTENSION SOCKET AND WITHOUT SNOUT SWITCH CAPPED MK-2NOTE.:SPECIAL INSTRUCTION FOR PROOF IS ENCLOSED
Drawing no.
SWITCH NO 5 PRESSURE MK-1/L EMPTY ASSEMBLED TO DESIG REF NO.DD(L)15260 DC36836-A DT. 14-6-2002. ( WITH EXTENSION ROD,EXTENSION SOCKET AND WITHOUT SNOUT SWITCH CAPPED MK-2NOTE.:SPECIAL INSTRUCTION FOR PROOF IS ENCLOSED
