LOWER HAND GUARD ASSY AS PER DRG No K 2040 STAR7 WITH FIRMS MATERIAL FOR TRICHY ASSAULT RIFLE

LOWER HAND GUARD ASSY AS PER DRG No K 2040 STAR7 WITH FIRMS MATERIAL FOR TRICHY ASSAULT RIFLE

K 2040 STAR 7

• AS PER DRAWING ATTACHED

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

POLYCHLOROPRENE COATED NYLON FABRIC DOUBLE TEXTURE KK-600 130 CMS. WIDE. SPECIFICATION NO. :CQAE/9320/1372/f

SPECIFICATION NO. :CQAE/9320/1372/f

• As Per Specification/Drawing

• As Per Specification/Drawing

POLYCHLOROPRENE COATED NYLON FABRIC SINGLE TEXTURE KK-200 130 CMS. WIDE. SPECIFICATION NO. :CQAE/9320/1372/f

SPECN.NO.: CQAE/9320/1372/f

• As Per Specification/Drawing

• As Per Specification/Drawing

PLASTIC SLIDE FASTNERS LIGHT SPECIAL DUTY CLOSE END AUTO LOCK OG 22CM SPECIFICATION: IS:14181-2002(REAFFIRMED-2013) PART 01 TO 03

PLASTIC SLIDE FASTNERS LIGHT SPECIAL DUTY CLOSE END AUTO LOCK OG 22CM SPECIFICATION: IS:14181-2002(REAFFIRMED-2013) PART 01 TO 03

• as per attached list (Manufacturing Technology Files )

• as per attached list (Testing / Inspection Facility Files )

PLASTIC SLIDE FASTNERS LIGHT SPECIAL DUTY CLOSE END AUTO LOCK OG 20CM SPECIFICATION: IS:14181-2002(REAFFIRMED-2013) PART 01 TO 03

PLASTIC SLIDE FASTNERS LIGHT SPECIAL DUTY CLOSE END AUTO LOCK OG 20CM SPECIFICATION: IS:14181-2002(REAFFIRMED-2013) PART 01 TO 03

• as per attached list (Manufacturing Technology Files )

• as per attached list (Testing / Inspection Facility Files )

PLASTIC SLIDE FASTNER LIGHT SPECIAL DUTY CLOSE END AUTO LOCK OG 18CM SPECIFICATION: IS:14181-2002(REAFFIRMED-2013 PART 01 TO 03)

PLASTIC SLIDE FASTNER LIGHT SPECIAL DUTY CLOSE END AUTO LOCK OG 18CM SPECIFICATION: IS:14181-2002(REAFFIRMED-2013 PART 01 TO 03)

• as per attached list (Manufacturing Technology Files )

• as per attached list (Testing / Inspection Facility Files )

Cloth Polyester and Cotton Disruptive pattern 250 GSM for Jungle with Army Logo 152cm (Minimum Width) excluding selvedges. Specification No.:- Provisional Specification no.OCFAV/FABRIC/001(a). As per relevant clause of specification.

Cloth Polyester and Cotton Disruptive pattern 250 GSM for Jungle with Army Logo 152cm (Minimum Width) excluding selvedges. Specification No.:- Provisional Specification no.OCFAV/FABRIC/001(a). As per relevant clause of specification.

• as per attached list (Manufacturing Technology Files )

• as per attached list (Testing / Inspection Facility Files )

SYNTHETIC PLASTIC SLIDE FASTENERS MEDIUM SPECIAL DUTY OPEN END WHITE 80 CM SPECIFICATION:- IS:14181 (PT 1 TO 3) 2002 AMDT NO. - 2, RA 2013

SYNTHETIC PLASTIC SLIDE FASTENERS MEDIUM SPECIAL DUTY OPEN END WHITE 80 CM SPECIFICATION:- IS:14181 (PT 1 TO 3) 2002 AMDT NO. - 2, RA 2013

• as per attached list (Manufacturing Technology Files )

• as per attached list (Testing / Inspection Facility Files )

SYNTHETIC PLASTIC SLIDE FASTENERS MEDIUM SPECIAL DUTY OPEN END WHITE 58 CM SPECIFICATION NO. - IS:14181 (PT. 1 TO 3) 2002 AMDT NO. - 2, RA 2013

SYNTHETIC PLASTIC SLIDE FASTENERS MEDIUM SPECIAL DUTY OPEN END WHITE 58 CM SPECIFICATION NO. - IS:14181 (PT. 1 TO 3) 2002 AMDT NO. - 2, RA 2013

• as per attached list (Manufacturing Technology Files )

• as per attached list (Testing / Inspection Facility Files )

FABRIC NYLON 300 GSM RIPSTOP PU COATED F. R. 152 CMS WIDE SPECN. - IND/TC/0155 AND AS PER ANNEXURE 'A' OF SPECN: NO.S/2532/BAG KIT UNIVERSAL (OG)/TC-6 (a)

FABRIC NYLON 300 GSM RIPSTOP PU COATED F. R. 152 CMS WIDE SPECN. - IND/TC/0155 AND AS PER ANNEXURE 'A' OF SPECN: NO.S/2532/BAG KIT UNIVERSAL (OG)/TC-6 (a)

• as per attached list (Manufacturing Technology Files )

• as per attached list (Testing / Inspection Facility Files )

Polyester Round Mesh Interlining Fabric OG width 102cm (Min.) Specification No. - As per Annexure 'B' of OCFAV/Garment/002(b).

Polyester Round Mesh Interlining Fabric OG width 102cm (Min.) Specification No. - As per Annexure 'B' of OCFAV/Garment/002(b).

• as per attached list (Manufacturing Technology Files )

• as per attached list (Testing / Inspection Facility Files )

FABRICATION OF TROUSER SERGE POLYWOOL 1973 PATTERN (MODIFIED) SPECIFICATION NO. IND/TC/4634(1) AND APPROVED SAMPLE

FABRICATION OF TROUSER SERGE POLYWOOL 1973 PATTERN (MODIFIED) SPECIFICATION NO. IND/TC/4634(1) AND APPROVED SAMPLE

• as per attached list (Manufacturing Technology Files )

• as per attached list (Testing / Inspection Facility Files )

TIMBER CHIR PLANK SIZE- 19 MM X 150 MM X 1.8 METER OR ABOVE AS PER IS-5247 (PART-2) 1982

TIMBER CHIR PLANK SIZE- 19 MM X 150 MM X 1.8 METER OR ABOVE AS PER IS-5247 (PART-2) 1982

• NA

• NA

BOX EJECTOR PROJECTILE 2A TO PART N 8115 000185

BOX EJECTOR PROJECTILE 2A TO PART N 8115 000185

• BOX EJECTOR PROJECTILE 2A TO PART N 8115 000185

• BOX EJECTOR PROJECTILE 2A TO PART N 8115 000185

STEEL BLANKS TO IS:1570(PT.-II)-LATEST VERSION, GRADE 40C8, P60, SIZE 220+0.5MM OD X 190+0.5MM LENGTH, PROOF MACHINED (TURNED & FACED) & ULTRASONICALLY TESTED. ALL CHEMICAL AND MECHANICAL PROPERTIES AS PER IS STANDARD EXCEPT SILICON (SILICON - 0.05% TO 0.35%) item code : 0115708220

IS:1570

• as per spec
• as per spec

• as per spec

STEEL BLANKS TO IS:1570(PT.-II)-LATEST VERSION, GRADE 40C8, P60, SIZE 70+0.5MM OD X 100+0.5MM LENGTH, PROOF MACHINED (TURNED & FACED) & ULTRASONICALLY TESTED. ALL CHEMICAL AND MECHANICAL PROPERTIES AS PER IS STANDARD EXCEPT SILICON (SILICON - 0.05% TO 0.35%) item code 0115708070

TO IS:1570

• as per Spec

• as per Spec

1) COMMERCIAL ALU TO IS:738-1994, DESGN NO.64430,TUBE O/D 31.8 +/-0.2 MM X I/D 25.4 +/- 0.2MM X 1380 +5 MM LENGTH. ITEM CODE : 1) 0600738035

IS:738-1994, DESGN NO.64430

NA

• As per Spec

• As per Spec
• as per PQ

STEEL BLANKS TO IS:1570(PT.-II)-LATEST VERSION, GRADE 40C8, P60, SIZE 190+0.5MM OD X 70+0.5MM LENGTH, PROOF MACHINED (TURNED & FACED) & ULTRASONICALLY TESTED. ALL CHEMICAL AND MECHANICAL PROPERTIES AS PER IS STANDARD EXCEPT SILICON (SILICON - 0.05% TO 0.35%) item code : 0115708190

as per spec

• as per spec

• as per spec

STEEL TUBE TO IS:3601-2006; CDS/HFS 240 O/D 168.3 +/-0.4 MM X 8.0 +/-0.8 MM THICK X 980 +/-1 MM LENG ULTRASONICALLY TESTED. CHEMICAL PROPERTIES AND MECHANICAL PROPERTIES AS PER SPECIFICATIONS item code : 0136010168

as per spec

• as per spec

• as per spec

STEEL BLANKS TO IS:1570(PT.-II)-LATEST VERSION, GRADE 40C8, P60, SIZE 220+0.5MM OD X 80+0.5MM LENGTH, PROOF MACHINED (TURNED & FACED) & ULTRASONICALLY TESTED. ALL CHEMICAL AND MECHANICAL PROPERTIES AS PER IS STANDARD EXCEPT SILICON (SIL ICON - 0.05% TO 0.35%) MATERIAL TEST CERTIFICATE REQUIRED item code : 0115708080

as per spec

• as per spec

• as per spec

PHOSPHORBRONZ EXTRUDED AND DRAWN. 70.MM (2-3/4") DIA ROD TO SPECN. IS.7811/1985

PHOSPHORBRONZ EXTRUDED AND DRAWN. 70.MM (2-3/4") DIA ROD TO SPECN. IS.7811/1985

• NA

• NA

DISC WHEEL TO DRG NO 1015 000810

DISC WHEEL TO DRG NO 1015 000810

• DISC WHEEL TO DRG NO 1015 000810

• DISC WHEEL TO DRG NO 1015 000810

SHAVE OUTER TO PART NO 4018739

SHAVE OUTER TO PART NO 4018739

• SHEAVE OUTER TO PART NO 4018739

• SHEAVE OUTER TO PART NO 4018739

SHAFT TORSION FORGING - 172.51.016/F

AS PER VQC

172.51.016/F

• AS PER VQC

• AS PER VQC

TORSION BAR FORGING (172.51.016-1/F)

AS PER DG

172.51.016-1/F

• AS PER VQC

• AS PER VQC

SEWING THREAD SPUN POLYESTER OG

SPECN NO:IND/TC/0296(b)EXCEPT FORLENGTH/KG (min)(m)-12800, COUNT OF YARN 250 DTEX X3. BREAKING LOAD (MIN)-(50 CM. BETWEEN GRIPS)-23000 MN.FINAL TWIST IS Z PACKING & MARKING : AS PER SCHEDULE NO.CQAT&C/PMS/36(a)

• As Per Specification/Drawing

• As Per Specification/Drawing

CHAPE & LINK ASSEMBLY COMPLETE

Specn. No. IND/GS/1726 ( C)

• As per specification and drawing attached

• Visual
• mechanical
• chemical
• As per specification and drawing attached

WEBBING NYLON 44 MM 2950 KG STEEL GREY

SPECN. IS:4727-1968 Type -1 Except that :- 1) 180 picks/dm +/- 5% (2 picks/shed) 2) No. of folds in weft yarn-1

• As Per Specification/Drawing

• As Per Specification/Drawing

TAPE NYLON 66, 26 MM BS 850 KGF U/D, RESIN TREATED 1.5 TO 2.5%

Updated Specification No. ADRDE/Specn/2000/54(e) received vide ADRDE, Agra letter No. ADRDE/QMS/TG(TE)/24 dtd : 30/07/2021.

• As Per Specification/Drawing

• As Per Specification/Drawing

FABRICATION OF RTU-1000 Lbs

AS PER DRG. NO. ADRDE/1041 (f)

• As Per Specification/Drawing

• As Per Specification/Drawing

PCB(ASSEMBLED UNIT) AS PER DRG.NO. BG29-4S.150

PCB(ASSEMBLED UNIT) AS PER DRG.NO. BG29-4S.150

AS PER DRG.NO. BG29-4S.150

• AS PER DRAWING

• AS PER DRAWING

PCB(ASSEMBLED UNIT) AS PER DRG.NO. BG29-4S.140

PCB(ASSEMBLED UNIT) AS PER DRG.NO. BG29-4S.140

AS PER DRG.NO. BG29-4S.140

• AS PER DRAWING

• AS PER DRAWING

PCB(ASSEMBLED UNIT) AS PER DRG.NO. BG29-4S.130

PCB(ASSEMBLED UNIT) AS PER DRG.NO. BG29-4S.130

AS PER DRG.NO. BG29-4S.130

• AS PER DRAWING

• AS PER DRAWING

PCB(ASSEMBLED UNIT) AS PER DRG.NO. BG29-4S.120

PCB(ASSEMBLED UNIT) AS PER DRG.NO. BG29-4S.120

AS PER DRG.NO. BG29-4S.120

• AS PR DRAWING

• AS PER DRAWING

PCB(ASSEMBLED UNIT) AS PER DRG.NO. BG29-4S.110

PCB(ASSEMBLED UNIT) AS PER DRG.NO. BG29-4S.110

AS PER DRG.NO. BG29-4S.110

• AS PER DRAWING

• AS PER DRAWING

Muzzle Tube Cover-SR, Launcher Assembly SR, Launcher Kavach Mod-II, to Drg. No. 1109-1015-13

Muzzle Tube Cover-SR, Launcher Assembly SR, Launcher Kavach Mod-II, to Drg. No. 1109-1015-13

1109-1015-13

• Manufacturing Facilities Involved: • Injection Moulding • Die Making In case the tenderer is outsourcing any/some of the above activities, copy of agreement with such source shall be submitted. The Injection Moulding Facility is mandatory.

• Inspection Facilities Involved: • Standard Measuring Instruments & Gauges • Material Testing Facility with NABL Accreditation • Load Testing Facility as per Drawing Tenderer shall satisfy / declare the required inspection facilities are available either in-house or outsourced.

SHIELD TO 184.04.019 TO 6201004089

SHIELD TO 184.04.019 TO 6201004089

SHIELD TO 184.04.019

• ENCLOSED
• ENCLOSED
• ENCLOSED
• ENCLOSED
• ENCLOSED

• ENCLOSED
• ENCLOSED
• ENCLOSED
• ENCLOSED
• ENCLOSED

MANUFACTURE AND SUPPLY OF BARREL BLANK BEFORE COLD SWAGING WITH CHAMBER TO DRG NO TEND 2226STR 2 FROM OFT MATERIAL

MANUFACTURE AND SUPPLY OF BARREL BLANK BEFORE COLD SWAGING WITH CHAMBER TO DRG NO TEND 2226STR 2 FROM OFT MATERIAL

TEND 2226 STAR 2

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

CONNECTING ROD LF 7440205911

CONNECTING ROD LF 7440205911

BL8352489

• MECHANICAL COMPONENT

• MECHANICAL COMPONENT

CONNECTING ROD LF 7440205910

CONNECTING ROD LF 7440205910

BL8352488

• MECHANICAL COMPONENT

• MECHANICAL COMPONENT

BODY LF 7433511003

BODY LF 7433511003

AU8020353

• MECHANICAL COMPONENT

• MECHANICAL COMPONENT

COVER LF 7431411001

COVER LF 7431411001

AU8040118

• MECHANICAL COMPONENT

• MECHANICAL COMPONENT

INVESTMENT CASTING FOR SLEEVE LF 9927098801

INVESTMENT CASTING FOR SLEEVE LF 9927098801

T-01/IC/8212380/237 M1

• MECHANICAL COMPONENT

• MECHANICAL COMPONENT

FLANGE CASTING LF 7520121400

FLANGE CASTING LF 7520121400

T-01/IC/8231305/214

• MECHANICAL COMPONENT

• MECHANICAL COMPONENT

SOAP SOFT IN THE FORM OF FLAKES TO DGQA SPCN IND/SL/3021 (C) PACKED IN WATER PROOF BAGS OF 20 KG CAPACITY, FOR LUBRICATION IN DEEP DRAW PROCESS OF VARIOUS TYPES OF CARTG.CASES & CUPS.

SOAP SOFT IN THE FORM OF FLAKES TO DGQA SPCN IND/SL/3021 (C)

• *

• *

CHROMIUM TRIOXIDE, GRADE-I CrO3-98.5% min, Matter insoluble in water 0.15% max, Sulphate 0.2% max, Alkali Salts 0.3% max, Chlorides 0.05% max..

IS-330-1992 (Re-affirmed-2013).

• *

• *

POLYTHENE PROTECTIVE BAG FOR PACKING OF CARTG CASE 105 MM IFG.

JSS;9330-03-2014 REV NO.3, L.D.P.E GRADE TYPE 1.

OFA DRG.NO.RW142/SK/0801/C DT.24.02.2004 AMENDED UPTO 10/02/16.

• REFER FILE UPLOADED.

• REFER FILE UPLOADED.

MAGAZINE SUB ASSY IN F/C AS PER DRG DRG NO CTM-0175

MAGAZINE SUB ASSY IN F/C AS PER DRG DRG NO CTM-0175

CTM-0175

• AS PER ATTACHMENT

• AS PER ATTACHMENT

HAMMER IN F/C AS PER DRG. NO. CTM-0174

HAMMER IN F/C AS PER DRG. NO. CTM-0174

CTM-0174

• AS PER ATTACHMENT

• AS PER ATTACHMENT

RECEIVER IN F/C AS PER DRG NO. CTM 0178/1 TO 0178/2

RECEIVER IN F/C AS PER DRG NO. CTM 0178/1 TO 0178/2

CTM-0178/1 TO CTM-0178/2

• AS PER ATTACHMENT

• AS PER ATTACHMENT

CABLE NO. 1 FOR 50 PINS Drg No.MRS.04.00.200 CABLE NO. 1 WITH CONNECTOR FOR 50 PINS AS PER DRG.NO. MRS.04.00.200

CABLE NO. 1 FOR 50 PINS Drg No.MRS.04.00.200 CABLE NO. 1 WITH CONNECTOR FOR 50 PINS AS PER DRG.NO. MRS.04.00.200

CABLE NO. 1 FOR 50 PINS Drg No.MRS.04.00.200 CABLE NO. 1 WITH CONNECTOR FOR 50 PINS AS PER DRG.NO. MRS.04.00.200

• ELECTRONIC ITEM

• ELECTRONIC ITEM

CABLE NO.2 Drg No.AL6.641.057 CABLE NO.2 TO DRG.NO.AL6.641. 057,FOR POWER UNIT OF 1G46

CABLE NO.2 Drg No.AL6.641.057 CABLE NO.2 TO DRG.NO.AL6.641. 057,FOR POWER UNIT OF 1G46

CABLE NO.2 Drg No.AL6.641.057 CABLE NO.2 TO DRG.NO.AL6.641. 057,FOR POWER UNIT OF 1G46

• ELECTRONIC ITEM

• ELECTRONIC ITEM

CABLE NO.1 Drg No.AL6.641.056 CABLE NO.1 TO DRG.NO.AL6.641. 056,FOR POWER UNIT OF 1G46

CABLE NO.1 Drg No.AL6.641.056 CABLE NO.1 TO DRG.NO.AL6.641. 056,FOR POWER UNIT OF 1G46

CABLE NO.1 Drg No.AL6.641.056 CABLE NO.1 TO DRG.NO.AL6.641. 056,FOR POWER UNIT OF 1G46

• ELECTRONIC ITEM

• ELECTRONIC ITEM

HIGH VOLTAGE CONVERTER Drg No.BL3211030 HIGH VOLTAGE CONVERTER VPN-30 TO DRG.NO.BL3211030

HIGH VOLTAGE CONVERTER Drg No.BL3211030 HIGH VOLTAGE CONVERTER VPN-30 TO DRG.NO.BL3211030

HIGH VOLTAGE CONVERTER Drg No.BL3211030 HIGH VOLTAGE CONVERTER VPN-30 TO DRG.NO.BL3211030

• ELECTRONIC ITEM

• ELECTRONIC ITEM

SUPPLY OF MAGAZINE 7.62mm.2A (ICR 84A) DC.NO.22245SA DT.15.07.93 CONSISTING OF ICR 91SA,DC NO.22756-SA DT.12.12.94& ICR 90SA, DC.No.22540-SA DT:20.05.94 & DS CAT NO. 1005-000344, DC NO.26829-SA DT.11.05.16. FOR DC NO. LATEST ISSUE TO BE FOLLOWED. (LF No. 7011655335)

SUPPLY OF MAGAZINE 7.62mm.2A (ICR 84A) DC.NO.22245SA DT.15.07.93 CONSISTING OF ICR 91SA,DC NO.22756-SA DT.12.12.94& ICR 90SA, DC.No.22540-SA DT:20.05.94 & DS CAT NO. 1005-000344, DC NO.26829-SA DT.11.05.16. FOR DC NO. LATEST ISSUE TO BE FOLLOWED. (LF No. 7011655335)

ICR 84A

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

SUPPLY OF MAGAZINE 7.62mm.2A (ICR 84A) DC.NO.22245SA DT.15.07.93 CONSISTING OF ICR 91SA,DC NO.22756-SA DT.12.12.94& ICR 90SA, DC.No.22540-SA DT:20.05.94 & DS CAT NO. 1005-000344, DC NO.26829-SA DT.11.05.16. FOR DC NO. LATEST ISSUE TO BE FOLLOWED. (LF No. 7011655335)

SUPPLY OF MAGAZINE 7.62mm.2A (ICR 84A) DC.NO.22245SA DT.15.07.93 CONSISTING OF ICR 91SA,DC NO.22756-SA DT.12.12.94& ICR 90SA, DC.No.22540-SA DT:20.05.94 & DS CAT NO. 1005-000344, DC NO.26829-SA DT.11.05.16. FOR DC NO. LATEST ISSUE TO BE FOLLOWED. (LF No. 7011655335)

ICR 84A

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

FABRIC PLAIN SILK FINE, UNPROOFED, UNBLEACHED GSM BETWEEN 40 TO 50.88 GM SPECN. JSS-8305-22-2017 (REV NO. 4) FOR FUZE DASD OF AK-630 AMMN. (NAVY)

FABRIC PLAIN SILK FINE, UNPROOFED, UNBLEACHED GSM BETWEEN 40 TO 50.88 GM SPECN. JSS-8305-22-2017 (REV NO. 4) FOR FUZE DASD OF AK-630 AMMN. (NAVY)

• as per attached documents

• as per attached documents.

BRACKET TO DRAWING NO.1147762

BRACKET TO DRAWING NO.1147762

• AS PER TENDER DOCUMENT ANNEXURE L

• AS PER TENDER DOCUMENT ANNEXURE L

BRACKET TO DRAWING NO.1147761

BRACKET TO DRAWING NO.1147761

• AS PER TENDER DOCUMENT ANNEXURE L

• AS PER TENDER DOCUMENT ANNEXURE L

BRACKET TO DRAWING NO.1147152

BRACKET TO DRAWING NO.1147152

• as per tender document annexure l

• as per tender document annexure l

BRACKET TO DRG.NO.4076048

BRACKET TO DRG.NO.4076048.

• as per Annexure L

• as per Annexure L

Micro Switch Part no. DC-2C x G09, 10 .1A/Part No. DC-2C-E5RC ENEC 05-10, 1A, 125 -250 VAC, 1/4HP, 125VAC, Make: ZF Electronics, Qty: 688 Nos.

Micro Switch Part no. DC-2C x G09, 10 .1A/Part No. DC-2C-E5RC ENEC 05-10, 1A, 125 -250 VAC, 1/4HP, 125VAC, Make: ZF Electronics, Qty: 688 Nos.

• Manufacturing Technology: (1) Soldering (2) Moulding

• Testing Equipment: (1) Multimeter (2) Insulation Tester

COCKING ARM AS PER DRG NO 36P 4101 WITH FIRMS MATERIAL

COCKING ARM AS PER DRG NO 36P 4101 WITH FIRMS MATERIAL

36P 4101

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

LOW TEMPERATURE PVC COMPOUND[NATURAL COLOUR]WITHSTAND UPTO -55DEG.CENT. AS PER ENCLOSED OCFC, SPECIFICATION NO.04 ISSUE NO.01 DATED 16/05/2006 REVISION NO.02 DATED07/09/2017

ATTACHED

• As per attachment.
• As per attachment.
• As per attachment.
• As per attachment.
• As per attachment.

• As per attachment.
• As per attachment.
• As per attachment.
• As per attachment.
• As per attachment.

Carbon tape 19 mm

Carbon tape 19 mm

As per attachment.

• As per attachment.
• As per attachment.
• As per attachment.
• As per attachment.
• As per attachment.

• As per attachment.
• As per attachment.
• As per attachment.
• As per attachment.
• As per attachment.

STAINLESS STEEL WIRES 0.381MM DIA AS PER SPECIFICATION MSCQ-5/STAINLESS STEEL

STAINLESS STEEL WIRES 0.381MM DIA AS PER SPECIFICATION MSCQ-5/STAINLESS STEEL

As per attachment.

• As per attachment.
• As per attachment.
• As per attachment.
• As per attachment.
• As per attachment.

• As per attachment.
• As per attachment.
• As per attachment.
• As per attachment.
• As per attachment.

CORD. NYLON 1785 N B.L. WHITE

SPECN NO:JSS:4020-9-2013, ( Required Roll Length 337 M excluding test sample ) Except that:- in appearance and all other respects not defined in this specn, the material shall conform to the sealed sample held in the costody the controller, CQAT&C, KANPUR (iii)Packing and marking Sampling Plan & Criteria of conformity As per relevant clause of specn. (iv)Pre inspection, warranty and Advance sample Clause as per specification.

• As Per Specification/Drawing

• As Per Specification/Drawing

GUARD HAND LEFT & RIGHT ASSY. (PLASTIC) No.2, CQA(SA)/91, D.S.CAT.No.1005-007723,D.C.No.22706-SA Dt.5-11-94 IMPROVED VERSION FOR RIFLE 7.62mm 1A1 TO D.S.CAT.No.: 1005-007505, 1005-007506,1005-007507,1005-001593,1005-1718, 5305-005008, 5310-003171. LATEST D.C.No. TO BE FOLLOWED. 1005-007504,

AS PER D.S.CAT.No.1005-007723,D.C.No.22706-SA Dt.5-11-94 IMPROVED VERSION FOR RIFLE 7.62mm 1A1 TO D.S.CAT.No.: 1005-007505, 1005-007506,1005-007507,1005-001593,1005-1718, 5305-005008, 5310-003171

D.S.CAT.No.1005-007723,D.C.No.22706-SA Dt.5-11-94 IMPROVED VERSION FOR RIFLE 7.62mm 1A1 TO D.S.CAT.No.: 1005-007505, 1005-007506,1005-007507,1005-001593,1005-1718, 5305-005008, 5310-003171

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

PACKING BOX 9SH 119 LF NO 9927081835

PACKING BOX 9SH 119 LF NO 9927081835

• PACKING BOX

• PACKING BOX

PACKING BOX FOR BLOCK D LF NO 7445108002

PACKING BOX FOR BLOCK D LF NO 7445108002

• PACKING BOX

• PACKING BOX

CARRYING BOX CTI T 72 MA /59M2 LF NO 1460401124

CARRYING BOX CTI T 72 MA /59M2 LF NO 1460401124

• PACKING BOX

• PACKING BOX

TRANSFORMER TPP 12-40-400 Drg No.OUO.471.000 TU TRANSFORMER TPP 12-40-400 AS P ER SPECN. NO. OUO.471.000 TU

TRANSFORMER TPP 12-40-400 Drg No.OUO.471.000 TU TRANSFORMER TPP 12-40-400 AS P ER SPECN. NO. OUO.471.000 TU

TRANSFORMER TPP 12-40-400 Drg No.OUO.471.000 TU TRANSFORMER TPP 12-40-400 AS P ER SPECN. NO. OUO.471.000 TU

• ELECTRONIC ITEM

• ELECTRONIC ITEM

SOCKET SNO 53-60/95X9R-2-V Drg No.BRO.364.006 TU SOCKET SNO 53-60/95X9R-2-V TO SPC.NO.BRO.364.006TU,FOR POWER UNIT OF 1G46 _____________________________________________

SOCKET SNO 53-60/95X9R-2-V Drg No.BRO.364.006 TU SOCKET SNO 53-60/95X9R-2-V TO SPC.NO.BRO.364.006TU,FOR POWER UNIT OF 1G46 _____________________________________________

SOCKET SNO 53-60/95X9R-2-V Drg No.BRO.364.006 TU SOCKET SNO 53-60/95X9R-2-V TO SPC.NO.BRO.364.006TU,FOR POWER UNIT OF 1G46 _______________________________

• ELECTRONICS ITEMS

• ELECTRONICS ITEMS

SOCKET 2RMT24B19G1V1 Drg No.GEO364126TY SOCKET 2RMT24B19G1V1 TO SPEC.N O.GEO.364.126TY,FOR POWER UNI OF 1G46

SOCKET 2RMT24B19G1V1 Drg No.GEO364126TY SOCKET 2RMT24B19G1V1 TO SPEC.N O.GEO.364.126TY,FOR POWER UNI OF 1G46

SOCKET 2RMT24B19G1V1 Drg No.GEO364126TY SOCKET 2RMT24B19G1V1 TO SPEC.N O.GEO.364.126TY,FOR POWER UNI OF 1G46

• ELECTRONIC ITEM

• ELECTRONIC ITEM

PLUG 2RMG22B10SH1E2 Drg No. GEO 364140TY PLUG 2RMG22B10SH1E2 TO SPEC.N O.GEO.364.140 TY,FOR POWER UNIT OF 1G46

PLUG 2RMG22B10SH1E2 Drg No. GEO 364140TY PLUG 2RMG22B10SH1E2 TO SPEC.N O.GEO.364.140 TY,FOR POWER UNIT OF 1G46

PLUG 2RMG22B10SH1E2 Drg No. GEO 364140TY PLUG 2RMG22B10SH1E2 TO SPEC.N O.GEO.364.140 TY,FOR POWER UNIT OF 1G46

• ELECTRONIC ITEM

• ELECTRONIC ITEM

PLUG 2RMDT45B50SH8V1V Drg No.GEO364126TY PLUG 2RMDT45B50SH8V1V TO SPEC. NO.GEO.364.126TY,FOR POWER UN OF 1G46

PLUG 2RMDT45B50SH8V1V Drg No.GEO364126TY PLUG 2RMDT45B50SH8V1V TO SPEC. NO.GEO.364.126TY,FOR POWER UN OF 1G46

PLUG 2RMDT45B50SH8V1V Drg No.GEO364126TY PLUG 2RMDT45B50SH8V1V TO SPEC. NO.GEO.364.126TY,FOR POWER UN OF 1G46

• ELECTRONIC ITEM

• ELECTRONIC ITEM

PLUG 2RMT42B50SH2V1V Drg No. GEO364126TY PLUG 2RMT42B50SH2V1V TO SPC.NO .GEO364126TY,FOR POWER UNIT OF 1G46

PLUG 2RMT42B50SH2V1V Drg No. GEO364126TY PLUG 2RMT42B50SH2V1V TO SPC.NO .GEO364126TY,FOR POWER UNIT OF 1G46

PLUG 2RMT42B50SH2V1V Drg No. GEO364126TY PLUG 2RMT42B50SH2V1V TO SPC.NO .GEO364126TY,FOR POWER UNIT OF 1G46

• ELECTRONIC ITEM

• ELECTRONIC ITEM

CORE M2000 NM1-27 B18 II Drg No.PYO.707.231 TU CORE M2000 NM1-27 B18 II AS PER SPECN. NO. PYO.707.231 TU

CORE M2000 NM1-27 B18 II Drg No.PYO.707.231 TU CORE M2000 NM1-27 B18 II AS PER SPECN. NO. PYO.707.231 TU

CORE M2000 NM1-27 B18 II Drg No.PYO.707.231 TU CORE M2000 NM1-27 B18 II AS PER SPECN. NO. PYO.707.231 TU

• ELECTRONIC ITEM

• ELECTRONIC ITEM

RELAY REK60V,RVIM647612.027-05 Drg No.RVIM647612.027 TU RELAY REK-60V, RVIM647612.027- 05 AS PER SPECN. NO. RVIM647612.027 TU

RELAY REK60V,RVIM647612.027-05 Drg No.RVIM647612.027 TU RELAY REK-60V, RVIM647612.027- 05 AS PER SPECN. NO. RVIM647612.027 TU

RELAY REK60V,RVIM647612.027-05 Drg No.RVIM647612.027 TU RELAY REK-60V, RVIM647612.027- 05 AS PER SPECN. NO. RVIM647612.027 TU

• ELECTRONIC ITEM

• ELECTRONIC ITEM

TRANSFORMER TO.5-15 Drg No.OUO.472.021 TY TRANSFORMER TO.5-15 AS PER SPE CN. NO. OUO.472.021 TY

TRANSFORMER TO.5-15 Drg No.OUO.472.021 TY TRANSFORMER TO.5-15 AS PER SPE CN. NO. OUO.472.021 TY

TRANSFORMER TO.5-15 Drg No.OUO.472.021 TY TRANSFORMER TO.5-15 AS PER SPE CN. NO. OUO.472.021 TY

• ELECTRONIC ITEM

• ELECTRONIC ITEM