BLACK PTFE COATING MATERIAL MAT FINISH WEAPON GRADE TO WITHSTAND TEMPERATURE MINIMUM UPTO 400 DEGREE CENTIGRADE

BLACK PTFE COATING MATERIAL MAT FINISH WEAPON GRADE TO WITHSTAND TEMPERATURE MINIMUM UPTO 400 DEGREE CENTIGRADE

NIL

• PAINT CATEGORY

• AT OFT BY GM OFT

CANVAS COTTON 407 GM LOD 105 CM

IND/ADE/0087 (a) Except That 1-Weight, gsm – A tolerance of +-10% shall be applicable to 407 gsm after waterproofing. 2-Count of yarn :-Warp :-2 ply of 20s Single yarn Weft :-3 ply of 24s Single yarn (Note: The count of single yarn is approximate and given for the guidance of the manufacturers. The no. of plies, however, shall not be changed.) 3-No. of threads/ inch:- Warp:-92 Weft:-48 (The tolerance in no. of threads/inch shall be +- 5%) 4-Shade OD (Olive Drab), Shade No. 298 as per IS:5

• As per Drawing/Specification

• As per Drawing/Specification

SPIRIT DENATURED SPECIAL PREPARED USING RECTIFIED SPIRIT TO IS 323-2009 REVISED (Reaffirmed - 2019) WITH ACIDITY NOT EXCEEDING 0.005% AND ALDEHYDE CONTENT 0.0 06 G/100 ML MAX. DENATURED WITH 1% DIETHYL ETHER TO IS 336 : 1973 (REAFFIRMED 2018) Revision 2 .

SPIRIT DENATURED SPECIAL PREPARED USING RECTIFIED SPIRIT TO IS 323-2009 REVISED (Reaffirmed - 2019) WITH ACIDITY NOT EXCEEDING 0.005% AND ALDEHYDE CONTENT 0.0 06 G/100 ML MAX. DENATURED WITH 1% DIETHYL ETHER TO IS 336 : 1973 (REAFFIRMED 2018) Revision 2 .

• MSME

• SPIRIT DENATURED SPECIAL PREPARED USING RECTIFIED SPIRIT TO IS 323-2009 REVISED (Reaffirmed - 2019) WITH ACIDITY NOT EXCEEDING 0.005% AND ALDEHYDE CONTENT 0.0 06 G/100 ML MAX. DENATURED WITH 1% DIETHYL ETHER TO IS 336 : 1973 (REAFFIRMED 2018) Revision 2 .

POTASSIUM NITRATE GRADE I FOR EXPLOSIVE AND PYROTECHNIC COMPOSITION TO SPECN IS:301-1982 (SECOND REVISION) REAFFIRMED 2016 AMDS 1 DC NO 3810 ME DTD 5-5-04 SIZE ALL PASSING THROUGH 125 MICROMETER I S SIEVE.

POTASSIUM NITRATE GRADE I FOR EXPLOSIVE AND PYROTECHNIC COMPOSITION TO SPECN IS:301-1982 (SECOND REVISION) REAFFIRMED 2016 AMDS 1 DC NO 3810 ME DTD 5-5-04 SIZE ALL PASSING THROUGH 125 MICROMETER I S SIEVE.

• YES

• YES

POTASSIUM SULPHATE GRADE 2 TO SPECIFICATION. JSS 6810-110: 2021 (REVISION NO. 5).

POTASSIUM SULPHATE GRADE 2 TO SPECIFICATION. JSS 6810-110 :2021 (REVISION NO. 5).

• MSME

• POTASSIUM SULPHATE GRADE 2 TO SPECIFICATION. JSS 6810-110 :2021 (REVISION NO. 5).

Oligo Ether Acrylate First Grade Conforming to Specification TY 6-01-450-76

Oligo Ether Acrylate First Grade Conforming to Specification TY 6-01-450-76

• MSME

• Oligo Ether Acrylate First Grade Conforming to Specification TY 6-01-450-76

REVOLVER 0.32" CLIP COVER AS PER DRG NO. SK- 6122 R

REVOLVER 0.32" CLIP COVER AS PER DRG NO. SK- 6122 R

• as per attached document

• As per attached document

SULPHATED INSULATING CELLULOSE GRADE E-2 AS PER GOST 5186-88

AS PER GOST 5186-88

• MSME

• AS PER GOST 5186-88

FORMULA-C6H10N8O4, MOLECULAR WT. IN TERMS OF ATOMIC WT. IN 1971 IS 258.198, DETAILS PHYSICAL AND CHEMICAL PARAMETER’S ATTACHED AS PER RUSSIAN SPECIFICATION TU 30 E 2015

FORMULA-C6H10N8O4, MOLECULAR WT. IN TERMS OF ATOMIC WT. IN 1971 IS 258.198, DETAILS PHYSICAL AND CHEMICAL PARAMETER’S ATTACHED AS PER RUSSIAN SPECIFICATION TU 30 E 2015

• MSME

• FORMULA-C6H10N8O4, MOLECULAR WT. IN TERMS OF ATOMIC WT. IN 1971 IS 258.198, DETAILS PHYSICAL AND CHEMICAL PARAMETER’S ATTACHED AS PER RUSSIAN SPECIFICATION TU 30 E 2015

POLYMETHYL SILOXANE FLUID AS PER SPECIFICATION NO. GOST NO.13032-77

POLYMETHYL SILOXANE FLUID AS PER SPECIFICATION NO. GOST NO.13032-77

• MSME

• POLYMETHYL SILOXANE FLUID AS PER SPECIFICATION NO. GOST NO.13032-77

STRONG NITRIC ACID CONFORMING TO IS:264:2005(Reaffirmed Year : 2017 ) EXPLOSIVE GR.WITH SPECIFIC REQURIMENET TO FOLLOWING CLAUSES OF TABLE-I CLAUSE 4.2 TOTAL ACIDITY (AS HNO3)% BY MASS MINIMUM 98.5% NITRIOUS ACID MAX 0.08% BY MASS(AS HNO2) SULPHATE NOT MORE THAN 0.2%.

STRONG NITRIC ACID CONFORMING TO IS:264:2005(Reaffirmed Year : 2017 ) EXPLOSIVE GR.WITH SPECIFIC REQURIMENET TO FOLLOWING CLAUSES OF TABLE-I CLAUSE 4.2 TOTAL ACIDITY (AS HNO3)% BY MASS MINIMUM 98.5% NITRIOUS ACID MAX 0.08% BY MASS(AS HNO2) SULPHATE NOT MORE THAN 0.2%.

• MSME

• STRONG NITRIC ACID CONFORMING TO IS:264:2005(Reaffirmed Year : 2017 ) EXPLOSIVE GR.WITH SPECIFIC REQURIMENET TO FOLLOWING CLAUSES OF TABLE-I CLAUSE 4.2 TOTAL ACIDITY (AS HNO3)% BY MASS MINIMUM 98.5% NITRIOUS ACID MAX 0.08% BY MASS(AS HNO2) SULPHATE NOT MORE THAN 0.2%.

TUBE COVER SRCR,DW-1109-1010-13

TUBE COVER SRCR,DW-1109-1010-13

DW-1109-1010-13

• Manufacturing Facilities Involved • CNC /Conventional machining or Metal Forming –Press Work. • Blanking/laser Cut if metal forming –Press Work. In case the tenderer is outsourcing any/some of the above activities, copy of agreement with such source shall be submitted. The machining Facility is mandatory.

• Inspection Facilities Involved • Standard Measuring Instruments & Gauges • Material Testing Facility with NABL Accreditation Tenderer shall satisfy / declare the required inspection facilities are available either in-house or outsourced.

ROAD WHEEL ASSY TO DRG. NO. 172.50.001CB-BCB

ROAD WHEEL ASSY TO DRG. NO. 172.50.001CB-BCB

172.50.001CB-BCB

• ATTACHED

• ATTACHED

ETHER SOLVENT GRADE(STABILISER FREE)TO SPECIFICATION NO. IS-336-1973(SECOND REVISION) REAFFIRMED -2018

ETHER SOLVENT GRADE(STABILISER FREE)TO SPECIFICATION NO. IS-336-1973(SECOND REVISION) REAFFIRMED -2018

• MSME

• ETHER SOLVENT GRADE(STABILISER FREE)TO SPECIFICATION NO. IS-336-1973(SECOND REVISION) REAFFIRMED -2018

Trade Assistance for Stuffed Wrapped And Strung in TAM

Specn No.-IND/GS/1587

• As per specification.

• As per specification.

STEEL BILLET FOR 155MM M-107 FORGING AS PER OFAJ DRG.NO.F-652

STEEL BILLET FOR 155MM M 107 FORGING AS PER DRG NO F 652

OFAJ DRG.NO.F-652

• 1. Blast Furnace with LD Converter (Basic Oxygen Furnace) OR Electric ARC Furnace OR Induction Furnace. 2. Firm should be able to supply minimum 500 to 650 nos. of parted steel billets per heat batch. 3. Ladle Refining furnace along with Argon purging system. 4. Vacuum degassing furnace along with Argon purging system. 5. Continuous caster OR Bottom pouring ingot casting facilities. 6. Soaking Pits OR Pre heating Furnace. 7. Rolling Mill to maintain reduction ratio of at least 6:1. 8. Annealing OR Normalising Furnace

• 9. Optical emission Spectrometer. 10. Carbon Sulphur Analyzer. 11. Temperature measuring facilities during melting/ casting. 12. Mechanical test facilities, as applicable. 13. Metallography facilities for Micro and Macro Analysis. 14. Ultrasonic Testing facilities with qualified personnel. B) Desirable Eligibility Criteria: Firm should have successfully executed supply orders for similar calibre ammunition in past. Supply order copies to be attached/ uploaded along with TE

PenDrive

Demo

1478

• mattech 1234

• test me

PACKAGING WOODEN BOX FOR .32 REVOLVER PRAHAAR DRG. NO. SK-6139R.

PACKAGING WOODEN BOX FOR .32 REVOLVER PRAHAAR DRG. NO. SK-6139R.

SK-6139R.

• Wooden Fabrication

• 1) Chemical & Mechanical properties as per std. given drawing /Specification. 2) Dimensional inspection for all dimension given in the drawing & other parameter which are mentioned in relevant drawing/specification.

ELECTRICAL TRIGGER ASSEMBLE SOLENOID TRIGGER ASSEMBLY TO DRG NO cd12/6n7 65P 11300

ELECTRICAL TRIGGER ASSEMBLE SOLENOID TRIGGER ASSEMBLY TO DRG NO cd12/6n7 65P 11300

65P 11300

• As per Drawing

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE & SQAE

CYLINDER 443 MK1/L GALVANISED STEEL SHEET TYPE DEEP DRAWING DESIGNATION GPD TO SPECN. IS : 277-2018 AS PER DRG.NO. OFBA/CX/51 DT.24/2/89. LAST AMENDMENT DATE : 16.07.2020. FELT DISC.

CYLINDER 443 MK1/L GALVANISED STEEL SHEET TYPE DEEP DRAWING DESIGNATION GPD TO SPECN. IS : 277-2018 AS PER DRG.NO. OFBA/CX/51 DT.24/2/89. LAST AMENDMENT DATE : 16.07.2020. FELT DISC.

AS PER DRG.NO. OFBA/CX/51 DT.24/2/89. LAST AMENDMENT DATE : 16.07.2020. FELT DISC.

• MSME

• CYLINDER 443 MK1/L GALVANISED STEEL SHEET TYPE DEEP DRAWING DESIGNATION GPD TO SPECN. IS : 277-2018 AS PER DRG.NO. OFBA/CX/51 DT.24/2/89. LAST AMENDMENT DATE : 16.07.2020. FELT DISC.

ET FUZE TURBO ASSEMBLY FOR DPICM WARHEAD TO DRG.NO. 1202 01 00 00 00 000 11DA AS PER QAP NO.ARDE/AE/ET FUZE/TURBO/MECHSECT/QAP-1 (PROVISIONAL)

ET FUZE TURBO ASSEMBLY FOR DPICM WARHEAD TO DRG.NO. 1202 01 00 00 00 000 11DA AS PER QAP NO.ARDE/AE/ET FUZE/TURBO/MECHSECT/QAP-1 (PROVISIONAL)

ET FUZE TURBO ASSEMBLY FOR DPICM WARHEAD TO DRG.NO. 1202 01 00 00 00 000 11DA AS PER QAP NO.ARDE/AE/ET FUZE/TURBO/MECHSECT/QAP-1 (PROVISIONAL)

• as per attachment

• as per attachment

ET FUZE TURBO ASSEMBLY FOR DPICM WARHEAD TO DRG.NO. 1202 01 00 00 00 000 11DA AS PER QAP NO.ARDE/AE/ET FUZE/TURBO/MECHSECT/QAP-1 (PROVISIONAL)

ET FUZE TURBO ASSEMBLY FOR DPICM WARHEAD TO DRG.NO. 1202 01 00 00 00 000 11DA AS PER QAP NO.ARDE/AE/ET FUZE/TURBO/MECHSECT/QAP-1 (PROVISIONAL)

ET FUZE TURBO ASSEMBLY FOR DPICM WARHEAD TO DRG.NO. 1202 01 00 00 00 000 11DA AS PER QAP NO.ARDE/AE/ET FUZE/TURBO/MECHSECT/QAP-1 (PROVISIONAL)

• as per attachment

• as per attachment

BODY ASSY TO DRG NO.4-26941-060Cb DC34269-A DT.17-11-87.

BODY ASSY TO DRG NO.4-26941-060Cb DC34269-A DT.17-11-87.

BODY ASSY TO DRG NO.4-26941-060Cb DC34269-A DT.17-11-87.

• TO BE UPLOADED BY QPC

• TO BE UPLOADED BY QPC

SELF-ADHESIVE POLYTHENE BAG SIZE 65X50CMX0.04MM THICK SPECIFICATION NO. CQA(GS)/US/434(A) EXCEPT SEALING SHALL BEOF ADHESIVE TYPE.AS PER RELEVANT CLAUSE OF SPECIFICATION.AS PER RELEVANT CLAUSE OF SPECIFICATION

SELF-ADHESIVE POLYTHENE BAG SIZE 65X50CMX0.04MM THICK SPECIFICATION NO. CQA(GS)/US/434(A) EXCEPT SEALING SHALL BEOF ADHESIVE TYPE.AS PER RELEVANT CLAUSE OF SPECIFICATION.AS PER RELEVANT CLAUSE OF SPECIFICATION

• ESSENTIAL ;- 1.Polythene Film Extrusion Machine 2.Rolling Machine 3. Machine/Apparatus for application of adhesive on the polythene bag to make the store self adhesive 4. Cutting Machine

• ESSENTIAL ;- 1.Measuring Scale 2. Thickness Tester

SELF ADHESIVE POLYTHENE BAG.SIZE:50CM X 35 CM.THICKNESS OF POLYTHENE FILM-0.04 MM SPECIFICATION;-CQA(GS)/US/434 (a),EXCEPT THAT THE SEALING WILL BE "SELF ADHESIVE"AS PER RELEVANT CLAUSE OF THE SPECIFICATIONAS PER RELEVANT CLAUSE OF THE SPECIFICATION

SELF ADHESIVE POLYTHENE BAG.SIZE:50CM X 35 CM.THICKNESS OF POLYTHENE FILM-0.04 MM SPECIFICATION;-CQA(GS)/US/434 (a),EXCEPT THAT THE SEALING WILL BE "SELF ADHESIVE"AS PER RELEVANT CLAUSE OF THE SPECIFICATIONAS PER RELEVANT CLAUSE OF THE SPECIFICATION

• ESSENTIAL ;- 1.Polythene Film Extrusion Machine 2.Rolling Machine 3. Machine/Apparatus for application of adhesive on the polythene bag to make the store self adhesive 4. Cutting Machine

• ESSENTIAL ;- 1.Measuring Scale 2. Thickness Tester

JUTE TWINE 3 PLY SPECIFICATION NO.- JUTE TWINE 3 PLY IS:9112-1984 (AMENDMENT NO. 1) (V.NO.2) (REAFFIRMED - 2001) SECOND REVISION

JUTE TWINE 3 PLY SPECIFICATION NO.- JUTE TWINE 3 PLY IS:9112-1984 (AMENDMENT NO. 1) (V.NO.2) (REAFFIRMED - 2001) SECOND REVISION

• as per attached list (Manufacturing Technology Files )

• as per attached list (Testing / Inspection Facility Files )

TAPE NYLON THICK OG OF SIZES FOR BAG BAG KIT UNIVERSAL TAPE NYLON THICK OG OF SIZES FOR BAG BAG KIT UNIVERSAL (MARK-2) ONE SET CONSISTS OF TAPE NYLON THICK OG 25MM, 38MM & 65MM (A) TAPE NYLON THICK OG 25MM = 0.97 MTR (B) TAPE NYLON THICK OG 38MM = 5.10 MTR (C) TAPE NYLON THICK OG 65MM = 0.32 MTR SPECN:- DMSRDE/T&GS/92/403

TAPE NYLON THICK OG OF SIZES FOR BAG BAG KIT UNIVERSAL TAPE NYLON THICK OG OF SIZES FOR BAG BAG KIT UNIVERSAL (MARK-2) ONE SET CONSISTS OF TAPE NYLON THICK OG 25MM, 38MM & 65MM (A) TAPE NYLON THICK OG 25MM = 0.97 MTR (B) TAPE NYLON THICK OG 38MM = 5.10 MTR (C) TAPE NYLON THICK OG 65MM = 0.32 MTR SPECN:- DMSRDE/T&GS/92/403

• as per attached list (Manufacturing Technology Files )

• as per attached list (Testing / Inspection Facility Files )

PLASTIC SLIDE FASTENERS MEDIUM HEAVY DUTY OG WITH TWO AUTO LOCK SLIDER FACING THE TWO OPEN ENDS 84 CM SPECN NO. - IS: 14181(Part 1 to 3 ): AMENDMENT. No.2, March 2008

PLASTIC SLIDE FASTENERS MEDIUM HEAVY DUTY OG WITH TWO AUTO LOCK SLIDER FACING THE TWO OPEN ENDS 84 CM SPECN NO. - IS: 14181(Part 1 to 3 ): AMENDMENT. No.2, March 2008

• as per attached list (Manufacturing Technology Files )

• as per attached list (Testing / Inspection Facility Files )

ETHANOL AR GRADE ( ABSOLUTE ALCOHOL), ETHANOL CONTENT SHOULD BE Mix. 0.79 SHOULD BE MISCIBLE WITH WATER ( REFER IS-321 FOR TEST METHODS) CONFIRMING TO SPECIFICATION No.- B.F.-1.49, Dated : 11/12/2020.

ETHANOL AR GRADE ( ABSOLUTE ALCOHOL), ETHANOL CONTENT SHOULD BE Mix. 0.79 SHOULD BE MISCIBLE WITH WATER ( REFER IS-321 FOR TEST METHODS) CONFIRMING TO SPECIFICATION No.- B.F.-1.49, Dated : 11/12/2020.

• MSME

• ETHANOL AR GRADE ( ABSOLUTE ALCOHOL), ETHANOL CONTENT SHOULD BE Mix. 0.79 SHOULD BE MISCIBLE WITH WATER ( REFER IS-321 FOR TEST METHODS) CONFIRMING TO SPECIFICATION No.- B.F.-1.49, Dated : 11/12/2020.

OIL INDUSTRIAL I-8A BRAND, ACIDITY INDEX: MILLIGRAMS KOH PER 1 GRAM OF OIL IS MAX 0.02, OPEN-CUP FLASH TEMPERATURE NOT BELOW:+150 DEGC, MASS FRACTION OF ASH MAX:0.005%, CONTENT OF MECHANICAL AS PER

OIL INDUSTRIAL I-8A BRAND, ACIDITY INDEX: MILLIGRAMS KOH PER 1 GRAM OF OIL IS MAX 0.02, OPEN-CUP FLASH TEMPERATURE NOT BELOW:+150 DEGC, MASS FRACTION OF ASH MAX:0.005%, CONTENT OF MECHANICAL AS PER

• MSME

• OIL INDUSTRIAL I-8A BRAND, ACIDITY INDEX: MILLIGRAMS KOH PER 1 GRAM OF OIL IS MAX 0.02, OPEN-CUP FLASH TEMPERATURE NOT BELOW:+150 DEGC, MASS FRACTION OF ASH MAX:0.005%, CONTENT OF MECHANICAL AS PER

PROPYLENE CARBONATE(C4H603) ( 4-METHYL – I, 3-DIOXOLAN – 2-ONE) CONTENT ( PURITY)SHOULD BE MORE THAN 99%, SPECIFIC GRAVITY SHOULD BE MIN 1.205, SHOULD BE MISCIBLE WITH WATER CONFIRMING TO SPECIFICATION No.- B.F.-1.49, Dated : 11/12/2020.

PROPYLENE CARBONATE(C4H603) ( 4-METHYL – I, 3-DIOXOLAN – 2-ONE) CONTENT ( PURITY)SHOULD BE MORE THAN 99%, SPECIFIC GRAVITY SHOULD BE MIN 1.205, SHOULD BE MISCIBLE WITH WATER CONFIRMING TO SPECIFICATION No.- B.F.-1.49, Dated : 11/12/2020.

• MSME

• PROPYLENE CARBONATE(C4H603) ( 4-METHYL – I, 3-DIOXOLAN – 2-ONE) CONTENT ( PURITY)SHOULD BE MORE THAN 99%, SPECIFIC GRAVITY SHOULD BE MIN 1.205, SHOULD BE MISCIBLE WITH WATER CONFIRMING TO SPECIFICATION No.- B.F.-1.49, Dated : 11/12/2020.

MASS FRACTION AT LEAST 98% RESIDUE AFTER WET SIEVING ON THE SCREEN MAX. 04.%, MASS FRACTION OF VOLATILE SUBSTANCE MAX. 0.3% AS PER RUSSIAN SPECIFICATION TU 301-10-012-89.

MASS FRACTION AT LEAST 98% RESIDUE AFTER WET SIEVING ON THE SCREEN MAX. 04.%, MASS FRACTION OF VOLATILE SUBSTANCE MAX. 0.3% AS PER RUSSIAN SPECIFICATION TU 301-10-012-89.

• MSME

• MASS FRACTION AT LEAST 98% RESIDUE AFTER WET SIEVING ON THE SCREEN MAX. 04.%, MASS FRACTION OF VOLATILE SUBSTANCE MAX. 0.3% AS PER RUSSIAN SPECIFICATION TU 301-10-012-89.

TEFLON-4D, APPEARANCE: SMALL FRIABLE POWDER OF WHITE COLOUR. AS PER SPECIFICATION No. GOST No.14906-77.

TEFLON-4D, APPEARANCE: SMALL FRIABLE POWDER OF WHITE COLOUR. AS PER SPECIFICATION No. GOST No.14906-77.

• MSME

• TEFLON-4D, APPEARANCE: SMALL FRIABLE POWDER OF WHITE COLOUR. AS PER SPECIFICATION No. GOST No.14906-77.

A' TWILL JUTE BAGS OF SIZE 600MM LENGTH X 350MM WIDTH HAVING 2 "YELLOW BAND ACROSS THE WIDTH 10 " BELOW THE TOP FOR BAGGING OF 33 KG OF KF 35 BRASS CUPS AS PER SPECIFICATION IS:1943-1995 REAFFIRMED 2016. SEAM & SAFETY STITCHES TO BE DONE BY USING TWO STRANDS OF 3 PLY JUTE TWINE & TWO PLY JUTE TWINE RESPECTIVELY.

SPECIFICATION IS:1943-1995 REAFFIRMED 2016..

NA

• NA

• NA

AMMONIUM NITRATE AS PER SPECIFIATION NO. IS:4668-1985 AMENDMENT NO.2 (REAFFIMRMED 2016) , PURITY 98.5% MINIMUM, MATTER INSOLUBLE IN WATER – 0.2% MAXIMUM, SOLUBILITY IN CCL4=0.2% MAX, AS PER DMP METHOD.

AMMONIUM NITRATE AS PER SPECIFIATION NO. IS:4668-1985 AMENDMENT NO.2 (REAFFIMRMED 2016) , PURITY 98.5% MINIMUM, MATTER INSOLUBLE IN WATER – 0.2% MAXIMUM, SOLUBILITY IN CCL4=0.2% MAX, AS PER DMP METHOD.

• MSME

• AMMONIUM NITRATE AS PER SPECIFIATION NO. IS:4668-1985 AMENDMENT NO.2 (REAFFIMRMED 2016) , PURITY 98.5% MINIMUM, MATTER INSOLUBLE IN WATER – 0.2% MAXIMUM, SOLUBILITY IN CCL4=0.2% MAX, AS PER DMP METHOD.

BEARING TO DRG NO BOF 6112469 OR IMB 429CN

BEARING TO DRG NO BOF 6112469 OR IMB 429CN

• As per tender document annexure L

• As per tender document annexure L

PIN SHOULDER HEADED TO DRG NO 5315 001003

PIN SHOULDER HEADED TO DRG NO 5315 001003

• As per tender document Annexure L

• As per tender document Annexure L

Unit load 155 Charges M4A2 to DRG. NO. 13646-4-0 DC NO. 35707-A AS PER CFA DRG. NO. 13-/003, 13-S/003/1,13-S/003/2,13-S/003/3, 13-S/003/4, 13-S/003/5 AND 13-S/003/6

Unit load 155 Charges M4A2 to DRG. NO. 13646-4-0 DC NO. 35707-A AS PER CFA DRG. NO. 13-/003, 13-S/003/1,13-S/003/2,13-S/003/3, 13-S/003/4, 13-S/003/5 AND 13-S/003/6

DRG. NO. 13646-4-0 DC NO. 35707-A AS PER CFA DRG. NO. 13-/003, 13-S/003/1,13-S/003/2,13-S/003/3, 13-S/003/4, 13-S/003/5 AND 13-S/003/6

• MSME

• DRG. NO. 13646-4-0 DC NO. 35707-A AS PER CFA DRG. NO. 13-/003, 13-S/003/1,13-S/003/2,13-S/003/3, 13-S/003/4, 13-S/003/5 AND 13-S/003/6

PLUG LF 7441120925

PLUG LF 7441120925

56089473

• MECHANICAL COMPONENT

• MECHANICAL COMPONENT

BODY LF 7440206798

BODY LF 7440206798

MRS.40.00.001-01

• MECHANICAL COMPONENT

• MECHANICAL COMPONENT

STATOR ASSY LF 7432417002

STATOR ASSY LF 7432417002

AF6667001

• MECHANICAL COMPONENT

• MECHANICAL COMPONENT

BODY LF 7432311060

BODY LF 7432311060

Y-6212555

• MECHANICAL COMPONENT

• MECHANICAL COMPONENT

184.01.028

184.01.028

184.01.028

• Core competency is attached herewith

• Core competency is attached herewith

1ST PLATE to LF No.6201201085

184.01.027

184.01.027

• Core competency/VQC is attached herewith

• Core competency/VQC is attached herewith

CARBON BLACK MASS FRACTION OF LOSS AT 105 DEGREE CENTIGRADE: MAX. 1.5%, MASS FRACTION OF ASH : MAX. 0.48%, BULK DENSITY OF GRANULATED CARBON BLACK : AT LEAST 330 KG/CUBIC METERS AS PER ATTACHED GOST 7885-86

CARBON BLACK MASS FRACTION OF LOSS AT 105 DEGREE CENTIGRADE: MAX. 1.5%, MASS FRACTION OF ASH : MAX. 0.48%, BULK DENSITY OF GRANULATED CARBON BLACK : AT LEAST 330 KG/CUBIC METERS AS PER ATTACHED GOST 7885-86

• MSME

• CARBON BLACK MASS FRACTION OF LOSS AT 105 DEGREE CENTIGRADE: MAX. 1.5%, MASS FRACTION OF ASH : MAX. 0.48%, BULK DENSITY OF GRANULATED CARBON BLACK : AT LEAST 330 KG/CUBIC METERS AS PER ATTACHED GOST 7885-86

PLASTIC SLIDE FASTENERS MEDIUM HEAVY DUTY OG WITH TWO AUTO LOCK SLIDER FACING THE TWO OPEN ENDS 81 CM SPECIFICATION IS:14181()PART 1 TO 3 ): AMDT NO.2,MARCH 2008

SPECIFICATION IS:14181()PART 1 TO 3 ): AMDT NO.2,MARCH 2008

• as per attached list (Manufacturing Technology Files )

• as per attached list (Testing / Inspection Facility Files )

PLASTIC SLIDE FASTENER MEDIUM HEAVY DUTY OG WITH TWO AUTO LOCK SLIDER FACING THE TWO OPEN ENDS 76 CMS SPECIFICATION : IS:14181(PART 1 TO 3):AMDT NO.2, MARCH 2008

SPECIFICATION : IS:14181(PART 1 TO 3):AMDT NO.2, MARCH 2008

• as per attached list (Manufacturing Technology Files )

• as per attached list (Testing / Inspection Facility Files )

PLASTIC SLIDE FASTENERS MEDIUM HEAVY DUTY OG WITH TWO AUTO LOCK SLIDER FACING THE TWO OPEN ENDS 73 CM SPECIFICATION : IS:14181(PART 1 TO 3):AMDT.NO.2, MARCH 2008

SPECIFICATION : IS:14181(PART 1 TO 3):AMDT.NO.2, MARCH 2008

• as per attached list (Manufacturing Technology Files )

• as per attached list (Testing / Inspection Facility Files )

PLASTIC SLIDE FASTENER MEDIUM HEAVY DUTY WITH TWO AUTO LOCK SLIDER FACING WITH TWO OPEN ENDS SIZE 78 CM SPECIFICATION: IS:14181(PART 1 TO 3):AMDT NO.2, MARCH 2008

SPECIFICATION: IS:14181(PART 1 TO 3):AMDT NO.2, MARCH 2008

• as per attached list (Manufacturing Technology Files )

• as per attached list (Testing / Inspection Facility Files )

PLASTIC SLIDE FASTENERS MEDIUM HEAVY DUTY OG WITH TWO AUTO LOCK SLIDER FACING THE TWO OPEN ENDS 70 CM SPECN.NO. IS:14181(PART 1 TO 3):AMENDMENT NO.2, MARCH 2008

PLASTIC SLIDE FASTENERS MEDIUM HEAVY DUTY OG WITH TWO AUTO LOCK SLIDER FACING THE TWO OPEN ENDS 70 CM SPECN.NO. IS:14181(PART 1 TO 3):AMENDMENT NO.2, MARCH 2008

• as per attached list (Manufacturing Technology Files )

• as per attached list (Testing / Inspection Facility Files )

OCFAv/Garment/001(c) & OCFAv/Garment/002(c) Specification "FABRICATION OF JACKET & TROUSERS COMBAT PC DIS WITH INDIAN ARMY LOGO 220 GSM IN SET"

OCFAv/Garment/001(c) & OCFAv/Garment/002(c) Specification "FABRICATION OF JACKET & TROUSERS COMBAT PC DIS WITH INDIAN ARMY LOGO 220 GSM IN SET"

• as per attached list (Manufacturing Technology Files )

• as per attached list (Testing / Inspection Facility Files )

FLEXIBLE POLY URETHANE FOAM 8 MM THICK SHEET OF 190CMS X 90 CM IS:7933-1975 REAFFIRMED 2008 AS PER SPECIFICATION

FLEXIBLE POLY URETHANE FOAM 8 MM THICK SHEET OF 190CMS X 90 CM IS:7933-1975 REAFFIRMED 2008 AS PER SPECIFICATION

• as per attached list (Manufacturing Technology Files )

• as per attached list (Testing / Inspection Facility Files )

PLASTIC SLIDE FASTENERS OPEN END HEAVY DUTY OG 28 CMS SPECN. NO.IS:14181(PART 1 TO 3):2002 AMENDMENT NO.2 MARCH 2008 AS PER RELEVANT CLAUSE OF SPECIFICATION

PLASTIC SLIDE FASTENERS OPEN END HEAVY DUTY OG 28 CMS SPECN. NO.IS:14181(PART 1 TO 3):2002 AMENDMENT NO.2 MARCH 2008 AS PER RELEVANT CLAUSE OF SPECIFICATION

• as per attached list (Manufacturing Technology Files )

• as per attached list (Testing / Inspection Facility Files )

PLASTIC SLIDE FASTENERS CLOSED END MEDIUM SPECIAL DUTY AUTO LOCK OG 36 CM SPECN. NO.IS:14181(PART 1 TO 3):2002 AMENDMENT NO.2 MARCH 2008 AS PER RELEVANT CLAUSE OF SPECIFICATION

PLASTIC SLIDE FASTENERS CLOSED END MEDIUM SPECIAL DUTY AUTO LOCK OG 36 CM SPECN. NO.IS:14181(PART 1 TO 3):2002 AMENDMENT NO.2 MARCH 2008 AS PER RELEVANT CLAUSE OF SPECIFICATION

• as per attached list (Manufacturing Technology Files )

• as per attached list (Testing / Inspection Facility Files )

PLASTIC SLIDE FASTENERS OPEN END MEDIUM SPECIAL DUTY AUTO LOCK OG 66 CMS Specn No. IS:14181(PART 1 TO 3):2002 AMENDMENT NO. 2 MARCH 2008 AS PER RELEVANT CLAUSE OF SPECIFICATION

PLASTIC SLIDE FASTENERS OPEN END MEDIUM SPECIAL DUTY AUTO LOCK OG 66 CMS Specn No. IS:14181(PART 1 TO 3):2002 AMENDMENT NO. 2 MARCH 2008 AS PER RELEVANT CLAUSE OF SPECIFICATION

• as per attached list (Manufacturing Technology Files )

• as per attached list (Testing / Inspection Facility Files )

PLASTIC SLIDE FASTENERS OPEN END MEDIUM SPECIAL DUTY AUTO LOCK OG 60 CMS SPECN. NO.IS:14181(PART 1 TO 3):2002 AMENDMENT NO.2 MARCH 2008 AS PER RELEVANT CLAUSE OF SPECIFICATION

PLASTIC SLIDE FASTENERS OPEN END MEDIUM SPECIAL DUTY AUTO LOCK OG 60 CMS SPECN. NO.IS:14181(PART 1 TO 3):2002 AMENDMENT NO.2 MARCH 2008 AS PER RELEVANT CLAUSE OF SPECIFICATION

• as per attached list (Manufacturing Technology Files )

• as per attached list (Testing / Inspection Facility Files )

PLASTIC SLIDE FASTENERS OPEN END MEDIUM SPECIAL DUTY AUTO LOCK OG 60 CMS SPECN. NO.IS:14181(PART 1 TO 3):2002 AMENDMENT NO.2 MARCH 2008 AS PER RELEVANT CLAUSE OF SPECIFICATION

PLASTIC SLIDE FASTENERS OPEN END MEDIUM SPECIAL DUTY AUTO LOCK OG 60 CMS SPECN. NO.IS:14181(PART 1 TO 3):2002 AMENDMENT NO.2 MARCH 2008 AS PER RELEVANT CLAUSE OF SPECIFICATION

• as per attached list (Manufacturing Technology Files )

• as per attached list (Testing / Inspection Facility Files )

PLASTIC SLIDE FASTENERS OPEN END MEDIUM SPECIAL DUTY AUTO LOCK OG 58 CMS. SPECIFICATION IS:14181(PART 1 TO 3):2002 AMENDMENT NO. 2 MARCH 2008 AS PER RELEVANT CLAUSE OF SPECIFICATION

PLASTIC SLIDE FASTENERS OPEN END MEDIUM SPECIAL DUTY AUTO LOCK OG 58 CMS. SPECIFICATION IS:14181(PART 1 TO 3):2002 AMENDMENT NO. 2 MARCH 2008 AS PER RELEVANT CLAUSE OF SPECIFICATION

• as per attached list (Manufacturing Technology Files )

• as per attached list (Testing / Inspection Facility Files )

PLASTIC SLIDE FASTENERS OPEN END HEAVY DUTY AUTO LOCK OG 74 CMS SPECN. NO.IS:14181(PART 1 TO 3):2002 AMENDMENT NO.2 MARCH 2008 AS PER RELEVANT CLAUSE OF SPECIFICATION

PLASTIC SLIDE FASTENERS OPEN END HEAVY DUTY AUTO LOCK OG 74 CMS SPECN. NO.IS:14181(PART 1 TO 3):2002 AMENDMENT NO.2 MARCH 2008 AS PER RELEVANT CLAUSE OF SPECIFICATION

• as per attached list (Manufacturing Technology Files )

• as per attached list (Testing / Inspection Facility Files )

PLASTIC SLIDE FASTENERS OPEN END HEAVY DUTY AUTO LOCK OG 71 CMS SPECN. NO.IS:14181(PART 1 TO 3):2002 AMENDMENT NO.2 MARCH 2008 AS PER RELEVANT CLAUSE OF SPECIFICATION.

PLASTIC SLIDE FASTENERS OPEN END HEAVY DUTY AUTO LOCK OG 71 CMS SPECN. NO.IS:14181(PART 1 TO 3):2002 AMENDMENT NO.2 MARCH 2008 AS PER RELEVANT CLAUSE OF SPECIFICATION.

• as per attached list (Manufacturing Technology Files )

• as per attached list (Testing / Inspection Facility Files )

PLASTIC SLIDE FASTENERS OPEN END HEAVY DUTY AUTO LOCK OG 68 CMS. SPECN NO. IS:14181(PART 1 TO 3) : 2002 AMENDMENT NO.2 MARCH 2008 AS PER RELEVANT CLAUSE OF SPECIFICATION

PLASTIC SLIDE FASTENERS OPEN END HEAVY DUTY AUTO LOCK OG 68 CMS. SPECN NO. IS:14181(PART 1 TO 3) : 2002 AMENDMENT NO.2 MARCH 2008 AS PER RELEVANT CLAUSE OF SPECIFICATION

• as per attached list (Manufacturing Technology Files )

• as per attached list (Testing / Inspection Facility Files )

PLASTIC SLIDE FASTENERS OPEN END HEAVY DUTY AUTO LOCK OG 66 CMS. SPECN NO. IS:14181(PART 1 TO 3) : 2002 AMENDMENT NO.2 MARCH 2008 AS PER RELEVANT CLAUSE OF SPECIFICATION

PLASTIC SLIDE FASTENERS OPEN END HEAVY DUTY AUTO LOCK OG 66 CMS. SPECN NO. IS:14181(PART 1 TO 3) : 2002 AMENDMENT NO.2 MARCH 2008 AS PER RELEVANT CLAUSE OF SPECIFICATION

• as per attached list (Manufacturing Technology Files )

• as per attached list (Testing / Inspection Facility Files )

TARGET SURVEYING BEACON 2A AS PER DRAWING CII 555

TARGET SURVEYING BEACON 2A AS PER DRAWING CII 555

TARGET SURVEYING BEACON 2A AS PER DRAWING CII 555

• AS PER S. NO. 63 , ANNEXURE 1 OF OFB LETTER NO.OFB/108/ONLINE VR/QC DT. 12.02.2019
• AS PER S. NO. 63 , ANNEXURE 1 OF OFB LETTER NO.OFB/108/ONLINE VR/QC DT. 12.02.2019
• AS PER S. NO. 63 , ANNEXURE 1 OF OFB LETTER NO.OFB/108/ONLINE VR/QC DT. 12.02.2019
• AS PER S. NO. 63 , ANNEXURE 1 OF OFB LETTER NO.OFB/108/ONLINE VR/QC DT. 12.02.2019
• AS PER S. NO. 63 , ANNEXURE 1 OF OFB LETTER NO.OFB/108/ONLINE VR/QC DT. 12.02.2019

• AS PER S. NO. 63 , ANNEXURE 1 OF OFB LETTER NO.OFB/108/ONLINE VR/QC DT. 12.02.2019
• AS PER S. NO. 63 , ANNEXURE 1 OF OFB LETTER NO.OFB/108/ONLINE VR/QC DT. 12.02.2019
• AS PER S. NO. 63 , ANNEXURE 1 OF OFB LETTER NO.OFB/108/ONLINE VR/QC DT. 12.02.2019
• AS PER S. NO. 63 , ANNEXURE 1 OF OFB LETTER NO.OFB/108/ONLINE VR/QC DT. 12.02.2019
• AS PER S. NO. 63 , ANNEXURE 1 OF OFB LETTER NO.OFB/108/ONLINE VR/QC DT. 12.02.2019

MANUFACTURE AND SUPPLY OF BARREL BLANK BEFORE COLD SWAGING WITH CHAMBER TO DRG NO TEND 2226STR 2 FROM OFT MATERIAL

MANUFACTURE AND SUPPLY OF BARREL BLANK BEFORE COLD SWAGING WITH CHAMBER TO DRG NO TEND 2226STR 2 FROM OFT MATERIAL

TEND 2226 STAR 2

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

MOD. COMPOSITE ARMOUR RHS & LHS FOR UPGRADED MPV 4X4DRG. NO. – 2687-57-31

ODC-VFJ/SP/COMPOSITE ARMOUR/02 Dated 23.10.2019

2687-57-31

• As per Specs, Drawing, QAI

• As per Specs, Drawing, QAI

Upper Hand Guard Assembly for CQB 5 56 x 45 MM DRG No 1901 01 01 00 00 001 00DA

Upper Hand Guard Assembly for CQB 5 56 x 45 MM DRG No 1901 01 01 00 00 001 00DA

DRG No 1901 01 01 00 00 001 00DA

• Moulding Process

• Chemical & Mechanical Properties as per std. Given drawing
• Dimensional inspection, for all dimensions given in the drawing & other parameter which are mentioned in relevant drawing.

Fabrication of Overall Combination Disruptive Pattern with Indian Army Logo Provisional Specification No. S/2764/OC Army Logo/TC-15 As per relevant clause of specification.

Fabrication of Overall Combination Disruptive Pattern with Indian Army Logo Provisional Specification No. S/2764/OC Army Logo/TC-15 As per relevant clause of specification.

• as per attached list (Manufacturing Technology Files )

• as per attached list (Testing / Inspection Facility Files )

Tape Newar Polyester 25mm OG Provisional Schedule No.CQA(T&C)/TEFSGAR/TC-6/2005

Tape Newar Polyester 25mm OG Provisional Schedule No.CQA(T&C)/TEFSGAR/TC-6/2005

• as per attached list (Manufacturing Technology Files )

• as per attached list (Testing / Inspection Facility Files )

Sewing Thread Spun Polyester 145 D Tex/6 OG Specification:- Sewing Thread Spun Polyester 145 D Tex/6 OG - IS:9543-1980 Reaffirmed 2010 V.N. 9

Sewing Thread Spun Polyester 145 D Tex/6 OG Specification:- Sewing Thread Spun Polyester 145 D Tex/6 OG - IS:9543-1980 Reaffirmed 2010 V.N. 9

• as per attached list (Manufacturing Technology Files )

• as per attached list (Testing / Inspection Facility Files )

ITO COATING ON PROTECTIVE GLASS AS PER DRAWING NO. Y7168653 OF IP3-3 MATERIAL WILL BE SUPPLIED BY OLF

ITO COATING ON PROTECTIVE GLASS AS PER DRAWING NO. Y7168653 OF IP3-3 MATERIAL WILL BE SUPPLIED BY OLF

Y7168653

• FIRM NEEDS TO SUBMIT DETAILS OF MANUFCTURING FACILITIES FOR SUBJEC ITEM

• FIRM NEEDS TO SUBMIT DETAILS OF TESTING FACILITIES FOR SUBJEC ITEM

SEALANT 51 G 3 TO SPECIFICATION NO TY:38-105-1225-78 (SUPPLIER IS REQUIRED TO SUPPLY THE FRESHLY PREPARED/MANUFACTURED MATERIALS AND ALSO INDICATE THE SHELF-LIFE AND MANUFACTUROING DATE ON EACH PACKAGES)

SEALANT 51 G 3 TO SPECIFICATION NO TY:38-105-1225-78 (SUPPLIER IS REQUIRED TO SUPPLY THE FRESHLY PREPARED/MANUFACTURED MATERIALS AND ALSO INDICATE THE SHELF-LIFE AND MANUFACTUROING DATE ON EACH PACKAGES)

• FIRM NEEDS TO SUBMIT MANUFACTURING FACILITIES DETAILS FOR SUBJECT ITEM

• FIRM NEEDS TO SUBMIT TESTING FACILITIES DETAILS FOR SUBJECT ITEM

GREEN PUTTY 50M SPEC. OST3-5605-91

GREEN PUTTY 50M SPEC. OST3-5605-91

• FIRM NEEDS TO SUBMIT MANUFACTURING FACILITITES DETAILS FOR TENDERED ITEM

• FIRM NEEDS TO SUBMIT TESTING FACILITITES DETAILS FOR TENDERED ITEM

SEALING PUTTY Y-20A TO SEPCIFATION No. TY:38-105-357-76. (tender's are required to supply us about 0.25 kg sample along with quotations for functional trials and determining the quality of materials ).

SEALING PUTTY Y-20A TO SEPCIFATION No. TY:38-105-357-76. (tender's are required to supply us about 0.25 kg sample along with quotations for functional trials and determining the quality of materials ).

• firm needs to submit details of manufacturing facilities for subject item
• firm needs to submit details of testing facilities for subject item

• firm needs to submit details of testing facilities for subject item

PUTTY-135 P SPECIFICATION NO. OST3-5605-91

PUTTY-135 P SPECIFICATION NO. OST3-5605-91

• FIRM NEEDS TO SUBMIT MANUFACTUROING FACILITIES DETAILS FOR SUBJECT ITEM

• FIRM NEEDS TO SUBMIT TESTING FACILITIES DETAILS FOR SUBJECT ITEM

PARAFFIN WAX IS:4654-74 (EQUIVALANT INDIAN SPECIFICATION H1 (c)-8300-000005 PROTECTIVE PX-6 JSS-019 ADDENDUM-2 GOST-16960-71

PARAFFIN WAX IS:4654-74 (EQUIVALANT INDIAN SPECIFICATION H1 (c)-8300-000005 PROTECTIVE PX-6 JSS-019 ADDENDUM-2 GOST-16960-71

• FIRM NEEDS TO SUBMIT DETAILS OF MANUFACTURING FACILITIES FOR SUBJECT ITEM

• FIRM NEEDS TO SUBMIT DETAILS OF TESTING FACILITIES FOR SUBJECT ITEM

SEMI FINISH CASTING FOR HUB TO DRAWING NO 998 SEMIFINISH 3497 TO BE MANUFACTURED FROM HUB CASTING TO DRAWING NO P 155 HRG 1002 2

SEMI FINISH CASTING FOR HUB TO DRAWING NO 998 SEMIFINISH 3497 TO BE MANUFACTURED FROM HUB CASTING TO DRAWING NO P 155 HRG 1002 2

DRG 998 SEMIFINISH 3497 AND P 155 HRG 1002 2

• AS PER DRG 998 SEMIFINISH 3497 AND P 155 HRG 1002 2

• AS PER 998 SEMIFINISH 3497 AND P 155 HRG 1002 2

MANUFACTURING AND SUPPLY OF PLANETARY CARRIER TO DRAWING NO P 155 HRG 3013 TO BE MANUFACTURED FROM PLANETARY CARRIER CASTING TO DRAWING NO P 155 HRG 3013 2

AS PER DRG NO P 155 HRG 3013 AND P 155 HRG 3013-2

DRG NO P 155 HRG 3013 AND P 155 HRG 3013-2

• AS PER DRG NO P 155 HRG 3013 AND P 155 HRG 3013-2

• DRG NO P 155 HRG 3013 AND P 155 HRG 3013-2 AND MONITORING INSTRUCTIONS

MANUFACTURING and SUPPLY OF BRAKE DRUM TO DRAWING NO P 155 HRG 2058 TO BE MANUFACTURE FROM CASTING FOR BRAKE DRUM TO DRAWING NO P 155 HRG 2058 2

AS PER DRG NO P 155 HRG 2058 AND P 155 HRG 2058 2, MONITORING INSTRUCTIONS

AS PER DRG NO P 155 HRG 2058 AND P 155 HRG 2058 2

• AS PER DRG NO P 155 HRG 2058 AND P 155 HRG 2058 2

• AS PER DRG NO P 155 HRG 2058 AND P 155 HRG 2058 2

A' TWILL JUTE BAGS OF SIZE 600MM LENGTH X 350MM WIDTH HAVING 2 " PINK BAND ACROSS THE WIDTH 10 " BELOW THE TOP FOR BAGGING OF 33 KG OF 12.7 MM BRASS CUPS AS PER SPECIFICATION IS:1943-1995 REAFFIRMED 2016. SEAM & SAFETY STITCHES TO BE DONE BY USING TWO STRAND OF 3 PLY JUTE TWINE & TWO PLY JUTE TWINE RESPECTIVELY.

SPECN.: IS:1943-1995 REAFFIRMED 2016.

NA

• ** NOT AVAILABLE.

• ** NOT AVAILABLE.

‘A' TWILL JUTE BAGS OF SIZE 600MM LENGTH X 350MM WIDTH HAVING 2 "GREEN BAND ACROSS THE WIDTH 10 " BELOW THE TOP FOR BAGGING OF 33 KG OF 7.62 NATO BRASS CUPS AS PER SPECIFICATION IS:1943-1995 REAFFIRMED 2016. SEAM & SAFETY STITCHES TO BE DONE BY USING TWO STRAND OF 3 PLY JUTE TWINE & TWO PLY JUTE TWINE RESPECTIVELY.

SPECN.: IS:1943-1995 REAFFIRMED 2016.

• ** NOT AVAILABLE.

• ** NOT AVAILABLE.