AMMUNITION CONTAINER BOX F2A PLYWOOD TO DRG NO. TRD-1612 (AMMUNITION CONTAINER BOX F2A DRG PT NO.ISV-557-A DC-36222-ADT.22/01/97.)SPECN:-IA-948(ak) DC-36868-A THE SHADE OF PAINTTO BE USED IS PAINT READY MIX. QUICK DRYING MATT.FOR GENERALPURPOSE OLIVE GREEN TO ISC-220 OF IS-5-2007(6TH REV)REAFFIRMED 2017 PAINT TO SPECN.IS 168-1993(THIRD REV.)(REAFFIRMED 2012) DC NO.3685-ME DATED 19-03-01.
Specification
AMMUNITION CONTAINER BOX F2A PLYWOOD TO DRG NO. TRD-1612 (AMMUNITION CONTAINER BOX F2A DRG PT NO.ISV-557-A DC-36222-ADT.22/01/97.)SPECN:-IA-948(ak) DC-36868-A THE SHADE OF PAINTTO BE USED IS PAINT READY MIX. QUICK DRYING MATT.FOR GENERALPURPOSE OLIVE GREEN TO ISC-220 OF IS-5-2007(6TH REV)REAFFIRMED 2017 PAINT TO SPECN.IS 168-1993(THIRD REV.)(REAFFIRMED 2012) DC NO.3685-ME DATED 19-03-01.
a) Raw material foam test from NABL lab.
b) In case of Sole selling agents/ dealers/ stockiest valid certificate from OEM.
c) General purpose engineering equipment’s like vernier,scale, tape ect. To measure dimensions.
64
3500
Number
2247
2019000129
Ordnance Clothing Factory Shahjahanpur
The General Manager,
Shahjahanpur
Shahjahanpur
Shahjahanpur, Uttar Pradesh
242001
FABRICATION OF ECAD PARACHUTE 8.5 M SD MADE WITH BLENDED FABRIC (67:33 ) POLYESTER AND COTTON AND 100% POLYESTER TAPE COMPLETE WITH PACK. WHERE SPECIAL MACHINE (DOUBLE NEEDLE STITCHING MACHINE, FOUR NEEDLE STITCHING MACHINE AND ZIGZAG MACHINE ARE REQUIRED ESSENTIALLY.)
SPECIFICATION :- AS PER SPECIFICATION NO. IND/TC/2694 WITH AMDT NO. 3 AND AS PER SAMPLE HELD WITH OCFS.
Specification
FABRICATION OF ECAD PARACHUTE 8.5 M SD MADE WITH BLENDED FABRIC (67:33 ) POLYESTER AND COTTON AND 100% POLYESTER TAPE COMPLETE WITH PACK. WHERE SPECIAL MACHINE (DOUBLE NEEDLE STITCHING MACHINE, FOUR NEEDLE STITCHING MACHINE AND ZIGZAG MACHINE ARE REQUIRED ESSENTIALLY.)
SPECIFICATION :- AS PER SPECIFICATION NO. IND/TC/2694 WITH AMDT NO. 3 AND AS PER SAMPLE HELD WITH OCFS.
1) Chemical & Mechanical properties as per std. given drawing /Specification.
2) Dimensional inspection for all dimension given in the drawing & other parameter which are mentioned in relevant drawing/specification.
FABRICATION OF SPECIAL MACHINE OPERATION AND RELATED OPERATION OF ECAD PARA
SPECIFICATION :- FABRICATION OF SPECIAL MACHINE OPERATION AND RELATED OPERATION i.e. MAKING OF VENT, PERIPHERY, TAPE MAKING, BASTING OF PERIPHERY, MAKING OF PERIPHERY, MAKING OF V TAPE, RIGGING LINE INSERTION, ZIG ZAGGING, MAKING OF D RING, FINAL FINISHING OF ECAD PARACHUTE 8.5 M SD. AS PER SPECIFICATION NO. IND/TC/2694 WITH AMENDMENT NO. 3 AND AS PER SAMPLE HELD WITH OCFS AND AS PER ANNEXURE ‘A’ MENTIONED FABRICATION WORK WILL BE EXECUTED AT OCFS PREMISES WITH RESPONSIBILITY OF FINAL INSPECTION THROUGH SQAE(GS), SHAHJAHANPUR.
Specification
FABRICATION OF SPECIAL MACHINE OPERATION AND RELATED OPERATION OF ECAD PARA
SPECIFICATION :- FABRICATION OF SPECIAL MACHINE OPERATION AND RELATED OPERATION i.e. MAKING OF VENT, PERIPHERY, TAPE MAKING, BASTING OF PERIPHERY, MAKING OF PERIPHERY, MAKING OF V TAPE, RIGGING LINE INSERTION, ZIG ZAGGING, MAKING OF D RING, FINAL FINISHING OF ECAD PARACHUTE 8.5 M SD. AS PER SPECIFICATION NO. IND/TC/2694 WITH AMENDMENT NO. 3 AND AS PER SAMPLE HELD WITH OCFS AND AS PER ANNEXURE ‘A’ MENTIONED FABRICATION WORK WILL BE EXECUTED AT OCFS PREMISES WITH RESPONSIBILITY OF FINAL INSPECTION THROUGH SQAE(GS), SHAHJAHANPUR.
FABRIC NYLON 66,93 GM ORANGE SHADE ISC NO.592 AS PER IS-5-2007 WIDTH 100 CM
Specification
SPECN-ADRDE/SPECN/2000/53(c)
1-COLOUR FASTNESS TO LIGHT OF FINISHED FABRIC SHALL BE 5 OR BETTER WHEN TESTED AS PER IS:2454
2-COLOUR FASTNESS TO WASHING OF FINISHED FABRIC SHALL BE 4 OR BETTER WHEN TESTED AS PER TEST 1 IS:687.
ST.ROD 42MM DIA TO SPECIFICATION IS-4432-1988 GD-13NI 13 CR3 WITH RESTRICTIONS S%=0.010MAX.,P%=0.015MAX.&(S+P)%=0.022MAX. GROUND & POLISHED BEFORE ROLLING.NORMALISED & PICKLED.RING GRIND TESTED TO ENSURE FORGING QUALITY.04-06METERS LONG.OTHER PARAMETERS AS PER QAI NO.QA-1/QAI/15 (FOR PISTON EXTENSION)
Specification
ST.ROD 42MM DIA TO SPECIFICATION IS-4432-1988 GD-13NI 13 CR3 WITH RESTRICTIONS S%=0.010MAX.,P%=0.015MAX.&(S+P)%=0.022MAX. GROUND & POLISHED BEFORE ROLLING.NORMALISED & PICKLED.RING GRIND TESTED TO ENSURE FORGING QUALITY.04-06METERS LONG.OTHER PARAMETERS AS PER QAI NO.QA-1/QAI/15 (FOR PISTON EXTENSION)
1) Chemical & Mechanical properties as per std. given in Specification.
2) Dimensional inspection for all dimension given in the drawing & other parameter which are mentioned in relevant drawing/specification.
OXYGEN FREE COPPER STRIP TO SPECN BS EN 1652 1997 DESIG CU OFCW 008A CONDITION H 065 UTS 240 N MM SQUARE AND ELONGATION 15 PERCENTAGE MINIMUM HAVING STRAIGHT LENGTH OF 2 DOT 5 TO 3 METER SIZE 92 PLUS MINUS 1 MM WIDE X 4 PLUS MINUS 0 DOT 1 MM THICK
Specification
OXYGEN FREE COPPER STRIP TO SPECN BS EN 1652 1997 DESIG CU OFCW 008A CONDITION H 065 UTS 240 N MM SQUARE AND ELONGATION 15 PERCENTAGE MINIMUM HAVING STRAIGHT LENGTH OF 2 DOT 5 TO 3 METER SIZE 92 PLUS MINUS 1 MM WIDE X 4 PLUS MINUS 0 DOT 1 MM THICK
OXYGEN FREE COPPER STRIP TO SPECN BS EN 1652 1997 DESIG CU OFCW 008A CONDITION H 065 UTS 240 N MM SQUARE AND ELONGATION 15 PERCENTAGE MINIMUM HAVING STRAIGHT LENGTH OF 2 DOT 5 TO 3 METER SIZE 92 PLUS MINUS 1 MM WIDE X 4 PLUS MINUS 0 DOT 1 MM THICK
OXYGEN FREE COPPER STRIP TO SPECN BS EN 1652 1997 DESIG CU OFCW 008A CONDITION H 065 UTS 240 N/MM SQUARE AND ELONGATION 15 PERCENTAGE MINIMUM HAVING STRAIGHT LENGTH OF 2 DOT 5 TO 3 METER SIZE 92 PLUS MINUS 1 MM WIDE X 4 PLUS MINUS 0 DOT 1 MM THICK
