Cordage Nylon BS 250 Kgf Cored Red

IS: 4227-vty. 12

• As per Specification/Drawing

• As per Specification/Drawing

Tape Nylon Braided 2-3 mm 22 Kgf Treated

ADRDE/QMS/TGTE/C/2022/07 dtd. 13.07.2022

• As per Specification/Drawing

• As per Specification/Drawing

Tape Nylon 25 mm BS 2354 n (240 Kgf) SG

ADRDE/QMS/TGTE/T/2021/01(a) dtd. 13.01.2022

• As per Specification/Drawing

• As per Specification/Drawing

Tape Nylon 19 mm BS 1785 N (182 Kgf) SG

ADRDE/QMS/TGTE/T/2022/03 dtd. 13.01.2022.

• As per Specification/Drawing

• As per Specification/Drawing

Cordage Dyneema BS 450 Kgf Resin Treated UD

ADRDE/QMS/TDTM/C/2012/02(a) dtd. 12.07.2022

• As per Specification/Drawing

• As per Specification/Drawing

Tape Nylon Black Stretch 26 mm BS 1050N BS

ADRDE/QMS/TGTE/T/2019/07 Date: 21.06.2019

• As per Specification/Drawing

• As per Specification/Drawing

ALUMINIUM ALLOY BILLETS OF GRADE ABT 101 SPECIFICATIONS OST B3-75-86 AND SIZE: DIA 485 X 600 MM LENGTH. SCOPE OF SUPPLY AS PER ANNEXURE – B

ALUMINIUM ALLOY BILLETS OF GRADE ABT 101 SPECIFICATIONS OST B3-75-86 AND SIZE: DIA 485 X 600 MM LENGTH. SCOPE OF SUPPLY AS PER ANNEXURE – B

• Annexure- B
• Pre-qualification Criteria (PQC)

• QMI

ALUMINIUM ALLOY BILLETS OF GRADE ABT 101 SPECIFICATIONS OST B3-75-86 AND SIZE: 385 DIA X 600 MM LENGTH. SCOPE OF SUPPLY AS PER ANNEXURE – A.

ALUMINIUM ALLOY BILLETS OF GRADE ABT 101 SPECIFICATIONS OST B3-75-86 AND SIZE: 385 DIA X 600 MM LENGTH. SCOPE OF SUPPLY AS PER ANNEXURE – A.

• As per annexure A
• As per Pre-qualification criteria (PQC)

• As per QMI

PIPE COUPLING AIR LINE 1015 000276

PIPE COUPLING AIR LINE 1015 000276

• AS per Drg

• As per QAP

DISC ALUMINIUM TO DRG.NO.6387457 DCI 36490 A

DISC ALUMINIUM TO DRG.NO.6387457 DCI 36490 A

• Machining operation Tolerance measurement Surface Treatment Injection/Compression Moulding process/Foaming Thermoforming, Extrusion Knitting Perforating Machine for cutting Turning Milling Shaping

• Testing for NABL as per specification

CAPSULE ALUMINIUM TO DRG.NO.6387453 DCI 36490 A FOR SHELL M-107 FOR 155MM AMMN.

CAPSULE ALUMINIUM TO DRG.NO.6387453 DCI 36490 A FOR SHELL M-107 FOR 155MM AMMN.

• Machining operation Surface Treatment Pressing Drawing operation Hydraulic Power Press lathe

• General Engineering test equipment

SYNTHETIC (PLASTIC) SLIDE FASTENER OPEN END AUTO LOCK NAVY BLUE 72 CM MEDIUM SPECIAL DUTY

IS: 14181 - 2002

• AS PER SPECIFICATION

• AS PER SPECIFICATION

SYNTHETIC (PLASTIC) SLIDE FASTENER NAVY BLUE 32 CM CLOSE END MEDIUM SPECIAL DUTY

IS:14181 - 2002

• AS SPECIFICATION

• AS SPECIFICATION

SYNTHETIC (PLASTIC) SLIDE FASTENER NAVY BLUE 20 CM CLOSED END LIGHT SPECIAL DUTY

SPECN. NO. IS: 14181 – 2002

• AS PER SPECIFICATION

• AS PER SPECIFICATION

ALUMINIUM ALLOY 7075-T6510, SINGLE EXTRUDED BARS DIA 135.0MM ACCORDING TO ASTM B 221M AS PER HAPP SPECIFICATION NO.HAPP /QA/ SPEC/008

ALUMINIUM ALLOY 7075-T6510, SINGLE EXTRUDED BARS DIA 135.0MM ACCORDING TO ASTM B 221M AS PER HAPP SPECIFICATION NO.HAPP /QA/ SPEC/008

• as per enclosed specification

• as per enclosed specification

ALUMINIUM ALLOY 7075-T6510, SINGLE EXTRUDED BARS DIA 135.0MM ACCORDING TO ASTM B 221M AS PER HAPP SPECIFICATION NO.HAPP /QA/ SPEC/008

ALUMINIUM ALLOY 7075-T6510, SINGLE EXTRUDED BARS DIA 135.0MM ACCORDING TO ASTM B 221M AS PER HAPP SPECIFICATION NO.HAPP /QA/ SPEC/008

• as per enclosed specification

• as per enclosed specification

PACKING BOX FOR RGB 60 AS PER DRG NO H RGB 060 1 057

as per enclosure

• as per enclosure

• as per enclosure

MILL BOARD AMMN. OF SIZE 787MM X 559MM X 1.25MM THICK TO SPECN.JSS:9310-01-2014(REV.NO.3) DS-CAT-NO-9310-000001 DC NO 5290 ME -16/12/2014.

SPECN.JSS:9310-01-2014(REV.NO.3) DS-CAT-NO-9310-000001 DC NO 5290 ME -16/12/2014

• AS PER DRAWING

• AS PER DRAWING

CARTG EOFE.2 PIN NO.3 MK-3 (EMPTY ASSY.) TO DRG.NO.TRD- 3-2-1879a AND SPECN.NO. ARDE/SPECN/229.

CARTG EOFE.2 PIN NO.3 MK-3 (EMPTY ASSY.) TO DRG.NO.TRD- 3-2-1879a AND SPECN.NO. ARDE/SPECN/229.

• WILL BE UPLOADED

• WILL BE UPLOADED

3-PIN NO-1 MK-3 CARTG. ELECTRIC OPERATING FIRE EXTINGUSHER (EMPTY ASSEMBLY) TO DRG NO.TRD-3-2-1877 AND SPECN.NO.ARDE/SPECN/264.

3-PIN NO-1 MK-3 CARTG. ELECTRIC OPERATING FIRE EXTINGUSHER (EMPTY ASSEMBLY) TO DRG NO.TRD-3-2-1877 AND SPECN.NO.ARDE/SPECN/264.

• attached

• attached

CARTG. ELECTRIC OPERATING FIRE EXTINGUISHER 3 PIN NO.3 MK-3 (EMPTY ASSY) TO DRG.NO.TRD-3-2-1881 AND SPECN.NO. ARDE/SPECN/290.

CARTG. ELECTRIC OPERATING FIRE EXTINGUISHER 3 PIN NO.3 MK-3 (EMPTY ASSY) TO DRG.NO.TRD-3-2-1881 AND SPECN.NO. ARDE/SPECN/290.

• as per file attached

• as per file attached

CARTG.ELECTRIC OPERATING FIRE EXTENGUISHER 2PIN NO.1MK-3 (EMPTY ASSY) TO DRG.NO.TRD-3-1-2135.AND SPECN.NO. ARDE/SPCEN/124.FOR AIR FORCE WITH ECCENTIRICITY 0.55MM (INCLUSIVE EMPTY & FILLED PROOF).

CARTG.ELECTRIC OPERATING FIRE EXTENGUISHER 2PIN NO.1MK-3 (EMPTY ASSY) TO DRG.NO.TRD-3-1-2135.AND SPECN.NO. ARDE/SPCEN/124.FOR AIR FORCE WITH ECCENTIRICITY 0.55MM (INCLUSIVE EMPTY & FILLED PROOF).

• attached

• attached

BUCKLE BRASS 25 MM WITH LOOP POLISHED

SPECN. NO. IND/GS/1541 (5627/PK)

• AS PER TENDER

• AS PER TENDER

Fabrication of Para 105 mm

As per Drawing/Tech Particulars attached.

• As per Drawing/Specification

• As per Drawing/Specification

Sub Assembly of Brake Para as per Drg No. 2-14R45/EBF(9)

Drg No. 2-14R45/EBF(9)

• Drg No. 2-14R45/EBF(9)

• As per Drawing / specification

LUG SUSPENSION NO. 318 (MACHINED)

LUG SUSPENSION NO. 318 (MACHINED) AS PER DRAWING NUMBER ARM 1302C5 (R.NO.4, DATED 09/02/2023)

DRAWING NUMBER ARM 1302C5 (R.NO.4, DATED 09/02/2023)

• 1.Forging Hammer (min 1 ton) of adequate capacity 2.Centre Lathe/CNC Lathe 3.Drilling Machine

• 1.Chemical testing facility. 2.Mechanical testing facility (UTS,YS, elongation, hardness).

CLOTH DRILL COTTON DISRUPTIVE PATTERN (VAT PRINTED) FOR BANDOLIERS WIDTH 142 CM (MIN.) SPECIFICATION NO. JSS 8315-08:2021 (THIRD REVISION)

CLOTH DRILL COTTON DISRUPTIVE PATTERN (VAT PRINTED) FOR BANDOLIERS WIDTH 142 CM (MIN.) SPECIFICATION NO. JSS 8315-08:2021 (THIRD REVISION)

• AS PER ATTACHED FILE

• AS PER ATTACHED FILE

BRACKET

AS PER DRG

172.18.074CB

• VQC TO BE SUBMITTED BY THE FIRM AS PER BLANK VQC FORMAT
• -
• -
• -
• -

• VQC TO BE SUBMITTED BY THE FIRM AS PER BLANK VQC FORMAT
• -
• -
• -
• -

FILLING PLUG (MACHINED)

FILLING PLUG (MACHINED). AS PER DRAWING ARM 1172B5 (R.NO. 4, DATED 25/04/89)

ARM 1172B5 (R.NO. 4, DATED 25/04/89)

• 1.Forging Hammer (min 1 ton) of adequate capacity, 2.Centre Lathe/CNC Lathe ,3.Drilling Machine

• 1.Chemical testing facility. ,2.Mechanical testing facility (UTS,YS, elongation, hardness).

NG BARRIER FOR 125 MM RESIN BASE SCC” SPECIFICATION: NG BARRIER FOR 125MM RESIN BASED SCCC TO DRG. NO. HEMRL/CCC/125/FS/2014-1

NG BARRIER FOR 125 MM RESIN BASE SCC” SPECIFICATION: NG BARRIER FOR 125MM RESIN BASED SCCC TO DRG. NO. HEMRL/CCC/125/FS/2014-1

NG BARRIER FOR 125 MM RESIN BASE SCC” SPECIFICATION: NG BARRIER FOR 125MM RESIN BASED SCCC TO DRG. NO. HEMRL/CCC/125/FS/2014-1

• Nitro glycerine manufacturing equipment, Rolling machine, Power press, Cutting/Sizing machine

• Chemical composition test, Height, Width, Weight, Thickness as per QAP/Drg General purpose engg instrument. Testing from NABL as per specification.

AS/ GCF/SIZE/SPECIFICATION

AS/ GCF/SIZE/SPECIFICATION

• AS PER TECHNICAL SPECIFICATION

• AS P[ER QAP

GREEN COLOUR/WHITE COLOUR AS PER DRG NO. OFBA/NCP/EXPN/16 DT. 07.6.67

GREEN COLOUR/WHITE COLOUR AS PER DRG NO. OFBA/NCP/EXPN/16 DT. 07.6.67

DRG NO. OFBA/NCP/EXPN/16 DT. 07.6.67

• MSME

• MSME

SUB ASSEMBLY OF BRAKE PARACHUTE AS PER OPF DRAWING NO. 1-14R45/ADOB-00

SUB ASSEMBLY OF BRAKE PARACHUTE AS PER OPF DRAWING NO. 1-14R45/ADOB-00

1-14R45/ADOB-00

• AS PER DRAWING / SPECIFICATION

• AS PER DRAWING / SPECIFICATION

FUZE B 25M EMPTY FOR 140MM ROCKET DRG NO NASK 778 P DT 07 OCT 2002

FUZE B 25M EMPTY FOR 140MM ROCKET DRG NO NASK 778 P DT 07 OCT 2002

FUZE B 25M EMPTY FOR 140MM ROCKET DRG NO NASK 778 P DT 07 OCT 2002

• LATHE/CNC, CHROMATE PASSIVATION, TINNING ZINC/CADMIUM PLATING, NICKEL PLATING, HYDROLIC/POWER PRESS, DRILLING

• BOUNCE TEST, SALT SPRAY RUST PROOF TEST, HARDNESS TEST. TESTING FROM NABL AS PER SPECIFICATION. VARIOUS GAUGES AND GENERAL PURPOSE ENGG.

LT SQUIB BRIDGED TO DRG NO. ERDL DRG 563 DETAIL NO.6 & 7 (7 STRAND TINNED COPPER WIRE TO DEF STANDARD -61--12 PART 6/ISSUE)

LT SQUIB BRIDGED TO DRG NO. ERDL DRG 563 DETAIL NO.6 & 7 (7 STRAND TINNED COPPER WIRE TO DEF STANDARD -61--12 PART 6/ISSUE)

LT SQUIB BRIDGED TO DRG NO. ERDL DRG 563 DETAIL NO.6 & 7 (7 STRAND TINNED COPPER WIRE TO DEF STANDARD -61--12 PART 6/ISSUE)

• INJECTION MOULDING, LATHE, DRILLING, GOLD PLATING AS PER SPEC, MULITI METER, CHROMATING, CUTTING/SIZING. OHMMETER, MOULDING, SLODERING, TRIMMING, ANNEALED CONDITION.

• NON-CONTINUITY TEST (MULTI METER) PLATING THICKNESS GENERAL ENGINEERING EQUIPMENT'S FOR MEASUREMENT

DRUM RH AND LH TO DRG NO 175 40 017 A AND 018 A F

GOST 4543 71

175 40 017 A AND 018 A F

• As per VQC

• As per QAP

BLANK SIZE FOR RING RACE LOWER TO DRG NO 434 12 007 F

TY 14 1 2982 80

434 12 007 F

• As per VQC

• As per QAP

BLANK SIZE FOR RING RACE UPPER TO DRG NO 172 12 031 F

TY 14 1 2982 80

172 12 031 F

• As per VQC

• As per QAP

Screw Barrel Mount for 9X19 mm Machine Pistol as per drawing no. 2101 01 02 01 05 004 00DA

Screw Barrel Mount for 9X19 mm Machine Pistol as per drawing no. 2101 01 02 01 05 004 00DA

2101 01 02 01 05 004 00DA

• As per drawing

• As per drawing

Barrel Adapter Left for 9X19 mm Machine Pistol as per drawing no. 2101 01 02 01 05 003 00DA

Barrel Adapter Left for 9X19 mm Machine Pistol as per drawing no. 2101 01 02 01 05 003 00DA

2101 01 02 01 05 003 00DA

• As per drawing

• As per drawing

Barrel Adapter Right for 9X19 mm Machine Pistol as per drawing no. 2101 01 02 01 05 002 00DA

Barrel Adapter Right for 9X19 mm Machine Pistol as per drawing no. 2101 01 02 01 05 002 00DA

2101 01 02 01 05 002 00DA

• As per drawing

• As per drawing

Ejector 9 mm for 9X19 mm Machine Pistol as per drawing no. 2101 01 02 01 05 007 00DA

Ejector 9 mm for 9X19 mm Machine Pistol as per drawing no. 2101 01 02 01 05 007 00DA

2101 01 02 01 05 007 00DA

• As per drawing

• As per drawing

DRAG TYPE EDDY CURRENT TACHOMETER TE 4B SPECIFICATIONS TO SPEC. TY:25-02-1500-TE-4B

TY:25-02-1500-TE-4B

TY:25-02-1500-TE-4B

• ATTACHED

• ATTACHED

Fore Sight for 9X19 mm Machine Pistol as per drawing no. 2101 01 02 01 05 010 00DA

Fore Sight for 9X19 mm Machine Pistol as per drawing no. 2101 01 02 01 05 010 00DA

2101 01 02 01 05 010 00DA

• As per drawing

• As per drawing

MAIN SPRING , 432.23.058-1

AS PER DRAWING

432.23.058-1

• AS PER VQC ATTACHED
• -
• -
• --
• -

• AS PER VQC ATTACHED
• -
• -
• -
• -

CYLINDER GAS AS PER DRG.NO.1804 01 01 01 00 001 00DA REQUIRED FOR LMG 7.62MM X 51MM BELT FED

CYLINDER GAS AS PER DRG.NO.1804 01 01 01 00 001 00DA REQUIRED FOR LMG 7.62MM X 51MM BELT FED

1804 01 01 01 00 001 00DA

• Forging, Machining

• 1) Chemical & Mechanical properties as per std. given drawing. 2) Dimensional inspection, for all dimensions given in the drawing & other parameter which are mentioned in relevant drawings.

EPICYCLIC GEAR OF 4TH PLANETARY SET 172.40.311

EPICYCLIC GEAR OF 4TH PLANETARY SET 172.40.311

172.40.311

• AS PER VQC

• AS PER VQC

NYLON 6, 6 FABRIC WITH BREATHABLE MEMBRANE FOR RAIN CAPE, 120+-10 GSM, NAVY BLUE COLOR, WITH 150(+ 2 -0) CMS

AS PER REQUIREMENT & SPECIFICATION

• AS PER REQUIREMENT & SPECIFICATION

• AS PER REQUIREMENT & SPECIFICATION

(1) LID TO DRG NO ARDE 2024/26 AMDT.NO.AL NO.671 DT 29-5-91 (2) BOOSTER TUBE TO DRG.NO.ARDE/2024/21 AMDT.NO.AL NO.616 DT 4-10-88 (3) CASE AND RING ASSY TO DRG.NO.ARDE 2024/18 AMDT. [NOTE NO. 1 ADDED DATED 25-8-86.

AS PER DRAWING

• AS PER DRAWING

• AS PER SPECIFICATION

Bearing Housing Blank DRG. No- 3052979(New Drg. No. GCF/50/39476)

As per Annexure A

DRG. No- 3052979(New Drg. No. GCF/50/39476)

• A. Essential Manufacturing Facility: - Name of Machine & instruments(Capacity/Size) 1.EPS Moulding machine with PLC control (Bed Size- 1200X1000 MM & 1400X 1200 MM) 2.Pre Expander machine(100 kg/hour) 3.CNC glue machine (Bed Size-1110x830 MM) 4.CNC Foam Cutting machine(2000 x 1500 MM)
• 5.Vacuum Pump(700 MM Hg Minimum) 6.Sand Cooling System(10 Ton /Hr. Minimum) 7.Sand Show ring System(10 Ton /Hr. Minimum) 8.Knockout System(1 Ton/Hr. Minimum) 9.Boiler(2 Ton Minimum) 10.Coating Mixing Tank(2 Ton Minimum)
• 11.Slurry Mixer 12.Letter Printing Machine 13.Heat Treatment Furnace electrically PLC based with quenching arrangement & Graph Print out 14.Hot Room For Mold drying 15.Induction Furnace(1 Ton Minimum)
• B. Manufacturing Process: Casting should be made through vacuum Lost Foam castings Process.

• C. Testing Facilities: Firm must have all desirable testing Facilities for testing of castings as per OFM specification/Annexure.

Cradle DRG. No.- 188.94.082

Cradle DRG. No.- 188.94.082, As per annexure E

DRG. No.- 188.94.082

• A. Essential Manufacturing Facility: - Name of Machine & instruments(Capacity/Size) 1.EPS Moulding machine with PLC control (Bed Size- 1200X1000 MM & 1400X 1200 MM) 2.Pre Expander machine(100 kg/hour) 3.CNC glue machine (Bed Size-1110x830 MM) 4.CNC Foam Cutting machine(2000 x 1500 MM)
• 5.Vacuum Pump(700 MM Hg Minimum) 6.Sand Cooling System(10 Ton /Hr. Minimum) 7.Sand Show ring System(10 Ton /Hr. Minimum) 8.Knockout System(1 Ton/Hr. Minimum) 9.Boiler(2 Ton Minimum) 10.Coating Mixing Tank(2 Ton Minimum)
• 11.Slurry Mixer 12.Letter Printing Machine 13.Heat Treatment Furnace electrically PLC based with quenching arrangement & Graph Print out 14.Hot Room For Mold drying 15.Induction Furnace(1 Ton Minimum)
• B. Manufacturing Process: Casting should be made through vacuum Lost Foam castings Process.

• C. Testing Facilities: Firm must have all desirable testing Facilities for testing of castings as per OFM specification/Annexure.

Bracket DRG.No.- 2025651 (New Drg. no.- GCF/50/39467)

Bracket DRG.No.- 2025651 (New Drg. no.- GCF/50/39467) As per annexure D

DRG.No.- 2025651 (New Drg. no.- GCF/50/39467)

• A. Essential Manufacturing Facility: - Name of Machine & instruments(Capacity/Size) 1.EPS Moulding machine with PLC control (Bed Size- 1200X1000 MM & 1400X 1200 MM) 2.Pre Expander machine(100 kg/hour) 3.CNC glue machine (Bed Size-1110x830 MM) 4.CNC Foam Cutting machine(2000 x 1500 MM)
• 5.Vacuum Pump(700 MM Hg Minimum) 6.Sand Cooling System(10 Ton /Hr. Minimum) 7.Sand Show ring System(10 Ton /Hr. Minimum) 8.Knockout System(1 Ton/Hr. Minimum) 9.Boiler(2 Ton Minimum) 10.Coating Mixing Tank(2 Ton Minimum)
• 11.Slurry Mixer 12.Letter Printing Machine 13.Heat Treatment Furnace electrically PLC based with quenching arrangement & Graph Print out 14.Hot Room For Mold drying 15.Induction Furnace(1 Ton Minimum)
• B. Manufacturing Process: Casting should be made through vacuum Lost Foam castings Process.

• C. Testing Facilities: Firm must have all desirable testing Facilities for testing of castings as per OFM specification/Annexure.

Bracket DRG. No. 2025460 (New DRG.no- GCF/50/39490

Bracket DRG. No. 2025460 (New DRG.no- GCF/50/39490 As per Annexure C

DRG.no- GCF/50/39490

• A. Essential Manufacturing Facility: - Name of Machine & instruments(Capacity/Size) 1.EPS Moulding machine with PLC control (Bed Size- 1200X1000 MM & 1400X 1200 MM) 2.Pre Expander machine(100 kg/hour) 3.CNC glue machine (Bed Size-1110x830 MM) 4.CNC Foam Cutting machine(2000 x 1500 MM)
• Vacuum Pump(700 MM Hg Minimum) 6.Sand Cooling System(10 Ton /Hr. Minimum) 7.Sand Show ring System(10 Ton /Hr. Minimum) 8.Knockout System(1 Ton/Hr. Minimum) 9.Boiler(2 Ton Minimum) 10.Coating Mixing Tank(2 Ton Minimum)
• Slurry Mixer 12.Letter Printing Machine 13.Heat Treatment Furnace electrically PLC based with quenching arrangement & Graph Print out 14.Hot Room For Mold drying 15.Induction Furnace(1 Ton Minimum)
• B. Manufacturing Process: Casting should be made through vacuum Lost Foam castings Process.

• C. Testing Facilities: Firm must have all desirable testing Facilities for testing of castings as per OFM specification/Annexure.

Bearing Housing Blank DRG.No- 30522978(New DRG. NoGCF/50/39491 As per Annexure B

Bearing Housing Blank DRG.No- 30522978(New DRG. NoGCF/50/39491 As per Annexure B

DRG. NoGCF/50/39491

• 1.EPS Moulding machine with PLC control (Bed Size- 1200X1000 MM & 1400X 1200 MM) 2.Pre Expander machine(100 kg/hour) 3.CNC glue machine (Bed Size-1110x830 MM) 4.CNC Foam Cutting machine(2000 x 1500 MM)
• Vacuum Pump(700 MM Hg Minimum) 6.Sand Cooling System(10 Ton /Hr. Minimum) 7.Sand Show ring System(10 Ton /Hr. Minimum) 8.Knockout System(1 Ton/Hr. Minimum) 9.Boiler(2 Ton Minimum) 10.Coating Mixing Tank(2 Ton Minimum)
• Slurry Mixer 12.Letter Printing Machine 13.Heat Treatment Furnace electrically PLC based with quenching arrangement & Graph Print out 14.Hot Room For Mold drying 15.Induction Furnace(1 Ton Minimum)
• Manufacturing Process: Casting should be made through vacuum Lost Foam castings Process

• Testing Facilities: Firm must have all desirable testing Facilities for testing of castings as per OFM specification/Annexure

Packing Box for Revolver 0.32 Side Swing DRG No.SK-6263 R/SW.

Packing Box for Revolver 0.32 Side Swing DRG No.SK-6263 R/SW.

DRG No.SK-6263 R/SW.

• AS PER DRAWING

• AS PER DRAWING

Sub-Assembly of Wind Cheater {(Fabrication With All Input Material (Fabric and Garniture Material) except Plastic Slide Fasteners} Specification No.- As per relevant clause of provisional specification No. S/3558/A/TC-15/Coat ECC with amendment No. 1 to 6 & Annexure-‘A’ for Sub Assembly of Wind Cheater except PSF”

Sub-Assembly of Wind Cheater {(Fabrication With All Input Material (Fabric and Garniture Material) except Plastic Slide Fasteners} Specification No.- As per relevant clause of provisional specification No. S/3558/A/TC-15/Coat ECC with amendment No. 1 to 6 & Annexure-‘A’ for Sub Assembly of Wind Cheater except PSF”

• AS PER ATTACHED FILE
• AS PER ATTACHED Manufacturing Technology FILE

• AS PER ATTACHED Testing / Inspection Facility FILE

Housing Fore Sight for 9X19 mm Machine Pistol as per drawing no. 2101 01 02 01 05 009 00DA

Housing Fore Sight for 9X19 mm Machine Pistol as per drawing no. 2101 01 02 01 05 009 00DA

2101 01 02 01 05 009 00DA

• As per drawing

• As per drawing

Rear sight for 9X19 mm Machine Pistol as per drawing no. 2101 01 02 01 05 012 00DA

Rear sight for 9X19 mm Machine Pistol as per drawing no. 2101 01 02 01 05 012 00DA

2101 01 02 01 05 012 00DA

• As per drawing

• As per drawing

GRAPHITE DRY SULPHUR FREE TO SPECN. NO. JSS-9620-01-2021 (REV.NO.4), SIZE - 63 MICROMETER.

GRAPHITE DRY SULPHUR FREE TO SPECN. NO. JSS-9620-01-2021 (REV.NO.4), SIZE - 63 MICROMETER.

• MSME

• GRAPHITE DRY SULPHUR FREE TO SPECN. NO. JSS-9620-01-2021 (REV.NO.4), SIZE - 63 MICROMETER.

BLEACHED COTTON LINTER (BCL)

BLEACHED COTTON LINTER (BCL) NC Note No. 014402/OFN/Prod/Genl Dated 15.05.2023 ATTACHED ANNEXURE A

• MSME

• AS PER ANNEXURE

Mfg Supply of Ramp Back Sight ICR 1253 to DS Cat No 1005 001606 DC No 27045 SA Dt 24 03 17 fully finished with firms material required for 7 62mm

Mfg Supply of Ramp Back Sight ICR 1253 to DS Cat No 1005 001606 DC No 27045 SA Dt 24 03 17 fully finished with firms material required for 7 62mm

ICR 1253

• Mfg Supply of Ramp Back Sight ICR 1253 to DS Cat No 1005 001606 DC No 27045 SA Dt 24 03 17 fully finished with firms material required for 7 62mm

• Mfg Supply of Ramp Back Sight ICR 1253 to DS Cat No 1005 001606 DC No 27045 SA Dt 24 03 17 fully finished with firms material required for 7 62mm

ADDITIVE LINER(76.2) TO DRG. NO ARDE-1716 DET NO. 7 (PROVISIONAL) R. NO. 8 DATED 10/01/2012 ARD-2423..

ADDITIVE LINER(76.2) TO DRG. NO ARDE-1716 DET NO. 7 (PROVISIONAL) R. NO. 8 DATED 10/01/2012 ARD-2423..

• attached

• attached

LINK MK-I TO DESICNER'S REF.D.5.(E)10050/161 ISSUE 6A DATED 30-10-64 FOR 30MM ADEN AMMUNATION. NOTE:-QUALITY DOCUMENTS TO BE SUPPLIED BY FIRM AS PER ENCL

LINK MK-I TO DESICNER'S REF.D.5.(E)10050/161 ISSUE 6A DATED 30-10-64 FOR 30MM ADEN AMMUNATION. NOTE:-QUALITY DOCUMENTS TO BE SUPPLIED BY FIRM AS PER ENCL

LINK MK-I TO DESICNER'S REF.D.5.(E)10050/161 ISSUE 6A DATED 30-10-64 FOR 30MM ADEN AMMUNATION. NOTE:-QUALITY DOCUMENTS TO BE SUPPLIED BY FIRM AS PER ENCL

• attached

• attached

GEAR CROWN 3RD PLANETARY GEAR SET 172.40.247

GEAR CROWN 3RD PLANETARY GEAR SET 172.40.247

172.40.247

• AS PER VQC

• AS PER VQC

CROWN GEAR OF 3RD PLANETARY GEAR SET 172.40.310

CROWN GEAR OF 3RD PLANETARY GEAR SET 172.40.310

• AS PER VQC

• AS PER VQC

BOOSTER 172.40.324

BOOSTER 172.40.324

172.40.324

• AS PER VQC

• AS PER VQC

INNER BOOSTER 172.40.323

INNER BOOSTER 172.40.323

172.40.323

• AS PER VQC

• AS PER VQC

BOOSTER 172.40.322

BOOSTER 172.40.322

172.40.322

• AS PER VQC

• AS PER VQC

BOOSTER 172.40.270-1

BOOSTER 172.40.270-1

172.40.270-1

• AS PER VQC

• AS PER VQC

CROWN 172.40.320

CROWN 172.40.320

172.40.320

• AS PER VQC

• AS PER VQC

FAN HUB 175.41.050

FAN HUB 175.41.050

175.41.050

• AS PER VQC

• AS PER VQC

FAN HUB

FAN HUB

188.41.006

• AS PER VQC ATTACHED

• AS PER VQC ATTACHED

TRIGGER MECHANISM ASSEMBLY AS PER DRG.NO. 1804 01 01 02 00 000 00DA REQUIRED FOR LMG 7.62MM X 51MM BELT FED

TRIGGER MECHANISM ASSEMBLY AS PER DRG.NO. 1804 01 01 02 00 000 00DA REQUIRED FOR LMG 7.62MM X 51MM BELT FED

1804 01 01 02 00 000 00DA

• Machining, Spring, Coiling machine and assy.

• 1) Chemical & Mechanical properties as per std. given drawing. 2) Dimensional inspection, for all dimensions given in the drawing & other parameter which are mentioned in relevant drawings.

RECEIVER AS PER DRG.NO.1804 01 01 01 01 000 00DA FOR LMG 7.62 X 51MM BELT FED

RECEIVER AS PER DRG.NO.1804 01 01 01 01 000 00DA FOR LMG 7.62 X 51MM BELT FED

1804 01 01 01 01 000 00DA

• Machining & Tig Laser welding

• 1) Chemical & Mechanical properties as per std. given drawing. 2) Dimensional inspection, for all dimensions given in the drawing & other parameter which are mentioned in relevant drawings.

GAS BLOCK & FORE SIGHT ASSEMBLY AS PER DRG.NO.1804 01 01 04 16 000 00DA REQUIRED FOR LMG 7.62MM X 51MM BELT FED

GAS BLOCK & FORE SIGHT ASSEMBLY AS PER DRG.NO.1804 01 01 04 16 000 00DA REQUIRED FOR LMG 7.62MM X 51MM BELT FED

1804 01 01 04 16 000 00DA

• Machining, Spring, Coiling machine and assy.

• 1) Chemical & Mechanical properties as per std. given drawing. 2) Dimensional inspection, for all dimensions given in the drawing & other parameter which are mentioned in relevant drawings.

ZINC STEARATE AS PER SPECIFICATION NO. JSS-6810-133-2021 (REV. NO. 3).

ZINC STEARATE AS PER SPECIFICATION NO. JSS-6810-133-2021 (REV. NO. 3).

• MSME

• ZINC STEARATE AS PER SPECIFICATION NO. JSS-6810-133-2021 (REV. NO. 3).

Cocking Handle Assembly for 9X19 mm Machine Pistol as per drawing no. 2101 01 02 05 12 000 00DB

Cocking Handle Assembly for 9X19 mm Machine Pistol as per drawing no. 2101 01 02 05 12 000 00DB

2101 01 02 05 12 000 00DB

• As per drawing

• As per drawing

Bolt Assembly for 9X19 mm Machine Pistol as per drawing no. 2101 01 02 01 06 000 00DA

Bolt Assembly for 9X19 mm Machine Pistol as per drawing no. 2101 01 02 01 06 000 00DA

2101 01 02 01 06 000 00DA

• As per drawing
• As per drawing

• As per drawing

Locking Rear Block for 9X19 mm Machine Pistol as per drawing no. 2101 01 02 00 00 002 00DA

Locking Rear Block for 9X19 mm Machine Pistol as per drawing no. 2101 01 02 00 00 002 00DA

2101 01 02 00 00 002 00DA

• As per drawing

• As per drawing

FLANGE TO DRG NO: 172.28.004-1/C

GOST 977 - 88

172.28.004-1/C

• AS PER VQC

• AS PER QAP