LF-7440208473 OBJECTIVE As Per Drg. AL5.920.307

LF-7440208473 OBJECTIVE As Per Drg. AL5.920.307

LF-7440208473 OBJECTIVE As Per Drg. AL5.920.307

• Manufacturing Technology

• Testing / Inspection Facility

LF-7440208461 PRISM BLOCK As Per Drg. AL5.935.565

LF-7440208461 PRISM BLOCK As Per Drg. AL5.935.565

LF-7440208461 PRISM BLOCK As Per Drg. AL5.935.565

• Manufacturing Technology

• Testing / Inspection Facility

LF-7440208471 PRISM As Per Drg. AL5.935.567

LF-7440208471 PRISM As Per Drg. AL5.935.567

LF-7440208471 PRISM As Per Drg. AL5.935.567

• Manufacturing Technology

• Testing / Inspection Facility

FILLING PLUG (MACHINED)

FILLING PLUG (MACHINED). AS PER DRAWING ARM 1172B5 (R.NO. 4, DATED 25/04/89)

ARM 1172B5 (R.NO. 4, DATED 25/04/89)

• 1.Forging Hammer (min 1 ton) of adequate capacity, 2.Centre Lathe/CNC Lathe ,3.Drilling Machine

• 1.Chemical testing facility. ,2.Mechanical testing facility (UTS,YS, elongation, hardness).

AS/ GCF/SIZE/SPECIFICATION

AS/ GCF/SIZE/SPECIFICATION

• AS PER TECHNICAL SPECIFICATION

• AS P[ER QAP

GREEN COLOUR/WHITE COLOUR AS PER DRG NO. OFBA/NCP/EXPN/16 DT. 07.6.67

GREEN COLOUR/WHITE COLOUR AS PER DRG NO. OFBA/NCP/EXPN/16 DT. 07.6.67

DRG NO. OFBA/NCP/EXPN/16 DT. 07.6.67

• MSME

• MSME

SUB ASSEMBLY OF BRAKE PARACHUTE AS PER OPF DRAWING NO. 1-14R45/ADOB-00

SUB ASSEMBLY OF BRAKE PARACHUTE AS PER OPF DRAWING NO. 1-14R45/ADOB-00

1-14R45/ADOB-00

• AS PER DRAWING / SPECIFICATION

• AS PER DRAWING / SPECIFICATION

FABRICATION OF BREECH FRAME AS PER DRAWING NO. IAN-357 DC NO. 15695-W DT 2.11. 81 (SHEET NO 1 & 2) (INPUT MATERIAL ITEM CODE : 7060503741)

FABRICATION OF BREECH FRAME AS PER DRAWING NO. IAN-357 DC NO. 15695-W DT 2.11. 81 (SHEET NO 1 & 2) (INPUT MATERIAL ITEM CODE : 7060503741)

• AS PER ATTACHMENT

• AS PER ATTACHMENT

STEEL FORGING TO GSF SK. NO.-2332 B FOR BREECH RING TO DRG. NO. 1002378

STEEL FORGING TO GSF SK. NO.-2332 B FOR BREECH RING TO DRG. NO. 1002378

• AS PER ATTACHMENT

• AS PER ATTACHMENT

DRUM RH AND LH TO DRG NO 175 40 017 A AND 018 A F

GOST 4543 71

175 40 017 A AND 018 A F

• As per VQC

• As per QAP

BLANK SIZE FOR RING RACE LOWER TO DRG NO 434 12 007 F

TY 14 1 2982 80

434 12 007 F

• As per VQC

• As per QAP

BLANK SIZE FOR RING RACE UPPER TO DRG NO 172 12 031 F

TY 14 1 2982 80

172 12 031 F

• As per VQC

• As per QAP

Screw Barrel Mount for 9X19 mm Machine Pistol as per drawing no. 2101 01 02 01 05 004 00DA

Screw Barrel Mount for 9X19 mm Machine Pistol as per drawing no. 2101 01 02 01 05 004 00DA

2101 01 02 01 05 004 00DA

• As per drawing

• As per drawing

Barrel Adapter Left for 9X19 mm Machine Pistol as per drawing no. 2101 01 02 01 05 003 00DA

Barrel Adapter Left for 9X19 mm Machine Pistol as per drawing no. 2101 01 02 01 05 003 00DA

2101 01 02 01 05 003 00DA

• As per drawing

• As per drawing

Barrel Adapter Right for 9X19 mm Machine Pistol as per drawing no. 2101 01 02 01 05 002 00DA

Barrel Adapter Right for 9X19 mm Machine Pistol as per drawing no. 2101 01 02 01 05 002 00DA

2101 01 02 01 05 002 00DA

• As per drawing

• As per drawing

Ejector 9 mm for 9X19 mm Machine Pistol as per drawing no. 2101 01 02 01 05 007 00DA

Ejector 9 mm for 9X19 mm Machine Pistol as per drawing no. 2101 01 02 01 05 007 00DA

2101 01 02 01 05 007 00DA

• As per drawing

• As per drawing

DRAG TYPE EDDY CURRENT TACHOMETER TE 4B SPECIFICATIONS TO SPEC. TY:25-02-1500-TE-4B

TY:25-02-1500-TE-4B

TY:25-02-1500-TE-4B

• ATTACHED

• ATTACHED

Fore Sight for 9X19 mm Machine Pistol as per drawing no. 2101 01 02 01 05 010 00DA

Fore Sight for 9X19 mm Machine Pistol as per drawing no. 2101 01 02 01 05 010 00DA

2101 01 02 01 05 010 00DA

• As per drawing

• As per drawing

MAIN SPRING , 432.23.058-1

AS PER DRAWING

432.23.058-1

• AS PER VQC ATTACHED
• -
• -
• --
• -

• AS PER VQC ATTACHED
• -
• -
• -
• -

CYLINDER GAS AS PER DRG.NO.1804 01 01 01 00 001 00DA REQUIRED FOR LMG 7.62MM X 51MM BELT FED

CYLINDER GAS AS PER DRG.NO.1804 01 01 01 00 001 00DA REQUIRED FOR LMG 7.62MM X 51MM BELT FED

1804 01 01 01 00 001 00DA

• Forging, Machining

• 1) Chemical & Mechanical properties as per std. given drawing. 2) Dimensional inspection, for all dimensions given in the drawing & other parameter which are mentioned in relevant drawings.

EPICYCLIC GEAR OF 4TH PLANETARY SET 172.40.311

EPICYCLIC GEAR OF 4TH PLANETARY SET 172.40.311

172.40.311

• AS PER VQC

• AS PER VQC

NYLON 6, 6 FABRIC WITH BREATHABLE MEMBRANE FOR RAIN CAPE, 120+-10 GSM, NAVY BLUE COLOR, WITH 150(+ 2 -0) CMS

AS PER REQUIREMENT & SPECIFICATION

• AS PER REQUIREMENT & SPECIFICATION

• AS PER REQUIREMENT & SPECIFICATION

(1) LID TO DRG NO ARDE 2024/26 AMDT.NO.AL NO.671 DT 29-5-91 (2) BOOSTER TUBE TO DRG.NO.ARDE/2024/21 AMDT.NO.AL NO.616 DT 4-10-88 (3) CASE AND RING ASSY TO DRG.NO.ARDE 2024/18 AMDT. [NOTE NO. 1 ADDED DATED 25-8-86.

AS PER DRAWING

• AS PER DRAWING

• AS PER SPECIFICATION

Bearing Housing Blank DRG. No- 3052979(New Drg. No. GCF/50/39476)

As per Annexure A

DRG. No- 3052979(New Drg. No. GCF/50/39476)

• A. Essential Manufacturing Facility: - Name of Machine & instruments(Capacity/Size) 1.EPS Moulding machine with PLC control (Bed Size- 1200X1000 MM & 1400X 1200 MM) 2.Pre Expander machine(100 kg/hour) 3.CNC glue machine (Bed Size-1110x830 MM) 4.CNC Foam Cutting machine(2000 x 1500 MM)
• 5.Vacuum Pump(700 MM Hg Minimum) 6.Sand Cooling System(10 Ton /Hr. Minimum) 7.Sand Show ring System(10 Ton /Hr. Minimum) 8.Knockout System(1 Ton/Hr. Minimum) 9.Boiler(2 Ton Minimum) 10.Coating Mixing Tank(2 Ton Minimum)
• 11.Slurry Mixer 12.Letter Printing Machine 13.Heat Treatment Furnace electrically PLC based with quenching arrangement & Graph Print out 14.Hot Room For Mold drying 15.Induction Furnace(1 Ton Minimum)
• B. Manufacturing Process: Casting should be made through vacuum Lost Foam castings Process.

• C. Testing Facilities: Firm must have all desirable testing Facilities for testing of castings as per OFM specification/Annexure.

Cradle DRG. No.- 188.94.082

Cradle DRG. No.- 188.94.082, As per annexure E

DRG. No.- 188.94.082

• A. Essential Manufacturing Facility: - Name of Machine & instruments(Capacity/Size) 1.EPS Moulding machine with PLC control (Bed Size- 1200X1000 MM & 1400X 1200 MM) 2.Pre Expander machine(100 kg/hour) 3.CNC glue machine (Bed Size-1110x830 MM) 4.CNC Foam Cutting machine(2000 x 1500 MM)
• 5.Vacuum Pump(700 MM Hg Minimum) 6.Sand Cooling System(10 Ton /Hr. Minimum) 7.Sand Show ring System(10 Ton /Hr. Minimum) 8.Knockout System(1 Ton/Hr. Minimum) 9.Boiler(2 Ton Minimum) 10.Coating Mixing Tank(2 Ton Minimum)
• 11.Slurry Mixer 12.Letter Printing Machine 13.Heat Treatment Furnace electrically PLC based with quenching arrangement & Graph Print out 14.Hot Room For Mold drying 15.Induction Furnace(1 Ton Minimum)
• B. Manufacturing Process: Casting should be made through vacuum Lost Foam castings Process.

• C. Testing Facilities: Firm must have all desirable testing Facilities for testing of castings as per OFM specification/Annexure.

Bracket DRG.No.- 2025651 (New Drg. no.- GCF/50/39467)

Bracket DRG.No.- 2025651 (New Drg. no.- GCF/50/39467) As per annexure D

DRG.No.- 2025651 (New Drg. no.- GCF/50/39467)

• A. Essential Manufacturing Facility: - Name of Machine & instruments(Capacity/Size) 1.EPS Moulding machine with PLC control (Bed Size- 1200X1000 MM & 1400X 1200 MM) 2.Pre Expander machine(100 kg/hour) 3.CNC glue machine (Bed Size-1110x830 MM) 4.CNC Foam Cutting machine(2000 x 1500 MM)
• 5.Vacuum Pump(700 MM Hg Minimum) 6.Sand Cooling System(10 Ton /Hr. Minimum) 7.Sand Show ring System(10 Ton /Hr. Minimum) 8.Knockout System(1 Ton/Hr. Minimum) 9.Boiler(2 Ton Minimum) 10.Coating Mixing Tank(2 Ton Minimum)
• 11.Slurry Mixer 12.Letter Printing Machine 13.Heat Treatment Furnace electrically PLC based with quenching arrangement & Graph Print out 14.Hot Room For Mold drying 15.Induction Furnace(1 Ton Minimum)
• B. Manufacturing Process: Casting should be made through vacuum Lost Foam castings Process.

• C. Testing Facilities: Firm must have all desirable testing Facilities for testing of castings as per OFM specification/Annexure.

Bracket DRG. No. 2025460 (New DRG.no- GCF/50/39490

Bracket DRG. No. 2025460 (New DRG.no- GCF/50/39490 As per Annexure C

DRG.no- GCF/50/39490

• A. Essential Manufacturing Facility: - Name of Machine & instruments(Capacity/Size) 1.EPS Moulding machine with PLC control (Bed Size- 1200X1000 MM & 1400X 1200 MM) 2.Pre Expander machine(100 kg/hour) 3.CNC glue machine (Bed Size-1110x830 MM) 4.CNC Foam Cutting machine(2000 x 1500 MM)
• Vacuum Pump(700 MM Hg Minimum) 6.Sand Cooling System(10 Ton /Hr. Minimum) 7.Sand Show ring System(10 Ton /Hr. Minimum) 8.Knockout System(1 Ton/Hr. Minimum) 9.Boiler(2 Ton Minimum) 10.Coating Mixing Tank(2 Ton Minimum)
• Slurry Mixer 12.Letter Printing Machine 13.Heat Treatment Furnace electrically PLC based with quenching arrangement & Graph Print out 14.Hot Room For Mold drying 15.Induction Furnace(1 Ton Minimum)
• B. Manufacturing Process: Casting should be made through vacuum Lost Foam castings Process.

• C. Testing Facilities: Firm must have all desirable testing Facilities for testing of castings as per OFM specification/Annexure.

Bearing Housing Blank DRG.No- 30522978(New DRG. NoGCF/50/39491 As per Annexure B

Bearing Housing Blank DRG.No- 30522978(New DRG. NoGCF/50/39491 As per Annexure B

DRG. NoGCF/50/39491

• 1.EPS Moulding machine with PLC control (Bed Size- 1200X1000 MM & 1400X 1200 MM) 2.Pre Expander machine(100 kg/hour) 3.CNC glue machine (Bed Size-1110x830 MM) 4.CNC Foam Cutting machine(2000 x 1500 MM)
• Vacuum Pump(700 MM Hg Minimum) 6.Sand Cooling System(10 Ton /Hr. Minimum) 7.Sand Show ring System(10 Ton /Hr. Minimum) 8.Knockout System(1 Ton/Hr. Minimum) 9.Boiler(2 Ton Minimum) 10.Coating Mixing Tank(2 Ton Minimum)
• Slurry Mixer 12.Letter Printing Machine 13.Heat Treatment Furnace electrically PLC based with quenching arrangement & Graph Print out 14.Hot Room For Mold drying 15.Induction Furnace(1 Ton Minimum)
• Manufacturing Process: Casting should be made through vacuum Lost Foam castings Process

• Testing Facilities: Firm must have all desirable testing Facilities for testing of castings as per OFM specification/Annexure

Packing Box for Revolver 0.32 Side Swing DRG No.SK-6263 R/SW.

Packing Box for Revolver 0.32 Side Swing DRG No.SK-6263 R/SW.

DRG No.SK-6263 R/SW.

• AS PER DRAWING

• AS PER DRAWING

Sub-Assembly of Wind Cheater {(Fabrication With All Input Material (Fabric and Garniture Material) except Plastic Slide Fasteners} Specification No.- As per relevant clause of provisional specification No. S/3558/A/TC-15/Coat ECC with amendment No. 1 to 6 & Annexure-‘A’ for Sub Assembly of Wind Cheater except PSF”

Sub-Assembly of Wind Cheater {(Fabrication With All Input Material (Fabric and Garniture Material) except Plastic Slide Fasteners} Specification No.- As per relevant clause of provisional specification No. S/3558/A/TC-15/Coat ECC with amendment No. 1 to 6 & Annexure-‘A’ for Sub Assembly of Wind Cheater except PSF”

• AS PER ATTACHED FILE
• AS PER ATTACHED Manufacturing Technology FILE

• AS PER ATTACHED Testing / Inspection Facility FILE

Housing Fore Sight for 9X19 mm Machine Pistol as per drawing no. 2101 01 02 01 05 009 00DA

Housing Fore Sight for 9X19 mm Machine Pistol as per drawing no. 2101 01 02 01 05 009 00DA

2101 01 02 01 05 009 00DA

• As per drawing

• As per drawing

Rear sight for 9X19 mm Machine Pistol as per drawing no. 2101 01 02 01 05 012 00DA

Rear sight for 9X19 mm Machine Pistol as per drawing no. 2101 01 02 01 05 012 00DA

2101 01 02 01 05 012 00DA

• As per drawing

• As per drawing

GRAPHITE DRY SULPHUR FREE TO SPECN. NO. JSS-9620-01-2021 (REV.NO.4), SIZE - 63 MICROMETER.

GRAPHITE DRY SULPHUR FREE TO SPECN. NO. JSS-9620-01-2021 (REV.NO.4), SIZE - 63 MICROMETER.

• MSME

• GRAPHITE DRY SULPHUR FREE TO SPECN. NO. JSS-9620-01-2021 (REV.NO.4), SIZE - 63 MICROMETER.

BLEACHED COTTON LINTER (BCL)

BLEACHED COTTON LINTER (BCL) NC Note No. 014402/OFN/Prod/Genl Dated 15.05.2023 ATTACHED ANNEXURE A

• MSME

• AS PER ANNEXURE

Mfg Supply of Ramp Back Sight ICR 1253 to DS Cat No 1005 001606 DC No 27045 SA Dt 24 03 17 fully finished with firms material required for 7 62mm

Mfg Supply of Ramp Back Sight ICR 1253 to DS Cat No 1005 001606 DC No 27045 SA Dt 24 03 17 fully finished with firms material required for 7 62mm

ICR 1253

• Mfg Supply of Ramp Back Sight ICR 1253 to DS Cat No 1005 001606 DC No 27045 SA Dt 24 03 17 fully finished with firms material required for 7 62mm

• Mfg Supply of Ramp Back Sight ICR 1253 to DS Cat No 1005 001606 DC No 27045 SA Dt 24 03 17 fully finished with firms material required for 7 62mm

ADDITIVE LINER(76.2) TO DRG. NO ARDE-1716 DET NO. 7 (PROVISIONAL) R. NO. 8 DATED 10/01/2012 ARD-2423..

ADDITIVE LINER(76.2) TO DRG. NO ARDE-1716 DET NO. 7 (PROVISIONAL) R. NO. 8 DATED 10/01/2012 ARD-2423..

• attached

• attached

LINK MK-I TO DESICNER'S REF.D.5.(E)10050/161 ISSUE 6A DATED 30-10-64 FOR 30MM ADEN AMMUNATION. NOTE:-QUALITY DOCUMENTS TO BE SUPPLIED BY FIRM AS PER ENCL

LINK MK-I TO DESICNER'S REF.D.5.(E)10050/161 ISSUE 6A DATED 30-10-64 FOR 30MM ADEN AMMUNATION. NOTE:-QUALITY DOCUMENTS TO BE SUPPLIED BY FIRM AS PER ENCL

LINK MK-I TO DESICNER'S REF.D.5.(E)10050/161 ISSUE 6A DATED 30-10-64 FOR 30MM ADEN AMMUNATION. NOTE:-QUALITY DOCUMENTS TO BE SUPPLIED BY FIRM AS PER ENCL

• attached

• attached

GEAR CROWN 3RD PLANETARY GEAR SET 172.40.247

GEAR CROWN 3RD PLANETARY GEAR SET 172.40.247

172.40.247

• AS PER VQC

• AS PER VQC

CROWN GEAR OF 3RD PLANETARY GEAR SET 172.40.310

CROWN GEAR OF 3RD PLANETARY GEAR SET 172.40.310

• AS PER VQC

• AS PER VQC

BOOSTER 172.40.324

BOOSTER 172.40.324

172.40.324

• AS PER VQC

• AS PER VQC

INNER BOOSTER 172.40.323

INNER BOOSTER 172.40.323

172.40.323

• AS PER VQC

• AS PER VQC

BOOSTER 172.40.322

BOOSTER 172.40.322

172.40.322

• AS PER VQC

• AS PER VQC

BOOSTER 172.40.270-1

BOOSTER 172.40.270-1

172.40.270-1

• AS PER VQC

• AS PER VQC

CROWN 172.40.320

CROWN 172.40.320

172.40.320

• AS PER VQC

• AS PER VQC

FAN HUB 175.41.050

FAN HUB 175.41.050

175.41.050

• AS PER VQC

• AS PER VQC

FAN HUB

FAN HUB

188.41.006

• AS PER VQC ATTACHED

• AS PER VQC ATTACHED

TRIGGER MECHANISM ASSEMBLY AS PER DRG.NO. 1804 01 01 02 00 000 00DA REQUIRED FOR LMG 7.62MM X 51MM BELT FED

TRIGGER MECHANISM ASSEMBLY AS PER DRG.NO. 1804 01 01 02 00 000 00DA REQUIRED FOR LMG 7.62MM X 51MM BELT FED

1804 01 01 02 00 000 00DA

• Machining, Spring, Coiling machine and assy.

• 1) Chemical & Mechanical properties as per std. given drawing. 2) Dimensional inspection, for all dimensions given in the drawing & other parameter which are mentioned in relevant drawings.

RECEIVER AS PER DRG.NO.1804 01 01 01 01 000 00DA FOR LMG 7.62 X 51MM BELT FED

RECEIVER AS PER DRG.NO.1804 01 01 01 01 000 00DA FOR LMG 7.62 X 51MM BELT FED

1804 01 01 01 01 000 00DA

• Machining & Tig Laser welding

• 1) Chemical & Mechanical properties as per std. given drawing. 2) Dimensional inspection, for all dimensions given in the drawing & other parameter which are mentioned in relevant drawings.

GAS BLOCK & FORE SIGHT ASSEMBLY AS PER DRG.NO.1804 01 01 04 16 000 00DA REQUIRED FOR LMG 7.62MM X 51MM BELT FED

GAS BLOCK & FORE SIGHT ASSEMBLY AS PER DRG.NO.1804 01 01 04 16 000 00DA REQUIRED FOR LMG 7.62MM X 51MM BELT FED

1804 01 01 04 16 000 00DA

• Machining, Spring, Coiling machine and assy.

• 1) Chemical & Mechanical properties as per std. given drawing. 2) Dimensional inspection, for all dimensions given in the drawing & other parameter which are mentioned in relevant drawings.

ZINC STEARATE AS PER SPECIFICATION NO. JSS-6810-133-2021 (REV. NO. 3).

ZINC STEARATE AS PER SPECIFICATION NO. JSS-6810-133-2021 (REV. NO. 3).

• MSME

• ZINC STEARATE AS PER SPECIFICATION NO. JSS-6810-133-2021 (REV. NO. 3).

Cocking Handle Assembly for 9X19 mm Machine Pistol as per drawing no. 2101 01 02 05 12 000 00DB

Cocking Handle Assembly for 9X19 mm Machine Pistol as per drawing no. 2101 01 02 05 12 000 00DB

2101 01 02 05 12 000 00DB

• As per drawing

• As per drawing

Bolt Assembly for 9X19 mm Machine Pistol as per drawing no. 2101 01 02 01 06 000 00DA

Bolt Assembly for 9X19 mm Machine Pistol as per drawing no. 2101 01 02 01 06 000 00DA

2101 01 02 01 06 000 00DA

• As per drawing
• As per drawing

• As per drawing

Locking Rear Block for 9X19 mm Machine Pistol as per drawing no. 2101 01 02 00 00 002 00DA

Locking Rear Block for 9X19 mm Machine Pistol as per drawing no. 2101 01 02 00 00 002 00DA

2101 01 02 00 00 002 00DA

• As per drawing

• As per drawing

FLANGE TO DRG NO: 172.28.004-1/C

GOST 977 - 88

172.28.004-1/C

• AS PER VQC

• AS PER QAP

7015010022 SCREW BM10 6GX22 46 016 GOST 17475 80

SCREW BM10 6GX22 46 016 GOST 17475 80

• ENCLOSED

• ENCLOSED

Wheel Rear Sight for 9X19 mm Machine Pistol as per drawing no. 2101 01 02 01 05 016 00DA

Wheel Rear Sight for 9X19 mm Machine Pistol as per drawing no. 2101 01 02 01 05 016 00DA

2101 01 02 01 05 016 00DA

• As per drawing

• As per drawing

7008216030 BOLT M16 6GX30 88 38XC 01 GOST 7808 70

BOLT M16 6GX30 88 38XC 01 GOST 7808 70

• ENCLOSED

• ENCLOSED

SEMI-MACHINED "BLANKS FOR ILLUMINATING TIME FUZE BODY TO OFAJ DRG NO CG 27 H & PERIPHERAL GRAIN GROWTH 1MM (MAX) ON RADIUS"

SEMI-MACHINED "BLANKS FOR ILLUMINATING TIME FUZE BODY TO OFAJ DRG NO CG 27 H & PERIPHERAL GRAIN GROWTH 1MM (MAX) ON RADIUS"

• AS PER ATTACHMENT

• AS PER ATTACHMENT

FORGING BLANKS FOR TIME TRAIN RING TO OFAJ DRG NO. DC-154 D PGG 1.8MM (MAX) ON RADIUS

FORGING BLANKS FOR TIME TRAIN RING TO OFAJ DRG NO. DC-154 D PGG 1.8MM (MAX) ON RADIUS

• AS PER ATTACHMENT

• AS PER ATTACHMENT

Bolt Assembly for 9X19 mm Machine Pistol as per drawing no. 2101 01 02 01 06 000 00DA

Bolt Assembly for 9X19 mm Machine Pistol as per drawing no. 2101 01 02 01 06 000 00DA

2101 01 02 01 06 000 00DA

• As per drawing
• As per drawing

• As per drawing

Plate Rear & Butt Assembly for 9X19 mm Machine Pistol as per drawing no. 2101 01 02 00 02 000 00DA

Plate Rear & Butt Assembly for 9X19 mm Machine Pistol as per drawing no. 2101 01 02 00 02 000 00DA

2101 01 02 00 02 000 00DA

• As per drawing
• As per drawing

• As per drawing
• As per drawing

WINCH 500KG TO DRG NO. 527.08.70.0613

WINCH 500KG TO DRG NO. 527.08.70.0613

527.08.70.0613

• ATTACHED

• ATTACHED

PRE MACHINED BLANK FS FOR GAS PORT BLOCK WITH FIRMS MATERIAL TO DRG NO TEND 2611 STAR4 FOR TAR

PRE MACHINED BLANK FS FOR GAS PORT BLOCK WITH FIRMS MATERIAL TO DRG NO TEND 2611 STAR4 FOR TAR

TEND 2611 STAR 4

• MACHINED COMPONENT TO BLANKSTAGE

• AS PER DRAWING

PACKING PIECE MILL BOARD (108 MM X 108 MM X 3 MM THICK) AS PER JSS 9310-01-2014 (REVISION NO-3) AND CQA(A) KIRKEE DRAWING NO.13603-0-0.

PACKING PIECE MILL BOARD (108 MM X 108 MM X 3 MM THICK) AS PER JSS 9310-01-2014 (REVISION NO-3) AND CQA(A) KIRKEE DRAWING NO.13603-0-0.

CQA(A) KIRKEE DRAWING NO.13603-0-0.

• MSME

• PACKING PIECE MILL BOARD (108 MM X 108 MM X 3 MM THICK) AS PER JSS 9310-01-2014 (REVISION NO-3) AND CQA(A) KIRKEE DRAWING NO.13603-0-0.

DISC FELT WOOL 5 MM AS PER CIA DRG.NO 12911-0-0 DC(I)34186 A, DT-3.8.87.WITH MATERIAL SPECIFICATION AS PER CL.NO.3.2 OF IS 1719 : 2000.REAFFIRMED IN 2019.(FORTH REVISION)

DISC FELT WOOL 5 MM AS PER CIA DRG.NO 12911-0-0 DC(I)34186 A, DT-3.8.87.WITH MATERIAL SPECIFICATION AS PER CL.NO.3.2 OF IS 1719 : 2000.REAFFIRMED IN 2019.(FORTH REVISION)

• MSME

• DISC FELT WOOL 5 MM AS PER CIA DRG.NO 12911-0-0 DC(I)34186 A, DT-3.8.87.WITH MATERIAL SPECIFICATION AS PER CL.NO.3.2 OF IS 1719 : 2000.REAFFIRMED IN 2019.(FORTH REVISION)

SHIELD FRONT FOR 40MM MGL WITHOUT HEAT TREATMENT AS PER DRG NO TEND 2724

AS PER OFT REQUIREMENTS

• AS PER OFT REQUIREMENTS

• AS PER OFT REQUIREMENTS

CORDAGE BRAIDED NYLON 23 KG UD

Cordage Braided Nylon 23 Kg Undyed CORD NYLON BRAIDED FOR PARACHUTE 225 N WHITE SPCN. No. IS :4227-1998 VARIETY NO. 1 EXCEPT THAT:- NOMINAL LINEAR DENSITY CORE –- OF YARN (DTEX), SHEATH Alternate ends of 235X1 a tolerance of and 235x2 dtex (-)5% and (+) 10% BREAKING LOAD ON 15CM 226 N, MIN TEST LENGTH, N TPM (final) 100, min

• As per Specification/Drawing

• As per Specification/Drawing

RIBBON NYLON 50 MM UNDYED

ADRDE/SPECN/1983/12(b)

• As per Specification/Drawing

• As per Specification/Drawing

RIBBON NYLON 16 MM UNDYED

ADRDE/SPECN/1983/12(b)

• As per Specification/Drawing

• As per Specification/Drawing

LOWER HAND GUARD ASSY. FOR CQB 5.56X45MM DRG. NO. 1901 01 07 00 00 000 00DD

LOWER HAND GUARD ASSY. FOR CQB 5.56X45MM DRG. NO. 1901 01 07 00 00 000 00DD

DRG No 1901 01 07 00 00 000 00DD

• Moulding Process

• Chemical & Mechanical properties as per std.given drawing
• Dimensional Inspection, for all dimensions given in the drawing & other Parameter which are mentioned in relevant drawing.

OLED DISPLAY MODEL-EMA 100311-01 SVGA + REV 3 MONOCHROME GREEN OLED-XL MICRO DISPLAY WITH 0.5 MM GLASS COVER (LF-7441121483)

OLED DISPLAY MODEL-EMA 100311-01 SVGA + REV 3 MONOCHROME GREEN OLED-XL MICRO DISPLAY WITH 0.5 MM GLASS COVER (LF-7441121483)

• Manufacturing Technology

• Testing / Inspection Facility

ETHYL CELLULOSE HIGH VISCOSITY TYPE N-200 CONFORMING TO SPCN CS-2724.THE MATERIAL WILL BE ACCEPTED AFTER TRIAL EXTRUSION OF SMOOTH AND TRANSPARENT E.C.SLEEVES WITHOUT ANY WRINKLES AND UNMOLTEN PARTICLES AND FREE FROM FOREIGN MATTER AND MEETING MECHANICAL PROPERTIES.

ETHYL CELLULOSE HIGH VISCOSITY TYPE N-200 CONFORMING TO SPCN CS-2724.THE MATERIAL WILL BE ACCEPTED AFTER TRIAL EXTRUSION OF SMOOTH AND TRANSPARENT E.C.SLEEVES WITHOUT ANY WRINKLES AND UNMOLTEN PARTICLES AND FREE FROM FOREIGN MATTER AND MEETING MECHANICAL PROPERTIES.

• MSME

• MSME

Poly Plastic Tape White 12 mm

Poly Plastic Tape White 12 mm printed with OPF Kanpur in green- colour for semi automatic – strapping device is as per Specification – 1- Colour of tape - White 2- Colour of letter – Green 3- Breaking strength – 70 to 85 kgs. 4- Sealing Temperature – 165 degree centigrade 5- Size 12 mm width X 0.50 mm thick approx. 6-Sporn (paper cone) size O/D 227 MM X I/D 203 MM 7- Length of roll (standard) 1800 mtrs 8- Printing of word OPF KANPUR on the tape white at a gap of 6” word size 8 mm.

• As per Specification/drawing

• As per Specification/drawing

CONVERSION OF 85 MM DIA ROD AL GR 6082 IN TO DISTANCE TUBE BLANK OF 84 MM MK III TO DRG NO CC 496 E

CONVERSION OF 85 MM DIA ROD AL GR 6082 IN TO DISTANCE TUBE BLANK OF 84 MM MK III TO DRG NO CC 496 E

• CONVERSION OF 85 MM DIA ROD AL GR 6082 IN TO DISTANCE TUBE BLANK OF 84 MM MK III TO DRG NO CC 496 E

• CONVERSION OF 85 MM DIA ROD AL GR 6082 IN TO DISTANCE TUBE BLANK OF 84 MM MK III TO DRG NO CC 496 E

BIPOD ASSEMBLY AS PER DRG.NO. 1804 01 08 00 00 000 00DA REQUIRED FOR LMG 7.62MM X 51MM BELT FED

BIPOD ASSEMBLY AS PER DRG.NO. 1804 01 08 00 00 000 00DA REQUIRED FOR LMG 7.62MM X 51MM BELT FED

1804 01 08 00 00 000 00DA

• Machining, Spring Coiling Machine, Welding and Assy.

• 1) Chemical & Mechanical properties as per std. given drawing. 2) Dimensional inspection, for all dimensions given in the drawing & other parameter which are mentioned in relevant drawings.

FEED MECHANISM & COVER ASSEMBLY AS PER DRG.NO.1804 01 04 00 00 000 00DA REQUIRED FOR LMG 7.62MM X 51MM BELT FED

FEED MECHANISM & COVER ASSEMBLY AS PER DRG.NO.1804 01 04 00 00 000 00DA REQUIRED FOR LMG 7.62MM X 51MM BELT FED

1804 01 04 00 00 000 00DA

• Machining, Spring Coiling Machine and riveting

• 1) Chemical & Mechanical properties as per std. given drawing. 2) Dimensional inspection, for all dimensions given in the drawing & other parameter which are mentioned in relevant drawings.

BUTT ASSEMBLY AS PER DRG. NO. 1804 01 07 00 00 000 00DA REQUIRED FOR LMG 7.62MM X 51MM BELT FED

BUTT ASSEMBLY AS PER DRG. NO. 1804 01 07 00 00 000 00DA REQUIRED FOR LMG 7.62MM X 51MM BELT FED

• Moulding, Forging, Machining, Spring Coiling machine & assy.

• 1) Chemical & Mechanical properties as per std. given drawing. 2) Dimensional inspection, for all dimensions given in the drawing & other parameter which are mentioned in relevant drawings.

RING TO DRG NO 172 40 146 F

GOST 4543 71

172 40 146 F

• As per VQC

• As per QAP

UNIFIED PRESSURE WARNING DEVICE TO DRG NO.CDY1A-012CB

UNIFIED PRESSURE WARNING DEVICE TO DRG NO.CDY1A-012CB

CDY1A-012CB

• ATTACHED

• ATTACHED

Screw Rear Sight for 9X19 mm Machine Pistol as per drawing no. 2101 01 02 01 05 015 00DA

Screw Rear Sight for 9X19 mm Machine Pistol as per drawing no. 2101 01 02 01 05 015 00DA

Drawing no. 2101 01 02 01 05 015 00DA

• As per drawing
• As per drawing

• As per drawing
• As per drawing