MIL Vendor Panel

Warning!

You need to have JavaScript enabled to use this site.

Facility to apply for multiple items against multiple advertisement introduced. For details Click here || For any system/application related issues, please send the details of the issue to mail id: ofb.support@in.experis.com with a copy to the OFB mail id : ofbqcvrcell.ofb@ofb.gov.in

Items open for Registration

Search

Reset

Advertisement No.

Factory

Location

Items

1441

128MMETT20001880

Ordnance Factory Tiruchirapalli

The General Manager,
Tiruchirapalli
Tiruchirapalli
Tamil Nadu
620016

Name	Code	Quantity	Approx Value	Select
OIL BOTTLE AS PER DRG NO K 9028 REQUIRED FOR TRICHY ASSAULT RIFLE Description OIL BOTTLE AS PER DRG NO K 9028 REQUIRED FOR TRICHY ASSAULT RIFLE Specification OIL BOTTLE AS PER DRG NO K 9028 REQUIRED FOR TRICHY ASSAULT RIFLE OIL_BOTTLE_K_9028.pdf Drawing no. K 9028 OIL_BOTTLE_K_9028.pdf Manufacturing Technology BLOW MOULDING AND INJECTION MOULDING BLOW MOULDING AND INJECTION MOULDING BLOW MOULDING AND INJECTION MOULDING BLOW MOULDING AND INJECTION MOULDING BLOW MOULDING AND INJECTION MOULDING OIL_BOTTLE_K_9028.pdf Testing / Inspection Facility AS PER DRAWING SPEC AS PER DRAWING SPEC AS PER DRAWING SPEC AS PER DRAWING SPEC AS PER DRAWING SPEC	70	6419 Number

1442

TE NO 190401P2FO

Gun Carriage Factory

The General Manager,
Jabalpur
Jabalpur
Jabalpur,Madhya Pradesh
482011

Name	Code	Quantity	Approx Value	Select
9080079069 HOSE TO DS CAT NO 4720 003007 PT NO IFL 7239 Physical Verification needed Description HOSE TO DS CAT NO 4720 003007 PT NO IFL 7239 Specification HOSE TO DS CAT NO 4720 003007 PT NO IFL 7239 Drawing no. HOSE TO DS CAT NO 4720 003007 PT NO IFL 7239 DRG.pdf Manufacturing Technology HOSE TO DS CAT NO 4720 003007 PT NO IFL 7239 4720-003007_(QAP).pdf Testing / Inspection Facility QAP ATTACHED	90	156 Number

1443

OLF/MM-2/T-1906010031

Opto Electronic Factory

Dehradun
Dehradun
Dehradun
Dehradun, Uttaranchal
248008

Name	Code	Quantity
LF 7449017055 LRF CABLE ASSY AS PER DRG Physical Verification needed Description LRF CABLE ASSY AS PER DRG NO.ODC-OLF/CTI/T-90/055 NOTE:ITEMS AT SL NO. 1 & 2 OF DRG. NO.ODC-OLF/CTI/T-90/055 TO BE SUPPLIED BY OLF AND TO BE FITTED BY MANUFACTURER/ VENDOR BEFORE DELIVERY (LF 7449017055) Specification LRF CABLE ASSY AS PER DRG NO.ODC-OLF/CTI/T-90/055 NOTE:ITEMS AT SL NO. 1 & 2 OF DRG. NO.ODC-OLF/CTI/T-90/055 TO BE SUPPLIED BY OLF AND TO BE FITTED BY MANUFACTURER/ VENDOR BEFORE DELIVERY (LF 7449017055) Drawing no. LRF CABLE ASSY AS PER DRG NO.ODC-OLF/CTI/T-90/055 NOTE:ITEMS AT SL NO. 1 & 2 OF DRG. NO.ODC-OLF/CTI/T-90/055 TO BE SUPPLIED BY OLF AND TO BE FITTED BY MANUFACTURER/ VENDOR BEFORE DELIVERY (LF 7449017055) Manufacturing Technology ELECTRONICS ITEM manufacturing_technology_files.docx Testing / Inspection Facility ELECTRONICS ITEM	74	100 Number
LF 7449017054 VIDEO CABLE 2 AS PER DRAWING Physical Verification needed Description VIDEO CABLE-2 AS PER DRAWING NO.ODC-OLF/CTI/T-90/73 NOTE:ITEMS AT SL NO.1,3 & 4 OF DRG.NO.ODC-OLF/CTI/T-90/73 TO BE SUPPLIED BY OLF AND TO BE FITTED BY MANUFACTURER/VENDOR BEFORE DELIVERY (LF 7449017054) Specification VIDEO CABLE-2 AS PER DRAWING NO.ODC-OLF/CTI/T-90/73 NOTE:ITEMS AT SL NO.1,3 & 4 OF DRG.NO.ODC-OLF/CTI/T-90/73 TO BE SUPPLIED BY OLF AND TO BE FITTED BY MANUFACTURER/VENDOR BEFORE DELIVERY (LF 7449017054) Drawing no. VIDEO CABLE-2 AS PER DRAWING NO.ODC-OLF/CTI/T-90/73 NOTE:ITEMS AT SL NO.1,3 & 4 OF DRG.NO.ODC-OLF/CTI/T-90/73 TO BE SUPPLIED BY OLF AND TO BE FITTED BY MANUFACTURER/VENDOR BEFORE DELIVERY (LF 7449017054) Manufacturing Technology ELECTRONICS ITEM manufacturing_technology_files.docx Testing / Inspection Facility ELECTRONICS ITEM	74	100 Number
LF 7449017053 VIDEO CABLE 1 AS PER DRG Physical Verification needed Description VIDEO CABLE-1 AS PER DRG NO.ODC-OLF/CTI/T-90/72. NOTE:ITEMS AT SL NO. 1 TO 4 OF DRG.NO.ODC-OLF/CTI/T-90/72 TO BE SUPPLIED BY OLF AND TO BE FITTED BY MANUFACTURER /VENDOR BEFORE SUPPLY (LF 7449017053) Specification VIDEO CABLE-1 AS PER DRG NO.ODC-OLF/CTI/T-90/72. NOTE:ITEMS AT SL NO. 1 TO 4 OF DRG.NO.ODC-OLF/CTI/T-90/72 TO BE SUPPLIED BY OLF AND TO BE FITTED BY MANUFACTURER /VENDOR BEFORE SUPPLY (LF 7449017053) Drawing no. VIDEO CABLE-1 AS PER DRG NO.ODC-OLF/CTI/T-90/72. NOTE:ITEMS AT SL NO. 1 TO 4 OF DRG.NO.ODC-OLF/CTI/T-90/72 TO BE SUPPLIED BY OLF AND TO BE FITTED BY MANUFACTURER /VENDOR BEFORE SUPPLY (LF 7449017053) Manufacturing Technology ELECTRONICS ITEM manufacturing_technology_files.docx Testing / Inspection Facility ELECTRONICS ITEM	74	100 Number
LF 7449017052 HARNESS 4 AS PER DRAWING Physical Verification needed Description HARNESS-4 AS PER DRAWING NO.ODC-OLF/CTI/T-90/054 NOTE:ITEMS AT SL NO.1&2 OF PART LIST NO.ODC-OLF/CTI/T-90/054TO BE SUPPLIED BY OLF & TO BE FITTED BY MANUFACTURER/VENDOR BEFORE DELIVERY (LF 7449017052) Specification HARNESS-4 AS PER DRAWING NO.ODC-OLF/CTI/T-90/054 NOTE:ITEMS AT SL NO.1&2 OF PART LIST NO.ODC-OLF/CTI/T-90/054TO BE SUPPLIED BY OLF & TO BE FITTED BY MANUFACTURER/VENDOR BEFORE DELIVERY (LF 7449017052) Drawing no. HARNESS-4 AS PER DRAWING NO.ODC-OLF/CTI/T-90/054 NOTE:ITEMS AT SL NO.1&2 OF PART LIST NO.ODC-OLF/CTI/T-90/054TO BE SUPPLIED BY OLF & TO BE FITTED BY MANUFACTURER/VENDOR BEFORE DELIVERY (LF 7449017052) Manufacturing Technology ELECTRONICS ITEM manufacturing_technology_files.docx Testing / Inspection Facility ELECTRONICS ITEM	74	100 Number
LF 7449017051 HARNESS 3 AS PER DRAWING Physical Verification needed Description HARNESS-3 AS PER DRAWING NO.ODC-OLF/CTI/T-90/053 WITHOUT ITEMS AT SL NO.2 & 3 OF PART LIST NO.ODC-OLF/CTI/T-90/053. NOTE:ITEM AT SL NO.1 OF PART LIST NO.ODC-OLF/CTI/T-90/053 TO BE SUPPLIED BY OLF AND TO BE FITTED BY MANUFACTURER/VENDOR BEFORE DELIVERY (LF 7449017051) Specification HARNESS-3 AS PER DRAWING NO.ODC-OLF/CTI/T-90/053 WITHOUT ITEMS AT SL NO.2 & 3 OF PART LIST NO.ODC-OLF/CTI/T-90/053. NOTE:ITEM AT SL NO.1 OF PART LIST NO.ODC-OLF/CTI/T-90/053 TO BE SUPPLIED BY OLF AND TO BE FITTED BY MANUFACTURER/VENDOR BEFORE DELIVERY (LF 7449017051) Drawing no. HARNESS-3 AS PER DRAWING NO.ODC-OLF/CTI/T-90/053 WITHOUT ITEMS AT SL NO.2 & 3 OF PART LIST NO.ODC-OLF/CTI/T-90/053. NOTE:ITEM AT SL NO.1 OF PART LIST NO.ODC-OLF/CTI/T-90/053 TO BE SUPPLIED BY OLF AND TO BE FITTED BY MANUFACTURER/VENDOR BEFORE DELIVER Manufacturing Technology ELECTRONICS ITEM manufacturing_technology_files.docx Testing / Inspection Facility ELECTRONICS ITEM	74	100 Number
LF 7449017050 HARNESS 2 AS PER DRAWING Physical Verification needed Description HARNESS-2 AS PER DRAWING NO.ODC-OLF/CTI/T-90/052(M1) WITHOUTITEMS AT SL NO.2 TO 6 IN PART LIST NO.ODC-OLF/CTI/T-90/052(M1) NOTE:ITEMS AT SL NO.1 & 7 OF PART LIST NO.ODC-OLF/CTI/T-90/052(M1) TO BE SUPPLIED BY OLF & TO BE FITTED BY MANUFACTURER/VENDOR BEFORE DELIVERY (LF 7449017050) Specification HARNESS-2 AS PER DRAWING NO.ODC-OLF/CTI/T-90/052(M1) WITHOUTITEMS AT SL NO.2 TO 6 IN PART LIST NO.ODC-OLF/CTI/T-90/052(M1) NOTE:ITEMS AT SL NO.1 & 7 OF PART LIST NO.ODC-OLF/CTI/T-90/052(M1) TO BE SUPPLIED BY OLF & TO BE FITTED BY MANUFACTURER/VENDOR BEFORE DELIVERY (LF 7449017050) Drawing no. HARNESS-2 AS PER DRAWING NO.ODC-OLF/CTI/T-90/052(M1) WITHOUTITEMS AT SL NO.2 TO 6 IN PART LIST NO.ODC-OLF/CTI/T-90/052(M1) NOTE:ITEMS AT SL NO.1 & 7 OF PART LIST NO.ODC-OLF/CTI/T-90/052(M1) TO BE SUPPLIED BY OLF & TO BE FITTED BY MANUFACTURER/VENDOR Manufacturing Technology ELECTRONICS ITEM manufacturing_technology_files.docx Testing / Inspection Facility ELECTRONICS ITEM	74	100 Number
LF 7449017049 HARNESS 1 AS PER DRAWING Physical Verification needed Description HARNESS-1 AS PER DRAWING NO. ODC-OLF/CTI/T-90/051(M1) WITHOUT ITEM AT SL NO.1 OF PART LIST NO.ODC-OLF/CTI/T-90/051(M1). NOTE:ITEM AT SL NO. 2 TO 10 & 12 TO 17 OF PART LIST NO. ODC-OLF/CTI/T-90/051(M1) TO BE SUPPLIED BY OLF & TO BE FITTED BY MANUFACTURER/VENDOR BEFORE DELIVERY (LF 7449017049) Specification HARNESS-1 AS PER DRAWING NO. ODC-OLF/CTI/T-90/051(M1) WITHOUT ITEM AT SL NO.1 OF PART LIST NO.ODC-OLF/CTI/T-90/051(M1). NOTE:ITEM AT SL NO. 2 TO 10 & 12 TO 17 OF PART LIST NO. ODC-OLF/CTI/T-90/051(M1) TO BE SUPPLIED BY OLF & TO BE FITTED BY MANUFACTURER/VENDOR BEFORE DELIVERY (LF 7449017049) Drawing no. HARNESS-1 AS PER DRAWING NO. ODC-OLF/CTI/T-90/051(M1) WITHOUT ITEM AT SL NO.1 OF PART LIST NO.ODC-OLF/CTI/T-90/051(M1). NOTE:ITEM AT SL NO. 2 TO 10 & 12 TO 17 OF PART LIST NO. ODC-OLF/CTI/T-90/051(M1) TO BE SUPPLIED BY OLF & TO BE FITTED BY MANUFACTU Manufacturing Technology ELECTRONICS ITEM manufacturing_technology_files.docx Testing / Inspection Facility ELECTRONICS ITEM	74	100 Number

1444

MNF/BAFFLE/OFAJ

Ordnance Factory Ambajhari

The Sr.General Manager,
Ambajhari
Ambajhari
Maharashtra
440021

Name	Code	Quantity	Approx Value	Select
GASKET TO OFAJ DRG NO FS 2886B Description GASKET TO OFAJ DRG NO FS 2886B Specification GASKET TO OFAJ DRG NO FS 2886B Drawing no. FS-2886_B_(1-1)_(Gasket).pdf Manufacturing Technology AS PER DRG FS-2886_B_(1-1)_(Gasket).pdf Testing / Inspection Facility AS PER QMI	00	2271 Number

1445

HVF/TE0102190209/2019-20/TA/CBOI/SD-OTE dt 03/02/2020

Heavy Vehicle Factory

The Sr.General Manager,
Avadi
Avadi
Avadi, Tamil Nadu
600054

Name	Code	Quantity
COVER OF FINAL DRIVE LH TO LF 3806404017 Physical Verification needed Description COVER OF FINAL DRIVE LH TO DRG NO: 175.43.001/C Specification 175.43.001/C 175_43_001-C.pdf Drawing no. 175.43.001/C 175_43_001-C.pdf Manufacturing Technology AS PER VQC VQC_1.pdf Testing / Inspection Facility AS PER QAP	38	14 Number
COVER OF FINAL DRIVE RH TO LF 3806404018 Physical Verification needed Description COVER OF FINAL DRIVE RH TO DRG NO: 175.43.002/C Specification 175.43.002/C 175_43_002-C.pdf Drawing no. 175.43.002/C 175_43_002-C.pdf Manufacturing Technology AS PER VQC VQC_1.pdf Testing / Inspection Facility AS PER QAP	38	47 Number
BODY OF LH SUCTION PUMP TO LF 3806407040 Physical Verification needed Description BODY OF LH SUCTION PUMP TO DRG NO: 172.46.066/C Specification GOST 1412-85 GOST_1412-85.pdf Drawing no. 172.46.066/C 172_46_066-C.pdf Manufacturing Technology AS PER VQC VQC_1.pdf Testing / Inspection Facility AS PER QAP	38	86 Number
CASTING CASE TO LF 3806211057 Physical Verification needed Description CASTING CASE TO DRG NO: 172.28.002-1/C Specification GOST 2685-75 GOST_2685-75.pdf Drawing no. 172.28.002-1/C 172_28_002-1-C_compressed.pdf Manufacturing Technology AS PER VQC VQC_1.pdf Testing / Inspection Facility AS PER QAP	38	37 Number
RH DRUM TO DRG NO 172 40 300 F TO LF 3901040034 Physical Verification needed Description RH DRUM TO DRG NO 172 40 300 F Specification GOST 4543 71 GOST_4543-71_Pg_1_to_67.pdf Drawing no. 172 40 300 F 172_40_300-F.pdf Manufacturing Technology AS PER VQC VQC_172_40_300_F.pdf Testing / Inspection Facility AS PER QAP	39	113 Number
7102002000 NUT 520 02 002 Physical Verification needed Description 7102002000 NUT 520 02 002 Specification NUT 520 02 002 Drawing no. NUT 520 02 002 520_02_002.pdf Manufacturing Technology ENCLOSED VQC_IN_BLANK_FORMAT_.pdf Testing / Inspection Facility ENCLOSED	71	4056 Number
7101005005 BOLT 520 01 005 05 Physical Verification needed Description 7101005005 BOLT 520 01 005 05 Specification BOLT 520 01 005 05 Drawing no. BOLT 520 01 005 05 520_01_005-05.pdf Manufacturing Technology ENCLOSED VQC_IN_BLANK_FORMAT_.pdf Testing / Inspection Facility ENCLOSED	71	1125 Number
7101003006 BOLT 520 01 003 06 Physical Verification needed Description 7101003006 BOLT 520 01 003 06 Specification BOLT 520 01 003 06 Drawing no. BOLT 520 01 003 06 520_01_003-06.pdf Manufacturing Technology ENCLOSED VQC_IN_BLANK_FORMAT_.pdf Testing / Inspection Facility ENCLOSED	71	966 Number
7024306050 BOLT 184 04 089CBCB M6 6H 8 40 016 GOST 5927 70 Physical Verification needed Description 7024306050 BOLT 184 04 089CBCB M6 6H 8 40 016 GOST 5927 70 Specification BOLT 184 04 089CBCB M6 6H 8 40 016 GOST 5927 70 Drawing no. BOLT 184 04 089CBCB M6 6H 8 40 016 GOST 5927 70 GOST_5927_70.pdf Manufacturing Technology ENCLOSED VQC_IN_BLANK_FORMAT_.pdf Testing / Inspection Facility ENCLOSED	70	4317 Number
7009216095 BOLT M16X1 5 6GX95 88 38XC 016 GOST 7808 70 Physical Verification needed Description 7009216095 BOLT M16X1 5 6GX95 88 38XC 016 GOST 7808 70 Specification BOLT M16X1 5 6GX95 88 38XC 016 GOST 7808 70 Drawing no. BOLT M16X1 5 6GX95 88 38XC 016 GOST 7808 70 GOST_7808_70.pdf Manufacturing Technology ENCLOSED VQC_IN_BLANK_FORMAT_.pdf Testing / Inspection Facility ENCLOSED	70	117 Number
7009116030 BOLT M16X1 5 6GX30 66 016 GOST 7808 70 Physical Verification needed Description 7009116030 BOLT M16X1 5 6GX30 66 016 GOST 7808 70 Specification BOLT M16X1 5 6GX30 66 016 GOST 7808 70 Drawing no. BOLT M16X1 5 6GX30 66 016 GOST 7808 70 GOST_7808_70.pdf Manufacturing Technology ENCLOSED VQC_IN_BLANK_FORMAT_.pdf Testing / Inspection Facility ENCLOSED	70	748 Number
7008908020 BOLT 3M8X1 6GX20 88 38XC 016 GOST 7808 70 Physical Verification needed Description 7008908020 BOLT 3M8X1 6GX20 88 38XC 016 GOST 7808 70 Specification BOLT 3M8X1 6GX20 88 38XC 016 GOST 7808 70 Drawing no. BOLT 3M8X1 6GX20 88 38XC 016 GOST 7808 70 GOST_7808_70.pdf Manufacturing Technology ENCLOSED VQC_IN_BLANK_FORMAT_.pdf Testing / Inspection Facility ENCLOSED	70	1653 Number
7008812025 BOLT 3M12X25 88 38XC 016 GOST 7808 70 Physical Verification needed Description 7008812025 BOLT 3M12X25 88 38XC 016 GOST 7808 70 Specification BOLT 3M12X25 88 38XC 016 GOST 7808 70 Drawing no. BOLT 3M12X25 88 38XC 016 GOST 7808 70 GOST_7808_70.pdf Manufacturing Technology ENCLOSED VQC_IN_BLANK_FORMAT_.pdf Testing / Inspection Facility ENCLOSED	70	4051 Number
7008808014 BOLT 3M8 6GX14 88 38XC 01 GOST 7808 70 Physical Verification needed Description 7008808014 BOLT 3M8 6GX14 88 38XC 01 GOST 7808 70 Specification BOLT 3M8 6GX14 88 38XC 01 GOST 7808 70 Drawing no. BOLT 3M8 6GX14 88 38XC 01 GOST 7808 70 GOST_7808_70.pdf Manufacturing Technology ENCLOSED VQC_IN_BLANK_FORMAT_.pdf Testing / Inspection Facility ENCLOSED	70	3443 Number
7008808012 BOLT 3M8 6GX12 88 38XC 016 GOST 7808 70 Physical Verification needed Description 7008808012 BOLT 3M8 6GX12 88 38XC 016 GOST 7808 70 Specification BOLT 3M8 6GX12 88 38XC 016 GOST 7808 70 Drawing no. BOLT 3M8 6GX12 88 38XC 016 GOST 7808 70 GOST_7808_70.pdf Manufacturing Technology ENCLOSED VQC_IN_BLANK_FORMAT_.pdf Testing / Inspection Facility ENCLOSED	70	1749 Number
7008212055 BOLT M12 6GX25 88 38XC 016 GOST 7808 70 Physical Verification needed Description 7008212055 BOLT M12 6GX25 88 38XC 016 GOST 7808 70 Specification BOLT M12 6GX25 88 38XC 016 GOST 7808 70 Drawing no. BOLT M12 6GX25 88 38XC 016 GOST 7808 70 GOST_7808_70.pdf Manufacturing Technology ENCLOSED VQC_IN_BLANK_FORMAT_.pdf Testing / Inspection Facility ENCLOSED	70	1564 Number
7008212025 BOLT M12 6GX25 88 38XC 016 GOST 7808 70 Physical Verification needed Description 7008212025 BOLT M12 6GX25 88 38XC 016 GOST 7808 70 Specification BOLT M12 6GX25 88 38XC 016 GOST 7808 70 Drawing no. GOST_7808_70.pdf Manufacturing Technology ENCLOSED VQC_IN_BLANK_FORMAT_.pdf Testing / Inspection Facility ENCLOSED	70	5588 Number
9070056921 ROTATING SOCKET WELDING ASSY TO PART NO AMG 72089 AND DRAWING NO 1015 001560 Physical Verification needed Description ROTATING SOCKET WELDING ASSY. TO PART NO. AMG 72089 & DRAWING NO 1015-001560 Specification ROTATING SOCKET WELDING ASSY. TO PART NO. AMG 72089 & DRAWING NO 1015-001560 230150P2FO_-_PT-A.docx Drawing no. 1015-001560 DRAWINGS.pdf Manufacturing Technology AS PER PART-A AND QAP 1015-001560(qap).pdf Testing / Inspection Facility AS PER PART-A AND QAP	90	257 Number
7007916045 BOLT 3M16 6GX45 66 016 GOST 7808 70 Physical Verification needed Description 7007916045 BOLT 3M16 6GX45 66 016 GOST 7808 70 Specification BOLT 3M16 6GX45 66 016 GOST 7808 70 Drawing no. BOLT 3M16 6GX45 66 016 GOST 7808 70 GOST_7808_70.pdf Manufacturing Technology ENCLOSED VQC_IN_BLANK_FORMAT_.pdf Testing / Inspection Facility ENCLOSED	70	174 Number
7007910025 BOLT 3M10 6GX25 66 016 GOST 7808 70 Physical Verification needed Description 7007910025 BOLT 3M10 6GX25 66 016 GOST 7808 70 Specification BOLT 3M10 6GX25 66 016 GOST 7808 70 Drawing no. BOLT 3M10 6GX25 66 016 GOST 7808 70 GOST_7808_70.pdf Manufacturing Technology ENCLOSED VQC_IN_BLANK_FORMAT_.pdf Testing / Inspection Facility ENCLOSED	70	1113 Number
7006512035 BOLT GOST 7805 M12X35 GOST 7805 70 Physical Verification needed Description BOLT GOST 7805 M12X35 GOST 7805 70 Specification BOLT GOST 7805 M12X35 GOST 7805 70 Drawing no. BOLT GOST 7805 M12X35 GOST 7805 70 GOST_7805_70.pdf Manufacturing Technology ENCLOSED VQC_IN_BLANK_FORMAT_.pdf Testing / Inspection Facility ENCLOSED	70	2127 Number
9070056927 PINION AND GEAR ELEVATING TO DRAWING NO MI IMA 0072 C N Physical Verification needed Description PINION AND GEAR ELEVATING TO DRAWING NO. MI/IMA-0072 C N Specification PINION AND GEAR ELEVATING TO DRAWING NO. MI/IMA-0072 C N 230147P2FO_-_PT-A.docx Drawing no. MI/IMA-0072 C N DRAWINGS.pdf Manufacturing Technology AS PER PART-A AND QAP MI-IMA-0072CN_(QAP).pdf Testing / Inspection Facility AS PER PART-A AND QAP	90	102 Number
7002912040 BOLT GOST 7796 M12X40 88 GOST 7796 70 Physical Verification needed Description 7002912040 BOLT GOST 7796 M12X40 88 GOST 7796 70 Specification BOLT GOST 7796 M12X40 88 GOST 7796 70 Drawing no. BOLT GOST 7796 M12X40 88 GOST 7796 70 GOST_7796-70.pdf Manufacturing Technology ENCLOSED VQC_IN_BLANK_FORMAT_.pdf Testing / Inspection Facility ENCLOSED	70	2835 Number
7002108025 BOLT M8X1 6GX25 46 016 GOST 7796 70 Physical Verification needed Description 7002108025 BOLT M8X1 6GX25 46 016 GOST 7796 70 Specification BOLT M8X1 6GX25 46 016 GOST 7796 70 Drawing no. BOLT M8X1 6GX25 46 016 GOST 7796 70 GOST_7796-70.pdf Manufacturing Technology ENCLOSED VQC_IN_BLANK_FORMAT_.pdf Testing / Inspection Facility ENCLOSED	70	1608 Number

1446

OFM/PV/EOI/2019/10

Ordnance Factory Muradnagar

The General Manager,
Muradnagar
Muradnagar
Uttar Pradesh
201206

Name	Code	Quantity
MACHINING JOB WORK OF LUG 318 ITEM CODE 9449580029 Description MACHINING JOB WORK OF LUG-318 TO DRG NO-ARM-1302C5 FROM FORGING TO BE PROVIDED BY OFM SCOPE OF WORK AS PER ANNEXURE-A Specification AS PER ANNEXURE-A Annexure_A_Lug_318.jpg Drawing no. DRG NO-ARM-1302C5 ARM1302_C5_NEW_DRG__21-02-2023_LUG_318_NEW.pdf Manufacturing Technology 1.Centre Lathe 2. Milling Machine 3. Slotting Machine Manufacturing_Technology.pdf Testing / Inspection Facility NA	94	3200 Number
6206801117 BOLT 172 01 053 Physical Verification needed Description 6206801117 BOLT 172 01 053 Specification BOLT 172 01 053 Drawing no. BOLT 172 01 053 172_01_053.pdf Manufacturing Technology ENCLOSED VQC_IN_BLANK_FORMAT_.pdf Testing / Inspection Facility ENCLOSED	62	489 Number
MACHINING JOB WORK OF FILLING PLUG ITEM CODE 9449580031 Description MACHINING JOB WORK OF FILLING PLUG TO DRG NO-ARM-1172B5 FROM INPUT FORGING TO BE PROVIDED BY OFM SCOPE OF WORK AS PER ANNEXURE A Specification AS PER ANNEXURE A Annexure_A_filling_plug.jpg Drawing no. DRG NO-ARM-1172B5 NEW_ARM1172_B5_FILLING_PLUG.pdf Manufacturing Technology 1. Centre Lathe 2. Drilling Machine Manufacturing_Technology.pdf Testing / Inspection Facility Not applicable	94	1270 Number
MACHINING JOB WORK OF LUG 243 ITEM CODE 9449580030 Description MACHINING JOB WORK OF LUG-243 TO DRG NO-ARM1461D FROM INPUT FORGING TO BE PROVIDED BY OFM SCOPE OF WORK AS PER ANNEXURE -A Specification AS PER ANNEXURE -A Annexure_A_Lug_243.jpg Drawing no. DRG NO-ARM1461D ARM1461_D_NEW_DRG__21-02-2023_LUG_243_NEW.pdf Manufacturing Technology 1. Centre Lathe. 2. Milling Machine. 3. Slotting Machine Manufacturing_Technology.pdf Testing / Inspection Facility NA	94	3200 Number
9069112364 RACK TRAVERSING L70 IMB 000460 CN Physical Verification needed Description RACK TRAVERSING (L-70) IMB 000460 CN Specification RACK TRAVERSING (L-70) IMB 000460 CN 230053L7FO-_PT-A.docx Drawing no. IMB 000460 CN DRAWINGS_-_RACK_TRAVERSING_compressed.pdf Manufacturing Technology AS PER PART-A AND QAP IMB_000460CN_(QAP).pdf Testing / Inspection Facility AS PER PART-A AND QAP	90	120 Number
SUPPLY OF SET OF FRONT SIGHT ASSY AS PER 4 DRG No K 1023 K 1031 K 1032 K 1033 WITH FIRMS MATERIAL REQUIRED FOR TAR Physical Verification needed Description SUPPLY OF SET OF FRONT SIGHT ASSY AS PER 4 DRG No K 1023 K 1031 K 1032 K 1033 WITH FIRMS MATERIAL REQUIRED FOR TAR Specification SUPPLY OF SET OF FRONT SIGHT ASSY AS PER 4 DRG No K 1023 K 1031 K 1032 K 1033 WITH FIRMS MATERIAL REQUIRED FOR TAR Drawing no. K-1023 K 1031 K 1032 K 1033 DRG.pdf Manufacturing Technology AS PER 4 DRG No K 1023 K 1031 K 1032 K 1033 DRG.pdf Testing / Inspection Facility AS PER 4 DRG No K 1023 K 1031 K 1032 K 1033	70	18750 Set
SUPPLY OF FRONT SIGHT AS PER DRG No K 1022 WITH FIRMS MATERIAL REQUIRED FOR TAR Physical Verification needed Description SUPPLY OF FRONT SIGHT AS PER DRG No K 1022 WITH FIRMS MATERIAL REQUIRED FOR TAR Specification SUPPLY OF FRONT SIGHT AS PER DRG No K 1022 WITH FIRMS MATERIAL REQUIRED FOR TAR Drawing no. K-1022 Full_page_photo.pdf Manufacturing Technology AS PER DRG No K 1022 Full_page_photo.pdf Testing / Inspection Facility AS PER DRG No K 1022	70	18750 Number
PLASTIC MOULDED CARRYING CASE FOR 9SH Physical Verification needed Description LF 7425485620 PLASTIC MOULDED CARRYING CASE FOR 9SH, DRG. NO. OLF/MISC/1215 Specification LF 7425485620 PLASTIC MOULDED CARRYING CASE FOR 9SH, DRG. NO. OLF/MISC/1215 Drawing no. LF 7425485620 PLASTIC MOULDED CARRYING CASE FOR 9SH, DRG. NO. OLF/MISC/1215 Manufacturing Technology PACKING BOX PACKING_BOX_MACHINERY.docx Testing / Inspection Facility PACKING BOX	74	73 Number
LF 7440208979 Ballistic Mechanism Assembled as per Drg BL4 024 010 Excluding Following Components 1 Reticle as per Drg BL7 210 358 2 and 2 Reticle As Per Drg BL7 210 354 Description LF 7440208979 Ballistic Mechanism Assembled as per Drg. BL4.024.010 Excluding Following Components- (1) Reticle as per Drg BL7.210.358 2 & (2) Reticle As Per Drg. BL7.210.354 Specification LF 7440208979 Ballistic Mechanism Assembled as per Drg. BL4.024.010 Excluding Following Components- (1) Reticle as per Drg BL7.210.358 2 & (2) Reticle As Per Drg. BL7.210.354 Drawing no. LF 7440208979 Ballistic Mechanism Assembled as per Drg. BL4.024.010 Excluding Following Components- (1) Reticle as per Drg BL7.210.358 2 & (2) Reticle As Per Drg. BL7.210.354 Manufacturing Technology Manufacturing Technology manufacturing_technology_files.docx Testing / Inspection Facility Testing / Inspection Facility	74	50 Number

1447

EOI/PROVISIONAL/REGULARIZATION

Ordnance Equipment Factory

The General Manager,
Kanpur
Kanpur
Kanpur, Uttar Pradesh
208001

Name	Code	Quantity
BUCKLE BRASS QR 19 MM MALE AND FEMALE Description BUCKLE BRASS QR 19 MM MALE & FEMALE Specification SPECN. NO. CQA(GS)/US/324 EXCEPT THAT MATL. WILL BE BRS. INSTEAD OF ALU. i) MATERIAL FOR BUCKLE BRASS TO BE Cu Zn 30 (70:30) AS PER IS: 410-1991 (HARD TEMPERED) ii) BUCLE SHALL BE PRODUCED BY STAMPING. iii) BUCLE SHALL BE NICKEL CROME PLATE Cu/Ni 25 b Cr.r. As IS: 1068-1993 iv) BUCKLE TO BE FREE FROM SURFACE IRREGULARITIES & SHARP EDGES. BUCKLE_BRASS_PDF_FORM.pdf Drawing no. Manufacturing Technology AS PER SPECIFICATION BUCKLE_BRASS_PDF_FORM.pdf Testing / Inspection Facility AS PER SPECIFICATION	21	AS PER TENDER Set
PRESS BUTTON BRASS NICKLE COATED 10 MM Description PRESS BUTTON BRASS NICKLE COATED 10 MM Specification S.T.S. PRESS_BUTTON_10_MM.pdf Drawing no. Manufacturing Technology As per specification Item_with_specification_pdf.pdf Testing / Inspection Facility As per specification	21	AS PER TENDER Set
PRESS BUTTON BRASS NICKLE COATED 15 MM Description PRESS BUTTON BRASS NICKLE COATED 15 MM Specification AS PER SPECIFICATION Item_with_Specification_PDF.pdf Drawing no. Manufacturing Technology AS PER SPECIFICATION Item_with_Specification_PDF.pdf Testing / Inspection Facility AS PER SPECIFICATION	21	AS PER TENDER Set
PRESS BUTTON BRASS NICKLE COATED 10 MM Description PRESS BUTTON BRASS NICKLE COATED 10 MM Specification S.T.S. Drawing no. Manufacturing Technology As per specification Item_with_specification_pdf.pdf Testing / Inspection Facility As per specification	21	AS PER TENDER Ample
BUCKLE BRASS QR 19 MM MALE AND FEMALE Description BUCKLE BRASS QR 19 MM MALE & FEMALE Specification SPECN. NO. CQA(GS)/US/324 EXCEPT THAT MATL. WILL BE BRS. INSTEAD OF ALU. i) MATERIAL FOR BUCKLE BRASS TO BE Cu Zn 30 (70:30) AS PER IS: 410-1991 (HARD TEMPERED) ii) BUCLE SHALL BE PRODUCED BY STAMPING. iii) BUCLE SHALL BE NICKEL CROME PLATE Cu/Ni 25 b Cr.r. As IS: 1068-1993 iv) BUCKLE TO BE FREE FROM SURFACE IRREGULARITIES & SHARP EDGES. Drawing no. Manufacturing Technology AS PER SPECIFICATION BUCKLE_BRASS_PDF_FORM.pdf Testing / Inspection Facility AS PER SPECIFICATION	21	AS PER TENDER Set
WHEEL GEAR RH TO LF 3906401104 Physical Verification needed Description WHEEL GEAR RH TO DRG. No. 175.40.004/F Specification GOST 4543-71 GOST_4543-71_Pg_1_to_67.pdf Drawing no. 175.40.004/F 175_40_004.pdf Manufacturing Technology AS PER VQC VQC_175_40_004_F.pdf Testing / Inspection Facility AS PER QAP	39	165 Number
CASTING CASE TO LF 3806211057 Physical Verification needed Description CASTING CASE TO DRG NO: 172.28.002-1/C Specification GOST 2685-75 GOST_2685-75.pdf Drawing no. 172.28.002-1/C 172_28_002-1-C_compressed.pdf Manufacturing Technology AS PER VQC VQC_1.pdf Testing / Inspection Facility AS PER QAP	38	37 Number
BRACKET LH TO LF 3801063042 Physical Verification needed Description BRACKET LH TO DRG NO: 175.63.037-A/C Specification GOST 977 - 88 GOST_977_88_page_1_to_56.pdf Drawing no. 175.63.037-A/C 175_63_037-A-C.pdf Manufacturing Technology AS PER VQC VQC_1.pdf Testing / Inspection Facility AS PER QAP	38	89 Number

1448

OFK/2019/05/IV/3

Ordnance Factory Khamaria

The Cheif General Manager
Khamaria
Khamaria
Madhya Pradesh
482005

Name	Code	Quantity
CARTG CLIP FOR 76 62 SRGM LF 9911357314 Description CARTG. CLIP ASSY TO DRG.NO. TRD-2-1-1992. Specification CARTG. CLIP ASSY TO DRG.NO. TRD-2-1-1992. Drawing no. Manufacturing Technology (I) SHEET METAL WORK (II) PUNCHING FACILITY (III) RIVETING FACILITY (IV) PAINTING FACILITY 9911357314.png Testing / Inspection Facility (V) RELEVANT INSPECTION AND TESTING FACILITY	99	3172 Number
Cylinder No IND 31SV 241 A LF 6575363000 Description Cylinder No. IND- 31SV- 241 A LF 6575363000 Specification Cylinder No. IND- 31SV- 241 A LF 6575363000 Drawing no. Manufacturing Technology uploaded soon dummy_pm.pdf Testing / Inspection Facility uploaded soon	65	986 Number
WASHER AS PER DRG NO MKTA 754152 003 LF 9911358670 Description WASHER AS PER DRG NO MKTA 754152 003 TRD 1 1 3223 Specification WASHER AS PER DRG NO MKTA 754152 003 TRD 1 1 3223 Drawing no. Manufacturing Technology ATTACHED 9911358670.png Testing / Inspection Facility ATTACHED	99	24000 Number

1449

PV/OFCH/ADV REGD/JAN-20/69

Ordnance Factory Chanda

The Cheif General Manager
Chanda
Chanda
Maharashtra
442501

Name	Code	Quantity
2255568143 TIMBER MANGO SIZE 1200 MM X 120 SIM X 25 MM Description TIMBER MANGO SIZE 1200 MM X 120 SIM X 25MM TO SPECN.IND/ME/883 (F) DC5452-ME DT.01/06/2016 Specification SPECN.IND/ME/883 (F) DC5452-ME DT.01/06/2016 Drawing no. Manufacturing Technology • Sawing mill • Seasoning kiln • Sawing mill • Seasoning kiln • Sawing mill • Seasoning kiln • Sawing mill • Seasoning kiln • Sawing mill • Seasoning kiln Timber_Mango_compressed.pdf Testing / Inspection Facility a) Preservative treatment b) Moisture % c) Ultimate transverse Strength d) Raw material test from NABL lab as per specification IND/ME/883 (F) a) Preservative treatment b) Moisture % c) Ultimate transverse Strength d) Raw material test from NABL lab as per specification IND/ME/883 (F) a) Preservative treatment b) Moisture % c) Ultimate transverse Strength d) Raw material test from NABL lab as per specification IND/ME/883 (F) a) Preservative treatment b) Moisture % c) Ultimate transverse Strength d) Raw material test from NABL lab as per specification IND/ME/883 (F) a) Preservative treatment b) Moisture % c) Ultimate transverse Strength d) Raw material test from NABL lab as per specification IND/ME/883 (F)	22	1000 Number
2255568145 TIMBER MANGO SIZE 1200 MM X 82 MM X 28 MM Description TIMBER MANGO SIZE 1200 MM X 82 MM X 28MM TO SPECN.IND/ME/883 (F) DC5452-ME DT.01/06/2016 Specification SPECN.IND/ME/883 (F) DC5452-ME DT.01/06/2016 Drawing no. Manufacturing Technology • Sawing mill • Seasoning kiln • Sawing mill • Seasoning kiln • Sawing mill • Seasoning kiln • Sawing mill • Seasoning kiln • Sawing mill • Seasoning kiln Timber_Mango_compressed.pdf Testing / Inspection Facility a) Preservative treatment b) Moisture % c) Ultimate transverse Strength d) Raw material test from NABL lab as per specification IND/ME/883 (F) a) Preservative treatment b) Moisture % c) Ultimate transverse Strength d) Raw material test from NABL lab as per specification IND/ME/883 (F) a) Preservative treatment b) Moisture % c) Ultimate transverse Strength d) Raw material test from NABL lab as per specification IND/ME/883 (F) a) Preservative treatment b) Moisture % c) Ultimate transverse Strength d) Raw material test from NABL lab as per specification IND/ME/883 (F) a) Preservative treatment b) Moisture % c) Ultimate transverse Strength d) Raw material test from NABL lab as per specification IND/ME/883 (F)	22	1000 Number
2255568144 TIMBER MANGO SIZE 110 MM X 110 MM X 800 MM Description TIMBER MANGO SIZE 110 MM X 110 MM X 800MM TO SPECN.IND/ME/883(F) DC5452-ME DT.01/06/ 2016 Specification SPECN.IND/ME/883(F) DC5452-ME DT.01/06/ 2016 Drawing no. Manufacturing Technology • Sawing mill • Seasoning kiln • Sawing mill • Seasoning kiln • Sawing mill • Seasoning kiln • Sawing mill • Seasoning kiln • Sawing mill • Seasoning kiln Timber_Mango_compressed.pdf Testing / Inspection Facility a) Preservative treatment b) Moisture % c) Ultimate transverse Strength d) Raw material test from NABL lab as per specification IND/ME/883 (F) a) Preservative treatment b) Moisture % c) Ultimate transverse Strength d) Raw material test from NABL lab as per specification IND/ME/883 (F) a) Preservative treatment b) Moisture % c) Ultimate transverse Strength d) Raw material test from NABL lab as per specification IND/ME/883 (F) a) Preservative treatment b) Moisture % c) Ultimate transverse Strength d) Raw material test from NABL lab as per specification IND/ME/883 (F) a) Preservative treatment b) Moisture % c) Ultimate transverse Strength d) Raw material test from NABL lab as per specification IND/ME/883 (F)	22	1000 Number
2255568147 TIMBER MANGO SIZE 1200MM X 37MM X 80 MM Description TIMBER MANGO SIZE 1200MM X 37MM X 80MM TO SPECN.IND/ME/883(F) DC5452-ME DT.01/06/2016 Specification SPECN.IND/ME/883(F) DC5452-ME DT.01/06/2016 Drawing no. Manufacturing Technology • Sawing mill • Seasoning kiln • Sawing mill • Seasoning kiln • Sawing mill • Seasoning kiln • Sawing mill • Seasoning kiln • Sawing mill • Seasoning kiln Timber_Mango_compressed.pdf Testing / Inspection Facility a) Preservative treatment b) Moisture % c) Ultimate transverse Strength d) Raw material test from NABL lab as per specification IND/ME/883 (F) a) Preservative treatment b) Moisture % c) Ultimate transverse Strength d) Raw material test from NABL lab as per specification IND/ME/883 (F) a) Preservative treatment b) Moisture % c) Ultimate transverse Strength d) Raw material test from NABL lab as per specification IND/ME/883 (F) a) Preservative treatment b) Moisture % c) Ultimate transverse Strength d) Raw material test from NABL lab as per specification IND/ME/883 (F) a) Preservative treatment b) Moisture % c) Ultimate transverse Strength d) Raw material test from NABL lab as per specification IND/ME/883 (F)	22	1000 Number
2255568146 TIMBER MANGO SIZE 1000MM X 37MM X 110 MM Description TIMBER MANGO SIZE 1000MM X 37MM X 110MM TO SPECN.IND/ME/883(F) DC5452-ME DT.01/06/2016 Specification SPECN.IND/ME/883(F) DC5452-ME DT.01/06/2016 Drawing no. Manufacturing Technology Sawing mill Seasoning kiln Sawing mill Seasoning kiln Sawing mill Seasoning kiln Sawing mill Seasoning kiln Sawing mill Seasoning kiln Testing / Inspection Facility a) Preservative treatment b) Moisture % c) Ultimate transverse strength d) Raw material test from NABL lab as per specification IND/ME/883 (F) a) Preservative treatment b) Moisture % c) Ultimate transverse strength d) Raw material test from NABL lab as per specification IND/ME/883 (F) a) Preservative treatment b) Moisture % c) Ultimate transverse strength d) Raw material test from NABL lab as per specification IND/ME/883 (F) a) Preservative treatment b) Moisture % c) Ultimate transverse strength d) Raw material test from NABL lab as per specification IND/ME/883 (F) a) Preservative treatment b) Moisture % c) Ultimate transverse strength d) Raw material test from NABL lab as per specification IND/ME/883 (F)	22	1000 Number

1450

OFBL/ADV/33/STRAP TO DRG

Ordnance Factory Bolangir

The Cheif General Manager
Bolangir
Bolangir
Orissa
767770

Name	Code	Quantity
SHELL BODY WITH DRIVING BAND 107 TO DRG NO 3060202 DC 36490 A DTD19 11 1998 Physical Verification needed Description SHELL BODY WITH DRIVING BAND 107 TO DRG.NO. 3060202, DC:36490-A DTD.19.11.1998 AND SURFACE TREATED AS PER DRG.NO.3060203 DC-36490-A DTD.19.11.1998,EXTERNALLY PAINTED AS PER DRG NO. 6374 058 DC NO. 37586-A DT. 22.07.21 WITH PAINT RFU FINISHING STOVING AMMN. SC FINISH SPRAYING MIDDLE BUFF (ISC-359 OF IS-5-1978) TO SPEC. JSS-8010-12 INTERNALLY OIL SEALED WITH LIFTING PLUG TO DRG.NO.5191856 DC NO: 37595-A DT.08.12.21 AND GASKET TO DRG.NO.6391043 DC: 36695-A DTD. 08.08.2000. LOOSELY FITTED. Specification SHELL BODY WITH DRIVING BAND 107 TO DRG.NO. 3060202, DC:36490-A DTD.19.11.1998 AND SURFACE TREATED AS PER DRG.NO.3060203 DC-36490-A DTD.19.11.1998,EXTERNALLY PAINTED AS PER DRG NO. 6374 058 DC NO. 37586-A DT. 22.07.21 WITH PAINT RFU FINISHING STOVING AMMN. SC FINISH SPRAYING MIDDLE BUFF (ISC-359 OF IS-5-1978) TO SPEC. JSS-8010-12 INTERNALLY OIL SEALED WITH LIFTING PLUG TO DRG.NO.5191856 DC NO: 37595-A DT.08.12.21 AND GASKET TO DRG.NO.6391043 DC: 36695-A DTD. 08.08.2000. LOOSELY FITTED. Drawing no. Manufacturing Technology Shear cutting machine/Band saw for cutting billets having capacity minimum 15,000 Nos per month, Induction Furnace of capacity minimum 1000 KW for heating Billets, Hydraulic press for forging of capacity minimum 1000 MT, Press for nosing operation of capacity minimum 01 MT, Crimping Machine for Copper Band Crimping of capacity minimum 300 T, Hydraulic Pressure testing machine for capacity minimum 600 Bar, CNC machine for machining operation of capacity minimum 10,000 Nos. per month, MPI facility for capacity minimum 5,000 Amp, Seam Welding machine of capacity to weld minimum 10,000 Nos Shells per month, Ultrasonic machine for ultrasonic immersion method to cover all the portions of the shell volumetrically including the Flat bottom hole, Phosphating & Painting Facility @ minimum 10,000 Nos. shells per month, Shot blasting facility/machine, Quality control equipment for dimensional and quality checks. Manufacturing facility or Tie-up/MOU for Lifting Plug and Gasket shell_107_mod2_mfg.pdf Testing / Inspection Facility Hydraulic Pressure testing machine for capacity minimum 600 Bar, MPI facility for capacity minimum 5,000 Amp, Ultrasonic machine for ultrasonic immersion method to cover all the portions of the shell volumetrically including the Flat bottom hole, Quality control equipment for dimensional and quality checks.	62	10000 Number
6570250318 PACKING FITMENT FOAM SIZE 938 X 170X 13 MM Description PACKING FITMENT FOAM SIZE-938 X 170X 13 MM DET 2 QTY 2 NO 845 X 170X 12 MM DET 3 QTY 2 NO 938X320X13 MM DET 1 QTY 2 NO 280X170X6 MM DET 2 QTY 1 TO SPECN CROSS LINK POLYTHENE FOAM DENSITY 60-80 KG/M3 FOAM & DRG NO ARDE-1249 1ST 4 PKG & ARDE- 1250 LAST 2 PKG. Specification SPECN CROSS LINK POLYTHENE FOAM DENSITY 60-80 KG/M3 FOAM 1250 LAST 2 PKG. Drawing no. DRG NO ARDE-1249 1ST 4 PKG & ARDE- 1250 LAST 2 PKG Manufacturing Technology Sizing/Cutting Sizing/Cutting Sizing/Cutting Sizing/Cutting Sizing/Cutting Foam1_compressed.pdf Testing / Inspection Facility e) Raw material foam test from NABL lab as per specification IND/ME/1023 (Prov) f) General purpose engineering equipment's like Vernier, scale, tape etc. to measure dimensions e) Raw material foam test from NABL lab as per specification IND/ME/1023 (Prov) f) General purpose engineering equipment's like Vernier, scale, tape etc. to measure dimensions e) Raw material foam test from NABL lab as per specification IND/ME/1023 (Prov) f) General purpose engineering equipment's like Vernier, scale, tape etc. to measure dimensions e) Raw material foam test from NABL lab as per specification IND/ME/1023 (Prov) f) General purpose engineering equipment's like Vernier, scale, tape etc. to measure dimensions e) Raw material foam test from NABL lab as per specification IND/ME/1023 (Prov) f) General purpose engineering equipment's like Vernier, scale, tape etc. to measure dimensions	65	1157 Set
6334401041 BLACK CUSHION FOR HDC1 TO DRG NO HEMRL MICS SK NO 1470 Description BLACK CUSHION FOR HDC-1 TO DRG NO HEMRL MICS SK NO 1470 ( CUSHION-1 DET NO3 QTY NO 02 NOS CUSHION-II DET NO.5 QTY 04 NOS CUSHION III DET NO 6 QTY 04 NOS) MAT- EXPANDED CROSS LINKED POLYETHENE FOAM TO SPECN IND/ME/1023 (PROV) AS PER SPECN COLOUR SHOULD BE BLACK Specification SPECN IND/ME/1023 (PROV) Drawing no. DRG NO HEMRL MICS SK NO 1470 Manufacturing Technology Sizing/Cutting Sizing/Cutting Sizing/Cutting Sizing/Cutting Sizing/Cutting Foam_compressed_(1).pdf Testing / Inspection Facility c) Raw material foam test from NABLlab as per specification IND/ME/1023 (Prov) d) General purpose engineering equipment's like Vernier, scale, tape etc. to measure dimensions c) Raw material foam test from NABLlab as per specification IND/ME/1023 (Prov) d) General purpose engineering equipment's like Vernier, scale, tape etc. to measure dimensions c) Raw material foam test from NABLlab as per specification IND/ME/1023 (Prov) d) General purpose engineering equipment's like Vernier, scale, tape etc. to measure dimensions c) Raw material foam test from NABLlab as per specification IND/ME/1023 (Prov) d) General purpose engineering equipment's like Vernier, scale, tape etc. to measure dimensions c) Raw material foam test from NABLlab as per specification IND/ME/1023 (Prov) d) General purpose engineering equipment's like Vernier, scale, tape etc. to measure dimensions	63	1157 Set
LUG SUSPENSION NO 243 AND THRUSTER PLATE MACHINED L F NO 6250700173 Description LUG SUSPENSION NO. 243 AND THRUSTER PLATE (MACHINED). Specification LUG SUSPENSION NO. 243 AND THRUSTER PLATE (MACHINED). AS PER DRAWING NUMBER ARM 1461D. (R. NO. 2, DATED 05/10/01) Drawing no. AS PER DRAWING NUMBER ARM 1461D. (R. NO. 2, DATED 05/10/01) ARM_1461_D_LUG_SUSPENSION_243.pdf Manufacturing Technology 1.Forging Hammer (min 1 ton) of adequate capacity 2.Milling Machine PQC_LUG_243.pdf Testing / Inspection Facility 1.Chemical testing facility. 2.Mechanical testing facility (UTS,YS, elongation, hardness,impact). 3.Fatigue testing 4.Grainflow pattern testing	62	1539 Number

1451

2019000155

Ordnance Factory Dehu Road

The Cheif General Manager
Dehu Road
Dehu Road
Maharashtra
412101

Name	Code	Quantity	Approx Value	Select
PLUG FOR 81MM AT AL Description PLUG FOR 81MM AT-AL TO DRG NO 902.01.401 DC NO 17988 W DTD 20/06/1994 Specification DRG NO 902.01.401 DC NO 17988 W DTD 20/06/1994 Drawing no. Manufacturing Technology AS PER DRAWING 81-mm-at-al-plug-rubber_2023-02-15-10-49-26_baa28aa9001040eed099072b992cbd0d.pdf Testing / Inspection Facility AS PER SPECIFICATION	62	45300 Number

1452

3193000956

Small Arms Factory

The General Manager,
Kanpur
Kanpur
Kanpur, Uttar Pradesh
208009

Name	Code	Quantity
CLOSING CUP DRG NO 0204 03 04 00 03 001 00DA Physical Verification needed Description CLOSING CUP DRG. NO. 0204 03 04 00 03 001 00DA. Specification CLOSING CUP DRG. NO. 0204 03 04 00 03 001 00DA. Drawing no. 0204 03 04 00 03 001 00DA DRAWING.pdf Manufacturing Technology Machining Closing_Cup_Mfg_and_Testing.pdf Testing / Inspection Facility 1) Chemical & Mechanical properties as per std. given drawing /Specification. 2) Dimensional inspection for all dimension given in the drawing & other parameter which are mentioned in relevant drawing/specification.	70	468 Number
BODY HOUSING UPPER WELDING FOR JVPC Description BODY HOUSING UPPER WELDING FOR JVPC 5.56 X 30MM WITH BRACKET FRONT AND BRACKET REAR DRG NO. SK-57292 CONSISTING OF BODY HOUSING UPPER, CHANNEL LEFT, CHANNEL RIGHT, TUBE SPACER,BRACKET FRONT AND BRACKET REAR, BODY HOUSING UPPER Specification BODY HOUSING UPPER WELDING FOR JVPC 5.56 X 30MM WITH BRACKET FRONT AND BRACKET REAR DRG NO. SK-57292 CONSISTING OF BODY HOUSING UPPER, CHANNEL LEFT, CHANNEL RIGHT, TUBE SPACER,BRACKET FRONT AND BRACKET REAR, BODY HOUSING UPPER Drawing no. BODY HOUSING UPPER WELDING FOR JVPC 5.56 X 30MM WITH BRACKET FRONT AND BRACKET REAR DRG NO. SK-5729*2 CONSISTING OF BODY HOUSING UPPER, CHANNEL LEFT, CHANNEL RIGHT, TUBE SPACER,BRACKET FRONT AND BRACKET REAR, BODY HOUSING UPPER DRAWING_Body_Housing_Upper_Welding.pdf Manufacturing Technology Forming & Machining, Machining, Machining or MIM Route, Tig Welding and assy. Manufacturing_Technology_and_Testing_Inspection_Facility.pdf Testing / Inspection Facility 1) Chemical & Mechanical properties as per std. given drawing. 2) Dimensional inspection, for all dimensions given in the drawings & other parameter which are mentioned in relevant drawings.	70	227 Number
9081008304 BOOSTER LEAD FOR DHANUSH GUN TO DRG NO GCF 50 41023 Physical Verification needed Description 9081008304 BOOSTER LEAD FOR DHANUSH GUN TO DRG NO GCF/50/41023 Specification 9081008304 BOOSTER LEAD FOR DHANUSH GUN TO DRG NO GCF/50/41023 Drawing no. Drawing.pdf Manufacturing Technology As per drawing and QAP Drawing.pdf Testing / Inspection Facility As per drawing and QAP	90	39 Number
9081008366 EXHAUST HOSE COVER TO DRAWING NO GCF 50 41121 Physical Verification needed Description 9081008366 EXHAUST HOSE COVER TO DRAWING NO GCF/50/41121 Specification 9081008366 EXHAUST HOSE COVER TO DRAWING NO GCF/50/41121 Drawing no. Drawing_upload.pdf Manufacturing Technology As per drawing and QAP Drawing_upload.pdf Testing / Inspection Facility As per drawing and QAP	90	62 Number

1453

110190301

Ordnance Parachute Factory

The General Manager,
Kanpur
Kanpur
Kanpur, Uttar Pradesh
208004

Name	Code	Quantity
Tape Nylon 19 mm BS 1785 N Red Description Tape Nylon 19 mm BS 1785 N Red Specification ADRDE/QMS/TGTE/T/2022/03 dtd. 13.01.2022. Drawing no. Manufacturing Technology As per Specification/Drawing Tape_Nylon_19_mm_182_kgf.pdf Testing / Inspection Facility As per Specification/Drawing	2101221438	2 Metre
Tape Nylon 38 mm BS 3787 N 386 Kgf SG Description Tape Nylon 38 mm BS 3787 N (386 Kgf) SG Specification ADRDE/QMS/TGTE/T/2022/04 dtd. 13.01.2022 Drawing no. Manufacturing Technology As per Specification/Drawing Tape_Nylon_38_mm_386_kgf.pdf Testing / Inspection Facility As per Specification/Drawing	2101221433	102 Metre
Tape Nylon 38 mm BS 3787 N 386 Kgf Black Description Tape Nylon 38 mm BS 3787 N (386 Kgf) Black Specification ADRDE/QMS/TGTE/T/2022/04 dtd. 13.01.2022 Drawing no. Manufacturing Technology As per Specification/Drawing Tape_Nylon_38_mm_386_kgf.pdf Testing / Inspection Facility As per Specification/Drawing	2101221431	36 Metre
Tape Nylon 10 mm BS 893 N 91 Kgf SG Description Tape Nylon 10 mm BS 893 N (91 Kgf) SG Specification ADRDE/QMS/TGTE/T/2022/01 dtd. 13.01.2022 Drawing no. Manufacturing Technology As per Specification/Drawing Tape_Nylon_10_mm_91_kgf.pdf Testing / Inspection Facility As per Specification/Drawing	2101221429	432 Metre
Cypres Cordage Braided Cordage coreless Dyneema BS 1815 185 Kgf UD Description Cypres Cordage/Braided Cordage, coreless, Dyneema, BS 1815 (185 Kgf) UD Specification ADRDE/QMS/TGTE/C/2021/01/(a) dtd. 13.01.2022 Drawing no. Manufacturing Technology As per Specification/Drawing cordage_dyneema_185_kgf.pdf Testing / Inspection Facility As per Specification/Drawing	2101221446	24 Metre
Cordage Nylon BS 250 Kgf Cored Red Description Cordage Nylon BS 250 Kgf Cored Red Specification IS: 4227-vty. 12 Drawing no. Manufacturing Technology As per Specification/Drawing IS_4227.pdf Testing / Inspection Facility As per Specification/Drawing	2101221478	12 Metre
Tape Nylon Braided 2 3 mm 22 Kgf Treated Description Tape Nylon Braided 2-3 mm 22 Kgf Treated Specification ADRDE/QMS/TGTE/C/2022/07 dtd. 13.07.2022 Drawing no. Manufacturing Technology As per Specification/Drawing Tape_Nylon_Flat_Braided_22_kgf_(Lace).pdf Testing / Inspection Facility As per Specification/Drawing	2101221432	720 Metre
Tape Nylon 25 mm BS 2354 N 240 Kgf SG Description Tape Nylon 25 mm BS 2354 n (240 Kgf) SG Specification ADRDE/QMS/TGTE/T/2021/01(a) dtd. 13.01.2022 Drawing no. Manufacturing Technology As per Specification/Drawing Tape_Nylon_25_mm_240_kgf.pdf Testing / Inspection Facility As per Specification/Drawing	2101221430	726 Metre
Tape Nylon 19 mm BS 1785 N 182 Kgf SG Description Tape Nylon 19 mm BS 1785 N (182 Kgf) SG Specification ADRDE/QMS/TGTE/T/2022/03 dtd. 13.01.2022. Drawing no. Manufacturing Technology As per Specification/Drawing Tape_Nylon_19_mm_182_kgf.pdf Testing / Inspection Facility As per Specification/Drawing	2101221423	669 Metre
Cordage Dyneema BS 450 Kgf Resin Treated UD Description Cordage Dyneema BS 450 Kgf Resin Treated UD Specification ADRDE/QMS/TDTM/C/2012/02(a) dtd. 12.07.2022 Drawing no. Manufacturing Technology As per Specification/Drawing CORDAGE_DYNEEMA_BS_450_KGF.pdf Testing / Inspection Facility As per Specification/Drawing	2101221427	4908 Metre
Tape Nylon Black Stretch 26 mm BS 1050N BS Description Tape Nylon Black Stretch 26 mm BS 1050N BS Specification ADRDE/QMS/TGTE/T/2019/07 Date: 21.06.2019 Drawing no. Manufacturing Technology As per Specification/Drawing ADRDE_QMS_TGTE_T_2019_07_DT_21_06_2019.pdf Testing / Inspection Facility As per Specification/Drawing	2101787004	969 Metre
ALUMINIUM ALLOY BILLETS OF GRADE ABT 101 SPECIFICATIONS OST B3 75 86 AND SIZE DIA 485 X 600 MM LENGTH SCOPE OF SUPPLY AS PER ANNEXURE B Physical Verification needed Description ALUMINIUM ALLOY BILLETS OF GRADE ABT 101 SPECIFICATIONS OST B3-75-86 AND SIZE: DIA 485 X 600 MM LENGTH. SCOPE OF SUPPLY AS PER ANNEXURE – B Specification ALUMINIUM ALLOY BILLETS OF GRADE ABT 101 SPECIFICATIONS OST B3-75-86 AND SIZE: DIA 485 X 600 MM LENGTH. SCOPE OF SUPPLY AS PER ANNEXURE – B Annexure_B.pdf Drawing no. Manufacturing Technology Annexure- B Pre-qualification Criteria (PQC) PQC-485_mm.pdf Testing / Inspection Facility QMI	00	10000 Kilogram

Proceed