FORGING FOR SUN GEAR FG-765-15-5-3

AS PER DRG FG-765-15-5-3

• AS PER DRG FG-765-15-5-3

• AS PER DRG FG-765-15-5-3

lock as per olf std 243

lock as per olf std 243

lock as per olf std 243

• AS PER OFB LETTER ANNXURE 1

• AS PER OFB LETTER ANNEXU8RE 1

CARRIER FORGING TO DRG NO 765 -15-156- 3

AS PER DRG NO 765 -15-156- 3

DRG NO 765 -15-156- 3

• AS PERDRG NO 765 -15-156- 3

• AS PER DRG NO 765 -15-156- 3

Bomb Assembly (Empty) for 500Kg GP Bomb

Bomb Assembly (Empty) for 500Kg GP Bomb

• uploaded

• uploaded

Rolling Ring Assembly for 500Kg GP Bomb

Rolling Ring Assembly for 500Kg GP Bomb

• UPLOADED

• Uploaded

Tape Nylon 15 mm BS 185 KG U/D

The Tape shall be in continuous length of 110 M (Excluding Sampling) Without Any Flag Otherwise That Roll Be Treated As Short Length. ADRDE/QMS/TGTE/T/2019/02 Date: 10/05/2019

• As per Specification/Drawing

• As per Specification/Drawing

SQUIB PLUG (BRIDGED) (EMPTY) FOR CONTAINER CLEANING CHARGE TO DRAWING NO ARDE 9707 00 01 0104 004 12TB FOR INFLUENCE MINE MK-II FILLING AND ASSEMBLY

SQUIB PLUG (BRIDGED) (EMPTY) FOR CONTAINER CLEANING CHARGE TO DRAWING NO ARDE 9707 00 01 0104 004 12TB FOR INFLUENCE MINE MK-II FILLING AND ASSEMBLY

• 1. Injection Moulding 2. Lathe 3. Drilling 4. Gold plating as per spec 5. Multimeter

• 1. Non- Continuity test(Multimeter) 2. Plating thickness 3. General Engineering Equipment for measurement

EMPTY ASSY OF DETONATOR ELECTRIC CONSISTING OF (A) DETONATOR TUBE ARDE DRG NO 9707 00 01 01 07 001 00TA (B) SQUIB PLUG EMPTY ARDE DRG NO 9707 00 01 01 07 002 12TBC PROTECTIVE CAP FOR SQUIB PLUG DETONATOR ARDE DRG NO 970700 01 01 07 003 12TA

EMPTY ASSY OF DETONATOR ELECTRIC CONSISTING OF (A) DETONATOR TUBE ARDE DRG NO 9707 00 01 01 07 001 00TA (B) SQUIB PLUG EMPTY ARDE DRG NO 9707 00 01 01 07 002 12TBC PROTECTIVE CAP FOR SQUIB PLUG DETONATOR ARDE DRG NO 970700 01 01 07 003 12TA

EMPTY ASSY OF DETONATOR ELECTRIC CONSISTING OF (A) DETONATOR TUBE ARDE DRG NO 9707 00 01 01 07 001 00TA (B) SQUIB PLUG EMPTY ARDE DRG NO 9707 00 01 01 07 002 12TBC PROTECTIVE CAP FOR SQUIB PLUG DETONATOR ARDE DRG NO 970700 01 01 07 003 12TA

• 1. Hydraulic/Mechanical Press 2. Injection Moulding 3. Multimeter 4. Lathe 5. Gold/Silver plating 6.Soldering 7.Drilling/Tapping

• 1. Electrical non-conductivity of pins 2. Plating thickness 3. Non-conductivity test 4. n-heptane test 5.Thread gauge 6. General Engineering Equipment for measurement

CONTAINER CLEARING CHARGE (EMPTY ASSY.) TO DRAWING NO. ARDE9707 00 01 01 17 000 00TA FOR INFLUENCE MINE MK-II - FILLINGAND ASSEMBLY.

CONTAINER CLEARING CHARGE (EMPTY ASSY.) TO DRAWING NO. ARDE9707 00 01 01 17 000 00TA FOR INFLUENCE MINE MK-II - FILLINGAND ASSEMBLY.

• Manufacturing Technology : 1. Injection Moulding 2. Air Tightness Test Apparatus 3. Multimeter 4. Lathe 5. Gold plating as per specn

• Inspection Technology 1. Non continuity test (Multimeter) 2. Air tightness Test 3. n-heptane test 4. Water Leakage test 5.Plating Thickness 6. General Engineering Equipment for measurement

PACKING BOX FOR SHAPED CHARGE 90MM CONSISTING OF10 COMPONENTS TO DRG NO. HE/CAST 086 DET 1 TO 10(EXCLUDING 90MM SHAPED CHARGE & SET OF LEGS) & QAP NO. HEMRL/HE/ADD/08/01 REV. 00 OF 09/2008

PACKING BOX FOR SHAPED CHARGE 90MM CONSISTING OF10 COMPONENTS TO DRG NO. HE/CAST 086 DET 1 TO 10(EXCLUDING 90MM SHAPED CHARGE & SET OF LEGS) & QAP NO. HEMRL/HE/ADD/08/01 REV. 00 OF 09/2008

• 1. Timber processing Unit (Cutting, Finishing,Polishing,Painting) 2. Pressure impregnation plant for preservative treatment (As per specification IA 948)

• 1. Jolt Test 2. Drop Test 3. Stacking test 4. Preservative penetration test 5.Dimensional checking facility 6. Moisture test

Slider Breech Block DRG No 0204 03 04 00 00 001 00DA for JVPC 5 56 mm MIM Route

Slider Breech Block DRG No 0204 03 04 00 00 001 00DA for JVPC 5 56 mm MIM Route

DRG No 0204 03 04 00 00 001 00DA for JVPC 5 56 mm MIM Route

• MIM ROUTE
• Chemical and mechanical properties as per std. given drawing.

• Chemical and mechanical properties as per std. given drawing.
• Dimensional inspection, for all dimensions given in the drawing and other parameter which are mentioned in relevant drawing.

LEVER CATCH MAGAZINE DRG NO. 0204 03 04 02 14 014 00DE FOR JVPC 5.56MM (MIM ROUTE)

DRG NO. 0204 03 04 02 14 014 00DE FOR JVPC 5.56MM

DRG NO. 0204 03 04 02 14 014 00DE FOR JVPC 5.56MM

• MIM ROUTE

• Chemical and mechanical properties as per std. given drawing.
• Dimensional inspection, for all dimensions given in the drawing and other parameter which are mentioned in relevant drawing.

Piece Guide for JVPC 5.56MM through MIM Route DRG. No. 0204 03 04 19 23 002 00DA

Piece Guide for JVPC 5.56MM through MIM Route DRG. No. 0204 03 04 19 23 002 00DA

0204 03 04 19 23 002 00DA

• MIM ROUTE

• Chemical and mechanical properties as per std. given drawing.
• Dimensional inspection, for all dimensions given in the drawing and other parameter which are mentioned in relevant drawing.

Rear sight Drg no. 0204 03 04 00 01 005 00DA for JVPC 5.56MM (MIM Route)

Rear sight Drg no. 0204 03 04 00 01 005 00DA for JVPC 5.56MM (MIM Route)

0204 03 02 00 01 005 00DD

• MIM ROUTE

• Chemical and mechanical properties as per std. given drawing.
• Dimensional inspection, for all dimensions given in the drawing and other parameter which are mentioned in relevant drawing.

PULL THROUGH 5.56MM1A (NYLON) TO DS CAT NO. 1005-557944 DC(I) NO. 26532-SA , DT. 30-07-10

PULL THROUGH 5.56MM1A (NYLON) TO DS CAT NO. 1005-557944 DC(I) NO. 26532-SA , DT. 30-07-10

• Machining & assy.

• as per attached document

ALUMINIUM KEEL IN 3 INTERLOCKING SECTION COMPLETE WITH LOCKING PLATE & FASTENERS

ALUMINIUM as per IS 737, Marine Grade Locking Plate, Keel Hook and Nut & Bolt SS 316 Grade As per NCD 4006 Issu-3 Mar 2014

• As per Specification/Drawing

• As per Specification/Drawing

LINKAGE SYSTEM PART NO 1137083

LINKAGE SYSTEM AS PER THE DESCRIPTION AND BILL OF MATERIAL (enclosed) OF PART NO 1137083.

• AS PER ANNEXURE L

• AS PER ANNEXURE L

LOADING PENDULAM TO PART NO.1145142

LOADING PENDULAM TO PART NO.1145142 (EXCLUDING HYDRAULIC CYLINDER LOADING TRAY-1145452)

• AS PER ANNEXURE L

• AS PER ANNEXURE L

DRAWBAR TO PT.NO.1143440

DRAWBAR TO PT.NO.1143440, AS PER ANNEXURE NO. DHANUSH/ 1143440/2017.

• AS PER ANNEXURE L

• DRAWBAR TO PT.NO.1143440

9081001538 COLLAPSIBLE YOKE TO PART NO 6387168

9081001538 COLLAPSIBLE YOKE TO PART NO 6387168

• AS PER ANNEXURE L

• AS PER ANNEXURE L

CASTOR WHEEL ARM RIGHT PT NO1130431

CASTOR WHEEL ARM RIGHT PT NO1130431

• AS PER ANNEXURE L

• AS PER ANNEXURE L

CASTOR WHEEL ARM LEFT PT NO 1130430.

CASTOR WHEEL ARM LEFT PT NO 1130430.

• AS PER ANNEXURE L

• AS PER ANNEXURE L

COPPER WIRE ROD 7.9/8MM DIA AS PER SPECIFICATION IS 12444:1988

COPPER WIRE ROD 7.9/8MM DIA AS PER SPECIFICATION IS 12444:1988

SPECIFICATION IS 12444:1988

• Refer to attachment
• AS PER ATTACHMENT.
• AS PER ATTACHMENT.
• AS PER ATTACHMENT.
• AS PER ATTACHMENT.

• Refer to attachmentAS PER ATTACHMENT.
• AS PER ATTACHMENT.
• AS PER ATTACHMENT.
• AS PER ATTACHMENT.
• AS PER ATTACHMENT.

OILER HAND NO.1 MK1 FOR GUN M /C (MAG) 7.62MM 2A DS-CATNO.4930-000799 DC(I)NO.25144-SA DATED 11-10-2001

OILER HAND NO.1 MK1 FOR GUN M /C (MAG) 7.62MM 2A DS-CATNO.4930-000799 DC(I)NO.25144-SA DATED 11-10-2001

DS-CATNO.4930-000799

• Machining and Fabrication work

• Chemical and Mechanical prosperities as per std. given drawing
• Dimensional inspection, for all dimensions given in the drawing and other parameter which are mentioned in relevant drawing.

SECONDRY REFIND AOD/VOD QUALITY STEEL ROD 46 MM DIA CONFORMING G TO THE SPECIFICTION JSS 9510-06:2000 (REV NO.3)CODE REF "B" IN HOT ROLLED,ANNEALED AND PEELED CONDT. IN MULTIPLE OF 413MM LENGTH TEST PIECETO BE TESTED IN T-1 CONDTION.MACROET- CH TESTING TO CON IS 13015:1991 & NMIR TEST (ANNEXURE-A ENCL)

SECONDRY REFIND AOD/VOD QUALITY STEEL ROD 46MM DIA CONFORMING G TO THE SPECIFICTION JSS 9510-06:2000 (REV NO.3)CODE REF "B" IN HOT ROLLED,ANNEALED AND PEELED CONDT. IN MULTIPLE OF 413MM LENGTH TEST PIECETO BE TESTED IN T-1 CONDTION.MACROET- CH TESTING TO CON IS 13015:1991 & NMIR TEST (ANNEXURE-A ENCL)

SPECIFICATION JSS 9510-06:2000 (REV NO.3)CODE REF "B"

• Melting and Rolling

• Chemical and Mechnacial properties as per std.given drawing

QUICK RELEASE CONNECTOR (FOR PILOT PARA JAGUAR A/C.)

SPCN.NO.AS PER ADRDE/1455

• As per Specification/Drawing

• As per Specification/Drawing

MINE DRILL APERS M14 WITH FZ INTGL(E) ASS.& PKD IN APPD.PKG.5RG ITX 14GA DC 36985A/14-10-04,SPCN.CQA(A)1828(C) DC 37095A/27-2-07.PKD AMN 70B/L DRG ISV 221GA DC36250A/4-3-97SPCN PKGIA948(A,K)DC 36868A/29-11-02,MKG.& PTG.CRATE 2A BY LAT.DRGORCIA/AMN/STENCIL/77,DSCAT8140-0000,CIA/AMN/610 TO ISV 309A

MINE DRILL APERS M14 WITH FZ INTGL(E) ASS.& PKD IN APPD.PKG.5RG ITX 14GA DC 36985A/14-10-04,SPCN.CQA(A)1828(C) DC 37095A/27-2-07.PKD AMN 70B/L DRG ISV 221GA DC36250A/4-3-97SPCN PKGIA948(A,K)DC 36868A/29-11-02,MKG.& PTG.CRATE 2A BY LAT.DRGORCIA/AMN/STENCIL/77,DSCAT8140-0000,CIA/AMN/610 TO ISV 309A

• 1. Injection Moulding 2. Galvanizing & chromate passivation as per specification 3. Heat Treatment 4. Pressurized Preservative impregnation plant (As per specification IA948)

• 1. n-heptane/Glacial acetic acid test as per specification 2. Spring load test 3. Rust proof test as per specn 4. General purpose engineering equipment’s to measure dimensions like Micrometre, vernier caliper, Height gauge. 5. Thread gauge 6. Jolt drop for wood packaging. 7. Depth of penetration for wood preservative.

BOOSTER SUB ASSEMBLY WITH SET BACK MECHANISM TO CQA(A) DRG. NO.13021-0-0.DC(I). NO.35218-A DT.13-11-91. WITH CUP BOOSTER TO CQA(A) DRG.NO.13032-0-0.DC(I). NO.36804-A DT.1-1-02.SPECN. NO. MIL-F-46996 B(MU),AIDEMEMOIRE B/14 AND CQA(A)PROOF SCHEDULE NO. CQA (A)/PS/FZ/120/5 (PROVISIONAL)

BOOSTER SUB ASSEMBLY WITH SET BACK MECHANISM TO CQA(A) DRG. NO.13021-0-0.DC(I). NO.35218-A DT.13-11-91. WITH CUP BOOSTER TO CQA(A) DRG.NO.13032-0-0.DC(I). NO.36804-A DT.1-1-02.SPECN. NO. MIL-F-46996 B(MU),AIDEMEMOIRE B/14 AND CQA(A)PROOF SCHEDULE NO. CQA (A)/PS/FZ/120/5 (PROVISIONAL)

BOOSTER SUB ASSEMBLY WITH SET BACK MECHANISM TO CQA(A) DRG. NO.13021-0-0.DC(I). NO.35218-A DT.13-11-91

• AS PER PQ

• AS PER QMI

JEWELL TO DRG. NO. MCT-794.

JEWELL TO DRG. NO. MCT-794.

MCT-794.

• As per Sl No. 48 of Annexure-A of OFB Letter No. OFB/108/Online VR/QC dated 12/02/2019

• As per Sl No. 48 of Annexure-A of OFB Letter No. OFB/108/Online VR/QC dated 12/02/2019

SPRING LEAF AS PER DRG.NO.CQA (I)-393/21, CAT./PT.NO.5340-014215 OF GRIP ASSY FOR DEVICE FIRING IB

SPRING LEAF AS PER DRG.NO.CQA (I)-393/21, CAT./PT.NO.5340-014215 OF GRIP ASSY FOR DEVICE FIRING IB

DRG.NO.CQA (I)-393/21, CAT./PT.NO.5340-014215

• Forming

• Chemical & Mechanical properties as per std.given drawing
• Dimensional Inspection, for all dimensions given in the drawing & other Parameter which are mentioned in relevant drawing.

SPRING SPECIAL PURPOSE AS PER DR.NO.CQA (I)-393/5, CAT/PT.NO.5360-006713 FOR DEVICE FIRING IB

SPRING SPECIAL PURPOSE AS PER DR.NO.CQA (I)-393/5, CAT/PT.NO.5360-006713 FOR DEVICE FIRING IB

DR.NO.CQA (I)-393/5, CAT/PT.NO.5360-006713

• Spring Manufacturing Machine

• -Chemical & Mechanical properties as per std.given drawing
• Dimensional Inspection, for all dimensions given in the drawing & other Parameter which are mentioned in relevant drawing.

NUT CASTELLATED HEXAGON AS PER DRG.NO.CQA (I)-393/3,CAT./PT.NO.5310-021796 FOR DEVICE FIRING IB FOR MINE

NUT CASTELLATED HEXAGON AS PER DRG.NO.CQA (I)-393/3,CAT./PT.NO.5310-021796 FOR DEVICE FIRING IB FOR MINE

DRG.NO.CQA (I)-393/3,CAT./PT.NO.5310-021796

• Machining

• 1. Chemical & Mechanical properties as per std. given drawing. 2. Dimensional inspection, for all dimensions given in the drawing & other parameter which are mentioned in relevant drawing.

Testing Device Circuit Continuity 1B as per Drawing No CQA I 408 CAT/PT No 1345-000429 Item Code-7012907618)

Testing Device Circuit Continuity 1B as per Drawing No CQA I 408 CAT/PT No 1345-000429 Item Code-7012907618)

1345-000429

• Electrical Testing Equipment( Molding Machingh Electrical tech & Assy.,

• Chemical & Mechanical properties as per std.given drawing
• Dimensional Inspection, for all dimensions given in the drawing & other Parameter which are mentioned in relevant drawing.

STEEL STRIP TO SPECN : BS:1449:PT:1:1983 HR 15 STEEL SIZE 3.25MM X 70MM X 1250MM FOR BAR TO DRG.NO IUX-615 FOR CI (A) KIRKEE, (IFD)

STEEL STRIP TO SPECN : BS:1449:PT:1:1983 HR 15 STEEL SIZE 3.25MM X 70MM X 1250MM FOR BAR TO DRG.NO IUX-615 FOR CI (A) KIRKEE, (IFD)

• Melting & Rolling

• Chemical & Mechanical properties as per std.given drawing
• Dimensional Inspection, for all dimensions given in the drawing & other Parameter which are mentioned in relevant drawing.

BUTTON SPECIAL AS PER DRG.NO.CQA (I)-393/18, CAT/PT.NO.5340-014217 OF GRIP LEFT ASSY FOR DEVICE FIRING IB

BUTTON SPECIAL AS PER DRG.NO.CQA (I)-393/18, CAT/PT.NO.5340-014217 OF GRIP LEFT ASSY FOR DEVICE FIRING IB

DRG.NO.CQA (I)-393/18, CAT/PT.NO.5340-014217

• Machining

• Chemical & Mechanical properties as per std.given drawing
• Dimensional Inspection, for all dimensions given in the drawing & other Parameter which are mentioned in relevant drawing.

SPRING LOCK AS PER DRG.NO.CQA (I)-393/23,CAT/PT.NO.-5340-014213 for devicd firing IB ()

SPRING LOCK AS PER DRG.NO.CQA (I)-393/23,CAT/PT.NO.-5340-014213 for devicd firing IB ()

DRG.NO.CQA (I)-393/23,CAT/PT.NO.-5340-014213

• Forming & Machining

• Chemical & Mechanical properties as per std.given drawing
• Dimensional Inspection, for all dimensions given in the drawing & other Parameter which are mentioned in relevant drawing.

Fabric cotton grey mercerized, 95- 117 gsm.

ADRDE/QMS/TGTE/F/2019/04 dated :-17/05/2019 Except that: (i) “The roll length is specified as minimum 100 mtr.” (ii) Fabric width 94 cm.

ADRDE/QMS/TGTE/F/2019/04 dated :-17/05/2019 Except that: (i) “The roll length is specified as minimum 100 mtr.” (ii) Fabric width 94 cm.

• As per Specification/Drawing

• As per Specification/Drawing

RING RETAINING AS PER DRG.NO.CQA(I) 393/32, CAT./PT.NO.5365-009879 FOR ARMATURE OF DEVICE FIRING

RING RETAINING AS PER DRG.NO.CQA(I) 393/32, CAT./PT.NO.5365-009879 FOR ARMATURE OF DEVICE FIRING

DRG.NO.CQA(I) 393/32, CAT./PT.NO.5365-009879

• Press Cutting & Plating

• 1. Chemical & Mechanical properties as per std. given drawing. 2. Dimensional inspection, for all dimensions given in the drawing & other parameter which are mentioned in relevant drawing.

STEEL ROUND DIA 28MM SPEC. BS 970 PT-1: 1983-GR-070 M 20

STEEL ROUND DIA 28MM SPEC. BS 970 PT-1: 1983-GR-070 M 20

• Melting & Rolling

• 1. Chemical & Mechanical properties as per std. given drawing. 2. Dimensional inspection, for all dimensions given in the drawing & other parameter which are mentioned in relevant drawing.

SPRING SPECIAL PURPOSE AS PER DR.NO.CQA (I)-393/5, CAT/PT.NO.5360-006713 FOR DEVICE FIRING IB

SPRING SPECIAL PURPOSE AS PER DR.NO.CQA (I)-393/5, CAT/PT.NO.5360-006713 FOR DEVICE FIRING IB

DR.NO.CQA (I)-393/5, CAT/PT.NO.5360-006713

• Spring Manufacturing Machine

• -Chemical & Mechanical properties as per std.given drawing
• Dimensional Inspection, for all dimensions given in the drawing & other Parameter which are mentioned in relevant drawing.

SCREW SPECIAL AS PER DRG.NO.CQA (I)-393/6,CAT/PT.NO.5305 -016657 FOR DEVIE FIRING IB

SCREW SPECIAL AS PER DRG.NO.CQA (I)-393/6,CAT/PT.NO.5305 -016657 FOR DEVIE FIRING IB

DRG.NO.CQA (I)-393/6,CAT/PT.NO.5305 -016657

• Machining

• Chemical & Mechanical properties as per Std. Given drawing
• Dimensional Inspection, for all dimensions given in drawing & other parameter which are mentioned in relevant drawing

SCREW SPECIAL AS PER DRG.NO.CQA(I)-393/7, CAT/PT NO.5305-016656 FOR DEVICE FIRING IB

SCREW SPECIAL AS PER DRG.NO.CQA(I)-393/7, CAT/PT NO.5305-016656 FOR DEVICE FIRING IB

DRG.NO.CQA(I)-393/7, CAT/PT NO.5305-016656

• Machining

• Chemical & Mechanical properties as per std.given drawing
• Dimensional Inspection, for all dimensions given in the drawing & other Parameter which are mentioned in relevant drawing.

WINDING ARMATURE AS PER DRG.NO.CQA (I)-393/SA-4, CAT/PT.NO.2920-002194 FOR DEVICE FIRING IB

WINDING ARMATURE AS PER DRG.NO.CQA (I)-393/SA-4, CAT/PT.NO.2920-002194 FOR DEVICE FIRING IB

DRG.NO.CQA (I)-393/SA-4, CAT/PT.NO.2920-002194

• Winding

• Chemical & Mechanical properties as per std.given drawing
• Dimensional Inspection, for all dimensions given in the drawing & other Parameter which are mentioned in relevant drawing.

SPRING LEAF AS PER DRG.NO.CQA (I)-393/21, CAT./PT.NO.5340-014215 OF GRIP ASSY FOR DEVICE FIRING IB

SPRING LEAF AS PER DRG.NO.CQA (I)-393/21, CAT./PT.NO.5340-014215 OF GRIP ASSY FOR DEVICE FIRING IB

DRG.NO.CQA (I)-393/21, CAT./PT.NO.5340-014215

• Forming

• Chemical & Mechanical properties as per std.given drawing
• Dimensional Inspection, for all dimensions given in the drawing & other Parameter which are mentioned in relevant drawing.

PIN STRAIGHT HEADED DRG.NO. CQA(I) 393/14 CAT/PT. NO.-5315-008699

PIN STRAIGHT HEADED DRG.NO. CQA(I) 393/14 CAT/PT. NO.-5315-008699

DRG.NO. CQA(I) 393/14 CAT/PT. NO.-5315-008699

• Machining

• 1-Chemical & Mechanical properties as per std. Given drawing. 2- Dimensional Inspection ,for all dimensions given In drawing & other parameter which are mentioned In relevant drawing

PRISM TO DRG NO MCT 2550 3

PRISM TO DRG NO MCT 2550 3

• PRECISION OPTICAL POLISHING

• PRECISION OPTICAL POLISHING ASSOCIATED INSPECTION

TIMBER OF ANY SPICES 20X170X1000MM

TIMBER OF ANY SPICES 20X170X1000MM

• AS PER FILE ATTACHED

• AS PER FILE ATTACHED

CONVERSION OF BODY BLANK WITHOUT HEAT TREATMENT PHOSPATING REQUIRED FOR THE PRODUCTION OF 0POINT315 SPR TO DRG NO TEND 2644 FROM FORGING DRG NO RFI SK 7470SK 7470

CONVERSION OF BODY BLANK WITHOUT HEAT TREATMENT PHOSPATING REQUIRED FOR THE PRODUCTION OF 0POINT315 SPR TO DRG NO TEND 2644 FROM FORGING DRG NO RFI SK 7470SK 7470

TEND 2644 AND FORGING DRAWING RFI SK 7470

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

UPPER HAND GUARD ASSY WITH PICATINY RAIL AS PER DRG NO K 2080STAR6 WITH FIRMS MATERIAL

UPPER HAND GUARD ASSY WITH PICATINY RAIL AS PER DRG NO K 2080STAR6 WITH FIRMS MATERIAL

K 2080STAR6

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

DIA 6MM SS WIRE ROD IS6528-1972 GR 04 CR 18 NI 10 FULLY SOFTENED

DIA 6MM SS WIRE ROD IS6528-1972 GR 04 CR 18 NI 10 FULLY SOFTENED

• Melting & Rolling

• Chemical & Mechanical properties as per std. given drawing
• Dimensional Inspection, for all dimensions given in drawing & other parameter which are mentioned in relevant drawing

SQUARE DRAWN ROD OF 1/4" (6.35MM) BRASS, BS, 2874:1969 CZ 122 H

SQUARE DRAWN ROD OF 1/4" (6.35MM) BRASS, BS, 2874:1969 CZ 122 H

01

• Melting & Rolling

• Chemical & Mechanical properties as per std. given drawing.
• Dimensional Inspection, for all dimensions given in drawing & other parameter which are mentioned in relevant drawing

SCREW SPECIAL AS PER DRG.NO.CQA (I)-393/6,CAT/PT.NO.5305 -016657 FOR DEVIE FIRING IB

SCREW SPECIAL AS PER DRG.NO.CQA (I)-393/6,CAT/PT.NO.5305 -016657 FOR DEVIE FIRING IB

DRG.NO.CQA (I)-393/6,CAT/PT.NO.5305 -016657

• Machining

• Chemical & Mechanical properties as per Std. Given drawing
• Dimensional Inspection, for all dimensions given in drawing & other parameter which are mentioned in relevant drawing

SS WIRE ROD DIA 10MM SPEC. IS 6527-1978 GR 04 CR 18 NI 10

SS WIRE ROD DIA 10MM SPEC. IS 6527-1978 GR 04 CR 18 NI 10

• Melting & rolling

• 1-Chemical & Mechanical properties as per std. Given drawing. 2- Dimensional Inspection ,for all dimensions given In drawing & other parameter which are mentioned In relevant drawing.

PIN STRAIGHT HEADED AS PER DRG.NO. CQA (I)-393/19,CAT/PT.NO .5315-008702 OF GRIP LEFT ASSY FOR DEVICE FIRING IB FOR MINE

PIN STRAIGHT HEADED AS PER DRG.NO. CQA (I)-393/19,CAT/PT.NO .5315-008702 OF GRIP LEFT ASSY FOR DEVICE FIRING IB FOR MINE

DRG.NO. CQA (I)-393/19,CAT/PT.NO .5315-008702

• Machining

• 1-Chemical & Mechanical properties as per std. Given drawing. 2- Dimensional Inspection ,for all dimensions given In drawing & other parameter which are mentioned In relevant drawing.

Fabrication of Shirt Mans Angola Drab PolyWool Modified Pattern 2012 Specification :- IND/TC/4552 (m) & Approved Sample

Fabrication of Shirt Mans Angola Drab PolyWool Modified Pattern 2012 Specification :- IND/TC/4552 (m) & Approved Sample

• as per attached list (Manufacturing Technology Files )

• as per attached list (Testing / Inspection Facility Files )

ELECTROMAGNET YEK -80.

ELECTROMAGNET YEK -80. DRG.NO.YEK.80.000.GCH-1 FOR T-90,CODE-94

DRG.NO.YEK.80.000.GCH-1

• AS PER DRAWING SPECIFICATION

• AS PER DRAWING SPECIFICATION

PROOF MACHINED CASTING FOR HOUSING TO DRG.NO.188-94-001-10

DRG.NO.188-94-001-10

DRG.NO.188-94-001-10

• as per drawing specification

• as per drawing specification

PRIMER ELECTRIC NO.N30MK1(EMPTY)TOERDLDRG971,DETNO.1ARD NO-2374 DT.31.01.08SPECIFICATION:ERDL/PYRO/PS-152(a) CONSISTING OF(01)BODY TO DRGNO.NAD 1589/1/1 ARD-2371 DT.24.07.07(QTY 01 NO.), (02) CONTACT BOLT:ERDLDRG 971 DETNO.3ARD-2403 DT.19.04.10(QTY-01 NO.),(03)PRIMER MAGAZINE CUP:ERDLDRG. 971 DETNO.7DT.10.10.88(QTY 01 NO.), 4.CUPCLOSING:ERDLDRG 971 DETNO.8DT.10.10.88 (QTY01 NO.)ITEM NO.1(BODY)& ITEM-02(CONTACT BOLT) ARE TO BE MOULDEDWITH GLASS FILLED PHENOLIC RESIN TO JSS-9330-05-2016-REV2

PRIMER ELECTRIC NO.N30MK1(EMPTY)TOERDLDRG971,DETNO.1ARD NO-2374 DT.31.01.08SPECIFICATION:ERDL/PYRO/PS-152(a) CONSISTING OF(01)BODY TO DRGNO.NAD 1589/1/1 ARD-2371 DT.24.07.07(QTY 01 NO.), (02) CONTACT BOLT:ERDLDRG 971 DETNO.3ARD-2403 DT.19.04.10(QTY-01 NO.),(03)PRIMER MAGAZINE CUP:ERDLDRG. 971 DETNO.7DT.10.10.88(QTY 01 NO.), 4.CUPCLOSING:ERDLDRG 971 DETNO.8DT.10.10.88 (QTY01 NO.)ITEM NO.1(BODY)& ITEM-02(CONTACT BOLT) ARE TO BE MOULDEDWITH GLASS FILLED PHENOLIC RESIN TO JSS-9330-05-2016-REV2

NO.N30MK1(EMPTY)TOERDLDRG971,DETNO.1ARD NO-2374 DT.31.01.08SPECIFICATION:ERDL/PYRO/PS-152(a) CONSISTING OF(01)BODY TO DRGNO.NAD 1589/1/1 ARD-2371 DT.24.07.07(QTY 01 NO.), (02) CONTACT BOLT:ERDLDRG 971 DETNO.3ARD-2403 DT.19.04.10(QTY-01 NO.),(03)PRIME

• as per the paper attached

• as per the paper attached

6221020012 CAP TO DRG. NO.ARM 1172 A26DT.24-11-79 6221020012

CAP TO DRG. NO.ARM 1172 A26DT.24-11-79 6221020012

• Press machine Shellac lacquering facility

• Inspection type Vernier caliper Macrometer Radius gauge

GUARD HAND UPPER ASSY. TO DS CAT NO.1005-560701,DC (I) NO. 26580-SA, DATED 08.03.11 FOR LMG 5.56MM IN FINISHED CONDIT ION.

GUARD HAND UPPER ASSY. TO DS CAT NO.1005-560701,DC (I) NO. 26580-SA, DATED 08.03.11 FOR LMG 5.56MM IN FINISHED CONDIT ION.

DS CAT NO.1005-560701

• as per attached document

• as attached document

TUBE EXPLODER REAR TO DRG.NO. ARM- 1172 B-23.

TUBE EXPLODER REAR TO DRG.NO. ARM- 1172 B-23.

DRG.NO. ARM- 1172 B-23.

• SPIRAL WINDING MACHINE WITH SUITABLE MANDREL & GLUE BATH TUBE CUTTING MACHINE PRESS MACHINE VARNISHING FACILITY

• VERNIER CALLIPER HEIGHT GAUGE SUITABLE GAUGE FOR CHECKING TAPER/ CHAMBER TEST REQUIREMENT AS PER SPECIFICATION NO.ARM 107 FOR TUBE, EXPLODERS,AIR CRAFT BOMB

TUBE EXPLODER NOSE TO DRG.NO. ARM- 1172 B-22 Dt.24-11-79.

TUBE EXPLODER NOSE TO DRG.NO. ARM- 1172 B-22 Dt.24-11-79.

DRG.NO. ARM- 1172 B-22 Dt.24-11-7

• SPIRAL WINDING MACHINE WITH SUITABLE MANDREL & GLUE BATH TUBE CUTTING MACHINE PRESS MACHINE VARNISHING FACILITY

• VERNIER CALLIPER HEIGHT GAUGE SUITABLE GAUGE FOR CHECKING TAPER/ CHAMBER TEST REQUIREMENT AS PER SPECIFICATION NO.ARM 107 FOR TUBE, EXPLODERS,AIR CRAFT BOMB

RAW MATERIAL OF BARREL ST. ROD 40.0 MM DIA TO SPEC. JSS:9510-06-2012 CODE REF .B. T - I COND. WITH COMPOSITION N RESTRICTION S%=0.01 MAX., P%=0.015MAX & (S+P)%=0.022MAX. ANNEXURE NO. 7158/DDO/LMG 5.56MM BARREL FOR TESTING PARA ENCLOSED., QUALITY AOD/VOD.

SPEC. JSS:9510 -06-2012 CODE REF .B. T - I COND.

• Melting & Rolling

• as per attached document

STEEL FORGED TRIGGER TO DRG NO.SK-5294*D.A. 11/2020.

STEEL FORGED TRIGGER TO DRG NO.SK-5294*D.A. 11/2020.

• Machining & Assy.

• As per attached manufacturing testing document

SHAFT TO DRG NO. 166.29.305CB

SHAFT TO DRG NO. 166.29.305CB

166.29.305CB

• ATTACHED

• ATTACHED

LEVER CHANGE THROUGH MIM ROUTE TO DS.CAT.NO. 1005-007811 DC(I) NO.26921-SA, DT-26.08.2016

LEVER CHANGE THROUGH MIM ROUTE TO DS.CAT.NO. 1005-007811 DC(I) NO.26921-SA, DT-26.08.2016

• As per drawing

• As per drawing

6510120004 CAP KG-4 FOR A30-T DETONATOR TO DRG FOR PRIMER DETONATOR A-30-T,NO.CQA(A)/AMN/2857, DC NO 37271-A DT 08.11.10

CAP KG-4 FOR A30-T DETONATOR TO DRG FOR PRIMER DETONATOR A-30-T,NO.CQA(A)/AMN/2857, DC NO 37271-A DT 08.11.10

• suitable press machine suitable chemical passivation followed by shellac application facility or MOU/Tie up with other firm doing the sasme

• radius gauge vernier caliper thickness gauge

CUP YA-5 FOR A30-T (DET) TO DRG.NO. FOR PRIMER A-30-T CQA(A)/AMN/2856DCNO.37271-A,DT.08.11.10 SCANNED ON DT.05.01.2011.

CUP YA-5 FOR A30-T (DET) TO DRG.NO. FOR PRIMER A-30-T CQA(A)/AMN/2856DCNO.37271-A,DT.08.11.10 SCANNED ON DT.05.01.2011.

FOR PRIMER A-30-T CQA(A)/AMN/2856DCNO.37271-A,DT.08.11.10 SCANNED ON DT.05.01.2011.

• suitable press machine

• radius gauge verier calliper thickness gauge

WASHER RETAINER TO CQA(A) DRG. NO. 11618-0-0 (AS PER DC NO. 36804-A DATED 01/01/2002

WASHER RETAINER TO CQA(A) DRG. NO. 11618-0-0 (AS PER DC NO. 36804-A DATED 01/01/2002

• as per attachment

• as per attachment

CUSHION DETONATOR TO CQA(A) DRG. NO. 13152-0-0 (AS PER DC NO. 37554-A DATED 25-07-2020

CUSHION DETONATOR TO CQA(A) DRG. NO. 13152-0-0 (AS PER DC NO. 37554-A DATED 25-07-2020

• as per attachment

• as per attachment

LOCK, CENTRIFUGAL PLUNGER PIN TO CQA(A) DRG. NO. 13134-0-0 (AS PER DC NO. 36804-A DATED 01/01/2002

LOCK, CENTRIFUGAL PLUNGER PIN TO CQA(A) DRG. NO. 13134-0-0 (AS PER DC NO. 36804-A DATED 01/01/2002

• as per attachment

• as per attachment

ELECTRONIC POWER PLANT BATTERY CHARGER TO DRG.NO.1149052D TO DOC.NO:GCF/50/40782.

ELECTRONIC POWER PLANT BATTERY CHARGER TO DRG.NO.1149052D TO DOC.NO:GCF/50/40782.

• As per tender document Annexure L

• As per tender document Annexure L

INNER TUBE PNEUMATIC TYRE 8.25X19 WITH VALVE DETAIL TR-14 STRAIGHT TYPE CORE TR CI

AS PER REQUIRED/ SPECIFICATION

• inner tube kneumatic

• inner tube kneumatic

SQUIB EMPTY: ERDL DRG.971,DET NO.05 DT:101088

SQUIB EMPTY: ERDL DRG.971,DET NO.05 DT:101088

ERDL DRG.971,DET NO.05 DT:101088

• PRESS MACHINE, SURFACE TREATMENT FACILITY(TIN PLATING) OR MOU/TIE-UP WITH SPECIFIED AGENCY FOR SAME, SOLDERING FACILITY, DRYING FACILITY FOR DRYING AT 90-95 DEG. CENT.

• VERNIER CALLIPER, OHM METER

Elastic Black 3cm Wide Best trade quality as per provisional specification no.-S/2594/CCD army logo/TC-15(a)

Best trade quality as per provisional specification no.-S/2594/CCD army logo/TC-15(a)

• as per attached list (Manufacturing Technology Files )

• as per attached list (Testing / Inspection Facility Files )

BEVEL GEAR DRIVING AND BEVEL GEAR DRIVEN MATCHED SET TO DRG NO. CQA(HV)0000.000.001

BEVEL GEAR DRIVING AND BEVEL GEAR DRIVEN MATCHED SET TO DRG NO. CQA(HV)0000.000.001

CQA(HV)0000.000.001

• VQC ATTACHED

• VQC ATTACHED

VALVE THREE WAY TO DRG NO IAN 301SA

VALVE THREE WAY TO DRG NO IAN 301SA

• VALVE THREE WAY TO DRG NO IAN 301SA

• VALVE THREE WAY TO DRG NO IAN 301SA

BEARING SLEEVE DRG NO 3120 004647

BEARING SLEEVE DRG NO 3120 004647

• BEARING SLEEVE DRG NO 3120 004647

• BEARING SLEEVE DRG NO 3120 004647

ROLLED HOMOGENOUS ARMOUR PLATE (RHA) OF SIZE 1830 X 1830 X 230 MM AS PER DEF STAN 95 13 ISSUE 4

ROLLED HOMOGENOUS ARMOUR PLATE (RHA) OF SIZE 1830 X 1830 X 230 MM AS PER DEF STAN 95 13 ISSUE 4

ROLLED HOMOGENOUS ARMOUR PLATE (RHA) OF SIZE 1830 X 1830 X 230 MM AS PER DEF STAN 95 13 ISSUE 4

• 1. FURNANCE 2. CONTINUOUS CASTING/INGOT CASTING 3. FORGING & SLABBING MILL 4. DESCALER 5. ROUGHING/FINISHING MILL 6. HOT & COLD LEVELLING 7. SHEARING MACHING 8. SHOT BLASTING MACHINE 9. CONDITIONING CHAMBER

• 1. ULTRASONIC TESTING 2. MECHANICAL, CHEMICAL & MICROSTRUCTURAL TESTING AT NABL LABORATORY. 3. GENERAL PURPOSE ENGINEERING EQUIPMENTS FOR MEASURING DIMENSIONS LIKE VERNIER CALLIPER/MICROMETER/DIAL INDICATOR ETC. 4. PHOSPATING TEST 5. INCASE OF SOLE SELLING AGENT/DEALERS/STOCKIEST FIRM NEED NOT SUBMIT MANUFACTURING TECHNOLOGY/INSPECTION TECHNOLOGY BUT SHOULD HAVE OEM CERTIFICATE FOR THIS ITEM.

SHAPED CHARGE 90 MM (E.ASSY) CONSISTING OF 2 COMPONENTS TODRG. NO. HE/CAST 018 DET 2 & DET 4 & QAP NO. HEMRL/HE/ADD/08/01 REV.00 OF 09/2008

SHAPED CHARGE 90 MM (E.ASSY) CONSISTING OF 2 COMPONENTS TODRG. NO. HE/CAST 018 DET 2 & DET 4 & QAP NO. HEMRL/HE/ADD/08/01 REV.00 OF 09/2008

SHAPED CHARGE 90 MM (E.ASSY) CONSISTING OF 2 COMPONENTS TODRG. NO. HE/CAST 018 DET 2 & DET 4 & QAP NO. HEMRL/HE/ADD/08/01 REV.00 OF 09/2008

• 1. INJECTION MOULDING 2. GRINDING.

• 1. THREAD GAUGE. 2. GENERAL PURPOSE ENGINEERING EQUIPMENT'S TO MEASURE DIMENSIONS LIKE MICROMETRE, VERNIER CALIPER, HEIGHT GAUGE.