FORGING TO DRG NO 64C 1005 200 F3. WITH FIRM'S MATERIAL. REQD FOR: STRIP C1005

AS PER DRG TO FORGING TO DRG NO 64C 1005 200 F3. WITH FIRM'S MATERIAL. REQD FOR: STRIP C1005

C1005

• As per OFT requirements

• As per OFT requirements

PLUG TO DRAWING NO: CQA(I) 393/4

PLUG TO DRAWING NO: CQA(I) 393/4

• PLUG TO DRAWING NO: CQA(I) 393/4

• GM/OFMK

CONVERSION FORGING TO DRG. NO. 64C 5116 200 G2 REQUIRED FOR TRAY TO DRG. NO. 2A42.05.116 (C5116)

AS PER DRG TO CONVERSION FORGING TO DRG. NO. 64C 5116 200 G2 REQUIRED FOR TRAY TO DRG. NO. 2A42.05.116 (C5116)

C5116

• As per OFT requirements

• As per OFT requirements

Front Frame Forging for Front Frame as per drawing

Front Frame Forging for Front Frame as per drawing

30C 1104 001 A3

• FIRMS MANUFACTURING TECHNOLOGY TO PRODUCE THE COMPONENT AS PER OFT DRAWING AND QUALITY MONITORING FOR INSPECTION
• PROCESS AND QUALITY PLAN OF THE FIRM TO PRODUCE THE COMPONENT AS PER OFT DRAWING AND QUALITY MONITORING FOR INSPECTION

• FIRMS INSPECTION FACILITY TO PRODUCE THE COMPONENT AS PER OFT DRAWING AND QUALITY MONITORING FOR INSPECTION
• MECHANICAL INCLUDING IMPACT TEST AND CHEMICAL REPORT FROM NABL CERTIFIED LAB FOR RAW MATERIAL

FABRIC TWILL WEAVE POLYESTER AND COTTON (67:33) DISRUPTIVE PATT WR 290 GSM 150 cm WIDTH MIN WITH INDIAN ARMY LOGO PROV.SPECIFICATION No. PROV/S/2599/TC11/2009/01, EXCEPT THAT CLAUSE NO. 6.1 &6.2 WHICH SHALL BE" SUITABLE YARN COUNT MAY BE USED IN WARP & WEFT IN 3/1 TWILL WEAVE TO MEET THE FUNCTIONAL & OTHER CONSTRUCTIONAL PARAMETERS ALONGWITH FEEL& FINISH"& CLAUSE No. 16.1 WHICH SHALL BE AS PER SCHEDULE NO.CQA (T&C)/PMS/35(d), EXCEPT THAT THE FABRIC SHALL BE SUPPLIED IN ROLL FORM ONLYAS PER RELEVANT CLAUSE OF SPECIFICATION.

FABRIC TWILL WEAVE POLYESTER AND COTTON (67:33) DISRUPTIVE PATT WR 290 GSM 150 cm WIDTH MIN WITH INDIAN ARMY LOGO PROV.SPECIFICATION No. PROV/S/2599/TC11/2009/01, EXCEPT THAT CLAUSE NO. 6.1 &6.2 WHICH SHALL BE" SUITABLE YARN COUNT MAY BE USED IN WARP & WEFT IN 3/1 TWILL WEAVE TO MEET THE FUNCTIONAL & OTHER CONSTRUCTIONAL PARAMETERS ALONGWITH FEEL& FINISH"& CLAUSE No. 16.1 WHICH SHALL BE AS PER SCHEDULE NO.CQA (T&C)/PMS/35(d), EXCEPT THAT THE FABRIC SHALL BE SUPPLIED IN ROLL FORM ONLYAS PER RELEVANT CLAUSE OF SPECIFICATION.

• as per attached list (Manufacturing Technology Files )

• as per attached list (Testing / Inspection Facility Files )

DIFFUSER LIGHT GREEN MK-I CELASTOID(TRANSLUCENT) DRG.NO. OS-14634 SIZE-130X158X0.76MM THICK, TOLERANCE-0.15MM

DIFFUSER LIGHT GREEN MK-I CELASTOID(TRANSLUCENT) DRG.NO. OS-14634 SIZE-130X158X0.76MM THICK, TOLERANCE-0.15MM

OS-14634

• N/A

• N/A

DIFFUSER LIGHT WHITE MK-I AS PER DRG.NO.OS-14633 SIZE-130X158X0.76MM THICK, TOLERANCE-0.15MM

DIFFUSER LIGHT WHITE MK-I AS PER DRG.NO.OS-14633 SIZE-130X158X0.76MM THICK, TOLERANCE-0.15MM

• N/A

• N/A

LEAD ELECTRICAL OS-1131A CONSISTING OF COMPONENTS AS PER DRG.NO.OS 14620,14621,14622,14623,14624,14625, 14626,14627

LEAD ELECTRICAL OS-1131A CONSISTING OF COMPONENTS AS PER DRG.NO.OS 14620,14621,14622,14623,14624,14625, 14626,14627

OS 14620,14621,14622,14623,14624,14625, 14626,14627

• ELECTRONIC SUB ASSY , ASSEMBLIES, MULTI LAYERED PCB

• PCB DESIGNING COMPONENT SELECTION ASSOCIATED TESTING / INSPECTION FACILITIES

CASE LIGHT SET, DRG.NO.OS-14619 SHEET-1 & SHEET-2 FOR LIGHT BEACON DIRECTOR MK-I

CASE LIGHT SET, DRG.NO.OS-14619 SHEET-1 & SHEET-2 FOR LIGHT BEACON DIRECTOR MK-I

OS-14619 SHEET-1 & SHEET-2

• MECHANICAL COMPONENTS HAVING MORE THAN FIVE CONTROL DIMENSION

• MACHINING & ASSOCIATED TESTING/INSPECTION FACILITIES

BRACKET OS-14630 SHT 1&2

BRACKET OS-14630 SHT 1&2

OS-14630 SHT 1&2

• MECHANICAL COMPONENTS HAVING MORE THAN FIVE CONTROL DIMENSION

• MACHINING & ASSOCIATED TESTING/INSPECTION FACILITIES

HOLDER LIGHT DIFFUSER CII 423 CONSISTING OF DRG NO OS 14628 SHT 1,2,3,4 & OS 14629

HOLDER LIGHT DIFFUSER CII 423 CONSISTING OF DRG NO OS 14628 SHT 1,2,3,4 & OS 14629

OS 14628 SHT 1,2,3,4 & OS 14629

• MECHANICAL COMPONENTS HAVING MORE THAN FIVE CONTROL DIMENSION

• MACHINING & ASSOCIATED TESTING / INSPECTION FACILITIES

DIFFUSER LIGHT RED MK-I CELASTOID(TRANSLUCENT) AS PER DRG.NO. OS-14632, SIZE 130X158X0.76MM THICK, TOLERANCE-0.15MM

DIFFUSER LIGHT RED MK-I CELASTOID(TRANSLUCENT) AS PER DRG.NO. OS-14632, SIZE 130X158X0.76MM THICK, TOLERANCE-0.15MM

OS-14632

• N/A

• N/A

PTFE TAPE., OLF/EPS/SPEC/PTFE-01, L.F.NO.9001111645

PTFE TAPE., OLF/EPS/SPEC/PTFE-01, L.F.NO.9001111645

• PACKING MATERIAL

• PACKING MATERIAL

TEFLON TAPE LF NO 9001111636

TEFLON TAPE LF NO 9001111636

• PACKING MATERIAL

• PACKING MATERIAL

VARNISHED GLASS CLOTH LSKL -155 LF NO 7445111558

VARNISHED GLASS CLOTH LSKL- 155 LF NO 7445111558

• PACKING MATERIAL

• PACKING MATERIAL

POLY BAG AIR TIGHT 200X200 MM LF NO 2103101181

POLY BAG AIR TIGHT 200X200 MM LF NO 2103101181

• PACKING MATERIAL

• PACKING MATERIAL

Specn IS/170-2004Fourt revi with purity percent by mass mini 99%

Specn IS/170-2004Fourt revi with purity percent by mass mini 99%

• MSME

• Specn No. IS / 170-2004 (Latest Revision )

BUTT TO DRG NO 30P 5011 REQD FOR 40mm MGL

BUTT TO DRG NO 30P 5011 REQD FOR 40mm MGL

30P 5011

• FIRMS INSPECTION FACILITY TO PRODUCE THE COMPONENT AS PER OFT DRAWING AND QUALITY MONITORING FOR INSPECTION
• MECHANICAL INCLUDING IMPACT TEST AND CHEMICAL REPORT FROM NABL CERTIFIED LAB FOR RAW MATERIAL

• FIRMS MANUFACTURING TECHNOLOGY TO PRODUCE THE COMPONENT AS PER OFT DRAWING AND QUALITY MONITORING FOR INSPECTION
• PROCESS AND QUALITY PLAN OF THE FIRM TO PRODUCE THE COMPONENT AS PER OFT DRAWING AND QUALITY MONITORING FOR INSPECTION

CRUDE BEES WAX AS PER SPECIFICATION NO. IS-1504-1996 REAFFIRMED 2014.

CRUDE BEES WAX AS PER SPECIFICATION NO. IS-1504-1996 REAFFIRMED 2014.

• MSME

• CRUDE BEES WAX AS PER SPECIFICATION NO. IS-1504-1996 REAFFIRMED 2014.

HOSE TOWING VEHICLE EMERGENCY LINE SERVICE LINE TO DRG.NO.2530-001006.

AS PER DRG

DRG. NO. 2530-001006.

• HOSE TOWING VEHICLE EMERGENCY LINE SERVICE LINE TO DRG.NO.2530-001006.

• HOSE TOWING VEHICLE EMERGENCY LINE SERVICE LINE TO DRG.NO.2530-001006.

9069112686 PLUG BLANKING DOUBLE IAN 280 SA

9069112686 PLUG BLANKING DOUBLE IAN 280 SA

• 9069112686 PLUG BLANKING DOUBLE IAN 280 SA

• 9069112686 PLUG BLANKING DOUBLE IAN 280 SA

SOCKET BLANKING PLUG ASSY A4/L75875

SOCKET BLANKING PLUG ASSY A4/L75875

• SOCKET BLANKING PLUG ASSY A4/L75875

• SOCKET BLANKING PLUG ASSY A4/L75875

PLUG BOF 5057569 184L7/0078

PLUG BOF 5057569 184L7/0078

• PLUG BOF 5057569 184L7/0078

• PLUG BOF 5057569 184L7/0078

SOCKET BLANKING PLUG DRG IAN 284 SA S4/L7/5828

SOCKET BLANKING PLUG DRG IAN 284 SA S4/L7/5828

• SOCKET BLANKING PLUG DRG IAN 284 SA S4/L7/5828

• SOCKET BLANKING PLUG DRG IAN 284 SA S4/L7/5828

OUTER CASE LEFT ASSYEMBLY TO DRG NO 2010541/3020061

OUTER CASE LEFT ASSYEMBLY TO DRG NO 2010541/3020061

• OUTER CASE LEFT ASSYEMBLY TO DRG NO 2010541/3020061

• OUTER CASE LEFT ASSYEMBLY TO DRG NO 2010541/3020061

OUTER CASE RIGHT ASSYEMBLY TO DRG 164L7 0022 / 194DL 0248

OUTER CASE RIGHT ASSYEMBLY TO DRG 164L7 0022 / 194DL 0248

• OUTER CASE RIGHT ASSYEMBLY TO DRG 164L7 0022 / 194DL 0248

• OUTER CASE RIGHT ASSYEMBLY TO DRG 164L7 0022 / 194DL 0248

4 Core Multimode Armoured Cable, Make: D-Link Part No: NCB-FM6 20-AULS-04

4 Core Multimode Armoured Cable, Make: D-Link Part No: NCB-FM6 20-AULS-04

D Link Part No NCB FM6 20 AULS 04

• Optic Fiber Manufacturing – Fiber Drawing, Stranding of Fiber – Tight Buffering & Stranding, Protective Jacketing - Cable Sheath /Jacket Extrusion

• OTDR (Optical Time Domain Reflectometer) meter required for measuring point of defects, Attenuation, Bandwidth, Cut off wave length etc.

RANGE PLATE RH TO DRG NO 30P 4009 st 2 REQUIRED FOR 40mm MGL

As per Drawing and specification

30P 4009*2

• FIRMS MANUFACTURING TECHNOLOGY TO PRODUCE THE COMPONENT AS PER OFT DRAWING AND QUALITY MONITORING FOR INSPECTIO
• PROCESS AND QUALITY PLAN OF THE FIRM TO PRODUCE THE COMPONENT AS PER OFT DRAWING AND QUALITY MONITORING FOR INSPECTION

• FIRMS INSPECTION FACILITY TO PRODUCE THE COMPONENT AS PER OFT DRAWING AND QUALITY MONITORING FOR INSPECTION
• MECHANICAL INCLUDING IMPACT TEST AND CHEMICAL REPORT FROM NABL CERTIFIED LAB FOR RAW MATERIAL

20mm Bolt Assembly to Drg. No. 44P 03000* required for AMR (LF. No. 2028423000),

20mm Bolt Assembly to Drg. No. 44P 03000* required for AMR (LF. No. 2028423000),

44P 03000*

• machining process

• OFT

Forging for pre machining for Rear Cross

Forging for pre machining for Rear Cross

30C 3011 002 A4

• FIRMS MANUFACTURING TECHNOLOGY TO PRODUCE THE COMPONENT AS PER OFT DRAWING AND QUALITY MONITORING FOR INSPECTION
• PROCESS AND QUALITY PLAN OF THE FIRM TO PRODUCE THE COMPONENT AS PER OFT DRAWING AND QUALITY MONITORING FOR INSPECTION

• FIRMS INSPECTION FACILITY TO PRODUCE THE COMPONENT AS PER OFT DRAWING AND QUALITY MONITORING FOR INSPECTION
• MECHANICAL INCLUDING IMPACT TEST AND CHEMICAL REPORT FROM NABL CERTIFIED LAB FOR RAW MATERIAL

forging for pre machining of front frame

forging for pre machining of front frame

30C 1104 002 A3

• FIRMS MANUFACTURING TECHNOLOGY TO PRODUCE THE COMPONENT AS PER OFT DRAWING AND QUALITY MONITORING FOR INSPECTION

• FIRMS INSPECTION FACILITY TO PRODUCE THE COMPONENT AS PER OFT DRAWING AND QUALITY MONITORING FOR INSPECTION

Front Frame Forging for Front Frame as per drawing

Front Frame Forging for Front Frame as per drawing

30C 1104 001 A3

• FIRMS MANUFACTURING TECHNOLOGY TO PRODUCE THE COMPONENT AS PER OFT DRAWING AND QUALITY MONITORING FOR INSPECTION
• PROCESS AND QUALITY PLAN OF THE FIRM TO PRODUCE THE COMPONENT AS PER OFT DRAWING AND QUALITY MONITORING FOR INSPECTION

• FIRMS INSPECTION FACILITY TO PRODUCE THE COMPONENT AS PER OFT DRAWING AND QUALITY MONITORING FOR INSPECTION
• MECHANICAL INCLUDING IMPACT TEST AND CHEMICAL REPORT FROM NABL CERTIFIED LAB FOR RAW MATERIAL

WEBBING NYLON BLUE OF SIZES – 48 MM, 38MM & 25MM

WEBBING NYLON BLUE OF SIZES (FOR COMBINATION HARNESS-CHEST& SIT) ONE SET CONSISTING OF (1) WEBBING NYLON THICK 48MM WIDE BLUE - 7.00 MTR (2) WEBBING NYLON THIN 38MM WIDE BLUE - 4.70 MTR (3) WEBBING NYLON THIN 25MM WIDE BLUE - 1.15 MTR DMSRDE/T&GS/93/411(b) AND IN APPEARANCE, SHADE, FINISH ANDDM IN OTHER RESPECTS NOT DEFINED IN SPECIFICATION, THE MATERIAL SHALL CONFORM TO THE CORRESPONDING SEALED PATTERN HELD IN CUSTODY OF THE CONTROLLER, CQA(T&C), KANPUR 1.EACH WEBBING TO BE SUPPLIED IN ROLL FORM i.e.MULTIPLE OF SCALE X SET+5MTR FOR TESTING 2. MIN. ROLL LENGTH IS 100MTR FOR EACH WEBBING ) 3. ALL THE THREE WEBBING SHOULD BE OF SAME SHADE.

• As Per Specification/Drawing

• As Per Specification/Drawing

MANUFACTURING, SUPPLY INSTALLATION AND PROVING OF TEST STAND TO DRG. NO. ADK:9699-5751 FOR TURRET TRAVERSE MECHANISM (DRG. NO.: 176.23CB-3CB) AS PER SCOPE OF WORK ATTACHED.

DRG. NO. ADK:9699-5751 AND SCOPE OF WORK ATTACHED

DRG. NO. ADK:9699-5751

• AS PER DRG AND SCOPE OF WORK ATTACHED

• AS PER DRG ATTACHED AND SCOPE OF WORK ATTACHED

CONVERSION FORGING DRG.No. 64C 1026 200 E3 REQUIRED FOR HOLDER C1026

AS PER DRG TO CONVERSION FORGING DRG.No. 64C 1026 200 E3 REQUIRED FOR HOLDER C1026

C1026

• As per OFT requirements

• As per OFT requirements

INVESTMENT CASTING TO DRG No 64C 1024 250 H3

AS PER DRG TO INVESTMENT CASTING TO DRG No 64C 1024 250 H3

64C 1024 250 H3

• As per OFT requirements.

• As per OFT requirement

ELECTRICAL TRIGGER ASSEMBLE SOLENOID TRIGGER ASSEMBLY TO DRG NO cd12/6n7 65P 11300

ELECTRICAL TRIGGER ASSEMBLE SOLENOID TRIGGER ASSEMBLY TO DRG NO cd12/6n7 65P 11300

65P 11300

• As per Drawing

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE & SQAE

INVESTMENT CASTING FOR BOARD LF 9927099227

INVESTMENT CASTING FOR BOARD LF 9927099227

T-02/IC/8070001/246 M1

• MECHANICAL COMPONENT

• MECHANICAL COMPONENT

BODY CASTINGFOR BODY Y7410670 LF 9927097823

BODY CASTINGFOR BODY Y7410670 LF 9927097823

B-23/IC/7410670/202 M1

• MECHANICAL COMPONENT

• MECHANICAL COMPONENT

INVESTMENT CASTING CARRIER LF 9927095563

INVESTMENT CASTING CARRIER LF 9927095563

B-23/IC/6210483/065 M1

• MECHANICAL COMPONENT

• MECHANICAL COMPONENT

JOURNAL LF 9927094274

JOURNAL LF 9927094274

T-02/IC/8216003/122 M1

• MECHANICAL COMPONENT

• MECHANICAL COMPONENT

INVESTMENT CASTING HOLDER LF 9927090647

INVESTMENT CASTING HOLDER LF 9927090647

B-23/IC/6467289/084 M1

• MECHANICAL COMPONENT

• MECHANICAL COMPONENT

INVESTMENT CASTING BRACKET LF 9927090547

INVESTMENT CASTING BRACKET LF 9927090547

B-21/IC/8080113/138 M1

• MECHANICAL COMPONENT

• MECHANICAL COMPONENT

JOURNAL LF 9927079951

JOURNAL LF 9927079951

T-02IC/8216001/118 M2

• MECHANICAL COMPONENT

• MECHANICAL COMPONENT

GUIDE LF 9927079746

GUIDE LF 9927079746

B-23/IC/6228376/225

• MECHANICAL COMPONENT

• MECHANICAL COMPONENT

INVESTMENT CASTING CAM LF 9927068918

INVESTMENT CASTING CAM LF 9927068918

T-01/IC/8360133/168 M2

• MECHANICAL COMPONENT

• MECHANICAL COMPONENT

INVESTMENT CASTING CARRIAGE LF 9927068831

INVESTMENT CASTING CARRIAGE LF 9927068831

T-01/IC/8060148/193M4

• MECHANICAL COMPONENT

• MECHANICAL COMPONENT

FLANGE LF 9927064109

FLANGE LF 9927064109

T-02/IC/8230098/45 M1

• MECHANICAL COMPONENT

• MECHANICAL COMPONENT

BODY CASTING IC 309 M1 LF 7526030901

BODY CASTING IC 309 M1 LF 7526030901

BODY CASTING IC/60/309 M1

• MECHANICAL COMPONENT

• MECHANICAL COMPONENT

HOLDER CASTING LF 7526030701

HOLDER CASTING LF 7526030701

IC/60/307

• MECHANICAL COMPONENT

• MECHANICAL COMPONENT

HOLDER CASTING LF 7526030600

HOLDER CASTING LF 7526030600

IC/60/306 M1

• MECHANICAL COMPONENT

• MECHANICAL COMPONENT

BRACKET CASTING IC/60/301 LF 7526030101

BRACKET CASTING IC/60/301 LF 7526030101

IC/60/301

• MECHANICAL COMPONENT

• MECHANICAL COMPONENT

INVESTMENT CASTING BODY LF 7525141100

INVESTMENT CASTING BODY LF 7525141100

IC/510205/8021702/411 M1

• MECHANICAL COMPONENT

• MECHANICAL COMPONENT

INVESTMENT CASTING CLAMP LF 7522111500

INVESTMENT CASTING CLAMP LF 7522111500

B-21/IC/8667787/115 M1

• MECHANICAL COMPONENT

• MECHANICAL COMPONENT

INVESTMENT CASTING BRACKET LF 7522109400

INVESTMENT CASTING BRACKET LF 7522109400

B-21/IC/8080082/094 M1

• MECHANICAL COMPONENT

• MECHANICAL COMPONENT

CASTING HANDLE LF NO 7520203900

CASTING HANDLE LF NO 7520203900

T-02/IC/8333021/039 M1

• MECHANICAL COMPONENT

• MECHANICAL COMPONENT

CASTING HANDLE LF NO 7515140700

CASTING HANDLE LF NO 7515140700

IC/510204/407

• MECHANICAL COMPONENT

• MECHANICAL COMPONENT

JUNCTION BOX SS 304 EX ENCLOSURE 200 X 250 X 121MM Qty 32 nos AND JUNCTION BOX SS304 EX ENCLOSURE 330X300X121MM Qty 48 nos AND JUNCTION BOX SS 304 EX ENCLOSURE 200 X 250 X 121MM Qty 64 nos (Detailed Description attached in Specification File)

JUNCTION BOX SS 304 EX ENCLOSURE 200 X 250 X 121MM Qty 32 nos AND JUNCTION BOX SS304 EX ENCLOSURE 330X300X121MM Qty 48 nos AND JUNCTION BOX SS 304 EX ENCLOSURE 200 X 250 X 121MM Qty 64 nos (Detailed Description attached in Specification File)

• Material Forming - Bending and Shearing Material Removal - Drilling and Grinding Material Joining - Welding

• 1) For checking and continuity and short circuit test by multi meter. 2) For Insulation testing between connector to connector, Body to connector Insulation tester required

RIM TO PART NO 3049494

RIM TO PART NO 3049494

• AS PER TENDER DOCUMENT

• AS PER TENDER DOCUMENT

BARREL AFTER HONNING

BARREL AFTER HONNING, AS PER DRAWING AND QUALITY MONITORING FOR INSPECTION

TEND 2628

• FIRMS MANUFACTURING TECHNOLOGY TO PRODUCE THE COMPONENT AS PER OFT DRAWING AND QUALITY MONITORING FOR INSPECTION

• FIRMS INSPECTION FACILITY TO PRODUCE THE COMPONENT AS PER OFT DRAWING AND QUALITY MONITORING FOR INSPECTION
• MECHANICAL INCLUDING IMPACT TEST AND CHEMICAL REPORT FROM NABL CERTIFIED LAB FOR RAW MATERIAL

Net Fabric Polyester 76 Gms. 20 Kgf BS For Width 120 cms +2 -0 cm excluding selvedge

SPEC NO. ADRDE/QMS/TDTM/F/2009/03(a), DT. 17-05-2021.

• As per Specification/Drawing

• As per Specification/Drawing

P B ROUND ROD TO SIZE95MM DIA IN STD LENGTH TO SPECN IS 7811 1985

P B ROUND ROD TO SIZE95MM DIA IN STD LENGTH TO SPECN IS 7811 1985

• As per tender document annexure L

• As per tender document annexure L

Forging Strip C1005

As per Drawings

• As per Drawings

• Firm's own facility to meet OFT requirements.

STEEL SQR.75 MM TO SPECN.BS:3S144:1995(1999) GD.S144 D, TEST CONDITION S144H.

STEEL SQR.75 MM TO SPECN.BS:3S144:1995(1999) GD.S144 D, TEST CONDITION S144H.

• As per tender document Annexure L

• As per tender document Annexure L

20mm Bolt Assembly to Drg. No. 44P 03000* required for AMR (LF. No. 2028423000),

20mm Bolt Assembly to Drg. No. 44P 03000* required for AMR (LF. No. 2028423000),

44P 03000*

• machining process

• OFT

SUPPLY OF PREMACHINED BLANK S 2 TO DRG NO TEND 2607 STAR 5 WITH OFT SUPPLIED MATERIAL REQUIRED FOR K 3001STAR4 FIXED BUTT FOR TAR

AS PER DRG NO. TEND 2607 STAR 5 WITH OFT MATERIAL

K 3001 STR 4

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

FORGING TO DRG No 62C 7003 200 B3 WITH FIRM'S MATERIAL REQUIRED FOR SEAR A7003 FOR 127 AD GUN

FORGING TO DRG No 62C 7003 200 B3 WITH FIRM'S MATERIAL REQUIRED FOR SEAR A7003 FOR 127 AD GUN

62C 7003 200 B3

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT BY THE REPRESENTATIVE OF THE GENERAL MANAGER ON RECEIPT OF MATERIAL AT OFT STORE

CONVERSION FORGING TO DRAWING NO. 62C 2206 200 D2 REQUIRD FOR BLOCK TRUNNION (A2206) FOR 12.7 mm AD GUN. MATERIAL WILL BE ISSUED BY OFT

CONVERSION FORGING TO DRAWING NO. 62C 2206 200 D2 REQUIRD FOR BLOCK TRUNNION (A2206) FOR 12.7 mm AD GUN. MATERIAL WILL BE ISSUED BY OFT

62C 2206 200 D2

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT BY THE REPRESENTATIVE OF THE GENERAL MANAGER AT OFT

"CONVERSION FORGING TO DRAWING NO. 62C 6018 200 D3 REQUIRED FOR PLATE RIBBED GUIDE SLIDE (A6018) FOR 12.7 mm AD GUN. MATERIAL WILL BE ISSUED BY OFT. "

CONVERSION FORGING TO DRAWING NO. 62C 6018 200 D3 REQUIRED FOR PLATE RIBBED GUIDE SLIDE (A6018) FOR 12.7 mm AD GUN. MATERIAL WILL BE ISSUED BY OFT. "

62C 6018 200 D3

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT BY THE REPRESENTATIVE OF THE GENERAL MANAGER ON RECEIPT OF MATERIAL AT OFT STORE

"CONVERSION FORGING TO DRG.NO. 62C 6208 200 C3. MATERIAL WILL BE ISSUED BY OFT FOR SLIDE FEED (A6208) "

AS PER DRG OF "CONVERSION FORGING TO DRG.NO.: 62C 6208 200 C3. MATERIAL WILL BE ISSUED BY OFT FOR SLIDE FEED (A6208). "

62C 6208 200 C3

• As per drawing

• INSPECTION WILL BE CARRIED OUT BY THE REPRESENTATIVE OF THE GENERAL MANAGER ON RECEIPT OF MATERIAL AT OFT STORE

PR DIE CASTING FOR LOOP LF NO 9927098819

PR DIE CASTING FOR LOOP LF NO 9927098819

B-21/DC/8660109/119

• MECHANICAL COMPONENT

• MECHANICAL COMPONENT

DIE CASTING FLANGE LF NO 9927095520

DIE CASTING FLANGE LF NO 9927095520

B-21/DC/8230400-01/147

• MECHANICAL COMPONENT

• MECHANICAL COMPONENT

HOLDER LF NO 9927092201

HOLDER LF NO 9927092201

T-04/DC/8637366/047 M2

• MECHANICAL COMPONENT

• MECHANICAL COMPONENT

PR DIE CASTING COVER LF NO 9927091070

PR DIE CASTING COVER LF NO 9927091070

T-01/DC/8040414/228 M2

• MECHANICAL COMPONENT

• MECHANICAL COMPONENT

BODY CASTING TO DRG NO DC/70634000001/599 (LF 7516959900)

BODY CASTING TO DRG NO DC/70634000001/599 (LF 7516959900)

• MECHANICAL COMPONENT

• MECHANICAL COMPONENT

DIE CASTING MANDREL LF NO 7512412200

DIE CASTING MANDREL LF NO 7512412200

B-24/DC/8637232/122

• MECHANICAL COMPONENT

• MECHANICAL COMPONENT

DIE CASTING AXLE WITH BRACKET LF NO 7511903700

DIE CASTING AXLE WITH BRACKET LF NO 7511903700

T-19/DC/6300001/037 M1

• MECHANICAL COMPONENT

• MECHANICAL COMPONENT

CORDAGE NYLON BRAIDED 250 KG OLIVE DRAB SHADE NO. 298 AS PER SPECN NO. IS:5-1994

Specn. No. IS : 4227-1998 Variety No. 12 Except that:- Parameters Linear Density of Yarn(Tex) Mass (g/100m) Tolerance -5% to +17% +5% over specified For Dyed i.e.698, max ROLL LENGTH 285 MTR. EX-SAMPLING

• As Per Specification/Drawing

• As Per Specification/Drawing

Fabrication of SD Para Pack Cover

Fabrication of SD Para Pack Cover is as per Specn. No. IND/TC/2694 with amendment 1, 2 & 3

• As Per Specification/Drawing

• As Per Specification/Drawing

Fabrication of Carrying Bag PTAM

As per Drawing/Tech Particulars attached

• As Per Specification/Drawing

• As Per Specification/Drawing