2161
OFK/2019/05/IV/3
Ordnance Factory Khamaria
The Cheif General Manager
Khamaria
Khamaria
Madhya Pradesh
482005
Name
Code
Quantity
Approx Value
Select
PRE FRAG MODULE ASSEMBLY LF 9911358291
Description
PRE-FRAG MODULE ASSEMBLY TO DRG.NO.ARDE 08040001040000000PB, DT.14/05/2015
Specification
PRE-FRAG MODULE ASSEMBLY TO DRG.NO.ARDE 08040001040000000PB, DT.14/05/2015
Testing / Inspection Facility
99
200
Number
2162
TE NO 190401P2FO
Gun Carriage Factory
The General Manager,
Jabalpur
Jabalpur
Jabalpur,Madhya Pradesh
482011
2163
PV/OFCH/ADV REGD/JAN-20/69
Ordnance Factory Chanda
The Cheif General Manager
Chanda
Chanda
Maharashtra
442501
2164
110190301
Ordnance Parachute Factory
The General Manager,
Kanpur
Kanpur
Kanpur, Uttar Pradesh
208004
Name
Code
Quantity
Approx Value
Select
Tape Nylon 25point4 mm UD 403 KGF 3952 N V No 3
Description
Tape Nylon 25.4 mm U/D (403 KGF) 3952-N (V.No.3)
Specification
Specification No. JSS:8315-6.
Manufacturing Technology
As per drawing/specification
Testing / Inspection Facility
As per drawing/specification
2103784279
76
Metre
TAPE NYLON TUBULAR 26 plus minus 1 MM BS 1850KG ORANGE
Description
TAPE NYLON TUBULAR 26+-1 MM. BS : 1850KG ORANGE
Specification
Updated specification No. ADRDE/Specn/2000/54(e) received vide ADRDE, Agra letter No.ADRDE/QMS/TG(TE)/24 dtd. 30/07/2021.
Manufacturing Technology
As per specification/drawing
Testing / Inspection Facility
As per specification/drawing
2101777062
236
Metre
Tape Nylon 66 26mm BS 700 KG Orange
Description
Tape Nylon 66 26mm BS 700 KG Orange
Specification
SPECN NO.ADRDE/SPECN/65(a)
Manufacturing Technology
As per specification/drawing
Testing / Inspection Facility
As per specification/drawing
2101777071
262
Metre
FABRIC NYLON 58 GM UD 105 CM MIN WIDTH EXCLUDING SELVEDGE
Description
FABRIC NYLON 58 GM U/D 105 CM MIN. WIDTH EXCLUDING SELVEDGE
Specification
SPECN NO. AS PER TECH. PARTICULARS
(a) MASS/SQ MET : 58 GM (MAX)
(b) BREAKING STRENGTH, BOTH WAYS : 60 KGF (MIN)
(C) TEARING STRENGTH, BOTH WAYS : 1.7 KGF (MIN)
(d) AIR POROSITY : 7-10 CU.FT/SQ.FT/SEC.
(e) THICKNESS:0.11M, MAX AT A PRESSUE OF 200GM/SQCM.
(f) WIDTH : 105CM MIN. WIDTH EXCLUDING SELVEDGE
(g) YARN LENIER DENSITY, BOTHWAYS : 45 DENIER (Nominal)
(h) TWIST OF YARN : WARP:200 TPM, WEFT: 150TPM
(i) THREAD DENSITY, BOTHWAYS :48-50/CM.
(j) WEAVE:2/1 TWILL
NOTE -THERE SHOULD NOT BE ANY TYPE OF YARN DISTORTION/SLIPPAG
Manufacturing Technology
As per specification/drawing
Testing / Inspection Facility
As per specification/drawing
2101221384
7030
Metre
Tape Textile Nylon 44 mm Un Dyed 705 KGF 6915 N V No 6
Description
Tape Textile Nylon 44 mm Un Dyed (705 KGF) 6915-N (V. No. 6)
Specification
Specification – IS : 4228-1979
Manufacturing Technology
As per Drawing/Specification
Testing / Inspection Facility
As per Drawing/Specification
2103784278
575
Metre
Quick Release Unit for PP BMK41
Description
Quick Release Unit
Specification
ADRDE/1369(a)
DRD/26/98 EXCEPT THAT: - Dimensions of Central Pin
SN- For Read
(i) Dimension: 56.5 (Sheet No. 3 of 9) – Dimension: 52.1
(ii) Dimension: 53 (Sheet No. 3 of 9) – Dimension: 48.6
(iii) Dimension: 08 (Sheet No. 3 of 9) – Dimension: 6.4
Manufacturing Technology
As per drawing/specification
Testing / Inspection Facility
As per drawing/specification
2110071035
385
Number
Section Multipurpose Packing Frame
Description
Section Multipurpose Packing Frame
Specification
SPECN – ADRDE/1.6.01.04-26
Manufacturing Technology
As per Specification/drawing
Testing / Inspection Facility
As per Specification/drawing
2110090003
152
Number
Rip Cord Assembly for BMK41
Description
Rip Cord Assembly
Specification
ADRDE/1323(f)
Manufacturing Technology
As per Specification/drawing
Testing / Inspection Facility
As per Specification/drawing
2110071032
47
Number
Quick Release Connecting Lug Male for PP BMK41
Description
Quick Release Connecting Lug (Male)
Specification
DRAWING NO.: ADRDE/797(e) SHEET NO. 8.
Manufacturing Technology
As per Drawing/Specification
Testing / Inspection Facility
As per Drawing/Specification
2110064000
152
Number
2165
190137 TUNGSTEN POWDER
High Energy Projectile Factory
The Cheif General Manager
Trichy
Trichy
Trichy, Tamil Nadu
620025
Name
Code
Quantity
Approx Value
Select
ALUMINIUM ALLOY ROD 75MM DIA
Physical Verification needed
Description
ALUMINIUM ALLOY ROD 75MM DIA , TO ASTM B 221M GRADE 7075-T6510, AS PER SPECIFICATION ENCLOSED.
Specification
ASTM B 221M GRADE 7075-T6510
Manufacturing Technology
as per enclosed specification
Testing / Inspection Facility
as per enclosed specification
01
36,537
Kilogram
RECOVERY OF TUNGSTEN POWDER
Physical Verification needed
Description
RECOVERY OF TUNGSTEN POWDER FROM TUNGSTEN ALLOY SOLID SCRAP AND END PIECES AS PER SCOPE OF WORK ENCLOSED
Specification
as per enclosed MI
Testing / Inspection Facility
01
26797
Kilogram
2166
128MMETT20001880
Ordnance Factory Tiruchirapalli
The General Manager,
Tiruchirapalli
Tiruchirapalli
Tamil Nadu
620016
Name
Code
Quantity
Approx Value
Select
CABLE ASSY WNH3A
Physical Verification needed
Description
CABLE ASSY WNH3A AS PER DGR NO.Y20103A-00 FOR SRCG
Specification
CABLE ASSY WNH3A AS PER DGR NO.Y20103A-00 FOR SRCG
Testing / Inspection Facility
74
33
Number
CABLE ASSY AMMO SESNOR
Physical Verification needed
Description
CABLE ASSY, AMMO SESNOR (VIEW) AS PER DRG NO. Y18877A-00 FOR MAGAZINE ASSY OF SRCG
Specification
CABLE ASSY, AMMO SESNOR (VIEW) AS PER DRG NO. Y18877A-00 FOR MAGAZINE ASSY OF SRCG
Testing / Inspection Facility
74
34
Number
2167
O113-19
Ordnance Factory Dehradun
The General Manager,
Dehra Dun
Dehra Dun
Uttaranchal
248008
Name
Code
Quantity
Approx Value
Select
set of O ring LRF
Physical Verification needed
Description
set of O ring LRF
Specification
As per specification scope of work
Testing / Inspection Facility
As per specification scope of work
74
129
Number
2168
EOI13/PV/M1
Ordnance Factory Itarsi
The Cheif General Manager
Itarsi
Itarsi
Madhya Pradesh
461122
Name
Code
Quantity
Approx Value
Select
GUANIDINE NITRATE
Physical Verification needed
Description
GUANIDINE NITRATE TO SPECN.JSS 6810-95:2018 (REV.NO 04)DC NO -6135- ME DT 10-05-2021.
Specification
GUANIDINE NITRATE TO SPECN.JSS 6810-95:2018 (REV.NO 04)DC NO -6135- ME DT 10-05-2021.
Manufacturing Technology
Guanidine Nitrate is manufactured by heating Dicyandiamide confirming to IND/ME/878(Prov) with two equitant of Ammonium Nitrate confirming to IND/ME/86 degree C at 160 degree C.
Testing / Inspection Facility
Inspecti0on facility : Guanidine Nitrate and the packages in which it is packed shall be subject to inspection by and to the approval of the Quality Assurance Officer/Quality Assurance Authority
Testing facility/requirements : Samples taken from any portion of batch/lot/consignment of material shall confirm to the following test requirements
Sl no. Characteristics Passing standard
1. Physical form Crystalline
2. Bulk Density, g/ml Min. 0.70
Max. 0.90
3. Melting point, oC Min. 210
Max. 214
4 Water soluble at
30 oC, % by mass Min. 15.10
5. Guanidine Nitrate
, % by mass Min. 99
6. Ammonium Nitrate,
% by mass Max. 0.48
7. Urea Nil
8. Residue on ignition
, % by mass Max. 0.02
9. Moisture content
, % by mass Max. 0.48
10. Matter insoluble in
water at 20 oC, %
by mass Max . 0.50
11. Malamine, % by
mass Max 0.10
12. pH of water extract Min. 5
Max. 6
1001256000
118822
Kilogram
2169
3193000956
Small Arms Factory
The General Manager,
Kanpur
Kanpur
Kanpur, Uttar Pradesh
208009
Name
Code
Quantity
Approx Value
Select
Sear Safety for JVPC 5 56x30MM 0204 03 04 02 14 005 00DA MIM Route
Description
Sear Safety for JVPC 5 56x30MM 0204 03 04 02 14 005 00DA MIM Route
Specification
Sear Safety for JVPC 5 56x30MM 0204 03 04 02 14 005 00DA MIM Route
Drawing no.
0204 03 04 02 14 005 00DA MIM Route
Testing / Inspection Facility
Chemical and mechanical properties as per std. given drawing.
Dimensional inspection, for all dimensions given in the drawing a other parameter which are mentioned in relevant drawing
70
600
Number
Trigger Rear for JVPC 5 56 30MM To Drg No 0204 03 04 02 14 009 00DA MIM Route
Physical Verification needed
Description
Trigger Rear for JVPC 5.56x30MM To Drg. No. 0204-03-04-02-14-009-00DA (MIM Route)
Specification
Trigger Rear for JVPC 5.56x30MM To Drg. No. 0204-03-04-02-14-009-00DA (MIM Route)
Drawing no.
Drg. No. 0204-03-04-02-14-009-00DA (MIM Route)
Testing / Inspection Facility
Chemical and mechanical properties as per std. given drawing.
Dimensional inspection, for all dimensions given in the drawing a other parameter which are mentioned in relevant drawing
70
700
Number
Catch Magazine for JVPC 5 56 30MM 0204 03 04 02 14 014 00DA MIM Route
Physical Verification needed
Description
Catch Magazine for JVPC 5.56x30MM 0204-03-04-02-14-014-00DA (MIM Route)
Specification
Catch Magazine for JVPC 5.56x30MM 0204-03-04-02-14-014-00DA (MIM Route)
Drawing no.
0204-03-04-02-14-014-00DA (MIM Route)
Testing / Inspection Facility
1-Chemical and mechanical properties as per std. given drawing.
2- Dimensional inspection, for all dimensions given in the drawing a other parameter which are mentioned in relevant drawing
70
600
Number
Webbing Nylon Tubular 14 mm Undyed BS 1100 Kg for BP Mirage
Description
Webbing Nylon Tubular 14 mm Undyed (BS 1100 Kg)
Specification
ADRDE/Specn/1983/11(d).
Manufacturing Technology
As per Specification/Drawing
Testing / Inspection Facility
As per Specification/Drawing
2101877323
148764
Metre
9080080878 SPRING HELICAL COMPRESSION TO DRG NO GCF MN 5501 C REF DRG NO 5360 040480
Physical Verification needed
Description
9080080878 SPRING HELICAL COMPRESSION TO DRG NO GCF-MN 5501(C ) REF.DRG NO. 5360-040480
Specification
9080080878 SPRING HELICAL COMPRESSION TO DRG NO GCF-MN 5501(C ) REF.DRG NO. 5360-040480
Manufacturing Technology
As per QAP & TE documents.
Testing / Inspection Facility
As per QAP & TE documents
90
34
Number
9080080877 SPRING HELICAL COMPRESSION TO DRG NO GCF MN 5502 C REF DRG NO 5360 040481
Physical Verification needed
Description
9080080877 SPRING HELICAL COMPRESSION TO DRG NO GCF-MN-5502(C) (REF.DRG NO (5360-040481)
Specification
9080080877 SPRING HELICAL COMPRESSION TO DRG NO GCF-MN-5502(C) (REF.DRG NO (5360-040481)
Testing / Inspection Facility
90
34
Number
RETAINER PACKING CROSS SECTIONAL TO DS CAT NO 5330 023797
Physical Verification needed
Description
RETAINER PACKING CROSS SECTIONAL TO DS CAT NO 5330-023797
Specification
RETAINER PACKING CROSS SECTIONAL TO DS CAT NO 5330-023797
Testing / Inspection Facility
90
179
Number
Overhauling of Firing Mechanism Assy to Drg No 2A46 Cd10 20 Cb with replace old contactor and Electromagnet with new one
Physical Verification needed
Description
overhauling of firing mechanism Assy to Drg No 2A46-Cd10-20 cb with replace old contactor & electromagnet with new one (item code-9073001198)
Specification
overhauling of firing mechanism Assy to Drg No 2A46-Cd10-20 cb with replace old contactor & electromagnet with new one (item code-9073001198)
Testing / Inspection Facility
90
18
Number
2170
ORDFYS/FGK/PV-19/ADV-45
Field Gun Factory Kanpur
The General Manager,
Kanpur
Kanpur
Uttar Pradesh
208009
Name
Code
Quantity
Approx Value
Select
NICKLE AND CHROME PLATING AT 76 62 MM SRGM BARREL AND LINER AS PER ANNEXURE B AND C REFERENCE DRAWING NO SK 01265 AND SK 01264
Physical Verification needed
Description
NICKLE AND CHROME PLATING AT 76 62 MM SRGM BARREL AND LINER AS PER ANNEXURE B AND C REFERENCE DRAWING NO SK 01265 AND SK 01264
Specification
NICKLE AND CHROME PLATING AT 76 62 MM SRGM BARREL AND LINER AS PER ANNEXURE B AND C REFERENCE DRAWING NO SK 01265 AND SK 01264
Testing / Inspection Facility
41
36
Number
SEAR FOR JVPC 5 56 MM
Description
Sear Through MIM Route for JVPC 5.56x30 mm DRG No.0204-03-04-02-14-010-00DA.
Specification
Sear Through MIM Route for JVPC 5.56x30 mm DRG No.0204-03-04-02-14-010-00DA.
Drawing no.
DRG No.0204-03-04-02-14-010-00DA.
Testing / Inspection Facility
Chemical and mechanical properties as per std. given drawing.
Dimensional inspection, for all dimensions given in the drawing a other parameter which are mentioned in relevant drawing.
70
800
Number
ST FLAT 70X34MM IN HOT ROLLED and ANNEALED CONDITION
Description
ST.FLAT 70X34MM IN HOT ROLLED & ANNEALED CONDITION TO SPECN. BS:970:PT-3:1991.GD.410S21 OR 420S29.TEST PIECE TO BE TESTED AS PER RULINF SECTION. MATL.SHOULD SATISFY MACRO-ETCH TEST & MICROSCOPIC NON-METALIC INCLUSION RATING(II) AS PER NATURE-C A SEPARATE T.P.TO BE HARDNED TO ACHIEVE HARDNESS 265-300 BHN
Specification
ST.FLAT 70X34MM IN HOT ROLLED & ANNEALED CONDITION TO SPECN. BS:970:PT-3:1991.GD.410S21 OR 420S29.TEST PIECE TO BE TESTED AS PER RULINF SECTION. MATL.SHOULD SATISFY MACRO-ETCH TEST & MICROSCOPIC NON-METALIC INCLUSION RATING(II) AS PER NATURE-C A SEPARATE T.P.TO BE HARDNED TO ACHIEVE HARDNESS 265-300 BHN
Testing / Inspection Facility
01
1481
Kilogram
STEEL FLAT 17X47MM IN HOT ROLLED AND ANNEALED AT 650 C
Description
STEEL FLAT 17X47MM IN HOT ROLLED AND ANNEALED AT 650'C TO SPECN.BS:970:PT-3:1991 GD.945M38 T.P.TESTED IN `T'CONDITION MACRO ETCH TEST & NMIR TEST AS PER ANNEXURE-A NATURE-C. (REQD.FOR-SHOULDER LOCKING LEFT & RIGHT DS CAT 1005-007907)
Specification
STEEL FLAT 17X47MM IN HOT ROLLED AND ANNEALED AT 650'C TO SPECN.BS:970:PT-3:1991 GD.945M38 T.P.TESTED IN `T'CONDITION MACRO ETCH TEST & NMIR TEST AS PER ANNEXURE-A NATURE-C. (REQD.FOR-SHOULDER LOCKING LEFT & RIGHT DS CAT 1005-007907)
Testing / Inspection Facility
03
820
Kilogram
CABLE ASSY WPKS12B
Physical Verification needed
Description
CABLE ASSY WPKS12B (VIEW) AS PER DGR NO.Y18506A-00 FOR TRAVERSE ASSY OF SRCG
Specification
CABLE ASSY WPKS12B (VIEW) AS PER DGR NO.Y18506A-00 FOR TRAVERSE ASSY OF SRCG
Testing / Inspection Facility
74
34
Number
CABLE ASSY WSS3
Physical Verification needed
Description
CABLE ASSY WSS3 (VIEW) AS PER DGR NO.Y18509A-00 FOR STAND ASSY OF SRCG
Specification
CABLE ASSY WSS3 (VIEW) AS PER DGR NO.Y18509A-00 FOR STAND ASSY OF SRCG
Testing / Inspection Facility
74
33
Number
FORGING BARREL EXTENSION FOR M2HB GUN OOW50BMG AS PER DRG NO 6528254 FORGE
Physical Verification needed
Description
FORGING, BARREL EXTENSION FOR M2HB GUN OOW50BMG AS PER DRG. NO. 6528254-FORGE
Specification
FORGING, BARREL EXTENSION FOR M2HB GUN OOW50BMG AS PER DRG. NO. 6528254-FORGE
Testing / Inspection Facility
74
591
Number
PREMACHINED BLANK FOR M2HB GUN BOLT ALTERNATE FEED OO50BMG AS PER DRG NO TEND 2670
Physical Verification needed
Description
PRE-MACHINED BLANK FOR M2HB GUN BOLT, ALTERNATE FEED , OO50BMG AS PER DRG. NO. TEND-2670
Specification
PRE-MACHINED BLANK FOR M2HB GUN BOLT, ALTERNATE FEED , OO50BMG AS PER DRG. NO. TEND-2670
Testing / Inspection Facility
74
591
Number
PREMACHINED BLANK FOR M2HB GUN BLOCK TRUNNION OO50BMG AS PER DRG NO TEND 2672
Physical Verification needed
Description
PRE-MACHINED BLANK FOR M2HB GUN BLOCK, TRUNNION, OO50BMG AS PER DRG. NO. TEND-2672
Specification
PRE-MACHINED BLANK FOR M2HB GUN BLOCK, TRUNNION, OO50BMG AS PER DRG. NO. TEND-2672
Testing / Inspection Facility
74
591
Number
for collaboration co production of holographic sight with BDC reticle
Physical Verification needed
Description
for collaboration co production of holographic sight with BDC reticle
Specification
for collaboration co production of holographic sight with BDC reticle
Testing / Inspection Facility
74
1
Number
SUB ASSEMBLY PRISM As Per DRG No Y 4411296 i Prism AP 90 Deg DRG No Y 7160336 ii Prism AP 90 Deg DRG No Y 7170036
Physical Verification needed
Description
SUB ASSEMBLY PRISM, As Per DRG. NO. Y-4411296
i). Prism AP-90 Deg. DRG. No. Y-7160336
ii). Prism AP-90 Deg. DRG. No. Y-7170036
Specification
SUB ASSEMBLY PRISM, As Per DRG. NO. Y-4411296
i). Prism AP-90 Deg. DRG. No. Y-7160336
ii). Prism AP-90 Deg. DRG. No. Y-7170036
Drawing no.
DRG. NO. Y-4411296 { (i). Prism AP-90 Deg. DRG. No. Y-7160336 (ii). Prism AP-90 Deg. DRG. No. Y-7170036}
Testing / Inspection Facility
26
73
Set
INVESTMENT CASTING COCKING BRACKET
Description
INVESTMENT CASTING COCKING BRACKET FOR JVPC 5.56X30MM DRG.NO. SK-JVPC-598*1
Specification
INVESTMENT CASTING COCKING BRACKET FOR JVPC 5.56X30MM DRG.NO. SK-JVPC-598*1
Drawing no.
SK-JVPC-598*1
Testing / Inspection Facility
1) Chemical & Mechanical properties as per std. given drawing /Specification.
2) Dimensional inspection for all dimension given in the drawing & other parameter which are mentioned in relevant drawing/specification.
70
1075
Number
2171
2019000155
Ordnance Factory Dehu Road
The Cheif General Manager
Dehu Road
Dehu Road
Maharashtra
412101
Name
Code
Quantity
Approx Value
Select
PARACHUTE SYSTEM FOR 84 MM CARL GUSTAF ILLG AMMN GEN ASSY TO DRG NO
Description
PARACHUTE SYSTEM FOR 84 MM CARL GUSTAF ILLG AMMN GEN ASSY TO DRG NO ADRDE/543(b) 9 SHEET SHEET NO 1( WITHOUT LOOP BAND )
Specification
DRG NO ADRDE/543(b) 9 SHEET SHEET NO 1( WITHOUT LOOP BAND )
Manufacturing Technology
AS PER DRAWING DRG NO ADRDE/543(b) 9 SHEET SHEET NO 1( WITHOUT LOOP BAND )
Testing / Inspection Facility
AS PER DRAWING DRG NO ADRDE/543(b) 9 SHEET SHEET NO 1( WITHOUT LOOP BAND )
62
12000
Number
CABLE ASSY WNH5A
Physical Verification needed
Description
CABLE ASSY WNH5A AS PER DRGNO.Y20099A-00 FOR SRCG
Specification
CABLE ASSY WNH5A AS PER DRGNO.Y20099A-00 FOR SRCG
Testing / Inspection Facility
74
33
Number
CABLE ASSY WNH1A
Physical Verification needed
Description
CABLE ASSY WNH1A AS PER DRG No.Y20105A-00 FOR SRCG
Specification
CABLE ASSY WNH1A AS PER DRG No.Y20105A-00 FOR SRCG
Testing / Inspection Facility
74
33
Number
CABLE ASSY WNH2
Physical Verification needed
Description
CABLE ASSY WNH2 AS PER DRG No.Y20104A-00 FOR SRCG
Specification
CABLE ASSY WNH2 AS PER DRG No.Y20104A-00 FOR SRCG
Testing / Inspection Facility
74
33
Number
CABLE ASSY WNH3A
Physical Verification needed
Description
CABLE ASSY WNH3A AS PER DGR NO.Y20103A-00 FOR SRCG
Specification
CABLE ASSY WNH3A AS PER DGR NO.Y20103A-00 FOR SRCG
Testing / Inspection Facility
74
33
Number
BLOCK STORAGE WELDED
Description
BLOCK STORAGE WELDED (VIEW) AS PER DRG .Y17592A-00 FOR STAND WEAPON ASSY OF SRCG.
Specification
BLOCK STORAGE WELDED (VIEW) AS PER DRG .Y17592A-00 FOR STAND WEAPON ASSY OF SRCG.
Testing / Inspection Facility
74
34
Number
WASHER LOCK TAB M4
Physical Verification needed
Description
WASHER LOCK TAB M4 AS PER DRG Y00963A-00 FOR STAND WEAPON ASSY OF SRCG
Specification
WASHER LOCK TAB M4 AS PER DRG Y00963A-00 FOR STAND WEAPON ASSY OF SRCG
Testing / Inspection Facility
74
102
Number
SLIDER LINKS M9 WELDMENT
Physical Verification needed
Description
SLIDER LINKS M9 WELDMENT (View)AS PER DRG NO.Y17631A-00 STAND WEAPONASSY OF SRCG
Specification
SLIDER LINKS M9 WELDMENT (View)AS PER DRG NO.Y17631A-00 STAND WEAPONASSY OF SRCG
Testing / Inspection Facility
SLIDER LINKS M9 WELDMENT (View)AS PER DRG NO.Y17631A-00 STAND WEAPONASSY OF SRCG
74
33
Number
WRENCH
Physical Verification needed
Description
WRENCH (View) AS PER DRG NO.Y28656A-00 FOR STAND WEAPON ASSY OF SRCG
Specification
WRENCH (View) AS PER DRG NO.Y28656A-00 FOR STAND WEAPON ASSY OF SRCG
Testing / Inspection Facility
74
34
Number
SPRING FLAT
Physical Verification needed
Description
SPRING FLAT AS PER DRG NO.Y28657A-00 FOR STAND WEAPON ASSY OF SRCG
Specification
SPRING FLAT AS PER DRG NO.Y28657A-00 FOR STAND WEAPON ASSY OF SRCG
Testing / Inspection Facility
74
34
Number
SPACER
Physical Verification needed
Description
SPACER (View) AS PER DRG NO.075389A-00 FOR COCKING MECH.ASSY OF SRCG
Specification
SPACER (View) AS PER DRG NO.075389A-00 FOR COCKING MECH.ASSY OF SRCG
Testing / Inspection Facility
74
17
Number
Screw Breech Lock Cam OOW50BMG as per Drawing No 5152938 of M2HB Gun
Physical Verification needed
Description
Screw, Breech Lock Cam, OOW50BMG as per Drawing No. 5152938 of M2HB Gun
Specification
Screw, Breech Lock Cam, OOW50BMG as per Drawing No. 5152938 of M2HB Gun
Drawing no.
Screw, Breech Lock Cam, OOW50BMG as per Drawing No. 5152938 of M2HB Gun
Manufacturing Technology
As fulfilling the requirements for manufacturing of the component as per QAP & Drawing
Testing / Inspection Facility
As fulfilling the requirements for inspection of the component as per QAP & Drawing
74
166
Number
Bearing Breech OOW50BMG as per Drawing No 6008920 of M2HB Gun
Physical Verification needed
Description
Bearing, Breech, OOW50BMG as per Drawing No. 6008920 of M2HB Gun
Specification
Bearing, Breech, OOW50BMG as per Drawing No. 6008920 of M2HB Gun
Drawing no.
Bearing, Breech, OOW50BMG as per Drawing No. 6008920 of M2HB Gun
Manufacturing Technology
As fulfilling the requirements for manufacturing of the component as per QAP & Drawing
Testing / Inspection Facility
As fulfilling the requirements for inspection of the component as per QAP & Drawing
74
83
Number
Pin Belt Holding Pawl OOW50BMG as per Drawing No 7162872 of M2HB Gun
Physical Verification needed
Description
Pin, Belt Holding Pawl, OOW50BMG as per Drawing No. 7162872 of M2HB Gun
Specification
Pin, Belt Holding Pawl, OOW50BMG as per Drawing No. 7162872 of M2HB Gun
Drawing no.
Pin, Belt Holding Pawl, OOW50BMG as per Drawing No. 7162872 of M2HB Gun
Manufacturing Technology
As fulfilling the requirements for manufacturing of the component as per QAP & Drawing
Testing / Inspection Facility
As fulfilling the requirements for inspection of the component as per QAP & Drawing
74
166
Number
Peel Away Shim Trunnion Block OOW50BMG as per Drawing No 6008982 PA of M2HB Gun
Physical Verification needed
Description
Peel Away Shim, Trunnion Block, OOW50BMG as per Drawing No. 6008982-PA of M2HB Gun
Specification
Peel Away Shim, Trunnion Block, OOW50BMG as per Drawing No. 6008982-PA of M2HB Gun
Drawing no.
Peel Away Shim, Trunnion Block, OOW50BMG as per Drawing No. 6008982-PA of M2HB Gun
Manufacturing Technology
As fulfilling the requirements for manufacturing of the component as per QAP & Drawing
Testing / Inspection Facility
As fulfilling the requirements for inspection of the component as per QAP & Drawing
74
166
Number
Nut Bolt Latch Rod OOW50BMG as per Drawing No 5013526 of M2HB Gun
Physical Verification needed
Description
Nut, Bolt Latch Rod, OOW50BMG as per Drawing No. 5013526 of M2HB Gun
Specification
Nut, Bolt Latch Rod, OOW50BMG as per Drawing No. 5013526 of M2HB Gun
Drawing no.
Nut, Bolt Latch Rod, OOW50BMG as per Drawing No. 5013526 of M2HB Gun
Manufacturing Technology
As fulfilling the requirements for manufacturing of the component as per QAP & Drawing
Testing / Inspection Facility
As fulfilling the requirements for inspection of the component as per QAP & Drawing
74
166
Number
Screw Lock Breech Bearing OOW50BMG as per Drawing No 5013530 of M2HB Gun
Physical Verification needed
Description
Screw Lock, Breech Bearing, OOW50BMG as per Drawing No. 5013530 of M2HB Gun
Specification
Screw Lock, Breech Bearing, OOW50BMG as per Drawing No. 5013530 of M2HB Gun
Drawing no.
Screw Lock, Breech Bearing, OOW50BMG as per Drawing No. 5013530 of M2HB Gun
Manufacturing Technology
As fulfilling the requirements for manufacturing of the component as per QAP & Drawing
Testing / Inspection Facility
As fulfilling the requirements for inspection of the component as per QAP & Drawing
74
166
Number
Spring Locking Barrel OOW50BMG as per Drawing No 7266134 of M2HB Gun
Physical Verification needed
Description
Spring, Locking Barrel, OOW50BMG as per Drawing No. 7266134 of M2HB Gun
Specification
Spring, Locking Barrel, OOW50BMG as per Drawing No. 7266134 of M2HB Gun
Drawing no.
Spring, Locking Barrel, OOW50BMG as per Drawing No. 7266134 of M2HB Gun
Manufacturing Technology
As fulfilling the requirements for manufacturing of the component as per QAP & Drawing
Testing / Inspection Facility
As fulfilling the requirements for inspection of the component as per QAP & Drawing
74
166
Number
Screw Machine Flat Countersunk Head OOW50BMG as per Drawing No 5153191 of M2HB Gun
Physical Verification needed
Description
Screw, Machine, Flat Countersunk Head, OOW50BMG as per Drawing No. 5153191 of M2HB Gun
Specification
Screw, Machine, Flat Countersunk Head, OOW50BMG as per Drawing No. 5153191 of M2HB Gun
Drawing no.
Screw, Machine, Flat Countersunk Head, OOW50BMG as per Drawing No. 5153191 of M2HB Gun
Manufacturing Technology
As fulfilling the requirements for manufacturing of the component as per QAP & Drawing
Testing / Inspection Facility
As fulfilling the requirements for inspection of the component as per QAP & Drawing
74
332
Number
Screw Externally relieved Body OOW50BMG as per Drawing No 7312028 of M2HB Gun
Physical Verification needed
Description
Screw, Externally relieved Body, OOW50BMG as per Drawing No. 7312028 of M2HB Gun
Specification
Screw, Externally relieved Body, OOW50BMG as per Drawing No. 7312028 of M2HB Gun
Drawing no.
Screw, Externally relieved Body, OOW50BMG as per Drawing No. 7312028 of M2HB Gun
Manufacturing Technology
As fulfilling the requirements for manufacturing of the component as per QAP & Drawing
Testing / Inspection Facility
As fulfilling the requirements for inspection of the component as per QAP & Drawing
74
166
Number
Pawl Cover Detent OOW50BMG as per Drawing No 7313069 of M2HB Gun
Physical Verification needed
Description
Pawl, Cover Detent, OOW50BMG as per Drawing No. 7313069 of M2HB Gun
Specification
Pawl, Cover Detent, OOW50BMG as per Drawing No. 7313069 of M2HB Gun
Drawing no.
Pawl, Cover Detent, OOW50BMG as per Drawing No. 7313069 of M2HB Gun
Manufacturing Technology
As fulfilling the requirements for manufacturing of the component as per QAP & Drawing
Testing / Inspection Facility
As fulfilling the requirements for inspection of the component as per QAP & Drawing
74
166
Number
Spring Helical Compression OOW50BMG as per Drawing No 7313068 of M2HB Gun
Physical Verification needed
Description
Spring, Helical Compression, OOW50BMG as per Drawing No. 7313068 of M2HB Gun
Specification
Spring, Helical Compression, OOW50BMG as per Drawing No. 7313068 of M2HB Gun
Drawing no.
Spring, Helical Compression, OOW50BMG as per Drawing No. 7313068 of M2HB Gun
Manufacturing Technology
As fulfilling the requirements for manufacturing of the component as per QAP & Drawing
Testing / Inspection Facility
As fulfilling the requirements for inspection of the component as per QAP & Drawing
74
166
Number
Blade Front Sight OOW50BMG as per Drawing No 6008934 of M2HB Gun
Physical Verification needed
Description
Blade, Front Sight, OOW50BMG as per Drawing No. 6008934 of M2HB Gun
Specification
Blade, Front Sight, OOW50BMG as per Drawing No. 6008934 of M2HB Gun
Drawing no.
6008934 of M2HB Gun
Manufacturing Technology
As fulfilling the requirements for manufacturing of the component as per QAP & Drawing
Testing / Inspection Facility
As fulfilling the requirements for inspection of the component as per QAP & Drawing
74
166
Number
Cover Front Sight OOW50BMG as per Drawing No 6008935 of M2HB Gun
Physical Verification needed
Description
Cover, Front Sight OOW50BMG as per Drawing No 6008935 of M2HB Gun
Specification
Cover Front Sight OOW50BMG as per Drawing No 6008935 of M2HB Gun
Drawing no.
6008935 of M2HB Gun
Manufacturing Technology
As fulfilling the requirements for manufacturing of the component as per QAP & Drawing
Testing / Inspection Facility
As fulfilling the requirements for inspection of the component as per QAP & Drawing
74
166
Number
2172
OFM/PV/EOI/2019/10
Ordnance Factory Muradnagar
The General Manager,
Muradnagar
Muradnagar
Uttar Pradesh
201206
Name
Code
Quantity
Approx Value
Select
LUG HOUSING ASSEMBLY FOR 450 KG SHELL BODY ITEM CODE 6241101139
Description
LUG HOUSING ASSEMBLY FOR 450 KG SHELL BODY AS PER ANNEXURE-A (ATTACHED
Specification
LUG HOUSING ASSEMBLY FOR 450 KG SHELL BODY AS PER ANNEXURE-A (ATTACHED
Drawing no.
ARDE 2122 DET. NO.5, ARDE 2122 DET. NO.6
Manufacturing Technology
1. Forging hammer (min. 1 ton)of adequate capacity
2. Horizontal Milling Machine /Vertical Milling Machine/Vertical Machining Centre
3. Centre Lathe/CNC Lathe.
4. Welding facility.
Testing / Inspection Facility
1. Chemical testing facility
2. Mechanical testing facility (UTS, PS, elongation , harness, impact)
3. Heat treatment facility
4. D P Test
62
100
Number
PHOSPHOR BRONZE ROD 127MM DIA X 1 MTR LONG OR ITS MULTIPLE TO SPECN BS 2874 1986 DESIGNATION PB 102
Physical Verification needed
Description
PHOSPHOR BRONZE ROD 127MM DIA X 1 MTR LONG OR ITS MULTIPLE TO SPECN: BS:2874-1986, DESIGNATION PB-102
Specification
PHOSPHOR BRONZE ROD 127MM DIA X 1 MTR LONG OR ITS MULTIPLE TO SPECN: BS:2874-1986, DESIGNATION PB-102
Testing / Inspection Facility
70
1122
Kilogram
STEEL FLAT 36 MM X 62 MM
Description
STEEL FLAT 36 MM X 62 MM BS: 970 PT-1 1983 GD. 835 M 15 OR EN- 39-B
Specification
STEEL FLAT 36 MM X 62 MM BS: 970 PT-1 1983 GD. 835 M 15 OR EN- 39-B
Manufacturing Technology
Raw Material
(as per specification)
Testing / Inspection Facility
1) Chemical & Mechanical properties as per std. given drawing.
2) Dimensional inspection for all dimension given in the drawing & other parameter which are mentioned in relevant specification..
04
1088
Kilogram
2173
HVF/TE0102190209/2019-20/TA/CBOI/SD-OTE dt 03/02/2020
Heavy Vehicle Factory
The Sr.General Manager,
Avadi
Avadi
Avadi, Tamil Nadu
600054
Name
Code
Quantity
Approx Value
Select
RH REAR FLANGE OPN 10 TO 20 SMF TO LF3951040114
Physical Verification needed
Description
RH REAR FLANGE (OPN.10.20) SMF TO DRG NO:172.40.372/SMF
Specification
GOST 4543-71
Drawing no.
172.40.372/SMF
Testing / Inspection Facility
39
31
Number
DRUM RH LH TO LF3906401123
Physical Verification needed
Description
DRUM RH LH TO DRG NO:175.40.017-A & 018-A/F
Specification
GOST 4543-71
Drawing no.
175.40.017-A & 018-A/F
Testing / Inspection Facility
39
55
Number
SHAFT TORSION FORGING TO LF3996411023
Physical Verification needed
Description
SHAFT TORSION FORGING TO DRG NO: 172.51.016/F
Specification
GOST 4543-71
Testing / Inspection Facility
39
240
Number
TORSION BAR FORGING TO LF3991051007
Physical Verification needed
Description
TORSION BAR FORGING TO DRG NO: 172.51.016-1/F
Specification
GOST 4543-71
Drawing no.
172.51.016-1/F
Testing / Inspection Facility
39
240
Number
DRIVEN SHAFT OPN 10 TO 70 SMF TO LF3951040048
Physical Verification needed
Description
DRIVEN SHAFT OPN 10 TO 70 SMF TO DRG NO: 172.40.315-1/SMF
Specification
GOST 4543-71
Drawing no.
172.40.315-1/SMF
Testing / Inspection Facility
39
112
Number
RH DRUM TO 3901040034
Physical Verification needed
Description
RH DRUM TO DRG NO:172.40.300/F
Specification
GOST 4543-71
Testing / Inspection Facility
39
113
Number
WHEEL GEAR RH TO LF3906401104
Physical Verification needed
Description
WHEEL GEAR RH TO DRG NO: 175.40.004/F
Specification
GOST 4543-71
Testing / Inspection Facility
39
165
Number
LH FRONT FLANGE TO LF3901040106
Physical Verification needed
Description
LH FRONT FLANGE TO DRG NO: 172.40.365/F
Specification
GOST 4543-71
Testing / Inspection Facility
39
30
Number
DRUM OPN 10 20 SEMI MACHINED FORGING TO DRG NO 175 40 026 SMF TO LF3956401128
Physical Verification needed
Description
DRUM OPN 10 20 SEMI MACHINED FORGING TO DRG NO 175 40 026 SMF
Specification
GOST 4543 71
Drawing no.
175 40 026 SMF
Testing / Inspection Facility
39
351
Number
MOUNTING RAIL for JVPC
Description
MOUNTING RAIL for JVPC 5.56 MM DRG. NO. 0204-03-02-15-28-001-00DF
Specification
MOUNTING RAIL
Drawing no.
DRG. NO. 0204-03-02-15-28-001-00DF
Testing / Inspection Facility
1) Chemical & Mechanical properties as per std. given drawing /Specification.
2) Dimensional inspection for all dimension given in the drawing & other parameter which are mentioned in relevant drawing/specification.
70
1191
Number
9081002749 EJECTOR PROJECTILE MODIFIED DRG NO GCF 50 39423
Physical Verification needed
Description
9081002749 EJECTOR PROJECTILE (MODIFIED) DRG. NO. GCF/50/39423
Specification
9081002749 EJECTOR PROJECTILE (MODIFIED) DRG. NO. GCF/50/39423
Manufacturing Technology
As per Tender Document QAP.
Testing / Inspection Facility
As per Tender Document QAP.
90
15
Number
STATOR 05 COCKING AS PER DRG 079215A 01 FOR COCKING MECH ASSY OF SRCG and ROTOR 05 COCKING AS PER DRG 079215A 02 FOR ROTOR ASSY OF SRCG
Physical Verification needed
Description
STATOR 05 COCKING AS PER DRG 079215A 01 FOR COCKING MECH ASSY OF SRCG and ROTOR 05 COCKING AS PER DRG 079215A 02 FOR ROTOR ASSY OF SRCG
Specification
STATOR 05 COCKING AS PER DRG 079215A 01 FOR COCKING MECH ASSY OF SRCG and ROTOR 05 COCKING AS PER DRG 079215A 02 FOR ROTOR ASSY OF SRCG as per drg
Testing / Inspection Facility
74
87
Number