TARGET PLATE-15 CDV6 -STEEL FOR FLSC-10 15 CDV6-STEEL L= 350 MM W=75 MM THICKNESS 3.50 MM 0.20 MM -0.00 MM.COMP=C= 0.1TO 0.16,Mn=0.8TO1.1,Si=0.2,Ni=0.5,Cr1.25TO1.5,Mo=0.8 TO 1,V=0.2TO0.3,S=0.03 MAX,P=0.03 MAX.ULTIMATE TENSILE STRENGT H=95-100KG/MM2,HARDNESS=290 TO 313 BHN. SPECIFICATION ARE IND/ME/911:2015 DC NO. 5433-ME Dt 18.04.2016
Specification
TARGET PLATE-15 CDV6 -STEEL FOR FLSC-10 15 CDV6-STEEL L= 350 MM W=75 MM THICKNESS 3.50 MM 0.20 MM -0.00 MM.COMP=C= 0.1TO 0.16,Mn=0.8TO1.1,Si=0.2,Ni=0.5,Cr1.25TO1.5,Mo=0.8 TO 1,V=0.2TO0.3,S=0.03 MAX,P=0.03 MAX.ULTIMATE TENSILE STRENGT H=95-100KG/MM2,HARDNESS=290 TO 313 BHN. SPECIFICATION ARE IND/ME/911:2015 DC NO. 5433-ME Dt 18.04.2016
TARGET PLATE-15 CDV6 -STEEL FOR FLSC-10 15 CDV6-STEEL L= 350 MM W=75 MM THICKNESS 3.50 MM 0.20 MM -0.00 MM.COMP=C= 0.1TO 0.16,Mn=0.8TO1.1,Si=0.2,Ni=0.5,Cr1.25TO1.5,Mo=0.8 TO 1,V=0.2TO0.3,S=0.03 MAX,P=0.03 MAX.ULTIMATE TENSILE STRENGT H=95-100KG/MM2,HARDNESS=290 TO 313 BHN. SPECIFICATION ARE IND/ME/911:2015 DC NO. 5433-ME Dt 18.04.2016
STANDARD ERA BOX TO SPEC. NO. HERML/MED/PS/290 & HEM
RL DRG. NO. 1457/1 & THE PART OF DRAWING AS GIVEN BELOW :-
STANDARD BOX CONTAINER WITH CLAMP & COLLAR TO DRG NO. 1457/2
STANDARD BOX CONTAINER TO DRG . NO. 1457/3, COLLAR TO DRG. NO 1457/4, CLAMP TO DRG NO. 1457/5 , LID (STANDARD) TO DRG NO. 1457/6
Drawing no.
RL DRG. NO. 1457/1 & THE PART OF DRAWING AS GIVEN BELOW :- STANDARD BOX CONTAINER WITH CLAMP & COLLAR TO DRG NO. 1457/2 STANDARD BOX CONTAINER TO DRG . NO. 1457/3, COLLAR TO DRG. NO 1457/4, CLAMP TO DRG NO. 1457/5 , LID (STANDARD) TO DRG NO. 1457/6
RL DRG. NO. 1457/1 & THE PART OF DRAWING AS GIVEN BELOW :-
STANDARD BOX CONTAINER WITH CLAMP & COLLAR TO DRG NO. 1457/2
STANDARD BOX CONTAINER TO DRG . NO. 1457/3, COLLAR TO DRG. NO 1457/4, CLAMP TO DRG NO. 1457/5 , LID (STANDARD) TO DRG NO. 1457/6
TOP ERA BOX TO SPEC. NO. HEMRL/MED/PS/292 & HEMRL DRG. NO. 1459/1 & THE PART OF DRAWING AS GIVEN BELOW:-
TOP BOX CONTAINER WITH CLAMP & COLLAR TO DRG. NO. 1459/2, TOP BOX CONTAINER TO DRG. NO. 1459/3, COLLAR TO DRG. NO. 1459/4. LID (TOP) TO DRG. NO. 5
Drawing no.
DRG. NO. 1459/1 & THE PART OF DRAWING AS GIVEN BELOW:- TOP BOX CONTAINER WITH CLAMP & COLLAR TO DRG. NO. 1459/2, TOP BOX CONTAINER TO DRG. NO. 1459/3, COLLAR TO DRG. NO. 1459/4. LID (TOP) TO DRG. NO. 5
TOP ERA BOX TO SPEC. NO. HEMRL/MED/PS/292 & HEMRL DRG. NO. 1459/1 & THE PART OF DRAWING AS GIVEN BELOW:-
TOP BOX CONTAINER WITH CLAMP & COLLAR TO DRG. NO. 1459/2, TOP BOX CONTAINER TO DRG. NO. 1459/3, COLLAR TO DRG. NO. 1459/4. LID (TOP) TO DRG. NO. 5
Drawing : Wire drawing machine of suitable size to draw electrode steel wire to final size of dia 1.2 mm
Heat Treatment : Continuous Annealing furnace for annealing of electrode wire. Furnace should have capacity of maintainng temp 700 dec C min.
Plating : Suitable Electroplating facility to continuously plate electrode wire 1.2 mm dia with Copper.
Coiling : Suitable coiling maching for making each spool of weight 15 Kgs.
Testing : Material testing facilities like Spectrometer, UTS Machine, Coating thickness measuring guage. Inspection to be done as per GOST 2246-70 to grade CB-08Г2C
Testing : Material testing facilities like Spectrometer, UTS Machine, Coating thickness measuring guage. Inspection to be done as per GOST 2246-70 to grade CB-08Г2C
Testing : Material testing facilities like Spectrometer, UTS Machine, Coating thickness measuring guage. Inspection to be done as per GOST 2246-70 to grade CB-08Г2C
Testing : Material testing facilities like Spectrometer, UTS Machine, Coating thickness measuring guage. Inspection to be done as per GOST 2246-70 to grade CB-08Г2C
Testing : Material testing facilities like Spectrometer, UTS Machine, Coating thickness measuring guage. Inspection to be done as per GOST 2246-70 to grade CB-08Г2C
Testing : Material testing facilities like Spectrometer, UTS Machine, Coating thickness measuring guage. Inspection to be done as per GOST 2246-70 to grade CB-08Г2C
MAGNESIUM ALLOY CASTING, CASTING DIMENSION: CYLINDRICAL SHAPE-DIA 120 MM (TOLERANCE +1MM) X 1 FT LENGTH OR ITS MULTIPLES TO SPECN. MAG 3, MG-AL 10 ZN MN TO BS:2970-1972 OR BS EN-1753, EN-MCMG AL 9 ZN/(A) (NUMBER EN-MC-21120)
Specification
MAGNESIUM ALLOY CASTING, CASTING DIMENSION: CYLINDRICAL SHAPE-DIA 120 MM (TOLERANCE +1MM) X 1 FT LENGTH OR ITS MULTIPLES TO SPECN. MAG 3, MG-AL 10 ZN MN TO BS:2970-1972 OR BS EN-1753, EN-MCMG AL 9 ZN/(A) (NUMBER EN-MC-21120)
TORCH CELL(DRY CELL) 1.5 VOLTS NO.950 MAKE:EVEREADY/NIPPO/NOVINO NOTE:- THE MANUFACTURING DATE SHOULD NOT BE MORE THAN 3 MONTHS AT THE TIME OF SUPPLY AND SUPPLY MUST BE IN STAGGERED WAY
Specification
TORCH CELL(DRY CELL) 1.5 VOLTS NO.950 MAKE:EVEREADY/NIPPO/NOVINO NOTE:- THE MANUFACTURING DATE SHOULD NOT BE MORE THAN 3 MONTHS AT THE TIME OF SUPPLY AND SUPPLY MUST BE IN STAGGERED WAY
CHARGING CABLE 12V DC CONSISTING OF WIRE 3.5 SQ.MM, 1 METER LENGTH(RED & BLACK),2 NOS.OF CROCODILE CLIPS (RED & BLACK INDICATION) & 12V DC JACK. (SAMPLE MUST BE APPROVED BEFORE BULK SUPPLY)
Specification
CHARGING CABLE 12V DC CONSISTING OF WIRE 3.5 SQ.MM, 1 METER LENGTH(RED & BLACK),2 NOS.OF CROCODILE CLIPS (RED & BLACK INDICATION) & 12V DC JACK. (SAMPLE MUST BE APPROVED BEFORE BULK SUPPLY)
RECHARGEABLE BATTERY, RCR123/RCR123A/16340, 3.7 VOLT CAPACITY 650 MAH MINIMUM. A SAMPLE OF RECHARGEABLE BATTERY MUST BE SUBMITTED AT THE TIME OF TENDER
Specification
RECHARGEABLE BATTERY, RCR123/RCR123A/16340, 3.7 VOLT CAPACITY 650 MAH MINIMUM. A SAMPLE OF RECHARGEABLE BATTERY MUST BE SUBMITTED AT THE TIME OF TENDER
PCB FOR PNV MONOCULAR(TWO STAGE REGULATED POWER SUPPLY WITH LOW BATTERY VOLTAGE INDICATION OUTPUT POINTS), DETAILS AS PER DRAWING NO.: MCT-3497 NOTE: SAMPLE MUST BE PROVIDED BEFORE BULK SUPPLY.
Specification
PCB FOR PNV MONOCULAR(TWO STAGE REGULATED POWER SUPPLY WITH LOW BATTERY VOLTAGE INDICATION OUTPUT POINTS), DETAILS AS PER DRAWING NO.: MCT-3497 NOTE: SAMPLE MUST BE PROVIDED BEFORE BULK SUPPLY.
ROTARY SWITCH,6 POSITIONS,2 POLE,30 DEGREE, 200MA,115V,56 SERIES, WITH SUITABLE KNOB FOR ROTATING THE SHAFT. (LOCKING ARRANGEMENT FOR RESTRICTING THE POSITIONS OF THE SWITCH IS ALSO TO BE SUPPLIED ALONG WITH). SEALED TYPE (SHOULD WITHSTAND WATER PRESSURE OF 15PSI MINIMUM (103KPA) WITHOUT LEAKAGE.
Specification
ROTARY SWITCH,6 POSITIONS,2 POLE,30 DEGREE, 200MA,115V,56 SERIES, WITH SUITABLE KNOB FOR ROTATING THE SHAFT. (LOCKING ARRANGEMENT FOR RESTRICTING THE POSITIONS OF THE SWITCH IS ALSO TO BE SUPPLIED ALONG WITH). SEALED TYPE (SHOULD WITHSTAND WATER PRESSURE OF 15PSI MINIMUM (103KPA) WITHOUT LEAKAGE.
LED RED COLOUR WITH ADAPTER,DIA.3 MM X LENGTH 4.5 MM,INTENSITY MATCHED STANDARD DIFFUSED,IR.MAX-30 MA,IR.TYPICAL-10 MA, VR.MAX-5V,PD.MAX-120 MW,VIEWING ANGLE- 55 DEGREE,OPERATING TEMP-55 TO 100 DEG.C NOTE-SAMPLE APPROVAL REQD.BEFORE BULK SUPPLY. MM
Specification
LED RED COLOUR WITH ADAPTER,DIA.3 MM X LENGTH 4.5 MM,INTENSITY MATCHED STANDARD DIFFUSED,IR.MAX-30 MA,IR.TYPICAL-10 MA, VR.MAX-5V,PD.MAX-120 MW,VIEWING ANGLE- 55 DEGREE,OPERATING TEMP-55 TO 100 DEG.C NOTE-SAMPLE APPROVAL REQD.BEFORE BULK SUPPLY. MM
INFRARED LENS ASSEMBLY,FOCAL LENGTH GREATER THAN OR EQUAL TO 50 MM,F LESS THAN OR EQUAL TO 1.25,COMPATIBLE WITH 12 MICRON PITCH DETECTOR,MANUAL FOCUS,WEIGHT LESS THAN OR EQUALTO 380 GMS,TRANSMISSION GREATER THAN OR EQUAL TO 80%,HFOV GREATER THAN OR EQUAL TO 6 DEGREE,DETECTION:700M OF SINGLE HUMAN WALKING,RECOGNITION:500M OF SINGLE HUMAN STANDING, OPERAT TEMP:-20 TO +50 DEG.C,STORAGE TEMP:-20 TO +70 DEG.C,
Specification
INFRARED LENS ASSEMBLY,FOCAL LENGTH GREATER THAN OR EQUAL TO 50 MM,F LESS THAN OR EQUAL TO 1.25,COMPATIBLE WITH 12 MICRON PITCH DETECTOR,MANUAL FOCUS,WEIGHT LESS THAN OR EQUALTO 380 GMS,TRANSMISSION GREATER THAN OR EQUAL TO 80%,HFOV GREATER THAN OR EQUAL TO 6 DEGREE,DETECTION:700M OF SINGLE HUMAN WALKING,RECOGNITION:500M OF SINGLE HUMAN STANDING, OPERAT TEMP:-20 TO +50 DEG.C,STORAGE TEMP:-20 TO +70 DEG.C,
DC ADOPTER FOR BATTERY CHARGER 18650:- DC CONVERTER WITH INPUT CONNECTOR-CROCODILE CLIPS FOR DIRECT ATTACHMENT TO BATTERY,INPUT VOLTAGE-12-36 VOLT DC,INPUT WIRE LENGTH-1 METER, OUTPUT CONNECTOR- MICRO USB, OUTPUT ELECTRICAL SPECS-5 VOLT DC 1 AMPERE, OUTPUT WIRE LENGTH-1 METER,PROTECTIONS-APPROPRIATE OVER CURRENT AND OVER VOLTAGE PROTECTIONS BUILT IN
Specification
DC ADOPTER FOR BATTERY CHARGER 18650:- DC CONVERTER WITH INPUT CONNECTOR-CROCODILE CLIPS FOR DIRECT ATTACHMENT TO BATTERY,INPUT VOLTAGE-12-36 VOLT DC,INPUT WIRE LENGTH-1 METER, OUTPUT CONNECTOR- MICRO USB, OUTPUT ELECTRICAL SPECS-5 VOLT DC 1 AMPERE, OUTPUT WIRE LENGTH-1 METER,PROTECTIONS-APPROPRIATE OVER CURRENT AND OVER VOLTAGE PROTECTIONS BUILT IN
OPTICAL GLASS DBC-610573 IN CYLINDRICAL SHAPE DIA=45MM +1MM-0.5MM, BLANK
THICKNESS=14MM +0.5MM-0MM,
IS:1400-1960, STRIAE GRADE-A INCLUSION GRADE SMALL-B, FINE ANNEALED SO
THAT STRESS BIREFRINGENCE IS NOT MORE THAN 10NM/CM
Specification
OPTICAL GLASS DBC-610573 IN CYLINDRICAL SHAPE DIA=45MM +1MM-0.5MM, BLANK
THICKNESS=14MM +0.5MM-0MM,
IS:1400-1960, STRIAE GRADE-A INCLUSION GRADE SMALL-B, FINE ANNEALED SO
THAT STRESS BIREFRINGENCE IS NOT MORE THAN 10NM/CM
LITHIUM-ION RECHARGEABLE BATTERY 18650, 3.70 V, 12.6WH, 3400MAH,(BATTERY MUST GIVE A BACK-UP OF 06 HOURS WITH UNCOOLED THERMAL IMAGERS), TENDER SAMPLE MUST BE SUBMITTED AT THE TIME OF TENDER.
Specification
LITHIUM-ION RECHARGEABLE BATTERY 18650, 3.70 V, 12.6WH, 3400MAH,(BATTERY MUST GIVE A BACK-UP OF 06 HOURS WITH UNCOOLED THERMAL IMAGERS), TENDER SAMPLE MUST BE SUBMITTED AT THE TIME OF TENDER.
OPTICAL GLASS BAK4-569561, IN CYLINDRICAL SHAPE DIA=28MM +1MM-0.5MM, BLANK THICKNESS=7MM +0.5MM-0MM, IS:1400-1960,STRIAE GRADE-A INCLUSION GRADE SMALL-B, FINE ANNEALED SO THAT STRESS BIREFRINGENCE IS NOT MORE THAN 10 NM/CM.
Specification
OPTICAL GLASS BAK4-569561, IN CYLINDRICAL SHAPE DIA=28MM +1MM-0.5MM, BLANK THICKNESS=7MM +0.5MM-0MM, IS:1400-1960,STRIAE GRADE-A INCLUSION GRADE SMALL-B, FINE ANNEALED SO THAT STRESS BIREFRINGENCE IS NOT MORE THAN 10 NM/CM.
