Guide Plunger Butt Lock DRG No.0204-03-04-00-03-003-00DA for JVPC 5.56mm (MIM Route)

Guide Plunger Butt Lock DRG No.0204-03-04-00-03-003-00DA for JVPC 5.56mm (MIM Route)

0204-03-04-00-03-003-00DA

• MIM ROUTE

• 1) Chemical & Mechanical properties as per std. given drawing /Specification.
• 2) Dimensional inspection for all dimension given in the drawing & other parameter which are mentioned in relevant drawing/specification.

Wheel Rear Sight DRG No.0204-03-04-00-01-003-00DA for JVPC 5.56mm (MIM Route)

Wheel Rear Sight DRG No.0204-03-04-00-01-003-00DA for JVPC 5.56mm (MIM Route)

DRG No. 0204-03-04-00-01-003-00DA

• MIM

• 1-Chemical & Mechanical properties as per std.given drawing
• 2-Dimensional Inspection, for all dimensions given in the drawing & other Parameter which are mentioned in relevant drawing.

AS PER PARTICULARS: WIDTH: 36/(+2/-0)MM THICKNESS: 4.0MM(MAX MASS/MTR.:78GM(MAX). BREAKING STRENGTH: 2900KG(MIN) CONSTRUCTION OF YARN: WARP- 96.3X3 ie.96.3/1X3 TEX X FOLD: WEFT - 15.7X9. ENDS IN FULL WIDTH: 219 PICKS/DM: 66( BOTHLAYERS). TPM(RANGE):EARP-188-196, WEFT - 168-196. ELONGATION : 18-25%. WEAVE : TUBULAR PLAIN (3 ENDS WORKING AS ONE). HEAT SETTING : TAPE TUBULAR SHOULD HAVE PROPER HEAT SETTING.

AS PER PARTICULARS: WIDTH: 36/(+2/-0)MM THICKNESS: 4.0MM(MAX MASS/MTR.:78GM(MAX). BREAKING STRENGTH: 2900KG(MIN) CONSTRUCTION OF YARN: WARP- 96.3X3 ie.96.3/1X3 TEX X FOLD: WEFT - 15.7X9. ENDS IN FULL WIDTH: 219 PICKS/DM: 66( BOTHLAYERS). TPM(RANGE):EARP-188-196, WEFT - 168-196. ELONGATION : 18-25%. WEAVE : TUBULAR PLAIN (3 ENDS WORKING AS ONE). HEAT SETTING : TAPE TUBULAR SHOULD HAVE PROPER HEAT SETTING.

PRISM TO DRG.NO.:MCT-2551/3

PRISM TO DRG.NO.:MCT-2551/3

PRISM TO DRG.NO.:MCT-2551/3

FABRIC NYLON 35 GSM WIDTH 94 CM OG

ADRDE/QMS/TDTM/SPECN/98

FABRIC NYLON 35 GSM WIDTH 94 CM SAND COLOR

ADRDE/QMS/TDTM/SPECN/98.

FABRIC NYLON 35 GSM WIDTH 94 CM ORANGE

ADRDE/QMS/TDTM/SPECN/98.

FABRIC NYLON 35 GM U/D WIDTH 94 CM

AS PER SPECIFICATION

SHACKLE WITH NUT AND BOLT (BLACK)

DRG. NO. ADRDE/ 1348-G (b)

DRG. NO. ADRDE/ 1348-G (b)

FIRING PIN AS PER DRG No. K 2015 WITH FIRM'S MATERIAL

AS PER DRG No. K 2015 WITH FIRM'S MATERIAL

K 2015

• AS PER DRAWING ATTACHED

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

SUPPLY OF HAMMER AS PER DRG NO K 2061 STAR2 WITH FIRMS MATERIAL

SUPPLY OF HAMMER AS PER DRG NO K 2061 STAR2 WITH FIRMS MATERIAL

K 2061 STAR2

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

SPECN.NO. PROV.IND/TC/1550 & ATTACHED RELEVANT DRAWINGS

SPECN.NO. PROV.IND/TC/1550 & ATTACHED RELEVANT DRAWINGS

AS PER REQUIREMENT & SPECIFICATION

AS PER REQUIREMENT & SPECIFICATION

BUCKLE ALUMN. ALLOY Q.R. 19MM BLACK ANODISED

AS PER DRG. NO. SK-886 AND CQA(GS)/US/324 (5653/PK).

DEES STEEL 350MMX230MMX6.3MM

CQA (GS)/US/426(a)EXCEPT SIZE (5757/PK) GALVANISED

BUCKLE SERRATED (ALUMINIUM FOR BELT WAIST OF SYNTHETIC WEB EQUIPMENT

AS PER DRG NO SK-853,854 (FOR ALUMINIUM ALLOY SHEET 1.5

BUCKLE BRASS 25MM W.E.

SPECN. NO. IND/GS/1541 (5627/PK)

BUCKLE ALUMN. ALLOY 25MM BLACK ANODISED

AS PER DRG. NO. 856 (CQA(GS)/US/324 & ATTACHED RELEVANT DRG)

IS:5041-2001 (LATEST) AND SUPPL. SCHEDULE NO CQA(GS)/SS/336

IS:5041-2001 (LATEST) AND SUPPL. SCHEDULE NO CQA(GS)/SS/336

PRESS BUTTON BRASS NICKLE COATED

AS PER SPECIFICATION

IS:5966-1976 & SUPPL. SCHEDULE NO. CIGS/SS/320

IS:5966-1976 & SUPPL. SCHEDULE NO. CIGS/SS/320

AS PER REQUIREMENT & SPECIFICATION

AS PER REQUIREMENT & SPECIFICATION

IND/GS/1328 (c) (5541/PK DT. 28.03.03)

IND/GS/1328 (c) (5541/PK DT. 28.03.03)

AS PER REQUIREMENT & SPECIFICATION

AS PER REQUIREMENT & SPECIFICATION

BAMBOO MALE/ SEASONED/ POLE VARIOUS

A P REQ

AS PER REQUIREMENT & SPECIFICATION

AS PER REQUIREMENT & SPECIFICATION

AS PER REQUIREMENT & SPECIFICATION

AS PER REQUIREMENT & SPECIFICATION

AS PER REQUIREMENT & SPECIFICATION

AS PER REQUIREMENT & SPECIFICATION

QUICK RELEASE UNIT

SPECN.NO.: ADRDE/1369(a) DRD/26/98.

• AS PER SPECIFICATION/DRAWING

• AS PER SPECIFICATION/DRAWING

DRG. NO.ADRDE/1041A-2/SA-1

DRG. NO.ADRDE/1041A-2/SA-1

DRG. NO.ADRDE/1041A-2/SA-1

PRISM, OPTICAL INSTRUMENT AS PER DRG. NO. IRDE-2023/9 FOR GNVP & L/W BINO

PRISM, OPTICAL INSTRUMENT AS PER DRG. NO. IRDE-2023/9 FOR GNVP & L/W BINO

DRG. NO. IRDE-2023/9

CASE CANVAS TO DRG NO.MCT-1682/1 MCT-1682/1 NOTE:EACH CANVAS CASE WILL BE SUPPLIED IN GOOD QUALITY OF POLYTHENE BAG (INDIVIDULLY)

CASE CANVAS TO DRG NO.MCT-1682/1 MCT-1682/1 NOTE:EACH CANVAS CASE WILL BE SUPPLIED IN GOOD QUALITY OF POLYTHENE BAG (INDIVIDULLY)

DRG NO.MCT-1682/1 MCT-1682/1 NOTE:EACH CANVAS CASE WILL BE SUPPLIED IN GOOD QUALITY OF POLYTHENE BAG (INDIVIDULLY)

CASE, ARTILLERY AND MAP BOARDS, MK 2 AS PER DRG.NO.: O.S.30986(17 SHEETS)

CASE, ARTILLERY AND MAP BOARDS, MK 2 AS PER DRG.NO.: O.S.30986(17 SHEETS)

DRG.NO.: O.S.30986(17 SHEETS)

CASE CARRYING FRP FOR SIGHT NIGHT VISION PASSIVE 5.56MM RIFLE(INSAS)101A DRG.NO. MCT-1678/2 COMPLETE WITH DRG MCT-1679/1,MCT-1680/1MCT1637/1,MCT-1646/1 MCT-2007.MCT-2008,MCT-2546/1,MCT-2548/1,MCT- 1644/1,1636/1,1617/1,MCT-1369,1370,1375,1376 MCT-1380,& MCT-1641/1.

CASE CARRYING FRP FOR SIGHT NIGHT VISION PASSIVE 5.56MM RIFLE(INSAS)101A DRG.NO. MCT-1678/2 COMPLETE WITH DRG MCT-1679/1,MCT-1680/1MCT1637/1,MCT-1646/1 MCT-2007.MCT-2008,MCT-2546/1,MCT-2548/1,MCT- 1644/1,1636/1,1617/1,MCT-1369,1370,1375,1376 MCT-1380,& MCT-1641/1.

DRG.NO. MCT-1678/2 COMPLETE WITH DRG MCT-1679/1,MCT-1680/1MCT1637/1,MCT-1646/1 MCT-2007.MCT-2008,MCT-2546/1,MCT-2548/1,MCT- 1644/1,1636/1,1617/1,MCT-1369,1370,1375,1376 MCT-1380

SET OF OPTICS OF L/W BINO CONSISTING OF FOLLOWING: (1) LENS NO.I DRG.NO.IRDE-2001/5,1/SET, (2) LENS NO. II & III DRG.IRDE-2001/3, 1/SET,(3) LENS NO.IV & V DRG.NO. IRDE-2001/9, 1/SET,(4) LENS NO.VI IRDE-2001/12,1/SET, (5)LENS NO.IX DRG. IRDE-2023/6,1/SET(6) LENS NO.X DRG. IRDE-2023/7,2/SET(7)LENS XI & XII DRG.IRDE-2023/8, 2/SET (7)REFLECTOR, LIGHT DRG.IRDE-2023/10 SHT 2 OF 3, 2/SET

SET OF OPTICS OF L/W BINO CONSISTING OF FOLLOWING: (1) LENS NO.I DRG.NO.IRDE-2001/5,1/SET, (2) LENS NO. II & III DRG.IRDE-2001/3, 1/SET,(3) LENS NO.IV & V DRG.NO. IRDE-2001/9, 1/SET,(4) LENS NO.VI IRDE-2001/12,1/SET, (5)LENS NO.IX DRG. IRDE-2023/6,1/SET(6) LENS NO.X DRG. IRDE-2023/7,2/SET(7)LENS XI & XII DRG.IRDE-2023/8, 2/SET (7)REFLECTOR, LIGHT DRG.IRDE-2023/10 SHT 2 OF 3, 2/SET

ENGRAVING OF SCALE ARTILLERY AS PER DRG. NO.CIA (OS) 564. BLANK WILL BE SUPPLIED BY OFD (FIRM SHOULD SUPPLY THE ITEM WITH PROPER PACKING TO AVOID SCRATCHES)

ENGRAVING OF SCALE ARTILLERY AS PER DRG. NO.CIA (OS) 564. BLANK WILL BE SUPPLIED BY OFD (FIRM SHOULD SUPPLY THE ITEM WITH PROPER PACKING TO AVOID SCRATCHES)

FABRIC RAYON ORANGE 107 CM

SPECN-ADRDE/SPECN/1983/16

FABRIC NYLON 42 GM LOW POROSITY RIP STOP WEAVE SKY BLUE 120 CM

ADRDE/SPECN/73(a)

ADRDE/SPECN/73(a)

P. GLASS (FINISHED) (LF-9927097819)

AS PER DRAWING NO. BL 8640375

PLATE FOR PROTECTIVE GLASS EAZHU AS PER DRG. NO. 755482.96 (ATS8640394)

PLATE FOR PROTECTIVE GLASS EAZHU AS PER DRG. NO. 755482.96 (ATS8640394)

755482.96 (ATS8640394)

PROTECTIVE GLASS ASSY OF HEAD AS PER DRG. NO. AL5948015

PROTECTIVE GLASS ASSY OF HEAD AS PER DRG. NO. AL5948015

AL5948015

SAFETY GLASS AS PER DG. NO. BL8640376

SAFETY GLASS AS PER DG. NO. BL8640376

BL8640376

PROTECTIVE GLASS (LF-2690000039)

AS PER DRAWING NO. BSH8640132

PROTECTIVE GLASS (LF-2690000035)

AS PER DRAWING NO. AF8640078

PROTECTIVE GLASS (LF-2690000034)

AS PER DRAWING NO. AF8640077

PROTECTIVE GLASS FOR PZU-7 (LF-2612817444)

AS PER DRAWING NO. U7197488

PROTECTIVE GLASS (LF-2612817442)

AS PER DRAWING NO. U7168653

PLASTIC SLIDE FASTENER LIGHT DUTY CLOSE END AUTO LOCK OG 22 CM SPECIFICATION : IS:14181-2002 (REAFFIRMED -2013)PART 01 TO 03

PLASTIC SLIDE FASTENER LIGHT DUTY CLOSE END AUTO LOCK OG 22 CM SPECIFICATION : IS:14181-2002 (REAFFIRMED -2013)PART 01 TO 03

PLASTIC SLIDE FASTENER LIGHT DUTY CLOSE END AUTO LOCK OG 20 CM SPECIFICATION : IS:14181-2002 (REAFFIRMED -2013)PART 01 TO 03

PLASTIC SLIDE FASTENER LIGHT DUTY CLOSE END AUTO LOCK OG 20 CM SPECIFICATION : IS:14181-2002 (REAFFIRMED -2013)PART 01 TO 03

PLASTIC SLIDE FASTENER LIGHT DUTY CLOSE END AUTO LOCK OG 18 CM SPECIFICATION : IS:14181-2002 (REAFFIRMED -2013)PART 01 TO 03

PLASTIC SLIDE FASTENER LIGHT DUTY CLOSE END AUTO LOCK OG 18 CM SPECIFICATION : IS:14181-2002 (REAFFIRMED -2013)PART 01 TO 03

Mechanised stainless steel metal hooks and Clips with Base (press type) (item Code 1506420449)with specification : Mechanised stainless( steel metal hooks and Clips with Base (Press type) OPF Drawing No.OPF/CLO/IAF/TRS/01

Mechanised stainless steel metal hooks and Clips with Base (press type) (item Code 1506420449)with specification : Mechanised stainless( steel metal hooks and Clips with Base (Press type) OPF Drawing No.OPF/CLO/IAF/TRS/01

Synchro Resolver 2 5 watt with coupling assy to Drg No 1 88 94 026CBCB

Synchro Resolver 2 5 watt with coupling assy to Drg No 1 88 94 026CBCB

Drg No 1 88 94 026CBCB

REAR SIGHT BLOCK BLANK S3 AS PER DRG NO TEND 2509STR FOR K1202STR

REAR SIGHT BLOCK BLANK S3 AS PER DRG NO TEND 2509STR FOR K1202STR

K1202STR

STEEL WIRE 6 SWG DIA(4.877MM) IN COLD DRAWN AND ANNEALED CONDITION TO SPECN.IS:5517-1993GD.558 (EN-9)

STEEL WIRE 6 SWG DIA(4.877MM) IN COLD DRAWN AND ANNEALED CONDITION TO SPECN.IS:5517-1993GD.558 (EN-9)

STEEL WIRE 6 SWG DIA(4.877MM) IN COLD DRAWN AND ANNEALED CONDITION TO SPECN.IS:5517-1993GD.558 (EN-9)

STEEL ROUND DIA 6MM TO SPECN IS:5517-1993 GRADE 40 NI 6 CR 4 M03 (EN-24)

STEEL ROUND DIA 6MM TO SPECN IS:5517-1993 GRADE 40 NI 6 CR 4 M03 (EN-24)

STEEL ROUND DIA 6MM TO SPECN IS:5517-1993 GRADE 40 NI 6 CR 4 M03 (EN-24)

STEEL ROUND DIA 18MM TO SPECN IS:5517-1993 GRADE 40 NI 6 CR 4 M03 (EN-24)

STEEL ROUND DIA 18MM TO SPECN IS:5517-1993 GRADE 40 NI 6 CR 4 M03 (EN-24)

STEEL ROUND DIA 18MM TO SPECN IS:5517-1993 GRADE 40 NI 6 CR 4 M03 (EN-24)

STEEL ROD SIZE 15 MM SPECN TO IS:5517-1993, GD 55C8 (EN-9) FOR SLEEVE BUTTON CATCH MAGAZINE FOR JVPC 5.56MM

STEEL ROD SIZE 15 MM SPECN TO IS:5517-1993, GD 55C8 (EN-9) FOR SLEEVE BUTTON CATCH MAGAZINE FOR JVPC 5.56MM

STEEL ROD DIA 8MM STEEL TO IS:5517-1993 GD-40NI6CR4M03 BS:970, PT-1-1983 GD817M40 OR EN-24

STEEL ROD DIA 8MM STEEL TO IS:5517-1993 GD-40NI6CR4M03 BS:970, PT-1-1983 GD817M40 OR EN-24

STEEL ROD DIA 8MM STEEL TO IS:5517-1993,GD-42CR4M02 0R EN-19

STEEL ROD DIA 8MM STEEL TO IS:5517-1993,GD-42CR4M02 0R EN-19

STEEL ROD 4.0MM DIA TO SPECN STEEL BS 970 PT 1:1983 GRADE 835M30.

STEEL ROD 4.0MM DIA TO SPECN STEEL BS 970 PT 1:1983 GRADE 835M30.

• Melting and Rolling

• 1) Chemical & Mechanical properties as per std. given drawing 2) Dimensional inspection for all dimensions given in the drawing & other parameter which are mentioned in relevant drawing.

STEEL ROD 32.00MM DIA-0.1MM HOT ROLLED PEELED BAR IN EXACT LENGTH OF 760MM +2MM EACH PIECE TO SPECN.BS 970 PT:1:1983. GD 835 M15 WITH RESTRICTION OF S%=0.01 MAX,P%=0.015MA X,(S+P)%=0.022MAX,VACUAM DEGASED & DEVOID OF UNDESIRABLE ELEMENT AL.,V,W ETC. ACCEPTANCE CRITERIAS PER:QAINO.QA-1/QAI/15

STEEL ROD 32.00MM DIA-0.1MM HOT ROLLED PEELED BAR IN EXACT LENGTH OF 760MM +2MM EACH PIECE TO SPECN.BS 970 PT:1:1983. GD 835 M15 WITH RESTRICTION OF S%=0.01 MAX,P%=0.015MA X,(S+P)%=0.022MAX,VACUAM DEGASED & DEVOID OF UNDESIRABLE ELEMENT AL.,V,W ETC. ACCEPTANCE CRITERIAS PER:QAINO.QA-1/QAI/15

• Melting and Rolling

• 1) Chemical & Mechanical properties as per std. given drawing /Specification. 2) Dimensional inspection for all dimension given in the drawing & other parameter which are mentioned in relevant drawing/specification.

STEEL ROD 31+0.5/-0.0MM DIA.,IN CUT LENGTH OF 380+2.5/-0.0MM TO SPECN. JSS:9510-06-000,REV.3 CODE REF.B IN NORMALISED CONDITION. COMPOSITION RESTRICTED: S%=0.010MAX.,P%=0.015MAX.& (S+P)%=0.022MAX. FOR OTHER PARAMETERS AS PER QAI NO.: QA-1/QAI/14

STEEL ROD 31+0.5/-0.0MM DIA.,IN CUT LENGTH OF 380+2.5/-0.0MM TO SPECN. JSS:9510-06-000,REV.3 CODE REF.B IN NORMALISED CONDITION. COMPOSITION RESTRICTED: S%=0.010MAX.,P%=0.015MAX.& (S+P)%=0.022MAX. FOR OTHER PARAMETERS AS PER QAI NO.: QA-1/QAI/14

STEEL FLAT 36 MM X 62 MM BS: 970 PT-1 1983 GD. 835 M 15 OR EN- 39-B

STEEL FLAT 36 MM X 62 MM BS: 970 PT-1 1983 GD. 835 M 15 OR EN- 39-B

• Raw Material (as per specification)

• 1) Chemical & Mechanical properties as per std. given drawing. 2) Dimensional inspection for all dimension given in the drawing & other parameter which are mentioned in relevant specification..

ST. RD 8.23MM DIA TO SPECN. IS:4432 1988, GR 13NI13CR3 (EN-36B)

ST. RD 8.23MM DIA TO SPECN. IS:4432 1988, GR 13NI13CR3 (EN-36B)

ST WIRE SPG 1.25MM DIA SPECN. STEEL TO IS:4454 (PT-1)2001,DH

ST WIRE SPG 1.25MM DIA SPECN. STEEL TO IS:4454 (PT-1)2001,DH

St. Rod 6.35 mm dia to Specn. IS: 3748-1990 T90MN6WCR2 (Rod Cocking)

St. Rod 6.35 mm dia to Specn. IS: 3748-1990 T90MN6WCR2 (Rod Cocking)

St. Rd. 4.47MM dia to Specn. IS:5517-1993.GD-55CB(EN-9)(5 types of Pin)

St. Rd. 4.47MM dia to Specn. IS:5517-1993.GD-55CB(EN-9)(5 types of Pin)

St. Rod 3.25MM dia to Specn. IS:5517-1993.40CB(EN-8) (Pin St. Hdls. Cocking Bracket & Gas block)

St. Rod 3.25MM dia to Specn. IS:5517-1993.40CB(EN-8) (Pin St. Hdls. Cocking Bracket & Gas block)

SIZE SHEET THICKNESS 1.0MM,WIDTH& LENGTH IN STANDRED SIZE MATERIAL SPECIFICATION STEEL TO IS:7226-1974 GD C-40 FOR TWO PIECE CASE MAGAZINE TO DRG NO0204 03 0200 09 00100DE FOR JVPC

SIZE SHEET THICKNESS 1.0MM,WIDTH& LENGTH IN STANDRED SIZE MATERIAL SPECIFICATION STEEL TO IS:7226-1974 GD C-40 FOR TWO PIECE CASE MAGAZINE TO DRG NO0204 03 0200 09 00100DE FOR JVPC

SIZE SHEET THICKNESS 1.0MM,WIDTH& LENGTH IN STANDRED SIZE STEEL SHEET TO IS:513-1994,GD EDD FOR PLATE FORM DRG NO 0204 03 02 00 09 003 00DC FOR COMPONENT OF MAGAZINE FOR JVPC

SIZE SHEET THICKNESS 1.0MM,WIDTH& LENGTH IN STANDRED SIZE STEEL SHEET TO IS:513-1994,GD EDD FOR PLATE FORM DRG NO 0204 03 02 00 09 003 00DC FOR COMPONENT OF MAGAZINE FOR JVPC

LAMP TH 28 10 TY 16 535 853 79

TY 16 535 853 79

MULTI-PURPOSE REFLEX WEAPON SIGHT MAKE - BEL

MULTI-PURPOSE REFLEX WEAPON SIGHT MAKE - BEL

Screw Barrel Cover M5x20 for 5.56 MM as per IS: 1366

Screw Barrel Cover M5x20 for 5.56 MM as per IS: 1366

M5x20 for 5.56 MM as per IS: 1366

3 Point Sling for JVPC 5.56MM DRG.NO.204-04-03-00-00-000-00DA

3 Point Sling for JVPC 5.56MM DRG.NO.204-04-03-00-00-000-00DA

204-04-03-00-00-000-00DA

HOUSING SIGHT REAR FOR JVPC 5.56MM THROUGH MIM ROUTE DRG.NO.0204 03 02 15 28 003 00DD

HOUSING SIGHT REAR FOR JVPC 5.56MM THROUGH MIM ROUTE DRG.NO.0204 03 02 15 28 003 00DD

0204 03 02 15 28 003 00DD

LEFT BRACKET LF NO 7440206660

LEFT BRACKET LF NO 7440206660

GMIL5130

• mechanical component

• mechanical component

COMPLETE MACHINING OF BODY DC 402 LF NO 7576040200

COMPLETE MACHINING OF BODY DC 402 LF NO 7576040200

U6213097

MACHINING OF HOLDER IC 60 LF NO 7576030600

MACHINING OF HOLDER IC 60 LF NO 7576030600

U7335427

COMPLETE MACHINING OF COVER IC 302 LF NO 7576030200

COMPLETE MACHINING OF COVER IC 302 LF NO 7576030200

U6205481

COMPLETE MACHINING OF HOUSING IC 072 LF NO 7576007200

COMPLETE MACHINING OF HOUSING IC 072 LF NO 7576007200

U7334605