1761
HVF/TE0102190209/2019-20/TA/CBOI/SD-OTE dt 03/02/2020
Heavy Vehicle Factory
The Sr.General Manager,
Avadi
Avadi
Avadi, Tamil Nadu
600054
Name
Code
Quantity
Approx Value
Select
SEAL AND SPRING SET TO 6206411113
Physical Verification needed
Description
SEAL & SPRING SET TO DRG NO. CQA(HV)5.51.000
Specification
SEAL & SPRING SET TO DRG NO. CQA(HV)5.51.000
Drawing no.
CQA(HV)5.51.000
Testing / Inspection Facility
62
8209
Number
HOSE CONNECTION TO 6201031316
Physical Verification needed
Description
HOSE CONNECTION TO DRG NO. CQA(HV)5.31.038
Specification
HOSE CONNECTION TO DRG NO. CQA(HV)5.31.038
Drawing no.
CQA(HV)5.31.038
Testing / Inspection Facility
62
106
Number
PIPE LINE TO 6206421369
Physical Verification needed
Description
PIPE LINE TO DRG NO. CQA(HV)5.66.046
Specification
PIPE LINE TO DRG NO. CQA(HV)5.66.046
Drawing no.
CQA(HV)5.66.046
Testing / Inspection Facility
62
135
Number
BLOWER TO 6206604019
Physical Verification needed
Description
BLOWER TO DRG NO. 434.87.003CB
Specification
BLOWER TO DRG NO. 434.87.003CB
Testing / Inspection Facility
62
9
Number
PRE HEATER ASSY TO 6201036013
Physical Verification needed
Description
PRE HEATER ASSY TO DRG NO. 188.36.001CBCB
Specification
PRE HEATER ASSY TO DRG NO. 188.36.001CBCB
Drawing no.
188.36.001CBCB
Testing / Inspection Facility
62
34
Number
DISTRIBUTION PANEL R H ASSY TO 6206503001
Physical Verification needed
Description
DISTRIBUTION PANEL R H ASSY TO DRG NO.172.71.012CB-9CB
Specification
DISTRIBUTION PANEL R H ASSY TO DRG NO.172.71.012CB-9CB
Drawing no.
172.71.012CB-9CB
Testing / Inspection Facility
62
8
Number
HINGE TO 3806102369
Physical Verification needed
Description
175.02.352-2/C
Specification
175.02.352-2/C
Drawing no.
175.02.352-2/C
Testing / Inspection Facility
38
104
Number
CASTING HOUSING TO LF 3801023045
Physical Verification needed
Description
CASTING HOUSING TO DRG NO: 176.23.001-1/C
Specification
GOST 977-88
Drawing no.
176.23.001-1/C
Testing / Inspection Facility
38
64
Number
BODY DELIVERY PUMP CASTING TO LF 3806407032
Physical Verification needed
Description
BODY DELIVERY PUMP(CASTING) TO DRG NO: 172.46.050-1/C
Specification
GOST 1412-85
Drawing no.
172.46.050-1/C
Testing / Inspection Facility
38
96
Number
1762
TE NO 190401P2FO
Gun Carriage Factory
The General Manager,
Jabalpur
Jabalpur
Jabalpur,Madhya Pradesh
482011
Name
Code
Quantity
Approx Value
Select
9070100092 FRONT AXLE ASSY IAN 39A
Physical Verification needed
Description
9070100092 FRONT AXLE ASSY. IAN 39A
Specification
9070100092 FRONT AXLE ASSY. IAN 39A
Testing / Inspection Facility
90
26
Number
SEAT POT ASSY TO LF NO 6206214238
Physical Verification needed
Description
SEAT POT ASSY
Specification
AS PER DRAWING
Drawing no.
172.65.024CB-3CB
Manufacturing Technology
AS PER VQC ATTACHED
-
-
-
-
Testing / Inspection Facility
AS PER VQC ATTACHED
-
-
-
-
62
35
Number
SMOKE GENERATING SYSTEM TO 6206310002
Physical Verification needed
Description
SMOKE GENERATING SYSTEM TO DRG NO. 175.37CB-1
Specification
SMOKE GENERATING SYSTEM TO DRG NO. 175.37CB-1
Testing / Inspection Facility
62
8
Number
1763
190137 TUNGSTEN POWDER
High Energy Projectile Factory
The Cheif General Manager
Trichy
Trichy
Trichy, Tamil Nadu
620025
Name
Code
Quantity
Approx Value
Select
PLASTIC CONTAINER FOR AMK 339
Physical Verification needed
Description
PLASTIC CONTAINER FOR AMK 339 DRG NO.H AMK125 1 126 AS PER LATEST REVSION
Specification
As per enclosed MI
Drawing no.
DRG NO.H AMK125 1 126 AS PER LATEST REVSIO
Testing / Inspection Facility
14
2930
Number
MOUNTING OF SWITCH ASSY TO 6206501104
Physical Verification needed
Description
MOUNTING OF SWITCH ASSY TO DRG 176.70.072CB-A
Specification
MOUNTING OF SWITCH ASSY TO DRG 176.70.072CB-A
Drawing no.
176.70.072CB-A
Testing / Inspection Facility
62
27
Number
DISK DRIVING ASSY TO 6206402002
Description
DISK DRIVING ASSY TO DRG NO.175.41.007CB
Specification
DISK DRIVING ASSY TO DRG NO.175.41.007CB
Testing / Inspection Facility
62
131
Number
PACKING RING
Description
DRG NO. 432.40.106-2
Specification
DRG NO. 432.40.106-2
Testing / Inspection Facility
62
882
Number
1764
O113-19
Ordnance Factory Dehradun
The General Manager,
Dehra Dun
Dehra Dun
Uttaranchal
248008
Name
Code
Quantity
Approx Value
Select
LRF LASER RANGE FINDER AS PER SPEC 120
Physical Verification needed
Description
LRF LASER RANGE FINDER AS PER SPEC 120
Specification
LRF LASER RANGE FINDER AS PER SPEC 120
Testing / Inspection Facility
74
5
Number
UNCOOLED TI EINGINE WITH OLED INCLUDING DRIVER BOARD WITH RECORDING FACILITY AS PER SPEC 114
Physical Verification needed
Description
UNCOOLED TI EINGINE WITH OLED INCLUDING DRIVER BOARD WITH RECORDING FACILITY AS PER SPEC 114
Specification
AS PER SPECIFICATION
Testing / Inspection Facility
74
10
Number
COBALT POWDR
Physical Verification needed
Specification
CQAM-58 -2017
Testing / Inspection Facility
01
3348
Kilogram
GUN LOCK TO 6206212002
Physical Verification needed
Description
GUN LOCK TO DRG NO. 175.29.001CB-2
Specification
GUN LOCK TO DRG NO. 175.29.001CB-2
Drawing no.
175.29.001CB-2
Testing / Inspection Facility
62
67
Number
1765
3193000956
Small Arms Factory
The General Manager,
Kanpur
Kanpur
Kanpur, Uttar Pradesh
208009
Name
Code
Quantity
Approx Value
Select
Hand Guard for LMG 7 62 51mm Belt Fed as per drawing no1804 01 00 00 00 001 00DA and 1804 01 00 00 00 002 00DA
Physical Verification needed
Description
Hand Guard for LMG 7.62X51mm Belt Fed as per drawing no. 1804 01 00 00 00 001 00DA and 1804 01 00 00 00 002 00DA.
Specification
Hand Guard for LMG 7.62X51mm Belt Fed as per drawing no. 1804 01 00 00 00 001 00DA and 1804 01 00 00 00 002 00DA.
Drawing no.
1804 01 00 00 00 001 00DA and 1804 01 00 00 00 002 00DA.
Testing / Inspection Facility
Chemical & Mechanical properties as per std. given in drawing.
Dimensional inspection, for all dimensions given in the parameter which are mentioned in relevant drg
70
10
Number
1766
110190301
Ordnance Parachute Factory
The General Manager,
Kanpur
Kanpur
Kanpur, Uttar Pradesh
208004
Name
Code
Quantity
Approx Value
Select
Parachute Opening Release Device PPKU
Description
Parachute Opening Release Device (PPK-U)
Specification
ADRDE/CFF/SAFETY-PPK/20/01/ SPCN(a), Drawing no. ADRDE/PAS/2005/9 (f) of Part no. ADRDE/PAS/2005/9A-9
Manufacturing Technology
As per Drawing/Specification
Testing / Inspection Facility
As per Drawing/Specification
2110025097
35
Number
CHAIN ASSY TO 6206890344
Description
CHAIN ASSY L=597 MM CHAIN PR-12.7-1820-1 GOST:13568-75 TO DRG NO. HVF.28.102SB-1(M1)
Specification
CHAIN ASSY L=597 MM CHAIN PR-12.7-1820-1 GOST:13568-75 TO DRG NO. HVF.28.102SB-1(M1)
Drawing no.
HVF.28.102SB-1(M1)
Testing / Inspection Facility
62
82
Number
DISC WITH EXTERNAL TEETH
Description
DISC WITH EXTERNAL TEETH / 432.40.074-1
Specification
DISC WITH EXTERNAL TEETH / 432.40.074-1
Testing / Inspection Facility
62
1821
Number
Moulded Plate Type II with Curved Plate
Description
Moulded Plate Type II with Curved Plate
Specification
1. DRG. NO. ADRDE/1310(b) Moulded Plate type-II , qty. 01 Nos.
2. ADRDE/1311(c) Curved plate (Metallic arc support) qty. 01 Nos.
3. Rivets: qty. 07 Nos. Confirming to Drg. NO. ADRDE/1311 (c)
Manufacturing Technology
As per Drawing/Specification
Testing / Inspection Facility
As per Drawing/Specification
2010071034
62
Set
Nut plain round lock fore sight DRG No 0204 03 04 00 01 009 00DA for JVPC 5 56mm through MIM route
Physical Verification needed
Description
Nut plain round lock fore sight DRG No 0204 03 04 00 01 009 00DA for JVPC 5 56mm through MIM route
Specification
Nut plain round lock fore sight DRG No 0204 03 04 00 01 009 00DA for JVPC 5 56mm through MIM route
Drawing no.
DRG No 0204 03 04 00 01 009 00DA
Testing / Inspection Facility
Chemical and mechanical properties as per std. given drawing.
Dimensional inspection, for all dimensions given in the drawing a other parameter which are mentioned in relevant drawing
70
766
Number
Extractor JVPC 5 56MM thorugh MIM route DRG No 0204 03 04 00 05 002 00DA
Physical Verification needed
Description
Extractor JVPC 5 56MM thorugh MIM route DRG No 0204 03 04 00 05 002 00DA
Specification
Extractor JVPC 5 56MM thorugh MIM route DRG No 0204 03 04 00 05 002 00DA
Drawing no.
DRG No 0204 03 04 00 05 002 00DA
Testing / Inspection Facility
Chemical and mechanical properties as per std. given drawing.
- Dimensional inspection, for all dimensions given in the drawing a other parameter which are mentioned in relevant drawing
70
1055
Number
Stud Cocking Handle DRG No 0204 03 04 00 01 013 00DA for JVPC 5 56mm through MIM Route
Physical Verification needed
Description
Stud Cocking Handle DRG No 0204 03 04 00 01 013 00DA for JVPC 5 56mm through MIM Route
Specification
Stud Cocking Handle DRG No 0204 03 04 00 01 013 00DA for JVPC 5 56mm through MIM Route
Drawing no.
DRG No 0204 03 04 00 01 013 00DA
Manufacturing Technology
Chemical and mechanical properties as per std. given drawing.
Testing / Inspection Facility
Dimensional inspection, for all dimensions given in the drawing a other parameter which are mentioned in relevant drawing
70
780
Number
Screw Axis Rear Sight DRG No0204 03 04 00 01 004 00DA for JVPC 5 56mm through MIM Route
Physical Verification needed
Description
Screw Axis Rear Sight DRG No0204 03 04 00 01 004 00DA for JVPC 5 56mm through MIM Route
Specification
Screw Axis Rear Sight DRG No0204 03 04 00 01 004 00DA for JVPC 5 56mm through MIM Route
Drawing no.
DRG No0204 03 04 00 01 004 00DA
Manufacturing Technology
Chemical and mechanical properties as per std. given drawing.
Testing / Inspection Facility
Dimensional inspection, for all dimensions given in the drawing a other parameter which are mentioned in relevant drawing
70
897
Number
1767
2019000129
Ordnance Clothing Factory Shahjahanpur
The General Manager,
Shahjahanpur
Shahjahanpur
Shahjahanpur, Uttar Pradesh
242001
Name
Code
Quantity
Approx Value
Select
Eyelet Alum Alloy No W Washer
Description
EYELET ALUM ALLOY NO. WITH WASHER, NS-3 ALLOY CHEMICALLY PASSIVATED NO. 24.
SPECNS:- IS:4084-1978 (FIRST REVISION) REAFFIRMED 2013, AMD-2
Specification
EYELET ALUM ALLOY NO. WITH WASHER, NS-3 ALLOY CHEMICALLY PASSIVATED NO. 24.
SPECNS:- IS:4084-1978 (FIRST REVISION) REAFFIRMED 2013, AMD-2
Manufacturing Technology
as per attached list (Manufacturing Technology Files )
Testing / Inspection Facility
as per attached list (Testing / Inspection Facility Files )
21
1463247
Set
1768
MNF/BAFFLE/OFAJ
Ordnance Factory Ambajhari
The Sr.General Manager,
Ambajhari
Ambajhari
Maharashtra
440021
1769
128MMETT20001880
Ordnance Factory Tiruchirapalli
The General Manager,
Tiruchirapalli
Tiruchirapalli
Tamil Nadu
620016
Name
Code
Quantity
Approx Value
Select
BEARING BALL 4 PNT WIRE D350 P NO 00074470N AND SUPPLY AS PER SPECIFICATION MVE 200350 FOR TRAVERSE BEARING OF SRCG
Physical Verification needed
Description
BEARING BALL 4 PNT WIRE D350 P NO 00074470N AND SUPPLY AS PER SPECIFICATION MVE 200350 FOR TRAVERSE BEARING OF SRCG
Specification
BEARING BALL 4 PNT WIRE D350 P NO 00074470N AND SUPPLY AS PER SPECIFICATION MVE 200350 FOR TRAVERSE BEARING OF SRCG
Testing / Inspection Facility
74
172
Number
9077100046 COVER MUZZLE TO DRG NASK
Physical Verification needed
Description
9077100046 COVER MUZZLE TO DRG.NO.NASK 938/10
Specification
9077100046 COVER MUZZLE TO DRG.NO.NASK 938/10
Testing / Inspection Facility
90
1379
Number
9077100048 COVER LR CR MR CR TO DRG NO NASK 939 22 FRP GLASS RED COLOUR
Physical Verification needed
Description
9077100048 COVER LR CR & MR CR TO DRG.NO.NASK 939/22(FRP GLASS RED COLOUR)
Specification
9077100048 COVER LR CR & MR CR TO DRG.NO.NASK 939/22(FRP GLASS RED COLOUR)
Drawing no.
DRG.NO.NASK 939/22
Testing / Inspection Facility
90
5240
Number
MULTI PURPOSE SLINGING DEVICE CHPU B SB TO 6206791661
Physical Verification needed
Description
MULTI PURPOSE SLINGING DEVICE (CHPU-B SB) TO DRG NO. CQA(HV)5.95.007
Specification
MULTI PURPOSE SLINGING DEVICE (CHPU-B SB) / CQA(HV)5.95.007
Drawing no.
CQA(HV)5.95.007
Testing / Inspection Facility
62
88
Number
1770
PV/OFCH/ADV REGD/JAN-20/69
Ordnance Factory Chanda
The Cheif General Manager
Chanda
Chanda
Maharashtra
442501
Name
Code
Quantity
Approx Value
Select
6570250315 BOTTOM PKG SHET DET NO 02
Description
BOTTOM PKG. SHEET DET.NO 2 QTY 1 NOS. CHARGE HOLDING TRAY DET NO 3 QTY 3 NOS. TOP PKG. SHEET DET NO 4 QTY = 01 NO MATL-EXPANDED LINKED POLYETHYLENE FOAM AS PER DRG NO.HE/CAST-078 & SPEC.NO.IND/ME/1023(PROV) DC 3857 ME.
Specification
DRG NO.HE/CAST-078 & SPEC.NO.IND/ME/1023(PROV) DC 3857 ME.
Drawing no.
DRG NO.HE/CAST-078 & SPEC.NO.IND/ME/1023(PROV) DC 3857 ME.
Manufacturing Technology
Compression Machine,
Moulding Machine,
Cutting , Sizing.
Testing / Inspection Facility
Density, Tensile strength,
Water absorption, Elongation %,
Tear Strength,
Compression strength etc
And NABL –test report as per IND/ME/1023 (prov).
65
1000
Set
1771
OFBA/196034
Ordnance Factory Bhandara
The Cheif General Manager
Bhandara
Bhandara
Maharashtra
441906
Name
Code
Quantity
Approx Value
Select
Pyro Cartridge Holder Pechora
Description
PYRO CARTRIDGE HOLDER FOR EVALUATION OF PECHORA(BPC 5B-84) PROPELLANT CONFIRMING TO DRG.NO. NAI(J)SK-220.
Specification
PYRO CARTRIDGE HOLDER FOR EVALUATION OF PECHORA(BPC 5B-84) PROPELLANT CONFIRMING TO DRG.NO. NAI(J)SK-220.
Drawing no.
DRG.NO. NAI(J)SK-220.
Testing / Inspection Facility
71
9
Number
Basic Lead Stearate
Description
JSS 6810 -145:2017( Revision No 2)
Specification
JSS 6810 -145:2017( Revision No 2)
Testing / Inspection Facility
JSS 6810 -145:2017( Revision No 2)
10
2020
Kilogram
1772
ORDFYS/MSF/CPP/VENDOR REGISTRATION/18(1)/PV-1 dtd. 03-01-2018
Metal and Steel Factory
The General Manager,
Ishapore
Ishapore
Ishapur, West Bengal
743144
Name
Code
Quantity
Approx Value
Select
HOT ROLLED HEAT TREATED PEELED OR MACHINED AND UT PASSED STEEL ROD
Description
HOT ROLLED HEAT TREATED PEELED/MACHINED & UT PASSED STEEL ROD TO SIZE 71+/-0.1MM DIA X 2-3 MTR LENGTH MAINTAINING ECCENTRICITY/BEND NOT MORE THAN 0.5 MM IN 1000 MM LENGTH TO SPECN GOST B 19032-73 STEEL GRADE II IOA FOR MAKING OF STEEL BLANKS FOR 30MM CARTRIDGE CASES AS PER MSF SCOPE OF WORK.
Specification
HOT ROLLED HEAT TREATED PEELED/MACHINED & UT PASSED STEEL ROD TO SIZE 71+/-0.1MM DIA X 2-3 MTR LENGTH MAINTAINING ECCENTRICITY/BEND NOT MORE THAN 0.5 MM IN 1000 MM LENGTH TO SPECN GOST B 19032-73 STEEL GRADE II IOA FOR MAKING OF STEEL BLANKS FOR 30MM CARTRIDGE CASES AS PER MSF SCOPE OF WORK.
Testing / Inspection Facility
0133000055
500
Metric tonne(1000kg)
STEEL BLOOMS SIZE 300MM X 300 MM RCS OF DIFFERENT LENGTH AND WEIGHT
Description
STEEL BLOOMS SIZE 300 MM X 300 MM (RCS) AS PER DETAILS SCOPE OF SUPPLY AND RAILWAY SPECIFICATION NO. IRS-R-16/95 WITH CORRIGENDUM 1 TO 3.
Specification
STEEL BLOOMS SIZE 300 MM X 300 MM (RCS) AS PER DETAILS SCOPE OF SUPPLY AND RAILWAY SPECIFICATION NO. IRS-R-16/95 WITH CORRIGENDUM 1 TO 3.
Manufacturing Technology
As per the Scope of the Supply
Testing / Inspection Facility
As per the Scope of the Supply
4415059245
8000
Metric tonne(1000kg)
BLOCK GAS IN FINISH CONDITION FOR MAG
Description
BLOCK GAS IN FINISH CONDITION AS PER D.S.CAT NO;1005-006815 FOR MAG 7.62MM (BORE SIZE DIA 23.021 TO 23.037MM)
Specification
BLOCK GAS IN FINISH CONDITION AS PER D.S.CAT NO;1005-006815 FOR MAG 7.62MM (BORE SIZE DIA 23.021 TO 23.037MM)
Drawing no.
D.S.CAT NO;1005-006815
Testing / Inspection Facility
1) Chemical & Mechanical properties as per std. given drawing.
2) Dimensional inspection, for all dimensions given in the drawings & other parameter which are mentioned in relevant drawings.
70
700
Number
BRASS STRIP TO SPECIFICATION BS EN 1652 TO 1998 DESIGN CuZn37 MATERIAL CONDITION R550 WITH UTS 55 TO 65 KGF PER MM2 SIZE 0 POINT 6 THICK 12 MM WIDE IN COIL FORM
Description
BRASS STRIP TO SPECIFICATION BS EN 1652-1998 DESIGN CuZn37 MATERIAL CONDITION R550 WITH UTS 55-65 KGF/MM2,ELONGATION 4% MIN. TO SIZE 0.6 - 0.06MM THICK X 12 MM WIDE IN COIL FORM (REF.DRG.NO.BW8.388.004 FOR CLIP)
Specification
BRASS STRIP TO SPECIFICATION BS EN 1652-1998 DESIGN CuZn37 MATERIAL CONDITION R550 WITH UTS 55-65 KGF/MM2,ELONGATION 4% MIN. TO SIZE 0.6 - 0.06MM THICK X 12 MM WIDE IN COIL FORM (REF.DRG.NO.BW8.388.004 FOR CLIP)
Testing / Inspection Facility
00
AS PER REQUIREMENT
Kilogram
CUSHION SEAT VEHICULAR D6PTA7213 TO DRG NO 2540 002309
Physical Verification needed
Description
CUSHION SEAT VEHICULAR (D6PTA7213) TO DRG.NO.2540-002309
Specification
CUSHION SEAT VEHICULAR (D6PTA7213) TO DRG.NO.2540-002309
Testing / Inspection Facility
90
2064
Number
ROLL TOOL AND ACCESSARIS 1A TO DRG NO 5140 000059
Physical Verification needed
Description
ROLL TOOL & ACCESSARIS 1A.TO DRG.NO.5140-000059
Specification
ROLL TOOL & ACCESSARIS 1A.TO DRG.NO.5140-000059
Testing / Inspection Facility
90
1251
Number
REAR AXLE ASSEMBLY TO DRG NO 2011598 FOR 40 MM A AGUN L 70
Physical Verification needed
Description
REAR AXLE ASSEMBLY TO DRG. NO. 2011598 FOR 40 MM A.A. GUN
L/70
Specification
REAR AXLE ASSEMBLY TO DRG. NO. 2011598 FOR 40 MM A.A. GUN
L/70
Testing / Inspection Facility
90
23
Number
CONVERSION OF ALUMINIUM ALLOY 33 POINT 5
Description
CONVERSION OF ALUMINIUM ALLOY 33.5 +/- 0.3 MM DIA TO SPECN. RDE – 40 IN WP CONDITION IN RUNNING LENGTH OF 2 TO 3 MTRS INTO SEMI-FINISHED CONTAINER CARTRIDGE TO OFAJ DRG. NO. FS-2956 D.
Specification
CONVERSION OF ALUMINIUM ALLOY 33.5 +/- 0.3 MM DIA TO SPECN. RDE – 40 IN WP CONDITION IN RUNNING LENGTH OF 2 TO 3 MTRS INTO SEMI-FINISHED CONTAINER CARTRIDGE TO OFAJ DRG. NO. FS-2956 D.
Testing / Inspection Facility
00
AS PER REQUIREMENT
Whole job
OBJECTIVE GLASS 60MM FIXED FOCUS AS PER SPEC 115
Physical Verification needed
Description
AS PER SPECIFICATION DESCRIPTION
Specification
AS PER SPECIFICATION DESCRIPTION
Testing / Inspection Facility
74
10
Number
Slider Breech Block DRG No 0204 03 04 00 00 001 00DA for JVPC 5 56 mm MIM Route
Description
Slider Breech Block DRG No 0204 03 04 00 00 001 00DA for JVPC 5 56 mm MIM Route
Specification
Slider Breech Block DRG No 0204 03 04 00 00 001 00DA for JVPC 5 56 mm MIM Route
Drawing no.
DRG No 0204 03 04 00 00 001 00DA for JVPC 5 56 mm MIM Route
Manufacturing Technology
MIM ROUTE
Chemical and mechanical properties as per std. given drawing.
Testing / Inspection Facility
Chemical and mechanical properties as per std. given drawing.
Dimensional inspection, for all dimensions given in the drawing and other parameter which are mentioned in relevant drawing.
70
580
Number
Stud change lever DRG No 0204 03 04 02 15 001 00DA for JVPC 5 56mm through MIM route
Description
Stud change lever DRG No 0204 03 04 02 15 001 00DA for JVPC 5 56mm through MIM route
Specification
Stud change lever DRG No 0204 03 04 02 15 001 00DA for JVPC 5 56mm through MIM route
Drawing no.
DRG No 0204 03 04 02 15 001 00DA for JVPC 5 56mm through MIM route
Manufacturing Technology
Chemical and mechanical properties as per std. given drawing.
Testing / Inspection Facility
Dimensional inspection, for all dimensions given in the drawing a other parameter which are mentioned in relevant drawing
70
1365
Number
BODY AS PER DRG NO BL8020662
Physical Verification needed
Description
BODY AS PER DRG. NO. BL8020662
Specification
BODY AS PER DRG. NO. BL8020662
Drawing no.
DRG. NO. BL8020662
Testing / Inspection Facility
74
100
Number
ROLLER AS PER DRG NO BL8318769
Physical Verification needed
Description
ROLLER AS PER DRG. NO. BL8318769
Specification
ROLLER AS PER DRG. NO. BL8318769
Drawing no.
DRG. NO. BL8318769
Testing / Inspection Facility
74
100
Number
1773
OFK/2019/05/IV/3
Ordnance Factory Khamaria
The Cheif General Manager
Khamaria
Khamaria
Madhya Pradesh
482005
Name
Code
Quantity
Approx Value
Select
DELAY TUBE EMPTY FOR DET 36M 7SEC LF 9911358772
Description
DELAY TUBE (EMPTY) TO DRG.IQX 922 DC 36852-A DT.23/09/2002 FOR DETONATOR 36M 7 SEC
Specification
DELAY TUBE (EMPTY) TO DRG.IQX 922 DC 36852-A DT.23/09/2002 FOR DETONATOR 36M 7 SEC
Testing / Inspection Facility
99
11025
Number
CONTROL PANEL ASSEMBLY DRAWING TO 6206811186
Physical Verification needed
Description
CONTROL PANEL ASSEMBLY DRAWING TO DRG NO. 902.02.000CB
Specification
CONTROL PANEL ASSEMBLY DRAWING TO DRG NO. 902.02.000CB
Testing / Inspection Facility
62
48
Number
DISTANCE SLEEVE
Description
DISTANCE SLEEVE
Specification
DISTANCE SLEEVE 172.25.071B
Testing / Inspection Facility
62
100
Number
GEAR
Physical Verification needed
Description
GEAR 172.28.015-1A
Specification
AS PER VQC ATTACHED
Drawing no.
172.28.015-1A
Testing / Inspection Facility
62
68
Number
BOOSTER TO 6206604221
Physical Verification needed
Description
BOOSTER TO DRG NO. 172.87.134CB-ACB
Specification
BOOSTER TO DRG NO. 172.87.134CB-ACB
Drawing no.
172.87.134CB-ACB
Testing / Inspection Facility
62
22
Number
CLUTCH SHAFT ASSY TO 6201063014
Physical Verification needed
Description
CLUTCH SHAFT ASSY TO DRG NO. 188.63.012CBCB
Specification
CLUTCH SHAFT ASSY TO DRG NO. 188.63.012CBCB
Drawing no.
188.63.012CBCB
Testing / Inspection Facility
62
100
Number
DISTRIBUTION PANNEL ASSY LH TO 6206002002
Physical Verification needed
Description
DISTRIBUTION PANNEL ASSY LH TO DRG NO. 172.71.013CB-6
Specification
DISTRIBUTION PANNEL ASSY LH TO DRG NO. 172.71.013CB-6
Drawing no.
172.71.013CB-6
Testing / Inspection Facility
62
16
Number
Shoulder Adjustable Buckle ACPB CT
Description
Shoulder Adjustable Buckle A.C.P.B./C.T.
Specification
Specn No. ADRDE/194(a)
Manufacturing Technology
As per Specification/Drawing
Testing / Inspection Facility
As per Specification/Drawing
2110080015
100
Number
PIEZO ELECTRIC GENERATOR ASSY LF 9911357853
Description
PIEZO ELECTRIC GENERATOR ASSY. TO DRG .NO. TRD 2-2-2203.
Specification
PIEZO ELECTRIC GENERATOR ASSY. TO DRG .NO. TRD 2-2-2203.
Drawing no.
PIEZO ELECTRIC GENERATOR ASSY. TO DRG .NO. TRD 2-2-2203.
Testing / Inspection Facility
99
10231
Number
CONVERSION OF 155MM M107 FORGED SHELL INTO SEMI FINISHED SHELL AS PER DRG NO SM 686E AND SCOPE OF WORK AS PER ANNEXURE A
Description
CONVERSION OF 155MM M107 FORGED SHELL INTO SEMI FINISHED SHELL AS PER DRG NO SM 686E AND SCOPE OF WORK AS PER ANNEXURE A
Specification
CONVERSION OF 155MM M107 FORGED SHELL INTO SEMI FINISHED SHELL AS PER DRG NO SM 686E AND SCOPE OF WORK AS PER ANNEXURE A
Testing / Inspection Facility
00
52710
Whole job
CONVERSION OF 155 ERFB FORGED SHELL INTO SEMI FINISHED SHELL AS PER DRG NO SM 938D AND SCOPE OF WORK AS PER ANNEXURE A
Description
CONVERSION OF 155 ERFB FORGED SHELL INTO SEMI FINISHED SHELL AS PER DRG NO SM 938D AND SCOPE OF WORK AS PER ANNEXURE A
Specification
CONVERSION OF 155 ERFB FORGED SHELL INTO SEMI FINISHED SHELL AS PER DRG NO SM 938D AND SCOPE OF WORK AS PER ANNEXURE A
Testing / Inspection Facility
00
50000
Whole job
1774
OFBH/2019/VR/0013
Ordnance Factory Bhusawal
The General Manager,
Bhusawal
Bhusawal
Maharashtra
425203
Name
Code
Quantity
Approx Value
Select
HANDLE AND HANDLE CLIP SUB ASSEMBLY
Description
REQUIRED FOR METALLIC CONTAINER FOR TU33E
Specification
AS PER DRAWING NUMBER OFBH/SK/1535
Manufacturing Technology
SHEARING, FORMING, DRILLING, PUNCHING
Testing / Inspection Facility
01
10000
Number
1775
EOI13/PV/M1
Ordnance Factory Itarsi
The Cheif General Manager
Itarsi
Itarsi
Madhya Pradesh
461122
Name
Code
Quantity
Approx Value
Select
GUANIDINE NITRATE
Physical Verification needed
Description
GUANIDINE NITRATE TO SPECN.JSS 6810-95:2018 (REV.NO 04)DC NO -6135- ME DT 10-05-2021.
Specification
GUANIDINE NITRATE TO SPECN.JSS 6810-95:2018 (REV.NO 04)DC NO -6135- ME DT 10-05-2021.
Manufacturing Technology
Guanidine Nitrate is manufactured by heating Dicyandiamide confirming to IND/ME/878(Prov) with two equitant of Ammonium Nitrate confirming to IND/ME/86 degree C at 160 degree C.
Testing / Inspection Facility
Inspecti0on facility : Guanidine Nitrate and the packages in which it is packed shall be subject to inspection by and to the approval of the Quality Assurance Officer/Quality Assurance Authority
Testing facility/requirements : Samples taken from any portion of batch/lot/consignment of material shall confirm to the following test requirements
Sl no. Characteristics Passing standard
1. Physical form Crystalline
2. Bulk Density, g/ml Min. 0.70
Max. 0.90
3. Melting point, oC Min. 210
Max. 214
4 Water soluble at
30 oC, % by mass Min. 15.10
5. Guanidine Nitrate
, % by mass Min. 99
6. Ammonium Nitrate,
% by mass Max. 0.48
7. Urea Nil
8. Residue on ignition
, % by mass Max. 0.02
9. Moisture content
, % by mass Max. 0.48
10. Matter insoluble in
water at 20 oC, %
by mass Max . 0.50
11. Malamine, % by
mass Max 0.10
12. pH of water extract Min. 5
Max. 6
1001256000
100174.60
Kilogram
GEN 3 18MM AUTOGATED IMAGE INTENSIFIERS TUBE WITH EMI PROTECTION DRG NO MCT 3550
Physical Verification needed
Description
GEN 3 18MM AUTOGATED IMAGE INTENSIFIERS TUBE WITH EMI PROTECTION DRG NO MCT 3550
Specification
AS PER SPECIFICATION
Testing / Inspection Facility
74
10
Number
ALUMINIUM ALLOY ROD 45MM DIA AS PER IS 733 1983 DESIGNATION 24345 CONDITION WP
Physical Verification needed
Description
ALUMINIUM ALLOY ROD 45MM(1-3/4”) DIA,
AS PER IS: 733-1983, DESIGNATION -24345,
CONDITION-WP
Specification
ALUMINIUM ALLOY ROD 45MM(1-3/4”) DIA,
AS PER IS: 733-1983, DESIGNATION -24345,
CONDITION-WP
Testing / Inspection Facility
06
907
Kilogram
N M BRASS ROD 7 OBLIQUE 8 DIA TO SPECN I S 319 1989 GDE 1 HB Fe CONTENTS SHOULD NOT BE MORE THAN ZERO POINT ZERO FIVE PERCENT
Physical Verification needed
Description
N.M BRASS ROD 7/8” DIA
TO SPECN I.S: 319-1989/GDE-1 HB
(Fe CONTENTS SHOULD NOT BE MORE THAN 0.05%)
Specification
N.M BRASS ROD 7/8” DIA
TO SPECN I.S: 319-1989/GDE-1 HB
(Fe CONTENTS SHOULD NOT BE MORE THAN 0.05%)
Testing / Inspection Facility
07
511
Kilogram
1776
111MMETT19001520
Ordnance Factory Ambernath
The Sr.General Manager,
Ambarnath
Ambarnath
Maharashtra
421502
Name
Code
Quantity
Approx Value
Select
GRAPHITE BLOCK
Description
GRAPHITE BLOCK OF SIZE 550 + 5.0-0.0MM X 200 + 5.0-0.0MM X 325 + 5.0-0.0MM AS PER SCOPE OF SUPPLY ENCLOSED.
Specification
REFER FILE UPLOADED
Testing / Inspection Facility
20
36
Number
ALUMINIUM ALLOY ROD 50MM DIA AS PER IS 733 1983 DESIGNATION 24345 CONDITION WP
Physical Verification needed
Description
ALUMINIUM ALLOY ROD 50MM DIA,
AS PER IS: 733-1983, DESIGNATION -24345, CONDITION-WP
Specification
ALUMINIUM ALLOY ROD 50MM DIA,
AS PER IS: 733-1983, DESIGNATION -24345, CONDITION-WP
Manufacturing Technology
AS PER I.S. SPECIFICATION
Testing / Inspection Facility
AS PER I.S. SPECIFICATION
06
3877
Kilogram
BRASS ROD 9 OBLIQUE 16 INCH DIA TO SPEC IS 319 2007 GDE 1 HB HALF HARD
Physical Verification needed
Description
BRASS ROD 9/16 INCH DIA,
TO SPEC -IS:319-2007 GDE-1 HB (HALF HARD)
Specification
BRASS ROD 9/16 INCH DIA,
TO SPEC -IS:319-2007 GDE-1 HB (HALF HARD)
Testing / Inspection Facility
07
590
Kilogram
FLANGE 3806211059
Physical Verification needed
Description
FLANGE 3806211059
Specification
172.28.004-1/C
Drawing no.
172.28.004-1/C
Testing / Inspection Facility
38
250
Number
9081008305 WHEEL CHOCK TO DRG NO GCF 50 41092
Physical Verification needed
Description
WHEEL CHOCK TO DRG. NO. GCF/50/41092
Specification
WHEEL CHOCK TO DRG. NO. GCF/50/41092
Manufacturing Technology
As per tender document Annexure L & QAP
Testing / Inspection Facility
As per tender document Annexure L & QAP
90
192
Number
9081005873 MODIFIED BARREL CLEANING APPARATUS 155 MM GUN SYSTEM TO DRG NO GCF 50 41091
Physical Verification needed
Description
MODIFIED BARREL CLEANING APPARATUS (155 MM GUN SYSTEM) TO DRG NO.GCF/50/41091.
Specification
MODIFIED BARREL CLEANING APPARATUS (155 MM GUN SYSTEM) TO DRG NO.GCF/50/41091.
Manufacturing Technology
As per tender document annexure L & QAP
Testing / Inspection Facility
As per tender document annexure L & QAP
90
10
Number
LEVER STUD CHANGE LEFT
Description
Lever stud change left DRG No.0204-03-04-02-15-002-00DA for JVPC 5.56mm (MIM Route)
Specification
Lever stud change left DRG No.0204-03-04-02-15-002-00DA for JVPC 5.56mm (MIM Route)
Drawing no.
0204-03-04-02-15-002-00DA
Testing / Inspection Facility
1) Chemical & Mechanical properties as per std. given drawing /Specification.
2) Dimensional inspection for all dimension given in the drawing & other parameter which are mentioned in relevant drawing/specification
70
1722
Number
Supply of Magazine 7 62mm 2A ICR 84A DC No 22245 SA Dt 15 07 93 consisting of ICR 91SA DC No 22756 SA Dt12 12 94 and ICR 90SA DC No 22540 SA Dt 20 05 94 and DS CAT No 1005 000344 DC No 26829 SA Dt 11 05 16 required for 7 62mm SLR
Description
Supply of Magazine 7 62mm 2A ICR 84A DC No 22245 SA Dt 15 07 93 consisting of ICR 91SA DC No 22756 SA Dt12 12 94 and ICR 90SA DC No 22540 SA Dt 20 05 94 and DS CAT No 1005 000344 DC No 26829 SA Dt 11 05 16 required for 7 62mm SLR
Specification
Supply of Magazine 7 62mm 2A ICR 84A DC No 22245 SA Dt 15 07 93 consisting of ICR 91SA DC No 22756 SA Dt12 12 94 and ICR 90SA DC No 22540 SA Dt 20 05 94 and DS CAT No 1005 000344 DC No 26829 SA Dt 11 05 16 required for 7 62mm SLR
Drawing no.
Supply of Magazine 7 62mm 2A ICR 84A DC No 22245 SA Dt 15 07 93 consisting of ICR 91SA DC No 22756 SA Dt12 12 94 and ICR 90SA DC No 22540 SA Dt 20 05 94 and DS CAT No 1005 000344 DC No 26829 SA Dt 11 05 16 required for 7 62mm SLR
Manufacturing Technology
Supply of Magazine 7 62mm 2A ICR 84A DC No 22245 SA Dt 15 07 93 consisting of ICR 91SA DC No 22756 SA Dt12 12 94 and ICR 90SA DC No 22540 SA Dt 20 05 94 and DS CAT No 1005 000344 DC No 26829 SA Dt 11 05 16 required for 7 62mm SLR
Testing / Inspection Facility
Supply of Magazine 7 62mm 2A ICR 84A DC No 22245 SA Dt 15 07 93 consisting of ICR 91SA DC No 22756 SA Dt12 12 94 and ICR 90SA DC No 22540 SA Dt 20 05 94 and DS CAT No 1005 000344 DC No 26829 SA Dt 11 05 16 required for 7 62mm SLR
70
9375
Number
FABRICATION OF HAP SUB ASSEMBLY
Description
FABRICATION OF HAP SUB ASSEMBLY (PACK COVER HAP, BAG INNER HAP, CARRYING BAG HAP, AND HARNESS HAP)
Specification
HAP Bag Inner: ADRDE/1283/A4(b)
HAP Pack Cover: ADRDE/1283/A3(c)
HAP Harness : ADRDE/1283/A2(f)
HAP Carrying Bag: ADRDE/793/A12(f)
Manufacturing Technology
As per Specification/drawing
Testing / Inspection Facility
As per Specification/drawing
2110025074
200
Set
METALLIC REEL
Description
METALLIC REEL
Specification
SPECN NO.ADRDE/786-SA-1(e)
Manufacturing Technology
As per Specification/drawing
Testing / Inspection Facility
As per Specification/drawing
2110038026
284
Number
Fabric Nylon 66 48 GSM Undyed 95 Cm plus1 minus0
Description
Fabric Nylon 66, 48 GSM Undyed 95 Cm +1/-0
Specification
ADRDE/QMS/TDTM/F/2012/02 DATED 19 JAN 2012 and
(i) The fabric shall have an initial spray rating of 80, 80, 70 minimum when tested as per AATCC 22 or equivalent test method.
(ii) The manufacturer shall submit a certificate of compliance for each shipment indicating that fluorocarbon finish has been used.
Manufacturing Technology
As per Specification/drawing
Testing / Inspection Facility
As per specification/drawing
2101222000
41979
Metre
1777
EOI/PROVISIONAL/REGULARIZATION
Ordnance Equipment Factory
The General Manager,
Kanpur
Kanpur
Kanpur, Uttar Pradesh
208001
Name
Code
Quantity
Approx Value
Select
BAG CARRYING RESCUE COMPLETE
Description
BAG CARRYING RESCUE COMPLETE
Specification
DMSRDE/I&CS/95/426 (A)
Testing / Inspection Facility
21
AS PER TENDER
Number
0321150115 STAINLESS STEEL TUBE 115X90X510 MM
Physical Verification needed
Description
0321150115 STAINLESS STEEL TUBE TO SIZE OUTER DIA 115.00 (+) (-) 1.00 MM X INNER DIA 90.00 (+) (-) 1.00 MM X 510.00 (+)2.00 MM LONG TO SPECN: AISI-316.OR, AISI-304
Specification
0321150115 STAINLESS STEEL TUBE TO SIZE OUTER DIA 115.00 (+) (-) 1.00 MM X INNER DIA 90.00 (+) (-) 1.00 MM X 510.00 (+)2.00 MM LONG TO SPECN: AISI-316.OR, AISI-304
Manufacturing Technology
As per Specification & TE documents
Testing / Inspection Facility
As per Specification & TE documents
70
53
Number